Universal fit. May require additional adjustment or modification.
Don't cut the ball ends off of your levers! These billet spacers move your hand guards outward to allow clearance for the full length of the stock levers. Designed to fit steel or aluminum bars. Includes longer stainless steel mounting bolts.
Developed for the DR650 but may work on other models with long levers. (May require additional adjustment or modification on some models.)
Low peg mounts for the DR From Wirtz Wire. These are different than our other mounts for several reasons. First, these are designed around the stock pegs. All of the pegs in this section will fit these mounts. Another difference is that these mounts are offered in a low mount as well as a low and rearward mount. These are 'wire EDM' machined from solid 1018 steel bar stock, and are not welded anywhere. They are powder coated black for a great look. Both mounts move the pegs down 2" while the low and rear mounts also move the pegs back 1.3".
Kit comes with new mounts, longer bolts and a longer brake switch spring that will be needed. Pegs are optional, your stock pegs will work.
The upper image shows the low and rearward mounts while the one below that is of the just low mounts. If you look at the two images below that, you will see that these are the low and rearward pegs for both sides of the bike.
Universal fit. May require additional adjustment or modification.
For Tapered 1 1/8" handlebar.
Contoured alloy hand guards with inner mounts, allow space for the clutch cable and brake hose.
Note: This kit includes the aluminum handguards only. Plastic deflectors sold separate, can be added by selecting color from drop down menu.
For DR650 or other models with long levers add the optional universal fit Spacer Kit so you don't have to cut the balls off the end of your levers when installing these handguards. (May require additional adjustment or modification on some models.)
Universal fit. May require additional adjustment or modification.
For Tapered 1 1/8" Handlebar
Protect your hands and levers with the Barkbusters Storm lever and weather protection handguards. Full wrap solid heat treated aluminum bars with secure two point mounts on each side provide strength while attractive and generous guards provide shelter from the wind and weather. Ride longer with the Storm handguards and complete mounting kit by Barkbusters.
Features:
Two mounting points provide secure protection
Full wrap guards
Heat treated aluminum backbone bars
Easy installation
Tough and weather shielding Storm handguards
Aluminum backbones are compatible with all Barkbusters deflector guards
What's in the box:
Left and right aluminum backbone bars
Inner and outer handlebar mounting hardware for both sides
Left and right Storm plastic handguard deflectors
Installation instructions
Not recommended for Africa Twin, T7, Himalayan, or V-Strom. Please see specific listings for those models.
NOTE: tapered kit will not fit Renthal Twin Wall or Barkbusters VSBar
Universal fit. May require additional adjustment or modification.
For Straight 7/8" handlebar
Contoured alloy hand guards with inner mounts, allow space for the clutch cable and brake hose.
Note: This kit includes the handguards only. Deflectors sold separate, can be added by selecting color from drop down menu.
For DR650 or other models with long levers add the optional universal fit Spacer Kit so you don't have to cut the balls off the end of your levers when installing these handguards. (May require additional adjustment or modification on some models.)
Universal fit. May require additional adjustment or modification.
Droppin’ into the weather? Combine Bushwackers Hand Guards with rigid hand guards/deflectors and heated grips for the ultimate protection against the elements. Ride safer and longer with warm, dry and clean hands and controls. Essential gear for motorcycles, snow bikes and snowmobiles.
Cold/wet weather comfort
Brush, mud and trail protection
Strap on/off in seconds
Multiple mounting configurations to fit most motorcycle makes/models equipped with rigid hand guards and/or deflectors
Tough stretch polyurethane strap (can be used separately)
Custom wind foil shapes
No stitching or pieces to fail
When not using Bushwackers Hand Guards, straps have a thousand other uses: Lash water bottles, fuel, gear to tail rack. Hold flashlight in place while working in dark. And many others!
Made in USA
REQUIRED EQUIPMENT: Motorcycle must be equipped with rigid hand guards or deflectors to support Bushwackers while riding.
Materials: Corona (UV) Treated, Matte Finish, .055 Gauge Polyethylene Plastic Dimensions (flat): 13.5″ (length from end closest to bar clamp to end closest to bar end) x 16″ (widest part at end of bars) x 6″ (narrowest part nearest center of bar)
Today's newest motorcycles are more likely to have flat-panel instrument displays than conventional mechanical gauges. And, like your cell phone, it's worth the effort to protect the often fragile and scratch-prone screen face with the new R&G Second Skin Dashboard Protection kit. Made from high quality, anti-scratch material, the R&G screen protector kit has been designed to preserve the clarity of your motorcycle's dashboard screen.
Universal fit. May require additional adjustment or modification.
Maximize your wind protection with the Barkbusters largest handguard plastic! For use with single sided Storm mount and all Barkbusters backbone handguards
Africa Twin (CRF1000L) '16 - '19Africa Twin (CRF1000L) Adventure Sport ES '18 - '19
Protect your motorcycle's levers from damage during an impact with the solid protection offered by Barkbusters aluminum bar lever protection handguards. Constructed with solid, heat treated aluminum backbones, these hand protectors use a two point mounting system that provides strength to withstand plenty of force. Motorcycle handguards by Barkbusters with their full wrap design, will help keep your levers operational and your ride from coming to a premature end in the event of a drop or other mishap.
Features:
Two mounting points provide secure protection
Full wrap guards
Heat treated aluminum backbone bars
Easy installation
Compatible with all Barkbusters deflector guards (not included)
Provide protection for your motorcycle’s front brake and clutch levers with Barkbusters aluminum bar lever protection handguards. Designed specifically for the Royal Enfield Himalayan, these guards feature heat treated full wrap aluminum backbones that mount at two points on each side for strength. Prevent costly damage to your motorcycle with Barkbusters aluminum bar lever protection handguards.
Features:
Two mounting points provide secure protection
Full wrap guards
Heat treated aluminum backbone bars
Easy installation
Compatible with all Barkbusters deflector guards (not included)
NOTE: Not compatible with Royal Enfield braced handlebar.
Universal fit. May require additional adjustment or modification.
It may not surprise you that they are covered with HippoSkin™, their waterproof outer shell, and insulated with a generous layer of HippoFat™, a warm, flexible, closed cell foam insulation—both are designed to keep inclement weather away from your hands.
Sold in pairs.
Hand/brush guards are required for proper fitment and for safety reasons.
Hippo Hands go on and off in seconds and never require tools or hardware.
The Backcountry is 9" deep.
If you like to stand and ride, this is the model for you! But… these hand covers also fit to just about any bike. They are also a great option for cruisers with hand guards or lever guards.
They feature a durable, quilted interior and flexible, neoprene cuff which ensures a great fit on so many bikes. The Backcountry is their smallest, most easily adaptable hand cover.
The Backcountry features a front reflective panel for higher visibility in low light situations.
Universal fit. May require additional adjustment or modification.
The OBR ADV Gear Enduro ¾ Grip Mitt is your answer to cold fingers! Our ¾ open design terminates right at the wrist, but still offers full coverage of the hand while blocking the swirling air flow that freezes finger tips. Their ¾ open design does not cover important controls such as Hi/Lo Beam, Turn Indicator, or Kill Switches making this Grip Mitt perfect for both Off Road, Enduro, ADV, and ATV applications with full wrap hand guards.
Features
High strength and water resistant 1680d Ballistic Nylon construction
Universal easy on/off Velcro snap strap attachment system
Reflective Front Strip for High Visibility
¾ Open design provides full coverage of the hand while not impeding controls
Works with OEM and Full Shield (Cycra/Trackside) style hand guards (Hand guard system required for attachment)
Universal fit. May require additional adjustment or modification.
Extend your comfortable riding season with Barkbusters BBZ cold weather protection handguards. Designed to fit with or without existing Barkbusters backbones or handlebar weights, these guards offer superb wind protection without limiting access to your grips or controls. Simple to install, they can be mounted or removed within ten minutes without permanent modifications. Ride with less bulky gloves in colder weather with the Barkbusters BBZ cold weather protection handguards.
Protect your motorcycle’s levers from damage during an impact with the solid protection offered by Barkbusters aluminum bar lever protection handguards. Constructed with solid heat treated aluminum backbones these hand protectors use a two point mounting system that provides strength to withstand plenty of force. Motorcycle handguards by Barkbusters with their full wrap design will help keep your levers operational and your ride from coming to a premature end in the event of a drop or other mishap.
Features:
Includes bar end weights
Two mounting points provide secure protection
Full wrap guards
Heat treated aluminum backbone bars
Easy installation
Compatible with all Barkbusters deflector guards (not included)
Add Plastic Handguards for a complete kit.
Please Note: This aluminum bar handguard kit requires the removal of original external and internal bar weights on '19-Current models. This will leave a hollow handlebar for mounting the handguard.
Provide protection for your motorcycle’s front brake and clutch levers with Barkbusters aluminum bar lever protection handguards. Model Specific, these guards feature heat treated full wrap aluminum backbones that mount at two points on each side for strength. Prevent costly damage to your motorcycle with Barkbusters aluminum bar lever protection handguards.
Features:
Two mounting points provide secure protection
Full wrap guards
Heat treated aluminum backbone bars
Easy installation
Compatible with all Barkbusters deflector guards (not included)
Provide protection for your motorcycle’s front brake and clutch levers with Barkbusters aluminum bar lever protection handguards. Model Specific, these guards feature heat treated full wrap aluminum backbones that mount at two points on each side for strength. Prevent costly damage to your motorcycle with Barkbusters aluminum bar lever protection handguards.
Features:
Two mounting points provide secure protection
Full wrap guards
Heat treated aluminum backbone bars
Easy installation
Compatible with all Barkbusters deflector guards (not included)
Mount Barkbusters standard aluminum bar handguards to 1-1/8" motorcycle handlebars with the Barkbusters 1-1/8 inch (28.5mm) handlebar saddle clamp set.
Provide protection for your motorcycle’s front brake and clutch levers with Barkbusters aluminum bar lever protection handguards. Model Specific, these guards feature heat treated full wrap aluminum backbones that mount at two points on each side for strength. Prevent costly damage to your motorcycle with Barkbusters aluminum bar lever protection handguards.
Features:
Two mounting points provide secure protection
Full wrap guards
Heat treated aluminum backbone bars
Easy installation
Compatible with all Barkbusters deflector guards (not included)
Universal fit. May require additional adjustment or modification.
This kit includes 2 auxiliary light mount brackets. These brackets are designed to mount to most lower triple clamps. New longer bolts are supplied to accommodate the thickness of the bracket. These brackets are powder coated black for a sleek and long lasting finish. The brackets can be used to put the addition of new lights to the outside of your forks or swap the brackets and the lights can be mounted inward to give more clearance for bigger shrouds or fuel tanks.
The Modoc 250 replacement rear shock significantly upgrades your Yamaha XT250 suspension. Cogent Dynamics custom build this high quality and high performance shock custom to suit your riding needs.
Damping rates optimized to your specific needs, giving you the best ride comfort, traction and control.
Frequency and velocity sensing valving works great over wide ranging conditions.
Rebound damping adjustability.
Low internal friction.
All CNC machined components for top quality and performance.
Compact and rigid design with internal separator piston.
Fully serviceable shock is designed for the long haul.
Cogent Dynamics build a fully custom suspension component, just for you. To best meet your needs, please spend a few moments providing us with your riding style (off-road / adventure, or street / commuting) and your approximate weight with gear and luggage in the comments during checkout. The information you provide helps them setup your suspension to most closely meet your needs.
Specifications for the Modoc 250:
Fits: Yamaha XT250 from the new models introduction in 2013 to present.
Rebound: Over 30 clicks of adjustability
Spring Preload: Single threaded collar for ease of adjustability
Dynojet Jet Kits increase power and smoothness throughout the entire rev range, while maintaining optimum fuel economy. Each Dynojet Jet Kit includes comprehensive instructions which show step-by-step installation and testing procedures to ensure a perfect setup every time.
Stage 1: stock engine/filters, stock/modified pipes; about a 5% power increase
Stage 2: stock/mild modified engine, stock/modified pipes, stock/modified filters; about an 8% power increase
This is an extended version of the stock DR650 clutch release arm that is manufactured by Suzuki.
Upgrading to a longer clutch release arm will lighten the pull of the clutch lever through means of increased leverage. This means less fatigue, quicker clutch engagement, easier clutch modulation and longer rides.
The extended clutch arm will not offer a drastic change in clutch pull. If you're looking for a major change in clutch pull at the lever, we recommend getting a Magura hydraulic clutch kit.
Dynojet Jet Kits increase power and smoothness throughout the entire rev range, while maintaining optimum fuel economy. Each Dynojet Jet Kit includes comprehensive instructions which show step-by-step installation and testing procedures to ensure a perfect setup every time.
Stage 1: stock engine/filters, stock/modified pipes; about a 5% power increase
Dynojet Jet Kits increase power and smoothness throughout the entire rev range, while maintaining optimum fuel economy. Each Dynojet Jet Kit includes comprehensive instructions which show step-by-step installation and testing procedures to ensure a perfect setup every time.
Stage 2: stock/mild modified engine, stock/modified pipes, stock/modified filters; about an 8% power increase
Taillight & brake light. Attaches to the top side of enduro style (XR, KDX, etc) rear fenders. Dimensions: 2 3/8" x 4 3/4" x 1 3/4" tall. This light is a popular replacement for the gigantic stock XR650L taillight. Functions as taillight and brake light. Fits perfectly into the taillight pocket on the XR650L. Please note that this no longer has a window for a license plate light.
Have you already ditched the bulky tail light on your XR? Don't want to bend your license plate and wrap it around your rear fender? Here is a great solution to clean up the looks of the backside of your XR650L. If you haven't already upgraded to the smaller and better looking WPS Tail light, select 'Bracket & Light' from the menu and you will get the WPS Taillight AND the License Plate Holder.
Please note that this no longer has a window for a license plate light. To stay legal, you can mount one or two License Plate Lights to your plate holder, or you can check out the LED License Plate Frame.
Universal fit. May require additional adjustment or modification.
Motion Pro T-6 Combo Lever has a hex box wrench for your axle nut on one side and a perfectly contoured tire spoon on the other. Manaufactured from lightweight forged T-6 aluminum with a hard anodized finish. These beauties are just under 10 inches long and weigh only 3.5 oz. Available in a 12/13 combo unit and a 22, 24, 27 and 32mm hex ends.
Damper rod forks are notorious for being both too harsh yet too easy to bottom. This is the nature of damper rod fixed orifice forks.
Cartridge Emulators make damping rod style forks perform like well-tuned cartridge forks. These tunable valves sit on top of the damping rods and are held in place by the main springs. This makes them both simple to install and completely tunable for all conditions and rider preferences.
Here is everything you need to upgrade your TW200 front suspension. Kit includes: Heavy Duty Fork Springs, Cartridge Emulators, Oil Seals, Dust Seals, and 10w Fork Oil. Just choose the spring rate you want and enjoy your TW even more!
Stock Spring Rate is .50 kg/mm. The .60 kg/mm springs are 20% stiffer than stock while the .70 kg/mm is 40% stiffer than stock.
Installation requires disassembling your forks and drilling out your damper rods.
A quality foam Air Filter to replace the stock one. Uses the same guide and frame as the stock unit. It requires foam filter oil to properly trap dirt particles. Don't forget the Evolution Air Filter Oil kit from No Toil.
The Warp 9 shift lever is black anodized and the Warp 9 logo is laser etched into the finish. Theblackanodized knurled aluminum tip is folding and returns via a stainless-steel return spring. Includes the pinch bolt as well.
New wider seat to help keep comfortable on that long commute or dual sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike.
The new updated 2.0 version has a sleeker shape and a better fit in the tank area.
Complete Seats come assembled on an aftermarket pan and ready to ride.
Width:
8" (203mm)
Height:
Same as OEM
Custom-made to Order: Please allow 3-4 weeks for delivery.
Universal fit. May require additional adjustment or modification.
Extremely light handling with exceptional grip in corners, combined with high mileage compound. This radial tire offers great control and feedback when riding on the limit. Quick warm-up and good grip when cold thanks to a specially developed tread compound.
0° Steel belt construction on the front and rear for higher stability and great feed-back when braking into and accelerating out of curves.
Universal fit. May require additional adjustment or modification.
Steel wheel weights replace the old lead ones that are no longer legal in some states. Mount up new tires and make sure they are balanced for a smoother ride and longer tire life.
This is a 60 piece pack, 1/4 oz. weights with adhesive backing.
Universal fit. May require additional adjustment or modification.
Dust/waterproof synthetic/petroleum blend for foam-type air filter elements. Super-tacky polymer and co-polymer additives hold onto virtually all fine particles.
Since Kawasaki brought back the popular little KLX250 with updated fuel injection, Yoshimura brought back an updated RS-2 slip-on that now incorporates an o2 sensor that accommodates the new fuel injection technology on the KLX. All of that with added power, torque and that distinct Yoshimura exhaust note.
Entire unit is proudly made in the good old US of A to boot!
Diamond-shaped sleeve
Large core and increased muffler packing volume means quieter operation
Stainless steel cone end-cap
Stainless steel tail-pipe
2.8 lbs. lighter over stock unit.
Comes with USFS Approved Spark Arrestor
The product that you are purchasing is designed and intended for closed course competition use only and is labeled as such, i.e. Yoshimura "RACE SERIES." Yoshimura RACE SERIES products are neither designed nor intended for use on PUBLIC ROADS or LAND. Such use is prohibited by Federal and State regulations.
Supermoto forged tubeless wheels. These wheels are machined from forged alloy blanks. A 3.5 x 17" front wheel matched to a 4.25 x 17" rear. Hub can be changed out to fit future bikes. Includes brake rotors, sprocket, cush hub and color matched 90 degree valve stems.
For additional color options please call / email for availability.
Comes complete with:
Warp 9 front supermoto machined wheel
Front oversized floating 320mm rotor and bracket
Warp 9 rear supermoto machined wheel
Cush rear hub
Apex rear rotor
Sprocket
Includes a color matching (to the hub) 90 degree valve stems Rear hub is Cush drive All rotors and sprockets bolt patterns are OEM spec. Tubeless design offers further weight savings and complexity over spoke wheels Front wheel without rotor is 10lbs 2 oz Rear wheel Cush drive no rotor or sprocket is 15lbs Rear wheel direct drive no rotor or sprocket is 14lbs
Add tires to your wheel order and we will mount and balance them at no additional charge.
Custom made: Please allow 2-3 weeks for delivery. Cannot be canceled.
The 12oclock Labs EXUP Emulator is used in place of the stock exhaust servo motor when you replace the stock exhaust with an aftermarket exhaust system. The microprocessor controlled EXUP, emulates the exact characteristics of the stock exhaust servo motor and its motor delay sweeps, keeping the ECU from displaying the dreaded check engine light. Weight is less than 1/2 an ounce and it is a direct plug and play replacement.
The B & B Eng. DRZ400 Bash Plate is made from 4mm thick 5083 aluminium plate. Strong and great looking, this is the top of the line protection plate for the DRZ. Supplied with all the necessary stainless steel clamps and bolts required. Available in polished or with the heavy-duty black polymer coating. Like all he other B&B Bash Plates, these plates have foam or rubber where required to keep things a bit more quiet. This plate fits the E, S, SM & kick start models.
Quality steel sprockets and EK SROZ2 525 O-Ring chain. Available in gear ratio choices from - 13/42 to 15/46. EK SROZ2 525 chains come in 120 link length and may have to be cut down to fit. They also come with rivet type master links. Clip type links are available below.
13 and 14 Tooth sprockets require a smaller retainer
Universal fit. May require additional adjustment or modification.
Radial architecture that enables improved overall response and handling as well as unrivaled performance when compared with a same-size cross-ply tire. A 100% silica rubber compound delivers the best wet grip in its category. Derived directly from the radial Sport Touring ranges and a tread borrowed from the Pilot Road 2. Good for tubeless or tube type applications
Universal fit. May require additional adjustment or modification.
The TCK70 combine rugged off-road ability with balanced street performance. Unique tread block pattern makes this tire quiet and stable on the road yet still agile on gravel. Combined with a MultiGrip semi-dual compound technology allows different levels of tire 'hardness' on the central tread and tire shoulder for extended mileage and improved cornering grip.
Tires listed are all standard Bias Ply tires unless noted with an -R after the size.
RainGrip technology provides outstanding wet-weather grip and short tire warm-up times
High stability and low kickback from 0° steel belted construction
T Rated (max speeds of 118 mph)
All of the TKC70's are Tubeless Tires. However, tubes can be used in Tubeless tires.
The RS-2 is a potent and versatile design that evolved from their original TRC, engineered to provide increased power delivery. With a different pyramidal shape that features increased volume, the RS-2 is a quieter system with a larger core — and it offers the added bonus of outstanding performance in a value-priced package.
Diamond-shaped sleeve
Large core and increased muffler packing volume means quieter operation
Stainless steel cone end-cap
Stainless steel tail-pipe
USFS Approved spark arrester included
6.8 lbs lighter than stock
We recommend Anti-Seize on exhaust fasteners
Backordered: Waiting for stock from suppliers to fulfill orders placed on or after September 2024
Steel braided lines have a Teflon tube as a core wrapped with a stainless steel wire braided exterior which doesn't allow the brake lines to stretch under pressure like stock rubber lines do.
The benefit is a firmer brake lever with better feel because the energy that was going into stretching the stock lines now goes straight to the brakes.
Built with the latest in Lithium Ion Polymer Technology. All components are designed, manufactured, assembled and packed in one location assuring high quality and consistency. Besides extreme lightweight (50% to 70% lighter than standard lead-acid batteries) it also features a built-in LED test gauge and the ability to mount it in any position.
The Firepower features increased cranking amps over lead acid batteries and has a very fast recharge cycle, and can be brought up to a 90% charge within 6 minutes. It also has 6 to 12 times more cycle life when compared to lead acid batteries. A 2-year warranty insures that your investment is protected.
165 CCA 12V/36WH Package Dimensions: 6.20 x 3.70 x 4.45
The PowerBomb header promotes better flow by allowing a small expansion of the exhaust gasses. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels.
Optional Heat Shield Strip will protect your airbox from the close proximity of the hot head pipe.
JT Sprockets are made from the latest generation of computer design and control metal cutting equipment for maximum durability. Front sprockets are made from chromoly SCM420 steel alloy. All sprockets are heat-treated and hand-finished to meet or exceed the highest possible quality standards.
Stock size rear brake rotor laser-cut from high-carbon content 410 stainless steel, then lap cross hatched and heat-treated. Each one then has a high-temp paint applied to surfaces like cooling holes and edges for a clean finished look.
Universal fit. May require additional adjustment or modification.
Renthal chain lube is 100% lubricant, zero propellant. So this new 250ml bottle size combines high performance and value.
The all-new formula Chain Lube is specially designed to penetrate all parts of the chain. This all-condition lube is compatible with all o-ring and non o-ring chains.
Formerly DSA, now ProCycle brand, is a plastics kit in three colors - Black, White, and Blue, as well as Blue fenders with White side panels and Black fenders with White side panels. (headlight cowl not included).
Vacuum molded, these parts are a design improvement over the stock pieces. The side panels have a crisper, more angular look than the stock parts while the front fender is shaped like the DRZ400SM OEM front fender. Big enough to be functional without wind-steering the bike like the stock fender does.
Kits include front and rear fenders, a new LED tail/brake light and license plate holder, and both side panels.
Add a fresh new side panel hardware kit and an adhesive heat shield for a fresh off the showroom floor look.
Add a stock Suzuki headlight cowl if you are doing a complete color change to your DR (must select plastic kit with head light cowl option)
This kit is for those of you looking for a bit more arm room and a better platform for your feet in the TW cockpit. Included are ProCycle Wide Foot Pegs and our oversize bars with 30mm risers.
ProCycle Wide Pegs are wider MX style pegs that are much more comfortable when standing.
These are not only taller bars, but 1-1/8" at the clamp area for additional strength. They taper down to 7/8" on the ends so all the stock controls fit. Black in color.
30mm Moose risers that raise the handlebar 30mm.
Kit does not include new throttle tube. If you have 2001 or newer TW200 and would like a new billet aluminum throttle tube, please select the addon box to receive one with your order.
The EVO R series draws on our rich heritage of making power. Offered for various off road MX and sport ATV models, the EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.
JT steel rear sprockets are manufactured using only the finest grade of C49 high carbon steel.
Two styles of rear sprocket were used on the DR350. The 90-95 'S' and 'SE' (street legal) models have a cush drive hub. The 96-99 'S' and 'SE' as well as all of the 'dirt only' models have a non-cush rear hub. Select your sprocket accordingly. If you are not sure, look at your bike. If the sprocket is bolted directly to the wheel hub you have a non-cush model. If your sprocket is bolted to a separate sprocket carrier you have a cush drive model.
B&B Off Road's KLR650 Luggage Rack is made from 5mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.
Race Tech HP Springs have a high stiffness-to-mass ratio. In other words; the springs are light weight for their particular spring rate. This requires the finest materials and processing. Shot-peened and pre-set so they cannot sack out. All Race Tech HP Springs have the highest rate tolerances in the industry. These are the finest springs in the world-guaranteed.
OEM spring rate is 6.7kg/mm. We offer stiffer spring rates for riders who wish to carry luggage or just prefer stiffer suspension.
Race Tech shock springs require adapter collars which are included with your spring. *Spring color may vary due to specification requirement and availability.
The stock sprocket retainer will rub the chain when it is used with 13 and 14 tooth sprockets.
We have our own sprocket retainer laser cut from 13 gauge stainless steel. This retainer works with all 3-hole 13T, 14T, 15T and 16T DR650 countershaft sprockets.
The genuine factory shop service and repair manual. This is the reference manual Suzuki dealers use in their service departments. It has all the necessary info to do any maintenance or repairs to your DR650.
The DG RST (Reduced Sound Technology) muffler is the quietest DG muffler and is designed especially for dual-sport machines (Just 84db @ 3200 RPM). A new baffle design dissipates sound waves reducing noise output in a very efficient manner. This new design also stretches out the time between muffler repacks. Included is a Stainless Steel mid-pipe, USFS Approved Spark Arrestor and a new Aluminum end cap.
Replacement front fender by Maier that will fit great on your TW200.
All Maier bodywork is made of tough, vacuum-formed high-gloss polypropylene
Drilling is required
Colors are OE color matched
Note: The proper way to install this front is to install the stock fender bracket to the under side of new Maier front fender using stock screws and nuts.
Acerbis 5.3 gal tank adds function and great looks to your DR650. This high capacity fuel tank incorporates modern lines and high quality construction that can't be beat. Includes gas cap, petcock and all mounting hardware.
Installation of the Acerbis tank requires relocation of the front turn signals. Otherwise the stock signals will contact the tank at full lock. Our Turn Signal Relocation Brackets Move the front turn signals up and forward to clear the bigger tank.
Universal fit. May require additional adjustment or modification.
Construction of these handguards feature heavy duty aluminum guards with colored plastic deflector shields. They offer great protection from those trees that jump out at you on the trail and the cold wind and rain you encounter on the street. They feature a deep bend on the outer bar end for maximum freedom of hand placement and high quality bar mounts on the inside.
Select your desired color.
Must add the corresponding size mounts to fit your handlebar.
For DR650 or other models with long levers add the optional universal fit Spacer Kit so you don't have to cut the balls off the end of your levers when installing these handguards. (May require additional adjustment or modification on some models.)
Please Note: These handguards do not fit the Yamaha T7
Universal fit. May require additional adjustment or modification.
The glove box for your motorcycle! The Zigzag handlebar bag is their smallest bag yet also one of their most popular. Sometimes you only need the basics like your wallet, phone, registration, and other small items, and no matter what you’re riding, the Zigzag handlebar bag delivers quick and easy access to the basics.
VOLUME: 1.5 liters (92 cubic inches)
DIMENSIONS: 10.5” L x 2.5” W x 4” H (27 cm L x 6 cm W x 10 cm H).
MATERIALS: Rugged Bomb Shell™ vinyl coated fabric, and Mil-spec materials and hardware.