Search Products

The Barkbusters 10 OHM Resistor Set for LED Indicator Lights will correct the flash rate of your auxiliary signal lights. Ready to plug in connectors make installation a breeze. These resistors are intended for Barkbusters LED Indicator Lights.

Features:

• 10 OHM
• Intended for Barkbusters LED Indicator Lights
• Corrects flash rate of LED signals
• Flash rate: 90 (+/- 30) times per minute

Here is everything you need to upgrade your TW200 front suspension. Kit includes: Heavy Duty Fork Springs, Cartridge Emulators, Oil Seals, Dust Seals, and 10w Fork Oil. Just choose the spring rate you want and enjoy your TW even more!

Stock Spring Rate is .50 kg/mm. The .60 kg/mm springs are 20% stiffer than stock while the .70 kg/mm is 40% stiffer than stock.

Installation requires disassembling your forks and drilling out your damper rods.

A replacement Clarke Gas Cap that fits most Clarke Gas tanks. Comes with rubber gasket.

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready!

This is the ENDURO Series DR650 rear rack which measures 10 inches wide and 12 inches long.

• Great for carrying cargo, duffel bags/backpacks, and mounting Pelican, Seahorse, or any other hard cases. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.

Your choice of an aluminum bolt-on foot pad or a steel weld-on unit. Each will make the footprint of the stock side stand considerably larger, preventing your DR from tipping over in soft terrain. The bolt-on unit is cut from aluminum and then powder coated black, it comes with stainless steel mounting hardware.

The bolt-on pad and does require use of a drill for installation. The weld-on pad will need to be welded to the stand and then the entire unit painted for corrosion protection.

Modern LED technology with a classic look!

This plug & play kit is built around the all new Holley RetroBright LED headlight which comes in three different colors.  

Choose from Classic White (3,000K), Modern White (5,700K), and Euro Yellow.  The RetroBright also features a replaceable bulb.
 

Low Beam: 25W, 2,000 Lumens
High Beam: 30W, 3,000 Lumens
Color Temperature: 3,000k or 5,700k
DOT Compliant
Beam Pattern: Left Hand Drive (USA)

• Save time and money with this complete OEM quality fork bushing kit
• Kits include fork leg and slider bushings along with any needed snap rings, o-rings and copper washers

The science behind the MegaBomb header may be FMF's greatest engineering accomplishment to date. You can bolt on a MegaBomb with an existing FMF Racing slip on for as much as a 3hp boost, plus the MegaBomb actually reduces noises levels by as much as 1.5dB. The MegaBomb technology is evolved to produce more low end to mid range gains as well as broadening out the mid to top end power gains over stock. MegaBomb is the next level technology you can have today.

• Produces long header torque and short header over-rev
• Reduces sound output as much as 1.5dB
• Increases output from stock motor as much as 3hp
• Stainless Steel Construction for durability

For FMF mufflers only

A quality set of replacement throttle cables from Motion Pro

The X-Grip is a frame guard that allows the rider to both protect the frame of the motorcycle from wear as well as adding more grip to the bike.

Made from a dual injected mold; The outer plastic is durable polycarbonate while the inner plastic is durable yet playable and offers incredible grip.

Available in 2 colors

The new Fastway Evolution AIR footpegs are now the ultimate pegs in the Universe.

Designed and sculpted out of the best 7075 Billet aluminum by Pro Moto Billet elite engineers and machinists. Featuring Fastway's Patented adjustable height, traction, and camber options, the Evolution AIR footpegs are superior in every way. Fastway Evolution AIR pegs are designed to shed mud and debris, while being ultra strong.

You can also order serrated or spiked cleats separately. See images.

These AIR pegs are offered in several colors, but some colors may require extra time, call for availability.

Acerbis fuel tanks were designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service.

Aftermarket foot pegs from our friends at Warp 9. Made from light weight T-6 aluminum and stainless steel teeth. These have an extra wide platform as well as the Exclusive "X" bridge that adds 2 center teeth for added grip.

Each kit includes all necessary rubber components and brake pins.

Twin Air's patented design, high quality materials and superior construction deliver unbeatable performance and protection - and make Twin Air Filters the hands-down choice of more World and National Champions than all other filters combined.

Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles-without restricting airflow!

Sintered Pads from EBC are the best pads we have found for the KLR, they provide good performance in all conditions yet still give you long pad life.

These sets include front and rear brake pads.

Wraps around your K&N filter to keep water and small particles out of the filter itself. K&N DryChargers are manufactured from a durable polyester material and are pre-treated with a proprietary hydrophobic process designed to prevent splashes of water or mud from saturating your K&N air filter. The DryCharger will also stop small dirt particles; yet add little restriction to the airflow of the filter. The DryCharger can be installed under the Foam Wrap.

Pre-filter only, K&N air filter sold separate.

High quality steel front sprockets

Top suspension performance requires firm bottoming resistance with plushness at the same time. Even the best suspension tuners can only make the stock valving design work so well. The Gold Valve Shock Suspension System is a proven bolt-on shock valving system that improves control, traction, performance and bottoming resistance.

B & B Off Roads Honda CRF300L bash plate is made from 4mm aluminium 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.

The Windscreens and Deflectors are made from 2.0mm Quantum® hardcoated polycarbonate, and the Windscreens are offered with either a plain edge or an E43R EU-compliant beaded edge. This high quality material, along with state-of-the-art manufacturing techniques, provides outstanding clarity, impact strength and scratch resistance unmatched by any windscreen maker worldwide. Quantum hardcoated polycarbonate is the material of choice for serious motorcycle riders. It is 10X more abrasion resistant than FMR hardcoated polycarbonate, and 30X more than windscreens made from commonly used acrylic or "aircraft plastic”. VStream gets its name from its unique patented shape. The advanced “V” profile and dimensional contours push the wind vortex out and away from the rider's helmet, resulting in a peaceful, quieter riding environment. VStream Windscreens are easy to install and are protected by a 3-Year Warranty against breakage!

Features:

• Fairing-mount VStream® Windscreens are designed specifically for each make and model to ensure optimum performance and perfect fit using the OEM mounting hardware.

Opens your throttle 15% faster. No more 'double handfuls' to get it wide open. Removable end cap for bikes with hand guards.

More range at a great price. Choose  the 2.7 gallon tank for the KLX250S in Black, Green, Natural or White.

  This tank will NOT fit the 2009-2015 models.

Providing unbeatable performance and exceptional value, Hiflo filtro is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.

You pay $3.90 per filter with our value 10-pack!

• An on-bike GPS system with all the features you've come to expect from Trail Tech
• View, Organize, Edit and Share Entire Trail Systems in 3D
• Designed Specifically to Meet the Needs of Off-Road Riders
• 240x400 LCD display - Readable even in Intense Sunlight
• Crash Resistant, Off-Road Design
• Upload Routes from any GPS
• Customizable User Screens
• Accurate Tracks, Even in the Toughest Terrain
• Runs on Vehicle Power (or internal battery)
• Back-lit for Operation in the Dark

The ProCycle rack system is designed and manufactured by dual-sport riders who know what it takes to create a durable and versatile luggage rack.

Components are constructed from mild steel tubing that is powder coated black for corrosion resistance and long-lasting good looks. Designed and manufactured locally in Oregon.

Our rack includes a custom sub-frame bracket that adds additional strength to allow for heavier luggage bags or cargo without long support arms or fear of damage to your TW sub-frame.

Multiple mounting points for various luggage and strap options. Top rack includes a mounting point for a rotopax mount (not included). Side panel guards keep your saddlebags from fouling the side covers, gives an anchor point for soft saddle bags, and helps keep bags from being damaged by the exhaust.

Top rack is 15in wide by 11in from front to back.

This set includes the ProCycle Top Rack, Side Panel Guards, and sub frame bracket:

OEM Suzuki headlight cowling.

Radial architecture that enables improved overall response and handling as well as unrivaled performance when compared with a same-size cross-ply tire. A 100% silica rubber compound delivers the best wet grip in its category. Derived directly from the radial Sport Touring ranges and a tread borrowed from the Pilot Road 2. Good for tubeless or tube type applications

 H-rated (max speed of 130 mph)

ThumbDogs turn any glove into a touchscreen glove. They were created so you don’t have to take off your gloves when you want to use your a digital touchscreen device such as, smartphone, GPS, e-reader, gaming console, ATMs, e-tablets, cameras, etc.

Made with medical-grade fabric, ThumbDogs is durable and reliable. It has the right amount of capacitive sensing so you can stay connected. And ThumbDogs will stay on your glove fingertips securely, thanks to their adhesive backing that is glove-friendly and weather-ready.

You can keep your favorite, comfortable pair of gloves. Just adhere some ThumbDogs to your existing glove tips and stay warm, stylish and connected. Instant touchscreen and texting gloves!

ThumbDogs come as a set of 4: Their special medical-grade conductive material enables you to interact with your smartphone. So easy to use – just peel off and attach them to your favorite glove tips, and start connecting.

Rebuild kit bearings are made using 52100 bearing steel

Our ProCycle top rack is designed and manufactured by dual sport riders that know what it takes to create a durable and versatile luggage rack.

Our racks allow for easy installation of both soft and hard luggage.

• 5/8" steel tubing
• Computer precision bending
• Durable powder coat finish
• CNC cut brackets
• Top rack dimensions 15" wide 11" long
• Top rack has RotoPax and hard case mounting tabs
• All mounting hardware included.

Top rack only, side racks sold separate.

For use with Quad Lock® mounts and accessories sold separately. If your phone is not listed, contact us for other model cases available or select the Universal Adaptor.

SECURE MOUNTING

Featuring a Patented Dual-Stage Lock that’s quick and easy to attach / detach, but secure enough to lift up to 80 kg / 176 lbs (yes, they've tested). It’s all in the technique, not in the force.

PROTECTIVE / IMPACT RESISTANT

We would never suggest throwing your device off a double story building, that’s just silly. But with a tough, polycarbonate core and impact absorbing TPU edge-to-edge outer shell, you can be confident that your device will be protected in your everyday activities.

SLEEK DESIGN

The slim profile and soft touch material make it perfect for everyday use. Simplicity is key in all of our design, no showboating here.

And yes, it’s compatible with wireless charging.

• Secure Quad Lock® interface
• Composite construction (TPU / PC)
• Microfibre lining
• Impact absorbing shell
• Compatible with wireless charging

Iridium spark plugs are made with premium quality materials.

Iridium plugs last longer than standard ones, meaning you won't have to replace them as often.

• The ultimate in the evolution of spark plug technology and performance from an industry leader
• The iridium electrode is 25% smaller than a platinum electrode, and it's just 1/4 the size of a conventional nickel electrode
• Ultra-small diameter center electrode reduces voltage requirement and extends ignition system life
• Metal shell plating has enhanced anti corrosion qualities

Sold individually, unless otherwise stated.

The GP-1 Dual Sport Tire from IRC is designed to provide the best possible handling and control for both on and off the pavement. Special knobs penetrate loose surfaces for excellent traction, braking and cornering off the road yet won't wear off as fast as a full knobby when used on the street. Features include:

• Innovative knob design offers excellent off-road bite
• Won't be shredded on the highway like full knobbies
• DOT approved, 4-ply tire 90% on road, 10% offroad
• All GP-1's are Tube type tires and P rated (max speed of 94 mph)

These Rider's Wrenches by Fredette are combination wrenches that have three wrenches in one! A 2-stroke size spark plug wrench - a front axle and a rear axle wrench. Yep, all three in one unit.

Available in the combinations shown that will fit virtually all current dual-sport machines.

Transform your ride
MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide. Better still, this dual-sport version pivots the shield down and forward to get it out of your way for off-road riding!

What's included in the kit
Their complete bolt-on system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.

• A set of MadStad adjustable dual-sport brackets
• The acrylic windshield

The MadStad brackets bolt to the top of your fork clamps and are completely free of the handlebars. You can adjust the shield for the optimum height, angle and airflow for comfortable street and highway riding. When going off-road you can leave your comfort adjustment as-is and pivot the entire system down and forward in front of the headlight so you can get it out of your face completely. When it comes time to hit the pavement again, simply pivot it back up and you are back in street riding comfort mode.

Made from 1/8" thick stainless steel with dual folded edges for additional strength, these brackets will relocate your passenger pegs down 4" and move them back 1.5". This will give your passenger additional legroom making two-up riding much more comfortable.

All hardware is included for a quick and easy installation.

PSR's  fin rear rotor protector. CNC machined from forged aluminum and then anodized gun metal in color. Just remove your existing caliper bracket and remove the pins, install them on this new one and then put the caliper and fin back on. It doesn't get much easier. In the event of damage to the fin, it can be replaced separately.

ProCycle side panel guards to keep your saddlebags from fouling the side covers. Constructed from mild steel tubing that is powder coated black for nice long lasting good looks.

Add Moose 20L Saddlebags for a very economical luggage solution.

Add Wolfman Rocky Mountain Expedition Saddlebags for a premium luggage solution.

A high quality replacement clutch cable.

• Increased air flow over the stock air filter
• Designed to increase horsepower and throttle response
• Designed to fit inside the factory air box
• Larger surface area over foam filters which offers longer service intervals in dusty conditions
• Four layers of premium cotton gauze provides outstanding filtration
• Washable & re-usable, never wears out
• One filter will last the lifetime of your bike

Low peg mounts from JNS Engineering. Your choice of a straight 1.5" drop or get that drop and a 1" rearward offset. You can use your stock pegs or click on one of the optional pegs that are made to fit the stock DR650 mounts.

These heavy duty steel mounts are pressed, welded and then powdercoated black for protection. Includes mounting bolts.

Note: These mounts are compatible with the SW Motech Center Stand by adding a 1/8" spacer behind the mounts.

• Protect your DR650 from overheating.
• Inline temp block kit works with Trail Tech computers Striker, Vapor, Voyager, Voyager Pro, and all TTO temp meters. 
• Installs between the oil cooler and top oil supply line, giving a cooled oil temp reading.
• Includes 3 new o-rings, and 2 longer bolts, as well as the Trail Tech m6x1.0 temp prob.

• Lightweight levers are CNC-machined from aluminum
• Reach to the lever is adjustable to six positions

The GP-110 Dual Sport Tire from IRC is designed to provide their most superior dual sport performance. It has great handling and control both on and off the pavement. Special knobs penetrate loose surfaces for excellent traction, braking and cornering off the road with a stable grip along the tire's mid-line for highway travel. Features include:

• Innovative knob design offers excellent off-road bite
• Wont be shredded on the highway like full knobbies
• DOT approved,4-ply tire 80% on road 20% off road
• Tube Type tire and S rated (max speed of 112 mph)

Fuel supplies can be sketchy at times. This filter lives in your tank to trap dirt and debris as it is poured into the tank. Features a custom shaped adapter that fits securely under the gas cap, creating a leak-proof seal. If it stays out of your fuel, it can't get into the carburetor! Created by the filter experts at Twin Air, this filter fits IMS,  Acerbis and Safari brand gas tanks.

Heavy duty shock bumper. The stock bumper is prone to disintegrating with age. If you are re-valving your shock it's a good idea to be sure the bumper is in good shape.

Use simple leverage to easily lift your dirt bike up on to a flat platform.

The platform angle adjusts easily so either wheel can be off the ground quickly and safely for work or cleaning. These adjustments can be made with the bike on the stand.

Folds up for easy storage and transport.

Adjustable legs for use on any terrain and allows for even lift height for any dirt bike.

*Closeout item, as is, no warranty.

Each pattern is available in three advanced synthetic rubber compounds. This means you can have the optimum combination of strength, tackiness and shock absorption to suit every riding condition and individual style. Soft grip is extremely soft, giving you a very comfortable ride, great feel and reduces the chance of blisters; however, because the grip is so soft, it wears quickly. Medium is a compromise between firm and soft. Firm grip has the same feel as a stock grip, it is very strong and has very good resistance to tearing and abrasion. Half Waffle has waffle pattern in finger area for traction and diamond pattern on palm side to reduce blisters. Full Waffle: designed after the CR Honda® grip.

The latest in muffler packing technology. Spec 31 high performance muffler packing resists breakdown up to 1400°F, is universal, and is easy to install.

• Kits come in 2 lengths - 15" and 19"
• Pillows can be trimmed to length to fit different mufflers.
• Includes a cap stuffer to fill packable end caps.

Geared for the do-it-yourselfer that already has a TM40 or HS40. This kit supplies everything you need to convert it for use on your bike.

Kit includes intake and air boot adapters, throttle cables, choke knob, accelerator pump nozzle, a wide selection of main and pilot jets plus a TM40 tuning manual.

This relay will fix your flash rate problem caused by aftermarket signal lights and/or integrated tail light. If your signal lights flash too fast or do not flash, this part is your solution! Plug and play - easy installation.

Only ONE relay is needed per motorcycle.

Features

• Slows signaling flash rate back to the normal rate when your bike goes into hyperflash state (or your signals stay on constantly)
• Plug and play installation: simply replaces the relay already on your bike
• Fits like OEM

This component works with the following signal configurations:

1. All stock
2. Stock taillight, aftermarket signals
3. Integrated taillight, stock signals
4. Integrated taillight, aftermarket signals.

No repacking required. The LeoVince X3 Enduro is made with TIG welded stainless steel internals and aluminum outer shell. It features a semi-direct chamber design that is maintenance free. It's quiet too! Our own in-house testing showed a 84dB sound level using the USFS J1287 testing procedure. That is a bit louder than stock but significantly quieter than other aftermarket mufflers. It includes a certified Spark-Arrester. This muffler requires a stock muffler joint gasket when used with either the stock headpipe or the FMF headpipe.

Yamaha uses this seal material in many places on several motorcycles. It is like weatherstripping and is used to seal up the edges in the TW200 air-box. It seals up the air-box so that water and grime can't enter the air-box from the side. Ensures that air entering the box comes from up under the seat.

This DRZ400 rear rack, hand-built by B&B Engineering in Australia is made from 4mm aluminium 5083 plate tig welded to the support tubing circumventing the plate. This material was chosen because of its extreme suitability for welding as well as abrasion and impact resistance, and all of this keeping in mind the full weight of the bike and rider. Once complete they are given a polished finish or coated with a super-durable black polymer. All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.

These racks are smooth and sturdy enough to use as a grab handle.

Check out the bolt-on Luggage Plate for the B&B Rack for those times you need to carry a larger load!

Their best selling product to protect your bike, Flatland Racing skid plates are made from 5052 3/16" aluminum plate.

They are all hand tig welded together with side engine guards. Installation is easy with their clamps that grip tight.

Their skid plates offer clean out slots and oil plug hole, making oil changes simple. These are more durable than carbon fiber and plastic.

Mounting hardware and instructions included.

This kit includes one OEM drive plate retaining wire & one OEM inner steel drive plate.

If you've ever changed the clutch on a DR650 you will be familiar with the extra steel plate at the bottom of the stack that is locked in place by a very thin metal wire.

Generally, when you do a clutch replacement on the DR650, you do not need to remove or replace these items. If you do need to (or if you have already) you will come to realize this wire is not very strong and is prone to breaking if not treated with care during the removal / installation process.

Silver in color

Upgrade your bike with a tapered 1-1/8" bar. Constructed of Aircraft grade 7065 T-6 aluminum that tapers to a standard 7/8" to accept stock controls.

• Lighter and stronger than regular bars
• No-crossbrace allows flex to reduce shock and rider fatigue
• Etched alignment marks for fast and accurate positioning
• Flex Series pad included

Progressive Suspension springs offer a soft initial spring rate for a plush ride. Progressively wound design provides increased resistance to bottoming as spring compresses. These springs are significantly stiffer than the wimpy stock springs. Spring rate spans the .45-.62 kg/mm range.

Sold in pairs

Contoured alloy hand guards with inner mounts, allow space for the clutch cable and brake hose.

Images show a set of these hand guards installed on a set of CR High Gunmetal Fly Handlebars with large black deflectors. The far right image shows the need to flip the brackets that attach to the bar on the clutch and front brake side. On the front brake side the clamp must go over the front brake line while on the clutch side it goes under the cable.

Note: This kit includes the handguards only. Deflectors sold separate, can be added by selecting color from drop down menu.

For DR650 or other models with long levers add the optional universal fit Spacer Kit so you don't have to cut the balls off the end of your levers when installing these handguards. (May require additional adjustment or modification on some models.) 

Highly efficient design delivers warmth faster than traditional heated grips.

Choose from the standard five level push button temperature controller, or the LCD display controller which shows the selected heat level and available battery voltage.

Dunlop designed the D606 tire to be street-legal but with an emphasis on aggressive off-road riding and great durability. A full-depth tread pattern designed for rigorous off-road use yields excellent traction on everything from hard-packed fire roads to soft single-track trails. At the same time, the D606's tread compound is engineered for good highway durability and grip.

The Dunlop D606 is R rated (max speed of 106 mph)

Spare Extension Cable Set for Shorai 12V LFX battery charger.

X3 EVO represents the off-road evolution: LeoVince has combined all its experience in the off-road world with cutting-edge materials and Italian design, enhancing freedom in its purest form.

The X3 EVO body is made of AISI 304 stainless steel with TIG welds handcrafted by specialized operators, to guarantee long-lasting performance. X3 EVO will allow you to face the most extreme environments and conditions because it does not fear water or mud, nor wear over time.

The LV logo is their tribute to a motorcycle culture that we have loved for 70 years and is laser etched on the body of the exhaust: it is as endless as their passion.

They manufacture the end cap in 100% real carbon, with their special 2x2 twill carbon fiber, specifically designed to resist high temperatures and make the X3 EVO even lighter.

The matte clear coating, in addition to enhancing the carbon texture, protects the end cap from wear and UV rays, keeping the X3 EVO always in a perfect shape.

The sound of X3 EVO is already unmistakable at low revs. X3 EVO has a direct interior, specially conceived to channel the exhaust gas in an optimal way, to unleash a deep sound, giving a new voice to your bike.

The X3 EVO's Spark arrester has been tested and approved by the United States Forest Service and is essential for off-road riding in compliance with regulations, with more peace of mind, more respect for the environment and more fun.

• Adapt 7/8" bar mounts to accept oversized 1-1/8" handlebars
• An economical alternative to replacing expensive top triple clamps
• Include mounting bolts.

Quality steel rear sprockets. Choose 525 or 520. 41T to 50T

48 and 50 sprockets require removal or modification of your lower chain guide.

Chain Size Recommendations:

• 110 link chain for a 42 tooth rear sprocket
• 112 link chain for a 46 tooth sprocket
• 120 link for the 48 and above sprockets.
• 120 link chain will have to be cut to the proper size for the 48 and 50.

*Actual sprocket color may differ from image shown.

Galfer USA produces several different brake pad compounds for all types of riding styles and uses. With over 60 years of friction material production and research, they have learned that one compound doesn’t always do the trick across the board. If you are just looking for an OEM brake pad replacement or a high performance race brake pad, they have you covered!

Set includes front and rear brake pads.

Hardened chrome vanadium steel with built in rubber insert to hold spark plug steady.

Thin wall bi-hex sockets designed to access narrow spark plug holes.

Fits 3/8" square drive and hex drive, 14mm, 16mm, 18mm, 21mm.

Included in this kit are fork springs, Cogent DDC (Drop in Damper Cartridge) performance cartridges and three bottles of 5w fork oil. Refresh those tired old forks and make them better than new. These DDCs from Cogent are easy to install. No taking the forks apart, no drilling of the damping rods, nothing. Just take them off, flip them over to drain the oil, add new 5w oil, drop in the DDCs and then add the springs and spacers and then install the caps. Preload spacer material is included with the .47 and .70 springs, additional spacers are not needed with the other kits.
This upgrade offers better control off-road as well as on. Less brake dive keeps the fork up in the middle of the stroke on-road and better control off-road whether it be rolling water bars or bouncing off the rocks.

• Rider and Gear up to 160lb. = 0.47 springs → 24% stiffer than stock
• Rider and Gear 160-225 lb. = 0.52 springs → 39% stiffer than stock
• Rider and Gear 225-275 lb. = 0.58 springs → 56% stiffer than stock
• Rider and Gear 275-325 lb. = 0.63 springs → 66% stiffer than stock
• Rider and Gear 325 lb.-UP = 0.70 springs → 84% stiffer than stock

Patented fork seal features a balanced 3 lip design that evenly distributes the pressure reducing operating temperature, wear and friction

Custom Elastomer Fork Seals have been tested to outlast OEM fork seals. Extends typical seal life by 3 to 5 times over OEM seals

Stiction (friction) measures from 1/3 to 1/2 less than OEM seals for smoother fork action

Lower Stiction, Longer Life! It doesn’t get any better than this!

Plus, the only complete line of dust wipers! Wipers should be replaced with the fork seals to assure peak performance. 

Kit includes Fork Seals and dust wipers.

 

The V2 Slip-On features new aluminum end caps. A USFS Spark Arrestor. DG offers 4 different Quiet Core Inserts to reduce exhaust sound. Lightweight at approximately 5.5 lb.s

The EJK evolved out of the need to address the ever-increasing complexity of factory fuel injection. For the newcomer to the market or professionals wanting an easier method for tuning fuel injection, the EJK is a customizable solution for the rider that wants to take control of their tuning needs.

This unit is a piggy-back EFI controller because it does not replace the stock ECU, but rather monitors the signals to the injectors and makes fuel adjustments based on the mode settings. The GEN 3 has a push button interface allowing access up to 6 different modes to allow for quick fine tuning by the end user without needing a computer.

Key Features:

• No computer or dyno needed!
• Plug and play, simple to install, base settings preset
• Unique load based technology
• Full range tunability available
• Does NOT interfere with stock ECU operation
• Simple push button adjustment interface
• Water-resistant 
• 2-Year warranty
• Compact size - 2.2" H x 3.4" W x 0.5" D

This unique design from Rox allows you to move your bars either closer (1" up and back) or further away (1" forward and 1-1/4" up) depending on rider preference. These risers have an oblong mounting hole so that they will fit virtually any triple clamp with 8mm bolts. A set of reducers lock into the risers ensuring no slippage whether you have a 7/8" or 1-1/8" bars.

Because these are offset there may be limited clearance between the gas tank and the risers when the bars are fully turned on some models, mainly when mounted to move the bars closer.

• The original Hiflofiltro factory was founded in 1955 and has been manufacturing filters for the OEM motor industry since 1963.
• Constructed using the best materials available.
• With the experience of more than five decades, constant research and development and featuring a completely modern production facility, Hiflofiltro offers some of the best quality filters in the world.
• TUV approved and production monitored to ensure OEM or better quality.
• Sold as a package of 5 oil filters.

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

The Foam and Cover Kit is only for the OEM pan. It DOES NOT include the pan.

Will not fit standard L model

These versatile Risers allow you to clamp a 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1- 1/8" aluminum "fatbar". If you are thinking of going to a fatbar after you bend your stock set or just want the versatility and option to run any bar, this is the riser to go with. Reducers lock into risers to insure no slippage between components.

These risers use 8mm bolts. Always check and confirm that your bike has adequate cable and brake line length before installing any handlebar risers.

Anti-Vibration Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations (in these cases we recommend using standard pivoting risers).

Pro-Series foot pegs are made of stainless steel and are hard coated to prevent drooping. These pegs are 50mm x 75mm. Lo-pegs are down and back 1/4".

The universal E-series adapter plate is designed to add a Givi Monokey topcase to most existing flat rear luggage racks. All necessary mounting hardware and installation diagram for attachment to generic tubular-steel flat rear luggage racks is included. This is a universal plate so making it work on your tail rack might need a little self engineering.

Typically installs quickly using simple hand tools. Mounts standard Givi Monokey topcases (ie E45 Elegant, E460 Delux, E52 Maxia), or the flat, stable surface can be used as a solid toprack when the topcase is not needed. Not for use with GIVI Monolock topcases. Made of durable molded nylon with a rugged black finish.

What's in the Box:

• GIVI E251 Adapter Plate
• (4) W-style Adapter Hooks
• Mounting hardware
• Installation instructions

This kit is for the REAR caliper.

• Kits contains all rubber parts necessary to rebuild one caliper.
• Kit includes: boots, seals, bleeder cap, brake pad retaining pins, and copper washers.
• SOLD as EACH

• Six class 10.9 steel sprocket bolts with matching factory-style metal locking Fuji nuts
• Each sprocket bolt has medium-strength threadlock patches for a double lock
• Includes Allen key insert that adapts 8mm T-handle or socket to proper Allen key size for easy installation and removal
• PART #2401-0941 is made to match stock CRF sprocket hardware with 14mm nuts but will work with most Japanese models

Fuel range and water storage is a concern of every adventurer. Easily carry 1l to 1.5l fuel or water bottles with the OBR ADV Gear Bottle Wrap. The OBR ADV Gear Bottle Wrap is a versatile solution to carry varying sizes of fuel/water bottles anywhere on your luggage kit. The OBR ADV Gear Bottle Wrap is a basic wrap panel with a series of web loops that allows secure fuel/water bottle attachment via your existing luggage straps.

Features

• Heavy duty industrial material construction with high strength UV resistant nylon webbing
• External reflective webbing 
• Adjustable side buckles to perfectly adjust to varying bottle diameters
• SRB Buckle strap secures bottles by looping through bottle caps and under bottle base
• Fits bottle diameters ranging from 2.5” to 4”

* Fuel bottle not included

Add a ProCycle Thermal Tumbler for a great value here.

Fuel range and water storage is a concern of every adventurer. Easily carry 2l fuel or water bottles measuring 6”x8.5”x3.5” with the OBR ADV Gear Bottle Holster. The OBR ADV Gear Bottle Holster is a versatile solution to carrying 2l fuel/water bottles anywhere on your luggage kit utilizing existing luggage straps via a series of web loops.

Features

• Heavy duty industrial material construction with high strength UV resistant nylon webbing
• Velcro Back Plate allows for hard mounting using self-sourced appropriate hardware
• SRB buckle strap secures bottles by creating a closed loop over bottle 
• Fits bottles measuring 6”x8.5”x3.5”

* Fuel bottle not included

• Ergonomically designed
• Medium-density Thermoplastic Rubber (TPR) compound provides excellent feedback and control, without sacrificing durability
• Full diamond pattern for an unparalleled feel in both wet and dry conditions
• Inner diameter optimized to keep grips secure in any conditions
• 115mm overall length; fit 7/8" bars and throttle sleeves

From water to fuel, and so much more, the newly designed 2020 Wolf Bottle Holster makes it easy to keep essential fluids close by.

• Mount it to your other motorcycle luggage or keep it close by with multiple attachment points.
• Fit any bottle up to 12” high and 12” in circumference.
• Made from durable waterproof materials.
• An integrated grommet drain hole keeps fluids from pooling up in the holster.

Keep fluids within reach and out of your luggage. The 2020 Wolf Bottle Holster gives you more options. It will now fit any bottle up to 12-inches high and up to 12-inches in circumference. So, 1-liter fuel bottles or insulated 36oz bottles, and almost all bottles in between.

It can also double as a carry pouch with the drawstring top closure. 

• Each kit contains all necessary components to rebuild a master cylinder
• Made by Nissin, an OEM supplier in Japan

Replaces all 2 bolt style clutch/brake lever mount clamps on your clutch or brake lever holder. Can help save space on short bend handlebars.

With the split back, you don't need to remove your grip or throttle tube, just put it on and tighten 'er down. Put the mirror in and hit the road. Clean and simple.

A must for getting your wheels straight, concentric and true. For use with a truing and balancing stand.

Dial Indicator Features:

• Revolution counter.
• Graduation: .001"
• .100" revolution
• Dial reading: 0-100

Magnetic Base Features:

• 130 lbs. of pull.
• With fine adjust.
• Base: 2-5/8" x 2"
• Overall Height: 9"
• Permanent magnetic type ON/OFF switch makes it easy to rest on iron or steel.

Kit Includes:

• Dial indicator.
• Magnetic base with fine adjust.
• Supplied in plastic storage case.

• Top-quality, abrasion-resistant UltraMax™ polyester
• Hi-visibility interior to help locate small parts, such as nuts and washers
• Heavy-duty, self-fastening strap for secure closure
• Small zippered pocket to hold smaller tools, bolts or screws
• Pockets range in various sizes to fit wide range of tools
• Elastic loops to hold CO2 cartridges
• Measures 13.75" x 10.5"

These Cogent Drop-in Dynamic Cartridges will vastly improve both the compression and rebound damping of your stock forks. No disassembly of your forks, no drilling of damper rods. Just change the oil to 5w and install the DDCs under the springs and hit the trails.

Stiffer fork springs are required to realize the full benefits of the DDCs. Please call if you have any further questions.

The DDCs are not recommended for use with progressive springs.

The DDC Install/Removal Tool which makes installation that much easier.

Quality Steel Rear Sprocket

Progressive springs offer a soft initial spring rate for a plush ride. Progressively wound design provides increased resistance to bottoming as spring compresses. These springs are significantly stiffer than the wimpy stock springs.

They will make a big improvement in the front forks while still delivering a smooth ride. Sold in pairs.

Protect your frame/paint from scuffs and scratches with frame guards. The CRF150R frame guards are made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All frame guards are supplied with all necessary mountings and stainless bolts. With a polished finish they look great and are easy to install.

Combo Kits include both Compression as well as Rebound/Mid-Valve Kits with a significant cost savings over purchasing these kits separately. In the "good 'ole days" we got away with just Compression Valving improvements. However, Rebound/Mid-Valves are critical for any modern hi-performance valving setup.

Type 3 Gold Valves are the latest version of our bolt-on fork valving system for cartridge forks. Gold Valves significantly improve the flow over stock pistons, putting valving control on the shim stack instead of the piston. This results in outstanding tuneability, improved control, traction, plushness and bottoming resistance.

Includes detailed online instructions, Gold Valve Pistons, Valving Shims, and access to the Digital Valving Search (DVS) which provides specific valving stacks for your exact weight, skill and riding conditions.

G3-LD Gold Valves provide better control for any rider by creating more shim leverage and decreasing the angular shim deflection.

Top suspension performance requires firm bottoming resistance with plushness at the same time. Even the best suspension tuners can only make the stock valving design work so well. The Gold Valve Shock Suspension System is a proven bolt-on shock valving system that improves control, traction, performance and bottoming resistance.

The Phillips type screws used in Japanese motorcycles are actually Japanese Industrial Standard (JIS) screws and are easy to strip if you are using a regular Phillips screwdriver.

Here is a little kit that will make removing and replacing JIS screws much easier. Includes 2 each of JIS No. 1, No. 2 and No. 3 bits.

These will work in other bit holders and have a mild magnetic tip.

A billet aluminum side-stand from PSR. This is the side-stand you want when you are using lowering-links.

Has many height settings from stock to 2" lower, a must have when lowering your bike. Available in anodized black.

The perfect document holder where you can keep your registration and insurance papers tucked up and out of the way in a water-resistant container. Just zip-tie it to you bike wherever you like and off you go. The Moto Caddy is really two containers in one - the longer side is 4 inches long, good for your paperwork, while the other end has a 1 inch depth, perfect for some emergency coins!

The HelmetLok cable is coated, to protect your helmet and bike. Small and compact enough to fit in your pocket, jacket or on your belt loop. HelmetLok is designed to lock your helmet to any bike using the handlebar or frame as an anchor point. A 'T' Extension is included if you need additional space between the lock and your helmet.

Don't be weighed down carrying your helmet around anymore. Just use the simple to operate, carabiner-style HelmetLok and you can secure your helmet using the convenient outward opening mechanism. The combination can be reset to the number of your choice. Enjoy security and freedom with a HelmetLok.

Everything you need to get you back out on the trail.

• Repair kit includes all the bearings, seals, shafts and spacers required for a complete rebuild
• Constructed from OEM-quality components