Search Products

Corbin has replaced the stock two-piece seat with a single seat model to provide more structural support. Corbin has created two models, one to maintain the stock seat height, and one to provide an easier ground reach like the stock seat in a lower position. By designing each seat specifically, they were able to keep excellent ergonomics. Corbin's saddles are designed to work with the optional Honda saddlebags. Mounts to the motorcycle similar to stock and secures with the Honda key lock system. All brackets are included and pre-mounted on the seat so it's ready for immediate installation.

Passenger seating area is designed with a neutralized platform to resist sliding forward in the saddle. Dished shaping provides an excellent contact patch and maintaining a clean look. For the best combination of looks and support, add the Ovalbac backrest as shown. This backrest provides a generous, contact patch for excellent support. Angle adjustment is simple and can be performed without removing the saddle or backrest from the bike. Please note, the Corbin backrests may not work in the saddle if you are using the Honda trunk.

Want to add a bit of convenient storage without installing a trunk? Corbin's glovebox is an excellent solution for all your quick-access stuff. Simply replace the finishing plate on the Ovalbac backrest and you've just added four liters of locking storage capacity. It's plenty for a couple bottles of water, cell phone, spare gloves, maps and other incidentals. Constructed of durable ABS plastic and available plain or prepainted black.

The design shown includes Black Grabber seating with Asphalt vinyl contrasting sides and nose with a tasteful color coordinated welt. Default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'no welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.

The X-Grip is a frame guard that allows the rider to both protect the frame of the motorcycle from wear as well as adding more grip to the bike. Made from a dual injected mold; The outer plastic is durable polycarbonate while the inner plastic is durable yet playable and offers incredible grip.

Features:

• Protects the frame in the maximum friction area
• Use of rubber to increase grip and therefore control of the motorcycle
• Easy assembly and dismantling with expander and plastic bands

Available in 2 colors

The Honda CRF1100 DCT Bash plate is a full coverage Rally style protection for frame rails & lower to mid engine cases. Constructed for more serious off road use in mind, it features multiple additional mount points, paired with a semi double skin 4mm 5083 aluminum Bash plate. All CNC machined and fully tig welded, the side wings are partial double walled for extra stiffness. It also features the addition of a HDPE end plate for the clutch case mated to a rubber puck insert on the plate for additional protection.

Finish Options

• Polished or Black Powdercoat

Whats Included-

• Heavy Duty Bash plate
• Engine Puck/ Bash PLate Puck
• 2 Mild steel mount brackets
• All mounting fasteners

Additional Info-

• Fits with genuine centerstand

• Kits contain all parts needed to re-seal leaking master cylinders
• Includes cup seals, copper washers, o-rings and spring, and clips where applicable

The Galfer steel braided brake lines for the big Twin CRF1000L replace the stock rubber lines to enhance braking performance. Stock rubber lines expand under pressure giving a spongy and inconsistent feel at the lever/pedal.

This kit includes all 7 lines involved in the ABS braking system front and rear. These high quality lines utilize the finest materials available to eliminate expansion: Teflon inner hoses wrapped in 64 strand staInless steel weave, heavy duty hardware and machined fittings. A Crush Washer relief channel provides an effective double seal to stop leakage. Each line is replaced from the master cylinder all the way to the calipers and labeled to help with installation.

All the parts of this kit are designed, engineered, manufactured, tested and quality assured in the USA! All of these parts come with a lifetime warranty. Everything needed is included: Brake Lines, fittings and all necessary hardware and detailed instructions.

Double-H sintered metal brake pads feature the HH friction rating, the highest in the industry. These pads provide maximum brake effect and last twice as long as organic pads.

Set includes pads for both front calipers.

Galfer USA produces several different brake pad compounds for all types of riding styles and uses. With over 60 years of friction material production and research, they have learned that one compound doesn’t always do the trick across the board. If you are just looking for an OEM brake pad replacement or a high performance race brake pad, they have you covered!

Set includes front and rear brake pads.

These DP Standard brake pads are our OEM replacement sintered metal compound. Ideal for everyday use, both on and off-road. They provide excellent all-round braking hot or cold, wet or dry. Where applicable a high-tech ceramic heat shield is applied to the rear of each backplate to reduce the heat transfer into the fluid and prevent brake fade. They have one of the lowest wear rates on the market, very low levels of brake dust and no noise and no thermal cycle bedding-in required are also benefits of the DP Standard brake pads.

• Organic brake pads contain man-made high-performance fibers that are used for their light weight, high strength abrasion resistance and thermal stability. These Aramid fibers have a high strength-to-weight, thermal stability and abrasion resistance to provide advantages over steel fiber-based products. They provide excellent stopping power without noise and rotor galling but still provide fingertip control and strong, predictable brake response.
• Double-H sintered metal brake pads feature the HH friction rating, the highest in the industry. These pads provide maximum brake effect and last twice as long as organic pads.
• Semi-sintered pads have an all new recipe containing 30% copper by weight with an organic matrix. This design combines the long life of a sintered pad with the great feel and lack of rotor damage common with full-sintered pads. These can be used to replace Kevlar or sintered metal compound pads.

Small scuffs on the inside of the bash plate as shown in image, does not affect performance or fitment.  Polished finish only, sold as is, all hardware included. Does not qualify for free shipping.

The Honda CRF1100 DCT Bash plate is a full coverage Rally style protection for frame rails & lower to mid engine cases. Constructed for more serious off road use in mind, it features multiple additional mount points, paired with a semi double skin 4mm 5083 aluminum Bash plate. All CNC machined and fully tig welded, the side wings are partial double walled for extra stiffness. It also features the addition of a HDPE end plate for the clutch case mated to a rubber puck insert on the plate for additional protection.

Finish Options

• Polished or Black Powdercoat

Whats Included-

• Heavy Duty Bash plate
• Engine Puck/ Bash PLate Puck
• 2 Mild steel mount brackets
• All mounting fasteners

Additional Info-

• Fits with genuine centerstand

• Seal profile is engineered to create equal pressure in each seal lip; equalized seal pressure creates less drag and longer seal life
• Patented MAX-LIFE has a coefficient of friction up to 3 times less than the OEM seal material
• Triple-lip seal design
• Dyno-tested to last 3 to 4 times longer than OEM seals
• Directional ribs allow seal to be installed easily
• Kit includes fork seals and dust wipers
  
   

Save time and money with this complete OEM quality fork bushing kit.

• Kits include fork leg and slider bushings along with any needed snap rings, o-rings and copper washers

Complete kit to replace the bearings and seals in your shock linkage. Includes the lower shock bearing.

The progressive factory springs are well known to be way to soft for most riders. Cogent Dynamics straight rate springs will give better control in the rough stuff and when loaded up.

Sold in pairs.

The .72 springs are 28% stiffer than stock and will be a great choice for most riders

Not compatible with Adventure Sport ES

Replace these any time you feel excessive play in the sprocket hub.

Excessively worn dampers can cause the cush hub bearing to fail - which will ruin your sprocket carrier.

Sold as a full set.

Like most machines, the OEM pegs on the Africa Twin are for the birds. They are small and provide a minimalist platform to control the motorcycle and they are uncomfortable if you stand on them for very long. You can install new, larger pegs or you can bolt on these beautiful aluminum extenders on top of the stock units. You can see the stock peg inside the topper in the upper image.

If you stand for very long these pegs will pay for themselves quickly. CNC machined with slightly rounded edges on the teeth so they won't eat up the soles of your boots, then anodized black, these are pretty and functional. 2.32" x 3.38" is nearly double the contact area of the stock pegs. Mounting hardware and detailed instructions are included, making installation a snap.

• Designed as a drop-in replacement to upgrade OEM ball-type bearings to taper bearings (where ball-type bearings are used by the OEM)
• Designed as a replacement taper bearing seat (where taper bearings are original equipment)
• Kits come complete with both upper and lower taper bearing cups and cones and seals (both top and bottom seals are included in most kits)
• Tapered roller bearings decrease maintenance along with less wear and longer life

• Increased tank 25L / 6.6 Gallons.
• Impact and abrasion-resistant.
• Lighter than the original in steel.
• Ideal for both tourism and competition.
• Designed to maintain a narrow profile to ensure an excellent fit.
• Compatible with tubular engine guards/fairings.
• Perfectly compatible with the original pump and level switch.
• Possibility to assemble Quick Fill cap.
• E800033Z approved for use on EU road.
• Compatible with E5 E10 petrol.

Included with the tank:

• Acerbis cap
• Vent pipe
• Assembly kit

These quality JT sprockets are made from the finest 545C high carbon steel and are then heat treated and hand finished to meet or exceed OEM standards. Outlasts many mild steel or surface hardened sprockets as much as two and three times over.

These quality sprockets are made from the finest 545C high carbon steel and are then heat treated and hand finished to meet or exceed OEM standards. Outlasts many mild steel or surface hardened sprockets as much as two and three times over.

The genuine factory shop service and repair manual. This is the reference manual Honda dealers use in their service departments. It has all the necessary info to do maintenance or repairs to your Africa Twin CRF1100L.

Quality genuine Honda replacement levers. Standard length.

Zeta Revolver Shift Lever

• Rotating shift tip provides 6 different positions, offer more sensitive shift position adjustment.
• Shift arm is made of A2014 forged aluminum for durability.
• Forged arm is black anodized finish with laser print logo.
• Foldable shift tip is made of CNC aluminum with knurled finish for better shift grip.
• Shift tip is color anodized with ZETA laser print logo.
• Replacement shift tips and tip mounts are available.

• Precision engineered to perfectly fit the factory airbox, these filters meet or exceed OEM specifications
• Direct replacement of original equipment filter with no need to change carburetor jets or settings
• Manufactured from world-class materials to achieve optimum performance and engine protection

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.

Here's an easy way to add a Tach to your motorcycle. 

• Tachometer from 0-19,999 rpm
• Non-resettable hour meter from 0-99,999 hours
• Easily mount it to any surface using either the bolt-on (screws not included) or peel-n-stick mounting options
• "Wrench Icon" with hours
• The smallest available meter at 50 x 25 x 14mm and has large, easy to read digits

Built with the latest in Lithium Iron Polymer Technology. All components are designed, manufactured, assembled and packed in one location assuring high quality and consistency. Besides extreme lightweight (50% to 70% lighter than standard lead-acid batteries) it also features a built-in LED test gauge and the ability to mount it in any position. There is no hazardous acid or heavy metals, it is non-explosive and non-combustible. Integrated BMS (Battery Management System) with cell balancing and overcharge protection

The Firepower features Increased cranking amps over lead acid batteries and has a very fast recharge cycle and can be brought up to a 90% charge within 6 minutes and also has 6 to 12 times more cycle life when compared to lead acid batteries. A 3-year warranty insures that your investment is protected.

Rated at 220 CCA (Cold Cranking Amps)
Package Dimensions: 4.75 x 3.00 x 4.50

Pro Moto Billet products are beautiful. Strong, functional and beautiful. CNC machined from 1/2" thick 6061 aluminum. Once complete, the rack is then 'hard black' anodized for durability, protection from the elements and ease of maintenance. All fasteners are stainless steel to continue the ease of maintenance theme.

Available in black only.

• The original Hiflofiltro factory was founded in 1955 and has been manufacturing filters for the OEM motor industry since 1963.
• Constructed using the best materials available.
• With the experience of more than five decades, constant research and development and featuring a completely modern production facility, Hiflofiltro offers some of the best quality filters in the world.
• TUV approved and production monitored to ensure OEM or better quality.
• Sold as a package of 5 oil filters.

Iridium spark plugs are made with premium quality materials.

Iridium plugs last longer than standard ones, meaning you won't have to replace them as often.

• The ultimate in the evolution of spark plug technology and performance from an industry leader
• The iridium electrode is 25% smaller than a platinum electrode, and it's just 1/4 the size of a conventional nickel electrode
• Ultra-small diameter center electrode reduces voltage requirement and extends ignition system life
• Metal shell plating has enhanced anti corrosion qualities

Sold individually, unless otherwise stated.