FRITZCO front sprockets are a straight up no hassle installation. Their sprockets are machined from alloy steel that in every way is comparable to OEM Yamaha and the best offered by other manufactures. The sprockets are then given a heat treatment that provides a compatible sprocket for the Yamaha output shaft and longest chain wear life possible.
Providing unbeatable performance and exceptional value, Hiflofiltro is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.
You pay $3.40 per filter with our value 10-pack!
A kit that includes an Axle Wrench combo for your bike with a 19mm for the front, and a 24mm for the rear. Just 7 1/2" long, it is long on leverage, but short enough to fit in even the smallest tool kit.
Also includes a pair of 'trail size' small tire irons.
This is a universal tank bag that is ideal for the rider who truly enjoys creek crossings and riding in all weather conditions but, does not want a bulky tank bag. The inner liner is a nice bright yellow to help you find items easier. The outer construction is double layered 840D nylon TPU. It is resistant to tears/cuts and is seamlessly welded at high frequency to guarantee maximum impermeability. The dimensions are 10.6"L x 9"W x 6.7"H
Benefits:
- IP65 Waterproof Bag
- Water resistant zipper
- Clear map / tablet pocket
- 6 Liter capacity
- Reinforced sides
- Reflective logos
- Universal fit
- Map pocket is separate from inner pocket
- Anti-slip base
- 24 Month guarantee against defects
- Constructed with sturdy ballistic fiber material
Precision tolerances – The tightest in the industry. Ultra-lightweight, for reduced unsprung mass. Straight rate springs will give better control in the rough stuff. Sold in pairs.
- The .85 springs are 30% stiffer than stock DL650 springs and 21% stiffer than DL1000 springs, a great choice for most riders.
- The 1.0 springs are 50% stiffer than stock DL650 springs and 42% stiffer than DL1000 springs, a better choice for heavier or aggressive riders, heavy loads, 2-up riding, etc.
- Stock spring rates for comparison: DL650-.65 DL1000-.70
“Extras” are a common factor before and during any adventure. “Extras” are defined as items that either lose their organized place or are simply acquired during a trip. The OBR ADV Gear Extras Pouch is the perfect solution for these miscellaneous items. The OBR ADV Gear Extras Pouch helps to keep these items within easy reach as standard storage that needs to be accessible during the day or as simple overflow.
Features
- Heavy duty industrial material construction with high strength UV resistant nylon webbing
- Heavy duty #10 coil zipper that won’t jam up in the dust
- Protective foam padded bottom
- External reflective webbing with universal Molle loops
- Base webbing loops as alternate attachment option
- Pouch dimensions 6” x 14” x 3.5”
- Attach to existing soft luggage or as a top lid pouch for hard side cases
A premium billet sprocket carrier from Warp 9 Racing that houses 2 bearings to help protect against the sideways twisting load that is commonly known to prematurely wear out the bearing and cush rubbers. This wear can cause extreme failure possibly damaging the hub.
Offered in anodized Silver or Black, Includes spacers and hardware.
These are only recommended to work on Warp 9 hubs.
Folding tip, forged aluminum shift lever from BBR Motorsports. Stronger and lighter than the stock shift lever.
- Bolts directly to the shift shaft, eliminating the need for the stock linkage which can get sticky and is prone to collecting mud
- Strong forged aluminum construction
- Steel knurled folding tip (chrome plated)
- Anodized titanium finish
- 1" longer than stock
Patented fork seal features a balanced 3 lip design that evenly distributes the pressure reducing operating temperature, wear and friction
Custom Elastomer Fork Seals have been tested to outlast OEM fork seals. Extends typical seal life by 3 to 5 times over OEM seals
Stiction (friction) measures from 1/3 to 1/2 less than OEM seals for smoother fork action
Lower Stiction, Longer Life! It doesn’t get any better than this!
Plus, the only complete line of dust wipers! Wipers should be replaced with the fork seals to assure peak performance.
Kit includes Fork Seals and dust wipers.
The EVO R series draws on our rich heritage of making power. Offered for various off road MX and sport ATV models, the EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.
- Hard anodized oval shaped aluminum muffler
- TIG welded reinforced muffler bracket(s)
- 304 stainless steel mid pipe / head pipe
- Red powder coated stainless steel end tip
- Lighter than stock exhaust system
- Huge horsepower and torque gains
- Sleek muffler design allows for maximum clearance
- Removable screen-type spark arrestor included
- Handmade in the USA
- 1 Year Limited Manufacturer’s Warranty
An Oil Cooler Guard we can get behind. Laser cut from 0.125" thick 5052 aluminum, CNC formed and powdercoated black.
Designed to fit the stock mounting holes perfectly, most riders will have this in place in minutes. Don't get stuck in the middle of nowhere with a punctured oil cooler.
- Engineered to keep your chain clean and lubricated under the harshest conditions
- The triple action formula cleans, lubricates and protects your chain - no matter if it's a standard or O-ring chain
- Engineered to adhere to your chain, on or off-road, and lasts long during those epic adventures
- The biodegradable solvent carrier helps clean chain and aids delivery of oil to micro-pores in chain
- Biodegradable oil penetrates and adheres to metal for an efficient, long-lasting lubricant
- Biodegradable wax seals in oil and keeps dirt off of your chain
- Biodegradable and non-toxic
- Available in 12-ounce (EU: 354,88 ml) aerosol cans
Stainless steel can and carbon fiber end cap.
- Trapezoid-shape muffler
- Maximized internal volume
- Straight, single core baffle
- Low-volume sound insert capable
All Street Series systems are Slip-on / Bolt-on applications that do not require tampering with the vehicle's emissions control system.
Thick carbon fiber plate with many advantages over aluminum.
The use of anti-ballistic composite material provides a longer fatigue life and greater tensile strength than aluminum.
Composite plates are molded to the exact shape desired, making for a closer fit and a more protective plate.
Composite plates absorb vibration and do not amplify sounds like aluminum plates do.
When hit hard, aluminum permanently deforms, bending frame tubes and slicing into water pumps.
Composite plates will bounce back from hard hits and look great long after aluminum plates give up.
Skid plates protect the side engine cases and the water pump in addition to the frame and the center case.
Designed with a high front to keep mud from building up on the engine.
Mounting hardware included.
Replacement front fender by Maier that will fit great on your TW200.
- All Maier bodywork is made of tough, vacuum-formed high-gloss polypropylene
- Drilling is required
- Colors are OE color matched
Note: The proper way to install this front is to install the stock fender bracket to the under side of new Maier front fender using stock screws and nuts.
The long awaited Wide Ratio Transmission from Nova Racing. Now you can have your trail gearing without giving up your highway gearing.
Both sets are lower than stock in 1st and 2nd gear and taller than stock on 3rd thru 5th gears. Not only will Nova give you better gear ratios but the high quality components will shift smoother and engage more solidly. The tables below show each gear ratio and the original OEM ratios for comparison.
To help put the ratio changes into perspective switching from the OEM 15T to a 14T sprocket lowers the gearing by 7.1% in all gears. Switching from a 15T to a 16T raises the gearing by 6.6% in all gears.
Stock | Gearing | Ratio |
1st | 12/29 | 2.42:1 |
2nd | 16/26 | 1.63:1 |
3rd | 21/26 | 1.24:1 |
4th | 21/21 | 1.00:1 |
5th | 23/19 | 0.83:1 |
The "A" gear set has an 8% wider gear ratio spread than stock.
"A" Set | Gearing | Ratio | From OEM |
1st | 12/30 | 2.50:1 | -3.3% |
2nd | 16/27 | 1.69:1 | -3.7% |
3rd | 19/23 | 1.21:1 | 2.3% |
4th | 22/21 | 0.95:1 | 4.8% |
5th | 24/19 | 0.79:1 | 4.3% |
This product is not eligible for promotional pricing or discounts
Cogent Drop-in Dynamic Cartridges will vastly improve both the compression and rebound damping of your stock forks. Designed by Rick at Cogent Dynamics on his high-tech suspension dyno, then tested and endorsed by KLR owners all over, these units have been given the seal of approval by the ProCycle staff for both performance and ease of installation. No disassembly of your forks, no drilling of damper rods. Just change the oil over to 5w and install the units under the springs and hit the trails.
If you weigh up to 250 pounds, select the .64 spring kit. If you are over 250 or carry lots of luggage, please select the .70 spring kit. Please call if you have any further questions.
All of these kits include DDCs, springs, fork oil and preload spacers.
The Shorai LFX Standard Recommendation is the best overall pick for most applications, and has been selected to give strong cranking performance and long lifespan.
- Capable of holding a charge for up to one year without maintenance
- Two to four times the life of lead-acid batteries
- Carbon Fiber Composite case
- Stronger cranking for better starts
- Environmentally friendly, just discharge and dispose
- Ultra light and compact
Measures 4.45" x 3.5" x 2.28"
Weight (lbs): 1.52 lbs
Weight (kg): 0.69 kg
Cold Cranking Amps: 210
Polarity: [+ -]
Each Shorai battery includes self-adhesive foam panels to achieve a snug fit in your battery box.
This is a complete high-performance intake kit for the DR650 that includes our famous TM40 carburetor kit and a K&N air filter with ProCycle wrap.
- TM40 Carb pre-jetted and set-up for your particular DR650
- Custom throttle cables to work with the TM40
- Extra jets should you need them for fine tuning
- K&N air filter with
- Custom ProCycle outside foam wrap
- Computer-designed to achieve ultimate strength at minimum weight
- JT combines leading-edge technology with top materials to produce the ultimate quality sprocket range with unbeatable value
- Every sprocket meets or exceeds the highest possible quality standards set for the motorcycle industry
- Sprockets are heat-treated and bead-blasted to reduce material surface tension
- Unless noted, front sprockets are made with C45 steel and SCM415 chromoly steel alloy; rear sprockets made with top-quality-grade C45 high-carbon steel
Our complete foot peg assemblies. 1-3/4" lower than stock. No extra brackets that hang down below the frame. Easier on the knees. Wider platform Yamaha YZ style footpegs are stronger and give you firmer footing. Mount solid to the frame. No more 'droopy' feeling when standing on the stock pegs. Lowering your footpegs makes it easier to stand and less of a reach down to the bars when standing.
Now you can get our Low Pegs with MK4 Pivot Pegz or black Fastway ADV pegs (both Yamaha YZ pegs) installed!
Construction of these handguards feature heavy duty aluminum guards with colored plastic deflector shields. They offer great protection from those trees that jump out at you on the trail and the cold wind and rain you encounter on the street. They feature a deep bend on the outer bar end for maximum freedom of hand placement and high quality bar mounts on the inside.
Select your desired color.
Must add the corresponding size mounts to fit your handlebar.
For DR650 or other models with long levers add the optional universal fit Spacer Kit so you don't have to cut the balls off the end of your levers when installing these handguards. (May require additional adjustment or modification on some models.)
Please Note: These handguards do not fit the Yamaha T7
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
Complete seats are built by Seat Concepts on a new seat pan and come ready to be installed on your bike.
Width: | 10" (254mm) |
Height: | Same as OEM |
Twin Air Filter's patented design, high quality materials and superior construction deliver unbeatable performance and protection - and make Twin Air Filters the hands-down choice of more World and National Champions than all other filters combined.
The air filter is your engine's only protection against the elements, and your stock filter isn't up to the task. Replace it with a Twin Air-the #1 filter system proven on motocross tracks around the world.
Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles-without restricting airflow.
- Constructed of the highest quality 1045 high-carbon steel
- Exclusive heat treatment and quenching process for strength and durability
- Nearly all machines come equipped from the factory with this sprocket
- The strongest, longest lasting steel replacement sprocket available
A Radial tire specifically designed for small displacement sport bikes. Advanced belt design and Jointless Band (JLB) rear tire construction utilizes a continuously wound belt for smooth performance and a consistent tire contact patch. Aggressive sport-derived treat pattern for enhanced on-bike appearance.
These tires are all tubeless and H-rated (max speed of 130 mph)
IMS Products 'Adventure Tank' for the Yamaha WR250R/X. They call this an Adventure tank because it maximizes your capacity preparing you for those extended trips without the need to stop and fill up. This tank has a 2.75 gallon advantage over the stock fuel tank and it handles it well.
IMS made this tank to replace the stock radiator shrouds and keep the fuel down low for a lower center of gravity, improving the handling and stability of the bike. They also have installed a lift pump to allow the stock fuel pump to stay in the standard position while efficiently utilizing the entire capacity of the tank. It is available in Natural, Black, Blue, Red and White.
*Graphics For This Tank Are No Longer Available*
Wing Tank - Does Not Use OEM/Stock Shrouds
This new mirror screws into your stock mirror mount but can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price. Fits either left or right side.
Sold individually. If a set is needed, order two.
All Yamaha's will need a mirror adapter if you have the stock perch.
Mondo Straps are named after the classic motorcycle movie, "Mondo Enduro". When they set out on their world trip they had hard luggage on their bikes. By the end of the movie the riders that were still pushing forward were all using simple straps and some homemade dry bags. The simple fact is soft luggage is more durable off road than hard luggage.
The Mondo Straps Kit has been designed to work with or without their Uprising Soft Rack. These straps allow you to use any bag you want for luggage. When installed properly you will be able to thrash about offroad and your luggage will stay put!
To use the Mondo Straps make a girth hitch around any mount point on your bike. Next, thread the flat runner back through the heavy duty metal cam buckle and pull it tight. The Mondo straps are easy on and easy off. The integrated tensioner system will keep your luggage in place no matter what terrain your adventure takes you on!
Kit Includes:
- 2 Heavy Duty Cam Buckle Tension Loops
- 2 Four Foot Runner Loops
Slime Tube Sealant is formulated and tested for use in all tube tires. Once installed, Slime remains liquid and will not harden or dry out. Slime is guaranteed for 2 years.
As the Slime treated tube rotates, centrifugal force pushes the sealant to the tread area creating a layer of protection, repairing punctures as they occur and treating existing punctures. Slime is not intended for use in tubes losing pressure from sidewall punctures, bead leaks, damaged rims or faulty valves. Slime for tube type tires is not recommended for use in tubeless tires.
- Prevents and repairs punctures up to 1/8"
- Remains liquid inside the tire, coating the tread area as the tire rotates
- Non-toxic, non-hazardous, non-flammable, non-aerosol and water soluble
- Tubes treated with Slime can be patched with a conventional vulcanized patch using a bit of patience and care
Quality components at a great price.
- Standard Kit: Includes SS braided lines and EBC sintered brake pads.
- Standard Plus Kit: Includes SS braided lines, EBC sintered pads and an EBC Carbon Steel front rotor.
- Super Plus Kit: Includes SS braided lines, EBC sintered pads and EBC carbon steel front and rear rotors.
- Deluxe Kit: Includes SS braided lines, EBC sintered pads and an EBC Premium 320mm SM front rotor kit.
- Super Deluxe Kit: Includes SS braided lines, EBC sintered pads, an EBC Premium 320mm SM front rotor kit and EBC rear rotor.
The RAM-B-238U consists of a B size 1" diameter rubber ball on a 2.43" x 1.31" diamond plate. The plate has two holes 1.912" from center to center, matches the industry standard AMPS hole pattern and will connect to a large variety of RAM mounts and third party cradles.
- Increased air flow over the stock air filter
- Designed to increase horsepower and throttle response
- Designed to fit inside the factory air box
- Larger surface area over foam filters which offers longer service intervals in dusty conditions
- Four layers of premium cotton gauze provides outstanding filtration
- Washable & re-usable, never wears out
- One filter will last the lifetime of your bike
This is a great SuperMoto tire that has increased grip on wet roads, with a focus on low friction surfaces (such as city streets, worn tarmac, etc).
These have a compound solution that enhances chemical grip and adhesive properties in all different situations.
Metzeler's patented mixing process delivers a more homogeneous compound that emphasizes the chemical properties and results in more resistant to the wear process.
These are tubeless tires and V rated (max speed of 149 mph)
Waterproof first aid kit is the perfect size for your "Don't leave home without it" list.
Always keep your first aid kit handy and right where you left it. The Waterproof First Aid Kit easiliy mounts almost anywhere you need it with self-adhesive hook-and-loop mounts. Contents stored in a heavy-duty nylon bag, with waterproof zipper and special coating to ensure your supplies stay dry.
6 | Fabric Bandages |
1 | 2"x3" TEFLA Pad |
1 | Knuckle Bandage |
1 | 3"x3" Sterile Gauze Pad |
3 | Antiseptic Towelettes |
5 | Yards Adhesive Tape |
2 | Povidone-Iodine Betadine |
2 | 4"x4" Non-sterile gauze |
1 | single edge razor blade |
1 | Sunscreen |
1 | Splinter grabber |
1 | 2"x3" Moleskin |
2 | 2-packs Acetaminophen |
1 | Pair latex gloves |
5 | Yards conforming gauze |
1 | Sting relief pad |
1 | Triple Antibiotic |
1 | Instructions |
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
The Complete Seats come assembled with an aftermarket pan and ready to ride.
Width: | 13" (330mm) |
Height: | Same as OEM |
The Commuter shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but is much more dished out towards the mid-point to distribute rider weight over a greater area. the passenger platform has been built up to help prevent the passenger from sliding into the rider.
The Commuter seat is the best choice for extended pavement riding and mellow offroad. The unique shape and added width will provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
The complete fork upgrade kit - your choice of springs and Race Tech Gold Valves. Also includes a set of top quality fork seals and 5W fork oil to complete the job. Everything you need to transform your mushy stock forks into suspension that really works.
You can select from various straight rate springs or even progressive springs to customize the package to your needs.
Stock Spring Rate for XR650L: 0.44 kg/mm (stock)
An Old School design that works great on today's Dual Sport bikes.
The rubber compound is engineered for high grip and long-lasting tread wear.
DOT approved, tube type, and might be the best value in a DOT knobbie.
- Computer-designed to achieve ultimate strength at minimum weight
- JT combines leading-edge technology with top materials to produce the ultimate quality sprocket range with unbeatable value
- Every sprocket meets or exceeds the highest possible quality standards set for the motorcycle industry
- Sprockets are heat-treated and bead-blasted to reduce material surface tension
- Front sprockets are made with C45 steel and SCM415 chromoly steel alloy.
- Quality, design and OEM proven technology are the same as used for what is supplied to the motorcycle manufacturers
The Acerbis 2.0 Chain Guide Block easily replaces the entire OEM unit and ensures durability and high resistance to shock and wear from the chain.
Made of PA6, it is made of two parts that allow installation without removing the chain.
100% PA6 construction Weight: 200 grams
Shinko 700 Series tire features an aggressive 60% on-road and 40% off-road read pattern for good dirt riding performance, without sacrificing pavement grip. Other features:
- Aggressive tread pattern with drop lug construction
- Heavy-duty 4-ply carcass for durability
- Reinforced side knobs for cornering stability
- DOT approved
The correct spring rate for your weight will give a smoother more controlled ride. No more bottoming and better traction and confidence off-road.
8.6 & 9.6 springs require an adapter which is included
Recommended rates:
- Rider & gear up to 150 lb = Stock 6.5 spring
- Rider & gear up to 200 lb = 7.5 spring
- Rider & gear 200-275 lb = 8.3 spring
- Rider & gear 275-350 lb = 8.6 spring
- Rider & gear 350 lb & up = 9.6 spring
*Spring color may vary due to specification requirement and availability.
Provide protection for your motorcycle’s front brake and clutch levers with Barkbusters aluminum bar lever protection handguards. Designed specifically for the Tenere 700, these guards feature heat treated full wrap aluminum backbones that mount at two points on each side for strength. Prevent costly damage to your motorcycle with Barkbusters aluminum bar lever protection handguards.
Features:
- Two mounting points provide secure protection
- Full wrap guards
- Heat treated aluminum backbone bars
- Easy installation
- Compatible with all Barkbusters deflector guards (not included)
Add Plastic Handguards for a complete kit.
Fastway offers a large ADV peg that is 4.75" long and 2.25" wide. With these pegs you can adjust the camber with their patented FKMS Kamber bolt. ´Tilt´ your pegs to increase comfort, or to give better squeeze on your bike. These pegs come with two sets of F3 cleats (one standard, one long). You can order serrated or spiked cleats separately.
These Adventure pegs are offered in several colors, but some colors may require extra time, call for availability.
CNC machined oil filler cap with locking clip to keep it in place in the roughest conditions. The cap is pre-drilled and the locking clip is safety wired to the mounting tap with a section of silicon tubing, that will not melt or discolor, over the wire. First class all the way. Available in Silver, Black, Blue or Red.
The DG RST (Reduced Sound Technology) muffler is the quietest DG muffler and is designed especially for dual-sport machines (Just 84db @ 3200 RPM). A new baffle design dissipates sound waves reducing noise output in a very efficient manner. This new design also stretches out the time between muffler repacks. Included is a Stainless Steel mid-pipe, USFS Approved Spark Arrestor and a new Aluminum end cap.
Introducing the Zeta solid bushings to replace your worn out rubber bushings. We have tested these bushings on our own bike and we love them. No more sloppy handle bars. Plus, they add a little bling factor to your bike! Simply unbolt your bar mounts and swap the rubber bushings with these anodized billet bushings for a more stable handlebar feel.
Features:
- Solid cones for rubber bar mounted stock triple top clamps
- Provides direct control and prevents bar twist when falling down
- Comes in a set of 4 solid cones
- Made of A7009-T6 aluminum
Designed to enhance the appearance of your TW200, yet provide greater riding distance per tankful. This larger fuel tank has double the capacity of the stock tank at 3.6 Gallons, yet very slim and sleek. This tank has a custom design that will allow the use of OEM & Maier side covers. These tanks are made with POLYETHYLENE CROSSLINK for extra strength and durability.
Comes with New Screw Cap.
Requires OEM/Stock petcock and oval rubber grommets for install.
If you do not have the grommets or if your O.E. grommets are in poor condition you can add these to your tank order.
Keep your motor running right with a fresh plug.
A Dual Electrode spark plug will last longer than a single electrode plug because the wear is shared between the electrodes.
JT steel rear sprockets are manufactured using only the finest grade of C49 high carbon steel.
Two styles of rear sprocket were used on the DR350. The 90-95 'S' and 'SE' (street legal) models have a cush drive hub. The 96-99 'S' and 'SE' as well as all of the 'dirt only' models have a non-cush rear hub. Select your sprocket accordingly. If you are not sure, look at your bike. If the sprocket is bolted directly to the wheel hub you have a non-cush model. If your sprocket is bolted to a separate sprocket carrier you have a cush drive model.
A Dual Compound radial for performance street riding.
Tread surface divided into three separate areas featuring two different rubber compounds.
Softer shoulder rubber provides phenomenal cornering grip.
Lean angle up to 51.2°
Tubeless and W rated (max speed of 168 mph)
Kenda's Dual-Sport tire designed for the 80% on-road, 20% off-road crowd.
- DOT approved
- Unique combination of street and off-road grip provides maximum performance
- Strong and durable Nylon four-ply construction
- The advanced compound design gives better stability, cornering traction and braking control
- Tube type tire H-rated (max speed of 130 mph)
Keep your motor running right with fresh spark plugs!
NGK is one of the world's largest manufacturer of spark plugs, whose products are used as original equipment (OE) on countless motorcycle and automobile models.
- High-quality materials and superior construction for serious power and reliability
- Pure alumina silicate ceramic insulator provides high strength and better heat transfer
- Deep-seated copper core for a wider heat range
- Nickel alloy tip for longer life
- Trivalent metal plating provides superior anti-corrosion and anti-seizing properties
- Choosing the right high-quality plugs prevents fouling from running too cool and preignition from running too hot
- NGK plugs available for almost every application and riding style
Made from laser-cut, medical-grade, 304 stainless steel micronic filter cloth, this filter provides 200% more filter area over many paper filters, catching debris down to 35 microns. The FLO filter pleat seam is welded and able to withstand up to 600 deg. F. Filter maintains consistent flow under all conditions including extreme heat, the presence of water and cold start-ups where paper filters can flow so poorly that they often cause the bypass valve to open and allow unfiltered oil to enter your engine.
This cleanable oil filter should be the last one you ever purchase.
- Reduce exhaust sound by one to six decibels
- Options for DG V2 & RST and for the older "O" & "R" Series mufflers
- Easy installation; remove rear end cap and place Quiet Core in front of the spark arrestor
- Smaller diameter inserts are quieter but more restrictive; larger inserts are less restrictive but louder
- 1" Not recommended for RST
- Each size is sold separately
- Works with DG V2 & RST mufflers
- Designed to fit in the factory air box exactly like original filter
- The best selling replacement air filter for competition motorcycles and ATVs
- Unique two stage design allows for easy and complete cleaning
- Dual layer of foam, can be serviced separately
- Thin Ultra Seal base is virtually impossible to tear and has a built-in "Grease Groove"
If you already have a Quad Lock Case, you can Twist Lock and Go with any of these secure mounts.
The Quad Lock® Handlebar Mount is the ultimate smartphone mount for motorcycles, compatible with all Quad Lock® Cases including the Quad Lock® Universal Adaptor for other Android phone devices.
The Quad Lock® Handlebar Mount gives you the flexibility to mount your phone in a convenient and visible location using a rotating head and includes an extension arm if extra clearance is required. With your phone securely mounted to your motorcycle, you can use navigation apps to guide you to your location with ease and always stay connected.
Standard:
- Secure - Patented Dual Stage Locking Mount
- Convenient - Use Navigation Apps on the go
- Discrete - Small mount size
- Multiple Mounting configurations (360 degree arm rotation)
- Suits bar sizes ⅞” (22mm), 1” (25mm), 1-⅛” (28mm), 1-¼” (32mm)
- Compatible will all Quad Lock Cases and the Universal Adaptor
NOTE: Case not included
Motorcycle Vibration Dampener is recommended for use with this product.
Does your stock vacuum operated petcock not shut off when your bike is parked? Replace your stock vacuum operated petcock with this manual one. Must be shut off any time the bike is parked for more than a few hours. Fits stock or aftermarket tanks. Plastic tanks may need the hole 'ovalized' to fit the dual standpipes.
Does not fit OEM XR650L metal tank
Fly Racing medium tank bag has 11 liter capacity that expands to 20 liters.
Touch screen compatible top map/device pocket. Removable base with combined strap and magnet mounting system.
Reflective piping and logos, convenient carry handle, shoulder strap, and rain cover included. Measures: 14"L x 10.5"W x 7"H
The MotoPressor Puncture Repair Tool combines the four tools essential for tubeless tire repair into a single tool.
With the motorcyclist in mind, they've designed a "4 in 1 multi-tool" that uses pre-vulcanized repair strings and packs into a sheath measuring a mere 130 x 68 x 50mm, that's small enough to fit in your pocket. The tool contains a pair of pliers, a rasp, an insertion tool and a sharp knife, which is all you'll need to fix 99% of punctures. The repair strings are pre-vulcanized, so they've done away with the "little tube of glue". The repair plugs the hole AND leaves a "patch style" repair on the INSIDE of your tire.
If you'd like to see the tool in action go just click HERE, and watch the demo.
Quick day trips often necessitate the need for additional gear storage … the OBR ADV Gear Enduro Saddlebag answers this need with a creative downscaled design of the OBR ADV Gear Adventure Saddlebag. The OBR ADV Gear Enduro Saddlebag maintains the same fit and function keeping the load in close to the bike and forward for improved handling. OBR ADV Gears 10l Enduro Saddlebags are a great solution for packing extra tools, rain gear, or even overnight gear for those with minimalist needs.
Features
- 600in3 (10L) Capacity
- Heavy duty ballistic nylon construction with high strength UV resistant nylon webbing
- Heavy duty #10 dust resistant coil zipper with storm flap
- Padded inside/outside panels to protect bike and gear
- One size fits all design with adjustable seat cradle straps
- Versatile quick On/Off
- Generous use of reflective Side webbing for increased low light visibility
- Versatile Molle Loops for added tie down and attachment points
- Includes 1 ea. rear anchor strap to work with a rear cargo rack and 1 ea. gutter hook anchor strap to work with bikes without a rear rack
- Load centralizing design keeps load mass in tight to the bike and forward for better handling on and off road