Controls, $25 and Under
Grips
ProTaper Pillow Top Grip with 3-D (Tri-Density) Technology. Try the grip with the technical advantage of three dedicated rubber compounds.
The difference between the original Pillow Top and the Pillow Top Lite is the overall diameter of the grip surface. The Lite offers a smaller diameter so the grips don't feel as large reducing fatigue in your hands while riding.
- Vibrasonix pillow top reduces vibration and cushions impact.
- Inner core compound perfects the bonding interface with bars.
- Anti-Rip Tip™ uses denser compound to increase life of grip.
- Designed to self-clean and shed mud away from outer surface.
- Tacky gel-like surface compound is perfect for the trail and MX.
Fuel and Intake
Carburetor Repair Kit
Fuel Filter
Air Filter
- Unique triple stage foam filter designed for the most extreme conditions
- Eliminates the need for power robbing dust covers and outerwear covers
- Increased protection against silt, water, and sand
- Allows for extended filter service intervals
- Can be cleaned, re-oiled, and re-used like a 2 stage filter
- Used by factory off road teams around the world
- Dual-bonded foam design filters out even the smallest dirt particles, while allowing more airflow than two separate layer filters (flow bench proven)
- Twin Air filters are slightly smaller than stock to make them easier to change and to increase dead air space around the filter for better performance
- Flat foam sealing ring securely seats against the airbox, even in the worst riding conditions
Replacement filter only. Must have Twin Air filter cage for proper installation.
- Precision engineered to perfectly fit the factory airbox, these filters meet or exceed OEM specifications
- Direct replacement of original equipment filter with no need to change carburetor jets or settings
- Manufactured from world-class materials to achieve optimum performance and engine protection
EFI Controllers
Tried, true and tested the Power Commander continues to evolve with the Power Commander 6. Developed to simplify the user experience, PC6 makes choosing and tuning a map easier for the end user. All the same benefits you have relied on for over 20 years remain to keep you at the front of the pack.
The Power Commander 6 fuel injection tuning device allows you to optimize your fuel and timing curve (where applicable) giving you the confidence to roam freely. With fine tune adjustability and multiple inputs, the Power Commander 6 will keep your vehicle running at its full potential letting you concentrate on the journey ahead.
Featuring a plug-and-play setup, Power Commander 6 can be installed discreetly underneath your seat, cowl, dash or other location ensuring your ride looks as good as it runs. Removing the device reverts your vehicle completely back to stock. With the ability to store and switch between two maps on-the-fly (via the map switch accessory) and connect to various Power Commander accessories such as the Autotune, Quickshifter or POD-300, the Power Commander 6 gives you features and functions that provide you with the ultimate ride.
All PC6 models have an end-user adjustment of +/-15 in the FUEL table and +/- 8 in the timing table (if applicable). This adjustment is on top of the values that are in the BASE map loaded to the device. This BASE map can be any of the available maps from the Dynojet website, or those you may have received from a third party.
- Keep your EFI tuner secure with the Power Vision handlebar mount kit
- Vital ECU information can be within view, or use the imbedded datalog feature of the PV3 to log data and review later in Power Core software
- This universal kit will fit multiple handlebar sizes by using reducer bushings
- Works on handlebars up to 1-1/4”
- Made in the U.S.A.
Please note that the Power Vision 3 Handlebar Mount is used in conjunction with POD-300 Digital Display
Chemicals, $25 and Under
Chain Lube
Renthal chain lube is 100% lubricant, zero propellant. So this new 250ml bottle size combines high performance and value.
The all-new formula Chain Lube is specially designed to penetrate all parts of the chain. This all-condition lube is compatible with all o-ring and non o-ring chains.
This is a weatherproof protectant for wiring and electrical connections. Goes on as a liquid and dries to a vinyl polymer that resists dirt, dust, chemicals and moisture, ensuring that connections stay intact. Brush-top applicator allows coverage without gaps and enables access to tight spaces that roll tape and shrink tubing can't get to.
Adhesives
Tires
Dual-Sport
Motoz Tractionator Desert H/T series of tires are renowned for great traction and long wear life. These tires are designed to handle hard terrain, fast and rocky trails as well as gravel roads and desert hard pack. Tricky off-cambers, ruts and hard braking at extreme lean angles are no problem for this DOT approved tire.
Note: Tubes can be run in Tubeless tires, but a Tube Type tire cannot be run Tubeless.
From Shinko Tires, the 705 Series are DOT approved Dual Sport tires designed for 75% street and 25% trail riding. A versatile tread pattern provides excellent wet and dry weather adhesion and the compound resists tearing while riding off-road. "R" in size denotes a radial tire.
This is a great Dual-Sport tire from Dunlop. Designed for the true 50/50 rider. An Adventure product for the price-conscious customer. Full tread depth pattern designed for rigorous off-road use yields excellent traction on everything from hard-packed fire roads to soft single-track trails. Versatile tire performance allows riders to travel on the street and venture off-road. A tire equipped to go anywhere, the D605 is a value option for the all-around rider. DOT approved.
Mini-Supermoto
Ideal for smaller street bikes or smaller SuperMoto wheels.
Offers safety, durability with a ratio of grooves that has been increased to improve the balance between grip and wear.
Grooves run from the center to the shoulder to facilitate the evacuation of water and offer good grip on wet roads.
Possibly the best value for smaller SuperMoto tires.
Bias-ply and tubeless, S rated (max speed of 112)
Drivetrain
Sprocket
- Use a rear sprocket with a higher number of teeth for quicker acceleration and technical offroad trails.
- Use a rear sprocket with a lower number of teeth for lower engine rpm's at highway speeds.
- Stock size is 50 teeth.
We recommend using the Rear Sprocket Bolt Kit when installing most aftermarket sprockets on your TW.
Lighting
Turn Signal
- Eliminates the need to cut and splice wiring when using aftermarket turn signals or marker lights
- Plug into the OEM turn signal plug and then use bullet style connectors used on aftermarket lights
- To verify proper fitment, compare connector photos to OEM connector
- Sold in pairs
Fits Most Models
Eight ultra-bright amber LED lights in a sleek design. Flexible stem helps absorb the occasional hit. Available in 2 pack or 4 pack
Recommended to use resistor for proper turn signal flash rate.
Specifications
- Comes with mounting hardware.
- Measures 4" long with base and 1" wide at the lights.
The Barkbusters 10 OHM Resistor Set for LED Indicator Lights will correct the flash rate of your auxiliary signal lights. Ready to plug in connectors make installation a breeze. These resistors are intended for Barkbusters LED Indicator Lights.
Features:
- 10 OHM
- Intended for Barkbusters LED Indicator Lights
- Corrects flash rate of LED signals
- Flash rate: 90 (+/- 30) times per minute
Armor - Bike Protection
Brake Guard
Warp 9's CNC shark fin rear rotor protector. To make installation super-easy this fin bolts to a brand new CNC machined caliper bracket. Just remove your existing caliper bracket and remove the pins, install them on this new one and then put the caliper and fin back on.
Handguard
For Tapered 1 1/8" handlebar
Keep your hands and controls protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Heat treated aluminum backbones with two mounting points of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors, available in multiple colors, provide protection for your hands from the wind and brush. Ride longer, more comfortably with Barkbusters VPS lever and wind protection handguards
Features:
- Two mounting points provide secure protection
- Full wrap guards
- Heat treated aluminum backbone bars
- Includes VPS left and right plastic deflectors
- Easy installation
What's in the box:
- Left and right aluminum backbone bars
- Inner and outer handlebar mounting hardware for both sides
- Left and right VPS plastic deflectors
- VPS deflector fastening hardware
- Left and right adjustable position wind extension deflectors
- Installation instructions
Not recommended for Africa Twin, T7, Himalayan, or V-Strom. Please see specific listings for those models.
NOTE: tapered kit will not fit Renthal Twin Wall or Barkbusters VSBar
Frame
Footpegs
Pivot Pegz have set a new standard in footpeg performance and quality and now they are even better. The new Mark 4 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 4 also incorporates new heavy duty, long life springs and they come with a lifetime warranty. Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever!
- Wider, lighter, stronger design
- Widest (mm) and lightest pivoting pegs on the market
- Upgraded heavy duty, long life springs
- Unique multi-directional grip pattern
- Outstanding build quality
- Lifetime Warranty*
Luggage
Luggage Racks
PMR side utility racks are great for strapping down your soft luggage and keeping it off the rear plastics and exhaust pipe, while adding plenty of new tie down points for any luggage you have on your seat or tail section. They also add an enhanced level of security and strength to the rear end of your motorcycle in the event of a tip over or crash.
Sold as a pair. Easy to Install
- Complete with all necessary mounting hardware
- Fabricated with 1/2 inch steel tubing, MIG welded
- Finished with a semi gloss black industrial grade powder coat
- Comes with left and right side racks, each side weighs 2 lbs
The CRF300L side racks are intended to work hand in hand with their ENDURO Series rear rack.
If you plan on installing the side racks without their rear rack, you will need the spacer kit to fill in the empty space, which we will send to you at no extra cost. Please select the option when you place this in your cart.
Please note that you will need to remove the left side rack to access your lockable factory storage hatch.
A durable, lightweight option for your TW200 when transporting flexible luggage on the trail.
- Made of 15mm thick HDPE high density polyethylene plastic which is both durable and non-corrosive.
- Weighs up to 30% less than metal or aluminum racks.
- Convenient tiedown points designed into rack
- Kit includes mounting hardware.
Fender Bags
Secure storage of a spare tube, tire irons, or random miscellaneous items is a must for any trail ride or adventure. The OBR ADV Gear Fender Bag is constructed from a heavy duty industrial grade ballistic fabric that secures tightly to any fender via oversized heavy duty gutter hooks. The OBR ADV Gear Fender Bag also utilizes an optional double button snap system that when used eliminates any potential for shifting of the fender bag when riding off road or over rough terrain.
Features
- Heavy Duty industrial grade material construction with high strength UV resistant nylon webbing
- Heavy duty dust resistant #10 coil zipper with cover flap
- Secure attachment with oversized heavy duty gutter hooks
- Optional secondary button snap retainment system
- Sized to fit most HD 18” or 21” tubes
Keep essential items easily accessible with the OBR ADV Gear Sherpa Tail Bag. The OBR ADV Gear Sherpa Tail Bag attaches to your motorcycles rear rack via an optional strap free base panel or by a series of adjustable buckle straps. A padded spacious main compartment is perfect for carrying those items you wish to keep close such as tools, cameras, documentation, rain jacket, etc. A smaller mesh lid pocket sits above the main pocket for storage of smaller items.
Features
- High strength, abrasion and water resistant ballistic nylon construction
- Heavy duty #10 coil zippers with storm flap
- Secure attachment to your bikes rear rack via an optional strap free plastic mounting plate or adjustable buckle straps
- Spacious and padded trapezoid 9x10x5 main compartment
- Secondary lid mesh pocket adds even more storage
- Three sided reflective webbing with Molle loops
- 4 external D-rings on top lid with 3mm shock cord gives you a place to put those gloves during a ride break
Tank Bags
Keep essential items easily accessible with the OBR ADV Gear High Basin Tank Bag. The OBR ADV Gear High Basin Tank Bag attaches/secures easily to any bike via two adjustable buckle straps at the rear of the bag and one adjustable strap at the front. Utilize the included interchangeable stow pocket for additional top storage or the map pocket to keep your route in constant view.
Features
- High strength and water resistant 1680d ballistic nylon construction
- Heavy duty dust resistant #10 coil zipper with storm flap
- Trapezoid front profile that improves the bag interface with riders legs
- Secure attachment through bikes frame/sub frame utilizing supplied adjustable SRB buckle straps
- Spacious 7x8x5 main compartment with front mesh slip pocket
- Includes interchangeable 6x7 zippered stow pocket and 6x10 map pocket that securely snaps onto top panel of lid for easy access or constant view of routes
- Internal D-ring for clipping keys or other important items to keep secure
- 4 external D-rings on top lid with 3mm shock cord for misc. storage
- 1” web grab tabs that can be used to run a cordage handle through
Need some extra protection from Mother Nature? We’ve got you covered with a full rain cover designed to slip over your Big Sky Tank Bag.
Features
- Heavy duty PU coated 400d nylon construction
- Drawstring retention cord cinches securely over your Big Sky Tank Bag
- Quick and easy On/Off versatility
* Big Sky Tank bag sold separately
Straps
Every backcountry adventure-seeker needs a handful of these multi-purpose straps with virtually unbreakable fasteners. Each pair of stretch polyurethane Pronghorn Straps™ feature stamped aluminum buckles sheathed for scratch protection with arrows that line up for easy fastening. Each buckle prong holds the strap in place for pre-fitting and easy chaining of straps together.
Available in color-coded 18-, 25- and 32-inch lengths and marked by size, you’ll find a million uses for Pronghorn Straps—motorcycle, sled, snow bike, 4×4, ATV, UTV/SXS—and so much more!
- 18” L x 0.75” W (46 cm L x 2 cm W); length adjustable from 6.5″ to 15″ (17 cm to 38 cm)
Fuel Storage
Introducing the Armadillo Bag®—your new best friend for on-the-go adventures! These flexible, collapsible, and lightweight utility bladders are perfect for safely transporting and storing liquid hydrocarbon products, as well as other powersports and automotive fluids. Choose from a variety of sizes: 1, 2, 3, and 5 gallons. Plus, each bag comes with a handy pour spout for easy use.
Features:
- After the fluid is dispersed the Armadillo bag can be collapsed rolled up and stored in a compact areas like backpacks, rack bags or under the seat of the vehicle.
- Daisy loops on bags allow the bags to be attached almost anywhere, backpacks, utility racks, snowmobile/snow bike tunnels, UTV beds.
- Armadillo bags will not tip and spill like traditional hard containers.
- Weight and space savings over rigid fuel containers are significant advantages of the Armadillo Bags.
Armadillo Bags are not portable fuel containers as described by ASTM, EPA, ARB or other state and federal agencies. Armadillo Bags are NOT intended for fuel storage or transport in the USA.
Rolled Empty diameter | 2.5 inches (6.35 cm) |
Weighs | 0.75 pounds (12 oz) |
Flat Filled dimensions | L x W x H: 16.5" x 10" x 3" (41.91cm x 25.4cm x 7.62cm) |
Engine, Electrical
- Protect your DR650 from overheating.
- Inline temp block kit works with Trail Tech computers Striker, Vapor, Voyager, Voyager Pro, and all TTO temp meters.
- Installs between the oil cooler and top oil supply line, giving a cooled oil temp reading.
- Includes 3 new o-rings, and 2 longer bolts, as well as the Trail Tech m6x1.0 temp prob.
Engine
Crankshaft
Big Bore
Includes forged Wiseco 83mm Piston (83.00/+4.00 10.5:1), Rings, Clips, Pin.
- All Wiseco Pistons are forged from high silicon, low expansion aluminum which offers superior strength, reduced weight, improved heat transfer, and longer life.
- Diamond turned finish from one of the many CNC computer controlled turning centers guarantees you a perfect finish with no size variation. Wiseco pistons can be installed in any of today’s cylinder bore compositions
- Wiseco’s state-of-the-art computerized manufacturing facility is dedicated to supplying both the high-perfomance racer and recreational enthusiast with the finest forged piston available in today’s market place.
Top end gasket set.
- Raises compression for better low end power.
- Graphite gaskets feature a steel core, laminated on both sides with flexible graphite.
- Fiber gaskets designed for maximum seal, flexibility and torque retention.
- O-ring gaskets meet or exceed oem specifications.
Spark Plug
E3 Resistor Spark Plugs
The unique design of the electrode maximizes the power generated by the spark plug through Diamond Fire technology. This electrode combines advanced performance capabilities and innovative technology to enhance the shape of the flame kernel. Consequently, the flame front ignites the air/fuel mixture more rapidly, accelerates heat transfer into the combustion chamber, and creates a more concentrated pressure front, facilitating a quicker pressure rise during the cylinder power stroke. The outcome is a more efficient combustion process and improved engine performance, making this a truly premium spark plug.
Clutch, Gasket
Brakes
Master Cylinder Rebuild Kit
Pads
Brake Line
GBrakes Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.
The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.
- Significantly improves response and feel over factory rubber lines
- Largest performance improvement for your money over any other braking upgrade
- Stainless steel hose resists abrasion and puncture
- Teflon core does not degrade over time like rubber lines
- PTFE Dupont 64 Teflon® hose
- Feature a heavy-duty stiffener sleeve and route just like the factory lines
- Proprietary, premium fittings
- Banjos utilizes a unique machined channel and sealing surface for leak-free installations
- R&D and engineered in the USA
- GBrakes USA controls the manufacturing process, ensuring the highest level of quality control
GBrakes Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.
The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.
- Significantly improves response and feel over factory rubber lines
- Largest performance improvement for your money over any other braking upgrade
- Stainless steel hose resists abrasion and puncture
- Teflon core does not degrade over time like rubber lines
- PTFE Dupont 64 Teflon® hose
- Feature a heavy-duty stiffener sleeve and route just like the factory lines
- Proprietary, premium fittings
- Banjos utilizes a unique machined channel and sealing surface for leak-free installations
- R&D and engineered in the USA
- GBrakes USA controls the manufacturing process, ensuring the highest level of quality control
Gas Tanks
- Increased tank 14L / 3.6 Gallons.
- Impact and abrasion-resistant.
- Ideal for both competition and long and short-distance tourism.
- Designed to maintain a narrow profile to ensure excellent driveability.
- Possibility of fitting cap with Acerbis key.
Included with the Tank:
- Acerbis cap
- Assembly kit
You want a lighter replacement for your heavy steel stock tank? Don't need the extended range (or bulk) of a big tank? The 3.7 gallon tank from Clarke might be just right. It's almost 5 lbs lighter and holds close to 1/2 gallon more fuel than stock to increase your range by about 20 miles. Fits with your stock petcock, Pingel or Raptor petcock.
Petcock
A popular upgrade from the stock vacuum operated fuel valve. Manually operated. Must be shut off any time the bike is parked for more than a few hours. Fits stock tank or aftermarket tank and has both main and reserve. Fully rebuildable.
Really like your stock vacuum petcock and never having to worry about turning it off? Did the seals go bad and it leaks? Plugged up? Well, whatever your troubles, here is your replacement. Vacuum operated so you never have to turn it off! Just like the stock unit. Includes mounting bolts with washers, fuel line, clamps and a protecting coil wrap.
Does your stock vacuum operated petcock not shut off when your bike is parked? Replace your stock vacuum operated petcock with this manual one. Must be shut off any time the bike is parked for more than a few hours. Fits stock or aftermarket tanks. Plastic tanks may need the hole 'ovalized' to fit the dual standpipes.
Does not fit OEM XR650L metal tank
Fuel Line
You’d be amazed at the dirt and debris that can work its way into your gas can – and from there, your fuel tank. Twin Air’s monofilament screen pocket inserts in your tank to catch particles as small as 40 microns (.00165”) while allowing the gas to flow freely.
The flange is custom-sized for each modern 4-stroke model to ensure a leak-proof seal. Just remove the filter periodically, turn it inside-out, and clean out the debris that could have been in your engine.
Will not work with factory locking gas caps.
Inside tank inlet diameter must be approximately 43.5mm (1.71") to fit.
Tools
Rider Support
Repair Manuals
Wheels
Bearings
High Quality Replacement Wheel Bearings and Seals for your TW200.
Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.
Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.
Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.
Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.
Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.
The rubber coated outside diameter creates an optimum seal at the hub.
Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.
Description | QTY per Kit |
Ball Bearing | 2 |
Seal | 1 |
Rear wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.
Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.
Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.
Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.
Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.
The rubber coated outside diameter creates an optimum seal at the hub.
Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.
Description | QTY per Kit |
Ball Bearing | 3 |
High Quality Replacement Wheel Bearings and Seals for your TTR125 with disc brakes.
Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.
Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.
Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.
Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.
Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.
The rubber coated outside diameter creates an optimum seal at the hub.
Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.
Description | QTY per Kit |
Ball Bearing | 2 |
Seal | 2 |
Exhaust
Muffler
DG Performance exhausts help your engine breathe better, resulting in increased throttle response, power and torque.
The V2 Series Slip-On muffler features:
- Lightweight aluminum body
- Stainless steel inlet tube
- TIG welded components
- Great new look
Standard sound level is approximately 98 db and quiet core inserts are available separately.
This Lightweight Slip-On weighs approximately 5.5 lbs and bolts directly to the stock headpipe.
It is equipped with a US Forest Service-approved spark arrestor.
- Reduce exhaust sound by one to six decibels
- Options for DG V2 & RST and for the older "O" & "R" Series mufflers
- Easy installation; remove rear end cap and place Quiet Core in front of the spark arrestor
- Smaller diameter inserts are quieter but more restrictive; larger inserts are less restrictive but louder
- 1" Not recommended for RST
- Each size is sold separately
- Works with DG V2 & RST mufflers
The RS-4 Race Series slip-on gives the CRF250L more power and torque, the RS-4 provides more punch at bottom end without sacrificing the mid and top power. The slip-on also removes a good amount of weight from the stock unit. Those that love the Yoshimura RS-4 sound will love the way it makes the CRF250L Rally sing!
Proudly made in the USA!
- Pentagonal-shaped sleeve
- Front muffler cap functions as a polyresonant chamber which helps reduce noise
- Two-stage stepped baffle
- Turn-out carbon fiber end-cap
- Stainless steel tail-pipe
- RS-4 stainless slip-on weight 7.8lbs vs Stock muffler weight 10.3lbs.
The RS-2 removes 2 pounds from the stock unit and it also provided the XR an increase of +5% max HP and 1.7% max torque. Now the XR has gains across the entire power spectrum and is ready to tackle trails and highways alike.
This RS-2 Enduro Series Slip-on includes an installed USFS spark arrestor SA-02-K.
Yoshimura's RS-2 is proudly designed, developed and manufactured in Chino, California.
Full System
The EVO R series draws on our rich heritage of making power. Offered for various off road MX and sport ATV models, the EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.
- Hard anodized oval shaped aluminum muffler
- TIG welded reinforced muffler bracket(s)
- 304 stainless steel mid pipe / head pipe
- Red powder coated stainless steel end tip
- Lighter than stock exhaust system
- Huge horsepower and torque gains
- Sleek muffler design allows for maximum clearance
- Removable screen-type spark arrestor included
- Handmade in the USA
- 1 Year Limited Manufacturer’s Warranty
Heat Shield
Spark Arrestor
- Updated version with weldnut inside of insert makes installation/removal easier
- Replacement USFS Approved Spark Arrester for RS-4 Mufflers with "Turn-out" end-cap.
- Available as optional Spark Arrester on applications not originally equipped with a Spark Arrester
- Kit Includes:
- Spark Arrester Insert
- End-cap collar
- Set screw
Tools, Accessories
Rider Support
- Stop your expensive helmet from falling and hitting the ground while you’re out riding
- The perfect solution to easily store your helmet with your bike.
- 7075 T6 machined aluminum
- Fits all 7/8 handle bars
- Includes 2 stainless screws
- Fits virtually all bikes and makes ( except Harley )
Wheels, Tools
Wheel & Tire
Always wanted to build or true your own wheels? Maybe just be able to balance your wheels after changing tires. This stand is perfect for both of those tasks.
- Features a bubble level to balance wheels correctly the first time
- Steel plate construction for durability and stability
- Comes with shaft, cones and spacers to fit just about any wheel
Suspension
Fork Seals & Bushings
Patented fork seal features a balanced 3 lip design that evenly distributes the pressure reducing operating temperature, wear and friction
Custom Elastomer Fork Seals have been tested to outlast OEM fork seals. Extends typical seal life by 3 to 5 times over OEM seals
Stiction (friction) measures from 1/3 to 1/2 less than OEM seals for smoother fork action
Lower Stiction, Longer Life! It doesn’t get any better than this!
Plus, the only complete line of dust wipers! Wipers should be replaced with the fork seals to assure peak performance.
Kit includes Fork Seals and dust wipers.
Shock Bearings & Seals
Shock
Cogent Dynamics Mojave product is a drop-in replacement for the DR650 stock shock, no modifications necessary. Mojave is not simply an improved Suzuki shock, it is a brand new replacement shock that is a totally engineered suspension solution to suit your needs.
Each shock is assembled and tested on the Cogent Dynamics suspension dyno before being packed up and shipped. Like its bigger brother the Mojave Pro Series, this will make an incredible difference in the handling of your DR.
Mojave Improvements over stock
Mojave upper mount: uses a precision spherical bearing with dust seals, which accurately transfers damping forces to the motorcycle frame.
Internal improvements: Cogent designed shaft, seal head, damper piston, adjuster and clevis.
Mono tube construction: precision honed, super-stiff steel body with an upper body cap machined from billet aluminum.
Built-in billet aluminum separator piston provides an in-line gas pressure reservoir which eliminates the Suzuki rubber bladder.
This shock package includes the CNC machined Bling Ring Preload Adjuster Collar and Preload Bearing that will make preload adjustments easy.
Select the spring you want installed based on the load you plan to carry. For riders (and gear) less than 250 pounds we recommend the 7.6 kg/mm spring. If you regularly have more than 250 pounds the bike, you might want to use the 8.15 kg/mm spring. If you have any questions at all about this, please call.
You may choose to add the Hydraulic Preload Adjuster to make it the easiest of all. All you do is twist the knob. Includes mounting bracket for knob unit. (Some CA carb compliant models may need slight modification for mounting the preload adjuster.)
Low shock also available. This option will lower your seat height 1" without the need for lowering links. All other features of this shock are the same as the stock height.
Controls
Cable
Levers
We have worked closely with Magura to come up with a kit that fits properly.
Want an easier pull on your DR clutch? No cable to break? Then say hello to the Magura Hymec Hydraulic Clutch. Simply remove the stock perch, lever and cable in bolt this in its place. This system replaces the stock cable with a small lightweight hydraulic system for improved clutch control, easier operating pressure, a constant pressure point and smoother actuation.
Developed over many years and tested under the toughest conditions possible in the off-road motorcycle world. World champions to novices all agree on the benefits of the Hymec Hydraulic Clutch system. Due to demand, Magura is now making this available for many dual-sport motorcycles, and now the DR650!
Never hurts to have a bit of the Margura specific Blood Red hydraulic fluid sitting on your shop bench. 4 oz. bottle available as an option.
Specially designed shift lever with arm shape suitable for off-road riding, off-road boots, and wide footpegs, and with more space between shift and footpegs.
The revolver system allows for 6 different tip positions including the standard position, which is not available on the stock.
The tip is made of A7079 and is machined with high precision. Knurling on the tip prevents slipping.
Forged A2014 material is used for the arm part, which has high strength and durability.
These tips are for the Warp 9 Shift Levers only.
These are held to the cast Warp 9 lever with a pin and e-clip making them easy to change out. Includes new pin and e-clip in case you lose yours.
You can also order just a new pin hardware kit which comes with new pin and clip.
Bar Risers
- 4.75" wide,
- Raises handlebars 2 inches and allows fore/aft position adjustment
- Provides dual pivot points for optimal bar positioning
- One piece design is made from solid aluminum for superior strength
- Available for 7/8" - 7/8" or 7/8" - 1 1/8" bars
Requires 7/8" factory bar clamps on bike
Handlebar, Bar Risers
This bar kit will raise your hands 5.5" up from the factory riding position. If you are over 6 feet tall, this is the kit for you! It allows for a more natural riding position, no more bent neck and being hunched over the bars. You will be able to ride comfortably and more aggressively by installing this kit.
The ProTaper bars are taller and tapered from 1 1/8" to 7/8" and the braided stainless steel brake line will be a serious improvement to your braking ability. Braking becomes more responsive and firmer while adding a stylish look to your TW200.
Everything you need is in this kit to properly raise your bars:
- ProTaper ADV High handlebar
- PowerMadd 2" bar riser
- Harness extensions
- Longer braided steel brake line
- Longer clutch cable
Grips
Ease the pressure on your wrist during those long highway drones out to where the fun begins. ProCycle has developed this kit that includes a Vista-Cruise throttle lock, a specially modified alloy throttle tube and an anchor plate that attaches to your throttle housing. Just flip the thumb lever down to apply enough friction to hold the throttle in place. Use the supplied longer screw to attach the anchor plate to your lower throttle housing bolt hole. Also included is a tension adjustment tool that you can keep on your key ring. Keep the applied tension lightly adjusted so it's easy to roll the throttle off.
Fits bikes with dual cable throttle housings.
Engine, Liquidation Deals
Oil Filter, Sale
This is all you need to not only change your oil, but protect your motor as well. We include a magnetic drain plug in the standard kit, to help catch stray metal pieces, a 5-pack of oil filters, and new O-Rings to replace any you have that may be leaking or worn.
JNS kit includes:
- custom ProCycle oil filter guard
- 5 oil filters
- set of fresh o-rings
Body
Headlight Cowling
Complete Kit
Formerly DSA, now ProCycle brand, is a plastics kit in three colors - Black, White, and Blue, as well as Blue fenders with White side panels and Black fenders with White side panels. (headlight cowl not included).
Vacuum molded, these parts are a design improvement over the stock pieces. The side panels have a crisper, more angular look than the stock parts while the front fender is shaped like the DRZ400SM OEM front fender. Big enough to be functional without wind-steering the bike like the stock fender does.
Kits include front and rear fenders, a new LED tail/brake light and license plate holder, and both side panels.
Add a fresh new side panel hardware kit and an adhesive heat shield for a fresh off the showroom floor look.
Add a stock Suzuki headlight cowl if you are doing a complete color change to your DR (must select plastic kit with head light cowl option)
Windscreen
The Rally windscreen from Parabellum is the perfect protection from wind and debris without sacrificing technical off-road capabilities. This is an upright rally type windscreen that looks aggressive and performs well under all types of riding. Designed primarily for the off-road / dualsport enthusiast, this shield keeps pressure off the rider's chest while commuting from home to adventure and back.
This windscreen mounts securely to the three stock windshield holes as well as the two side cowling mounts. The shield is 14 inches tall, 13 inches wide at the bottom narrowing to 11 inches at the top. Made from 3/16" military aircraft grade cast acrylic.
The touring windshield from Parabellum has been designed, developed and tested using all the knowledge and experience of the KLR riders in their own shop. Using the stock mounting points as well as the cowling mounts increases the rigidity of the shield.
All new fasteners are included. This new design allows you to move your handlebar to different positions and will not interfere with a stand-up position for off-road use.
This shield is constructed of 3/16" military grade cast acrylic that is 17 inches wide at the bottom tapering to 16 inches at the top.
Drivetrain, Tools
Sprocket, Drivetrain
ULTIMATE SPROCKET WRENCH KIT
- 12” long wrench gives you more torque to get those thread locked sprocket bolts off easily
- Double ended 12mm & 13mm to fit all modern motocross, Enduro and dual sport bikes
- Dog leg wrench design allows wrench to easily clear rim edge and wide tires
- 8mm allen fits most Japanese bikes 8” long for extra leverage
- Torx T45 fits late model KTM and Husqvarna bikes, 8” long for extra leverage
- Vinyl coated handles to protect rim edge and give a non slip grip
- Makes routine sprocket bolt maintenance a quick and easy job
Luggage, Tools
Accessories, Rider Support
It seems that while packing for every adventure … we always end up with a few items that were either neglected to be packed, were last minute gear additions, or just needed to be packed in a readily accessible location…. The OBR Adv Gear Tool Pouch is the perfect solution for these miscellaneous items. Once packed the tool pouch can be slipped into any bag or attached externally using integrated webbing loops that are built into the pouch.
Features
- Heavy duty industrial material construction with high strength UV resistant nylon webbing
- Heavy duty #10 coil zipper that won’t jam up in the dust
- External reflective webbing with Molle loops
- Pouch dimensions 5” x 13”
* Tools not included
In order to be prepared for all possible mechanical mishaps along the trail or on any adventure, we are required to carry a certain selection of tools. The OBR ADV Gear Tool Roll will help keep those tools together and stored in an organized fashion easy to be found should one of those mechanical mishaps occur.
Features
- Heavy duty ballistic nylon construction
- Heavy duty #8 coil zipper
- Individual Tool Slots for Tire Irons, Wrenches, Screw Drivers … along with a zippered pouch providing secure storage for those smaller items
- Detachable 10”x10” slip pocket cover flap that also doubles as a hub pad keeping your hub out of the dirt when changing a flat
- Open dimensions 11” x 17”
Lighting, Body
License Plate
Gas Tanks, Lighting
Turn Signal
Armor - Bike Protection, Liquidation Deals
Skid Plate, Sale
Additional protection against rocks and contact with the ground for the engine: the high-quality, aluminium alloy engine guard shows what it's capable of off the street, but provides extra safety and an individualized look on the streets, too. State-of-the-art production gives these bike-specific protectors a secure fit. The installation on frame mounting points lends additional stability and allows for easy installation.
- Underbody protection against stone chips and collisions
- Reliable and easy installation on original attachment points, modifications to the motorcycle are not required
- Bike-specific development for perfect fit
- Mounting material included in delivery
- Durable design made of high quality aluminum alloy
Electrical
The Trail Tech Vapor Speedometer/Tachometer units are custom designed for an exact fit. They feature a bright white backlit LCD display, waterproof connections, and all parts needed for a complete installation. These units accept AC and DC power input, and automatically switch to internal power if external power is removed. Power connectors are included. Permanent solid-state memory guarantees that data is never lost, even without power. Units are available in black.
Trail Tech provides a one year warranty and unlimited free phone and email support.
Unit functions:
- Speedometer
- Current Speed
- Maximum Speed
- Selectable MPH/KMH Display
- Tachometer
- Real-Time RPM Bar Graph
- Numeric RPM Readout
- Dual Programmable Shift Lights
- Up to 20,000 RPM
- Temperature
- Ambient Temperature
- Engine Temperature (liquid cooled only, optional air cooled sensors available)
- Dual Programmable Temp Lights
- Distance
- Adjustable Distance
- Permanent Odometer
- Selectable Mile/Kilometer Display
- Clock
- Hour Meter, Stop Watch, Ride Time
- Accumulated Ride Time
- Permanent Hour Meter
Accessories, $25 and Under
Gas Tanks, Luggage
Fuel Storage
RotoPax are Rotational Molded - the process which produces indisputably superior products.
- Thicker walls and stronger construction
- Bright colors that are less prone to fading
- Extra threads, thicker walls, and sure-seal gasket guarantee no leaks
Need to mount two containers? A water and a fuel? Two waters? Finally, you can stack multiple packs together! Use in conjunction with a pack mount. You will need to purchase the Single Mount as well as the Extender.