Voting is now open for the 2025 calendar photo contest. Click here to vote for your favorite!
Here is a complete kit to install oversized tapered 1-1/8" handlebars on your DR650. Warp9 handlebar clamps bolt to your stock triple clamp adding an additional 1" to the height.
Alloy oversize bars offer more durability and eliminate the crossbar which opens up your dash area for more goodies. Black in color.
Comfortable Oversize (or Fat Bar) Handlebars.
- Black in color.
- Made from 5mm, proprietary, 2000 series T6 aluminum alloy for superior tensile and yield strength.
- Lighter and stronger than regular bars
- No-crossbrace allows flex to reduce shock and rider fatigue
- Oversize 1-1/8" diameter base reduces to 7/8" to allow standard-size controls/grips
- Etched alignment marks for fast and accurate positioning
- Bar pad included
- Works with stock controls and cables.
For bikes with factory 7/8" handlebars these will require the use of a 7/8 to 1-1/8 adapter (sold separate).
CNC machined from 6061 Aluminum by the crew at Warp 9. This upper triple clamp will help to get the bars out of your lap on the XR650L. It allows for six different bar positions (three mount positions and reversible offset mounts). Uses the stock key switch and works with the handlebar lock. Speedometer and indicators all use stock mounting positions as well.
This clamp comes with 1-1/8" bar mounts that work perfectly with the tapered handlebars included. Then there is a new set of ProGrip 714 Rally Grips.
- Extra-thick material for durability
- Legendary Acerbis fit and finish
- Mount easily using included mount kits
- Caps, applicable mount kits, fuel lines, petcocks and Y-fittings per application included as needed; fuel pump for EFI models not included, designed to accept the stock one.
- Works with Acerbis' MDR gas cap
Honda XR650L rear shock upgrade. The experts at Cogent Dynamics know suspension! A proven performance rear shock for your XR650L for use under the most demanding conditions and on the roughest terrain worldwide.
Damping rates optimized to your specific needs, giving you the best ride comfort, traction and control. Frequency and velocity sensing valving works great over wide ranging conditions. Low internal friction. All CNC machined components for top quality and performance. Compact and rigid design with internal separator piston. Adjustable for spring preload and rebound damping. Fully serviceable shock is designed for the long haul.
*Spring color may vary due to specification requirement and availability.
Standard Spring | 10.71 kg/mm |
Heavy Duty Spring | 12.50 kg/mm |
Low Shock | 1.5 inches lower |
Cogent Dynamics builds a fully custom suspension component, just for you. To best meet your needs, please spend a few moments providing us with your riding style (off-road / adventure, or street / commuting) and your approximate weight with gear and luggage in the comments during checkout. The information you provide helps them setup your suspension to most closely meet your needs.
Protect your frame/paint from scuffs and scratches with these great Frame Guards from B&B Engineering Made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All frame guards are supplied with all necessary mountings and stainless bolts. With a polished finish they look great and are easy to install.
The correct spring rate for your weight will give a smoother more controlled ride. No more bottoming and better traction and confidence off-road. Kit includes required adapter collars
Stock Shock Spring 7.28 kg/mm
*Spring color may vary due to specification requirement and availability.
New wider seat to help keep comfortable on that long commute or dual sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike.
Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan.
Width: | 10.5" (267mm) |
Height: | Same as OEM |
These Cogent Drop-in Dynamic Cartridges will vastly improve both the compression and rebound damping of your stock forks. These units have been given the seal of approval by the ProCycle staff for both performance and ease of installation. No disassembly of your forks, no drilling of damper rods. Just change the oil over to 5w and install the DDCs under the springs and hit the trails.
DDC Tool will not work with this spring series
Included in this kit are .43 kg/mm Race Tech straight rate fork springs, Cogent DDC (Drop in Damper Cartridge) performance cartridges and two bottles of 5w fork oil.
Due to the small diameter of the KLX140 fork springs, the DDC Installation Tool will not work in the normal way on these bikes.
Make the Edge-2 installation as easy as possible with an Optional Connector Set. This allows you to put an OEM style connector on the Edge Taillight making the connection simple. Stock plug will go right into this unit and off you go. Will need a crimp tool or set of needle nose pliers to crimp connectors on.
TechSpec's line of motorcycle tank grip pads will help you improve the relationship between you and your machine! The ability to squeeze the tank and feel a solid seat position is very comforting. Hard braking maneuvers no longer send you into the tank.
The Snake Skin material is their 'Premier Product' at just .125" thin. This precut kit includes three pieces: right & left tank grips and a center tank piece.
- 4.75" wide,
- Raises handlebars 2 inches and allows fore/aft position adjustment
- Provides dual pivot points for optimal bar positioning
- One piece design is made from solid aluminum for superior strength
- Available for 7/8" - 7/8" or 7/8" - 1 1/8" bars
Requires 7/8" factory bar clamps on bike
Auxiliary fuel tanks mount to handlebars, forks, or rear racks.
- Suitable for minis, trials bikes, full size bikes, and anywhere else a little extra fuel is needed.
- Each tank includes a siphon kit that connects the tank to the main fuel tank and automatically siphons fuel while the bike is being ridden.
- With this design, the auxiliary tank empties first, before the main tank.
- Does not interfere with headlight, handguards, rear seat, etc.
B&B Off Road Engineering Fender Brace is made to help support your front fender/guard. Also helps support and reduce fatigue from constant vibration.
Made from 4mm 5083 structural aluminum plate. If you wanted to carry a small tool bag this would be a perfect product to support the weight and strap the bag to.
Fits on top of the fender and bolts between the fender and bottom triple clamp. Requires you to drill one hole in the fender for mounting.
If you use Rolie Bags or Rocky Mountain Expedition Saddle Bags, these Stuff-It stuff sacks will make it easier to pack and keep your gear organized.
Stuff-It stuff sacks are sized specifically for each size of Rolie Bag or saddle bag, built just slightly undersized so they’ll slide in and out with ease. You can also mix sizes for more packing options.
HiViz colors make them easy to see and see inside. Draw cord closure. The Stuff-It for Rocky Mtn/EXP Saddle Bags has handles for ease of removal, and can double as a ultralight tote bag.
Rolie Bags and Rocky Mountain Saddle Bags sold separately
All Stuff-Its are sold in pairs.
Fits Small Rolie Bag WP - HiViz Orange
The plastic fitting that secures the stock choke cable to the carburetor is delicate and easily broken. A broken fitting can cause hard to solve idling and running problems.
CNC machined from billet aluminum and anodized black or blue. If you want to retain your handlebar mounted choke this may be the solution.
These no longer fit the new version of the ProCycle Remote Choke Cable. Will not work with the long or short reach choke knobs.
From Shinko Tire, the 705 Series are DOT approved Dual Sport tires designed for 75% street and 25% trail riding. This aggressive tread pattern provides excellent wet and dry weather adhesion.
Note: Tires in the dropdown menu with an -R behind them indicate Radial Tires.
Giant Loop has removed the zipper in the Coyote Saddle bags, and now it is a true roll-top bag. This bag straps on to dirt bikes and dual sport motorcycles, no passenger pegs or racks required. Saddlebag rides on rear fender and/or tail rack.
- Includes 3 Dry Pods equipped with air release valves
- Includes a Hot Springs Heat Shield
- Military-spec materials and construction
- Limited Lifetme Warranty against defects
- Capacity: 39 Liters
The Trail Mirror is a simple solution for any dirtbike or mountain bike. Gives you hindsight when you need it, but you forget it's there otherwise.
- Made from super tough glass reinforced Zytel
- Reflector diameter: 2" (50mm)
- Bar space: 0.75" (19mm), Height 1.25" (32mm)
- Convex lens for wider field of view
Zip ties directly to the bar- no hardware required.
Sold individually
Sargent's proprietary seat foam is their own unique blend of resilience, firmness, and vibration-absorption qualities - making it well suited for maximum long distance comfort. Available in standard height and 1" lower than stock. These seats will fit bikes with the stock, IMS, or any other aftermarket fuel tank.
DRZ400 rack is available in both a Utility and Sport version. The Sport version is 9" x 9" and the Utility is a full 2" longer for added storage space. Both of the S/SM racks have tabs so you can bolt the stock tool bag on.
Please select the rack for your specific model as the differences are significant
- Fully welded construction from 16 gauge mild steel
- Powder-coated black textured finish
- Rigid 4 point mounting system (except off-road model rack)
- Hardware and detailed instructions included
The Windscreens and Deflectors are made from 2.0mm Quantum® hardcoated polycarbonate, and the Windscreens are offered with either a plain edge or an E43R EU-compliant beaded edge. This high quality material, along with state-of-the-art manufacturing techniques, provides outstanding clarity, impact strength and scratch resistance unmatched by any windscreen maker worldwide. Quantum hardcoated polycarbonate is the material of choice for serious motorcycle riders. It is 10X more abrasion resistant than FMR hardcoated polycarbonate, and 30X more than windscreens made from commonly used acrylic or "aircraft plastic”. VStream gets its name from its unique patented shape. The advanced “V” profile and dimensional contours push the wind vortex out and away from the rider's helmet, resulting in a peaceful, quieter riding environment. VStream Windscreens are easy to install and are protected by a 3-Year Warranty against breakage!
Features:
- Fairing-mount VStream® Windscreens are designed specifically for each make and model to ensure optimum performance and perfect fit using the OEM mounting hardware.
Center Screen Height: 13.38" (34.0cm)
Width: 12.50" (31.8cm)
Center Screen Height is from the bottom center edge to top of screen. Width is measured in a straight line across the back at the widest point.
A Radial tire specifically designed for small displacement sport bikes. Advanced belt design and Jointless Band (JLB) rear tire construction utilizes a continuously wound belt for smooth performance and a consistent tire contact patch. Aggressive sport-derived treat pattern for enhanced on-bike appearance.
These tires are all tubeless and H-rated (max speed of 130 mph)
Based on the wildly popular Race Tech Suspension Seminars taught by Paul Thede around the world, this step-by-step guide shows riders how to make their bikes handle like the pros. Thede gives the lowdown on all types of suspension, including cartridge and non-cartridge forks as well as dual-chamber and nitrogen-charged shocks.
The three forces of suspension, testing procedures, even the black arts of chassis geometry: Thede explains it all. The book provides step-by-step photos of suspension disassembly and assembly as well as a detailed troubleshooting guide for dirt, street and track.
This adapter will give you more mirror choices.
Yamaha mirrors have reverse threads on the right (throttle) side of the handlebars. This adapter allows you to mount a mirror with standard 10mm threads on the right side of your handlebar. This opens up many options for your mirrors, choose any 10mm mirror for your Yamaha.
- Torque spec: 5 Nm
Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready!
This is the ENDURO Series TW200 rear rack which measures 10 inches wide and 12 inches long.
Easy to Install
- Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
- Holes are in place to accept Rotopax mount with no drilling required.
- Instructions included, uses stock hardware.
- Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
- Weighs 3 lbs, 10 inches wide, 12 inches long.
- Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
- Rear rack only, no Rotopax mount or side racks included.
- Ready for your 1 gallon Rotopax can and mount
- 1.75 gallon Rotopax fuel can is not recommended with this rack
A nice place to mount auxiliary lights on your KLX where they will be high and easy to reach for adjustment but still tight to the cowlings. They will not interfere with controls, body work or the fuel tank.
Constructed of 1/8" stainless steel they are intended for LED lamps in the 2" range, but with a slight slotting of the mounting holes, will work great with 3" lights as well. Includes longer bolts to for the upper triple clamp mounts.
Billet aluminum lowering links. Lowers the rear suspension approximately 1 to 2 inches depending on application.
*Important when lowering the rear suspension you want to raise the fork tubes in the clamps an equal amount of inches that the rear is being lowered. That way your bike will sit level when done.
Note: We only recommend the 2" lowering links for lighter non-aggressive riders as they allow the tire to rub when near bottoming.
Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.
Some KLR models from 2004 - 2007 may have a longer shank that do not allow the bolts to tighten to the bearing. If that is the case, we recommend the addition of either a 14 mm split type lock washer or a 15 mm flat washer under the nut of both link mounting bolts.
Comfort Cell retains resiliency and doesn't crush down like the stock foam so they can build a lower seating platform. This gives you better ground reach and balanced riding position. For the off-road enthusiast we were sure to leave enough nose to allow you to slide up the tank and get through the corners faster.
As you're seated, the bones in your posterior that take most of your body weight are roughly seven inches apart. Your stock seat at its widest point is about 6.5". This actually makes the foam of the stock seat crush in and applies pressure to the center of your body. The Corbin model is much wider and is built with denser, sculpted foam that supports your body weight over a greater area and equalizes pressure.
On the model shown above, they used their Carbonium material in the seating with contrasting Asphalt vinyl in the side panels. Saddle installation is simple with a tongue in the front and two bolts into the saddle from under the rear fender.
The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides, 'No Welts', black logo. You can view all of the available materials and colors through the link below. If you would like your seat built with something other than the standard choices please state specifics in the comments during check out.
Please allow 3 weeks
Cannot be canceled
Goes on wet but solvent evaporates to leave a dry moly film. This unique dry film won't attract dirt or dust, is highly resistant to water, prevents rust and corrosion. It is the perfect lubricant to use on brake and clutch cables. Includes applicator needle to get into cables, locks and anything else that needs dry lubrication.
- Aramid fibers have high strength-to-weight, thermal stability and abrasion resistance to provide advantages over cheaper steel fiber-based products
- Provide excellent stopping power without noise and rotor galling, even on polished rotors
- Fingertip control and strong, predictable brake response
DOUBLE-H SINTERED METAL PADS
Provide maximum brake effect and last twice as long as organic pads
Feature the HH friction rating – the highest in the industry
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support.
Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Width: | 9 7/8" (251mm) |
Height: | Same as OEM |
Transform your ride
Now there is wind protection for on and off-road use with no compromises! MadStad's new rotating dual-sport windshield brackets put the windshield where you need it for street riding, but tuck it down out of the way for off-road. Adjust the height and angle for much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide, and it's not in your face when you want to hit the trails.
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.
What's included in the kit
- A set of MadStad dual-sport adjustable brackets
- The acrylic windshield
The MadStad brackets bolt to your fork clamps putting the windshield just in front of your instrument cluster for street riding, with adjustability for height and angle. The rotation feature allows you to shift the shield forward and down through 7 different settings bringing it down in front of the head light and out of your way. Their custom knobs lock the brackets in their multiple positions so the shield stays where you want it to, even bouncing around off-road.
Galfer Steel Braided lines have a Teflon tube core and are wrapped with a stainless steel wire braided exterior that prevents expansion under pressure.
The benefit is a firmer brake lever with better feel because the energy that was going into expanding the stock lines now goes straight to the brake pads.
The GPR V5 stabilizer is designed to be "tucked" away under the bars and is still easily adjustable without raising the handle bars too high.
- Kit includes damper, bolt on post mount, below the bar mounting system, and complete instructions.
- Only raises bars about 1/2".
Will only work with Fat Bar style (1 1/8" clamp area) handlebars and stock triple clamp.
This boot goes way beyond our expectations in comfort, protection, quality and affordability!
- Mid-height design
- Full-grain Oiled Leather upper
- DRYTEX lining (Waterproof/Breathable)
- Unbreakable GH plastic buckles
- Ankle TPU internal moulded plastic protection
- Special nylon mid-sole with steel shank
- Anti-bacterial replaceable footbed with APS
- Adventure double density anti slip/rubber sole
- See ADVmoto Magazine's review of this boot below.
LIMITED SUPPLY
These tips are for the Warp 9 Shift Levers only.
These are held to the cast Warp 9 lever with a pin and e-clip making them easy to change out. Includes new pin and e-clip in case you lose yours.
You can also order just a new pin hardware kit which comes with new pin and clip.
The Edge-2 Tail Light and License Plate Holder is a simple bolt-on replacement for the stock unit. Included is an aluminum mount for the light and license plate that is model specific. The light unit uses 16 high-intensity red LED's for tail / stop light function. 3 white LED's are used for license plate illumination.
Included is a set of turn signal brackets that bolt to the mount, but these are designed for a smaller LED type signal with a mounting stud of just 8mm. If you think this might be a problem, look at the Edge-2 Upgrade Circuit Board as this converts your brake light into a functioning turn signal as well!
NOTE: LED's must be installed on a 12 V DC system!
- Holder secures any Garmin handheld device with an integrated spine connection
- RAM® Mounts ball and socket technology allows for near-infinite adjustability
- Made of power-coated, marine-grade aluminum for durability and reliability in the most demanding marine environments
- Backed by a lifetime warranty
- Ball size "B" / "1 inch"
Here is another great upgrade for the TW200 or the VanVan front tire.
Universal 'old school' trials type tread pattern. A versatile performer with a tough nylon carcass and raised dimpled knobs that work well in a variety of terrain.
- Narrow knobby configuration means less of an environmental foot print on the trail
- 4 ply rated
- DOT approved
- Not intended for extended highway use
Tire size is 4.00-18 (64P load / speed rating)
In order to be prepared for all possible mechanical mishaps along the trail or on any adventure, we are required to carry a certain selection of tools. The OBR ADV Gear Tool Roll will help keep those tools together and stored in an organized fashion easy to be found should one of those mechanical mishaps occur.
Features
- Heavy duty ballistic nylon construction
- Heavy duty #8 coil zipper
- Individual Tool Slots for Tire Irons, Wrenches, Screw Drivers … along with a zippered pouch providing secure storage for those smaller items
- Detachable 10”x10” slip pocket cover flap that also doubles as a hub pad keeping your hub out of the dirt when changing a flat
- Open dimensions 11” x 17”
Fuel range and water storage is a concern of every adventurer. Easily carry 2l fuel or water bottles measuring 6”x8.5”x3.5” with the OBR ADV Gear Bottle Holster. The OBR ADV Gear Bottle Holster is a versatile solution to carrying 2l fuel/water bottles anywhere on your luggage kit utilizing existing luggage straps via a series of web loops.
Features
- Heavy duty industrial material construction with high strength UV resistant nylon webbing
- Velcro Back Plate allows for hard mounting using self-sourced appropriate hardware
- SRB buckle strap secures bottles by creating a closed loop over bottle
- Fits bottles measuring 6”x8.5”x3.5”
* Fuel bottle not included
The simplest piece they make, in a 3, 4, 6, 9, 12 or 15 foot length. This is the runner they use on the bag snake and the side bag haulers.
This piece can be added into any luggage hauling scheme you can dream up.
SPECIFICATIONS:
Construction is a simple piece of 1" Nylon webbing with a loop sewn into one end.
They use the 4 foot length in the side bag hauler kits and the 6 foot length in the bag snake kits.
The Go Cruise cruise control mounts over the throttle grip and rests on the brake lever to hold your throttle open, allowing you to stretch and rest your hand on long rides. Installs and removes in seconds with no tools. You can roll off the throttle manually to disengage the Go Cruise.
X3 EVO represents the off-road evolution: LeoVince has combined all its experience in the off-road world with cutting-edge materials and Italian design, enhancing freedom in its purest form.
The X3 EVO body is made of AISI 304 stainless steel with TIG welds handcrafted by specialized operators, to guarantee long-lasting performance. X3 EVO will allow you to face the most extreme environments and conditions because it does not fear water or mud, nor wear over time.
The LV logo is their tribute to a motorcycle culture that we have loved for 70 years and is laser etched on the body of the exhaust: it is as endless as their passion.
They manufacture the end cap in 100% real carbon, with their special 2x2 twill carbon fiber, specifically designed to resist high temperatures and make the X3 EVO even lighter.
The matte clear coating, in addition to enhancing the carbon texture, protects the end cap from wear and UV rays, keeping the X3 EVO always in a perfect shape.
The sound of X3 EVO is already unmistakable at low revs. X3 EVO has a direct interior, specially conceived to channel the exhaust gas in an optimal way, to unleash a deep sound, giving a new voice to your bike.
The X3 EVO's Spark arrester has been tested and approved by the United States Forest Service and is essential for off-road riding in compliance with regulations, with more peace of mind, more respect for the environment and more fun.
An OEM type replacement for the mighty XRL from the folks at Fuel Star. Single inlet that threads directly onto the stock fuel tank. Also works on the adapters that come on some aftermarket large capacity plastic tanks (like IMS).
Kit comes with a new Petcock, O-Ring, Fuel Line and Fuel Line Clamps! Everything you need for a complete fuel connection replacement.
This kit includes LED headlight assembly with plug-and-play wiring harness, a specially designed adjustable steel mounting bracket, and all the required installation hardware.
The headlight features two primary sets of LED projectors, a wide low-beam pattern with distinct upper cutoff and a center spotlight high-beam for long range visibility.
The low-beam consumes 20W and remains powered when the 15W high-beam is fired. There is also a daytime running light feature which can be powered for additional glow. The LEDs are rated for 50,000 hours and operate at a 6000K color temperature.
No cutting, no drilling, no wiring modifications! Installation takes 5 minutes.
Two colors to choose from, Chrome or Black. Light output and beam pattern is the same for either color.
Non-DOT
Can't see past your shoulders? These mirror extenders will get your mirrors higher and farther out for a much better view of the road behind you.
- Aluminum extension with Japanese 10mm x 1.25 male and female threads
- Works with standard Ball Stud Base to offer clearance in some applications
- Torque spec: 5 Nm
- Sold in pairs
This new unit from JNS will protect your cases from the damage caused by a thrown chain, and will also keep your pants, boots or foot safe from your countershaft sprocket.
The case saver portion is laser cut from 0.25" aluminum and then has the 0.19" aluminum countershaft sprocket cover welded to it and the entire unit is powder coated black.
All the mounting hardware is stainless steel with machined aluminum spacers also included.
If you have a 16t front sprocket, mounting modification may be needed to fit. Install the case saver on the bike without the top spacer and bolt. This provides a little extra wiggle room. Add the top spacer and bolt after the bottom bolts are loosely threaded.
This CNC cap will replace the stock gas cap on the stock tank. You do need some parts from the stock cap, so don't throw it away yet! It is not difficult and this kit includes the additional hardware required. Also included is a vent tube with a matching cap.
For use on STOCK TANK ONLY! This is NOT a locking cap.
Does not fit California model DR650
PSR dual sport mirrors come with a slightly convex mirror for a wider field of vision behind you. The round mirror is 4.25" in diameter while the oval is 3.75" x 3". These mirrors are easily adjustable and fold out of the way quickly with the 1" RAM mounts.
The RAM Ball Stud Base used for both mirrors will go into any standard 10x1.25 threaded mirror base.
Sold individually. If you need a set, please order 2.
All Yamaha's will need a mirror adapter if you have the stock perch.
The Shorai LFX Standard Recommendation is the best overall pick for most applications, and has been selected to give strong cranking performance and long lifespan.
- Capable of holding a charge for up to one year without maintenance
- Two to four times the life of lead-acid batteries
- Carbon Fiber Composite case
- Stronger cranking for better starts
- Environmentally friendly, just discharge and dispose
- Ultra light and compact
Measures 4.5" x 3.5" x 2.28"
Weight (lbs): 1.34 lbs
Weight (kg): 0.61 kg
Cold Cranking Amps: 135
Polarity: [- +]
Each Shorai battery includes self-adhesive foam panels to achieve a snug fit in your battery box.
This is the ultimate in radiator guards! It will protect your fragile radiator from nasty front & side impacts.
This ultra tough guard is constructed from 1/8" aluminum and is easy to install.
All Flatland Racing radiator guards have rear mounting brackets for that extra support! All Mounting hardware is included.
Their best selling product to protect your bike, Flatland Racing skid plates are made from 5052 3/16" aluminum plate.
They are all hand tig welded together with side engine guards. Installation is easy with our clamps that grip tight.
Their skid plates offer clean out slots and oil plug hole, making oil changes simple. These are more durable than carbon fiber and plastic.
Mounting hardware and instructions included.
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Width: | 9" (229mm) |
Height: | Same as OEM |