Search Products

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.

Rear wheel bearing kit. Includes a new dust seal and the bearing and seal for the cush drive hub. All bearings are sealed on both sides.

Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.

Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.

Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.

Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.

Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.

The rubber coated outside diameter creates an optimum seal at the hub.

Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.

Seal profile is engineered to create equal pressure in each seal lip; equalized seal pressure creates less drag and longer seal life.

Patented MAX-LIFE has a coefficient of friction up to 3 times less than the OEM seal material

Triple-lip seal design

Dyno-tested to last 3 to 4 times longer than OEM seals

Directional ribs allow seal to be installed easily

Kits include fork seals and dust wipers

High quality OEM replacement fork seals.

Sold in pairs.

Both kits include all bushings, snap rings, and washers.

Gen 2 kit also includes the necessary O-rings.

Gen 1 kits are OEM bushings, snap rings and washers.

Bushings are dyno-tested to 500,000 strokes with less wear than OEM bushings

• Kit includes two slider bushings and two leg bushings
• Kit includes all copper washers and O-rings
• Kit includes two fork seal snap rings

Billet aluminum lowering links. Lowers the rear suspension.

Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.

Adjustable lowering links by PSR. Adjusts the rear suspension from stock height to 4 inches lower.

Lowers the rear suspension. Precision machined from billet aluminum and anodized.

*Important when lowering the rear suspension you want to raise the fork tubes in the clamps an equal amount of inches that the rear is being lowered. That way your bike will sit level when done.

Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.

The V-Strom suffers from poor compression damping and limp rebound damping. The Race Tech Gold Valve allows you to tune both compression and rebound valving for vastly improved performance.

• Bolt-on shock valving for riders serious about suspension performance
• Improves control, traction, plushness and bottoming resistance
• Improved, long-wearing, low-friction sealing design decreases fade
• Includes complete instructions

• Race Tech's original bolt-on fork valving system for front cartridge forks
• Triple the flow area of pistons
• Put valving control on the shim stack
• Outstanding tunability; improved control, traction, plushness and bottoming resistance
• G2-R Gold Valves are dual port pistons optimize the loading of shims while improving flow and can be preloaded, freeloaded or restricted
• Complete instructions, Gold Valve pistons, valving charts, valving shims and "Technical Edge Fork Maintenance and Gold Valve Installation" video all included

Damping Rod style forks are notorious for being too harsh, too mushy and too easy to bottom. Gold Valve Cartridge Emulators remedy this problem by controlling the compression damping with a tuneable valve. The Emulator sits on top of the damping rod and is held in place by the main spring.

Simply put; Emulators make damping rod forks perform like well-tuned cartridge forks. Installation and tuning for any condition or rider preference is very straight-forward. 

Simple to install and completely tunable for all conditions and rider preferences.

• Lighter and stiffer than stock, these high quality straight rate springs are made specifically for the DL line.
• A proper rear spring will give a smoother more controlled ride.
• Available in a multitude of spring rates, one is the perfect fit for your bike and riding style.
• Stock spring is rated at 8.2 kg/mm for the DL650, and DL1000

 Adapters are required for this spring

The complete fork upgrade kit - Straight rate springs and Race Tech Gold Valves. Also includes a set of top quality fork seals and fork oil to complete the job. Everything you need to transform your mushy stock forks into suspension that really works.

Progressive springs offer a soft initial spring rate for a plush ride. Progressively wound design provides increased resistance to bottoming as spring compresses. These springs are significantly stiffer than the wimpy stock springs.

They will make a big improvement in the front forks while still delivering a smooth ride. Sold in pairs.

Precision tolerances – The tightest in the industry. Ultra-lightweight, for reduced unsprung mass. Straight rate springs will give better control.

Sold in pairs.

Precision tolerances – The tightest in the industry. Ultra-lightweight, for reduced unsprung mass. Straight rate springs will give better control in the rough stuff. Sold in pairs.

• The .85 springs are 30% stiffer than stock DL650 springs and 21% stiffer than DL1000 springs, a great choice for most riders.
• The 1.0 springs are 50% stiffer than stock DL650 springs and 42% stiffer than DL1000 springs, a better choice for heavier or aggressive riders, heavy loads, 2-up riding, etc.
• Stock spring rates for comparison: DL650-.65 DL1000-.70

Progressive springs offer a soft initial spring rate for a plush ride. Progressively wound design provides increased resistance to bottoming as spring compresses. These springs are significantly stiffer than the wimpy stock springs.

They will make a big improvement in front fork action while still delivering a smooth ride. Sold in pairs.

The complete fork upgrade kit - Race Tech springs and emulators. Also includes a set of top quality fork seals and fork oil to complete the job. Everything you need to transform your mushy stock forks into suspension that really works.

Choose either a 14, 15, 16 or 17 tooth JT countershaft sprockets.

Go down in tooth count for faster acceleration.

Go up for lower RPMs at cruising speeds.

Quality steel rear sprockets. Choose 41T through 47T. The stock size for the 650 is 47T.

The stock size for the 02-05 1000 is 42T and 06-up is 41T. Go up in tooth count for faster acceleration. Go down for lower rpm at cruising speed.

Color may vary based on manufacturer availability, quality will not be compromised.

High Quality chain. Will need to be cut to fit your sprocket combination.

Chain slippers undergo degradation over time due to friction associated with the chain's movement. To maintain optimal operational performance, it is advised to replace worn components with authentic Honda parts.

Chain guides experience degradation over time as a result of chain friction. To ensure optimal performance replace worn components with genuine Honda parts.

Chain sliders undergo performance degradation over time due to the friction experienced by the chain. To maintain optimal functionality, it is recommended to replace worn components with genuine Honda parts.

• Constructed using the best materials available
• TUV approved and production monitored to ensure OEM or better quality
• Sold as a package of 5 oil filters

• Cork-based clutch material impregnated with aluminum particles to increase wear life and heat resistance
• Highly compressed construction avoids swell and clutch drag
• Ideal for general-purpose street/sport/touring bikes
• Kit includes complete engine set of friction plates only
• For use with manufacturer's recommended drive case oil.

This is an extended version of the stock DR650 clutch release arm that is manufactured by Suzuki.

Upgrading to a longer clutch release arm will lighten the pull of the clutch lever through means of increased leverage. This means less fatigue, quicker clutch engagement, easier clutch modulation and longer rides.

The extended clutch arm will not offer a drastic change in clutch pull. If you're looking for a major change in clutch pull at the lever, we recommend getting a Magura hydraulic clutch kit.

GoldPlug is the gold standard in engine protection.

Stainless steel drain plug with an extremely strong magnet that picks up metal flakes in your oil.

14mm Thread

High quality clutch cover gasket. If you are servicing your clutch, a new gasket will prevent oil leaks.

Most fuel injected systems are very lean in their stock configuration. This is good for economy and emissions, but not performance. This unit allows you to adjust the Fuel/Air (F/A) ratio without remapping the ECU and getting into complicated software programs. The PowerJet Fuel Controller allows you to adjust the fuel map from -4% to +10% by selecting one of 10 built-in settings (including stock).

The device works by measuring the outside air temperature very close to where the stock sensor is located and then adjusts the signal from the OEM air temperature sensor to the ECU to make use of the Air Temperature Correction factor that is built into the stock ECU. The ECU is told that the intake air is a little cooler than it actually is and it responds by richening the injection map very slightly. How much depends on your setting on the PowerJet. This will result in improved throttle response, especially if you have an aftermarket exhaust of any kind.

PowerJet is easily installed by plugging it in between the stock AIT sensor and the bike's wiring harness under the seat. This can be done very quickly as they are exactly the same plugs. Unplug the stock connection, plug in the PowerJet on each side. The PowerJet fits easily under the seat behind the battery as it is rugged and waterproof. PowerJet comes with a full one year warranty.

• Manufactured to perfectly fit the factory airbox, these filters use top-quality materials from around the world including the Powerflow filtering media
• Direct replacement of original equipment filter with no need to change carburetor jets or settings
• Designed and developed to meet the demands of high-performance engines

These Twin Air Dual-Stage air filters deliver unbeatable performance and protection which is why they are the hands-down choice of more world and national champions than all other filters combined. Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles without restricting airflow. 

This filter kit includes a new air filter cage.

Each kit contains float bowl gasket (or o-ring), float valve assembly (or float needle) and o-rings to rebuild one OEM carburetor body.

The must-have accessory for adventure-touring. Greatly eases basic chain maintenance, tire changes, parking, and bike cleaning. Super-strong steel construction features typical German design and high engineering standards. Superb integration with the factory exhaust and side stand components - retain all existing features without sacrificing lean angle or clearances.

All hardware needed to mount the centerstand included. Typically installs using basic hand tools. No welding, cutting, or drilling of existing frame or body parts required. Tough black powdercoated finish with some gray fittings or hardware as applicable. A double-retention spring is included as a safety feature to prevent the centerstand from contacting pavement if one of the two springs should fail during a ride. Designed to work with OEM components -- we cannot assure fit with aftermarket exhausts or other accessories.

• Ground clearance & cornering clearance problems
• Difficulty in lifting the lowered bike onto the centerstand

The Strombone is the perfect solution for mounting a GPS unit to your V-Strom DL650 or DL1000. Designed for use with RAM Mounts mounting products (sold separately).

Manufactured from CNC machined 3/8" aluminum, it provides a stable platform and convenient location for your GPS unit, iPod, iPhone, Cell Phone, Camera or other electronic device with a 1" RAM Mount Ball.

This auxiliary light bar is laser-cut from mild steel and powdercoated black for exceptional looks. The holes on each end of the bar are 3/8" and should not be made any larger for strength reasons.

The bar is very easy to install, just remove two plastic "pop" connectors and install the bar with two bolts with clips. All hardware and instructions are included.

Use these brackets to mount your light weight auxillary lights or turn signals. They will bolt directly on to the DR650 lower triple clamp bolts. This makes for a clean 'tucked in' installation. Sold in pairs.

Made from heavy duty 1/8" thick stainless steel, these mounting brackets are specifically designed for mounting 2" LED auxiliary lamps to the front of your TW200. They position the lamps (not included) high & tight to the bike for optimal protection and light projection without interfering with the bike controls, body work, or fuel tank. Kit includes four longer mounting bolts for the lower triple clamp.

The image shows a GoPro camera on the TW's right side and an LED light on the left. You could certainly do something like that as well!

This kit includes the all new Morimoto 4×6 LED headlight and a pre-assembled JNS Engineering adjustable mounting bracket set. Like the rest of the JNS headlight kits, installation is a simple 5 minute plug-and-play procedure.

This is the best performing and highest quality headlight they currently offer. The low beam pattern is bright, very uniform/controlled, and features a proper upper cut-off. The high beam is amazingly bright, eliminating the need for auxiliary lighting (money saved!). Plus the 5,000K color temperature is extremely easy on the eyes. The materials, construction, and aesthetics are all top notch.

It’s a next level headlight, you won’t be disappointed.

Low Beam: 20W, 2,400 Lumens
High Beam: 35W, 4,300 Lumens
Color Temperature: 5,000k
DOT Compliant
Beam Pattern: Left Hand Drive

Does not fit '87 TW200 because that year has a unique AC powered headlight circuit.

So you say you want more light for your dual sport? Give this 7"DOT legal Rally light a try and light it up like a freight train! HIGH/LOW operation and SAE/DOT/E4 approved. 
 

This light does not have the large Cyclops logos shown on one of the images.

• Race Inspired Design
• Hella reflector, made in Germany  stamped SAE/E4
• Lightweight Aluminum Frame
• Plug and Play for Bikes with H4 Bulbs.
• Available with optional mounting plate for computer or GPS
• Easily converted to HID if desired, uses an H4 bulb
• For bikes that are not H4 (XR650R), a simple H4 plug available at any auto parts store will allow you to use this light.
• Now the panel on top of the light for mounting speedos/gps's etc is included, (This is a platform, not actual GPS mount.)

Optional 10.0 Lumen LED High/Low Upgrade  and now the Phoenix LED complete headlight for the ultimate DOT headlight
The stock lamp that comes with this rally light is great, but you can get  well over double the brightness  with the LED upgrade at a substantially lower power draw. Note if your bike is ac powered at the headlight you will need the rectifier for the LED option.. AKA carbureted KTM's CRFX and XR400/650.. others may apply.

This is a plug & play low profile LED light bar kit which includes laser cut stainless steel mounting brackets and high quality wire taps.

IMPORTANT: Must be used in conjunction with LED headlight or bulb that consumes no more than 35W.

  Please note that this product is not compatible with the 1987 TW200.

The SignalMinder unit is designed as a plug-in accessory for many Japanese bikes. SignalMinder uses a microprocessor to cancel the turn signals at one of three selectable time outs; 10, 20 or 30 seconds.

You can also make it so that all four of your signal lights also act as running lights and establish a dual-channel system on your bike. With the dual-channel system, when you activate the RIGHT turn signal three times in succession, you get 4-way hazard flash lights.

Connecting the 12 volt supply from the brakes to the SignalMinder, also allows for a brake flash option.

There are many options and configurations using this electronic tool.

No wire cutting required. The kit includes Scotchlok connectors to tap into existing wires.

Constructed of a 4mm-thick aluminum base plate and 3mm-thick side plates for heavy-duty, light-weight protection. Where the base plates and side plates overlap, it forms a riveted 7mm-thick rail for extra rigidity. Base plate includes side protectors that wrap around the engine block to provide both bottom and side protection. 

Installation of the SW-Motech skidplate requires previous installation of the SW-MOTECH crashbars, which are sold separately.

The SW-Motech skidplate is not compatible with Givi or Hepco-Becker crashbars.

The SW-Motech skidplate can be used without a centerstand, or with the SW-Motech, Suzuki or Hepco-Becker* centerstand.

This bash plate is made from 5mm aluminium 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.

• Fits with  the Genuine Suzuki crash bars
• Designed only to fit with crash bars. Cannot be mounted without the Genuine suzuki crash bars installed

• Made from strong and lightweight aircraft aluminum
• Protects vital engine parts from rocks and debris
• Custom fit to your specific bike model
• Oil drain hole for easy access
• All mounting hardware included

radiator stone guard is machined from 4mm aluminium 5083 plate. The extra thickness of material provides superior strength and protection against larger debri as well as small rocks etc. Radiator guards can be fitted in approx ½ hr or less using basic tools. All radiator guard mounting hardware is supplied where necessary.

This radiator guard is as beautiful as it is effective. Keep your coolant where it belongs with this laser cut 0.100″thick hunk of 5052 aluminum. It is laser cut, CNC formed and then powder coated black.

This protector mounts to the front of the radiator in mere minutes using the stainless steel hardware that is included with the guard.

Protect that vulnerable rear master cylinder with this thick aluminum guard from JNS Engineering. CNC laser cut then formed and given a clean black powder coat finish. Includes new button head screws and aluminum spacers.

A handy shelf laser cut from 16 gauge steel to mount your radar detector, switches or other small accessories for easy viewing access. Does not interfere with the riders view of the instrument panel and in fact does double duty as a shield to keep damaging UV rays off the plastic instrument panel.

This shelf is black powder coated for a clean look and additional durability. Mounts simply to stock or MadStad Bracket and compatible with all wind screens.

TechSpec's line of motorcycle tank grip pads will help you improve the relationship between you and your machine! The ability to squeeze the tank and feel a solid seat position is very comforting. Hard braking maneuvers no longer send you into the tank.

6.6 gallons just not enough? Here is your answer, the 10 gallon tank from IMS. This tank is so large that they installed an internal lift pump to use the full capacity of the tank while maintaining a lower center of gravity than the OEM tank.

Can use factory locking cap or IMS screw on cap. Wing Tank - Does Not Use OEM/Stock Shrouds

State-of-the-art replacement seats, Sargent seats are built on a percision-molded lightweight Polytec seat pan. Sargent's proprietary seat foam (Super Cell Atomic Foam) is their own unique blend of resilience, firmness, and vibration-absorption qualities, making it well suited for long distance comfort and support. Sargent seats are covered in a marine-grade, UV-stablized mildew resistant CarbonFX vinyl. 

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area. 

Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or adventure ride!

Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan.

Quality windscreen made from Lucite aircraft acrylic making it more rigid and optically clearer than OEM windscreens

These models are 2"-4" shorter or 2"-4" taller than stock to meet your particular riding preference.

Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.

What's included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.

• Black aluminum mounting plate (replaces the stock windshield)
• A set of MadStad adjustable brackets
• 3/16" (4.5 mm) thick cast acrylic windshield

The custom shield bolts to the brackets out in front of your instrument cluster. With the shield separated from the front of the bike you can adjust it for the optimum height, angle and airflow. This lets you set the shield for your particular height and riding position while pulling lots of air underneath it which is critical for smooth comfortable wind protection.

Riding is believing. With the windshield separated from the fairing riders now have control over the height and angle of the shield to eliminate the vacuum that is the primary cause of most turbulence. The result? Smooth airflow placed exactly where it’s desired. Most customers have found that they can actually get better wind protection with our smaller adjustable shield rather than a larger fixed one. You don't have to compromise wind protection to enjoy the open-air motorcycling experience!

Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.

What's included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.

• A set of MadStad adjustable brackets
• 3/16" (4.5 mm) thick cast acrylic windshield

The custom shield bolts to the brackets out in front of your instrument cluster. With the shield separated from the front of the bike you can adjust it for the optimum height, angle and airflow. This lets you set the shield for your particular height and riding position while pulling lots of air underneath it which is critical for smooth comfortable wind protection.

Riding is believing. With the windshield separated from the fairing riders now have control over the height and angle of the shield to eliminate the vacuum that is the primary cause of most turbulence. The result? Smooth airflow placed exactly where it’s desired. Most customers have found that they can actually get better wind protection with our smaller adjustable shield rather than a larger fixed one. You don't have to compromise wind protection to enjoy the open-air motorcycling experience!

Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.

What's included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.

• A set of MadStad adjustable brackets
• 3/16" (4.5 mm) thick cast acrylic windshield

The custom shield bolts to the brackets out in front of your instrument cluster. With the shield separated from the front of the bike you can adjust it for the optimum height, angle and airflow. This lets you set the shield for your particular height and riding position while pulling lots of air underneath it which is critical for smooth comfortable wind protection.

Riding is believing. With the windshield separated from the fairing riders now have control over the height and angle of the shield to eliminate the vacuum that is the primary cause of most turbulence. The result? Smooth airflow placed exactly where it’s desired. Most customers have found that they can actually get better wind protection with our smaller adjustable shield rather than a larger fixed one. You don't have to compromise wind protection to enjoy the open-air motorcycling experience!

Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.

What's included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.

• A set of MadStad adjustable brackets
• 3/16" (4.5 mm) thick cast acrylic windshield (frosted bottom to soften headlight reflection)

Their adjustable brackets bolt to the factory windshield mounting plates, then their custom shield attaches to their brackets. With the shield separated from the front of the bike you can adjust it for the optimum height, angle and airflow. This lets you set it for your particular height and riding position while pulling lots of air underneath it which is critical for smooth comfortable wind protection. In addition, our shield is 18" across at its widest point versus 14" for the stock shield, so you will have a wider pocket of wind protection as well.

NOTE: You will NOT be able to use your stock windshield with our adjustable brackets.

New replacement side panels specifically made for TW200.

Sold in pairs, designed to be used with Maier USA Rear Fender.

New replacement side panels specifically made for gen 1 KLR650.

Available in 4 colors.

  Will not fit KLR250

Depending on your application and preferences, more than one optional heat shield may be useful.

OEM Suzuki headlight cowling.

Genuine Suzuki super moto fender. A perfect match for the original gray plastic.

Includes new Suzuki side panels, heat shield, headlight cover, rear fender and your choice of aftermarket off-road or supermoto front fender.

Choice of off-road or supermoto (SM) front fender.

Blue kits come with white side panels.

This luggage rack is made from 5mm aluminium 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.

All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.

Luggage plates will come with pre-drilled holes to suit rotopax mount. On request luggage plates can be pre-drilled to suit Givi top case mounting hardware.

DIMENSIONS

• Total Length: Approx 33cm
• Total Width: Approx 33cm closest to seat, approx 27cm at rear

CNC laser cut from 1/8" aluminum with a large 12.5" (length) x 10" (width) mounting surface area. Quick installation with a 4 point mounting system and no modifications required. There are integrated turn signal mounts, along with multiple strap slots for securing gear bags and cargo. All hardware and instructions are included.

The Rack is compatible with all RotoPax mounts.

You may purchase the rack alone, or you can order the Rack with the RotoPax.

• Lifetime Warranty
• 100% waterproof with electronically heat welded seams
• Made from durable UV Coated 24 oz. PVC Tarpaulin
• Watertight roll closure with quick release buckles
• Padded back panel conceals backpack straps when using as a tail pack
• Securely mounts using 4 NEW RIGG STRAP™ system 
• Purge valve makes for easy compression  
• Front MOLLE panel includes a clear waterproof document pocket
• Integrated external pocket to hold optional hydration bladder (CL-HYDRO-S not included)
• 1 side bottle pocket large enough to hold 30 oz. fuel bottles (Bottles not included)
• Backpack straps are adjustable and padded for comfort
• Dimensions: 12.5”L x 7”W x 21.5”H
• Holds approx. 30 liters

Antigravity Batteries introduce the ground-breaking "RE-START (RS)" line of batteries. These are the first batteries with built-in jump starting! They intelligently monitor their status, and just before going completely dead, puts itself to sleep with just enough energy to get your vehicle started again. Simply press the RE-START button located on the battery, then start your bike and ride away!

These are an extremely lightweight (2.3 lbs.) and high-powered Lithium-Ion replacement battery for motorcycles. These batteries offer the first Battery Management System (BMS) found on a powersport battery and includes low-voltage cut-off, over discharge, over-charge, and thermal protections with real time lithium-ion cell balancing. Highly recommend using a lithium charger to maintain the life of the battery.

3 Year warranty

Product Size is just 5.9"L x 3.5"W x 3.74"H. If you need spacers, select the optional Foam Kit to pad the battery in the battery box.

Built with the latest in Lithium Ion Polymer Technology. All components are designed, manufactured, assembled and packed in one location assuring high quality and consistency. Besides extreme lightweight (50% to 70% lighter than standard lead-acid batteries) it also features a built-in LED test gauge and the ability to mount it in any position.

The Firepower features increased cranking amps over lead acid batteries and has a very fast recharge cycle, and can be brought up to a 90% charge within 6 minutes. It also has 6 to 12 times more cycle life when compared to lead acid batteries. A 2-year warranty insures that your investment is protected.

220 CCA 12V/48WH
Package Dimensions: 6.20 x 3.70 x 5.25

Galfer Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.

The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.

• Significantly improves response and feel over factory rubber lines
• Largest performance improvement for your money over any other braking upgrade
• Stainless steel hose resists abrasion and puncture
• Teflon core does not degrade over time like rubber lines
• PTFE Dupont 64 Teflon® hose
• Feature a heavy-duty stiffener sleeve and route just like the factory lines
• Proprietary, premium fittings
• Banjos utilizes a unique machined channel and sealing surface for leak-free installations
• R&D and engineered in the USA
• GBrakes USA controls the manufacturing process, ensuring the highest level of quality control

Galfer Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.

The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.

• Significantly improves response and feel over factory rubber lines
• Largest performance improvement for your money over any other braking upgrade
• Stainless steel hose resists abrasion and puncture
• Teflon core does not degrade over time like rubber lines
• PTFE Dupont 64 Teflon® hose
• Feature a heavy-duty stiffener sleeve and route just like the factory lines
• Proprietary, premium fittings
• Banjos utilizes a unique machined channel and sealing surface for leak-free installations
• R&D and engineered in the USA
• GBrakes USA controls the manufacturing process, ensuring the highest level of quality control

• Organic brake pads contain man-made high-performance fibers that are used for their light weight, high strength abrasion resistance and thermal stability. These Aramid fibers have a high strength-to-weight, thermal stability and abrasion resistance to provide advantages over steel fiber-based products. They provide excellent stopping power without noise and rotor galling but still provide fingertip control and strong, predictable brake response.
• Double-H sintered metal brake pads feature the HH friction rating, the highest in the industry. These pads provide maximum brake effect and last twice as long as organic pads.
• Semi-sintered pads have an all new recipe containing 30% copper by weight with an organic matrix. This design combines the long life of a sintered pad with the great feel and lack of rotor damage common with full-sintered pads. These can be used to replace Kevlar or sintered metal compound pads.

EBC brake pads contain aramid fibers; these are man-made high-performance fibers used widely for their light weight, high strength, abrasion resistance and thermal stability.

Sintered Pads from EBC are the best pads we have found for the KLR, they provide good performance in all conditions yet still give you long pad life.

These sets include front and rear brake pads.

• Aramid fibers have high strength-to-weight, thermal stability and abrasion resistance to provide advantages over cheaper steel fiber-based products
• Provide excellent stopping power without noise and rotor galling, even on polished rotors
• Fingertip control and strong, predictable brake response

DOUBLE-H SINTERED METAL PADS
Provide maximum brake effect and last twice as long as organic pads
Feature the HH friction rating – the highest in the industry

Each kit includes all necessary rubber components and brake pins.

This is the ultimate adventure bike platform, it measures 2.25" wide, 4.75" long.

Patented adjustable collars make it easy to run them in the 'standard' or 'low boy' positions on most bikes.

Gain more room for bulky boots, or for longer legs. Fastway Adventure pegs come with two sets of F3 cleats, one standard, one long. Kamber bolts lets you adjust the 'tilt' of your pegs to increase comfort, or to give better squeeze on your bike.

The new Fastway Evolution AIR foot pegs are now the ultimate pegs in the Universe.

Designed and sculpted out of the best 7075 Billet aluminum by Pro Moto Billet elite engineers and machinists. Featuring Fastway's Patented adjustable height, traction, and camber options, the Evolution AIR footpegs are superior in every way.

Fastway Evolution AIR pegs are designed to shed mud and debris, while being ultra strong.

Pivot Pegz have set a new standard in footpeg performance and quality and now they are even better. The new Mark 4 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 4 also incorporates new heavy duty, long life springs and they come with a lifetime warranty.

Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever.

• Wide 60mm platform
• Widest and lightest pivoting pegs on the market
• Open design = less mud packing
• Unique multi-directional grip pattern
• Outstanding build quality
• Race proven design and durability

These top of the line Adventure pegs from Warp 9 are 5" long and 2.5" wide. They will give your feet the perfect perch whether you are cruising down the highway or standing up hammering down a singletrack trail.

• Ceracote coated Chromoly steel pivot for the ultimate in strength
• Replaceable 7075 T6 Aluminum Platform
• Permanent Stainless Teeth provide the ultimate in non-slip traction
• Built-in bottle opener in the bottom!

Not your average rubber insert! These rubber covers go over the top of your MK3 or MK4 Pivot Pegz so that the aggressive teeth are only exposed when you need them in muddy conditions.

• Unique, innovative design
• Wide flat platform
• Openings allow mud/dirt to pass through
• Easy and quick to get on/off
• Good grip
• Reduced vibration
• Extra comfort

Important to verify which style Pivot Pegz you have before ordering.

Low peg mounts from JNS Engineering. You can use your stock pegs or aftermarket pegs with these T7 mounts.

These offer a 24mm drop & 24mm rearward offset.

Note: Not compatible with any center stand.

Our complete foot peg assemblies. 1-3/4" lower than stock. No extra brackets that hang down below the frame. Easier on the knees. Wider platform Yamaha YZ style footpegs are stronger and give you firmer footing. Mount solid to the frame. No more 'droopy' feeling when standing on the stock pegs. Lowering your footpegs makes it easier to stand and less of a reach down to the bars when standing.

Now you can get our Low Pegs with MK4 Pivot Pegz or black Fastway ADV pegs (both Yamaha YZ pegs) installed!

DG Performance exhausts help your engine breathe better, resulting in increased throttle response, power and torque.

The V2 Series Slip-On muffler features:

• Lightweight aluminum body
• Stainless steel inlet tube
• TIG welded components
• Great new look

Standard sound level is approximately 98 db and quiet core inserts are available separately.

This Lightweight Slip-On weighs approximately 5.5 lbs and bolts directly to the stock headpipe.

It is equipped with a US Forest Service-approved spark arrestor.

Replaces all 2 bolt style clutch/brake lever mount clamps. Can help save space on short bend handlebars.

Order up your new levers here! If you keep breaking levers, you might want to think about a set of hand guards to protect them in case of a fall.

Quality genuine Honda replacement levers. Standard length.

CNC Machined high quality aluminum folding levers.

Lever folds outward to prevent breakage in the event of a crash.

Automatic lever position restoration provides quick recovery from the crash.

Ultra precision machine cut for super light weight construction, high precision and quality.

Available in 4 finger lever length to fit your riding style.

Made of durable aluminum for extreme strength. Titanium color anodized finish.

Sold Individually

CNC Machined high quality aluminum folding levers.

Lever folds outward to prevent breakage in the event of a crash.

Automatic lever position restoration provides quick recovery from the crash.

Ultra precision machine cut for super light weight construction, high precision and quality.

Available in 3 and 4 finger lever lengths to fit your riding style.

Made of durable aluminum for extreme strength. Titanium color anodized finish.

Sold Individually

Quality replacement levers. Standard length.

Order up your new levers here! If you keep breaking levers, you might want to think about a set of handguards to protect them in case of a fall.

Quality replacement clutch cable.

• Nylon-lined housings and precise OEM component dimensions

This Super Siphon has  a (1/2 inch x 6 foot) long hose, which makes it quite easy to transfer fuel from one bike to another! Simply, shake the hose to prime it and get fuel moving. The hose is resistant to gasoline and any other hazardous chemicals. Roll it up, stuff it in your bag and you will be very happy whenever you need it.

Maintain your chain or sprocket, even change your rear tire or wheel while out on the road without the need for a center stand, with the BikeMaster Liftstick. Handy and convenient to carry. Perfect for street, dual sport and trail use. Liftstick includes non-slip rubber boots, which protect your motorcycle's swingarm from any scratches while claws at the base provide traction and stability during use.

• Made of heavy-duty steel with a powder-coated finish.
• Available in black or red.
• Extends from 12.5" - 18"

Having the proper fork oil level is imperative to the handling of your bike. Setting the correct fork oil level is a snap with this fully adjustable gauge. The adjustable aluminum level plate can be set from 0 to 295mm. The oil reservoir has single milliliter markings up to 60ml.

Being able to accurately tune your forks by adjusting the oil level can make them better resist brake dive or bottoming. Oil level should be thought of as a fine tuning method to make your choice of spring rate work perfectly for your bike.

Cat Crap is the #1 voted anti-fog on the market. Lens cleaner and anti-fog in one. Works for all lenses, eyewear, goggles, helmet visors, etc.

From Michelin. An innovative tread pattern with blocks and curved grooves, based on the Dakar-winning Desert Race tire, provides real off-road performance especially in soft terrain and challenging conditions. Specially designed compound gives a long tread life for extended adventure rides. Front and rear tire casing design ensures excellent on-road stability.

An -R after the size indicates that these are Radial tires.

These tires are R-rated (max speed of 106 mph)

• Tread pattern yields traction in hard terrain
• Built-in rugged tread blocks feature Staggered Step design, a step-down feature to provide rigidity in the contact patch to enhance stability and handling
• Wrap-around lugs on the tire's edge to protect the tire from sharp rocks and provides additional off-road traction
• New compounds to deliver the perfect balance between road and off-road performance with focus on delivering class leading mileage performance
• Deep grooves excel in wet weather conditions
• T-rated for speeds up to 118 mph
• Tires are tubeless, however if mounting on rims that require a tube (i.e., spokes) the appropriate tube may be fitted
• Blackwall
• Fits popular large and small displacement machines.

These Rider's Wrenches by Fredette are combination wrenches that have three wrenches in one! A 2-stroke size spark plug wrench - a front axle and a rear axle wrench. Yep, all three in one unit.

Available in the combinations shown that will fit virtually all current dual-sport machines.

• Allows precise valve lash adjustment without disturbing the setting when the lock nut is fastened
• Knurled knob on adjuster drivers ensure a precise and secure grip
• Integrated repositionable wrench handle holds the lock nut while the drivers are used to loosen or tighten the valve adjustment screw
• Includes 10mm socket with straight slot adjuster
• Fit motorcycles and ATVs with straight slot screw-type adjusters and 10mm lock nuts