Replace these any time you feel excessive play in the sprocket hub.
Excessively worn dampers can cause the cush hub bearing to fail - which will ruin your sprocket carrier.
Sold as a full set.
For easy removal of recessed oil filters.
Conical point screws pierces and grabs the metal end cap of the filter.
Reduces potential damage to the engine cases.
NOT for use on re-usable oil filters.
GBrakes Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.
The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.
Dust/waterproof synthetic/petroleum blend for foam-type air filter elements. Super-tacky polymer and co-polymer additives hold onto virtually all fine particles.
Designed for use with stock engines using either stock or aftermarket exhaust and air filters.
A quality foam Air Filter to replace the stock one. Uses the same guide and frame as the stock unit. It requires foam filter oil to properly trap dirt particles. Don't forget the Evolution Air Filter Oil kit from No Toil.
Genuine Yamaha OEM Replacement airfilter. Designed to increase horsepower and acceleration while providing excellent filtration.
OEM Suzuki Float Bowl Drain Screw for the stock BST40 carburetor.
RotoPax holder made to mount a single Fuel and/or Water container.
Need to mount two containers? A water and a fuel? Two waters? Get the extender which allows you to stack two containers no problem! Single mount, two containers
RotoPax are Rotational Molded - the process which produces indisputably superior products.
Need to mount two containers? A water and a fuel? Two waters? Finally, you can stack multiple packs together! Use in conjunction with a pack mount. You will need to purchase the Single Mount as well as the Extender.
High Quality chain. You'll need to cut to fit your sprocket combination.
Non O-ring, Clip Style Master link
Genuine factory shop service and repair manual. This is the reference manual Yamaha dealers use in their service departments. It has all the necessary info to do any maintenance or repairs to your XT250.
Clymer repair manuals provides step-by-step procedures based upon the complete disassembly of the motorcycle. This hands-on experience combined with extensive research results in a manual that is both user-friendly and detailed. Hundreds of original photos and illustrations guide the reader through every job.
The genuine factory shop service and repair manual. This is the reference manual Yamaha dealers use in their service departments. It has all the necessary info to do any maintenance or repairs to your WR250R or X.
Hardened chrome vanadium steel with built in rubber insert to hold spark plug steady.
Thin wall bi-hex sockets designed to access narrow spark plug holes.
These low peg mounts will drop your footpegs 1.5" and move them to the rear 1" for a much more comfortable riding position, especially for taller riders. Unlike relocation plates, these mounts do not hang dangerously below the frame. You can mount stock or aftermarket pegs and they are compatible with all skid plates, crash bars, and center stands.
New 10.9 high strength mounting bolts are included. Once installed the foot controls will need adjustment and the brake switch spring will need to be slightly modified.
Order up your new levers here! If you keep breaking levers, you might want to think about a set of hand guards to protect them in case of a fall.
Always a good idea to put in a new set of Oil Change O-Rings at the first sign of any leakage. This package gives you the three most important: oil filter cap and the one behind the filter as well as the one on the filler cap. All are new OEM Suzuki O-Rings.
Providing unbeatable performance and exceptional value, Hiflofiltro is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.
Grab our 5-pack and save both time and money!
Fresh o-rings ensure a tight seal and no oil leaks.
Oil Change Kit includes O-rings for: Filler Cap, Filter Cover, Strainer Cap and Filter Seal.
Valve Inspection Kit includes O-rings for: Valve Inspection Caps, Timing Inspection Cap and Timing Plug Cap.
Honda XR650L Transmission Wide Ratio Upgrade Kit by ProCycle - Complete NX650 Gear Conversion
Transform your Honda XR650L's performance with ProCycle's complete transmission upgrade kit featuring proven NX650 gear ratios. This comprehensive package includes genuine OEM Honda 2nd gear and 5th gear from the legendary NX650 transmission, delivering superior power delivery and smoother shifting across all terrain. This upgrade reduces the large gap between 1st and 2nd gear and makes 5th gear a taller overdrive for lower RPM's on the highway.
Complete Kit Includes:
Key Benefits:
Perfect for XR650L owners seeking improved transmission performance, DIY mechanics, and professional shops. Upgrade to the superior gear configuration that made the Honda NX650 famous for its balanced power delivery and versatility.
| Gear | Stock | Upgraded |
| 1st | 2.66:1 | 2.66:1 |
| 2nd | 1.65:1 | 1.75:1 |
| 3rd | 1.25:1 | 1.25:1 |
| 4th | 1.00:1 | 1.00:1 |
| 5th | 0.84:1 | 0.80:1 |
Stock OEM replacement shift lever from Kawasaki.
Nomadic Rack for the TW200. CNC laser cut from 3/16" 5052 aluminum with a large 12 x 10-7/8 mounting surface area. Sand blasted and then powder coated black to give it a shot peened look. This rack is an easy installation with a 4 point mounting system with no modifications required. There are multiple strap slots for securing gear bags and cargo. Doubles as a grab handle or tow bar. Is compatible with RotoPax mount. All hardware and instructions included.
You may purchase just the rack or you can order the Rack with the RotoPax Mount. If you really want it all, you can order the Rack, Mount and a Fuel or Water Container.
The PowerBomb header promotes better flow by allowing a small expansion of the exhaust gasses. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels.
This high output stator will allow you to run brighter lights, heated gear, heated grips, etc. From ElectroSport
For the frame drain on your XR650L ,extra protection for your motor! Strong magnet at the end of the plug picks up metallic flakes in your oil, protecting your engine!
Extra protection for your motor! Strong magnet at the end of the plug picks up metallic flakes in your oil, protecting your engine!
Includes 2 drain plugs
Stabilizes gas for short and long term periods of inactivity (up to two years) while preventing the formation of varnish. Eliminates carbon buildup in fuel delivery system and exhaust components. Increases octane and removes water from the fuel, making it the perfect solution to prevent and eliminate ethanol (E-10) fuel problems. 8 oz bottle treats 48 gallons of fuel.
Steel wheel weights replace the old lead ones that are no longer legal in some states. Mount up new tires and make sure they are balanced for a smoother ride and longer tire life.
This is a 60 piece pack, 1/4 oz. weights with adhesive backing.
This street-legal knobby from Pirelli has good stability and cornering precision thanks to the carcass stiffness. The tread pattern optimized for use on dirt and gravel roads, cross-country racing and desert tours. It has lasting off-road performance and knob tearing resistance due to the special off-road compound.
Dunlop designed the D606 tire to be street-legal but with an emphasis on aggressive off-road riding and great durability. A full-depth tread pattern designed for rigorous off-road use yields excellent traction on everything from hard-packed fire roads to soft single-track trails. At the same time, the D606's tread compound is engineered for good highway durability and grip.
The Dunlop D606 is R rated (max speed of 106 mph)
We offer two different types of SuperMoto tubes. The first are Standard Tubes and are meant to be used with standard bias-ply type tires, but can be used with radial tires also.
But, if you are running radial tires, like SuperMoto, or have a retro bikes with spoked wheels and radial tires, you probably want to run the 'Radial Tubes'. Front tubes fits 120/70 and 120/60 tires. Rear tubes fits 150/60, 150/70 and 160/60 tires. These have a metal valve stem.
Yes, plastic! This is a product from our friends at Acerbis. Ultra tough injection molded reinforced composite. Flexible Heavy-Duty Polypropylene will not effect chassis ability to flex, will not effect handling
It's twice as thick as a metal skid plate but is only half the weight. Plastic glides over rocks and roots better than aluminum. It also reflects less engine noise, bike will run quieter and cooler compared to alloy skid plate. Full coverage, mounts to existing threaded holes at the rear of the frame.
Protect your brake rotor and fork lowers from mud and debris. Choose between black or white.
Requires 7/8" factory bar clamps on bike
These versatile Risers allow you to clamp a 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1- 1/8" aluminum "fatbar". If you are thinking of going to a fatbar after you bend your stock set or just want the versatility and option to run any bar, this is the riser to go with. Reducers lock into risers to insure no slippage between components.
These risers use 8mm bolts. Always check and confirm that your bike has adequate cable and brake line length before installing any handlebar risers.
Anti-Vibration Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations (in these cases we recommend using standard pivoting risers).
This bar kit will raise your hands 5.5" up from the factory riding position. If you are over 6 feet tall, this is the kit for you! It allows for a more natural riding position, no more bent neck and being hunched over the bars. You will be able to ride comfortably and more aggressively by installing this kit.
The ProTaper bars are taller and tapered from 1 1/8" to 7/8" and the braided stainless steel brake line will be a serious improvement to your braking ability. Braking becomes more responsive and firmer while adding a stylish look to your TW200.
Everything you need is in this kit to properly raise your bars:
Designed to seal completely around the cable housing and stop all those messy leaks. With the unit closed and sealed around the cable, your cable gets better lubrication and you waste less lubricant.
Motocross brake rotor featuring ultra lightweight radically profiled contours for great looks, great self cleaning and brake performance. Made with tough and durable heat treated stainless steel. Heat treated to perfection and then diamond ground to micron accurate surface finish and parallelism and will deliver great brakes that perform well and last.
Taillight, brakelight, turnsignals, license plate light & license plate mount. Taillight is DOT approved, turn signals are not. Attaches to the underside of MX Style rear fenders. Turnsignals are embedded in the taillight housing. Wiring instructions included.
*Flushmount signals may require resistors to flash correctly
