Same-day shipping cutoff: Noon Pacific Time

Search Products

ProCycle 440cc BIG BORE 89mm KIT 2 With Cam Complete kit with 11:1 Wiseco piston (with rings, pin & clips), big bore cylinder sleeve, HotCams stage 3 camshaft and top end gasket set. You will have to have the larger sleeve installed in your cylinder.

Please contact us for availability information
$519.95
DRZ400S '00 - '25 DRZ400SM '00 - '25 DRZ400E '00 - '07

Built with the latest in Lithium Ion Polymer Technology. All components are designed, manufactured, assembled and packed in one location assuring high quality and consistency. Besides extreme lightweight (50% to 70% lighter than standard lead-acid batteries) it also features a built-in LED test gauge and the ability to mount it in any position. There is no hazardous acid or heavy metals, it is non-explosive and non-combustible.

The Firepower features Increased cranking amps over lead acid batteries and has a very fast recharge cycle and can be brought up to a 90% charge within 6 minutes and also has 6 to 12 times more cycle life when compared to lead acid batteries. A 2-year warranty insures that your investment is protected.

165 CCA 12V/36WH
Package Dimensions: 6.20 x 2.80 x 4.30

Ships in 3-5 business days
$149.95
TW200 '87 - '25

Changing your countershaft sprocket? Here is the gasket you need for the left hand side case cover of your TW200. This is the same side of the engine as your gear shift lever and chain.

Ships same business day
$10.95
TW200 '87 - '25

Here is a high quality aftermarket air filter made by HiFlo. Until now, only European TW owners had access to this high quality product. We have these in stock ready to ship! Be sure to treat this air filter with a high quality air filter oil, such as the No-Toil Oil shown below.

No Toil Care Kit
Ships same business day
$9.95
DRZ400 '00 - '03 DRZ400SM '05 - '25 DRZ400E '00 - '07 DRZ400S '00 - '25

A high quality cam chain from the folks at Wiseco. New cams, big bore kit, high-mileage motor, you might want to think about a new cam chain. Direct replacement for stock unit.

Add Cam Chain Manual Tensioner
Ships in 3-5 business days
$83.95
KLR650 '84 - '07

The FMF Powerbomb is a four stroke header pipe unit that has a unique bulge precisely located in the header system. A "pre-muffler" of sorts, the Power Bomb actually lowers sound output because it creates more surface area to absorb the sound medium (exhaust). The surface area of the perforated core lets the sound exit into the absorbing material (steel wool packing) and then allows the air to expand, cool and ramp back up with the higher pressure air. The result? The FMF Powerbomb is instrumental in reducing the decibel level on any four stroke and because of the expansion and contraction on exhaust through the system, the flow has been increased by nearly 10%. That means more power throughout the range.

Features:

  • Tuned for bottom to mid performance
  • Powerbomb headers are the front runner in performance headers
  • Designed for full service access to oil filter
Choose Year
Backordered: Waiting for stock from suppliers to fulfill orders placed on or after December 2023
$249.95
KLX110 '02 - '09 DRZ110 '03 - '05

The T-6 Stainless Steel Exhaust System offers the same benefits as our popular Ti-6 Titanium Exhaust System, but the T-6 is constructed of stainless steel and aluminum for increased strength and durability while giving riders a more affordable alternative to titanium. The T-6 comes with a removable United States Forest Service (USFS) Approved Spark Arrestor making it easy to alternate between off-road and closed course riding.

Features:

  • Improved performance
  • Titanium canister
  • Stainless steel header
  • Carbon fiber end-cap
Choose Year and Model
Please contact us for availability information
$465.95
KLR650 '87 - '07

Designed for use with stock engines using either stock or aftermarket exhaust and air filters.

  • Provides a simple and affordable solution to carburetor tuning problems.
  • Allows you to tune your bike for increased power and smoothness while retaining fuel economy.
  • Includes a guide on how to install and use your jet kit to it's full potential.
  • For a top quality installation we recommend adding an extended fuel screw and a set of replacement carb screws.
Choose Year
Add Pocket Tuner Tool
Ships in 3-5 business days
$93.95
KLR650 '87 - '18

This kit includes 2 Needles that have been developed by JD Jetting and manufactured for them to their exacting specifications. These two needles allow a wide range of tuning possibilities and provide correct fuel delivery at any throttle position.

4 allen type screws for the float bowl are also enclosed should you strip out the stock screws during your tuning process. Complete instructions with photos, jetting suggestions for different set-ups and situations, 5 Main Jets and a drill bit complete the package.

Add Pocket Tuner Tool
Ships same business day
$84.95
KLR650 '87 - '18

For adjusting valve clearance on twin cam models. Holds valve spring collar down so adjusting pads can be removed. From Motion Pro, made from hardened alloy steel.

Ships same business day
$9.95
XT250 '08 - '25

The EBC DRC kit is the best way to reset your bike’s clutch to the exact as new standard sizing. Replacing just the plates can work but new clutch springs are always better and springs get tired and can cause slippage plus the separator steel plates from EBC are pin-planished, forming tiny indents in the steel which improves the spread of oil around the clutch surfaces.

Includes:

  • Friction plates with EBC unique alloy article impregnated clutch facings that wear longer and resists burning.
  • Pin planished steel intermediate plates.
  • New 10-15% uprated heavy-duty Clutch springs. 
Ships same business day
$116.95
KLR650 '87 - '07

The FMF Power-Up jet kit makes jetting your carb simple. They teamed up with DynoJet to produce a kit that offers you a selection of jets and/or needles to get maximum horsepower out of your KLR. The easy to use instructions have diagrams and step-by-step procedures to help you get your jetting where it needs to be, no matter what elevation you ride at. No more driving back and forth to the dealer with a handful of jets and needles with a million questions running around in your head about where to start or turn next.

Add Pocket Tuner Tool
Ships same business day
$79.95
$49.95
Africa Twin (CRF1000L) '16 - '17 990 Adventure '07 - '13 950 Adventure '03 - '06 CB500X '13 - '25 T7 Ténéré 700 '21 - '25 KLX230 '20 - '20 KLX230R '20 - '20 T7 Ténéré 700 '20 - '25

Built with the latest in Lithium Ion Polymer Technology. All components are designed, manufactured, assembled and packed in one location assuring high quality and consistency. Besides extreme lightweight (50% to 70% lighter than standard lead-acid batteries) it also features a built-in LED test gauge and the ability to mount it in any position. There is no hazardous acid or heavy metals, it is non-explosive and non-combustible.

The Firepower features Increased cranking amps over lead acid batteries and has a very fast recharge cycle and can be brought up to a 90% charge within 6 minutes and also has 6 to 12 times more cycle life when compared to lead acid batteries. A 2-year warranty insures that your investment is protected.

Rated at 250 CCA (Cold Cranking Amps)
Package Dimensions: 6.20 x 3.70 x 4.80

Ships in 3-5 business days
$204.95

All the advantages of a flatslide pumper carburetor at a much friendlier price than a Keihin FCR.

Our complete genuine Mikuni TM40 pumper carburetor kit comes with alloy adapter rings bonded to the carburetor body for a firm reliable fit in the stock air boots. We also include new 3" longer than stock throttle cables, a remote mounted choke knob, complete instructions along with a wide range of main jets and pilot jets for fine tuning or to accommodate bikes with extensive modifications.

Add Pocket Tuner Tool
Add Lighter Return Spring
Ships same business day
$579.95
SV650 '99 - '15 V-Strom (DL1000) '02 - '25 V-Strom (DL650) '04 - '25
  • Constructed using the best materials available
  • TUV approved and production monitored to ensure OEM or better quality
  • Sold as a package of 5 oil filters
Ships same business day
$35.95
DR650 '96 - '25 XR650L '93 - '25

The ultimate factory activated lead-acid battery upgrade from stock.

40% more amp-hour capacity and 70% more cold cranking amps (230) than the stock battery. This is a genuine YUASA battery. Lasts longer and has increased vibration resistance. Ships pre-filled, sealed, and ready for use.

Note: This battery is taller than stock. The factory battery strap cannot be used to secure it. Factory-activated batteries should be charged once a month when not in service.

Dimensions: 6" x 3-7/16" x 4-3/8"
Weight: 8.5lb
12V/11.2AH 230cca
Positive terminal location: Left Front 

Ships same business day
$255.95

High-performance, high-flow filter element and filter base for the TT-R 125.

  • Replaces stock filter and base
  • Filter base is made from HDPE plastic
  • 3 times larger than stock filter!
  • Adds almost 1/2 horsepower
  • Designed to fit inside the factory air box
Ships same business day
$104.95
TTR125 '00 - '25

Tune your stock carburetor for better power and response, easier starting and quicker warm up. Mikuni main and pilot jets.

  • Main Jets: #110 & #112.5
  • Pilot Jets: #17.5 & #20
Add Pocket Tuner Tool
Ships same business day
$29.95
KLR650 '84 - '07
  • The Q4 employs intricate chambers, baffles and proprietary multistage packing material making it the best performing quiet muffler available
  • Constructed from aircraft grade aluminum and high strength stainless steel
  • Sound rating 96dB
  • Much lighter than the stock muffler
Choose Year
Please contact us for availability information
$449.95
TTR125 '00 - '25
  • Bonded, two-layer foam designed for maximum protection and airflow
  • Super Seal material seals off 100% water and remains air tight without grease.
Ships same business day
$19.95

The Rekluse EXP employs the same EXP assembly as their premier product; the difference is that it fits into your stock clutch assembly, saving you money! Now you can enjoy the benefits of Rekluse auto-clutch technology on your KLR.

An auto-clutch automatically feeds out the engagement of the clutch using centrifugal force. This allows you to start and stop without touching the clutch lever. The automatic feed is fully adjustable to suit the rider's needs while retaining full manual override with the clutch lever. This automatic feed delivers easier on/off throttle transitions, improved traction, better control, and more confidence.

Ships same business day
$848.95
XR400R '96 - '04 XR650R '00 - '07

A HIGH output performance stator that replaces the OEM stator in the Honda XR400R and XR650R models.

ElectroSport designed this to have two sets of output windings: one is floated from ground and has two output leads, and the other is grounded on one side. Both windings also have different winding configurations to ensure optimum output.

Built on a modern stator core made of highly magnetically conductive material. They install the highest grade copper wire using their state-of-the-art computer controlled winding machines and they connect high quality lead wires that are both abrasion and heat resistant.

This stator comes with high grade rubber seals and connectors installed and as such is a plug in replacement.

Even if you don't need the extra lighting or charging output you can still use it as a straight replacement for the OEM stator and it is a very cost effective solution that way.

  • Separate circuits for lighting and ignition
  • Two output circuits (100w & 50w)
  • Fits under the stock flywheel with no modification
  • Replaces the stock OEM stator
Please contact us for availability information
$159.95
SV650 '99 - '25 KLX250S '06 - '25 V-Strom (DL650) '04 - '25 CRF150R '07 - '25 Ruckus (NPS50) '03 - '09 Ruckus (NPS50) '11 - '16 WR250R '08 - '18 WR250X '08 - '11

7.48mm diameter - Includes three valve shims of each size from 1.20 to 3.50mm in .05mm increments.

141 shims in total. 0.57 cents per shim! Does your local dealer have the shims you need?

Ships same business day
$114.95
CRF100 '93 - '25 XR100 '93 - '25

Heavy duty springs help prevent clutch slip in high-performance motors.

  • Custom wound from chrome-silicon wire
  • Preset for long life
  • Higher spring seat pressure to resist clutch slip
Ships in 3-5 business days
$41.95
KLR650 '87 - '25
  • Increased air flow over the stock air filter
  • Designed to increase horsepower and throttle response
  • Easily fits inside the factory air box
  • Larger surface area over foam filters which offers longer service intervals in dusty conditions
  • Four layers of premium cotton gauze provides outstanding filtration
  • Washable & re-usable, never wears out
  • One filter will last the lifetime of your bike
Add Air Filter Care Kit
Ships same business day
$72.95
DR650 '90 - '25

Replace the worn slide guide in your stock Mikuni BST carburetor before it causes additional wear to the needle and needle jet. There are wear indicators on the slide guide that help you recognize when it is time to replace your slide guide.

Add Carburetor Slide
Ships same business day
$37.95
CRF150R '07 - '18 CRF250R '04 - '25 CRF450R '02 - '25 DR650 '96 - '25

This cover acts as an 'adjustable leak jet' to fine tune the accelerator pump squirt.

Eliminates "4-stroke bog" when used with correct jetting. Allows the use of correct carburetor settings to optimize performance, starting and reliability. Improved low-end performance with much better throttle response. Investment cast and finished to precise tolerances with internal high volume vertical check valve. Fits all motorcycles and ATVs using a Keihin FCR carburetor Easy installation instructions (including online video) and template.

Not for the stock DR650 carburetor Fits FCR-MX conversions Only.

Ships in 3-5 business days
$119.95
XR100 '81 - '25 CRF100 '81 - '25

Complete big bore kit. Bolt it on and ride!

  • Includes a pre-bored, big-finned aluminum cylinder for improved cooling
  • Cylinder, rings, piston pin, & clips
  • BBR exclusive performance camshaft
  • Heavy-duty valve springs
  • Rockers with tappet adjusters
  • Gasket kit
Ships in 3-5 business days
$329.95
XT250 '08 - '25

This gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head. Get a fresh one now avoid having an exhaust leak when you install your new exhaust.

Ships in 3-5 business days
$11.95
DR650 '96 - '25

Have you lost or broken the stock air filter cage for your DR? Maybe you need a spare? Here it is, the OEM cage that will fit any of the foam air filters on this page. This kit includes the plastic holder that keeps the cage in place and the screw for that as well.

Ships same business day
$33.95

Raises compression from stock 9.5:1 to 10.5:1 for more power and snappier response. The high quality forged piston from JE is almost a full ounce lighter than the stock cast piston. This makes for less vibration and a smoother running motor. Fits the standard size stock bore.

Ships same business day
$241.95
Universal fit. May require additional adjustment or modification.

Protect your head pipe from rock damage. This stainless steel spine clamps to your head pipe to add a layer of protective armor between your vulnerable pipe and those nasty rocks or logs. Fits the stock headpipe. Will fit the FMF head pipe with the addition of larger clamps.

Ships same business day
$45.95

A set of feeler gauges so you can adjust the valves on your Yamaha. Yamaha says that when the bike is cold, the Intake should be between .002" and .004" and the Exhaust should be between .006" and .007".

This set includes one gauge with a .004" on one end and a .005" on the other for your intake side and another with a .006" and .008" for the exhaust side.

Backordered: Waiting for stock from suppliers to fulfill orders placed on or after April 2024
$12.95
DR650 '96 - '25

This is all you need to not only change your oil, but protect your motor as well. We include a magnetic drain plug, to help catch stray metal pieces, a 10-pack of oil filters, and new O-Rings to replace any you have that may be leaking or worn.

  • Magnetic Drain Plug
  • O-Ring Kit
  • 10-Pack of Oil Filters
Ships same business day
$57.95

This gasket seals the joint between the head pipe and muffler. These gaskets are easily damaged when removing the original muffler. FMF mufflers do not require a joint gasket but all other aftermarket mufflers as well as the stock muffler require a joint gasket. Get a fresh one now to ease installation of your new performance muffler.

Please contact us for availability information
$19.95
Universal fit. May require additional adjustment or modification.

This Quiet Insert comes stock in all new FMF Q4 mufflers. If you lost yours, this is the replacement you need.

It will fit Q4, Q4 Hex, Powercore and Powercore Hex mufflers.

It will reduce the sound rating of the Power Core models, from about 99db down to about 96db.

Please choose the correct Insert for your muffler. If you are unsure of the year that your muffler was manufactured you can easily identify visually which insert you will need.

Pre '21Installs using one small screw
'21-CurInstalls using a spiral retaining ring
Choose Muffler Year
Add Anti-Seize
Ships same business day
$39.95
Universal fit. May require additional adjustment or modification.

This bright and compact 6-LED flashlight plugs right into your SAE battery charging socket for hours of light. In addition, it has a charging system check that lets you know if your bike is charging properly. It features a 40 inch cord so you can see in those out of the way places when you need to.

Add Charge Ring Connector
Ships same business day
$24.95
Universal fit. May require additional adjustment or modification.

The Optimate Cable O-20 is a SAE weatherproof bulkhead/panel mount power source. Main body fits a 1" dia. hole. Overall length of the unit is 12" from top of bulkhead to end of connector. Both connectors are industry standard 2-pin SAE connectors. We also offer an optional stainless steel bracket that you can bolt on wherever you like. This makes a clean installation and you won't have a charging cable hanging loose.

Cable max. rating is 10 Amps. Includes an in-line rubber seal at the connector end and a protective cover at the bulkhead for when you don't have something plugged in. Unit has a 3-year limited warranty.

Don't have an SAE plug attached to your battery? Choose the add on below.

Add Charge Ring Connector
Add Mounting Bracket
Ships same business day
$19.95
XR650L '93 - '21

The RS-2 is a potent and versatile design that evolved from our original TRC, engineered to provide increased power and power delivery. With a different pyramidal shape that features increased volume, the RS-2 is a quieter system with a larger core - and it offers the added bonus of outstanding performance in a value-priced package.

  • Diamond-shaped Stainless steel sleeve for increased durability.
  • Large core and increased muffler packing volume means quieter operation
  • Stainless steel cone end-cap
  • Stainless steel tail-pipe
  • Weight: .39 lbs lighter than stock configuration
  • USFS Approved spark arrester included
Ships in 3-5 business days
$448.95

The DR650 has two unused 'switched' power plugs. One behind the headlight and another under the seat. This plug & pigtail assembly allows you to easily access a 12v power supply that is only on when your key switch is on.

Use it to power a GPS, charge a cell phone, run heated grips or even power a relay. Plug has leads approximately 1 foot long and a 7.5 amp miniature blade fuse.

Ships same business day
$15.95
Monkey (Z125M) '19 - '21
  • Fits directly into OEM airbox with application specific Sealing Bead to ensure a precise fit
  • Fuel-management modifications are not required for increased performance
  • Pleated media provides a large filtration area offering long service intervals
  • Designed to provide increased performance
  • Made in the U.S.A.
Please contact us for availability information
$69.95
DR650 '96 - '25

Replacement brush plate kit fits both original stock or aftermarket starter motor.

Add Starter Cap, Ball Bearing Warp 9 Racing
Ships same business day
$39.95

These Mikuni carburetors are correctly sized and easily fitted to your Honda XR600 and XR650L stock motor mounting flange after removing the locator tags and also match the air box when using the silver anodized air-box adapter. This adapter is fitted prior to delivery when purchasing complete kits. For this Mikuni carburetor to operate correctly the motorcycles air box must be opened up to allow more air flow in. Using a hole saw, a 45mm diameter hole will be sufficient for a Suzuki DR650 but some Honda’s require way more. The best process is to keep opening up the air-box until no more improvement is noticed and you will be surprised at the difference. The kit also comes with throttle cables and a 1/4 turn quick action throttle which must be lubed before fitment. The carb comes with a couple of  Honda specific adjustments made and pre jetted for your engine. A specially made size 30 pump nozzle is fitted as the accelerator pump circuit on TM42 carbs will not work properly on Honda’s or Kawasaki’s without it.

Climate, altitude and fuel density from different octane fuels all have varying effects on final fine tuning as does cam, exhaust and cylinder head porting etc. For this reason, we have included what we have found to be a range of jets to allow you to tune to most variables.

This carb fits with most aftermarket large capacity tanks.  Some larger capacity tanks do not allow the fitment of this carb without modification. A competent person can easily heat and depress the contact area around the throttle mechanism allowing for clearance on problem tanks. Polyethylene tanks start their life as lump of poly that when melted evenly spreads itself around a rotating mold, to later carefully heat with a heat gun any section of a tank and change the shape has no effect on the integrity of the poly itself unless pushed too far, thinning it. We recommend having this professionally done for the reason some people may neglect to properly remove all the fuel from an existing tank or if not competent may make a mess of it. 

Please contact us for availability information
$689.95
KLR650 '87 - '18 XR650L '00 - '25 DR650 '96 - '25

Voyager Pro, The Connected Rider’s GPS. Trail Tech offers a variety of model specific and universal kits for complete vehicle integration. All kits include mounting hardware, tach sensor, and power connection. Temperature and wheel sensors vary by kit, see kit contents for details. Adventure Begins Here!

Trail Tech provides a one year warranty and unlimited free phone and email support.

  • Trail Tech Voyager Pro, the Connected Rider’s GPS. A premium off-road GPS with 4 inch color touchscreen anti-glare display, sealed and rated IP67 for anti dust/water intrusion
  • The map screen is enabled with base maps, topography lines, hill shading, and some trails. Record or load GPX trails and riding areas, and transfer to a PC using the MicroSD card. Voyager Pro comes loaded with North American maps, but other map regions can be downloaded for free.
  • Amongst the major features is Buddy Tracking. Buddy Tracking uses localized radio signals and can support up to 20 riders in a single group. View members of your ride group on the map screen in real time, increase your following distances, and use the buddy beacon to summon your buddies. Cell reception is not required.
  • Buddy tracking displays the current location of up to 20 members of your ride group on the map screen
  • Voyager Pro is Bluetooth enabled for intercom, phone and media controls. Play songs from your phone or MicroSD card using a Bluetooth headset, speaker, or intercom. Two phones and two headsets can be connected at the same time.
  • The 4 inch glove friendly color touchscreen TFT display is visible in all conditions, including direct sunlight. Sealed and rated IP67 for anti-dust and water intrusion, it is built to withstand the harshest elements that come with extreme riding conditions. The mounting dock hard mounts to the dashboard, can be locked, and allows for quick removal of Voyager Pro from the machine. The dock utilizes the AMPs hole pattern, and is compatible with the full line of RAM brand mounts or Trail Tech mounting hardware.
  • Voyager Pro integrates with your vehicle using standard Trail Tech vehicle sensors, providing vital ride data such as engine temperature, RPM, battery voltage, speed/distance and more.
  • At 5.6 x 3.5 inches, Voyager Pro still fits on dirt bike dashboards, but is big enough to use on adventure bikes and UTVs. Voyager Pro’s mapping abilities and buddy tracking make it the premium choice for off-road riders.
Ships in 3-5 business days
$669.95
KLX140(R) '11 - '25 KLX140L(RL) '11 - '25 KLX140G(RF) '17 - '25
  • Dual-muffler design exhaust system
  • Achieves maximum performance, mass centralization, and rider usability
  • Systems feature three-stage tapered headpipe for the best power gains, better throttle response and power delivery
  • Vertical divider splits the exhaust gases more evenly for smoother flow to the mufflers for better mid-top power and throttle response
  • Parallelogram-shaped muffler bodies increase muffler volume over the stock system for even crisper throttle response and reduced noise levels
  • Systems meet AMA noise sound regulations right out of the box (AMA 2-Meter Max and Amateur 94 dB sound compliant)
  • Muffler inserts are tunable to adjust power delivery and noise level
Please contact us for availability information
$499.95
Monkey (Z125M) '19 - '20

This beautifully shaped exhaust perfectly matches the Monkey’s unique character. The twin conical mufflers are constructed from stainless steel and feature titanium sleeves. Offers power gains throughout the entire rpm range along with a reduced weight. The sporty but classic appearance can be further enhanced by adding the specially designed carbon fiber heat shield.

DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.

Please contact us for availability information
$654.95
Monkey (Z125M) '19 - '20

Replacement Carbon Fiber Heat Shield for the Honda Monkey made by Akrapovic for their Muffler

Please contact us for availability information
$172.95
990 Adventure '07 - '13
  • These bands are the visible part of two fiber reinforced nylon injection moldings which form the structure on which the unique Tri-Foam filter system is bonded.
  • The two outer layers of foam provide optimum filtration and load-up capacity while the inner layer is made of special self extinguishing filter foam.
  • Together, they give the best combination for air flow, engine protection and safety.

This is ONLY a replacement filter for the ProCycle ITG kit and is not a direct swap for OEM.

Ships same business day
$114.95
DR650 '96 - '25 CRF150R '07 - '18 CRF250R '04 - '25 CRF450R '02 - '25 CRF450X '03 - '25 KX250F '04 - '25 KX450F '06 - '25 WR250F '01 - '25 YZ250F '01 - '25 YZ450F '03 - '25

Direct replacement for the stock spring and exactly like the old Merge Racing spring. Gives a much more consistent accelerator pump squirt. Eliminates the need for the 'O-ring mod', wire or zip-ties on the pump arm. Fits all Keihin FCR-MX carbs except '07-'08 CRF250/450.

Not for the stock DR650 carburetor Fits FCR-MX conversion Only

Ships same business day
$29.95
KLR650 '87 - '07 DRZ400S '00 - '25 DRZ400SM '05 - '25 DRZ400E '00 - '07 DRZ400 '00 - '03 XR650L '93 - '25 DR650 '96 - '25 KLX140(R) '08 - '25 KLX140L(RL) '08 - '25 KDX220 '98 - '05 KDX200 '89 - '06 KLX300 '97 - '07 DR350SE '90 - '99 DR350 '90 - '99 DR250 '90 - '95 XR400R '96 - '03

All the parts you need to freshen up your brake master cylinder. New piston, seals, return spring, boot and snap ring.

Made by Nissin, an OEM supplier in Japan

Ships same business day
$26.95
Universal fit. May require additional adjustment or modification.

Based on the wildly popular Race Tech Suspension Seminars taught by Paul Thede around the world, this step-by-step guide shows riders how to make their bikes handle like the pros. Thede gives the lowdown on all types of suspension, including cartridge and non-cartridge forks as well as dual-chamber and nitrogen-charged shocks.

The three forces of suspension, testing procedures, even the black arts of chassis geometry: Thede explains it all. The book provides step-by-step photos of suspension disassembly and assembly as well as a detailed troubleshooting guide for dirt, street and track.

Ships same business day
$34.95
Universal fit. May require additional adjustment or modification.

Can break or rivet chains from #35 to #530 like a pro.

kit includes a 2mm, 3mm, and a 4mm pin to fit most chains.

kit includes press plates,and all necessary riveting pieces and comes in a durable plastic case.

NOTE: when breaking a chain, YOU MUST grind the heads off of both pins on a link first.

Please contact us for availability information
$74.95
KDX200 '95 - '06 KDX220 '95 - '06
  • The most popular 2-stroke silencers in FMF's arsenal
  • The elliptically shaped bodies with perforated core perform well in any condition
  • Equipped with a Performance Flow end cap and nickel-plated front stinger
Please contact us for availability information
$184.95
CRF250L '13 - '16

Designed to enhance the appearance of your motorcycle, yet provide greater riding distance per tankful. Larger capacity than stock, yet very slim and sleek. Perfect for the dunes or the race track! These tanks are made with POLYETHYLENE CROSSLINK for extra strength and durability.

Ships same business day
$411.95
CRF250L '13 - '16 XR250R '96 - '04 XR400R '96 - '04 XR650L '93 - '25 KLX250S '06 - '14 KLR650 '87 - '18 DR350 '90 - '93 DR650 '96 - '25 DRZ400 '00 - '03 DRZ400S '00 - '25 DRZ400E '00 - '07 DR350SE '94 - '99 DR350 '90 - '99

An excellent replacement for the stock fork boots. These are great for protection from dirt, rocks and other contaminants. These boots utilize the latest advances in material technology to adapt to fork and styling demands. These high quality fork boots are 1/4 the price of the OEM factory replacements.

Choose black, blue or yellow.

Ships same business day
$29.95
KLR650 '87 - '07

Race Tech has developed these fork springs specifically for the heavier weight of the KLR650.
Sold in pairs.

  • The .43 springs are 7% stiffer than stock and will be a great choice for most riders
  • The .48 springs are 17% stiffer than stock and will be a better choice for heavier riders
  • The .52 springs are 30% stiffer than stock and will be a good choice for loaded adventure bikes or very aggressive riders

These will not fit the Tengai model.

Choose Spring Rate
Please contact us for availability information
$149.95
XR650L '93 - '25

A stiffer shock spring will help you get through the whoops or just help handle that extra baggage on the rear.

Stock spring rate is 10.5 KG/mm

*Spring color may vary due to specification requirement and availability.

Please contact us for availability information
$149.95
DR650 '96 - '25

Twin Air's high quality materials and superior construction deliver unbeatable performance and protection. The hands-down choice of more World and National Champions than all other filters combined.

Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles-without restricting airflow.

Ships same business day
$35.95
Universal fit. May require additional adjustment or modification.

The Barkbuster LED Indicator Lights for Jet, Storm & VPS Plastic Handguards to increase your visibility and safety using 15 high intensity LEDs that mount directly to the plastic handguard shells. Super bright auxiliary signals will make your directional intentions clear to upcoming traffic. The LED indicators are very low draw and E marked for road use.

Features:

  • High intensity LEDs with amber lenses
  • Intended for use as indicators/turn signals
  • E mark approved for use as an indicator light
  • 15 LEDs per indicator amplifies your visibility to other traffic
  • Enhances safety by imrproving clarity of planned directional changes
  • Very efficient performance with low power draw
  • Designed for use on the upper surface of Barkbusters Jet handguard plastics
  • Compatible with the upper and lower surface of VPS & Storm plastics

What's in the box:

  • Barkbusters LED indicators in amber (pair)
  • Mounting materials
  • Installation instructions

Please Note: Not compatible with the electrical system on the Honda Africa Twin CRF1000L

Choose Color
Add Resistor Set
Ships same business day
$74.95
Universal fit. May require additional adjustment or modification.

The Diablo delivers six liters of rider-friendly on-bike storage by following Giant Loop’s strict design objectives to build minimalist, slim and trim tank bags that seamlessly integrate with the motorcycle. Even when standing on the footpegs while riding off-road, the Diablo never gets in the way thanks to its unique size, shape, and mounting position behind the gas cap using their secure universal harness mounting system.

Fuel fills are a breeze with the Diablo: unzip the tank bag from the harness for quick and easy fuel access. Add to that, electronics pass-throughs integrated throughout each compartment, a full-length interior lining with hook-and-loop-accepting fabric compatible with many camera bag dividers, and included waterproof Giant Loop Tank Bag Dry Pod; the result is a bulletproof adventure-ready tank bag.

Ships in 3-5 business days
$288.98
CRF150R '07 - '18 CRF250R '04 - '25 CRF450R '02 - '25 DR650 '96 - '25

R&D introduces "Flex-Jet", a simple, effective flexible shaft design. Quick adjustments are now within easy reach. Besides easy access, another benefit is the Flex-Jet's ability to hold its setting. Loose fuel screws are now a thing of the past. Kit includes: Flex-Jet (Remote Fuel Screw), bracket, screw, spring, washer, O-ring and instructions.

Not for the stock DR650 carburetor Fits FCR-MX conversions Only.

Please contact us for availability information
$39.95
KLR650 '87 - '07

Innovative design makes tool easier and more secure to use than old fashioned pin-aligned drivers

  • Knurled anodized aluminum locking ring
  • Perfectly weighted to drive seals
  • Carbon steel body halves
Choose Year
Add Fork Seal Kit
Ships in 3-5 business days
$52.95
KLR650 '87 - '07

New replacement rear fender for the Gen 1 KLR650.

Available in 4 colors.

Ships same business day
$111.95

Custom made push/pull cable set for the Honda XR650L.

These are for use with the stock throttle assembly, when mounting a Mikuni push/pull pumper carb, or Keihin FCR series carburetor.

Available as +3" and +6" over stock length, with stock style throttle side fittings.

Sold in a set as shown.

Choose Length
Ships same business day
$39.95
KLR650 '87 - '18

This is a new gasket for the cylinder head - head pipe junction. Installing a new one with your new header will ensure a good seal and no exhaust leak.

Ships same business day
$8.95
Universal fit. May require additional adjustment or modification.

The well proven, premium Dual-Sport tires now sized to fit SuperMoto wheels. Easier and less expensive tha n lacing up dedicated off-road wheels for your SM. Aggressive tread knobs for bite in the dirt. Sticky rubber for traction on the pavement. This is a great tire that can make your street Motard into a Do-It-All ride.

Ships same business day
$284.95
Universal fit. May require additional adjustment or modification.

The TKC80 has a self-cleaning tread pattern along with high levels of side stability on soft surfaces with very good road handling manners. It is also original equipment on BMW 1200 GS Adventure and KTM 690 Enduro R.Some of the tires are designated as tubeless type. Please note that Tubes can be run in Tubeless tires, but a Tube Type Tire cannot be run Tubeless.

Limited size availability, due to manufacturer supply delays.

Please contact us for availability information
$189.95
  • An on-bike GPS system with all the features you've come to expect from Trail Tech
  • View, Organize, Edit and Share Entire Trail Systems in 3D
  • Designed Specifically to Meet the Needs of Off-Road Riders
  • 240x400 LCD display - Readable even in Intense Sunlight
  • Crash Resistant, Off-Road Design
  • Upload Routes from any GPS
  • Customizable User Screens
  • Accurate Tracks, Even in the Toughest Terrain
  • Runs on Vehicle Power (or internal battery)
  • Back-lit for Operation in the Dark
Ships in 3-5 business days
$289.95
WR250R '06 - '18 WR250X '06 - '11

The Rally windscreen from Parabellum is the perfect protection from wind and debris without sacrificing technical off-road capabilities. This is an upright rally type windscreen that looks aggressive and performs well under all types of riding. Designed primarily for the off-road / dualsport enthusiast, this shield keeps pressure off the rider's chest while commuting from home to adventure and back.

Mounting is accomplished by drilling two holes on each side of your headlight cowl using the provided template. 13.5 inches tall, 11.5 inches wide at the bottom, and 8.5 inches wide at the top. Made from military aircraft grade cast acrylic.

Choose Tint
Ships same business day
$98.95

PMR side utility racks are great for strapping down your soft luggage and keeping it off the rear plastics and exhaust pipe, while adding plenty of new tie down points for any luggage you have on your seat or tail section. They also add an enhanced level of security and strength to the rear end of your motorcycle in the event of a tip over or crash. 

Sold as a pair.  Easy to Install

  • Complete with all necessary mounting hardware
  • Fabricated with 1/2 inch steel tubing, MIG welded
  • Finished with a semi gloss black industrial grade powder coat
  • Comes with left and right side racks, each side weighs 2 lbs

The CRF300L side racks are intended to work hand in hand with their ENDURO Series rear rack. 

If you plan on installing the side racks without their rear rack, you will need the spacer kit to fill in the empty space, which we will send to you at no extra cost. Please select the option when you place this in your cart.

Please note that you will need to remove the left side rack to access your lockable factory storage hatch.

Add Spacer Kit
Please contact us for availability information
$159.95

Easily turn your blinkers into additional running lights and brake lights (rear) for added visibility.

White light in the front and red in the rear. Rear red running lights and bright red brake lights. You can omit the running and brake lights if you wish and still have the best blinkers on the market.

Dazzling bright Amber blinker functions. 

All in a spring-loaded stock to prevent damage from a tip over, crash or impact with brush, trees etc. They will bend 360 degrees, but are stiff, durable and nearly unbreakable.

Yamaha T7 Specific plug and play kit using factory connectors, flasher and block off plates included.

2024 T7 setups coming soon

Please contact us for availability information
$265.94

Designed to enhance overall performance when installing a high-flow jet kit. This CDI box enhancements include:

  • Duplicator circuits
  • Increased RPM redline
  • Altered ignition advance curves

This unit may also be used to replace a defective CDI box on a stock machine. For 1990 - 2007 models only.

Ships same business day
$129.95

PMR side utility racks are great for strapping down your soft luggage and keeping it off the rear plastics and exhaust pipe, while adding plenty of new tie down points for any luggage you have on your seat or tail section. They also add an enhanced level of security and strength to the rear end of your motorcycle in the event of a tip over or crash. 

Sold as a pair.  Easy to Install

  • Complete with all necessary mounting hardware
  • Fabricated with 1/2 inch steel tubing, MIG welded
  • Finished with a semi gloss black industrial grade powder coat
  • Comes with left and right side racks, each side weighs 2 lbs
  • The TW200 side racks are intended to work hand in hand with our ENDURO Series rear rack.
Please contact us for availability information
$159.95
Universal fit. May require additional adjustment or modification.
  • A tool to keep open up the bead when replacing a tube.
  • Works smoothly even with the toughest beads.
Ships same business day
$14.95

 The Powercore 4 spark arrestor muffler. FMF developed the Powercore 4 to increase the horsepower and torque throughout the entire power curve. Highest quality packing for long life. Removable spark arrestor included. Louder than the Q4. Approximately 99db stock or about 94db with optional Quiet Insert installed.

  • Uses long-life muffler packing for increased packing life
  • Forest Service approved spark arrester
Backordered: Waiting for stock from suppliers to fulfill orders placed on or after April 2024
$399.95
KLR650 '08 - '18

Finally! Quality replacement body parts at a fraction (35%!) of the OEM parts. Polisport's parts have been developed with their exclusive technologies - IPD (In-mold Plastic Decals) and DGP (Durable Gloss Propylene). These processes make these parts even more resistant and durable than the stock units with a perfect fit and glossy finish. The Side Panels include heat protection film, washers and rubber grommets, just like the OEM parts.

You can purchase individual parts, or a discounted complete kit. If your taillight unit was damaged with your rear fender, we offer a brand new OEM unit as an optional add on.

Choose Kit
Add Brake Light / Taillight
Ships same business day
$699.95
KLX230 '19 - '25 KLX230R '19 - '25

Kouba lowering link will lower the rear 0.75" - 2.25". Comes with bearings and seals installed for a quick and easy installation. Instructions included.

Comes with “H” linkage and aftermarket shock clevis for additional lowering. Each can be used together, or individually.

Note: We recommend all customers have a dealer install the shock clevis, as the stock clevis is difficult to remove.

Sold as a kit, lowering amounts shown below.

CLEVIS ONLY0.75"
LOWERING LINK ONLY1.50"
LOWERING LINK WITH CLEVIS2.25"
Please contact us for availability information
$219.95
XR650L '93 - '25 XR600 '88 - '01

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

The Complete Seat comes with an aftermarket pan with the foam and cover kit assembled, ready to ride.

Width:11 1/8" (283mm)
Height:Same as OEM
Custom-made to Order: Please allow 3-4 weeks for delivery.
$329.95
TW200 '87 - '00

Direct replacement OEM front brake cable for TW200 with drum brakes.

Ships in 3-5 business days
$53.95
DR650 '90 - '25

Replacement rubber boot for choke knob assembly.

Ships same business day
$4.95
WR250R '08 - '18 WR250X '08 - '11
  • Increased air flow over the stock air filter
  • Designed to increase horsepower and throttle response
  • Easily fits inside the factory air box
  • Larger surface area over foam filters which offers longer service intervals in dusty conditions
  • Four layers of premium cotton gauze provides outstanding filtration
  • Washable & re-usable, never wears out
  • One filter will last the lifetime of your bike
Choose Model
Add Air Filter Care Kit
Ships same business day
$70.95
KLX140(R) '08 - '25 KLX140L(RL) '08 - '25 KLX140G(RF) '08 - '25

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

Available as a Foam and Cover Kit for OEM pan only.

Width:8.5" (216mm)
Height:Same as OEM
Custom-made to Order: Please allow 3-4 weeks for delivery.
$229.95
WR250R '08 - '18 WR250X '08 - '11

DRC is one of the leading manufacturers of silicone hose kits for motorcycles.

  • Durable silicone radiator hose for dirt bikes
  • Available for MX, ED racers and street dirt bikes
  • Smooth inner diameter allows for increased coolant flow
  • Printed white DRC logo. Available in red or blue colors
Choose Color
Ships in 3-5 business days
$62.95

B&B Off Roads Honda XR150L bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.

Choose Finish
Ships same business day
$227.95

A sturdy and compact tail rack formed from 1 piece of structural 5mm thick alloy plate. Mounting utilizes the rear factory mount and their hidden sub-frame mount bracket.

Please note a small notch on the inner black plastic guard is needed to mount bracket.

The rack comes pre-threaded for optional luggage plate attachment. 

  • Comes in polished or black PPA coating.
  • All hardware for mounting is included.
  • Made from 5mm thick cnc machined plate
  • Weighs 1kg
Choose Finish
Please contact us for availability information
$265.95
Universal fit. May require additional adjustment or modification.

ProTaper Pillow Top Grip with 3-D (Tri-Density) Technology.  Try the grip with the technical advantage of three dedicated rubber compounds.

The difference between the original Pillow Top and the Pillow Top Lite is the overall diameter of the grip surface. The Lite offers a smaller diameter so the grips don't feel as large reducing fatigue in your hands while riding.

  • Vibrasonix pillow top reduces vibration and cushions impact. 
  • Inner core compound perfects the bonding interface with bars. 
  • Anti-Rip Tip™ uses denser compound to increase life of grip. 
  • Designed to self-clean and shed mud away from outer surface. 
  • Tacky gel-like surface compound is perfect for the trail and MX.
Add Grip Glue
Backordered: Waiting for stock from suppliers to fulfill orders placed on or after April 2024
$13.95

The genuine factory shop service and repair manual. This is the reference manual Suzuki dealers use in their service departments. It has all the necessary info to do any maintenance or repairs to your DR650.

Ships same business day
$96.95
Universal fit. May require additional adjustment or modification.

Slack control has never been more convenient.

Simply slip the webbing through the slots and use the shock cord to secure the slack.

You can roll the webbing around the Web Dominator or you can bundle the webbing and secure it by snapping the shock cord around the built in anchor.

Sold in a package of 4.

Ships same business day
$7.95
CRF250L '13 - '25 DR350S '90 - '93 DR350SE '94 - '99 DRZ400S '00 - '25 DRZ400SM '00 - '25 KLX250S '06 - '25 990 Adventure '07 - '13 950 Adventure '03 - '06 WR250R '08 - '18 WR250X '08 - '11 XT250 '08 - '21 V-Strom (DL650) '04 - '25 V-Strom (DL650) '03 - '25 CRF250L Rally '17 - '25

The SignalMinder unit is designed as a plug-in accessory for many Japanese bikes. SignalMinder uses a microprocessor to cancel the turn signals at one of three selectable time outs; 10, 20 or 30 seconds.

You can also make it so that all four of your signal lights also act as running lights and establish a dual-channel system on your bike. With the dual-channel system, when you activate the RIGHT turn signal three times in succession, you get 4-way hazard flash lights.

Connecting the 12 volt supply from the brakes to the SignalMinder, also allows for a brake flash option.

There are many options and configurations using this electronic tool.

No wire cutting required. The kit includes Scotchlok connectors to tap into existing wires.

Choose Relay Plug Type
Please contact us for availability information
$109.95

Make the Edge-2 installation as easy as possible with an Optional Connector Set. This allows you to put an OEM style connector on the Edge Taillight making the connection simple. Stock plug will go right into this unit and off you go. Will need a crimp tool or set of needle nose pliers to crimp connectors on.

Ships same business day
$5.95
Universal fit. May require additional adjustment or modification.

This Super Siphon has  a (1/2 inch x 6 foot) long hose, which makes it quite easy to transfer fuel from one bike to another! Simply, shake the hose to prime it and get fuel moving. The hose is resistant to gasoline and any other hazardous chemicals. Roll it up, stuff it in your bag and you will be very happy whenever you need it.

Ships same business day
$22.95
Universal fit. May require additional adjustment or modification.

Maintain your chain or sprocket, even change your rear tire or wheel while out on the road without the need for a center stand, with the BikeMaster Liftstick. Handy and convenient to carry. Perfect for street, dual sport and trail use. Liftstick includes non-slip rubber boots, which protect your motorcycle's swingarm from any scratches while claws at the base provide traction and stability during use.

  • Made of heavy-duty steel with a powder-coated finish.
  • Available in black or red.
  • Extends from 12.5" - 18"
Choose Color
Ships same business day
$36.95

Here is the O-Ring that fits in the carburetor manifold. This is the manifold that holds the carb up to the cylinder head. The O-Ring mounts between this manifold and the cylinder head. When this O-Ring fails it allows air into your cylinder and makes your Air Fuel ratio too lean which causes the engine to run too hot.

Ships same business day
$12.95
KLX140L(RL) '08 - '25

Custom developed by BBR Motorsports for the ultimate upgrade for mini four-strokes. Sized perfectly for fast/aggressive adult mini riders. This is the most important upgrade you can make for an adult sized rider. The stock suspension is too soft for most adults.

  • 30% stiffer than stock
  • Preset and stress relieved for long life
  • Custom wound from aircraft quality spring steel
Choose Model
Ships in 3-5 business days
$99.95

Seat Concepts dual-sport/adventure seat-kits incorporate a wider seating area for the rider, which results in more even weight distribution, while reducing pressure points.

Each kit contains detailed instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price. 

Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!

Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan.

Width:10.5" (267mm)
Height:Same as OEM
Add Kit
Custom-made to Order: Please allow 3-4 weeks for delivery.
$229.95
DR650 '96 - '25 DRZ400S '00 - '25 DRZ400SM '05 - '25 DRZ400E '00 - '07

These tips are for the Warp 9 Shift Levers only. These are held to the cast Warp 9 lever with a pin and e-clip making them easy to change out. Includes new pin and e-clip in case you lose yours.

You can also order just a new pin hardware kit which comes with new pin and clip.

Ships in 3-5 business days
$11.95
DR200 '86 - '25
  • Made from 4mm thick aircraft aluminum
  • Oil drain hole for easy access
  • All mounting hardware included
Ships same business day
$115.95
DRZ400S '00 - '25 DRZ400SM '05 - '25

Hard anodized oval shaped aluminum muffler with a TIG welded reinforced muffler bracket and red powder coated stainless steel end tip. Sleek muffler design gives you lots of clearance and it has a removable screen-type USFS approved spark arrestor. Unit is pounds lighter than stock and gives gains in horsepower and torque throughout the RPM range. All of that in a package handmade in the USA with a 1 Year Limited Manufacturers Warranty.

Choose Model
Add Anti-Seize
Add Exhaust Gaskets
Ships in 1-2 weeks
$369.95
CRF300L '21 - '25

Their best selling product to protect your bike, Flatland Racing skid plates are made from 5052 3/16" aluminum plate.

They are all hand tig welded together with side engine guards. Installation is easy with our clamps that grip tight.

Their skid plates offer clean out slots and oil plug hole, making oil changes simple. These are more durable than carbon fiber and plastic.

Mounting hardware and instructions included.

Note: Will not fit the CRF300L Rally

Choose Model & Finish
Ships in 1-2 weeks
$129.95