Same-day shipping cutoff: Noon Pacific Time

Search Products

Lighting

Turn Signal

DR650 '96 - '26 950 Adventure '03 - '05

If you just installed aftermarket LED turn signals or an LED integrated tail light and your turn signals are flashing way too fast, or perhaps simply staying on completely, you're at the right place to find the solution! The TST Gen2-SK LED Flasher Relay fixes what we call "hyperflash". It slows the flash rate down to a pre-set 85 cycles per minute but can be sped up or slowed down using the adjustment dial located within the unit so you can get the exact speed you are looking for. The plug-and-play installation means that you don't need to splice in any load balancing resistors that generate unnecessary heat and require splicing into your stock wires. Simply remove the stock relay and install your new TST relay and your wiring job is done. It's that simple!

  • Slows turn signal flash rate down to an adjustable 85 cycles per minute when turn signals are experiencing hyperflash or stay on continuously
  • Adjustable turn signal flash rate enables you to speed up or slow down the flash rate to fit your preference
  • Plug and play installation meaning no cutting, splicing, or soldering
  • Replaces the stock relay and fits like OEM
  • No need for cumbersome and heat-generating load balancing resistors
  • Flexible relay housing enables easy access to the flash rate adjustment dial inside of the relay unit

Please make sure your bike uses a 2-pin relay for the signaling system. If your bike has hazard lights it may need the 4-pin relay. Please also note the pin configuration and make sure it matches what is on your bike. It is very important to verify fitment before making your purchase.

Ships in 3-5 business days
$22.95

Tail Light

DR200 '96 - '26 DR650 '96 - '26 KLR650 '87 - '18 990 Adventure '07 - '13 950 Adventure '03 - '06 TW200 '87 - '26 V-Strom (DL1000) '02 - '14 V-Strom (DL650) '04 - '26 XR650L '93 - '26 XT225 '92 - '07 XT250 '08 - '26 DR350S '90 - '93 DR350SE '94 - '99

This device will pulse your brake light automatically. There are over 1000 possible pattern combinations with individually programmable Flash Speeds, Pre-Delay, and Flash Durations, as well as a disable feature to disable the unit. This device gives the end user the widest range of possibilities for customizing your tail light safety flash. With simple programming setup using only your brake lever, their is no disassembly or removing of the seat required to change the programming on the device.

Features:

  • Independently programmable flash speed, flash duration, and pre-delay
  • Works for LED or Standard Bulb Tail Lights
  • All Solid State design
  • Meets or exceeds OEM load rating specifications
  • Over 1000 possible flash pattern combinations
  • Simple programming setup with your brake lever
  • Extremely compact unit size; 20mm x 20mm x 12mm
Choose Model
Ships same business day
$59.95
DRZ400S '00 - '24 DRZ400SM '05 - '24

There is a lot of technology packed into this tail light/fender eliminator kit. You have programmable turn signals and Safety Brake Pulsing both built into this product.

You can enable or disable the safety brake pulsing feature.
This kit includes only the highest quality components, including the pre-installed 12oClockLabs processor board, which is made in the USA.

  • Plug and Play
  • 7 Different Programmable Turn Signal Patterns 
  • Safety Brake pulsing built in (Can Enable or Disable)
  • Superbright LED's; For excellent brightness, even in direct sunlight
  • License Plate Light built in
  • License Plate Bracket fits the common USA license plates, sloted for maximum plate compatibility.
  • Includes Mounting Hardware
  • Saves about 2 lbs over the factory tail light setup
  • Made In the USA

We recommend a "Fixed Rate Flasher" unit for use with this kit. When you install aftermarket signals it changes the load on a factory signal system.

This kit does not include parts to mount aftermarket turn signals. The pre-installed processor board allows the turn signals to be integrated in to the tail light.

Add Turn Signal Flasher
Ships in 1-2 weeks
$179.95

Auxiliary Lights, Mount

JNS has come up with another great addition for the little XT250. Auxiliary light mounts that keep the lights up high for great projection, but still good and tight to the bike for protection. These heavy duty 1/8" stainless steel mounts put your lights out of harms way without interfering with controls, body work, or the fuel tank. Includes four longer upper triple clamp bolts. Everything but the lights themselves to light your way through the darkness.

Ships same business day
$27.95

Headlight

This kit is not just a bulb, but an entirely new LED specific headlight! A specially designed adjustable steel mounting bracket replaces the stock unit. Included is a wiring harness and all the required hardware to make this installation quick and easy and entirely plug and play. No cutting, drilling, or wiring modifications are necessary. The headlight features separate low and high beam projectors in a custom headlight shell designed specifically for this LED bulb.

This kit is available with either a chrome or black chrome reflector in the headlight.

Check out the images for stock vs. LED patterns and brightness. (Images are of a DR/DRZ unit, but the light unit is the same as that on the XRL.)

Choose Color
Ships same business day
$119.95

Body

Front Fender

DR650 '96 - '26 DR350S '90 - '93 DR350SE '94 - '99 DRZ400S '00 - '24 DRZ400SM '05 - '24 DRZ400E '00 - '07 DRZ400 '00 - '03

Genuine Suzuki super moto fender. A perfect match for the original gray plastic.

Ships same business day
$139.95
KLR650 '87 - '07 KDX200 '83 - '94 KX250 '80 - '92 KX500 '82 - '93 KX125 '80 - '92

Replacement front fender by Maier that will fit great on your Kawasaki.

Available in 4 colors.

Ships in 3-5 business days
$99.95
Universal fit. May require additional adjustment or modification.

Universal off-road front fender. Must be drilled to fit your mounting bolt pattern.

Ships same business day
$23.95

Side Panels

KLR650 '87 - '07

Quality replacement radiator air scoops. Sold in pairs for gen 1 KLR650.

Available in 4 colors.

Ships in 3-5 business days
$124.95
KLR650 '87 - '07

New replacement side panels specifically made for gen 1 KLR650.

Available in 4 colors.

  Will not fit KLR250

Depending on your application and preferences, more than one optional heat shield may be useful.

Add Heat Shield
Ships in 1-2 business days
$95.95

Windscreen

DRZ400 '00 - '03 DRZ400E '00 - '07 DRZ400S '00 - '24 DRZ400SM '05 - '24

Transform your ride. Now there is wind protection for on and off-road use with no compromises! MadStad's new rotating dual-sport windshield brackets put the windshield where you need it for street riding, but tuck it down out of the way for off-road. Adjust the height and angle for much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide, and it's not in your face when you want to hit the trails.

Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.

What's included in the kit:

  • A set of MadStad dual-sport adjustable brackets
  • 3/16" (4.5 mm) thick cast acrylic windshield

The MadStad brackets bolt to your fork clamps putting the windshield just in front of your instrument cluster for street riding, with adjustability for height and angle. The rotation feature allows you to shift the shield forward and down through 7 different settings bringing it down in front of the head light and out of your way. Their custom knobs lock the brackets in their multiple positions so the shield stays where you want it to, even bouncing around off-road.

Ships in 1-2 weeks
$289.95

Rear Fender

XR650L '93 - '26 XR600 '85 - '00 XR250R '86 - '95 XR250L '91 - '96

Quality MX style rear fender from Maier.

Please contact us for availability information
$91.95

Fuel and Intake

Air Filter

TW200 '87 - '26

Are you a fan of K&N air filters? Here's one built just for the TW200. Top of line filtering to keep that engine healthy for years to come.

  • Increased air flow over the stock air filter
  • Designed to increase horsepower and throttle response
  • Designed to fit inside the factory air box
  • Larger surface area over foam filters which offers longer service intervals in dusty conditions
  • Four layers of premium cotton gauze provides outstanding filtration
  • Washable & re-usable, never wears out
  • One filter will last the lifetime of your bike
Add Air Filter Care Kit
Add Air-Box Seal
Ships same business day
$70.95
XR650L '93 - '26

These Twin Air Dual-Stage air filters deliver unbeatable performance and protection which is why they are the hands-down choice of more world and national champions than all other filters combined. Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles without restricting airflow. 

This filter kit includes a new air filter cage.

Ships in 1-2 business days
$54.95
DR350 '90 - '99 DR350S '90 - '93 DR350SE '94 - '99

Twin Air Filter's patented design, high quality materials and superior construction deliver unbeatable performance and protection - and make Twin Air Filters the hands-down choice of more World and National Champions than all other filters combined.
An air filter is your engine's only protection against the elements, and your stock filter isn't up to the task. Replace it with a Twin Air- the number 1 filter system proven on motocross tracks around the world.
Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles-without restricting airflow

Ships same business day
$38.95

Jet Kit

DR650 '96 - '26

The jet kit for riders who want their bike to run well but do not want to modify the air box.

The Ti ProKit w/Titanium needle adds more power and better throttle response. Easy to install and tune - no slide drilling. No air box modification.

Includes: a main jet selection, adjustable titanium needle, clips (with extras), pilot jet, instructions.

Add Pocket Tuner Tool
Ships same business day
$69.95
DR200 '96 - '26
  • Dynojet jet kits provide a simple and affordable solution to carburetor tuning problems
  • Kits increase power and smoothness throughout the rev range while maintaining optimum fuel economy
Add Pocket Tuner Tool
Ships in 1-2 business days
$93.95
XR650L '93 - '26

Designed for use with stock engines using either stock or aftermarket exhaust and air filters.

  • Provides a simple and affordable solution to carburetor tuning problems.
  • Allows you to tune your bike for increased power and smoothness while retaining fuel economy.
  • Includes a guide booklet on how to install and use your jet kit to its full potential.
Add Pocket Tuner Tool
Ships in 1-2 business days
$103.95

Carburetor Repair Kit

DR650 '90 - '26

This is an O.E. replacement diaphragm for your BST40 carburetor.

Ships in 1-2 business days
$31.95
DR250S '90 - '92 DR250SE '93 - '95 DR350S '90 - '93 DR350SE '94 - '99

Each kit contains float bowl gasket (or o-ring), float valve assembly (or float needle) and o-rings to rebuild one OEM carburetor body.

Ships in 1-2 business days
$38.95

Controls, Brakes, $25 and Under

Levers

CRF250L '17 - '20 CRF300L '21 - '26 CRF300L Rally '21 - '26 XR650R '00 - '07 XR400R '96 - '04 XR250R '96 - '04

The high rigid and light weight design, provides better control of the rear brake. 

The clevis body is made of A7009-T6 aluminum. Comes with a specially designed stainless steel pin.

Ships in 3-5 business days
$18.95

Controls

Levers

Genuine Suzuki replacement brake and clutch levers. Standard length. 

Available as a set or individual.

Please notice that this set is for '10-current DR650.

Choose Year
Ships same business day
$51.95
KLR650 '87 - '07

A set of replacement brake and clutch levers. Standard length.

Please be sure and order the correct levers for your model year KLR.

Note: Gen 1 levers are black
Gen 2 levers are Silver

Choose Model
Ships in 1-2 business days
$22.95
CRF250L '13 - '20 CRF250L Rally '17 - '20 CRF300L '21 - '26 CRF300L Rally '21 - '26

Forged aluminum, black anodized arm and Knurled CNC aluminum shift tip.

Ships in 1-2 weeks
$28.95

Bar Risers

Universal fit. May require additional adjustment or modification.
  • Adapt 7/8" bar mounts to accept oversized 1-1/8" handlebars
  • An economical alternative to replacing expensive top triple clamps
  • Include mounting bolts.
  • Raises handlebar 20mm.
  • Polished aluminum
Ships same business day
$49.95

Grips

KLR650 '08 - '26 TW200 '01 - '26 XT250 '08 - '26 XT225 '01 - '17 WR250R '08 - '20 WR250X '08 - '11
  • Machined and knurled 6061 billet aluminum. Actual color may vary
  • Removable end cap for easy hand guard installation
  • Works with standard housing
Ships same business day
$44.95

Brakes

Pads

T7 Ténéré 700 '20 - '26 Himalayan 411 '18 - '26 Tuareg 660 '22 - '26

Replace those worn out brake pads with quality EBC replacements.

  • The perfect brake pads for leisure use
  • Offer maximum durability and excellent braking performance
  • Constructed of U.S.-made sintered bronze for longest lifetime
  • Best for riding in water, mud, dust, or sand
Ships in 3-5 business days
$39.95
V-Strom (DL650) '04 - '26 V-Strom (DL1000) '02 - '12 SV650 '99 - '26

Organic brake pads contain man-made high-performance fibers that are used for their light weight, high strength abrasion resistance and thermal stability. These Aramid fibers have a high strength-to-weight, thermal stability and abrasion resistance to provide advantages over steel fiber-based products. They provide excellent stopping power without noise and rotor galling but still provide fingertip control and strong, predictable brake response.

Double-H sintered metal brake pads feature the HH friction rating, the highest in the industry. These pads provide maximum brake effect and last twice as long as organic pads.

Semi-sintered pads have an all new recipe containing 30% copper by weight with an organic matrix. This design combines the long life of a sintered pad with the great feel and lack of rotor damage common with full-sintered pads. These can be used to replace Kevlar or sintered metal compound pads.

Set includes pads for both front calipers.

Choose Pad Type
Ships in 3-5 business days
$85.95
XT250 '08 - '26 DR650 '96 - '26 DR350 '90 - '99 DR350S '90 - '93 DR350SE '94 - '99 KDX200 '83 - '06

EBC brake pads contain aramid fibers; these are man-made high-performance fibers used widely for their light weight, high strength, abrasion resistance and thermal stability.

Sintered Pads: 

  • The perfect brake pads for leisure use
  • Offer maximum durability and excellent braking performance
  • Constructed of U.S.-made sintered bronze for longest lifetime
  • Best for riding in water, mud, dust, or sand
Choose Type
Ships same business day
$36.95
TW200 '87 - '26 XT225 '92 - '07

Premium quality EBC Rear brake shoes.

  • EBC brake shoes are radius ground, and edge trimmed
  • Lead out chamfers at lining ends
Ships in 1-2 business days
$20.95

Caliper Rebuild Kit

DRZ400S '00 - '24 DRZ400SM '05 - '24 DR650 '96 - '26 XR650L '93 - '26

Each kit includes all necessary rubber components and brake pins.

Ships same business day
$27.95

Rotor

KLR650 '87 - '07

Made with heat-treated carbon steel for longer wear life and reduced galling. Stock size, simple bolt-on procedure.

Please contact us for availability information
$113.95
XR650L '93 - '26

High quality carbon steel brake rotor.

A great option for every day use, or on your spare rear wheel.

  • manufactured from unique ebc low carbon hpsr steel
  • laser & cnc punched for lightness
  • hardened and ground for precision braking
  • nickel coated to resist corrosion
Backordered: Waiting for stock from suppliers to fulfill orders placed on or after April 2025
$133.95
XR650L '93 - '26

Made with heat-treated carbon steel for longer wear life and reduced galling. Stock size, simple bolt-on procedure.

  • manufactured from unique ebc low carbon hpsr steel
  • laser & cnc punched for lightness
  • hardened and ground for precision braking
  • nickel coated to resist corrosion
Backordered: Waiting for stock from suppliers to fulfill orders placed on or after April 2025
$133.95

Brake Line

DR350 '90 - '99 DR350S '90 - '96 DR350SE '90 - '99

GBrakes Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.

The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.

  • Significantly improves response and feel over factory rubber lines
  • Largest performance improvement for your money over any other braking upgrade
  • Stainless steel hose resists abrasion and puncture
  • Teflon core does not degrade over time like rubber lines
  • PTFE Dupont 64 Teflon® hose
  • Feature a heavy-duty stiffener sleeve and route just like the factory lines
  • Proprietary, premium fittings
  • Banjos utilizes a unique machined channel and sealing surface for leak-free installations
  • R&D and engineered in the USA
  • GBrakes USA controls the manufacturing process, ensuring the highest level of quality control
Choose Type
Add Brake Fluid
Backordered: Waiting for stock from suppliers to fulfill orders placed on or after July 2025
$64.95

Armor - Bike Protection

Brake Guard

XT250 '08 - '20 WR250R '08 - '18 WR250X '08 - '11

From JNS Engineering, a super solid Rear Master Cylinder Guard for the XT250, WR250R and X. CNC formed and then powdercoated black for lost lasting corrosion protection. Did we mention how good it looks? All hardware provided.

Ships same business day
$38.95
XR250R '96 - '04 XR400R '96 - '04 XR650L '93 - '26 XR600 '90 - '00 XR650R '00 - '07

PSR has a new shark fin rear rotor protector for the big XR and XRL. CNC machined from forged aluminum and then anodized gun metal in color. This unit bolts to the stock caliper bracket.

Ships same business day
$31.95

Skid Plate

These hand-crafted bash plates from B&B Eng. are constructed from 4mm 5083 aluminium plate. Strong and lightweight, this material has been selected because of its extreme suitability for welding, abrasion and impact resistance. All the necessary stainless clamps and bolts are included. Plate has a polished finish with foam or rubber where required.

Choose Finish
Ships same business day
$227.95
CRF250L '13 - '20

Their best selling product to protect your bike, Flatland Racing skid plates are made from 5052 3/16" aluminum plate.

They are all hand tig welded together with side engine guards. Installation is easy with our clamps that grip tight.

Their skid plates offer clean out slots and oil plug hole, making oil changes simple. These are more durable than carbon fiber and plastic.

Mounting hardware and instructions included.

(Note: This will not fit the Rally)

Choose Model
Ships in 3-5 business days
$119.95

Engine Guard

Africa Twin (CRF1000L) '16 - '19

Givi makes a great set of Crash Bars available for the Africa Twin. If your intentions include off-road riding of any kind, you really should not go without protection. Not only for you, but for your bike too. Even a slow-speed tip-over can cause damage that would make riding away impossible.

Your first choice is whether you would prefer black powder coated steel or Stainless Steel. Both are built from 25 mm diameter material welded to steel mounting plates. Select the lower set based on your color of choice and whether or not you have a standard transmission or a DCT transmission. You must select the correct model in order to ensure correct fitment. These provide protection for the engine and surrounding components. These units do NOT require the upper guards and work great on their own.

Included with each piece you receive a complete set of instructions and all mounting hardware required, in typical Givi fashion.

Please Note that these Crash Bars are also compatible with the Givi Skid Plate.

Not compatible with CRF1000L Africa Twin DCT / 25 mm diameter steel tube.

Works with standard transmission model only.

Choose Model/ Type
Ships same business day
$196.95

Handguard

Universal fit. May require additional adjustment or modification.

These handguards come with mounts that will work on both standard and and oversize bars. The aluminum wrap-around bar is the biggest on the market with two large plastic shields that are also some of the largest available. The X-Factor hand guards offer great protection from the elements, especially during those colder months when you're trying to stretch out your riding season.

Works with 7/8" or 1-1/8" bars.

X-Factor guards may require you to cut your lever ends down, or use short levers.

Ships same business day
$139.95

Electrical

Battery

CRF250L '13 - '16 CRF250L Rally '17 - '20 CRF300L '21 - '26 CRF300L Rally '21 - '26 DR200 '96 - '26 KLX250S '06 - '14 TTR125 (E) '03 - '09 TW200 '87 - '26 XT225 '92 - '07 XT250 '08 - '26 TTR125LE '03 - '26

The Shorai LFM Standard Recommendation is the best overall pick for most applications, and has been selected to give strong cranking performance and long lifespan.

  • Capable of holding a charge for up to one year without maintenance
  • Two to four times the life of lead-acid batteries
  • A Battery Management System that protects the battery from over-discharge.
  • Carbon Fiber Composite case
  • Stronger cranking for better starts
  • Environmentally friendly, just discharge and dispose
  • Ultra light and compact

Measures 4.5" x 3.5" x 2.28"
Weight (lbs): 1.34 lbs
Weight (kg): 0.61 kg
Cold Cranking Amps: 135
Polarity: [- +]

Each Shorai battery includes self-adhesive foam panels to achieve a snug fit in your battery box.

Ships same business day
$125.95

Drivetrain

Sprocket

V-Strom (DL650) '04 - '19 V-Strom (DL1000) '02 - '26

Quality steel rear sprockets. Choose 41T through 47T. The stock size for the 650 is 47T.

The stock size for the 02-05 1000 is 42T and 06-up is 41T. Go up in tooth count for faster acceleration. Go down for lower rpm at cruising speed.

Color may vary based on manufacturer availability, quality will not be compromised.

Ships in 3-5 business days
$49.95
CRF250L '13 - '20 CRF250L Rally '17 - '20 CRF300L '21 - '26 CRF300L Rally '21 - '26

JT Sprockets is the world's leading manufacturer of aftermarket sprockets, constantly raising the industry's standards for quality and service. JT Sprockets are the only sprocket manufacturer using the ultra-durable high carbon C49 steel for rear sprockets.

Choose Sprocket Size
Ships in 3-5 business days
$21.95
TW200 '87 - '26

High quality sprockets

  • Stock size is 14 tooth
  • Add teeth for highway riding
  • Subtract teeth for low end gearing

Counter shaft sprocket replacement requires the removal of the left side case cover. A new gasket may be required. This is also a great time to replace that leaking oil seal!

Select Tooth Count
Add Gasket
Add Countershaft Oil Seal Kit, Yamaha
Ships same business day
$21.95

Quality steel sprockets and EK SRO6 O-ring chain. We put them together to make a complete, affordable kit. Chain comes with clip type master link.

Choose Gearing
Add Chain Paste
Add Chain Lube
Ships same business day
$119.95
KLR650 '90 - '26

Individual 14T, 15T or 16T front sprockets.

JT Sprockets are made from the latest generation of computer design and control metal cutting equipment for maximum durability. Front sprockets are made from chromoly SCM420 steel alloy. All sprockets are heat-treated and hand-finished to meet or exceed the highest possible quality standards.

Choose Sprocket Size
Ships same business day
$21.95

Now you can have minimum output shaft wear, minimum chain drive wear with the FRITZCO DRIVELINE sprocket. The design of their sprockets provide correct chain alignment, allows for full spline contact with the XR650L's output shaft, fit the counter shaft either way, and straight up no hassle installation with the OEM two bolt retainer and fasteners (except 13 tooth that comes with it's own quick change retainer). Their sprockets are machined from alloy steel that is comparable in every way to OEM Honda and the best offered by other manufactures. The sprockets are then given a heat treatment that provides a compatible sprocket for the Honda output shaft and longest wear life possible.

A way to double the sprockets life would be to have a sprocket that fits on the shaft either way so both sides of the teeth can be used. Bear in mind you can't wear one side of the teeth all the way through, then flip the sprocket, and expect double life. You must reverse when a normal wear pattern develops.

16 tooth sprocket is the biggest front sprocket that will run with the standard 110 link chain and 45 tooth rear sprocket on an XR650L
The OEM cover will require modifying to use the 16 tooth sprocket on your XR650L.

Choose Sprocket Size
Ships same business day
$38.95

Chain Guide

XR650L '93 - '26

Chain sliders undergo performance degradation over time due to the friction experienced by the chain. To maintain optimal functionality, it is recommended to replace worn components with genuine Honda parts.

Ships in 3-5 business days
$66.95

Chain

TTR125 (E) '00 - '09 TTR125L '00 - '08 TTR125LE '03 - '26

428 x 130 links. High Quality non-ORing chain. Rust-resistant gold plated chain for high powered racing machines.

Add Chain Lube
Ships same business day
$39.95

Exhaust

Heat Shield

Universal fit. May require additional adjustment or modification.

If your aftermarket exhaust is missing heat shield mounting points, this is the easy fix you’ve been waiting for. 

Includes one stainless steel mounting bracket with M6 threaded nut, and one stainless steel hose clamp.

Fits exhaust approximately 1.1inch-2inch diameter. Trimming may be required for smaller diameter exhausts.

Ships same business day
$14.95

Muffler

The Powercore 4 spark arrestor muffler. FMF developed the Powercore 4 to increase the horsepower and torque throughout the entire power curve. Highest quality packing for long life. Removable spark arrestor included. Louder than the Q4. Approximately 99db stock or about 94db with optional Quiet Insert installed.

  • Uses long-life muffler packing for increased packing life
  • Forest Service approved spark arrester
Ships same business day
$359.95

The Powercore 4 spark arrestor muffler. FMF developed the Powercore 4 to increase the horsepower and torque throughout the entire power curve. Highest quality packing for long life. Removable spark arrestor included. Louder than the Q4. Approximately 99db stock or about 94db with optional Quiet Insert installed.

  • Uses long-life muffler packing for increased packing life
  • Forest Service approved spark arrester

Delayed stock from manufacturer, please ask for availability.

Choose Year
Ships in 3-5 business days
$399.95

X3 EVO represents the off-road evolution: LeoVince has combined all its experience in the off-road world with cutting-edge materials and Italian design, enhancing freedom in its purest form.

The X3 EVO body is made of AISI 304 stainless steel with TIG welds handcrafted by specialized operators, to guarantee long-lasting performance. X3 EVO will allow you to face the most extreme environments and conditions because it does not fear water or mud, nor wear over time.

The LV logo is their tribute to a motorcycle culture that we have loved for 70 years and is laser etched on the body of the exhaust: it is as endless as their passion.

They manufacture the end cap in 100% real carbon, with their special 2x2 twill carbon fiber, specifically designed to resist high temperatures and make the X3 EVO even lighter.

The matte clear coating, in addition to enhancing the carbon texture, protects the end cap from wear and UV rays, keeping the X3 EVO always in a perfect shape.

The sound of X3 EVO is already unmistakable at low revs. X3 EVO has a direct interior, specially conceived to channel the exhaust gas in an optimal way, to unleash a deep sound, giving a new voice to your bike.

The X3 EVO's Spark arrester has been tested and approved by the United States Forest Service and is essential for off-road riding in compliance with regulations, with more peace of mind, more respect for the environment and more fun.

 

Add Anti-Seize
Add Muffler Gasket
Ships in 1-2 business days
$439.95

 The Powercore 4 spark arrestor muffler. FMF developed the Powercore 4 to increase the horsepower and torque throughout the entire power curve. Highest quality packing for long life. Removable spark arrestor included. Louder than the Q4. Approximately 99db stock or about 94db with optional Quiet Insert installed.

  • Uses long-life muffler packing for increased packing life
  • Forest Service approved spark arrester
Ships same business day
$399.95

Full System

Another great combination package - the FMF Powerbomb header and Powercore 4 Muffler.

The Powerbomb header promotes better flow by allowing a small expansion of the exhaust gasses improving scavenging. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels.

The PowerCore4 muffler was developed to increase the horsepower and torque throughout the entire power curve and give you a noticeable power increase that is very usable and beneficial, no matter what your riding style or ability is.

Some of the features of the PowerCore 4 include: space age internal packing for maximum packing life; hi-flo modular end cap; internal shape of core uses hi-flo technology; enhanced sonic evacuation provides for higher flow and increased power and removable spark arrestor.

Choose Year
Add Anti-Seize
Ships in 3-5 business days
$617.95

Headpipe

KLR650 '84 - '07

The FMF Powerbomb is a four stroke header pipe unit that has a unique bulge precisely located in the header system. A "pre-muffler" of sorts, the Power Bomb actually lowers sound output because it creates more surface area to absorb the sound medium (exhaust). The surface area of the perforated core lets the sound exit into the absorbing material (steel wool packing) and then allows the air to expand, cool and ramp back up with the higher pressure air. The result? The FMF Powerbomb is instrumental in reducing the decibel level on any four stroke and because of the expansion and contraction on exhaust through the system, the flow has been increased by nearly 10%. That means more power throughout the range.

Features:

  • Tuned for bottom to mid performance
  • Powerbomb headers are the front runner in performance headers
  • Designed for full service access to oil filter
Choose Year
Ships in 3-5 business days
$249.95

Gas Tanks

DR650 '96 - '26

Get better range from your DR650 by adding an IMS 4.9 gallon fuel tank. Available in Natural, White, Black and Blue. Natural color is recommended if you wish to easily see the fuel level in the tank. Includes cap and fuel petcock.

Ships same business day
$347.95
CRF250L '13 - '16

Acerbis fuel tanks were designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service.

* Will not fit 2017 Model

Choose Color
Please contact us for availability information
$285.95

Accessories

Universal fit. May require additional adjustment or modification.

If you're like us, you hate the long floppy vent hose hanging off the cap of your aftermarket tank.

This one-way vent cap replaces the long hose with a short one only about 2" long. It allows air into your tank but prevents fuel from sloshing out.

Machined from billet alloy and anodized for good looks.

  Not for stock fuel tanks!

Ships same business day
$11.95
DR350SE '94 - '99 DR350S '90 - '93 XR650L '93 - '26 CRF250L '13 - '26 DR650 '96 - '26

If you need a replacement cap for your Acerbis tank, why not go bling? These caps have a carbon fiber pattern molded into them that is extremely realistic. Looks like the real thing. Topping off the cap is a CNC Machined metal vent cap. This eliminates the need for a lengthy vent tube that gets in the way. The vent cap allows air to vent into the tank but does not allow fuel to splash out during normal use or during a tip over.

  These caps fit Acerbis tanks only.

Ships same business day
$24.95

Tires

Dual-Sport

VanVan 200 '17 - '26 TW200 '87 - '26

Here is another great upgrade for the TW200 or the VanVan front tire.

Universal 'old school' trials type tread pattern. A versatile performer with a tough nylon carcass and raised dimpled knobs that work well in a variety of terrain.

  • Narrow knobby configuration means less of an environmental foot print on the trail
  • 4 ply rated
  • DOT approved
  • Not intended for extended highway use

Tire size is 4.00-18 (64P load / speed rating)

Ships same business day
$106.95
Universal fit. May require additional adjustment or modification.

The 244 Series Dual Sport street and trail tires were designed to be equally at home on dirt or pavement. Great value.

  • DOT approved, tube type
  • 4-ply rating
  • All sizes designed for front or rear fitment
Ships in 3-5 business days
$64.95

Frame, Tools

Suspension

Universal fit. May require additional adjustment or modification.
  • Designed to quickly and precisely remove outer bearing race from the steering head without the use of a hammer and punch
  • Puller design ensures bearing is pulled perfectly straight to eliminate possible damage to frame
  • Works on all tapered bearing races from 47 mm to 55 mm OD
  • Precision machined anodized aluminum cup will not damage seal surface
  • Brass bearing washers for easy use and long life
  • Hardened steel jaws engage securely on inner bearing lip
  • Lifetime limited warranty
Ships in 3-5 business days
$134.95

Engine

Oil Filter

Made from laser cut, medical grade, 304 stainless steel micronic filter cloth. This filter provides 200% more filter area than most other filters. Most high quality filters will pass particles in the 90 to 95 micron range, and some tested, as much as 300 microns. Sand is about 125 microns and a white blood cell approximately 25 microns. Scott's stainless filter catches items down to 35 microns "absolute". The pleat seam is welded, not glued like paper filters, increasing temperature resistance to 600 degrees F.

Ships same business day
$83.95
KLR650 '87 - '26

This is all you need to not only change your oil, but protect your motor as well. We include a magnetic drain plug, to help catch stray metal pieces, a 5-pack of oil filters, and new O-Rings to replace any you have that may be leaking or worn.

  • Magnetic Drain Plug
  • O-Ring Kit
  • 5-Pack of Oil Filters
Add Funnels - Disposable
Please contact us for availability information
$38.95
XT250 '08 - '26

This is all you need to not only change your oil, but protect your motor as well. We include a magnetic drain plug, to help catch stray metal pieces, a 5-pack of oil filters, and new O-Rings to replace any you have that may be leaking or worn.

  • Magnetic Drain Plug
  • O-Ring Kit
  • 5-Pack of Oil Filters
Add Funnels - Disposable
Please contact us for availability information
$52.95
XR650L '93 - '26

This is all you need to not only change your oil, but protect your motor as well. We include a magnetic drain plug, to help catch stray metal pieces, a 5-pack of oil filters, and new O-Rings to replace any you have that may be leaking or worn.

  • Magnetic Drain Plug
  • O-Ring Kit
  • 5-Pack of Oil Filters
Add Funnels - Disposable
Please contact us for availability information
$38.95

Gasket

TW200 '87 - '26

Got a little oil seepage or changing out your clutch pack? Here is the gasket you need for the right hand side case cover of your TW200. This is the same side of the engine as your kickstart lever and/or rear brake lever.

Ships in 1-2 business days
$34.95

Clutch

DR650 '96 - '26

Barnett high performance clutch set. Includes 8 Kevlar friction plates, the 7 'loose' steel drive plates, stronger springs and a high quality clutch cover gasket.

Ships in 1-2 business days
$209.95

Spark Plug

DRZ400 '00 - '03 DRZ400S '00 - '24 DRZ400SM '05 - '24 DRZ400E '00 - '07

Keep your motor running right with fresh spark plugs!

NGK is one of the world's largest manufacturer of spark plugs, whose products are used as original equipment (OE) on countless motorcycle and automobile models.

  • High-quality materials and superior construction for serious power and reliability
    • Pure alumina silicate ceramic insulator provides high strength and better heat transfer
    • Deep-seated copper core for a wider heat range
    • Nickel alloy tip for longer life
    • Trivalent metal plating provides superior anti-corrosion and anti-seizing properties
  • Choosing the right high-quality plugs prevents fouling from running too cool and preignition from running too hot
  • NGK plugs available for almost every application and riding style
Add Anti-Seize
Ships in 3-5 business days
$8.95

Tires, Tools

Tire Tools, Wheel & Tire

Universal fit. May require additional adjustment or modification.

In the shop or on a trip, these are the Tire Irons to have.

Sold Each

  • Constructed of strong, heat-treated vanadium steel
  • Spoon design decreases the chance of tube pinch
  • 10" long tire iron with coated rubber handle
Ships in 3-5 business days
$16.95
Universal fit. May require additional adjustment or modification.
  • A tool to keep open up the bead when replacing a tube.
  • Works smoothly even with the toughest beads.
Please contact us for availability information
$14.95
Universal fit. May require additional adjustment or modification.

No more fighting to keep the bead down while installing or repairing your off-road tires. The Bead Buddy holds the tire bead down in the drop center of the rim during tire changes making changes as easy as possible. Machined from tough 6000 series aluminum the Bead Buddy is light weight and compact enough for any tool pack. The Delrin securing thumb screw insures no scratches to your rims.

The Bead Buddy is NOT recommended for use with Bib Mousse tubes.

Ships in 1-2 business days
$12.95
Universal fit. May require additional adjustment or modification.
  • Innovative multi-use tire tool set
  • Breaks the bead on most street and off road motorcycle tires
  • Integrated tire spoon for tire removal and installation
  • Light weight and compact size is perfect for tool packs
  • Ergonomic handles with crossguard to keep hand from riding forward
  • Forged 7075-T6 aluminum construction for strength and durability
  • Black anodized finish
  • Patent pending

Available in 9.5" aluminum (ideal for travel) and 16" forged steel (useful in a home shop/garage)

Select Product
Ships same business day
$82.95

Featured Products, Frame

Footpegs

KLR650 '87 - '26 DR650 '96 - '26 DR350 '90 - '99 DR350S '90 - '96 DR350SE '94 - '99 TW200 '91 - '12 KLX110 '11 - '16

Motion Factory Racing patented Flex-Mount Footpeg System provides superior grip and allows your foot to flex forward and back with the movement or your motorcycle.

One of the key features of Flex-Mount Footpegs is their unique flex-mount design. This design allows the footpegs to absorb shocks and vibrations, reducing fatigue and improving overall comfort during long rides. Additionally, the adjustable height and angle options ensure a personalized fit, allowing you to find the perfect riding position for maximum control and stability.

The bushings act like the suspension on your bike. With bushings, there are a couple of things to think about. The more firm the bushing the more durable and longer it will last. They use a durometer, a hardness scale 0 being the softest and 100 being the hardest. They don't go below a80 because they found that durability isn't great below this but have tested as low as a60 bushings. A bigger person that rides enduro-style terrain might want an a96 or a98 rated bushing. A lighter person might want the opposite but in the end, it comes down to personal preference. 

They put an a90 bushing on all new mount setups so people can get a good feel for their mid range option. The bushings are high quality yet inexpensive (they achieve this because they use skateboard bushings that are already developed and produced in massive quantities around the world) and a wear item designed to be replaced each season or depending on how hard or often someone rides.  

Complete mount system includes: 

  • 6061 Aluminum ADV Platforms (65mm wide x 107mm length) 
  • Stainless steel mounts
  • Sleeve bearing (8x10x20mm) included for 8mm OD' footpeg pins. 
  • Right and Left spring included. 
  • Chromoly steel spindles with reusable thread locker. 14mm wrench. Torque spec 40 ft/lbs 
  • A90 (medium flex) rated bushings
  • Cleats and stainless steel machine screws. M3x18mm. These can simply be replaced by going to your local hardware store when damaged or worn out. 
  • Bushing bolts. 8mm Allen wrench. Torque spec 30 ft/lbs

 They designed their hardware to bend rather than break in a significant impact. A wrench or adjustable wrench will quickly and easily bend the bolt back straight. Please avoid using a hammer. A little leverage from a long-handled wrench or pipe will do the job. The whole system is rebuild-able and serviceable.

They Fit Kawasaki KLX110 and Yamaha TW200 however some of these bikes may need a little modification by yourself, Please check the size carefully before you buy. If you make mods to the footpegs for fitments it will void all warranties and return policies. 

Ships in 1-2 business days
$229.95

Controls, $25 and Under

Grips

Universal fit. May require additional adjustment or modification.

ProTaper Pillow Top Grip with 3-D (Tri-Density) Technology.  Try the grip with the technical advantage of three dedicated rubber compounds.

  • Vibrasonix pillow top reduces vibration and cushions impact. 
  • Inner core compound perfects the bonding interface with bars. 
  • Anti-Rip Tip™ uses denser compound to increase life of grip. 
  • Designed to self-clean and shed mud away from outer surface. 
  • Tacky gel-like surface compound is perfect for the trail and MX.
Add Grip Glue
Ships same business day
$13.95
Universal fit. May require additional adjustment or modification.

Protect your thumbs from blisters caused by riding on the inside of your grips.

Sold in Pairs.

Ships same business day
$4.95

Frame

Subframe

A very popular modification. Eliminates the weaker 2 bolt setup in favor of one bolt all the way through for the upper subframe attach point. No more worry about keeping the bolts tight, or the original bolts breaking. If you have the SW Motech or Tusk crash guards you want this kit for sure.

This universal will give you both upper bolts, the upper spacer for the standard kit, and both lengths of lower bolts in case you have bars that use that point to attach.

Ships in 1-2 business days
$35.95

Controls, Electrical

Levers

Here is the little switch that mounts inside your brake or clutch lever perch and controls the brake light or clutch safety circuit. This switch often gets damaged in an unplanned dismount (aka: crash) or the plastic simply cracks from age. When this happens, you can find yourself chasing a short circuit that keeps blowing your fuse every time the brakes are applied. If this has happened to your TW, here's the fix!

Choose Switch and Year
Ships in 1-2 business days
$31.95

Luggage

Luggage Racks

WR250R '08 - '18 WR250X '08 - '11

Wide Adventure rack for the WR. Precision laser cut from .25" 5052 aluminum then powder coated black with a shot peened look. This rack is 11" x 17.5" and has numerous tie points for straps or bungees to secure a load. It is pre-drilled for a RotopaX mount. Easy installation means it is bolted to the bike in 10 minutes. There is some minor drilling of the plastic to be done. All necessary hardware and complete instructions included.

Ships in 1-2 business days
$128.95
DRZ400S '00 - '24 DRZ400SM '00 - '24

DRZ400 rack is available in both a Utility and Sport version. The Sport version is 9" x 9" and the Utility is a full 2" longer for added storage space. Both of the S/SM racks have tabs so you can bolt the stock tool bag on.

Please select the rack for your specific model as the differences are significant

  • Fully welded construction from 16 gauge mild steel
  • Powder-coated black textured finish
  • Rigid 4 point mounting system (except off-road model rack)
  • Hardware and detailed instructions included
Choose Type
Ships in 1-2 business days
$104.95
DR200 '96 - '14
  • CNC laser cut from light weight 1/8" 5052 Aluminum
  • Easy installation, no modifications required
  • Large 12" x 9" surface area
  • Sleek low profile, and lightweight!
  • Rigid 4 point mounting system
  • RotoPax 1 gal or 1.5 gal compatible

You may purchase just the rack or you can order the Rack with the RotoPax Mount. If you really want it all, you can order the Rack, Mount and a Fuel or Water Container.

Add Container Mount
Add Rotopax Containers
Ships in 1-2 business days
$104.95

Engine, Tools

Repair Manuals

This Official 2001-up Yamaha TW200 Trailway Factory Service Manual provides repair, maintenance and service information for 2001-up Yamaha TW200 Trailway motorcycles. Most of the information is useful for the 1987-2000 models as well.

Ships in 1-2 weeks
$90.95
XR650L '93 - '26 XR650L '91 - '00

The Clymer shop service and repair manual. It has all the necessary info to do any maintenance or repairs to your XR650L.

Ships in 1-2 business days
$44.95

Armor - Bike Protection, $25 and Under

Headlight Guard

DR650 '90 - '26 DRZ400 '00 - '03 DRZ400E '00 - '07 DRZ400S '00 - '24 DR350S '90 - '99

Made of military aircraft grade 3/16" cast acrylic, this guard will protect your lens from roost, rocks and branches. Optical clarity of the acrylic ensures brightness and projection of your headlight are minimally effected while all the while protecting your headlight from impact and abrasion.

Guards are held to the headlight lens with an industrial strength hook and loop system on each corner.

Choose Model
Ships in 3-5 business days
$19.95

Suspension

Fork Seals & Bushings

XT250 '08 - '26

Genuine Yamaha fork seals and dust wipers.

Add a fresh set of inner and outer bushings for a complete fork restore.

Choose Option
Ships in 1-2 business days
$53.95

Forks

XT225 '92 - '07

These springs are custom wound specifically for the XT225. Stiffer than the .36 kg/mm stock springs, these will make your front perform significantly better. Combine them with the Cogent DDC's and you will be very happy with the results. Sold as pairs.

Choose Spring Rate
Ships same business day
$155.95

Included in this kit are .42 kg/mm fork springs, Cogent DDC (Drop in Damper Cartridge) performance cartridges and two bottles of 5w fork oil.

Ships same business day
$374.95

Lowering Link

XR650L '93 - '26

Aluminum alloy lowering link. Lowers the rear suspension approximately 1 inch.

Bearings included.

Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.

Ships in 1-2 business days
$139.95

Shock

DRZ400 '00 - '03 DRZ400E '00 - '07 DRZ400S '00 - '24 DRZ400SM '05 - '24

Heavy duty shock bumper. The stock bumper is prone to disintegrating with age. If you are re-valving your shock it's a good idea to be sure the bumper is in good shape.

Ships same business day
$29.95

Fork Boots

CRF250L '13 - '16 XR250R '96 - '04 XR400R '96 - '04 XR650L '93 - '26 KLX250S '06 - '14 KLR650 '87 - '18 DR350 '90 - '93 DR650 '96 - '26 DRZ400 '00 - '03 DRZ400S '00 - '24 DRZ400E '00 - '07 DR350SE '94 - '99 DR350 '90 - '99

An excellent replacement for the stock fork boots. These are great for protection from dirt, rocks and other contaminants. These boots utilize the latest advances in material technology to adapt to fork and styling demands. These high quality fork boots are 1/4 the price of the OEM factory replacements.

Top DiameterBottom DiameterLength
42 mm45 mm60mm

 

Ships same business day
$24.95

Engine, $25 and Under

Drain Plug

Africa Twin (CRF1000L) '16 - '19 CRF250L '13 - '20 XR250R '96 - '04 XR400R '96 - '04 XR650L '93 - '26 KLR650 '87 - '26 DRZ400 '00 - '26 DR350 '90 - '99 WR250R '08 - '20 WR250X '08 - '11 XT250 '08 - '26 Ruckus (NPS50) '03 - '09 Ruckus (NPS50) '11 - '16 CRF250L Rally '17 - '20 CRF300L '21 - '26 CRF300L Rally '21 - '26

Extra protection for your motor! Strong magnet at the end of the plug picks up metallic flakes in your oil, protecting your engine!

Please contact us for availability information
$16.95

Featured Products, Fuel and Intake

Air Filter

990 Adventure '07 - '13 950 Adventure '03 - '06

This is the more economical alternative to eliminating the 990 Adventure airbox. Better breathing equals more power. The ITG filter kit makes air filter service a snap. It also simplifies other engine and intake maintenance chores. Our kit features a steel base plate which will not deform like plastic and does not conduct heat as much as aluminum. The white powder coating also helps reflect engine heat. To take advantage of the increased airflow, we recommend upgrading your fuel injection map with TuneEcu or a Power Commander.

  • OPTION - Twin Air Breather Filter (replaces standard breather filter)
Select Breather Filter
No Toil Care Kit
Ships in 1-2 weeks
$179.95

Controls, Frame

Handlebar, Footpegs, Bar Risers

This kit is for those of you looking for a bit more arm room and a better platform for your feet in the TW cockpit. Included are ProCycle Wide Foot Pegs and our oversize bars with 30mm risers.

  • ProCycle Wide Pegs are wider MX style pegs that are much more comfortable when standing.
  • These are not only taller bars, but 1-1/8" at the clamp area for additional strength. They taper down to 7/8" on the ends so all the stock controls fit. Black in color.
  • 30mm Moose risers that raise the handlebar 30mm.

Kit does not include new throttle tube. If you have 2001 or newer TW200 and would like a new billet aluminum throttle tube, please select the addon box to receive one with your order.

Add Grip Glue
Add Throttle Tube - Billet Aluminum
Ships in 1-2 business days
$294.95

Hazardous, Tires

Tire Tools

Universal fit. May require additional adjustment or modification.

Don't leave yourself stranded! The Moose Tire Inflator Kit gets you back on the road or trail quickly.

This kit has 3 cartridges, 4" inflator hose, and a zippered pouch that fits neatly into a tool bag or fender bag.

Uses threaded cartridges only, each cartridge produces 8-9 psi.

  CO² cartridges cannot be transported on an aircraft

Ships in 3-5 business days
$24.95

Seats

Complete Seat

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

The Complete Seats come assembled with an aftermarket pan and ready to ride.

"Will not fit the Rally model"

Width:10 3/4" (273mm)
Height:Same as OEM
Custom-made to Order: Please allow 3-4 weeks for delivery.
$329.95

State-of-the-art replacement seats, Sargent seats are built on a percision-molded lightweight Polytec seat pan. Sargent's proprietary seat foam (Super Cell Atomic Foam) is their own unique blend of resilience, firmness, and vibration-absorption qualities, making it well suited for long distance comfort and support. Sargent seats are covered in a marine-grade, UV-stablized mildew resistant CarbonFX vinyl. Available in standard height and 1" lower than stock. These seats will fit bikes with the stock, IMS, or any other aftermarket fuel tank.

Width:11" (279mm)
Height:Same as OEM
Choose Seat Height
Ships same business day
$529.95