Search Products

• The ultimate power booster featuring exclusive Ti-Metal construction
• Improved bottom to mid-range power
• Produce the low end of a longer header and the top end of a short header
• Less susceptible to damage than a long header
• Runs well with sound-restricting mufflers; effectively reduce sound output by as much as 1.5 dB
• Substantial power increases everywhere
• Constructed of extremely lightweight materials

The PowerBomb header promotes better flow by allowing a small expansion of the exhaust gasses. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels.

If your aftermarket exhaust is missing heat shield mounting points, this is the easy fix you’ve been waiting for. 

Includes one stainless steel mounting bracket with M6 threaded nut, and one stainless steel hose clamp.

Fits exhaust approximately 1.1inch-2inch diameter. Trimming may be required for smaller diameter exhausts.

Replacement Carbon Fiber Heat Shield for the Honda Monkey made by Akrapovic for their Muffler

The race-bred RS-2 exhaust has proven to be extremely popular among rider looks for a combination of performance and value. It enhances performance dramatically, provides an enviable exhaust note and offers the unmistakable look and sound of Yoshimura. RS-2 mufflers feature a straight baffle that leads to a single turn-down machined aluminum end cap.

All models have a USFS Approved spark arrester in a oval-shaped sleeve with a large volume of packing material.

• Yoshimura's full system max HP is up 7.3% as well as max torque being up 3.1%
• With a custom end cap featuring a titanium tip, a special inner core baffle, and an integrated heat shield, this little guy delivers style, performance, tone and fun!
• Includes an 18mm O2 sensor
• Yoshimura RS-3 Stainless Full System weight: 5.5 Lbs. vs Stock Full system weight: 11.2 Lbs.

The RS-4 Slip-On exhaust has a unique design that provides an unrivaled combination of power and a quiet exhaust note.

• Pentagonal-shaped sleeve
• Front muffler cap functions as a polyresonant chamber which helps reduce noise
• Laser-cut heat shield on polyresonant chamber
• Two-stage stepped baffle
• Turn-out carbon fiber end-cap
• Stainless steel tail-pipe

The EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.

• Hard anodized oval shaped aluminum muffler
• TIG welded reinforced muffler bracket(s)
• 304 stainless steel mid pipe
• Red powder coated stainless steel end tip
• Lighter than stock exhaust system
• Huge horsepower and torque gains
• Sleek muffler design allows for maximum clearance
• Removable screen-type spark arrestor included
• Handmade in the USA
• 1 Year Limited Manufacturer’s Warranty

The Chilly Exhaust Heat Shield is the most effective heat shield on the market. The innovative three piece design consists of a top shield attached to 2 rails with rivets and spacers. This reduces the contact area and slows down heat transfer. They have incorporated a patented, insulated reflective blanket on the underside of the shield to reduce radiant heat transfer. The included stainless steel clamp makes it simple to install.

We highly recommend a heat shield if you run soft luggage without hard racks.

FEATURES:

• Solid Top Shield - The logo is laser etched and there are no cutouts on the top shield. This prevents radiant heat from passing straight through to your luggage.
• Side Rails - By isolating these with spacers the heat conductive surface area to the top shield is reduced and slows down heat transfer.
• Radiant Heat Shielding - The reflective insulated blanket on the bottom of the shield is the real hero. This patented material won't be found anywhere else in the motorcycle industry. 
• Stainless Steel Clamp - Slots have been provided in the side rails to make installing as easy as it gets.
• Brushed Aluminum - Lightweight and looks nice.

DIMENSIONS:

• Length 7.5" (190mm) x Width 3.5" (76mm) x Height 1" (25mm)
• Clamp fits any exhaust 3.5" - 5.5" (89mm - 149mm)

Have you lost your stock heat shield, or need one on an aftermarket head pipe? FMF makes this nice unit that includes clamps, heat shield with the FMF logo and button head screws to hold it on. We recommend Anti-Seize on all exhaust fasteners.

By popular demand. This is our own mid-pipe adapter kit for the GSXR exhaust cans. The unique design works with both 3-bolt Hayabusa and 4-bolt GSXR mufflers. It features all stainless steel TIG welded construction with a laser cut adapter. A spring tensioned slip joint allows for heat expansion. A stainless steel hanger strap allows it to attach to your original muffler mounting point. No welding is required. Mid-pipe length is approximately 17" long.

This mid-pipe does not require a stock muffler joint gasket when used with the stock headpipe, the SS Pro-Flow, or the FMF headpipe, eliminating the hump in flow.

Don't forget a fresh seal ring gasket that fits between your muffler and mid-pipe adapter.

Our very own high flowing head-pipe is made in the USA using a CNC (computer numerically controlled) mandrel bender for an absolute perfect fit. It is a high quality 3-piece welded two into one, stainless steel head-pipe.

• Primary tubes: 1-1/4" diameter
• Collector tube: 1-3/4" diameter
• Secondary tube: 1-5/8" diameter

The SS Pro-Flow is a tested upgrade over stock that will bolt right on with no modifications needed. 

We recommend a new exhaust gasket when installing your new SS Pro-Flow.

Protect your head pipe from rock damage. This stainless steel spine clamps to your head pipe to add a layer of protective armor between your vulnerable pipe and those nasty rocks or logs. Fits the stock headpipe. Will fit the FMF head pipe with the addition of larger clamps.

Did you snap a headpipe bolt on your XRL or are your headpipe bolts looking a bit dingy and rusty?

These replacement header exhaust stud bolts are made of super corrosion resistant 316 stainless steel.  They provide excellent resistance to chemicals and saltwater to give your exhaust system a hassle free service life.  

If you've got an older XR650L, you know the struggle of removing the O.E. nuts from the studs.  They either snap, remove the stud or come off as they should.  At some point you're likely to snap on or come across a seized nut to stud.  These bolts are a superior upgrade to the O.E. nut and stud.

Kit includes: 4 Stainless Steel bolts

This kit will replace both of your stock corroded or rusty headpipe bolts. These are OEM replacements.

Constructed from 304 stainless steel and breathes much better than the stock unit. Handmade in the USA with a 1 Year Limited Manufacturers Warranty.

The PowerBomb header promotes better flow by allowing a small expansion of the exhaust gasses. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels.

• Select applications available in SX version that is designed for more low to mid-range power and an MX version that is focused in the mid-to-upper rpm range
• Act as "pre-muffler" helping to lower the decibel output
• Available in stainless steel for strength combined with light weight, or in titanium for even greater weight savings
• Utilize FMF's patented module precisely located at the initial stage of the header for specific applications
• Horsepower is increased as much as 10%
• The expansion and contraction of exhaust sonics through the system causes increased flow
• Position "Bomb" increases performance

Set your bike apart with a custom exhaust look. Withstands direct heat up to 2000°F.

• 2 inches wide and 25 feet long
• Available in black or natural
• 4 stainless steel tie wraps

• Offers an upgrade to a full system when used with the Akrapovic slip-on exhaust system
• Let your bike stand out with more power, a beautiful design, and the unique Akrapovic sound

The PowerBomb header promotes better flow by allowing a small expansion of the exhaust gasses. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels. Includes clamp-on mounts for the stock heat shield. We recommend Anti-Seize on exhaust fasteners.

Our very own high flowing head-pipe is made in the USA using a CNC (computer numerically controlled) mandrel bender for an absolute perfect fit. It is a high quality 2-piece 18 gauge stainless steel head-pipe with 1 3/4" outer diameter, compared to the stock outer diameter of 1 1/2".

The SS Pro-Flow is a tested upgrade over stock that will bolt right on with no modifications needed. It is compatible with any combination muffler/mid-pipe, as well as all motor configurations of the DR650 '96-current.

Includes a stainless steel band clamp for the mid-pipe joint, clamp-on heat shield mounts, to use with stock heat heat shield and a stainless steel flange at the exhaust port mount. We recommend a new exhaust gasket when installing your new SS Pro-Flow.

Delayed stock from manufacture, please ask for availability.

• Powercore silencers give your ride a deep works-like tone while providing optimum, dyno-tuned performance
• Silencer body is constructed of 6061-T6 grade aluminum with machined mounts and a clear anodized finish to bring out the shine

• The most popular 2-stroke silencers in FMF's arsenal
• The elliptically shaped bodies with perforated core perform well in any condition
• Equipped with a Performance Flow end cap and nickel-plated front stinger

The V2 Series Slip-On muffler features an aluminum body, TIG welded components, stainless steel inlet tube and a great new look. This Lightweight Slip-On weighs approximately 5.5 lbs.

The DG Performance systems offer increased throttle response, power and torque. Standard sound level is approximately 98 db. Equipped with a US Forestry approved spark arrestor.

• Features lightweight stainless steel and aluminum construction
• Designed to increase horsepower and torque
• Bolts directly to the stock headpipe
• Uses a U.S.F.S. certified spark arrestor.
• DG offers 4 different Quiet Core Inserts to reduce exhaust sound.
• Lightweight at approximately 5.5 lb.

The V2 Slip-On features new aluminum end caps. A USFS Spark Arrestor. DG offers 4 different Quiet Core Inserts to reduce exhaust sound. Lightweight at approximately 5.5 lb.s

Small install marks from the hardware mounting points. No other marks or scuffs, only installed, never ran. Not in original packaging, all hardware included.

• Features lightweight stainless steel and aluminum construction
• Designed to increase horsepower and torque
• Bolts directly to the stock headpipe
• Uses a U.S.F.S. certified spark arrestor.
• DG offers 4 different Quiet Core Inserts to reduce exhaust sound.
• Lightweight at approximately 5.5 lb.

The V2 Series Slip-On muffler features an aluminum body, TIG welded components, stainless steel inlet tube and a great new look. This Lightweight Slip-On weighs approximately 5.5 lbs.

The DG Performance systems offer increased throttle response, power and torque. Standard sound level is approximately 98 db. Equipped with a US Forestry approved spark arrestor.

The EVO R series draws on our rich heritage of making power. Offered for various off road MX and sport ATV models, the EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.

• Hard anodized oval shaped aluminum muffler
• TIG welded reinforced muffler bracket(s)
• 304 stainless steel mid pipe
• Red powder coated stainless steel end tip
• Lighter than stock exhaust system
• Huge horsepower and torque gains
• Sleek muffler design allows for maximum clearance
• Removable screen-type spark arrestor included
• Handmade in the USA
• 1 Year Limited Manufacturer’s Warranty

Desire that aggressive look of a Grandprix Growler Exhaust System? Needing a little more mean to your lean bike? If so, you’ve come to the right place! HotBodies Racing has a great solution and a price that’s kind to your wallet. Our NEW MGP Growler inspired exhausts will scare the competition with its deep growl of power and performance while showing off HotBodies’ famous aerodynamic styling. This compact MGP Growler exhaust bolts on your ride with zero modifications, giving you the look of a polished Grandprix model.

The new DG RST (Reduced Sound Technology) muffler is the quietest DG muffler and is designed especially for dual-sport machines (Just 89db @ 3200 RPM). A new baffle design dissipates sound waves reducing noise output in a very efficient manner. This new design also stretches out the time between muffler repacks. Included is a Stainless Steel mid-pipe, USFS Approved Spark Arrestor and a new Aluminum end cap.

You may want to consider a new exhaust gasket that goes between the header and the muffler.

The new DG RST (Reduced Sound Technology) muffler is the quietest DG muffler and is designed especially for dual-sport machines (Just 84db @ 3200 RPM). A new baffle design dissipates sound waves reducing noise output in a very efficient manner. This new design also stretches out the time between muffler repacks. Included is a Stainless Steel mid-pipe, USFS Approved Spark Arrestor and a new Aluminum end cap.

Replacement muffler hanger strap for your SS1 muffler.

This beautifully shaped exhaust perfectly matches the Monkey’s unique character. The twin conical mufflers are constructed from stainless steel and feature titanium sleeves. Offers power gains throughout the entire rpm range along with a reduced weight. The sporty but classic appearance can be further enhanced by adding the specially designed carbon fiber heat shield.

DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.

Hard anodized oval shaped aluminum muffler with a TIG welded reinforced muffler bracket and red powder coated stainless steel end tip. Sleek muffler design gives you lots of clearance and it has a removable screen-type USFS approved spark arrestor. Unit is pounds lighter than stock and gives gains in horsepower and torque throughout the RPM range. All of that in a package handmade in the USA with a 1 Year Limited Manufacturers Warranty.

The EVO R series draws on our rich heritage of making power. Offered for various off road MX and sport ATV models, the EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.

• Hard anodized oval shaped aluminum muffler
• TIG welded reinforced muffler bracket(s)
• 304 stainless steel mid pipe
• Red powder coated stainless steel end tip
• Lighter than stock exhaust system
• Huge horsepower and torque gains
• Sleek muffler design allows for maximum clearance
• Removable screen-type spark arrestor included
• Handmade in the USA
• 1 Year Limited Manufacturer’s Warranty

• Computer-designed and dyno-tested for every 4-stroke application
• Hi-Flo end cap boosts all-around performance
• Optional Quiet Core insert will provide a decrease in sound level if desired
• Enhanced sonic evacuation delivers a higher flow of exhaust gases, which increases power
• Feature a screen-type spark arrestor that does not interrupt exhaust flow or performance
• FMF's exclusive cross-weave internal packing provides longevity and maximum sound dispersion
• Round perforated steel inner cores make for optimum flow, using hi-flo technology
• Elliptical aluminum can offers strategic sizing for superior performance
• A stainless steel mid-pipe mates to the computer-designed rear can for lightweight durability

• Constructed of stainless steel with a lightweight allow can
• Space age internal packing for maximum packing life
• Hi-Flo modular end cap
• Internal shape of core uses Hi-Flo technology
• Enhanced sonic evacuation provides for higher flow and increased power
• Includes removable spark arrestor

When designing the PowerCore 4 HEX, they looked at their top of the line products to deliver race-inspired performance at an economical price. The end result is a quality muffler with improved torque, increased horsepower and rugged durability all at a price that won't break the bank.

Features:

• Overall increase in power and torque.
• Durable stainless steel and aluminum construction.
• Space Age internal packing material for maximum longevity.
• Internal shape of core uses Hi-Flo technology.
• Enhanced sonic evacuation provides for higher flow and increased power.
• Includes removable spark arrestor.
• Can be used with FMF or Stock OEM Header

Stainless steel can and carbon fiber end cap.

• Trapezoid-shape muffler
• Maximized internal volume
• Straight, single core baffle
• Low-volume sound insert capable

Yoshimura has paired their legendary RS-2 exhaust pipe with the Kawasaki KLR 650. The KLR 650 has literally been ridden around the world, and now with our fire-breathing RS-2 slip-on exhaust system, you can do it faster - and in style!

Assembly comes complete with:

• Stainless muffler sleeve
• Stainless steel mid-pipe
• All installation hardware
• Detailed instructions
• Trick, turn-down tip inserted in the endcap
• Dual stainless steel mounting brackets
• High-quality chrome steel exhaust springs with spring vibration dampers with the Yoshimura logo molded in
• Plastic end cap to plug the pipe during washing
• Super-trick spring pulling tool

• Weight: 6.66 lb (-4.45 lb vs the OEM)
• AISI 304 stainless steel sleeve
• High temperature resistant packing (1,650 °F)
• Adjustable full carbon fastening strap
• Laser etched LeoVince logo
• Carbon fiber heat shield included in the package

• The latest EVOLUTION of the popular LV ONE: Aggressive Sound and Style
• Clean laser-etched Leo Vince logo in an innovative carved design (for the carbon-fiber exhaust: bright aluminum die-cut high-temp resistant Leo Vince adhesive logo)
• Asymmetric design and high-temp resistant full carbon-fiber end cap
• Impact-resistant sandblasted oval AISI 304 stainless steel sleeve – titanium look
• TIG-welded stainless steel front cup
• Adjustable full-carbon fastening strap
• Removable dB Killer, weight savings and flawless installation

Two options are available: stainless steel and carbon fiber. The stainless steel features ASIS 204 stainless steel with a special sandblasted finish giving it a titanium-like look. The carbon fiber option is the lighter than stainless steel and features a flat finish that exposes the intricate carbon fiber weave.

• CAD/CAM design for precise fit
• Techno-polymer end-cap
• Weight savings over stock exhaust
• Increased horsepower across the entire RPM range
• TIG-welded AISI 304 stainless steel link pipe
• Tuned to work with stock fuel settings

No repacking required! The Leo Vince X3 Enduro is made with TIG welded stainless steel internals and aluminum outer shell. It features a semi-direct chamber design that is maintenance free. It's quiet too! Our own in-house testing showed a 84dB sound level using the USFS J1287 testing procedure. 84dB is louder than stock but significantly quieter than any other aftermarket muffler. It includes a certified Spark-Arrestor.

This muffler works on OEM header only!

No repacking required. The LeoVince X3 Enduro is made with TIG welded stainless steel internals and aluminum outer shell. It features a semi-direct chamber design that is maintenance free. It's quiet too! Our own in-house testing showed a 84dB sound level using the USFS J1287 testing procedure. That is a bit louder than stock but significantly quieter than other aftermarket mufflers. It includes a certified Spark-Arrester. This muffler requires a stock muffler joint gasket when used with either the stock headpipe or the FMF headpipe.

No repacking required. The LeoVince X3 Enduro is made with TIG welded stainless steel internals and aluminum outer shell. It features a semi-direct chamber design that is maintenance free. It's quiet too! Our own in-house testing showed a 84dB sound level using the USFS J1287 testing procedure. That is a bit louder than stock but significantly quieter than other aftermarket mufflers. It includes a certified Spark-Arrester. This muffler requires a stock muffler joint gasket when used with either the stock headpipe or the FMF headpipe.

Body is made from lightweight 6061 T-6 brushed aluminum and the end cap and intake tube are stainless steel. Silencers include wire-meshed spark arrester that can be removed for closed-course racing. Optional end caps allow fine-tuning of power delivery for different types of riding and terrain.

Straight-through design of the spark arrestor canister and the Performance Flow stainless steel end cap ensure strength, durability and unrestricted power.

Desire that aggressive look of a Grandprix Growler Exhaust System? Needing a little more mean to your lean bike? If so, you’ve come to the right place! HotBodies Racing has a great solution and a price that’s kind to your wallet. Our NEW MGP Growler inspired exhausts will scare the competition with its deep growl of power and performance while showing off HotBodies’ famous aerodynamic styling. This compact MGP Growler exhaust bolts on your ride with zero modifications, giving you the look of a polished Grandprix model. Complimented by Hotbodies’ sleek Undertail this MGP exhaust will give your bike a ‘direct from the race track’ look.

The Powercore 4 spark arrestor muffler. FMF developed the Powercore 4 to increase the horsepower and torque throughout the entire power curve. Highest quality packing for long life. Removable spark arrestor included. Louder than the Q4. Approximately 99db stock or about 94db with optional Quiet Insert installed.

• Uses long-life muffler packing for increased packing life
• Forest Service approved spark arrester

Delayed stock from manufacturer, please ask for availability.

• Overall increase in power and torque.
• Durable stainless steel and aluminum construction.
• Space Age internal packing material for maximum longevity.
• Internal shape of core uses Hi-Flo technology.
• Enhanced sonic evacuation provides for higher flow and increased power.
• Includes removable spark arrestor.
• Can be used with FMF or Stock OEM Header

The Q4 employs intricate chambers, baffles and proprietary multistage packing material making it the best performing quiet muffler available.

Constructed from aircraft grade aluminum and high strength stainless steel.

Sound output 96dB. Several pounds lighter than the stock muffler.

Yoshimura RS-3 that will slip right on to your stock header. Made by hand to the highest quality standards using the championship-winning racetrack experience and their extensive R&D facility ensure these pipes perform and will last.

Both full systems and slip-on mufflers include 96 dB sound insert/USFS approved spark arrestor installed in the muffler. Mid-pipe is stainless steel while the stainless RS-3 oval muffler design has a slim profile with an aluminum end cap.

Works on OEM header only!

• Oval muffler body with single turn-down polished aluminum end cap
• Maximized internal muffler volume for exhaust flow
• Straight, single-core baffle
• Can accept low-volume sound insert
• Large volume of packing material
• Straight baffle for ample flow
• Bolt-on design for easy installation

The Yoshimura RS-4 is a proven choice to improve the performance and sound of the Africa Twin.

Removing the stock muffler saves over 4 pounds and makes the 988cc parallel twin engine growl!

• Oval-ellipse shaped sleeve
• Yoshimura's Works Finish for increased durability & adventure friendly design
• Features an integrated inlet heat shield design for a seamless transition with the stock heat shield

• Dual-muffler design exhaust system
• Achieves maximum performance, mass centralization, and rider usability
• Systems feature three-stage tapered headpipe for the best power gains, better throttle response and power delivery
• Vertical divider splits the exhaust gases more evenly for smoother flow to the mufflers for better mid-top power and throttle response
• Parallelogram-shaped muffler bodies increase muffler volume over the stock system for even crisper throttle response and reduced noise levels
• Systems meet AMA noise sound regulations right out of the box (AMA 2-Meter Max and Amateur 94 dB sound compliant)
• Muffler inserts are tunable to adjust power delivery and noise level

The RS-2 is a potent and versatile design that evolved from our original TRC, engineered to provide increased power and power delivery. With a different pyramidal shape that features increased volume, the RS-2 is a quieter system with a larger core - and it offers the added bonus of outstanding performance in a value-priced package.

• Diamond-shaped Stainless steel sleeve for increased durability.
• Large core and increased muffler packing volume means quieter operation
• Stainless steel cone end-cap
• Stainless steel tail-pipe
• Weight: .39 lbs lighter than stock configuration
• USFS Approved spark arrester included

• RS-3 Sound Insert for the Honda Monkey
• This new insert is designed to take the dB level down and fit perfectly with the RS-3 for the Monkey

• The Q series features advanced engineering to precisely locate baffles and chambers to absorb sound
• Less mass to enhance power-to-weight ratio
• Quiet power with minimal sacrifice for performance
• Developed over years of championship off-road racing
• Twin-stage core design for lower sound output and extended life of packing material
• Comes standard with spark arrestor

• The Q4 employs intricate chambers, baffles and proprietary multistage packing material making it the best performing quiet muffler available
• Constructed from aircraft grade aluminum and high strength stainless steel
• Sound rating 96dB
• Much lighter than the stock muffler

The Powercore 4 spark arrestor muffler. FMF developed the Powercore 4 to increase the horsepower and torque throughout the entire power curve. Highest quality packing for long life. Removable spark arrestor included. Louder than the Q4. Approximately 99db stock or about 94db with optional Quiet Insert installed.

• Uses long-life muffler packing for increased packing life
• Forest Service approved spark arrester

Delayed stock from manufacturer, please ask for availability.

The Powercore 4 spark arrestor muffler. FMF developed the Powercore 4 to increase the horsepower and torque throughout the entire power curve. Highest quality packing for long life. Removable spark arrestor included. Louder than the Q4. Approximately 99db stock or about 94db with optional Quiet Insert installed.

• Uses long-life muffler packing for increased packing life
• Forest Service approved spark arrester

Ultra-Light, Race Inspired Titanium Muffler

Available in slip-on/bolt-on and full system configurations depending on the application

• Titanium body
• Spring retained inlet
• 2.25" Spiral perforated core
• Billet CNC machined aluminum outlet
• Carbon fiber end cap
• Tunable for tone with P1 and P1-X insert options
• Stainless steel headers/mid-pipes where applicable
• Made in the USA

The Hi-Output Slip-on gives the bantamweight Monkey a heavyweight punch with a deep throaty growl and a beautiful stainless brushed finish.

• 3/4 System; Mid-pipes and muffler
• CNC Machined Billet end cap
• Laser engraved logo badge
• Laser-cut chassis cover
• 3 lbs lighter than stock

DISCLAIMER: NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES.

This Quiet Insert comes stock in all new FMF Q4 mufflers. If you lost yours, this is the replacement you need.

It will fit Q4, Q4 Hex, Powercore and Powercore Hex mufflers.

It will reduce the sound rating of the Power Core models, from about 99db down to about 96db.

Please choose the correct Insert for your muffler. If you are unsure of the year that your muffler was manufactured you can easily identify visually which insert you will need.

The ProCycle SS1 muffler was designed so this existing spark arrester will fit right in. This is also the same unit that is often adapted to the GSXR 40F0 muffler. It fits FMF exhaust as well.

The basic purpose of a center stand serves to enhance ownership experience by easily raising the rear wheel completely off the ground for drive chain lubrication and adjusting, tire & tube patching/replacement and even FRONT wheel work. Those fortunate enough to have owned a motorcycle equipped with a center stand have come to learn the game-changing role it can play -even off-road.

Center stands have many more inherent uses including:

• Increased stability when parked on soft ground
• Easier cleaning and pre/post ride inspections due to the upright positioning
• Less effort required to place on its stand when compared to a milk crate or portable stand
• Superior parking/storage advantages in tight spaces

Unlike a basic portable moto stand, your center stand is ALWAYS available wherever your need it, whenever you need it.

When in use, this kit raises your rear tire 3/4" off the ground. When retracted, the stand tucks away, 100% unobtrusive to the rider and passenger. A robust retention spring ensures the stand remains retracted, even on the roughest trails.

Each kit comes with all hardware and detailed instructions. All parts are powder coated black with a fine texture

The must-have accessory for adventure-touring. Greatly eases basic chain maintenance, tire changes, parking, and bike cleaning. Super-strong steel construction features typical German design and high engineering standards. Superb integration with the factory exhaust and side stand components - retain all existing features without sacrificing lean angle or clearances.

All hardware needed to mount the centerstand included. Typically installs using basic hand tools. No welding, cutting, or drilling of existing frame or body parts required. Tough black powdercoated finish with some gray fittings or hardware as applicable. A double-retention spring is included as a safety feature to prevent the centerstand from contacting pavement if one of the two springs should fail during a ride. Designed to work with OEM components -- we cannot assure fit with aftermarket exhausts or other accessories.

• Ground clearance & cornering clearance problems
• Difficulty in lifting the lowered bike onto the centerstand

The SW-MOTECH center stand for your Yamaha Tenere 700 increases the versatility of your machine for more secure parking on various terrain while enhancing ease of maintenance. Robust steel construction provides sturdy support for the motorcycle and is powder coated black for enhanced durability and corrosion resistance. This high quality center stand is designed and engineered in Germany for seamless integration with the factory original components and easy operation utilizing a built in foot lever which increases leverage and decreases lifting effort.

Features:

• Robust steel construction
• Attractive powder coated black finish adds corrosion resistance & durability
• Improves parking stability and versatility on various surfaces
• Significantly reduces the risk of a tip over when used on softer terrain vs side stand
• Integrates perfectly with the factory original components
• Easy to use German design uses leverage to make lifting a cinch
• Foot lever increases leverage to aid in lifting technique
• Does not require cutting, drilling or any other permanent modifications
• Allows on the road maintenance without a paddock stand
• Eases chain and tire maintenance
• Double retention spring ensures safe operation even if one spring fails

Greatly eases basic chain maintenance, tire changes, parking, cleaning, etc. All necessary hardware is included. Installs using basic hand tools. Tough black powder coated finish.

For riders who wish to run the centerstand and the lowered footpegs we recommend installing a Warp 9 brake pedal. The Warp 9 pedal is arched to give the necessary clearance under the pedal.

The SW-Motech Centerstand is something that should be an OEM item. Essential for flat tire repairs, tire changes, chain maintenance, oil changes, loading/unloading luggage and many other day-to-day maintenance operations.

Integration with OEM exhaust and sidestand is exceptional. The extended foot lever maximizes leverage making for easy elevation of your Twin. There are no penalties in clearance for these benefits. Tubular steel construction with a heavy-duty black powder coat provides for a stable foundation for supporting your motorcycle. No sacrifices were made to the performance or clearance of the Twin.

Installation is a simple bolt-on procedure; no drilling, cutting, welding or relocating other components for fitment. Package includes all necessary mounting hardware and detailed instructions.

Please Note that the Centerstand works perfectly with the Skid Plate Extension.

Not your average rubber insert! These rubber covers go over the top of your MK3 or MK4 Pivot Pegz so that the aggressive teeth are only exposed when you need them in muddy conditions.

• Unique, innovative design
• Wide flat platform
• Openings allow mud/dirt to pass through
• Easy and quick to get on/off
• Good grip
• Reduced vibration
• Extra comfort

Important to verify which style Pivot Pegz you have before ordering.

Like most machines, the OEM pegs on the Africa Twin are for the birds. They are small and provide a minimalist platform to control the motorcycle and they are uncomfortable if you stand on them for very long. You can install new, larger pegs or you can bolt on these beautiful aluminum extenders on top of the stock units. You can see the stock peg inside the topper in the upper image.

If you stand for very long these pegs will pay for themselves quickly. CNC machined with slightly rounded edges on the teeth so they won't eat up the soles of your boots, then anodized black, these are pretty and functional. 2.32" x 3.38" is nearly double the contact area of the stock pegs. Mounting hardware and detailed instructions are included, making installation a snap.

Low peg mounts from JNS Engineering. Your choice of a straight 1.5" drop or get that drop and a 1" rearward offset. You can use your stock pegs or click on one of the optional pegs that are made to fit the stock DR650 mounts.

These heavy duty steel mounts are pressed, welded and then powdercoated black for protection. Includes mounting bolts.

Note: These mounts are compatible with the SW Motech Center Stand by adding a 1/8" spacer behind the mounts.

Low peg mounts from JNS Engineering. You can use your stock pegs or aftermarket pegs with these T7 mounts.

These offer a 24mm drop & 24mm rearward offset.

Note: Not compatible with the factory center stand.

These low peg mounts will drop your footpegs 1.5" and move them to the rear 1" for a much more comfortable riding position, especially for taller riders. Unlike relocation plates, these mounts do not hang dangerously below the frame. You can mount stock or aftermarket pegs and they are compatible with all skid plates, crash bars, and center stands.

New 10.9 high strength mounting bolts are included. Once installed the foot controls will need adjustment and the brake switch spring will need to be slightly modified.

Made from 1/8" thick stainless steel with dual folded edges for additional strength, these brackets will relocate your passenger pegs down 4" and move them back 1.5". This will give your passenger additional legroom making two-up riding much more comfortable.

All hardware is included for a quick and easy installation.

These footpeg heads are bike model specific and are required to install Puig footpegs to your bike.

• Allow for custom positioning of your new Puig footpegs
• Sturdy construction

The SW-Motech centerstand has been improved with a long foot lever to help get your beast up on this stand. Whether it be fixing a flat on the trail or just lubing your chain in the garage, nothing like a centerstand. Bound to pay for itself in saved time very shortly.

T-Rex stands are made from steel tubing finished in black powder for durability. Back by a 3-Year limited warranty for any material or manufacturing defects. Rest assured that you are getting best material commercially available.

Greatly eases basic chain maintenance, tire changes, parking, cleaning, etc. All necessary hardware is included. Installs using basic hand tools.

Warp 9's  top of the line Adventure Pegs. a full 4" long and 2.5" wide will give your feet the perfect perch whether you are cruising down the highway or standing up.

• Ceracote coated Chromoly steel pivot for the ultimate in strength
• Replaceable 7075 T6 Aluminum Platform
• Permanent Stainless Teeth provide the ultimate in non-slip traction
• Built-in bottle opener in the bottom

Replace those narrow heavy OEM foot pegs with the ZETA Racing aluminum foot pegs. When you are on your dirt bike a stable platform when riding is important. The aluminum foot pegs offer a wider platform and the spikes offer more traction for your foot preventing you from slipping. Over all it offers more control on your bike. Made from CNC machined A2014 forged aluminum and stainless pins.

Light weight and strong. These DRC foot pegs have a wider platform for increased comfort and control. Cast from Chromoly steel for unbeatable strength and durability.

This is the ultimate adventure bike platform, it measures 2.25" wide, 4.75" long.

Patented adjustable collars make it easy to run them in the stock or lowered positions on most bikes.

Gain more room for bulky boots, or for longer legs. Fastway Adventure pegs come with two sets of F3 cleats, one standard, one long. Kamber bolts lets you adjust the 'tilt' of your pegs to increase comfort, or to give better squeeze on your bike.

Kit includes required fit kit.

Light weight and strong. These DRC foot pegs have a wider platform for increased comfort and control. Cast from Chromoly steel for unbeatable strength and durability.

New from Warp 9, top of the line Adventure Pegs. a full 5" long and 2.5" wide will give your feet the perfect perch whether you are cruising down the highway or standing up hammering down a single track trail.

• Ceracote coated Chromoly steel pivot for the ultimate in strength
• Replaceable 7075 T6 Aluminum Platform
• Permanent Stainless Teeth provide the ultimate in non-slip traction
• Built-in bottle opener in the bottom!

  NOTE: These pegs DO NOT fit the '18 model!

New from Warp 9, top of the line Adventure Pegs. a full 5" long and 2.5" wide will give your feet the perfect perch whether you are cruising down the highway or standing up hammering down a singletrack trail.

• Ceracote coated Chromoly steel pivot for the ultimate in strength
• Replaceable 7075 T6 Aluminum Platform
• Permanent Stainless Teeth provide the ultimate in non-slip traction
• Built-in bottle opener in the bottom!

Features:

• Wider, lighter, stronger design
• Widest (mm) and lightest pivoting pegs on the market
• Upgraded heavy duty, long life springs
• Unique multi-directional grip pattern
• Outstanding build quality
• Lifetime Warranty*
• Made in USA
• Expanded motorcycle fitment range
• Overhaul kit includes: 2 pivot bushings, 2 pivot tension springs, 2 lock nuts, 2 washers, 6 o-rings, 2 split pins and instructions

• Wider, lighter, stronger design. Platform is 60mm wide x 100mm long, overall approx length from center of footpeg pin to end of peg is 115mm
• Widest (mm) and lightest pivoting pegs on the market
• Upgraded heavy duty, long life springs
• Unique multi-directional grip pattern
• Outstanding build quality
• Overhaul kit includes: 2 pivot bushings, 2 pivot tension springs, 2 lock nuts, 2 washers, 6 o-rings, 2 split pins and instructions

Pivot Pegz have set a new standard in footpeg performance and quality and now they are even better. The new Mark 4 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 4 also incorporates new heavy duty, long life springs and they come with a lifetime warranty.

Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever!

• Mega wide 60mm platform
• Widest and lightest pivoting pegs on the market
• Open design = less mud packing
• Unique multi-directional grip pattern
• Outstanding build quality
• Race proven design and durability

Pivot Pegz have set a new standard in footpeg performance and quality and now they are even better. The new Mark 4 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 4 also incorporates new heavy duty, long life springs and they come with a lifetime warranty.

Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever.

• Mega wide 60mm platform
• Widest and lightest pivoting pegs on the market
• Open design = less mud packing
• Unique multi-directional grip pattern
• Outstanding build quality
• Race proven design and durability

These pegs from SW Motech are a very cost effective way of getting a much larger footpeg than stock under your feet (2" by 3"). The removable and replaceable rubber cover is a another great feature. It helps isolate vibrations through your feet on those long highway jaunts but you can remove it in a few minutes when you get into slippery conditions that require better traction. Last but not least, you can change position a full 15mm. Two mount holes where the peg bolts to the mount allow that much adjustability. Entire peg mounts right up to your stock frame foot peg mount, no modifications necessary.

The pegs are made out of stainless steel and attach to a CNC machined aluminum bracket that goes into your stock mounts on your DL. These can replace your worn out stock pegs, give you a rubber peg when needed and a serrated edge when needed and look great doing it, what more could you ask for?

Aftermarket foot pegs from our friends at Warp 9. Made from light weight T-6 aluminum and stainless steel teeth. These have an extra wide platform as well as the Exclusive "X" bridge that adds 2 center teeth for added grip.

• More comfortable because they're wider than stock
• Serrated for positive footing
• Made from special case-hardened steel
• Finish may vary

Pro-Series foot pegs are made of stainless steel and are hard coated to prevent drooping. These pegs are 50mm x 75mm. Lo-pegs are down and back 1/4".

The new Fastway Evolution AIR footpegs are now the ultimate pegs in the Universe.

Designed and sculpted out of the best 7075 Billet aluminum by Pro Moto Billet elite engineers and machinists. Featuring Fastway's Patented adjustable height, traction, and camber options, the Evolution AIR footpegs are superior in every way. Fastway Evolution AIR pegs are designed to shed mud and debris, while being ultra strong.

You can also order serrated or spiked cleats separately. See images.

These AIR pegs are offered in several colors, but some colors may require extra time, call for availability.