Controls
Cable
Grips
Levers
Mirrors
Exhaust
Gasket
This gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head. Get a fresh set now avoid having an exhaust leak when you install your new exhaust. This is for a set of two gaskets.
This gasket seals the joint between the head pipe and muffler. These gaskets are easily damaged when removing the original muffler. FMF mufflers do not require a joint gasket but the all other aftermarket mufflers as well as the stock muffler require a joint gasket. Get a fresh one now to ease installation of your new performance muffler.
Muffler
The DG RST (Reduced Sound Technology) muffler is the quietest DG muffler and is designed especially for dual-sport machines (Just 89db @ 3200 RPM). A new baffle design dissipates sound waves reducing noise output in a very efficient manner. This new design also stretches out the time between muffler repacks. Included is a Stainless Steel mid-pipe, USFS Approved Spark Arrestor and a new Aluminum end cap.
You may want to consider a new exhaust gasket that goes between the header and the muffler.
- The Q4 employs intricate chambers, baffles and proprietary multistage packing material making it the best performing quiet muffler available
- Constructed from aircraft grade aluminum and high strength stainless steel
- Sound output 96dB
- 8 pounds lighter than the stock muffler
Full System
Headpipe
Did you snap a headpipe bolt on your XRL or are your headpipe bolts looking a bit dingy and rusty?
These replacement header exhaust stud bolts are made of super corrosion resistant 316 stainless steel. They provide excellent resistance to chemicals and saltwater to give your exhaust system a hassle free service life.
If you've got an older XR650L, you know the struggle of removing the O.E. nuts from the studs. They either snap, remove the stud or come off as they should. At some point you're likely to snap on or come across a seized nut to stud. These bolts are a superior upgrade to the O.E. nut and stud.
Kit includes: 4 Stainless Steel bolts
Tires
Dual-Sport
From Shinko Tires, the 705 Series are DOT approved Dual Sport tires designed for 75% street and 25% trail riding. A versatile tread pattern provides excellent wet and dry weather adhesion and the compound resists tearing while riding off-road. "R" in size denotes a radial tire.
Supermoto
From Shinko Tire, the 705 Series are DOT approved Dual Sport tires designed for 75% street and 25% trail riding. This aggressive tread pattern provides excellent wet and dry weather adhesion.
Note: Tires in the dropdown menu with an -R behind them indicate Radial Tires.
Tubes
Luggage
Fender Bags
- Made with Industry leading UltraMax® fabric
- Maximum UV protection against fading
- Heavy duty webbing and buckles for easy and secure mounting
- Fully expandable (Dual Sport/Enduro & Adventure only) with reflective piping
- Rigid construction allows the bag to hold its shape when empty
- Water resistant lockable zippers help keep out dust and dirt
- Inner self-fastening straps to better secure contents
- MOLLE panel on lid allows other items to be strapped down
- Rubberized carry handle for easy transport
Lite:
- Dimensions: 9.75” L x 8.5” W x 4” H - Holds 5.5 Liters
- Expanded: DOES NOT EXPAND
The glove box for your motorcycle! The Zigzag handlebar bag is their smallest bag yet also one of their most popular. Sometimes you only need the basics like your wallet, phone, registration, and other small items, and no matter what you’re riding, the Zigzag handlebar bag delivers quick and easy access to the basics.
- VOLUME: 1.5 liters (92 cubic inches)
- DIMENSIONS: 10.5” L x 2.5” W x 4” H (27 cm L x 6 cm W x 10 cm H).
- MATERIALS: Rugged Bomb Shell™ vinyl coated fabric, and Mil-spec materials and hardware.
Luggage Racks
PMR side utility racks are great for strapping down your soft luggage and keeping it off the rear plastics and exhaust pipe, while adding plenty of new tie down points for any luggage you have on your seat or tail section. They also add an enhanced level of security and strength to the rear end of your motorcycle in the event of a tip over or crash.
Sold as a pair. Easy to Install
- Complete with all necessary mounting hardware
- Fabricated with 1/2 inch steel tubing, MIG welded
- Finished with a semi gloss black industrial grade powder coat
- Comes with left and right side racks, each side weighs 2 lbs
Precision Motorcycle Racks strongly recommends these side racks be used with their Top Rack because the racks use each other to mount properly. They were never intended to be used by themselves without the rear rack.
If you are going to mount these side racks without the use of their top rack please select the extra hardware kit option that includes 2 brackets, 2 steel spacers, and an extra hardware kit that is required for proper installation.
These side racks will not play nice with any other brand rear rack, and installation without their top rack will prove to be quite difficult.
- CNC laser cut from light weight 1/8" 5052 Aluminum
- Easy installation, no modifications required
- Large 12" x 9" surface area
- Sleek low profile, and lightweight!
- Rigid 4 point mounting system
- RotoPax 1 gal or 1.5 gal compatible
You may purchase just the rack or you can order the Rack with the RotoPax Mount. If you really want it all, you can order the Rack, Mount and a Fuel or Water Container.
Maximize your Kawasaki KLX250 or KLX300's cargo capacity with T-Rex Racing's heavy-duty luggage rack grab bar system. This robust steel rack provides secure mounting points for tail bags, cargo boxes, and camping gear while doubling as passenger grab bars for two-up riding.
Precision-engineered for KLX250 and KLX300 models, this bolt-on accessory features powder-coated finish for corrosion resistance and maintains the bike's adventure-ready aesthetic.
Easy installation with included hardware makes this essential upgrade perfect for adventure touring, dual-sport camping, and long-distance riders who need reliable cargo solutions for their Kawasaki motorcycle adventures.
Straps
Mondo Straps are named after the classic motorcycle movie, "Mondo Enduro". When they set out on their world trip they had hard luggage on their bikes. By the end of the movie the riders that were still pushing forward were all using simple straps and some homemade dry bags. The simple fact is soft luggage is more durable off road than hard luggage.
The Mondo Straps Kit has been designed to work with or without their Uprising Soft Rack. These straps allow you to use any bag you want for luggage. When installed properly you will be able to thrash about offroad and your luggage will stay put!
To use the Mondo Straps make a girth hitch around any mount point on your bike. Next, thread the flat runner back through the heavy duty metal cam buckle and pull it tight. The Mondo straps are easy on and easy off. The integrated tensioner system will keep your luggage in place no matter what terrain your adventure takes you on!
Kit Includes:
- 2 Heavy Duty Cam Buckle Tension Loops
- 2 Four Foot Runner Loops
Accessories
Giant Loop is aiming for smaller, lighter security in the form of its new compact Quick Loop Cables, available in 36- and 84-inch lengths. These cables roll up into a compact coil with an included hook-and-loop strap for easy storage. Both of these cables weigh under 6 ounces. A bright orange vinyl cable sheath not only protects the bike's finish from scratches, but it also provides high-visibility that, according to Giant Loop, is for "discouraging the opportunistic grab-and-dash thief to move on to an easier target."
The 84-inch cable integrates with Giant Loop's Great Basin Saddlebag and Siskiyou Panniers and other large bags which feature cable pass-throughs so riders can secure their luggage to a parked motorcycle. The 36-inch cable is more suited to locking a helmet or riding jacket to motorcycles. These cables do not include a lock.
Armor - Bike Protection
Radiator & Oil Guard
Radiator guards from Devol Racing protect your radiators from damage due to trail side objects and roost bullets. They offer protection not just from frontal assaults but also from those tricky side attacks. Made from high-grade aluminum alloy for light weight and strength, these guards have an improved air-flow design that eliminates any overheating problem. A solid mounting to the frame make these stronger than most guards that just mount to the radiators themselves.
Devol Racing makes a super product that will keep you on the trail for a long time.
Handguard
The X-Factory Handguards from Acerbis are designed with a steel bar encased in an injection-molded Nylon composite. A replaceable dual-injected polypropylene shield attaches to the bar, providing excellent protection against debris and harsh conditions.
Included with the handguards is a universal mount kit, enabling installation on either 7/8" or 1 1/8" handlebars.
Will not fit XT250 with stock handlebars (oversize bars ok). Recommend Acerbis Rally Pro X-Strong to clear master cylinder.
Electrical
Battery
These are the first batteries with built-in jump starting. They intelligently monitor their status, and just before going completely dead, puts itself to sleep with just enough energy to get your vehicle started again. Simply press the RE-START button located on the battery, start your bike and ride away.
These are an extremely lightweight (2.5 lbs.) high-powered Lithium-Ion replacement battery for motorcycles. These batteries offer the first Battery Management System (BMS) found on a powersport battery and includes low-voltage cut-off, over discharge, over-charge, and thermal protections with real time lithium-ion cell balancing. Use of a lithium specific charger to maintain the life of the battery is highly recommended.
Product Size is 8.4"L x 5"W x 2.2"H. If you need spacers, select the optional Foam Kit to pad the battery in the battery box.
The ultimate factory activated lead-acid battery upgrade from stock.
40% more amp-hour capacity and 70% more cold cranking amps (230) than the stock battery. This is a genuine YUASA battery. Lasts longer and has increased vibration resistance. Ships pre-filled, sealed, and ready for use.
Note: This battery is taller than stock. The factory battery strap cannot be used to secure it. Factory-activated batteries should be charged once a month when not in service.
Dimensions: 6" x 3-7/16" x 4-3/8"
Weight: 8.5lb
12V/11.2AH 230cca
Positive terminal location: Left Front
CDI
The Trail Tech Vapor Speedometer/Tachometer units are custom designed for an exact fit. They feature a bright white backlit LCD display, waterproof connections, and all parts needed for a complete installation. These units accept AC and DC power input, and automatically switch to internal power if external power is removed. Power connectors are included. Permanent solid-state memory guarantees that data is never lost, even without power. Units are available in black.
Trail Tech provides a one year warranty and unlimited free phone and email support.
Unit functions:
- Speedometer
- Current Speed
- Maximum Speed
- Selectable MPH/KMH Display
- Tachometer
- Real-Time RPM Bar Graph
- Numeric RPM Readout
- Dual Programmable Shift Lights
- Up to 20,000 RPM
- Temperature
- Ambient Temperature
- Engine Temperature (liquid cooled only, optional air cooled sensors available)
- Dual Programmable Temp Lights
- Distance
- Adjustable Distance
- Permanent Odometer
- Selectable Mile/Kilometer Display
- Clock
- Hour Meter, Stop Watch, Ride Time
- Accumulated Ride Time
- Permanent Hour Meter
Armor - Bike Protection, $25 and Under
Headlight Guard
This optically clear headlight guard is CNC cut for a perfect fit on your XT250 headlight lens.
It is made of durable aircraft grade 3/16" thick cast acrylic which resists harsh rock impacts, trail scuffs, and incidental scratches.
Velcro fasteners hold the guard firmly in place and allow for easy on & off should it need an occasional cleaning. Installation is a quick five minute job, positioning template included.
Brakes
Master Cylinder Rebuild Kit
Rotor
Premium 310MM floating brake rotor for the Suzuki DRZ400SM. Direct bolt-on replacement with 6-bolt configuration and 3.8MM thickness.
Enhanced braking performance, superior heat dissipation, and improved durability for street and supermoto riding. Professional-grade floating rotor design prevents warping and delivers consistent brake feel.
Perfect DRZ400SM brake upgrade at exceptional value compared to OEM parts. Engineered specifically for DR-Z 400 SM brake system compatibility.
Premium 230MM rear brake rotor for Yamaha WR250R/WR250X. Direct bolt-on replacement with 6-bolt M6 configuration and 3.6MM thickness.
Enhanced rear braking performance and durability for street and off-road riding. High-grade steel construction delivers reliable stopping power and long-lasting performance.
Perfect WR250R rear brake upgrade or replacement rotor. Engineered specifically for WR250R/WR250X brake system compatibility at an exceptional value.
Premium 250MM floating brake rotor for Yamaha WR250R. Direct bolt-on replacement with 6-bolt M6 configuration.
Enhanced braking performance, superior heat dissipation, and improved durability for street and off-road riding. Professional-grade floating rotor design prevents warping and delivers consistent brake feel.
Perfect WR250R brake upgrade at exceptional value compared to OEM parts. Engineered specifically for WR250R brake system compatibility.
Brake Line
GBrakes Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.
The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.
- Significantly improves response and feel over factory rubber lines
- Largest performance improvement for your money over any other braking upgrade
- Stainless steel hose resists abrasion and puncture
- Teflon core does not degrade over time like rubber lines
- PTFE Dupont 64 Teflon® hose
- Feature a heavy-duty stiffener sleeve and route just like the factory lines
- Proprietary, premium fittings
- Banjos utilizes a unique machined channel and sealing surface for leak-free installations
- R&D and engineered in the USA
- GBrakes USA controls the manufacturing process, ensuring the highest level of quality control
GBrakes Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.
The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.
- Significantly improves response and feel over factory rubber lines
- Largest performance improvement for your money over any other braking upgrade
- Stainless steel hose resists abrasion and puncture
- Teflon core does not degrade over time like rubber lines
- PTFE Dupont 64 Teflon® hose
- Feature a heavy-duty stiffener sleeve and route just like the factory lines
- Proprietary, premium fittings
- Banjos utilizes a unique machined channel and sealing surface for leak-free installations
- R&D and engineered in the USA
- GBrakes USA controls the manufacturing process, ensuring the highest level of quality control
GBrakes Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.
The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.
- Significantly improves response and feel over factory rubber lines
- Largest performance improvement for your money over any other braking upgrade
- Stainless steel hose resists abrasion and puncture
- Teflon core does not degrade over time like rubber lines
- PTFE Dupont 64 Teflon® hose
- Feature a heavy-duty stiffener sleeve and route just like the factory lines
- Proprietary, premium fittings
- Banjos utilizes a unique machined channel and sealing surface for leak-free installations
- R&D and engineered in the USA
- GBrakes USA controls the manufacturing process, ensuring the highest level of quality control
GBrakes Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.
The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.
- Significantly improves response and feel over factory rubber lines
- Largest performance improvement for your money over any other braking upgrade
- Stainless steel hose resists abrasion and puncture
- Teflon core does not degrade over time like rubber lines
- PTFE Dupont 64 Teflon® hose
- Feature a heavy-duty stiffener sleeve and route just like the factory lines
- Proprietary, premium fittings
- Banjos utilizes a unique machined channel and sealing surface for leak-free installations
- R&D and engineered in the USA
- GBrakes USA controls the manufacturing process, ensuring the highest level of quality control
Pads
Engine
Clutch
Complete set of friction plates, HD springs and steel separator plates prevent premature driven plate wear, oil muddying and loss of stack height. Built with swaged aluminum carriers that spread the load on the clutch basket and prevent clutch basket "dogging". Anti-swell, alloy impregnated heavy-duty facings for smooth clutch action. Allows modulation, unlike paper clutches which tend to snatch. Don't forget to add a fresh gasket.
Cam
A pair of stage 2 intake and exhaust 'drop-in' camshafts. Great mid-range and top-end increase. Uses stock valve springs. Modifying the airbox and rejetting will be required to realize power improvements with these cams. These are new billet cams - No core return required!
The complete Thermo Control package - Our in-house designed Thermostat Bypass kit, a set of Custom Silicone Hoses and a Hi-Pressure Radiator Cap. All combined to help your KLR cooling system be at the top of its game. The Thermostat Bypass kit includes a thermostat with a higher temperature rating that will keep the motor more in its happy spot.
The Silicone hoses are stronger than the stock rubber units and will better resist cracking and leaking.
Drain Plug
GoldPlug is the gold standard in engine protection.
Stainless steel drain plug with an extremely strong magnet that picks up metal flakes in your oil.
14mm Thread
GoldPlug is the gold standard in engine protection.
Stainless steel drain plug with an extremely strong magnet that picks up metal flakes in your oil.
10MM Thread for frame drain.
Gasket
Oil Filter
Providing unbeatable performance and exceptional value, Hi-Flo Filter is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.
Grab our 5-pack and save both time and money!
Luggage, $25 and Under
Straps
ADV Sushi is a webbing reinforced velcro strap with integrated daisy loops. These are as handy as zip ties and duct tape. This is one of those products that you will use frequently if you have them with you.
A single strap was load tested at 200 pounds before it let go and a single strap held 50 pounds overnight with no issues.
Use this kit to build your custom solutions such as a fuel bottle holster, spare tube carrier, or use them to attach your bags to your Uprising Soft Rack. The possibilities are truly endless.
This Kit Includes:
- (4) 17.5" reinforced velcro straps.
Lighting
Tail Light, Mount
The Edge-2 Tail Light and License Plate Holder is a simple bolt-on replacement for the stock unit. Included is an aluminum mount for the light and license plate that is model specific. The light unit uses 16 high-intensity red LED's for tail/stop light function. 3 white LED's are used for license plate illumination. Included is a set of turn signal brackets that bolt to the mount. These are designed for a small signal with a 8mm mounting stud.
Turn Signal
Clear lens, amber LED type lights. Short flexible stems. Very small, only 2 7/8" long. Requires a LED turn signal flasher to flash properly. 4 Pack
Chemicals
Filling and bleeding a Magura hydraulic clutch does not need to be a routine chore and should only need to be done when air infiltration within the system is suspected. Magura uses mineral oil, which does not absorb moisture from the environment, to lubricate the whole system.
Note: Magura hydraulic systems use ONLY mineral oil. Do not introduce DOT brake fluid of any kind into a hydraulic system designed to use mineral oil as this will cause corrosion to the internal seals and system failure may result. The only time anyone should ever need to replace the hydraulic fluid in a Magura system is following a hydraulic line exchange, a system upgrade, a crash which has damaged the system components or in a situation where a lack of fluid within the system has been diagnosed by poor lever feel.
If you do need to bleed your Magura hydraulic system, their custom made kit does indeed make that chore easier.
Gasket
The best product for those surfaces that mate together without a gasket. Like center cases, cam covers and the like.
- Heat-resistant
- Tough, durable sealer utilizing silicone rubber as a primary component
- Ideal for applications where a long-lasting, faultless seal is absolutely critical
- 3.5 oz. tube
Exhaust, Luggage
Heat Shield, Accessories
Don't get burned! Giant Loop's ingeniously simple and effective exhaust shield protects bags and bodywork from heat damage. The Hot Springs Heat Shield helps avoid the meltdown, preventing bags and side panels from touching your bike's exhaust. It's the lightweight, universal heat problem-solver for virtually any motorcycle exhaust system. Backed by a Limited Lifetime Warranty.
Tires, Tools
Tire Tools, Wheel & Tire
No more fighting to keep the bead down while installing or repairing your off-road tires. The Bead Buddy holds the tire bead down in the drop center of the rim during tire changes making changes as easy as possible. Machined from tough 6000 series aluminum the Bead Buddy is light weight and compact enough for any tool pack. The Delrin securing thumb screw insures no scratches to your rims.
The Bead Buddy is NOT recommended for use with Bib Mousse tubes.
Motion Pro T-6 Combo Lever has a hex box wrench for your axle nut on one side and a perfectly contoured tire spoon on the other. Manaufactured from lightweight forged T-6 aluminum with a hard anodized finish. These beauties are just under 10 inches long and weigh only 3.5 oz. Available in a 12/13 combo unit and a 22, 24, 27 and 32mm hex ends.
Tire Tools, Wheel & Tire, Tubes
Chemicals, Exhaust, $25 and Under
Bearing & Seal Grease
A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing due to weathering or chemicals. Anti-Seize assures easier disassembly. Temperature range: -60°F to 1600°F (-50°C to 870°C). Salt, corrosion and moisture resistant – ideal for marine use. Meets Mil Spec #907E.
Gas Tanks
Accessories
If you're like us, you hate the long floppy vent hose hanging off the cap of your aftermarket tank.
This one-way vent cap replaces the long hose with a short one only about 2" long. It allows air into your tank but prevents fuel from sloshing out.
Machined from billet alloy and anodized for good looks.
Not for stock fuel tanks!
If you need a replacement cap for your Acerbis tank, why not go bling? These caps have a carbon fiber pattern molded into them that is extremely realistic. Looks like the real thing. Topping off the cap is a CNC Machined metal vent cap. This eliminates the need for a lengthy vent tube that gets in the way. The vent cap allows air to vent into the tank but does not allow fuel to splash out during normal use or during a tip over.
These caps fit Acerbis tanks only.
Get better range from your DR650 by adding an IMS 4.9 gallon fuel tank. Available in Natural, White, Black and Blue. Natural color is recommended if you wish to easily see the fuel level in the tank. Includes cap and fuel petcock.
More range at a great price.
The 3.6 gallon tank is for the off-road DRZ400 and DRZ400E.
The 3.9 gallon tank for the dual-sport DRZ400S. The 3.9 gal tank also fits the ES and SM models.
Both tanks are available in a selection of colors.
NOTE: Clarke tanks do not come with a vent hose or vent cap.
The new 4.1 gallon fuel tank from Clarke. Carries almost 2 more gallons than the stock tank. Available in Blue, Black, Silver, White or Natural
Petcock
A popular upgrade from the stock vacuum operated fuel valve. Manually operated. Must be shut off any time the bike is parked for more than a few hours. Fits stock tank or aftermarket tank and has both main and reserve. Fully rebuildable.
Suspension
Shock
Custom developed by BBR Motorsports for the ultimate upgrade for mini four-strokes. Sized perfectly for adult back-yard racing or fast/aggressive mini riders. This is the most important upgrade you can make for an adult sized rider. The stock suspension is too soft for most adults and aggressive kids. Fits stock DRZ125 shock.
- 30% stiffer than stock
- Preset and stress relieved for long life
- Custom wound from aircraft quality spring steel
- Powder coated finish
The correct spring rate for your weight will give a smoother more controlled ride. No more bottoming and better traction and confidence off-road. Kit includes required adapter collars
Stock Shock Spring 7.28 kg/mm
*Spring color may vary due to specification requirement and availability.
Race Tech HP Springs have a high stiffness-to-mass ratio. In other words; the springs are light weight for their particular spring rate. This requires the finest materials and processing. Shot-peened and pre-set so they cannot sack out. All Race Tech HP Springs have the highest rate tolerances in the industry. These are the finest springs in the world-guaranteed.
OEM spring rate is 6.7kg/mm. We offer stiffer spring rates for riders who wish to carry luggage or just prefer firmer suspension.
Race Tech shock springs require adapter collars which are included with your spring. *Spring color may vary due to specification requirement and availability.
Shock Spring | Qty 1 |
Spring Adapter Collar | Qty 2 |
Spring Adapter Collar 2 | Qty 1 |
8.0 kg/mm is 24% stiffer than stock
Lowering Link
Forks
Seats
Complete Seat
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Width: | 9" (229mm) |
Height: | Same as OEM |
State-of-the-art replacement seats, Sargent seats are built on a percision-molded lightweight Polytec seat pan. Sargent's proprietary seat foam (Super Cell Atomic Foam) is their own unique blend of resilience, firmness, and vibration-absorption qualities, making it well suited for long distance comfort and support. Sargent seats are covered in a marine-grade, UV-stablized mildew resistant CarbonFX vinyl. Available in standard height and 1" lower than stock. These seats will fit bikes with the stock, IMS, or any other aftermarket fuel tank.
Width: | 11" (279mm) |
Height: | Same as OEM |
Drivetrain
Sprocket
Chain Guide
Fuel and Intake
Jet Kit
Geared for the do-it-yourselfer that already has a TM40 or HS40. This kit supplies everything you need to convert it for use on your bike.
Kit includes intake and air boot adapters, throttle cables, choke knob, accelerator pump nozzle, a wide selection of main and pilot jets plus a TM40 tuning manual.
This kit includes 2 Needles that have been developed by JD Jetting and manufactured for them to their exacting specifications. These two needles allow a wide range of tuning possibilities and provide correct fuel delivery at any throttle position.
4 allen type screws for the float bowl are also enclosed should you strip out the stock screws during your tuning process. Complete instructions with photos, jetting suggestions for different set-ups and situations, 5 Main Jets and a drill bit complete the package.
Air Filter
Twin Air's high quality materials and superior construction deliver unbeatable performance and protection. The hands-down choice of more World and National Champions than all other filters combined.
Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles-without restricting airflow.
Carburetor Repair Kit
Has your TM40 carburetor been sitting for too long and now needs to be rebuilt? Then what you need is this TM40 Rebuild Kit that contains Genuine Mikuni replacement parts.
This kit includes:
- Needle Clip and Washer
- Top Cover Gasket
- A/P Nozzle O-Ring, Plug and Rubber Cap
- Fuel Screw O-Ring, Washer and Spring
- Float Bowl O-Ring
- Pilot Fuel Screw
- Drain Plug O-Ring
- #3.8 Needle Valve Assembly
- O-Ring for the Starter Circuit and Needle Valve
- New Screws for the Float Bowl
- Vent Hose
Here is the O-Ring that fits in the carburetor manifold. This is the manifold that holds the carb up to the cylinder head. The O-Ring mounts between this manifold and the cylinder head. When this O-Ring fails it allows air into your cylinder and makes your Air Fuel ratio too lean which causes the engine to run too hot.
Tools
General
Repair Manuals
Engine, Tools, $25 and Under
Engine & Maintenance
Drivetrain, Tools, $25 and Under
Chain, Drivetrain
- Accurately and quickly measures chain slack
- Two scales measure both chain slack and chain to swingarm clearance
- Setting chain slack properly dramatically improves chain life
- Lightweight compact design fits easily in your tool box or road kit
- Works on most street and dirt bike applications up to 75mm chain slack
- Made from engineered nylon with aluminum measuring scale
- Anodized laser-etched precision measuring scale
- Refer to your owner's manual for proper chain slack and procedure
- Patent pending
Featured Products, Lighting
Headlight
Good News: There’s finally a plug & play LED headlight conversion kit for your 2008-2020 WR250R and WR250X!
This kit includes a sealed LED headlight assembly with plug & play electrical connection, adjustable powder coated steel mounting bracket set, and mounting hardware.
Installation is a five minute, one beer exercise. If you can change a residential light bulb you will have no problem installing this conversion kit. We promise.
Please note that you will need to reuse your OEM upper headlight mounting grommet and two aim adjustment springs. Or add new ones to freshen up your whole headlight unit.
Low Beam: 2,100 Lumens, 20 Watts
High Beam: 2,800 Lumens, 30 Watts
Operating Voltage: 10V-30V DC
Color Temp: 6,000K
Lifespan: >50,000 hours
Brakes, $25 and Under
Rotor Bolts
Engine, Tools
Repair Manuals
Frame
Side Stand
A must have for lowered bikes.
- Special Feature: Bigger kickstand shoe.
- Extends approx. Stock length and shortens up to 4" for the DRZ400S
- Extends approx. 1.5" longer than stock and shortens up to 2.5" for the DRZ400SM
- Material: Steel tubing with black powder coated finish for strength and durability
Footpegs
The IMS Super Stock pegs are the perfect choice for both the daily commuter and the rider-in-training. Their mellow tooth design keeps you planted while preventing wear on your soles. They are also perfect for young riders who don't need or want a more aggressive option.
Wider foot pegs for sure-footed comfort.
17-4 cast stainless steel.
Width | 1.97" |
Length | 3.18" |
Body
Front Fender
Replacement front fender by Maier that will fit great on your TW200.
- All Maier bodywork is made of tough, vacuum-formed high-gloss polypropylene
- Drilling is required
- Colors are OE color matched
Note: The proper way to install this front is to install the stock fender bracket to the under side of new Maier front fender using stock screws and nuts.
Wheels
Bearings
Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.
Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.
Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.
Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.
Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.
The rubber coated outside diameter creates an optimum seal at the hub.
Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.
Description | QTY per Kit |
Ball Bearing | 2 |
Seal | 2 |