Same-day shipping cutoff: Noon Pacific Time

Search Products

Universal fit. May require additional adjustment or modification.

Sold in pairs, the 2020 Rocky Mountain Expedition Motorcycle Saddle Bags WP (Welded Product) are a combination of the previous Rocky Mountain and Expedition Saddlebags.

  • This great set of motorcycle luggage is 100% waterproof!
  • Waterproof RF-welded seam construction.
  • Construction and materials resist water, mud and dust.
  • Quickly mounts to a huge number of racks thanks to the G-Hook Mounting.
  • Compatible with their other waterproof motorcycle luggage too.
  • Carry up to 64 liters of gear in these bags.

The Rocky Mountain Expedition motorcycle saddlebags are completely constructed from Radio Frequency Welded seams out of Custom 840d TPU with a black exterior, bright yellow interior. A full 30+ liters each, a secure and simple G-Hook mounting and compression system keep these motorcycle saddlebags in place on virtually any side rack. Internal stiffeners, held in sleeves, secure the load making them almost rigid and firm, not floppy. Flexi-Side Panels allow both smaller and larger loads to be compressed securely. They've added a grab handle on each motorcycle saddlebag. D-rings on the top and front of each bag allow easy attachment of a Small or Medium Rolie Bag as a top bag for even more capacity or just for convenience. Or add a Bottle Holster for fuel or water.

Dimensions:

  • Length: 15" / 38cm
  • Width: 8" / 20cm
  • Height: 15"-17" / 38cm-43cm depending on amount of roll
Ships same business day
$429.95
XT225 '92 - '07 TW200 '87 - '25

Heavy-Duty clutch springs

  • 15% stiffer than original
  • Minimize clutch slip
  • Reduce plate wear
  • Improve power to ground
Ships in 3-5 business days
$10.95
KLR650 '87 - '18

Quality rear steel sprockets.

Ships in 3-5 business days
$49.95

ProCycle side panel guards to keep your saddlebags from fouling the side covers, gives an anchor point for soft saddle bags, and helps keep bags from being damaged by the exhaust.

Constructed from mild steel tubing that is powder coated black for nice long lasting good looks.

Our rack includes a custom sub-frame bracket that adds additional strength to allow for heavier luggage bags or cargo without long support arms or fear of damage to your TW sub-frame.

Comes with all necessary hardware:

(2) M6x16 hex flange bolts
Sub-frame bracket
(2) M8x30 hex flange bolts
(2) M8 nyloc nuts
(2) M8 washers

Side Cover Guards Only. Complete luggage system available HERE.

Ships same business day
$209.95
Universal fit. May require additional adjustment or modification.

The glove box for your motorcycle! The Zigzag handlebar bag is their smallest bag yet also one of their most popular. Sometimes you only need the basics like your wallet, phone, registration, and other small items, and no matter what you’re riding, the Zigzag handlebar bag delivers quick and easy access to the basics.

  • VOLUME: 1.5 liters (92 cubic inches)
  • DIMENSIONS: 10.5” L x 2.5” W x 4” H (27 cm L x 6 cm W x 10 cm H).
  • MATERIALS: Rugged Bomb Shell™ vinyl coated fabric, and Mil-spec materials and hardware.
Backordered: Waiting for stock from suppliers to fulfill orders placed on or after June 2024
$48.95
Universal fit. May require additional adjustment or modification.
  • 4.75" wide,
  • Raises handlebars 2 inches and allows fore/aft position adjustment
  • Provides dual pivot points for optimal bar positioning
  • One piece design is made from solid aluminum for superior strength
  • Available for 7/8" - 7/8" or 7/8" - 1 1/8" bars

Requires 7/8" factory bar clamps on bike

Choose Bar Size
Ships same business day
$99.95
TW200 '87 - '25

These grommets are new Yamaha equipment and are used to help connect your side panels to the fuel tank on any year TW200.

If you are purchasing an IMS fuel tank you may need to purchase a set of these grommets as you will have to reuse your old grommets from the stock fuel tank.

Ships same business day
$13.95
TW200 '87 - '25

Leaking Base Gasket? Replacing your worn Rings? Here are the gaskets you need to put your TW200 top end back together after a tear down. Includes: Head Gasket, Base Gasket, Stud Gasket, Head Side Cover O-Ring, two Valve Cover O-Rings, Base O-Ring, Stud O-Ring, Rocker Shaft O-Ring, two Cam Chain Tensioner O-Rings, Intake Manifold O-Ring, two Valve Stem Seals, and Exhaust Gasket.

Ships in 3-5 business days
$72.95
DRZ400 '00 - '03 DRZ400S '01 - '25 DRZ400SM '05 - '25 DRZ400E '00 - '07
  • Direct bolt-on, ready-to-install cylinder; requires no replating and looks virtually identical to the OEM
  • Nickel Silicon Carbide plated for long life
  • Honed to exact size for easy piston installation
  • Big bore cylinders do not require any machine work
  • Come complete with gaskets, cylinder, 94mm piston, rings, pin and clips
Ships in 3-5 business days
$700.95
CRF250L '12 - '20 CR125 '02 - '07 CR250 '02 - '07 CRF150R '07 - '25 CRF250R '04 - '25 CRF450R '02 - '25 CRF250X '04 - '17 CRF450X '05 - '19 CRF250L Rally '17 - '20 Africa Twin (CRF1000L) '18 - '19 CRF250R '19 - '19 CRF450R '17 - '25 CRF300L '21 - '25 CRF300L Rally '21 - '25

Replace those narrow heavy OEM foot pegs with the ZETA Racing aluminum foot pegs. When you are on your dirt bike a stable platform when riding is important. The aluminum foot pegs offer a wider platform and the spikes offer more traction for your foot preventing you from slipping. Over all it offers more control on your bike. Made from CNC machined A2014 forged aluminum and stainless pins.

Choose Color
Ships in 3-5 business days
$108.95
DR650 '96 - '25 KLR650 '92 - '18

For a top notch rebuild or re-valve of your rear shock use this high quality replacement seal head.

  • Complete assembly, ready to install into the shock body
  • Has air bleed holes to help remove air from the oil reservoir during installation
  • Double-lip oil seal design keeps out dirt and keeps friction low
  • Kits include aluminum body, dust seal, bushing, oil seal, O-ring, internal guide bushing/washer, snap ring, and top-out bumper
Ships in 3-5 business days
$43.95

The T-6 exhaust system contains a stainless steel head pipe, brushed aluminum canister and a carbon fiber end-cap for added durability and a professional look. This exhaust system features the same benefits as the T-6 Stainless Steel Exhaust System, but is designed to fit Yamaha's TT-R125 model. In addition to all of these features, the T-6 will come with a removable United States Forest Service approved spark arrestor for trail/off-road riding.

Features Include:

  • Improves performance
  • Stainless steel construction throughout head pipe
  • Brushed aluminum canister
  • Carbon fiber end-cap
  • Strong mounting bracket for increased strength and durability
  • Asymmetrical muffler configuration for increased packing volume
  • Removable U.S.F.S. approved spark arrestor
  • Two piece system including head pipe and canister
  • TIG precision welding
Ships in 3-5 business days
$465.95
Universal fit. May require additional adjustment or modification.

A complete kit to mount your phone (or other electronic device) to your motorcycle. The universal cradle expands from 2.25" to 3.25" wide and 4.75" to 6.25" tall. The width is adjustable but fixed while the upper portion of the cradle is spring loaded to keep your device secured in the roughest conditions.

Select the mount option that works best for you. The mirror mount is shown in the photo at left and is a flat plate with an 11mm hole on one side and a RAM ball on the other. Simply remove your mirror, place the plate between your mirror and the perch and tighten it down.

The handlebar mount kit allows you to mount to either a 7/8" or 1-1/8" bar. Also includes hardware to mount to the back of a lever perch. See image at bottom middle for kit pieces.

The X-Grip with handlebar mount is best suited for larger phones up to 4.5" wide. The spring loaded X-Grip cradle expands and contracts, allowing for a perfect custom fit. Kit also includes a device tether recommended for outdoor applications.

Choose Mount Type
Add USB charging cables
Add Charge Ring Connector
USB Device Charger - for SAE Plug
Ships in 3-5 business days
$59.95
WR250R '08 - '20 WR250X '08 - '11

This an OEM replacement nut for your front sprocket.

Ships same business day
$14.95
DR650 '96 - '25

Includes new Suzuki side panels, heat shield, headlight cover, rear fender and your choice of aftermarket off-road or supermoto front fender.

Choice of off-road or supermoto (SM) front fender.

Blue kits come with white side panels.

Add Hardware
Ships same business day
$474.95
Africa Twin (CRF1000L) '16 - '17 XR650L '93 - '25

Pegs that are designed for real adventure, providing a level of comfort not seen with other pegs. 2.25" by 3.5" makes for a platform that you can stand on for long periods with no worries. All necessary parts included for a direct bolt-on application.

Available in a beautiful anodized black or clear aluminum for durability and protection from the elements.

Choose Color
Please contact us for availability information
$199.95
WR250R '08 - '18 WR250X '08 - '11

The genuine factory shop service and repair manual. This is the reference manual Yamaha dealers use in their service departments. It has all the necessary info to do any maintenance or repairs to your WR250R or X.

Ships same business day
$89.95
Universal fit. May require additional adjustment or modification.

These brake fluids are motorcycle approved DOT 4 brake fluid, and is specially formulated to exceed all DOT 3 & DOT 4 specifications. What this means to you is exceptional resistance to vapor lock and maintaining consistent lever feel during extreme brake use.

  • Formulated for hydraulic brake systems
  • Mixes with all fluids meeting DOT 3 and DOT 4 specifications
  • Boiling point: dry 446°F, wet 311°F
  • For brake systems and hydraulic clutches, except systems using mineral base fluids
  • 355ml bottle
Choose Option
Ships same business day
$10.95
DRZ400 '00 - '03 DRZ400E '00 - '07 DRZ400S '00 - '25 DRZ400SM '05 - '25

B&B Off Road Engineering Fender Brace is made to help support your front fender/guard. Also helps support and reduce fatigue from constant vibration.

Made from 4mm 5083 structural aluminum plate. If you wanted to carry a small tool bag this would be a perfect product to support the weight and strap the bag to.

Fits on top of the fender and bolts between the fender and bottom triple clamp. Requires you to drill one hole in the fender for mounting.

Choose Option
Ships same business day
$73.95
CRF250L '17 - '20
  • Extra-thick material for durability
  • Legendary Acerbis fit and finish
  • Mount easily using included mount kits
  • Caps, applicable mount kits, fuel lines, petcocks and Y-fittings per application included as needed; fuel pump for EFI models not included, designed to accept the stock one.
  • Works with Acerbis' MDR gas cap
Choose Color
Ships in 3-5 business days
$285.95
Universal fit. May require additional adjustment or modification.

Ever had to turn back on the trail because of downed limbs? Or have you ever been moto camping and needed some wood for a fire?

This is the tool for you then! We have tried this manual chainsaw and it makes quick work of hard woods like Oak.

The chain itself is 25 inches long with 8 inch nylon straps at each end. All together this saw weighs 1/4 of a pound. This will tuck away nicely into any tool pouch or saddle bag as it roll up into a tight round.

Ships in 3-5 business days
$24.95
Universal fit. May require additional adjustment or modification.

If you use Rolie Bags or Rocky Mountain Expedition Saddle Bags, these Stuff-It stuff sacks will make it easier to pack and keep your gear organized.

Stuff-It stuff sacks are sized specifically for each size of Rolie Bag or saddle bag, built just slightly undersized so they’ll slide in and out with ease. You can also mix sizes for more packing options.

HiViz colors make them easy to see and see inside. Draw cord closure. The Stuff-It for Rocky Mtn/EXP Saddle Bags has handles for ease of removal, and can double as a ultralight tote bag.

Rolie Bags and Rocky Mountain Saddle Bags sold separately

All Stuff-Its are sold in pairs.

Fits Small Rolie Bag WP - HiViz Orange

Please contact us for availability information
$14.95
Universal fit. May require additional adjustment or modification.

Easily turn your blinkers into additional running lights and brake lights (rear) for added visibility.

White light in the front and red in the rear. Rear red running lights and bright red brake lights. You can omit the running and brake lights if you wish and still have the best blinkers on the market.

Dazzling bright Amber blinker functions. 

All in a spring-loaded stock to prevent damage from a tip over, crash or impact with brush, trees etc. They will bend 360 degrees, but are stiff, durable and nearly unbreakable.

If you have a single indicator light for the blinkers that is not built into the display and is not LED you will need the diode kit (AKA DR650)  If it is built in to the speedo display it should not require the diode kit.

Available in a generic kit with Bullet connectors supplied. Great for your DR or almost any other bike with a single post blinker setup. These will work well on bikes that use a flasher, but you might have to add the female side of the connectors that are included in the kit.

Not for Yamaha T7, see model specific listing

Choose Option
Add Diode Kit
Add LED Flasher
Ships in 3-5 business days
$225.95
Universal fit. May require additional adjustment or modification.

Set your bike apart with a custom exhaust look. Withstands direct heat up to 2000°F.

  • 2 inches wide and 25 feet long
  • Available in black or natural
  • 4 stainless steel tie wraps
Choose Color
Ships same business day
$45.95