Voting is now open for the 2025 calendar photo contest. Click here to vote for your favorite!
Moose Race Fit Radiator Hose Kit
- Manufactured by Samco® Sport UK – the world leader in silicone hose, with over 20 years experience
- Hand wrapped and 100% visually inspected in the UK
- European grade hi-temperature silicone guaranteed to 356°F
- Smooth flow and improved insulation promotes radiator efficiency and improves engine cooling
- Single-molded, Y-piece hoses eliminate the need to reuse OEM 3-way fitting, which reduces weight and eliminates leak points
- Single-molded, T-piece hoses eliminate vulnerable threaded leak points and reduce weight
- Three layers of reinforcement fabric offer high burst pressures and provide better debris/crash resistance
- Zero block tooling technology results in clear and open hose junctions, free from dangerous and restrictive flashing
- Used by leading MX/Enduro and Off-road racing teams
- UV-stable colors don’t fade with heat or sun and are color matched to OEM brands
- Clamps made from 18/8 marine-grade 100% stainless steel have rounded edges that prevent the clip from cutting into the hose and a non-perforated band prevents clip from biting into the hose
- Kit contains hoses and necessary clamps
Here are the O-Rings you need when you perform an oil change. The largest one and the smallest one go inside the oil filter housing cover. The second largest one goes on your oil drain plug. The second smallest one goes on your oil fill plug. Replacing these O-Rings regularly will help keep your engine from seeping oil.
Africa Twin with DTC
- In addition to the main oil filter, bikes with DTC have an additional oil filter in the clutch circuit
- Constructed using the best materials available
- With the experience of more than five decades, constant research and development and featuring a completely modern production facility, Hiflofiltro offers some of the best quality filters in the world
- TUV approved and production monitored to ensure OEM or better quality
- Sold as a package of 5 filters
If you're plannig to or already have a stroker crank setup in your Yamaha WR250R/X, you'll need this stroker piston.
Features:
- All piston skirts are coated with a hi-tech Molybdenum Disulphite coating for faster break-in time and increased piston life
- Cast Replica piston kits are gravity cast aluminum alloy (not forged) with 18% silicone content, which produces an extremely light but very strong piston
- Forged Replica pistons are forged from 2618 aluminum for superior strength and durability
- Forged High Compression pistons improve power and torque across entire rpm range
- Forged Big Bore pistons increase engine’s displacement, torque, and peak horsepower
- Forged Replica pistons are forged OE replacements
- All pistons are heat treated with a T-5 hardening and tempering cycle
- Replica pistons and all rings are OEM replacements
- Kits include piston, rings, wrist pin and circlips
- Two stroke replacement rings are sold individually (Example if your piston has two rings you will want to order two rings)
- Four-stroke piston rings sold as a set
Raises compression from stock 9.5:1 to 10.5:1 for more power, torque and snappier engine response. The high quality forged piston from JE is almost a full ounce lighter than the stock cast piston. This makes for less vibration and a smoother running motor. Includes rings, pin, clips, and top end gasket set with valve stem seals and metal base gasket. Fits the standard size stock bore.
Raises compression from stock 9.5:1 to 10.5:1 for more power and snappier response. The high quality forged piston from JE is almost a full ounce lighter than the stock cast piston. This makes for less vibration and a smoother running motor. Fits the standard size stock bore.
Raises compression from stock 9.5:1 to 10.5:1 for more power and snappier response. Highest quality Wiseco pistons are forged in the USA. Fits the standard size stock bore.
As with any engine or exhaust modification, you will need to re-tune your fuel delivery system for optimum performance.
Our very own version of the popular thermostat bypass for the KLR. Gives faster warm up and more constant engine temperatures. Eliminates the wildly fluctuating engine temperature gauge. A more controlled and constant temperature is easier on your piston and cylinder and may prevent or reduce oil consumption. We use a 180 degree thermostat instead of the stock (too cold!) 160 degree unit. Warmer coolant temperature promotes better fuel vaporization and can increase fuel economy.
Our bypass system mounts the new thermostat in a small billet extension housing right where the stock thermostat is now. There is no bulky external housing to hang off the motor. The bypass hose tees in to the lower radiator hose using a length of quality high temperature silicone hose. It all makes for a clean simple installation.
Clymer motorcycle repair manuals are written specifically for the do-it-yourselfer. Whether it's routine maintenance or more extensive repairs involving engine and transmission disassembly, Clymer repair manuals provide all the information you need about your motorcycle. With step-by-step procedures, detailed photography and extensive use of exploded views, each manual is based on the complete disassembly of the machine. Unlike OEM manuals, which are purposely designed for the professional technician with an impressive array of specialized tools, equipment and knowledge, Clymer manuals are designed for the first-time user.
The DR650 manual features 278 pages of color wiring diagrams, illustrations and photographs. There are 15 chapters, ranging from general information and troubleshooting to brakes, suspension and full color wiring diagrams.
Clymer manuals are the most user-friendly repair manuals. They are written for the do-it-yourself-er as well as the experienced mechanic by industry experts. Step-by-step instructions based on the complete disassembly of the machine. This manual in written to cover 90-94 models but nearly all of the information will apply to newer models also.
With a Haynes manual, you can do it yourself…from simple maintenance to basic repairs. Haynes writes every book based on a complete teardown of the motorcycle. Haynes books have clear instructions and plenty of photographs that show each step.
- Step-by-step procedures
- Easy-to-follow photos
- Complete troubleshooting section
- Valuable short cuts
- Color spark plug diagnosis
Complete coverage for your Yamaha Trail Bikes covering PW, RT, TT-R and XT225/350 models for 1981 thru 2000.
Direct replacement for old or broken stock spark plug caps.
Spark plug caps contain a resistor that can burn out with age. Fresh caps ensure your motor gets a strong spark.
- Sold in pairs.
- Adaptable thread size
- 5k Ohm
- Allowable wire diameter 7 mm-8 mm
- 120° elbow
- Spark Plug Resistor Cover - 10/12mm
- High-performance silicone radiator hose kits
- Each kit features improved flow for better cooling – up to 9°F cooler
- Color-matched to manufacturer's production colors
- Each kit is handcrafted in the UK using the best silicone and fabric reinforcement materials and are 100% visually inspected before leaving the factory
- High-performance clamp kits (sold separately) feature marine-grade 18/8 stainless steel clamps with rounded edges, smooth inners and polished surfaces; contain all clamps necessary to complete installation of radiator hose kit
The starter bushing in the DR650 leads a tough life. Exhaust heat and minimal lube from the factory take their toll. Warp 9 has a high quality solution - a billet starter cover with a sealed ball bearing.
- CNC machined starter endcap
- Black anodized for good looks
- High Speed Abec 3 double sealed roller bearing installed
- Reduced amperage needed to start bike
- Brushes will have extended life
New starters that are manufactured to meet or exceed OEM specifications. Pull out your old starter, put in this new one and go riding. These units are built to provide a longer life than the OEM unit with these features:
- The armature is insulated for rust and corrosion protection
- Rubber seals on the top and bottom of the unit ensure a dry operation
- 90/10 copper bushings
- Extended shaft replaces long or short shaft OEM starters
- Bolt on direct OEM replacement
New starters that are manufactured to meet or exceed OEM specifications. Pull out your old starter, put in this new one and go riding. These units are built to provide a longer life than the OEM unit with these features:
- The armature is insulated for rust and corrosion protection
- Rubber seals on the top and bottom of the unit ensure a dry operation
- 90/10 copper bushings
- Extended shaft replaces long or short shaft OEM starters
Thread Chasers are designed to clean and re-cut damaged aluminum threads.
This kit contains the two sizes most common on metric motorcycles, M6x1.0 and M8x1.25.
Thread Chasers also remove dirt and metal shavings that become captured in thread grooves.
Uses 8mm or 10mm hex sockets, a Must for all tool kits.
- Allows precise valve lash adjustment without disturbing the setting when the lock nut is fastened
- Knurled knob on adjuster drivers ensure a precise and secure grip
- Integrated repositionable wrench handle holds the lock nut while the drivers are used to loosen or tighten the valve adjustment screw
Set includes:
- (1) 10mm steel socket wrench
- (1) 3mm square tappet adjuster
The headpipe gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head, thereby making them a single use part. Get a fresh one now avoid having an exhaust leak when you install your new exhaust.
The muffler joint gasket seals the joint between the head pipe and muffler. These gaskets are easily damaged when removing the original muffler. FMF mufflers (Q4 or PowerCore 4) do not require a joint gasket but the all other aftermarket mufflers as well as the stock muffler do require a joint gasket. Get a fresh one now to ease installation of your new performance muffler.
K&L® shims exceed the maximum of the Apparent Rockwell Hardness "C" scale. Shims average 47.0 compared to the 46.0 maximum.
This kit fits KLR650 87-18 as well as other brands and models , please verify correct size for your model before purchase.
29mm diameter - Includes two valve shims of each size 2.30, 2.40, 2.50, 2.55, 2.60, 2.70, 2.80, 2.90, 3.00 and 3.10. In a shim box.
20 shims in total. From K&L.
BMW / KAWASAKI / YAMAHA
This gasket seals the joint between the head pipe and muffler. These gaskets are easily damaged when removing the original muffler. FMF mufflers do not require a joint gasket but the all other aftermarket mufflers as well as the stock muffler require a joint gasket. Get a fresh one now to ease installation of your new performance muffler.
A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing due to weathering or chemicals. Anti-Seize assures easier disassembly. Temperature range: -60°F to 1600°F (-50°C to 870°C). Salt, corrosion and moisture resistant – ideal for marine use. Meets Mil Spec #907E.
- Allows precise valve lash adjustment without disturbing the setting when the lock nut is fastened
- Knurled knob on adjuster drivers ensure a precise and secure grip
- Integrated repositionable wrench handle holds the lock nut while the drivers are used to loosen or tighten the valve adjustment screw
- Includes 10mm socket with straight slot adjuster
- Fit motorcycles and ATVs with straight slot screw-type adjusters and 10mm lock nuts
Getting ready to adjust your valves? Here is a set of feeler gauges to make the job a little easier. One tool has .002" & .003" gauges the other has .004" & .005" gauges. Yamaha lists the specs as follows: .002"-.004" Intake and .004"-.006" Exhaust, clearance measured when engine is cold.
A set of feeler gauges so you can adjust the valves on your Yamaha. Yamaha says that when the bike is cold, the Intake should be between .002" and .004" and the Exhaust should be between .006" and .007".
This set includes one gauge with a .004" on one end and a .005" on the other for your intake side and another with a .006" and .008" for the exhaust side.
Cylinder head upgrade. Features CNC machined port shapes, larger high performance valve seats and custom made valves. Valve sizes are increased from the tiny stock 33mm intake & 28mm exhaust to 36mm intake & 32mm exhaust. This is not a radical modification. These bigger valves bring the valve sizes up to what would normally be found on other brands of 650 singles.
Big Valve Heads are sold only on an exchange basis. We need your stock head for the next batch of modified heads.
We strongly recommend checking valve to piston clearance when installing oversized valves.
The headpipe gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head, thereby making them a single use part. Get a fresh one now avoid having an exhaust leak when you install your new exhaust.
The muffler joint gasket seals the joint between the head pipe and muffler. These gaskets are easily damaged when removing the original muffler. Get a fresh one now to ease installation of your new performance muffler.
This gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head. Get a fresh one now and avoid having an exhaust leak after you install your new exhaust.
This exhaust system is ideal for a racer on a budget that is not willing to compromise on performance! The T-4 comes complete with our stainless head pipe that works in conjunction with the silencer to produce more power from bottom to top. The use of stainless steel for the header pipe offers increased strength and should give years of trouble-free use. The silencer canister is easy to repack by removing the inlet cap screws and re-wrapping the silencer core. The T-4 meets all AMA sound restrictions.
The T-6 exhaust system contains a stainless steel head pipe, brushed aluminum canister and a carbon fiber end-cap for added durability and a professional look. This exhaust system features the same benefits as the T-6 Stainless Steel Exhaust System, but is designed to fit Yamaha's TT-R125 model. In addition to all of these features, the T-6 will come with a removable United States Forest Service approved spark arrestor for trail/off-road riding.
Features Include:
- Improves performance
- Stainless steel construction throughout head pipe
- Brushed aluminum canister
- Carbon fiber end-cap
- Strong mounting bracket for increased strength and durability
- Asymmetrical muffler configuration for increased packing volume
- Removable U.S.F.S. approved spark arrestor
- Two piece system including head pipe and canister
- TIG precision welding
The T-6 Stainless Steel Exhaust System offers the same benefits as our popular Ti-6 Titanium Exhaust System, but the T-6 is constructed of stainless steel and aluminum for increased strength and durability while giving riders a more affordable alternative to titanium. The T-6 comes with a removable United States Forest Service (USFS) Approved Spark Arrestor making it easy to alternate between off-road and closed course riding.
Features:
- Improved performance
- Titanium canister
- Stainless steel header
- Carbon fiber end-cap
Includes the Enduro Series RS-2 muffler and stainless steel header. This potent and versatile design is engineered to provide increased power and power delivery. The RS-2 has a pyramidal shape that features increased volume, and is a quieter system with a larger core — and it offers the added bonus of outstanding performance in a value-priced package.
All of these options are for complete systems, including head pipe and muffler. The S option is for a Silencer only while the S/A is for a system with a Spark Arrestor.
The latest version of the Powercore 4 design incorporates a hi-flow core which mas more surface area to absorb more sound while flowing more exhaust. The silencer is constructed with an extruded aluminum canister is MIG/TIG welded and has space age internal packing. This system is lighter, stronger and provides more power than stock exhausts. The pipe is a stainless steel unit for strength and weight savings.
Powercore 4 S/A has a US Foresty approved, maintenance free, stainless steel spark arrestor screen to be sure you are safe and legal in the woods.
The EVO R series draws on our rich heritage of making power. Offered for various off road MX and sport ATV models, the EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.
- Hard anodized oval shaped aluminum muffler
- TIG welded reinforced muffler bracket(s)
- 304 stainless steel mid pipe
- Red powder coated stainless steel end tip
- Lighter than stock exhaust system
- Huge horsepower and torque gains
- Sleek muffler design allows for maximum clearance
- Removable screen-type spark arrestor included
- Handmade in the USA
- 1 Year Limited Manufacturer’s Warranty
Hard anodized oval shaped aluminum muffler with a TIG welded reinforced muffler bracket and red powder coated stainless steel end tip. Sleek muffler design gives you lots of clearance and it has a removable screen-type USFS approved spark arrestor. Head and mid-pipe are constructed from 304 stainless steel. Entire unit is pounds lighter than stock and gives great horsepower and torque gains throughout the RPM range.
All handmade in the USA with a 1 Year Limited Manufacturers Warranty.
The Mini Powercore 4 is the best bang for your buck performance exhaust system out there.
Offered as a standard Mini Powercore 4, or as a Spark Arrestor Version, the Mini Powercore 4 features a Hi-Flo stainless steel core and formed end caps, an aircraft grade aluminum canister and a durable stainless steel header. It is pounds lighter than stock and you will swear the motor has been bored and stroked with the first twist of the throttle.
Another great combination package - the FMF Powerbomb header and Powercore 4 Muffler.
The Powerbomb header promotes better flow by allowing a small expansion of the exhaust gasses improving scavenging. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels.
The PowerCore4 muffler was developed to increase the horsepower and torque throughout the entire power curve and give you a noticeable power increase that is very usable and beneficial, no matter what your riding style or ability is.
Some of the features of the PowerCore 4 include: space age internal packing for maximum packing life; hi-flo modular end cap; internal shape of core uses hi-flo technology; enhanced sonic evacuation provides for higher flow and increased power and removable spark arrestor.
The FMF Powerbomb and Q4 Muffler are legendary in the exhaust market.
The Powerbomb header promotes better flow by allowing a small expansion of the exhaust gasses improving scavenging. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels.
The Q4 muffler employs intricate chambers, baffles and proprietary multistage packing material making it the best performing quiet muffler available with a sound output of 96dB; with most models below 93 dB. It is constructed from aircraft grade aluminum and high strength stainless steel.
Replacement Exhaust Pipe Retention Spring
- This swivel spring replacement will work on nearly any exhaust system with a similar spring.
- Made from stainless steel, and has a high temp silicon sleeve to protect exhaust component finish.
- Made by Akrapovic, 60mm size, SOLD EACH
The T-6 Stainless Steel Exhaust System offers the same benefits as our popular Ti-6 Titanium Exhaust System, but the T-6 is constructed of stainless steel and aluminum for increased strength and durability while giving riders a more affordable alternative to titanium. The T-6 comes with a removable United States Forest Service (USFS) Approved Spark Arrestor making it easy to alternate between off-road and closed course riding.
Features:
- Improved performance
- Titanium canister
- Stainless steel header
- Carbon fiber end-cap
Hard anodized oval shaped aluminum muffler with a TIG welded reinforced muffler bracket and red powder coated stainless steel end tip. Sleek muffler design gives you lots of clearance and it has a removable screen-type USFS approved spark arrestor. Head and mid-pipe are constructed from 304 stainless steel. Entire unit is pounds lighter than stock and gives great horsepower and torque gains throughout the RPM range.
All handmade in the USA with a 1 Year Limited Manufacturers Warranty.
The EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.
- Hard anodized oval shaped aluminum muffler
- TIG welded reinforced muffler bracket(s)
- 304 stainless steel mid pipe / head pipe
- Red powder coated stainless steel end tip
- Lighter than stock exhaust system
- Huge horsepower and torque gains
- Sleek muffler design allows for maximum clearance
- Removable screen-type spark arrestor included
This gasket seals the joint between the head pipe and muffler. These gaskets are easily damaged when removing the original muffler. FMF mufflers do not require a joint gasket but all other aftermarket mufflers as well as the stock muffler require a joint gasket. Get a fresh one now to ease installation of your new performance muffler.
If you are adapting a GSXR or Hayabusa muffler to your DR650 you will need a fresh gasket that seals between the muffler and the mid-pipe adapter. There are two sizes depending on which OEM muffler you are using. The 4-bolt mufflers use the 2-1/2" OD seal ring. The 3-bolt mufflers use the 2-3/4" OD seal ring.
The RS-4 Twin Pipe kit was previously only available as a custom system for Kevin Schwantz.
Yoshimura is offering these incredible "Twice Pipes" which are completely fabricated by hand and TIG welded to perfection. They certainly sit at the high end of what is available for the mighty SM... The pipes have a stainless steel header and "Y" pipe mated to twin carbon fiber or aluminum RS-4 mufflers for incredible looks and performance. The kit also comes with a custom Yoshimura side stand.
- Pentagonal-shaped sleeve
- Front muffler cap functions as a poly resonant chamber which helps reduce noise
- Two-stage stepped baffle
- Carbon fiber end-cap
Their baffle was designed to replace the stock insert. The baffle produces a nice note compared to the de-restricted stock version and dyno test results showed an increase on 2 hp up top.
A noise test on the insert was conducted at the EPA Victoria Vehicle Test Station at Macleod under controlled conditions with Class 1 meters.
Tested Bike | ADR Signature dB(A) & test RPM | ADR tess with B&B Tip |
---|---|---|
Suzuki DRZ 400 | 93 dB(A) @ 3375 RPM | 97 dB(A) @ 3375 RPM |
Some extra details:
- The ADR test is conducted at an engine speed which is 50% of the engine rpm at which the engine develops maximum power. However, this engine speed is determined when the bike is in restricted form, with a throttle restrictor that stops the throttle being fully opened. This is why the ADR engine test speeds are so low. However, they are the engine speeds used to determine compliance.
- On the ADR test, the B&B tip was over the signature noise emission, but a tolerance of 5 dB(A) is allowed before prosecution would be initiated. With this tolerance, the insert would not be prosecuted as it is just 4 dB(A) over the signature.
- When tested with the standard OEM tips (as fitted when delivered from Suzuki Australia), the Suzuki came in at 95 dB(A) for the ADR test
Does not contain a spark arrestor. Check local laws on spark arrestors before purchase.
The latest in muffler packing technology. Spec 31 high performance muffler packing resists breakdown up to 1400°F, is universal, and is easy to install.
- Kits come in 2 lengths - 15" and 19"
- Pillows can be trimmed to length to fit different mufflers.
- Includes a cap stuffer to fill packable end caps.
The EVO R series draws on our rich heritage of making power. Offered for various off road MX and sport ATV models, the EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.
- Precision-bent TIG welded 304 stainless steel head pipes & collector pipe
- Larger diameter than stock head pipe
- Lighter than stock head pipe
- Increased horsepower and torque gains
- Handmade in the USA
- 1 Year Limited Manufacturer’s Warranty
The EVO R series draws on our rich heritage of making power. Offered for various off road MX and sport ATV models, the EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.
- Precision-bent TIG welded 304 stainless steel head pipe
- Larger diameter than stock head pipe
- Lighter than stock head pipe
- Increased horsepower and torque gains
- Handmade in the USA
- 1 Year Limited Manufacturer’s Warranty
The FMF Gnarly pipe focuses on increasing the lower RPM horsepower and torque to get you out of the toughest terrain. When looking to add 4-stroke tractor like torque to your 2-stroke and you need a pipe to withstand the harsh elements, this is the pipe for you. Strong and rugged, this aggressive pipe dishes out handfuls of torque and bottom to mid range pull needed for late model 200cc through 500cc machines and the rigors of the off road domain.
- Nickel plating is an FMF trademark and has been ‘copied’ by everyone making it the most imitated expansion chamber in the world.
- Super strong18 gauge steel construction makes it GNARLY!
- O-Rings Included