Spring time is in full swing here at ProCycle. With these busy days please be sure to let us know if your order is time sensitive. We try to do as much as we can to accommodate your upcoming trip.
The Powercore 4 spark arrestor muffler. FMF developed the Powercore 4 to increase the horsepower and torque throughout the entire power curve. Highest quality packing for long life. Removable spark arrestor included. Louder than the Q4. Approximately 99db stock or about 94db with optional Quiet Insert installed.
Uses long-life muffler packing for increased packing life
Forest Service approved spark arrester
Delayed stock from manufacturer, please ask for availability.
The PowerBomb header promotes better flow by allowing a small expansion of the exhaust gasses. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels.
Built with the latest in Lithium Ion Polymer Technology. All components are designed, manufactured, assembled and packed in one location assuring high quality and consistency. Besides it's extreme lightweight (50% to 70% lighter than standard lead-acid batteries) it also features a built-in LED test gauge and the ability to mount it in any position. There is no hazardous acid or heavy metals and it is non-explosive and non-combustible.
The Firepower features Increased cranking amps over lead acid batteries and has a very fast recharge cycle and can be brought up to a 90% charge within 6 minutes and also has 6 to 12 times more cycle life when compared to lead acid batteries. A 2-year warranty insures that your investment is protected.
145 CCA 12V/28.8WH Package Dimensions: 4.75" x 3.00" x 4.50
A 'wrench style' tool to turn the 'square top' tappet screws. The wrench does a better job of holding the adjuster screw still while tightening the locknut. Slim and flat, this tool is easy to carry in a tool pack.
Keep your motor running right with fresh spark plugs!
NGK is one of the world's largest manufacturer of spark plugs, whose products are used as original equipment (OE) on countless motorcycle and automobile models.
High-quality materials and superior construction for serious power and reliability
Pure alumina silicate ceramic insulator provides high strength and better heat transfer
Deep-seated copper core for a wider heat range
Nickel alloy tip for longer life
Trivalent metal plating provides superior anti-corrosion and anti-seizing properties
Choosing the right high-quality plugs prevents fouling from running too cool and preignition from running too hot
NGK plugs available for almost every application and riding style
Helps protect vulnerable fork tube and seal from dust, dirt, and corrosive elements. Hook & loop (Velcro) fastening on back side makes installation or removal for cleaning a breeze.
Sized perfectly for adult back-yard racing or fast/aggressive mini riders. This is the most important upgrade you can make for an adult sized rider. The stock suspension is too soft for most adults and aggressive kids.
ProCycle Rev Box increases the rev limit to 10,000 RPM. In addition, this unit offers a re-mapped timing curve which yields a noticeable increase to horsepower and torque over the stock CDI
This CDI box is a direct plug in replacement CDI. Simply locate and remove the stock CDI, and plug the unit directly into the wiring harness, no modification needed. Suitable for stock and modified machines
Our latest crf230f rack is designed for superior strength in mind for use in commercial and rural conditions. The main part of the rack in constructed from mild steel which connects to the subframe in 3 points and is designed to stiffen the assembly to carry a decent pay load. The top plate of the rack is 5mm aluminum with multiple tie down points and predrilled for rotopax/ fluid tanks which are available separate.
Luggage Plate:
Total Width Approx 29cm
Total Length Approx 33cm
Carry Rack:
Total Width Approx 15cm
Total Length Approx 20cm
Carry Rack and Luggage PlateTotal Length Approx 54cm
This bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.
Sized perfectly for adult back-yard racing or fast/aggressive mini riders. This is the most important upgrade you can make for an adult sized rider. The stock suspension is too soft for most adults and aggressive kids. Fits stock shock.
The V2 Series Slip-On muffler features an aluminum body, TIG welded components, stainless steel inlet tube and a great new look. This Lightweight Slip-On weighs approximately 5.5 lbs.
The DG Performance systems offer increased throttle response, power and torque. Standard sound level is approximately 98 db. Equipped with a US Forestry approved spark arrestor.
The Trail Tech Vapor Speedometer/Tachometer units are custom designed for an exact fit. They feature a bright white backlit LCD display, waterproof connections, and all parts needed for a complete installation. These units accept AC and DC power input, and automatically switch to internal power if external power is removed. Power connectors are included. Permanent solid-state memory guarantees that data is never lost, even without power. Units are available in black.
Trail Tech provides a one year warranty and unlimited free phone and email support.
Unit functions:
Speedometer
Current Speed
Maximum Speed
Selectable MPH/KMH Display
Tachometer
Real-Time RPM Bar Graph
Numeric RPM Readout
Dual Programmable Shift Lights
Up to 20,000 RPM
Temperature
Ambient Temperature
Engine Temperature (liquid cooled only, optional air cooled sensors available)
Includes the Enduro Series RS-2 muffler and stainless steel header. This potent and versatile design is engineered to provide increased power and power delivery. The RS-2 has a pyramidal shape that features increased volume, and is a quieter system with a larger core — and it offers the added bonus of outstanding performance in a value-priced package.
We start with Excel or Sun rims, OEM hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike.
Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.
New OEM hubs with bearings and seals installed
Excel 2.5" x 17" or Sun 2.75" x 17" front rim
Excel or Sun 3.5" x 17" rear rim
Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples
Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.
Custom made: Please allow 2-3 weeks for delivery. Cannot be canceled.
