Warp 9 Dual Sport wheels are built with billet hubs, 7000 series aluminum rims and laced and trued with stainless steel spokes and nipples. NAK seals, OEM bearings, Zinc plated nyloc hardware.
The 1.85" x 21" front wheel includes a wave brake rotor.
The 2.15" x 18" rear wheel is built using an upgraded cush drive hub that includes a rear brake rotor already mounted.
Rear wheel includes a Sprocket Carrier with 7075 T6 aluminum 45T sprocket installed that matches selected hub color.
Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.
Please allow 2-3 weeks for delivery.
Cannot be canceled.
The ProCycle seat was designed for both comfort and function. Our seat is built with a premium denser foam for those long days in the saddle also giving you freedom to move while standing.
- Wide and firm saddle adds comfort on long rides
- Narrowing taper up front allows room for knees when standing
- The vinyl weave pattern allows airflow between you and the seat
- Provides grip down the sides allowing you to hold on with your knees
We will build the seat for you in house on a new seat pan so all you have to do is put it on and go ride.
Choose the heated seat option and we will add a Seat Warmer during the build process.
Easily turn your blinkers into additional running lights and brake lights (rear) for added visibility.
White light in the front and red in the rear. Rear red running lights and bright red brake lights. You can omit the running and brake lights if you wish and still have the best blinkers on the market.
Dazzling bright Amber blinker functions.
All in a spring-loaded stock to prevent damage from a tip over, crash or impact with brush, trees etc. They will bend 360 degrees, but are stiff, durable and nearly unbreakable.
If you have a single indicator light for the blinkers that is not built into the display and is not LED you will need the diode kit (AKA DR650) If it is built in to the speedo display it should not require the diode kit.
Available in a generic kit with Bullet connectors supplied. Great for your DR or almost any other bike with a single post blinker setup. These will work well on bikes that use a flasher, but you might have to add the female side of the connectors that are included in the kit.
Not for Yamaha T7, see model specific listing
This kit provides some much needed protection for both you and your big DR. Handguards and deflectors protect your hands while the skid plate and Case Armor will cover your baby's soft externals.
- Aluminum Handguard Kit in silver for standard 7/8" bars or 1-1/8" oversize bars
- Spacers so you don't have to cut your balls off (your levers that is!)
- Aluminum Skid Plate
- Stainless Steel Case Armor covers for both right and left hand sides
- Plastic Deflectors - Currently only available in SMALL BLACK
Yoshimura has paired their legendary RS-2 exhaust pipe with the Kawasaki KLR 650. The KLR 650 has literally been ridden around the world, and now with our fire-breathing RS-2 slip-on exhaust system, you can do it faster - and in style!
Assembly comes complete with:
- Stainless muffler sleeve
- Stainless steel mid-pipe
- All installation hardware
- Detailed instructions
- Trick, turn-down tip inserted in the endcap
- Dual stainless steel mounting brackets
- High-quality chrome steel exhaust springs with spring vibration dampers with the Yoshimura logo molded in
- Plastic end cap to plug the pipe during washing
- Super-trick spring pulling tool
Sargent's proprietary seat foam is their own unique blend of resilience, firmness, and vibration-absorption qualities - making it well suited for maximum long distance comfort. Available in standard height and 1" lower than stock. These seats will fit bikes with the stock, IMS, or other any aftermarket fuel tank.
Individual 14T, 15T or 16T front sprockets.
JT Sprockets are made from the latest generation of computer design and control metal cutting equipment for maximum durability. Front sprockets are made from chromoly SCM420 steel alloy. All sprockets are heat-treated and hand-finished to meet or exceed the highest possible quality standards.
Motoz Tractionator Desert H/T series of tires are renowned for great traction and long wear life. These tires are designed to handle hard terrain, fast and rocky trails as well as gravel roads and desert hard pack. Tricky off-cambers, ruts and hard braking at extreme lean angles are no problem for this DOT approved tire.
Note: Tubes can be run in Tubeless tires, but a Tube Type tire cannot be run Tubeless.
These grommets are new Yamaha equipment and are used to help connect your side panels to the fuel tank on any year TW200.
If you are purchasing an IMS fuel tank you may need to purchase a set of these grommets as you will have to reuse your old grommets from the stock fuel tank.
Formerly DSA, now ProCycle brand, is a plastics kit in three colors - Black, White, and Blue, as well as Blue fenders with White side panels and Black fenders with White side panels. (headlight cowl not included).
Vacuum molded, these parts are a design improvement over the stock pieces. The side panels have a crisper, more angular look than the stock parts while the front fender is shaped like the DRZ400SM OEM front fender. Big enough to be functional without wind-steering the bike like the stock fender does.
Kits include front and rear fenders, a new LED tail/brake light and license plate holder, and both side panels.
Add a fresh new side panel hardware kit and an adhesive heat shield for a fresh off the showroom floor look.
Add a stock Suzuki headlight cowl if you are doing a complete color change to your DR (must select plastic kit with head light cowl option)
- Cork-based clutch material impregnated with aluminum particles to increase wear life and heat resistance
- Highly compressed construction avoids swell and clutch drag
- Ideal for general-purpose street/sport/touring bikes
- Kit includes complete engine set of friction plates only
- See your owners manual on oil type and install instructions to avoid clutch burn up or slippage
We have worked closely with Magura to come up with a kit that fits properly.
Want an easier pull on your DR clutch? No cable to break? Then say hello to the Magura Hymec Hydraulic Clutch. Simply remove the stock perch, lever and cable in bolt this in its place. This system replaces the stock cable with a small lightweight hydraulic system for improved clutch control, easier operating pressure, a constant pressure point and smoother actuation.
Developed over many years and tested under the toughest conditions possible in the off-road motorcycle world. World champions to novices all agree on the benefits of the Hymec Hydraulic Clutch system. Due to demand, Magura is now making this available for many dual-sport motorcycles, and now the DR650!
Never hurts to have a bit of the Margura specific Blood Red hydraulic fluid sitting on your shop bench. 4 oz. bottle available as an option.
Mapping America's Back Roads
Amazingly detailed, large-format topographic & street map atlases of all 50 U.S. states. Unbeatable recreational information & detail.
Map detail includes:
- Back roads, dirt roads and trails
- Elevation contours
- Remote lakes and streams
- Boat Ramps
- Public lands for recreation
- Land use / land cover – forests, wetlands, agriculture
- Trail heads
- Campgrounds
- Prime hunting and fishing spots
Sport Carbon pads:
- Carbon graphite "X" pads blended with Aramid for leisure/sport use
- Low heat generation
- Best for fast, dry riding; not for mud, water, or sand
- Offroad, Semi-sintered metal
Sintered Pads:
- The perfect brake pads for leisure use
- Offer maximum durability and excellent braking performance
- Constructed of U.S.-made sintered bronze for longest lifetime
- Best for riding in water, mud, dust, or sand
Race Sintered:
- High performance race pad with superb durability similar to that of the sintered pad.
- Higher friction level and fade resistance
- Diamond ground surface finish to speed bed-in
- Comes with new pad pins
Includes front and rear brake pads