We are now accepting submissions for this year’s Calendar Photo Contest! Please upload your images here by 9am Pacific on September 16, 2025.
This 3rd gear set is made for us by Nova Racing Transmissions in England to replace the fragile stock third gear set. These folks build complete transmissions for World Superbike teams among others, so we believe them to be highly qualified to build this set of replacement gears.
These gears are made from a high quality special alloy steel and then heat treated and superfinished. The mainshaft drive gear and the countershaft driven gear are sold only as a set.
Is your Honda XR650L experiencing power loss, chain slippage, or damaged countershaft splines? A thin countershaft sprocket creates concentrated wear on the countershaft splines, a common problem that affects power transmission and can lead to costly engine damage.
This genuine Honda OEM countershaft is the factory-exact replacement for XR650L models, engineered to restore your bike's original performance and reliability.
When replacing your countershaft, this is the perfect opportunity to upgrade your 2nd and 5th gear ratios with Honda NX650 gears - a highly sought-after modification that significantly improves the XR650L's gear spacing and overall rideability. The NX gear swap is considered one of the most worthwhile upgrades for the XR650L, providing better gear ratios for both street and off-road riding. Choosing genuine OEM parts ensures high quality and effectiveness, with components identical to what came stock on your bike when it was built.
Don't risk further transmission damage with worn splines - this authentic Honda countershaft provides the precise fit and durability your XR650L demands. Perfect for riders experiencing countershaft spline wear, transmission problems, or planning preventive maintenance and performance upgrades on their dual-sport motorcycle.
Compatible with all XR650L years and essential for maintaining proper chain drive alignment and power transfer.
Heavy-Duty clutch springs
GoldPlug is the gold standard in engine protection.
Stainless steel drain plug with an extremely strong magnet that picks up metal flakes in your oil.
14mm Thread
Solid reliability and easy installation. This manual tensioner is a good upgrade for any modified motor, especially if it is ridden hard.
A new gasket is included.
This is all you need to not only change your oil, but protect your motor as well. We include a billet oil drain plug cap, a 5-pack of oil filters, and new O-Rings to replace any you have that may be leaking or worn.
Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.
What's included and what's not included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.
The MadStad adjustable brackets sit out in front of your fairing on black fly screen which attaches in place of the factory shield. With the windshield now separated from the front of the bike and the fly screen helping to deflect wind up from underneath, you have total control over the shield height, angle and airflow. This lets you dial in a smooth ride and quieter cockpit far better than any fixed windshield can provide.
Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.
What's included and what's not included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.
The MadStad adjustable brackets sit out in front of your fairing on black fly screen which attaches in place of the factory shield. With the windshield now separated from the front of the bike and the fly screen helping to deflect wind up from underneath, you have total control over the shield height, angle and airflow. This lets you dial in a smooth ride and quieter cockpit far better than any fixed windshield can provide.
Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.
What's included and what's not included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.
The MadStad adjustable brackets sit out in front of your fairing on black fly screen which attaches in place of the factory shield. With the windshield now separated from the front of the bike and the fly screen helping to deflect wind up from underneath, you have total control over the shield height, angle and airflow. This lets you dial in a smooth ride and quieter cockpit far better than any fixed windshield can provide.
Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.
What's included and what's not included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.
The MadStad adjustable brackets sit out in front of your fairing on black fly screen which attaches in place of the factory shield. With the windshield now separated from the front of the bike and the fly screen helping to deflect wind up from underneath, you have total control over the shield height, angle and airflow. This lets you dial in a smooth ride and quieter cockpit far better than any fixed windshield can provide.
Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.
What's included and what's not included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.
The MadStad adjustable brackets sit out in front of your fairing on black fly screen which attaches in place of the factory shield. With the windshield now separated from the front of the bike and the fly screen helping to deflect wind up from underneath, you have total control over the shield height, angle and airflow. This lets you dial in a smooth ride and quieter cockpit far better than any fixed windshield can provide.
Does not fit the Standard Africa Twin 1100, only fits Adventure Sport.
Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.
What's included and what's not included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.
The MadStad adjustable brackets sit out in front of your fairing on black fly screen which attaches in place of the factory shield. With the windshield now separated from the front of the bike and the fly screen helping to deflect wind up from underneath, you have total control over the shield height, angle and airflow. This lets you dial in a smooth ride and quieter cockpit far better than any fixed windshield can provide.
Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.
What's included and what's not included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.
The MadStad adjustable brackets sit out in front of your fairing on black fly screen which attaches in place of the factory shield. With the windshield now separated from the front of the bike and the fly screen helping to deflect wind up from underneath, you have total control over the shield height, angle and airflow. This lets you dial in a smooth ride and quieter cockpit far better than any fixed windshield can provide.
Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.
What's included and what's not included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.
The MadStad adjustable brackets sit out in front of your fairing on black fly screen which attaches in place of the factory shield. With the windshield now separated from the front of the bike and the fly screen helping to deflect wind up from underneath, you have total control over the shield height, angle and airflow. This lets you dial in a smooth ride and quieter cockpit far better than any fixed windshield can provide.
A stainless steel front fender brace. Helps stabilize your front fender.
Gives additional strength for carrying a fender mounted tool bag.
Fits on top of the fender and bolts between the fender and bottom triple clamp. Stainless steel won't rust or corrode. Includes hardware.
Requires you to drill one hole in the fender for mounting.
The ABUS SmartX 8078 3D Alarm Disc Lock offers advanced Level 18 security, combining cutting-edge technology with exceptional protection for your bike.
Featuring a 13.5mm double-locking sliding bolt made from specially tempered hardened steel, it delivers superior resistance to tampering.
The 3D motion-sensing alarm emits a powerful 100dB sound to deter unauthorized movement, while the SmartX Bluetooth keyless lock system provides ultimate convenience. It seamlessly connects to the ABUS SmartX App, allowing you to monitor lock, alarm and battery status in real-time.
The USB-C rechargeable battery ensures long-lasting performance and multi-color LED lights with audible signals keep you informed. The lock also features location memory from the last pairing, providing added peace of mind.
Adventure bike heaven is off-road headed down a dirt road or a trail. If that is your dream, then as you know, you are going to fall. Sometime, someplace, it will happen, so be prepared! Save your bike before it happens.
SW-Motech makes some of the finest protection equipment available. The set-up for the Twin is available in a standard black powder coating or a semi-polished Stainless-Steel tubing. Both sets will protect the vital components of your motorcycle as well as you from damage incurred during a fall, slide or crash. They will preserve the frame, radiator, bodywork and other critical components from touching down with robust tubular steel. The black kit uses 27/21 mm tubing while the Stainless uses straight 22 mm tubing throughout.
Both configurations have a tight fit for great ground clearance and are designed to work seamlessly with other SW-Motech products like their Skid Plate/Engine Guard and SW-Motech Hawk light mounts. Three secure mounting points per side provide the necessary support that make these so strong. There is no drilling, cutting, welding or any other modifications required for mounting but still allows access to the oil filler, tool box and battery. Kit includes all necessary hardware and instructions and an aluminum cover to replace the OEM plastic cover at the lower mounting point on the left side.
CNC Machined high quality aluminum folding levers.
Lever folds outward to prevent breakage in the event of a crash.
Automatic lever position restoration provides quick recovery from the crash.
Ultra precision machine cut for super light weight construction, high precision and quality.
Available in 3 and 4 finger lever lengths to fit your riding style.
Made of durable aluminum for extreme strength. Titanium color anodized finish.
Sold Individually
CNC Machined high quality aluminum folding levers.
Lever folds outward to prevent breakage in the event of a crash.
Automatic lever position restoration provides quick recovery from the crash.
Ultra precision machine cut for super light weight construction, high precision and quality.
Available in 3 and 4 finger lever lengths to fit your riding style.
Made of durable aluminum for extreme strength. Titanium color anodized finish.
Sold Individually
Original Suzuki factory replacement levers for your V-Strom DL650.
The MAGURA HYMEC hydraulic clutch system gives you an ease and smoothness of pull that cannot be equaled by a cable unit. No need to lube the cable, no more broken cables. The HYMEC is simply a fantastic hydraulic retrofit clutch system. You will be able to get away with applying a lot less pressure than with a standard cable clutch. Depending on riding style, this can make for huge benefits in terms of riding comfort and control. The master cylinder control naturally has reach adjustment.
The advantages of the MAGURA hydraulic clutch are many:
MAGURA favors use of their 'MAGURA Blood' for its clutch systems. Mineral oil is non-toxic and not hygroscopic. Regular changes of the clutch fluid are not required.
Replacement folding shift lever, stock length made by IMS.
Quality replacement levers. Standard length.
OEM Honda Shift Lever.
OEM Style aftermarket replacement brake and clutch levers. Standard length.
Available as a set or individual.
Please notice that this set is for '90-'09 DR650.
Moose Racing has teamed up with Hammerhead to bring you the ultimate shift lever. The forged shift lever arm is manufactured from aircraft-grade 6061 aluminum and anodized in a matte finish. The shift lever tip is a finely machined full CNC part with stainless steel spring and anodized with UV protection to preserve color.
Warp 9 has created a beautiful brake pedal machined from billet aluminum to an 8mm thick work of art. A stainless steel pin eliminates wear in the frame. This pedal has the ability to move the spring loaded brake tip 10mm either way from the center position. The arm is arched to provide clearance for riders who have the lowpeg + centerstand combination.
Mounts to existing signal brackets to move the front turn signals up and forward to clear the bigger 5.3 & 6.6 gallon Acerbis tanks.
ProCycle side panel guards to keep your saddlebags from fouling the side covers. Constructed from mild steel tubing that is powder coated black for nice long lasting good looks.
Add your favorite set of saddlebags for a very economical luggage solution.
Genuine Yamaha right side panel.
Right side only, in black. Small crack in the plastic towards the back. Does not affect mounting or fitment, sold as is.
Not in original packaging, EK 520x112 O-Ring chain with new clip style masterlink. Test fit, sold as is.
High Quality chain. Will need to be cut to fit your sprocket combination.
Minor install marks, does not affect quality or performance. Sold as is, in original packaging includes hardware.
The SW-MOTECH Rear Brake Master Cylinder Guard is designed to fit the Yamaha Tenere 700. This guard protects the rear master cylinder from impact and prevents the foot from contact. A laser-cut and precision bent aluminum strengthening process makes the construction tough and durable and capable of withstanding heavier blows.
Features:
Use in conjunction with Moose Racing Adventure Bike Rear Racks. Plate only, Top Rack sold separate
Maximize your Kawasaki KLX250 or KLX300's cargo capacity with T-Rex Racing's heavy-duty luggage rack grab bar system. This robust steel rack provides secure mounting points for tail bags, cargo boxes, and camping gear while doubling as passenger grab bars for two-up riding.
Precision-engineered for KLX250 and KLX300 models, this bolt-on accessory features powder-coated finish for corrosion resistance and maintains the bike's adventure-ready aesthetic.
Easy installation with included hardware makes this essential upgrade perfect for adventure touring, dual-sport camping, and long-distance riders who need reliable cargo solutions for their Kawasaki motorcycle adventures.
Original Kawasaki factory replacement levers for your Versys-X 300.
Original Kawasaki factory replacement levers for your KLX230.
Protect your motorcycle's levers from damage during an impact with the solid protection offered by Barkbusters aluminum bar lever protection handguards. Constructed with solid, heat treated aluminum backbones, these hand protectors use a two point mounting system that provides strength to withstand plenty of force. Motorcycle handguards by Barkbusters with their full wrap design, will help keep your levers operational and your ride from coming to a premature end in the event of a drop or other mishap.
Features:
Add Plastic Handguards for a complete kit.
Adventure bike heaven is off-road headed down a dirt road or a trail. If that is your dream, then as you know, you are going to fall. Sometime, someplace, it will happen, so be prepared! Save your bike before it happens.
SW-Motech makes some of the finest protection equipment available.
Please Note that these Crash Bars are also compatible with the SW-Motech Skid Plate and the SW-Motech Centerstand.
The upper crash bars are constructed of black, powder-coated steel and are mounted as a supplement to the lower crash bar by SW-MOTECH.
The elements developed exclusively for this motorcycle seamlessly fit the look of the vehicle and guarantee easy mounting. The upper crash bars mainly protect the fairing of the motorcycle and give the motorcycle an individual look.
Safeguard your Kawasaki KLX250 or KLX300 with T-Rex Racing's premium engine guard crash cages designed for serious off-road protection. These heavy-duty steel crash bars create a protective barrier around your engine and frame, preventing costly damage from drops, crashes, and trail obstacles.
Custom-engineered for KLX250 and KLX300 models, these bolt-on engine guards feature powder-coated finish for corrosion resistance and maintain ground clearance for optimal performance.
Includes all mounting hardware. Essential protection for adventure riders, trail enthusiasts, and dual-sport motorcyclists who demand reliable crash protection for their Kawasaki bike.
XT250 engine Case Guards.
These are a very nice addition in engine protection for the XT250. Made from billet aluminum and steel powder coated bracketry.
An Oil Cooler Guard we can get behind. Laser cut from 0.125" thick 5052 aluminum, CNC formed and powdercoated black.
Designed to fit the stock mounting holes perfectly, most riders will have this in place in minutes. Don't get stuck in the middle of nowhere with a punctured oil cooler.
The IMS Super Stock pegs are the perfect choice for both the daily commuter and the rider-in-training. Their mellow tooth design keeps you planted while preventing wear on your soles. They are also perfect for young riders who don't need or want a more aggressive option.
Wider foot pegs for sure-footed comfort.
17-4 cast stainless steel.
| Width | 1.97" |
| Length | 3.18" |
Looking for motorcycle road trip ideas? How about the best dirt roads by state? Each of the Adventure Series maps highlight the best dirt roads, taking you off-road through some of the most spectacular scenery in the United States.
The GBrakes steel braided brake lines for the T7 replace the stock rubber lines to enhance braking performance. Stock rubber lines expand under pressure giving a spongy and inconsistent feel at the lever/pedal.
This kit includes all 7 lines involved in the ABS braking system front and rear. These high quality lines utilize the finest materials available to eliminate expansion: Teflon inner hoses wrapped in 64 strand staInless steel weave, heavy duty hardware and machined fittings. A Crush Washer relief channel provides an effective double seal to stop leakage. Each line is replaced from the master cylinder all the way to the calipers and labeled to help with installation.
All the parts of this kit are designed, engineered, manufactured, tested and quality assured in the USA! All of these parts come with a lifetime warranty. Everything needed is included: Brake Lines, fittings and all necessary hardware and detailed instructions. Clear coated lines and silver fittings are the default setup, other color options are available upon request, please call for options.
Premium 250MM floating brake rotor for Yamaha WR250R. Direct bolt-on replacement with 6-bolt M6 configuration.
Enhanced braking performance, superior heat dissipation, and improved durability for street and off-road riding. Professional-grade floating rotor design prevents warping and delivers consistent brake feel.
Perfect WR250R brake upgrade at exceptional value compared to OEM parts. Engineered specifically for WR250R brake system compatibility.
Premium 230MM rear brake rotor for Yamaha WR250R/WR250X. Direct bolt-on replacement with 6-bolt M6 configuration and 3.6MM thickness.
Enhanced rear braking performance and durability for street and off-road riding. High-grade steel construction delivers reliable stopping power and long-lasting performance.
Perfect WR250R rear brake upgrade or replacement rotor. Engineered specifically for WR250R/WR250X brake system compatibility at an exceptional value.
Premium 310MM floating brake rotor for the Suzuki DRZ400SM. Direct bolt-on replacement with 6-bolt configuration and 3.8MM thickness.
Enhanced braking performance, superior heat dissipation, and improved durability for street and supermoto riding. Professional-grade floating rotor design prevents warping and delivers consistent brake feel.
Perfect DRZ400SM brake upgrade at exceptional value compared to OEM parts. Engineered specifically for DR-Z 400 SM brake system compatibility.
Made of flame-laminated dual-layer foam, bonded with the highest quality glue to stand up to the roughest and toughest of any style of riding or terrain
This filter, used with No Toil foam filter treatment, provides the best air filtration system in the world
Genuine Honda replacement air filter for the XL750 Transalp
Replacement filter only. Must have Twin Air filter cage for proper installation.
Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.
Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.
Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.
Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.
Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.
The rubber coated outside diameter creates an optimum seal at the hub.
Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.
| Description | QTY per Kit |
| Ball Bearing | 2 |
| Seal | 2 |
Wheel bearing kit contains all of the bearings and seals required to re-fit a wheel.
Wheel bearings typically fail from water and dirt contamination. These wheel bearing were developed in partnership with KML Bearing and is designed for the difficult operating environment of the Power Sport industry.
Premium EMQ quality, hi-speed-bearing featuring low drag, double lip rubber seals which provide superior exclusion of water, dirt and to improved grease retention.
Type TC Nitrile Elastomer wheel seals are specifically designed to keep out water and dirt.
Packed with Chevron SR1-2 high-performance grease with rust and oxidation inhibitors.
The rubber coated outside diameter creates an optimum seal at the hub.
Steel garter spring guarantees constant pressure on the axle shaft over the life of the seal.
| Description | QTY per Kit |
| Ball Bearing | 3 |
| Seal | 2 |
Reduce exhaust leaks with this new OEM exhaust gasket. This gasket goes between the header pipe and the cylinder head.
We recommend Anti-Seize on exhaust fasteners.
Reusable billet aluminum muffler joint gasket. Factory joint gaskets usually cannot be removed from the pipe without damage. This one can be used over and over again. Pays for itself the first time you need to remove you muffler during service or repairs.
Everything you need to get you back out on the trail.
Race Tech HP Springs have a high stiffness-to-mass ratio. In other words; the springs are light weight for their particular spring rate. This requires the finest materials and processing. Shot-peened and pre-set so they cannot sack out. All Race Tech HP Springs have the highest rate tolerances in the industry. These are the finest springs in the world-guaranteed.
This spring is 6.4kg/mm
OEM spring rate is 5.6kg/mm.
Billet aluminum lowering links. Lowers the rear suspension.
Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.
Acerbis fuel tanks were designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service. Stock tank is 4.5gal
Have your tank cushions worn out over the years? Have you lost one or more while working on your bike? We have new upper and lower tank cushion rubbers.
This kit includes the original hardware, upper, and lower cushions.
Designed to enhance the appearance of your motorcycle, yet provide greater riding distance per tankful. Larger capacity than stock, yet very slim and sleek. Perfect for wherever your adventure takes you! This tank is made from POLYETHYLENE CROSSLINK for extra strength and durability.
Fits carbureted models only
The Acerbis Chain Guide Block easily replaces the entire OEM unit and ensures durability and high resistance to shock and wear from the chain.
Made of PA6, it is made of two parts that allow installation without removing the chain.
100% PA6 construction
These quality sprockets are made from the finest 545C high carbon steel and are then heat treated and hand finished to meet or exceed OEM standards. Outlasts many mild steel or surface hardened sprockets as much as two and three times over.
Genuine Kawasaki Rear Sprocket. Size 57T
Seat Concepts dual-sport / adventure seat-kits incorporate a wider seating area for the rider, which results in a more even weight distribution, while reducing pressure points. Each individual seat model was specially designed to increase comfort without compromising ride ability.
Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
Available as a Foam & Cover Kit for install on OEM pan.
Recover that shredded or faded stock seat cover with this Moose Racing cover.
This is only the cover material. Designed to fit over your stock seat pan and foam.
Strong marine-grade vinyl that's made to last. UV protected from sunlight for extended use and has double stitching for extra strength.
Check out the seat warmer we carry. Put this in before tacking your cover in place and keep yourself warm during even the coldest rides. Nothing like toasted buns to make a ride comfortable!
Tirox SnapJack XTrail Pro is a portable and versatile maintenance stand for adventure and trail bikes. This compact, telescoping prop stand is designed to lift your wheel for various tasks, ranging from routine chain lubrication to emergency tire repairs on any surface. No more finding a rock or stick to lift your bike while on the trail.
Introducing Oinker®, the revolutionary chain lube attachment for dirt bikes, street bikes, and ATVs. Say goodbye to messy lubrication. Oinker® attaches to any chain lube or wax, ensuring a precise and even application to both sides of your chain. This means minimal overspray, keeping your swing arm, rear tire, and brakes clean.
*For cans with an attached smart straw, you will need to replace it with the included nozzle
What's Included:
Easily turn your blinkers into additional running lights and brake lights (rear) for added visibility.
White light in the front and red in the rear. Rear red running lights and bright red brake lights. You can omit the running and brake lights if you wish and still have the best blinkers on the market.
Dazzling bright Amber blinker functions.
All in a spring-loaded stock to prevent damage from a tip over, crash or impact with brush, trees etc. They will bend 360 degrees, but are stiff, durable and nearly unbreakable.
Suzuki DR650 Specific plug and play kit using factory connectors, flasher and diode kit included.
Easily turn your blinkers into additional running lights and brake lights (rear) for added visibility.
White light in the front and red in the rear. Rear red running lights and bright red brake lights. You can omit the running and brake lights if you wish and still have the best blinkers on the market.
Dazzling bright Amber blinker functions.
All in a spring-loaded stock to prevent damage from a tip over, crash or impact with brush, trees etc. They will bend 360 degrees, but are stiff, durable and nearly unbreakable.
Kawasaki KLR650 Gen 3 / KLX300 Specific plug and play kit using factory connectors, flasher and block off plates.
There is a lot of technology packed into this tail light/fender eliminator kit. You have programmable turn signals and Safety Brake Pulsing both built into this product.
You can enable or disable the safety brake pulsing feature.
This kit includes only the highest quality components, including the pre-installed 12oClockLabs processor board, which is made in the USA.
We recommend a "Fixed Rate Flasher" unit for use with this kit. When you install aftermarket signals it changes the load on a factory signal system.
This kit does not include parts to mount aftermarket turn signals. The pre-installed processor board allows the turn signals to be integrated in to the tail light.
There is a lot of technology packed into this tail light/fender eliminator kit. You have programmable turn signals and Safety Brake Pulsing both built into this product.
You can enable or disable the safety brake pulsing feature.
This kit includes only the highest quality components, including the pre-installed 12oClockLabs processor board, which is made in the USA.
We recommend a "Fixed Rate Flasher" unit for use with this kit. When you install aftermarket signals it changes the load on a factory signal system.
This kit does not include parts to mount aftermarket turn signals. The pre-installed processor board allows the turn signals to be integrated in to the tail light.
Does not fit 2024-2025 Models.
There is a lot of technology packed into this tail light/fender eliminator kit. You have programmable turn signals and Safety Brake Pulsing both built into this product.
You can enable or disable the safety brake pulsing feature.
This kit includes only the highest quality components, including the pre-installed 12oClockLabs processor board, which is made in the USA.
We recommend a "Fixed Rate Flasher" unit for use with this kit. When you install aftermarket signals it changes the load on a factory signal system.
This kit does not include parts to mount aftermarket turn signals. The pre-installed processor board allows the turn signals to be integrated in to the tail light.
Please Note: If you plan on removing any of the OEM Honda turn signals, make sure to get the Fixed Rate Flasher. The Honda OEM flasher relay will ONLY work correctly with ALL Honda LED signals, once you remove any Honda OEM signals; the Honda OEM flasher relay no longer operates correctly.
Yamaha TW200 heavy duty chain guard.
Made from 3/16" laser cut steel protects stock to oversized rear sprockets.
This unique design bolts in the OEM location but rests against the rear axle bearing spacer for massive impact resistance.
This heavy duty DRZ400 chain guard is made of laser cut 1/8” aluminum and finished in textured black powder coating. The formed flange helps keep chain grime off the rear tire.
Mounting hardware included.
Yamaha XT250 heavy duty chain guard.
Made from 3/16" laser cut steel protects stock to oversized rear sprockets.
This unique design bolts in the OEM location but rests against the rear axle bearing spacer for massive impact resistance.
TW200 billet oil drain cap plug.
Nice billet aluminum replacement for the old cast oil drain cap.
These super bright, white LED lights come with a clear or black housing and include studs and hardware to facilitate an easy installation.
Measures 1-3/4 in.W x 3/8 in.H x 3/4 in.D
Plug-In connector kit for your CRF. This kit fits Rally and Non-Rally Versions of the Motorcycle. Wires and terminals will come pre-attached with subharness.
Plugs into the Aux Power connector.
Harness length is 32" (2.66ft)
