- Sintered Pads are best for regular riding. Long life, and good performance in all conditions
- Sport Carbon pads are made for fast riding in dry conditions. Not recommended for mud, water, or sand
- Race Sintered pads are high performance race pad with superb durability similar to that of the sintered pad. Higher friction level and fade resistance. Diamond ground surface finish to speed bed-in. Comes with new pad pins. Race Sintered are designed for racing use only; not for street use
Brakes
Pads
Sport Carbon pads:
- Carbon graphite "X" pads blended with Aramid for leisure/sport use
- Low heat generation
- Best for fast, dry riding; not for mud, water, or sand
- Offroad, Semi-sintered metal
Sintered Pads:
- The perfect brake pads for leisure use
- Offer maximum durability and excellent braking performance
- Constructed of U.S.-made sintered bronze for longest lifetime
- Best for riding in water, mud, dust, or sand
Race Sintered:
- High performance race pad with superb durability similar to that of the sintered pad.
- Higher friction level and fade resistance
- Diamond ground surface finish to speed bed-in
- Comes with new pad pins
- Race Sintered are designed for racing use only; not for street use
Includes front and rear brake pads
- Sintered Pads are best for regular riding. Long life, and good performance in all conditions
- Sport Carbon pads are made for fast riding in dry conditions. Not recommended for mud, water, or sand
- Race Sintered are designed for racing use only; not for street use
Includes front and rear brake pads.
- Front pads: Sintered Pads are best for regular riding. Long life, and good performance in all conditions
- Rear shoes: Organic brake pads contain man-made high-performance fibers that are used for their light weight, high strength abrasion resistance and thermal stability.
Rotor
SMX Carbon Look Rotor
- Rotor material has higher friction than plain stainless steel for added stopping power
- Rotors measure 320mm
- Come with caliper relocation bracket
- Designed to fit standard hubs
Caliper Rebuild Kit
Engine
Oil Filter
Gasket
The idler gear is one of the few plastic components in the DR650 that can significantly impact engine performance if it fails or breaks.
This gear is crucial for driving the oil pump, which ensures proper oil circulation throughout the engine. In the absence of this component, complete engine failure may occur. While the idler gear is not frequently cited as a common failure point in the DR650 engine, failures have been reported, typically manifesting as either a fractured gear or stripped teeth.
During inspection, it is essential to check for any cracks, chipped areas, or missing teeth on the idler gear. Replacing the gear is a straightforward procedure, and it is advisable to do so while the clutch side case cover is already removed for other maintenance tasks, such as NSU screw replacements or clutch hub bushing replacements.
This component is a Genuine Suzuki part.
Clutch
Designed to improve the life and durability of your clutch, Barnett's "Dirt Digger" provides better rideability with less slippage compared to stock.
- Carbon fiber friction plates
- Tempered steel drive plates go through a vibratory de-burring process and then are quality checked for flatness to provide optimum performance.
- Heavy duty clutch springs are pre-set, shot-peened, and heat treated for performance and durability.
The EBC DRC kit is the best way to reset your bike’s clutch to the exact as new standard sizing. Replacing just the plates can work but new clutch springs are always better and springs get tired and can cause slippage plus the separator steel plates from EBC are pin-planished, forming tiny indents in the steel which improves the spread of oil around the clutch surfaces.
Includes:
- Friction plates with EBC unique alloy article impregnated clutch facings that wear longer and resists burning.
- Pin planished steel intermediate plates.
- New 10-15% uprated heavy-duty Clutch springs.
Cam
Controls
Bar Risers
This unique design from Rox allows you to move your bars either closer (1" up and back) or further away (1" forward and 1-1/4" up) depending on rider preference. These risers have an oblong mounting hole so that they will fit virtually any triple clamp with 8mm bolts. A set of reducers lock into the risers ensuring no slippage whether you have a 7/8" or 1-1/8" bars.
Because these are offset there may be limited clearance between the gas tank and the risers when the bars are fully turned on some models, mainly when mounted to move the bars closer.
Introducing the Zeta solid bushings to replace your worn out rubber bushings. We have tested these bushings on our own bike and we love them. No more sloppy handle bars. Plus, they add a little bling factor to your bike! Simply unbolt your bar mounts and swap the rubber bushings with these anodized billet bushings for a more stable handlebar feel.
Features:
- Solid cones for rubber bar mounted stock triple top clamps
- Provides direct control and prevents bar twist when falling down
- Comes in a set of 4 solid cones
- Made of A7009-T6 aluminum
Levers
Brakes, $25 and Under
Rotor Bolts
Tires
Tubes
Standard Duty tubes are made with seamless construction from natural rubber with heavy duty valves. Great replacements for stock tubes and perfect as spares to carry on your bike.
- 17" tube works with 110/90, 120/80, 120/90 (4.00 to 4.25) tires
- 18" X 3.75 tube works with 110/90, 120/80, 120/90 (3.75 to 4.25) tires
- 18" X 5.10 tube works with 110/90, 120/90, 130/80, 130/90 (4.00 to 5.10) tires
- 19" tube works with 100/90, 110/90 (3.60 to 4.10) tires
- 21" tube works with 90/90, 90/100 (2.75 to 3.00) tires
Don't forget a Rim Strip. New tubes deserve new rim strips.
Our Heavy-Duty tubes are made specifically for off-road riding. These are the sturdiest, highest quality tubes on the market. They are 3mm thick with natural rubber construction to better resist pinch flats and are easier to patch than butyl rubber tubes. These have a straight metal valve stem. New tubes deserve new rim strips. Don't forget to add them in to your order.
- 17" tube works with 120,130 and 140 metric tires or 4.50 to 5.10 inch size tires
- 18" tube works with 100 to 130 metric or 4.00 to 5.10 inch size tires
- 19" tube works with 100 to110 metric or 4.00 to 4.60 inch size tires
- 21" tube works with 80 to 100 metric or 3.00 to 3.50 inch size tires
Supermoto
From Shinko Tire, the 705 Series are DOT approved Dual Sport tires designed for 75% street and 25% trail riding. This aggressive tread pattern provides excellent wet and dry weather adhesion.
Note: Tires in the dropdown menu with an -R behind them indicate Radial Tires.
Dual-Sport
- Long mileage, serious traction and smooth transition from pavement to gravel to dirt, the GPS does it all.
- Reversible rear to suit the rider’s needs – either 50/50 or Mostly Off-Road.
- In 50/50 direction the GPS is a well behaved street-able tire with smooth cornering transition from center to cranked all the way over.
- In Mostly Off-Road direction the aggressive straight line hook-up and cornering drive is engaged for better off-road traction.
- Stronger carcass construction than other 50/50 adventure tires provides world class performance with a high resistance to punctures
- Deeper tread than most adventure tires.
- Unique Hybrid compound with Silica for long mileage and optimum grip in mud and snow.
NOTE: Tubes can be run in Tubeless (TL) tires.
Wheels, Tools
Wheel & Tire
A professional level adjustable spoke torque wrench. Range from 0 to 62 inch pounds. The handle has a rubber coated end to protect your rims from scratches. Includes Torque wrench, standard handle (for tough disassembly work) and seven different size tips, all packed in a protective case.
Includes Tips 5.1, 5.6, 5.8, 6.1, 6.3, 6.5, 6.7, 6.8, 6.9 and Spline drive.
Featured Products, Frame
Side Stand
Revolutionize your riding experience with Swiftkicker.
An adjustable kickstand for your motorcycle. Swiftkicker is built for offroad motorcycles, dual sports, and dirt bikes. Designed with the idea in mind that motorcycles should be able to take you anywhere, the Swiftkicker motorcycle kickstands help you do just that. You can set the length to anywhere in a six inch range of travel so you can stop anywhere without having to worry about having an even surface to park.
With just a flick of your toe, you can adjust the kickstand to the desired height, park your motorcycle, and be on your way.
No longer will you have to search for a rock or piece of wood to prop your motorcycle up with, or even worse, coming back to your bike to find it has tipped over from unstable ground.
The Swiftkicker is 100% manufactured in the USA from the highest quality components.
The billet 6061 head and the hard anodized tube are significantly stronger than the stock stand. An oversized foot will assure that the end of your stand stays where it belongs, rather than eight inches underground with your bike lying on top of it. The design is trail proven in the harshest possible conditions. Because nothing is indestructible, any of the kickstand components are replaceable at a lower cost than purchasing an OEM kickstand.
Measured from the center of the pivot to the bottom of the foot.
- Standard length travel range is 13.5"-19.5" (the middle of the travel is approximately the same length as the stock stand)
Drivetrain
Chain Guide
Sprocket
Quality steel rear sprockets. Choose 525 or 520. 41T to 50T
48 and 50 sprockets require removal or modification of your lower chain guide.
Chain Size Recommendations:
- 110 link chain for a 42 tooth rear sprocket
- 112 link chain for a 46 tooth sprocket
- 120 link for the 48 and above sprockets.
- 120 link chain will have to be cut to the proper size for the 48 and 50.
*Actual sprocket color may differ from image shown.
Exhaust
Spark Arrestor
This Quiet Insert comes stock in all new FMF Q4 mufflers. If you lost yours, this is the replacement you need.
It will fit Q4, Q4 Hex, Powercore and Powercore Hex mufflers.
It will reduce the sound rating of the Power Core models, from about 99db down to about 96db.
Please choose the correct Insert for your muffler. If you are unsure of the year that your muffler was manufactured you can easily identify visually which insert you will need.
Pre '21 | Installs using one small screw |
'21-Cur | Installs using a spiral retaining ring |
Headpipe
Our very own high flowing head-pipe is made in the USA using a CNC (computer numerically controlled) mandrel bender for an absolute perfect fit. It is a high quality 2-piece 18 gauge stainless steel head-pipe with 1 3/4" outer diameter, compared to the stock outer diameter of 1 1/2".
The SS Pro-Flow is a tested upgrade over stock that will bolt right on with no modifications needed. It is compatible with any combination muffler/mid-pipe, as well as all motor configurations of the DR650 '96-current.
Includes a stainless steel band clamp for the mid-pipe joint, clamp-on heat shield mounts, to use with stock heat heat shield and a stainless steel flange at the exhaust port mount. We recommend a new exhaust gasket when installing your new SS Pro-Flow.
Bradley performance bomb header for TW200.
By positioning this “Bomb” at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. The result is a flow increase of nearly 10%.
The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity.
Fits all years of TW200 and works with all other brands of mufflers. Stainless steel and nickel plated. A clamp-on shield can be added, sold separately.
The PowerBomb header promotes better flow by allowing a small expansion of the exhaust gasses. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels. Includes clamp-on mounts for the stock heat shield. We recommend Anti-Seize on exhaust fasteners.
Muffler
X3 EVO represents the off-road evolution: LeoVince has combined all its experience in the off-road world with cutting-edge materials and Italian design, enhancing freedom in its purest form.
The X3 EVO body is made of AISI 304 stainless steel with TIG welds handcrafted by specialized operators, to guarantee long-lasting performance. X3 EVO will allow you to face the most extreme environments and conditions because it does not fear water or mud, nor wear over time.
The LV logo is their tribute to a motorcycle culture that we have loved for 70 years and is laser etched on the body of the exhaust: it is as endless as their passion.
They manufacture the end cap in 100% real carbon, with their special 2x2 twill carbon fiber, specifically designed to resist high temperatures and make the X3 EVO even lighter.
The matte clear coating, in addition to enhancing the carbon texture, protects the end cap from wear and UV rays, keeping the X3 EVO always in a perfect shape.
The sound of X3 EVO is already unmistakable at low revs. X3 EVO has a direct interior, specially conceived to channel the exhaust gas in an optimal way, to unleash a deep sound, giving a new voice to your bike.
The X3 EVO's Spark arrester has been tested and approved by the United States Forest Service and is essential for off-road riding in compliance with regulations, with more peace of mind, more respect for the environment and more fun.
Full System
Buy both and save. Includes the FMF Q4 and FMF headpipe
- The Q4 employs intricate chambers, baffles and proprietary multistage packing material making it the best performing quiet muffler available
- Constructed from aircraft grade aluminum and high strength stainless steel
- Sound rating 96dB
Suspension
Lowering Link
By simply replacing a motorcycle's stock shock linkage with a longer, stronger and lighter DeVol Lowering Linkage, a bike's seat height will be dramatically lower to help give those riders with shorter inseams a more confident and enjoyable ride.
- High-grade U.S. billet aluminum
- Longer linkage dramatically lowers seat height
- Hard anodized finish
- Applicable models include bearings/seals
- Step-by-step instructions
- Available for most dirt and some dual sport models
- 100% Made in the U.S.A.
The DeVol Lowering Linkage is not recommended for aggressive riders or jumping. If you need a linkage to enhance the performance of your bike's suspension, the DeVol Transformer Pull-Rod is exactly what you are looking for.
Fork Cartridge Dampers
- Race Tech's original bolt-on fork valving system for front cartridge forks
- Triple the flow area of stock pistons
- Put valving control on the shim stack
- Outstanding tunability; improved control, traction, plushness and bottoming resistance
- Complete instructions, Gold Valve pistons, valving charts, valving shims and "Technical Edge
- Fork Maintenance and Gold Valve Installation" video all included
Fork Seals & Bushings
Patented fork seal features a balanced 3 lip design that evenly distributes the pressure reducing operating temperature, wear and friction
Custom Elastomer Fork Seals have been tested to outlast OEM fork seals. Extends typical seal life by 3 to 5 times over OEM seals
Stiction (friction) measures from 1/3 to 1/2 less than OEM seals for smoother fork action
Lower Stiction, Longer Life! It doesn’t get any better than this!
Plus, the only complete line of dust wipers! Wipers should be replaced with the fork seals to assure peak performance.
Kit includes Fork Seals and dust wipers.
- Seal profile is engineered to create equal pressure in each seal lip; equalized seal pressure creates less drag and longer seal life
- Patented MAX-LIFE has a coefficient of friction up to 3 times less than the OEM seal material
- Triple-lip seal design
- Dyno-tested to last 3 to 4 times longer than OEM seals
- Directional ribs allow seal to be installed easily
- Kit includes fork seals and dust wipers
Armor - Bike Protection, Drivetrain
Chain Guard, Chain
Give your Honda the ultimate protection with B&B Off Road’s heavy-duty chain guard. This premium upgrade replaces the stock plastic guard, notorious for bending and breaking on tough terrain.
Crafted for Unrelenting Performance:
Precision-machined from robust 2.5mm marine-grade aluminium, this chain guard delivers unparalleled strength and durability. Say goodbye to worries about trail debris or rogue rocks damaging your chain – this guard stands strong against anything you throw at it.
Lightweight Design, Maximum Protection:
Despite its impressive strength, the chain guard is engineered to be lightweight, minimising any additional weight on your bike. This meticulous design ensures optimal performance without sacrificing protection.
A Perfect Fit:
This B&B Off Road chain guard seamlessly integrates with your Honda CRF, eliminating any installation hassles. The precise CNC machining guarantees a perfect fit for each compatible model.
Invest in Peace of Mind:
Protect your chain, a vital component of your motorcycle’s drivetrain. By preventing damage from debris and impacts, this chain guard minimises the risk of breakdowns and costly repairs. Hit the trails with confidence, knowing your CRF is shielded for the long haul.
Lighting
Tail Light, Mount
Remove the bulky stock number plate holder with our slim design- comes with LED number plate light.
- Quick and easy install
- Mounting hardware supplied
- Comes with clear LED tail, brake & number plate light
- No mods required for installation
- Available in polished or black PPA coating.
- Pre drilled to suit Australian licence plate
*Please Note: Brake light does not come with necessary/factory connectors. Some cutting, crimping, soldering of wires may be required for connection.
Lose that ugly stock taillight and license plate bracket and install this tidy one from ProCycle. We designed this unit and have it manufactured here in Oregon. Kit includes a LED taillight / brake light unit as well as compact turn signals. We also include splice connectors and split tubing, everything you need for this installation.
There is also an option to include matching front turn signals with side mount brackets that allow you to replace the clunky front signals with the same style as the rear in this kit.
Clean up the backside of your TW200 and upgrade to a brighter, safer LED taillight in one go!
The Tidy Taillight Kit includes a durable, high-quality steel mounting bracket that mounts under your rear fending using the existing bolts. The bracket also has slots to mount your license plate.
The included LED taillight helps make your TW more noticeable to other drivers at night, and the super-bright LED brake lights activate more quickly than stock incandescent bulbs when you get on the brakes, giving drivers behind you more reaction time. The taillight unit also features white LEDs on the underside to light up your license plate and keep you legal.
Turn Signal
Tail Light
Taillight & brake light. Attaches to the top side of enduro style (XR, KDX, etc) rear fenders. Dimensions: 2 3/8" x 4 3/4" x 1 3/4" tall. This light is a popular replacement for the gigantic stock XR650L taillight. Functions as taillight and brake light. Fits perfectly into the taillight pocket on the XR650L. Please note that this no longer has a window for a license plate light.
Luggage
Luggage Racks
The Honda Maxi Luggage Rack and extension is made from 5mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.
DIMENSIONS
Maxi Plate:
- Total Length: Approx 55cm / Centre Surface: Approx 50cm
- Total Width: Extension Plate Approx 46cm / Mini Plate: Approx 33cm
Will not fit adventure sports model. Please see other listing.
Straps
These are high-quality straps made by Givi. They have a nylon belt with an anti-slip metal safety buckle. The long strap is 67" long by 1" wide with a 100 kg maximum traction load. The short straps are 39" long by 3/4" wide with a 75 kg maximum traction load.
Size: 25mm-1700mm
Fender Bags
- Made with Industry leading UltraMax® fabric
- Maximum UV protection against fading
- Heavy duty webbing and buckles for easy and secure mounting
- Fully expandable (Dual Sport/Enduro & Adventure only) with reflective piping
- Rigid construction allows the bag to hold its shape when empty
- Water resistant lockable zippers help keep out dust and dirt
- Inner self-fastening straps to better secure contents
- MOLLE panel on lid allows other items to be strapped down
- Rubberized carry handle for easy transport
Lite:
- Dimensions: 9.75” L x 8.5” W x 4” H - Holds 5.5 Liters
- Expanded: DOES NOT EXPAND
Fuel and Intake
Jet Kit
Designed for use with stock engines using either stock or aftermarket exhaust and air filters.
- Provides a simple and affordable solution to carburetor tuning problems
- Allows you to tune your bike for increased power and smoothness while retaining fuel economy
- Includes a guide booklet on how to install and use your jet kit to it's full potential
Designed for use with stock engines using either stock or aftermarket exhaust and air filters.
- Provides a simple and affordable solution to carburetor tuning problems
- Allows you to tune your bike for increased power and smoothness while retaining fuel economy
- Includes a guide booklet on how to install and use your jet kit to its full potential
Air Filter
- Designed to fit in the factory air box exactly like original filter
- The best selling replacement air filter for competition motorcycles and ATVs
- Unique two stage design allows for easy and complete cleaning
- Dual layer of foam, can be serviced separately
- Thin Ultra Seal base is virtually impossible to tear and has a built-in "Grease Groove"
- These bands are the visible part of two fiber reinforced nylon injection moldings which form the structure on which the unique Tri-Foam filter system is bonded.
- The two outer layers of foam provide optimum filtration and load-up capacity while the inner layer is made of special self extinguishing filter foam.
- Together, they give the best combination for air flow, engine protection and safety.
This is ONLY a replacement filter for the ProCycle ITG kit and is not a direct swap for OEM.
This seal helps keep debris and water out of your DR650 air box and it may become damaged or missing over the years. It is an important part of your DR650's intake system to maintain & prolong air filter life.
Simply, remove the air box door, then remove the old seal and clean out the track it sat in. Set the new seal in place and cut off any excess material remaining. Install the air box door and you are done.
Carburetor Repair Kit
Genuine FCR-MX Carburetor Rebuild Kit
Not for the stock BST DR650 carburetor, Fits FCR-MX conversions Only
This Kit replaces vital components in the BST40 Carburetor including new a Float, Needle Valve, Gaskets, Seals, Diaphragm, Spring and Float Bowl Screws to return the stock Mikuni BST40 Carburetor to like-new operation. As a bonus we have included Viton o-rings for the float assembly and 4 stainless steel allen screws.
Carburetor
Engine, Tools
Repair Manuals
Clymer repair manuals provides step-by-step procedures based upon the complete disassembly of the motorcycle. This hands-on experience combined with extensive research results in a manual that is both user-friendly and detailed. Contains hundreds of original photos, exploded views, drawings, specifications and charts to illustrate each job. Also features shortcut repairs and high-performance modifications.
Whether you're interested in routine maintenance tasks, troubleshooting, or more extensive repairs, the in-depth coverage provides indispensable information about your KLR650.
Clutch, Engine & Maintenance
Need to remove your clutch assembly to get at that dreaded neutral safety switch? This holder is the quickest and easiest tool out there to get a grip on that hard to handle hub. Laser cut to the exact pattern that EBC makes their clutch plates from, it makes loosening and re-tightening the clutch nut easy. All of that and no worries about doing any damage to your expensive clutch hub.
Bottom line, if you have to hold your clutch hub to remove it, there is no better way to do it.
Tires, Tools
Tire Tools, Wheel & Tire
These Rider's Wrenches by Fredette are combination wrenches that have three wrenches in one! A 2-stroke size spark plug wrench - a front axle and a rear axle wrench. Yep, all three in one unit.
Available in the combinations shown that will fit virtually all current dual-sport machines.
Electrical
CDI
This box moves up the rev limiter allowing higher revs. It also has a hotter advance curve from the OEM box. This allows for a bit crisper throttle response and easier starting. This is a "must have" for modified KLX110's.
- Raises rev-limiter 1200 rpm over the OEM ignition
- Hotter advance curve for better performance
- Direct replacement for the OEM CDI ignition box
Stators, Lighting & High Output
Battery Chargers
Liquidation Deals
Clearance
K&L® shims exceed the maximum of the Apparent Rockwell Hardness "C" scale. Shims average 47.0 compared to the 46.0 maximum.
These kits fit multiple brands and models, please verify correct size for your model before purchase.
13mm diameter - Includes two valve shims of each size 2.30, 2.40, 2.50, 2.55, 2.60, 2.70, 2.80, 2.90, 3.00 and 3.10. In a shim box.
20 shims in total. From K&L.
KAWASAKI
This boot goes way beyond our expectations in comfort, protection, quality and affordability!
- Mid-height design
- Full-grain Oiled Leather upper
- DRYTEX lining (Waterproof/Breathable)
- Unbreakable GH plastic buckles
- Ankle TPU internal moulded plastic protection
- Special nylon mid-sole with steel shank
- Anti-bacterial replaceable footbed with APS
- Adventure double density anti slip/rubber sole
- See ADVmoto Magazine's review of this boot below.
LIMITED SUPPLY
Blemished
Minor scuffs on top from shipping damage that does not affect function or fitment, only visible up close. Available in black only. Comes with original packaging and all hardware. Sold as is.
This DRZ400 rear rack, hand-built by B&B Engineering in Australia is made from 4mm aluminium 5083 plate tig welded to the support tubing circumventing the plate. This material was chosen because of its extreme suitability for welding as well as abrasion and impact resistance, and all of this keeping in mind the full weight of the bike and rider. Once complete they are given a polished finish or coated with a super-durable black polymer. All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.
These racks are smooth and sturdy enough to use as a grab handle.
Check out the bolt-on Luggage Plate for the B&B Rack for those times you need to carry a larger load!
*Black front fender with various superficial scratches on the top of the fender. Sold as is.
Front fender from DSA Concepts Plastics is shaped very much like the OEM DRZ400SM front fender. Big enough to be functional without wind-steering the bike like the stock fender does. Vacuum molded, these are a design improvement over stock. These are fully compatible in any combination with the original factory plastic.
Communications & Nav, Liquidation Deals
Map, Clearance
Benchmark’s Folded Recreation Maps were created for outdoor lovers who want the high quality recreation information in our atlases but with the convenience of a traditional folding map. Complete public lands detail and hunting unit boundaries are shown as well as categorized recreation listings.
Limited to stock on hand
Brakes, Liquidation Deals
Rotor, Clearance
Contour rotors are ultra lightweight OEM replacement rotors made with tough and durable stainless steel. Heat treated to perfection and then diamond ground to micron accurate surface finish and parallelism and will deliver great brakes that will perform and last.
Front Rotor, Limited stock
Fuel and Intake, Liquidation Deals
Clearance
Boyesen Pro Series dual-stage reeds combine a carbon-fiber top reed with a fiberglass bottom reed for unrivaled performance. The Pro Series Reeds are more responsive than our traditional Power Reeds. The carbon-fiber top reed has excellent response characteristics that provides even quicker acceleration, stronger throttle response, and more over-rev than our standard Power Reeds. The fiberglass bottom reed provides stability and longer reed life.
Drivetrain, Liquidation Deals
Sprocket, Clearance
Tools, Liquidation Deals
Stands, Clearance
Use simple leverage to easily lift your dirt bike up on to a flat platform.
The platform angle adjusts easily so either wheel can be off the ground quickly and safely for work or cleaning. These adjustments can be made with the bike on the stand.
Folds up for easy storage and transport.
Adjustable legs for use on any terrain and allows for even lift height for any dirt bike.
Closeout item, as is, no warranty.
Armor - Bike Protection
Handguard
To fit tapered 28.5mm (1 1/8") handlebar.
- Barkbusters strongest handguard EVER!
- Designed for Enduro and Trail bikes.
- Two mounting points secure the full wrap around aluminum design.
- Compact curved profile to protect hands and levers during intense trail and tight bush riding.
- Heat treated aluminum backbone for maximum strength.
- Replaceable, high impact resistant EGO plastic guards included.
- Large range of colors matched to popular motorcycle brands.
- Deflectors available for increased protection (sold separate).
- Easy installation.
- Note: Not ideal for bikes with long clutch and brake levers.
NOTE: will not fit Renthal Twin Wall or Barkbusters VSBar.
Brake Guard
B&B Off roads Ktm 950 and 990 adventurer master cylinder guard is made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All guards are supplied with all necessary mountings and stainless bolts. Made to cover and protects the rear brake master cylinder it looks great and is easy to install. Comes with polished finished.
Frame
Footpegs
The IMS Super Stock pegs are the perfect choice for both the daily commuter and the rider-in-training. Their mellow tooth design keeps you planted while preventing wear on your soles. They are also perfect for young riders who don't need or want a more aggressive option.
Wider foot pegs for sure-footed comfort.
17-4 cast stainless steel.
Width | 1.97" |
Length | 3.18" |
Center Stand
T-Rex stands are made from steel tubing finished in black powder for durability. Back by a 3-Year limited warranty for any material or manufacturing defects. Rest assured that you are getting best material commercially available.
Greatly eases basic chain maintenance, tire changes, parking, cleaning, etc. All necessary hardware is included. Installs using basic hand tools.
Armor - Bike Protection, $25 and Under
Headlight Guard
Made of military aircraft grade 3/16" cast acrylic, this guard will protect your lens from roost, rocks and branches. Optical clarity of the acrylic ensures brightness and projection of your headlight are minimally effected while all the while protecting your headlight from impact and abrasion.
Guards are held to the headlight lens with an industrial strength hook and loop system on each corner.
Featured Products, Controls
Levers
- Warp 9 Flex Levers are machined Billet, anodized and hinged brake levers with CNC machined master cylinder interfaces
- Adjustable reach allows customization to the rider’s hand size
- Double hinge design allows lever to flex out of the way in most impact situations
- Pushrod or Bearing contact styles for smooth brake modulation
- Titanium Pivot / Black levers with laser-etched Warp 9 logo CNC Billet Brake pedal
- Will not fit with the stock OEM wind deflectors.
Tools
General
Featured Products, Electrical
ProCycle Dashboard designed to power multiple electronic devices. It can also be used for accessory lights, heated grips or gear, whatever you like. You can also use the two pre-drilled holes to attach a RAM mount and place your phone or GPS unit on that while charging.
The dash panel is manufactured from mild steel and powder coated black. Also included are 2 weather resistant green LED rocker switches, and a voltmeter with two 4.2 amp weather resistant USB ports, a wiring harness with a built in 10 amp fuse/holder, and complete instructions. Everything you need to mount it and connect the outlets back to the battery.
Drivetrain, Tools
Chain
Body
License Plate
Have you already ditched the bulky tail light on your XR? Don't want to bend your license plate and wrap it around your rear fender? Here is a great solution to clean up the looks of the backside of your XR650L. If you haven't already upgraded to the smaller and better looking WPS Tail light, select 'Bracket & Light' from the menu and you will get the WPS Taillight AND the License Plate Holder.
Please note that this no longer has a window for a license plate light. To stay legal, you can mount one or two License Plate Lights to your plate holder, or you can check out the LED License Plate Frame.
Windscreen
The Bajaworx Dakar Clear windshield for the KLR650 is designed to direct the wind over even the tallest of riders without compromising visibility. Decreased wind noise, reduced buffeting and more control in strong crosswinds make this a fantastic addition to your newer KLR.
- Constructed using 3mm aerospace grade polycarbonate
- Sturdy and rigid, will not rattle or vibrate when riding off-road
- Opens up dashboard area by over 50%
- Available in clear only
- Uses stock mounting holes, new mounting hardware included.
- Trimming of the stock fairing recommended (refer to installation instructions for more information)
Rear Fender
Drivetrain, Wheels
Chemicals
Controls, $25 and Under
Grips
Each pattern is available in three advanced synthetic rubber compounds. This means you can have the optimum combination of strength, tackiness and shock absorption to suit every riding condition and individual style. Soft grip is extremely soft, giving you a very comfortable ride, great feel and reduces the chance of blisters; however, because the grip is so soft, it wears quickly. Medium is a compromise between firm and soft. Firm grip has the same feel as a stock grip, it is very strong and has very good resistance to tearing and abrasion. Half Waffle has waffle pattern in finger area for traction and diamond pattern on palm side to reduce blisters. Full Waffle: designed after the CR Honda® grip.
Featured Products, Lighting
Headlight
This plug-n-play kit includes sealed LED headlight assembly and adjustable mounting brackets specifically designed for the 2008-2018 Yamaha XT250. The new design for the black headlight produces more light and has much more uniform beam pattern when compared to the previous version. New design currently only available in black, chrome may be available in the near future. No wiring, soldering, resistors, trimming, drilling, or fabrication required.
- Low Beam: 20W, 3,600 Lumens
- High Beam: 40W, 4,500 Lumens
- Color Temperature: 6,500k
- CREE LED Chips
- DOT & SAE Approved
- CE, RoHS, ISO9002, IP67