Front fender from ProCycle Plastics (formerly DSA) is shaped very much like the OEM DRZ400SM front fender. Big enough to be functional without wind-steering the bike like the stock fender does. Vacuum molded, these are a design improvement over stock. These are fully compatible in any combination with the original factory plastic.
Our offices will be closed July 4 and July 5 for Independence Day to allow our team members to spend time with their families. We will back on Monday, July 8. Happy 4th!
Here is a complete kit to install oversized tapered 1-1/8" handlebars on your DR650. Warp9 handlebar clamps bolt to your stock triple clamp adding an additional 1" to the height.
Alloy oversize bars offer more durability and eliminate the crossbar which opens up your dash area for more goodies. Silver in color.
Designed to enhance the appearance of your motorcycle, yet provide greater riding distance per tankful. Larger capacity than stock, yet very slim and sleek. Perfect for the dunes or the race track! These tanks are made with POLYETHYLENE CROSSLINK for extra strength and durability.
- 2.5 gallon capacity
Does not fit Rally model
Emulators make damping rod forks perform like well-tuned cartridge forks. Emulators are tunable valves that sit inside your forks on top of the damping rods and are held in place by the fork springs. Simple to install and completely tunable for all conditions and rider preferences.
- Race Tech's original bolt-on fork valving system for front cartridge forks
- Triple the flow area of stock pistons
- Put valving control on the shim stack
- Outstanding tunability; improved control, traction, plushness and bottoming resistance
- Complete instructions, Gold Valve pistons, valving charts, valving shims and "Technical Edge
- Fork Maintenance and Gold Valve Installation" video all included
This is the secret for being able to put in those 500 mile days. Even a good touring seat can feel a bit firm after a couple hundred miles. Sheepskin gives that little bit of 'cush' and provides superior air circulation. Velcro straps allow easy removal when you don't need it. Measures 14" wide by 19" long.
Stabilizes gas for short and long term periods of inactivity (up to two years) while preventing the formation of varnish. Eliminates carbon buildup in fuel delivery system and exhaust components. Increases octane and removes water from the fuel, making it the perfect solution to prevent and eliminate ethanol (E-10) fuel problems. 8 oz bottle treats 48 gallons of fuel.
- Cures and prevents ethanol fuel problems
- Helps prevent phase separation
- Makes engines start easily, run smooth
Benchmark’s Folded Recreation Maps were created for outdoor lovers who want the high quality recreation information in our atlases but with the convenience of a traditional folding map. Complete public lands detail and hunting unit boundaries are shown as well as categorized recreation listings.
Moose Racing now makes a seat for us KLR riders. This is a complete seat already installed on a new seat pan. Take your old one off and put the new one on and get back to riding!
- Rugged micro-fiber suede top cover provides rider comfort and confidence
- Side gripper panes keep you aboard during aggressive maneuvering
- Smooth marine-grade vinyl with debossed Moose Racing logo
- Comes with strap kit that enables you to confidently secure cargo to the pillion section of your seat
- Race Tech's original bolt-on fork valving system for front cartridge forks
- Triple the flow area of stock pistons
- Put valving control on the shim stack
- Outstanding tunability, improved control, traction, plushness and bottoming resistance
- Complete instructions, Gold Valve pistons, valving charts, valving shims
This Slime Medium Tire Tackle Kit is perfect for your ADV tool kit. There are parts here to fix your flat regardless of which bike you are riding. On your tube equipped, no worries, patches are included. The 22-piece kit stores your tire care essentials in easy to browse compartments so you have everything you need to repair a flat tube/tire while on the go. This 22-piece set includes:
- Pencil gauge - 10-50 psi
- Screwdriver-style reamer and plugger tools
- 3 tire plugs
- 5 patches
- 4-way valve tool
- 4 replacement valve cores
- 4 standard black valve caps
- 4 upgraded aluminum valve caps
- Rubber cement
- Scuffer
Included in this kit are .43 kg/mm Race Tech straight rate fork springs, Cogent DDC (Drop in Damper Cartridge) performance cartridges and two bottles of 5w fork oil.
Due to the small diameter of the KLX140 fork springs, the DDC Installation Tool will not work in the normal way on these bikes.
For DL650 2012 - 2016. This new shape offers better comfort and support and also addresses the slope into the tank issue that the stock seat has. The passenger seating area is built up at the front to help the sliding effect into the main rider.
Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan.
Photo may not represent exact cover option.
Width: | 14.5" (368mm) |
Height: | Same as OEM |
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
On this model, they built up the front of the seat, but dished out the rear slightly to level out the angle of the rider platform, and reduce the slope-into-tank feeling of the stock seat.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan.
Width: | 12.5" (318mm) |
Height: | Same as OEM |
We offer two different types of SuperMoto tubes. The first are Standard Tubes and are meant to be used with standard bias-ply type tires, but can be used with radial tires also.
But, if you are running radial tires, like SuperMoto, or have a retro bikes with spoked wheels and radial tires, you probably want to run the 'Radial Tubes'. Front tubes fits 120/70 and 120/60 tires. Rear tubes fits 150/60, 150/70 and 160/60 tires. These have a metal valve stem.
New wider seat to help keep comfortable on that long commute or dual sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike.
The new updated 2.0 version has a sleeker shape and a better fit in the tank area.
Complete Seats come assembled on an aftermarket pan and ready to ride.
Width: | 8" (203mm) |
Height: | Same as OEM |
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Developed for Baja racing, their comfort model maintains a similar contour to stock at the front of the seat and tapers out towards the mid-point to distribute rider weight over a greater area. The Comfort seat is wider than stock, but not so wide that it would hinder movement in aggressive race situations.
The comfort model strikes the perfect balance between an aggressive race profile and a wider more comfortable seat.
Width: | 7 5/8" (194mm) |
Height: | Same as OEM |
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
On this model, we dished out the rear slightly to level out the angle of the rider platform, and reduce the slope-into-tank feeling of the stock seat.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or adventure ride!
This is for ONLY the Foam & Cover and it DOES NOT include the seat pan(s).
Width: | 11 3/4" (298mm) |
Height: | Same as OEM, 1" (25mm) Lower on Adventure Sport model |
- Lighter and stiffer than stock, high quality shock spring.
- A proper rear spring will give a smoother more controlled ride.
- Available in a multitude of spring rates, one is the perfect fit for your bike and riding style.
- Stock spring is rated at 5.3 kg/mm for the CRF450L
- Precision-machined from 6061-T6 aluminum
- Simple positive installation with an Allen wrench
- Set of two plugs (unless noted) replaces the stock plugs
- Polished to a mirror finish prior to anodizing, resulting in a brilliant look
- Anodized finish
- Made in the U.S.A.
It is a good practice to replace your sealing washer with every oil change. These 10 piece kits are made up of 5 Copper washers and 5 Aluminum washers. The manufacturer recently decided to make half of the kit Copper washers as that is the material of choice for many OEM manufactures. This gives you the opportunity to decide which you prefer, but either will work great at creating a leak-free seal between the case and the drain plug.
- Select applications available in SX version that is designed for more low to mid-range power and an MX version that is focused in the mid-to-upper rpm range
- Act as "pre-muffler" helping to lower the decibel output
- Available in stainless steel for strength combined with light weight, or in titanium for even greater weight savings
- Utilize FMF's patented module precisely located at the initial stage of the header for specific applications
- Horsepower is increased as much as 10%
- The expansion and contraction of exhaust sonics through the system causes increased flow
- Position "Bomb" increases performance
Desire that aggressive look of a Grandprix Growler Exhaust System? Needing a little more mean to your lean bike? If so, you’ve come to the right place! HotBodies Racing has a great solution and a price that’s kind to your wallet. Our NEW MGP Growler inspired exhausts will scare the competition with its deep growl of power and performance while showing off HotBodies’ famous aerodynamic styling. This compact MGP Growler exhaust bolts on your ride with zero modifications, giving you the look of a polished Grandprix model. Complimented by Hotbodies’ sleek Undertail this MGP exhaust will give your bike a ‘direct from the race track’ look.
- Features lightweight stainless steel and aluminum construction
- Designed to increase horsepower and torque
- Bolts directly to the stock headpipe
- Uses a U.S.F.S. certified spark arrestor.
- DG offers 4 different Quiet Core Inserts to reduce exhaust sound.
- Lightweight at approximately 5.5 lb.
- A quick, simple, no mess solution to oil changes
- CNC'd 6061 T-6 aluminum adaptor body
- Knurled grip and Buna O-ring for tool free sealing
- High-temp Silicone hose
- Ergonomic start/stop clamp
- End caps protect threads and provide clean storage
- Engineered, manufactured and assembled in the USA
Choose mechanical or hydraulic brake switches for your dual-sport conversion
10x1.25 thread. Low profile pressure switch for those applications with limited space above the brake banjo bolt. Kit includes a special replacement banjo bolt. Choose 10x1.25 thread pitch for most Japanese models. Choose 10x1.00 thread pitch for European bikes with Brembo brakes or Japanese bikes with Tokiko brakes.
Designed for use with stock engines using either stock or aftermarket exhaust and air filters.
- Provides a simple and affordable solution to carburetor tuning problems
- Allows you to tune your bike for increased power and smoothness while retaining fuel economy
- Includes a guide booklet on how to install and use your jet kit to its full potential
Sold in 6 packs
- Compatible with many air filter boxes. Easy to install by drilling 1’’ holes in airbox housing and snap fitting vents in.
- May be cleaned and re-oiled
- More air flow allows you to add more fuel to your intake mixture, increasing performance.
- 1" Diameter
Not legal for use on pollution controlled vehicles in the state of California.
- High performance racing camshaft
- No core required
- Designed to use stock valve springs and rockers in most applications
- Improved Throttle Response (ITR) technology
Stage 1. Excellent mid-range and top-end power increase. Uses stock valve springs and rockers
Fitment Specs: Exhaust Lift: 7.45; Exhaust Duration at 1.00mm: 265°; Intake Lift: 8.0; Intake Duration at 1.00mm: 238°
The Complete Top End Performance Kit includes:
10.5:1 compression JE piston with rings, wrist pin and circlips (the actual measured stock compression is only 8.7:1).
Stage 2 Web Cams high performance camshaft for more power (reground from brand new OEM Suzuki camshafts).
Top end gasket set with metal base gasket.
We strongly recommend checking valve to piston clearance when installing a non-standard camshaft.
Superior Filtration:
This should be the last oil filter you will ever buy. Made from laser cut, medical grade, 304 stainless steel micronic filter cloth, this filter provides 200% more filter area in many cases. Most good paper filters will pass particles in the 90 to 95 micron range, and some tested, as much as 300 microns. Sand is about 125 microns and a white blood cell approximately 25 microns. Scott's stainless filter catches items down to 35 microns "absolute", which is about 3 times better than most good paper or brass filters. The pleat seam is welded, able to withstand up to 600 degrees in our filter, not glued, like paper filters.
The New Power Commander V is loaded with tons of new features.
- USB powered from computer (9 volt adapter is no longer needed for programming)
- Gear input (allows for map adjustment based on gear and speed)
- Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature)
- With gear position input connected the PCV is capable of allowing each cylinder to be mapped individually and for each gear (for example: on a 4 cylinder bike with a six speed transmission there could be up to 24 separate fuel tables).
- 10 throttle position columns (up from 9 on PCIIIusb)
- Enhanced "accel pump" utility (increased adjustment and sensitivity ranges)
Quality air cutoff valve replacement kit contains parts necessary for a complete rebuild.
- Direct OEM-style replacement carburetor air cut-off valve set
- Includes diaphragm, spring and O-ring
- Located on the side of the carburetor, the air cut-off valve prevents lean fuel mixture (backfire) when decelerating
- Temporarily closes the pilot jet airway to provide a richer mix as the throttle closes
- The Q4 employs intricate chambers, baffles and proprietary multistage packing material making it the best performing quiet muffler available
- Constructed from aircraft grade aluminum and high strength stainless steel
- Sound output 96dB
- 8 pounds lighter than the stock muffler
The PowerBomb header promotes better flow by allowing a small expansion of the exhaust gasses. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels. Includes clamp-on mounts for the stock heat shield.
For FMF mufflers only
Built with the latest in Lithium Ion Polymer Technology. All components are designed, manufactured, assembled and packed in one location assuring high quality and consistency. Besides extreme lightweight (50% to 70% lighter than standard lead-acid batteries) it also features a built-in LED test gauge and the ability to mount it in any position.
The Firepower features increased cranking amps over lead acid batteries and has a very fast recharge cycle, and can be brought up to a 90% charge within 6 minutes. It also has 6 to 12 times more cycle life when compared to lead acid batteries. A 2-year warranty insures that your investment is protected.
220 CCA 12V/48WH
Package Dimensions: 6.20 x 3.70 x 5.25
The WR Speedo is driven by the motor and is inaccurate up to 10% in the stock configuration. Change your gearing and it gets worse. This speedo calibration device is the smallest in the world and has the widest calibration range available. It has a simple plug and play installation that you do have to program, but easily done just using your current gearing. Change your gearing, easy to change your speedometer.
Other beneficial features include:
- Saves max speed, which can be recalled to your stock speedometer gauge
- Built in testing mode to ensure proper installation
- Works for vehicles which display MPH or KPH
- Ability to convert MPH to KPH, or KPH to MPH
- Ratio based correction in 0.1% steps, up to 99.9% + or -
- Weather proof design to protect against the elements
- 18" wiring harness (1.5 ft.)
- 3 year product replacement warranty
- Made in the USA!
The Powercore 4 spark arrestor muffler. FMF developed the Powercore 4 to increase the horsepower and torque throughout the entire power curve. Highest quality packing for long life. Removable spark arrestor included. Louder than the Q4. Approximately 99db stock or about 94db with optional Quiet Insert installed.
- Uses long-life muffler packing for increased packing life
- Forest Service approved spark arrester
Clymer repair manuals provides step-by-step procedures based upon the complete disassembly of the motorcycle. This hands-on experience combined with extensive research results in a manual that is both user-friendly and detailed. Hundreds of original photos and illustrations guide the reader through every job.
The Complete Top End Performance Kit includes:
- 102.4mm Wiseco piston 9:1 compression (up from 8.3:1) with rings, wrist pin and circlips
- Stage 1 camshaft for more power
- Top end gasket set
This kit boosts your displacement from 644cc to 675cc. Your cylinder must be bored to fit the larger piston.
Complete set of friction plates, HD springs and steel separator plates prevent premature driven plate wear, oil muddying and loss of stack height.
Built with swaged aluminum carriers that spread the load on the clutch basket and prevent clutch basket "dogging".
Anti-swell, alloy impregnated heavy-duty, cork-based facings for smooth clutch take-up, and allows engagement modulation, unlike paper clutches which tend to snatch.
The EVO R series draws on our rich heritage of making power. Offered for various off road MX and sport ATV models, the EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.
- Hard anodized oval shaped aluminum muffler
- TIG welded reinforced muffler bracket(s)
- 304 stainless steel mid pipe
- Red powder coated stainless steel end tip
- Lighter than stock exhaust system
- Huge horsepower and torque gains
- Sleek muffler design allows for maximum clearance
- Removable screen-type spark arrestor included
- Handmade in the USA
- 1 Year Limited Manufacturer’s Warranty
- Hot Rods complete stroker crank assembly includes +4mm stroke for maximum power and performance output.
- Hot Rods constructs their complete stroker crank assembly to meet or exceed OEM specifications for maximum durability.
- Hot Rods stroker cranks are completely rebuildable and have been trued to within 0.001" from the factory.
- The Hot Rods stroker crank increases the stock displacement to 424cc when used with the stock bore piston or 462cc when used with a 94mm big bore kit.
- Main bearings sold separately.
This will not fit the DRZ400 kick start models. Nothing is available for the kick start models.
The Akrapovic double-flow muffler is made of a Titanium outer shell with a Stainless Steel end cap. The joint on the inlet cap is CNC milled and connected to the inlet pipe with silicon-shielded tempered springs. A lightweight, compact and high-temperature-resistant carbon fiber clamp supports the muffler to the frame.
This muffler is 3 pounds lighter than stock and will give you an increase in power across the powerband.
The plug-and-play exhaust is simple to install without any need for remapping and comes with full instructions.
This Kit replaces vital components in the BST40 Carburetor including new a Float, Needle Valve, Gaskets, Seals, Diaphragm, Spring and Float Bowl Screws to return the stock Mikuni BST40 Carburetor to like-new operation. As a bonus we have included Viton o-rings for the float assembly and 4 stainless steel allen screws.
The FMF Powerbomb and Q4 Muffler are legendary in the exhaust market.
The Powerbomb header promotes better flow by allowing a small expansion of the exhaust gasses improving scavenging. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels.
The Q4 muffler employs intricate chambers, baffles and proprietary multistage packing material making it the best performing quiet muffler available with a sound output of 96dB; with most models below 93 dB. It is constructed from aircraft grade aluminum and high strength stainless steel.
- Increased air flow over the stock air filter.
- Designed to increase horsepower and throttle response.
- Easily fits inside the factory air box.
- Larger surface area over foam filters which offers longer service intervals in dusty conditions.
- Four layers of premium cotton gauze provides outstanding filtration.
- Washable & re-usable, never wears out.
- One filter will last the lifetime of your bike.
Hard anodized oval shaped aluminum muffler with a TIG welded reinforced muffler bracket and red powder coated stainless steel end tip. Sleek muffler design gives you lots of clearance and it has a removable screen-type USFS approved spark arrestor. Head and mid-pipe are constructed from 304 stainless steel. Entire unit is pounds lighter than stock and gives great horsepower and torque gains throughout the RPM range.
All handmade in the USA with a 1 Year Limited Manufacturers Warranty.
Raises compression from stock 9.5:1 to 10.5:1 for more power and snappier response. Highest quality Wiseco pistons are forged in the USA. Fits the standard size stock bore.
As with any engine or exhaust modification, you will need to re-tune your fuel delivery system for optimum performance.
You can charge your Shorai battery with a regular battery charger but, if you want the very best for it this charger is designed for optimum performance by balancing the individual cells in the battery. Balanced charging ensures the battery reaches its fullest capacity and longest life. 'Store' mode allows long term maintenance storage.
Shorai Charge/Store Dedicated Battery Management System for Shorai LFX only. 2A Max charge rate, connects via BMS 5-pin port on LFX batteries. Includes modes for full charge, or long-term storage. Input USA 110~120V 50/60 Hz.
For Shorai Lithium Iron batteries only
New aluminum cylinder with plated aluminum liner. High performance camshaft with lightweight piston. This is the largest bore kit available for the KLX110 that does not require boring your engine cases.
- Aluminum cylinder with plated aluminum sleeve
- BBR high-performance camshaft
- 60mm lightweight aluminum piston
- Includes gaskets
Modern technology for the DR650s charging system. Mosfet style regulators produce less heat, are more efficient and last longer than old tech 'shunt style' regulators. Regulator is made by Rick's Motorsports, and includes a ProCycle adaptor bracket to fit into the existing space on the bike.
This regulator / rectifier is Lithium compatible.
Designed for use with stock engines using either stock or aftermarket exhaust and air filters.
- Provides a simple and affordable solution to carburetor tuning problems
- Allows you to tune your bike for increased power and smoothness while retaining fuel economy
- Includes a guide booklet on how to install and use your jet kit to it's full potential
Twin Air Filter's patented design, high quality materials and superior construction deliver unbeatable performance and protection - and make Twin Air Filters the hands-down choice of more World and National Champions than all other filters combined.
An air filter is your engine's only protection against the elements, and your stock filter isn't up to the task. Replace it with a Twin Air- the number 1 filter system proven on motocross tracks around the world.
Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles-without restricting airflow
A portable device that can jump-start your motorcycle or car. It can also charge your cell phone, GPS unit, laptop or other electronic devices via USB cable.
- XP-1 is 6" x 2 7/8" x1" 14oz.
- XP-3 is 5" x 2 7/8" x 1" 12oz.
- Holds a charge for up to 1 year.