Featured Products

Back to Top
New! 021016

Evans Waterless Coolant


Evans Waterless Coolant can be used for all water cooled motorcycles to eliminate overheating. With a boiling point in excess of 375° F, it will not vaporize, thus eliminating overheating, boil-over and after-boil. Another benefit is additional power by eliminating pre-ignition and detonation caused by overheating improving combustion efficiency.

Fastway Adventure Foot Pegs


This is the ultimate adventure bike platform, it measures 2.25" wide, 4.75" long. A full inch and a half longer than stock pegs!

New! 051717

Moto Caddy Document Holder


Moto Caddy Document Holder

The perfect document holder where you can keep your registration and insurance papers tucked up and out of the way in a water-resistant container. Just zip-tie it to you bike wherever you like and off you go.

Power Commander V


The New Power Commander V is loaded with tons of new features! Take control of your ride with adjustable fuel delivery and timing curves.

Engine

Back to Top

Select items




Moose Racing Radiator Hose & clamp kit

KTM 950 & KTM990 Available in orange

Manufactured by Samco Sport UK - the world leader in silicone hose, with over 20 years experience.

  • Hand wrapped and 100% visually inspected in the UK
  • European grade high-temperature silicone guaranteed to 356°F
  • Improved insulation promotes radiator efficiency and improves engine cooling
  • Three layers of reinforcement fabric offer high burst pressures and provide better debris/crash resistance
  • Used by leading MX/Enduro and Off-road teams
Select Kit

$151.95

New! 051415

Water Pump Rebuild Kit

LC8 engines

CJ Designs "Super Shaft" water pump kits use the CJD designed, hardened and coated shafts and replace the soft, failure prone OEM shaft. Includes cover gasket.

• Short Shaft = LC8 ADV '03-'08, LC8 950 SE '07-'09, LC8 990 Super Duke '07-'0

• Long Shaft = LC8 '09-Up

If your 03-08 bike has been worked on by a previous owner, please make sure they have not upgraded to the newer LONG shaft housing before ordering Short shaft kits. It is best to inspect the Impeller and match KTM part number below. SHORT kit uses PN 60035055100 LONG kit uses PN 61235055000

$29.95

New! 020216

Evans Waterless Coolant


Evans Waterless Coolant (EWC) can be used for all water cooled motorcycles to eliminate overheating. With a boiling point in excess of 375° F, it will not vaporize, thus eliminating overheating, boil-over and after-boil. At the other end of the spectrum, EWC freezes below -40° F.

EWC also delivers more power by eliminating pre-ignition and detonation caused by overheating improving combustion efficiency. It also generates very low vapor pressures which reduces strain on cooling system components. EWC comes in 1/2 gal. containers.

Installation requires just a bit more than dumping the old fluid and adding the EWC. Please click on the 'Instructions' button below to see those directions.

Evans Waterless Coolant Installation Instructions

When converting an engine from a water-based coolant to Evans Waterless Coolant (EWC), great care should be given during the installation (conversion) process to insure that all of the old water-based coolant is removed before installing new EWC.

There are a number of methods to use depending on the machine layout and ones mechanical abilities. If you are not comfortable with removing your thermostat and working on the entire cooling system, it is acceptable to drain your system as best as possible, and follow the instructions below.

  • Begin with a cold engine.
  • All of the old antifreeze must be removed from the cooling system. Conventional antifreeze contains water and water contaminates. DO NOT flush with water. (If the system is badly corroded or contaminated with non-coolant products [i.e. rust, oil, dirt, etc.], you may flush with water and use a chemical cooling system cleaner. More care will be needed to ensure that all the water is then fully removed.)
  • Drain cooling system including expansion tank according to the owner's manual.
  • If possible, remove a low hose connection, typically at the coolant pump, and blow air in through the radiator or system-fill opening to push out all the old antifreeze. A high-volume air source is preferred over high pressure air. If compressed air is used to help remove the old coolant and water, be aware that it can damage cooling system components. The use of high volume, low pressure air is preferred because it is safer, and in most cases, more effective.
  • Close up drains, attach any hoses that were removed, and fill system fully with EWC. Run engine until thermostat opens and fluid is circulated thoroughly. Allow engine to cool to relieve any possible water vapor pressure.
  • Drain system and blow out as well as you can again.
  • Close up drains, attach hoses, and fill system with EWC. Fill expansion tank to cold line. Check fluid level after initial operation.

Dispose of drained fluid responsibly. Treat EWC the same as antifreeze for disposal purposes.

EWC expands 7% at operating temperature, about the same as antifreeze. If there is no expansion tank on the system, the radiator will purge a small amount upon warm up. Once cooled, this is now the system's operating level.

EWC is a blend of glycols and so it is compatible with the chemicals in antifreeze so that if you must add water to your system in the case of an emergency, the mixture will perform the same as antifreeze and no worse.


$241.95

Barnett Dirt Digger Clutch Kit

(Made in USA) KTM 950 & KTM 990

Barnett high performance clutch kit includes drive plates, carbon fiber friction plates, and heavy duty springs.


$69.95

HotCams 10mm Valve Shim Kit

KTM 950 & KTM 990

10mm diameter - Includes three valve shims of each size from 1.85 to 3.20 in .05 mm increments. 84 shims in total, 83 cents per shim!

Select Color


$34.95

CJ Designs SAS Block Off Plates

KTM 950 & KTM 990

Removing the Supplemental Air Supply system will reduce clutter making maintenance much easier while reducing weight.

Add that extra bling with billet aluminum block off plates in anodized black or orange. These plates have the LC8 engine engraving on them adding to their great look!




• Click here for information on SAS removal


$85.95

CJ Designs KTM LC8 Adventure Oil Drain Hose Kit

KTM 950 & KTM 990

The LC8 ADV Oil Tank Hose Kit replaces the front Tank Drain bolt with a Braided line ad plug that allows you to speed up the service and make it a lot less messy. CJ Designs hose kits utilize braided stainless steel line with a plastic cover so that it wont damage or wear any nearby components.

Fitting sizes conform with OEM specs so you can use your OEM tool kit, and the drain plug is drilled for safety wire.


$89.95

Scott's Stainless Steel Reusable Oil Filter

KTM 950 & KTM 990

Superior Filtration:

This should be the last oil filter you will ever buy. Made from laser cut, medical grade, 304 stainless steel micronic filter cloth, this filter provides 200% more filter area in many cases. Most good paper filters will pass particles in the 90 to 95 micron range, and some tested, as much as 300 microns. Sand is about 125 microns and a white blood cell approximately 25 microns. Scott's stainless filter catches items down to 35 microns "absolute", which is about 3 times better than most good paper or brass filters. The pleat seam is welded, able to withstand up to 600 degrees in our filter, not glued, like paper filters.

Cleanable and reusable:

Simply remove the filter, rinse in clean solvent and replace it, you're done. The filter can be cleaned with solvent, kerosene, aerosol carburetor cleaner, or any other degreasing agent, even common dish soap. You can blow air through the filter from the inside out to remove any small particles or cleaning agent from the screen.


$56.95

Hi-Flo Oil Filter Value 10-Pack

KTM 950 & KTM 990

Providing unbeatable performance and exceptional value, Hiflofiltro is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.

$10.95

New! 121714

Oil Filter Removal Tool


For easy removal of recessed KTM non-reusable oil filters. Conical point screw pierces and grabs the sheet metal end cap on the filter.


$11.95

Oil Filter Magnet

KTM 950 & KTM 990

Easy to install. Attaches to base of standard oil filter. This powerful six point magnet traps abrasive hard metal particles down to 1 micron. Standard oil filters only trap particles down to 90 microns, leaving behind the most harmful particles to circulate through your engine. Reduce wear, and significantly increase your engine life.

Fuel & Intake

Back to Top

Introductory Price
$159.95

051914

ProCycle ITG filter kit

KTM 990 Adventure
New from ProCycle - a more economical alternative to eliminating the 990 Adventure airbox. Better breathing equals more power. The ITG filter kit makes air filter service a snap. It also simplifies other engine and intake maintenance chores. Our kit features a steel base plate which will not deform like plastic and does not conduct heat as much as aluminum. The white powder coating also helps reflect engine heat. To take advantage of the increased airflow we recommend upgrading your fuel injection map with TuneEcu or a Power Commander.

$399.95

Power Commander III

KTM 990 07-08

The Dynojet Power Commander plugs inline with your bike's stock fuel injection system. It uses OEM style connectors making installation easy and quick.

The Power Commander III USB allows a full range of fuel adjustment, as much as +/- 100% over stock. Adjustments can be made either with a Windows based computer or by using the face plate mounted button adjusters.

No permanent changes are made to the bike's system. Once the unit is removed the bike reverts to its stock settings.

Select bike year




Accessories




$299.95

LCD Display for Power Commander

KTM 990


The LCD Display connects to the Power Commander via a "quick disconnect" cable. It is designed to remain on the bike and is weather resistant. While connected, the unit will display all available data from the Power Commander. Some of the many features are:

  • Displays all Power Commander data "real-time"
  • Allows storage & switching between multiple maps on the fly
  • "On Screen" map adjustments
  • Adjust fuel trims – Low – Mid – High
  • Convenient touch screen
  • Quick Shifter configuration
  • USB programmable, and upgradeable
  • Comes with Display File Manager software

$49.95

Power Map Switch for Power Commander V


The map selection switch allows the rider to switch between two different maps "on the fly" within the Power Commander V

Select model




OEM Air Filter


Genuine KTM replacement air filter. Replace your air filter at recommended service intervals.


359.95

Power Commander V

KTM 990 09-up

The New Power Commander V is loaded with tons of new features.

  • USB powered from computer (9 volt adapter is no longer needed for programming)
  • Gear input (allows for map adjustment based on gear and speed)
  • Analog input (allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature)
  • With gear position input connected the PCV is capable of allowing each cylinder to be mapped individually and for each gear (for example: on a 4 cylinder bike with a six speed transmission there could be up to 24 separate fuel tables).
  • 10 throttle position columns (up from 9 on PCIIIusb)
  • Enhanced "accel pump" utility (increased adjustment and sensitivity ranges)

$399.00

Dynojet Auto Tune Kit


Don't have a dyno tuning center nearby? Are you more of a do it yourself type? Are you constantly changing parts on your bike?

If you answer "yes" to any or all of the questions above, then our Auto Tune kit is for you. The Dynojet Auto Tune kit is an "add on" accessory that can be used with any of the Power Commander Vs

It connects to the PCV with a single cable and requires only a ground and +12 volt connection to be made to install. If your exhaust does not already have one, a "weld in" O2 sensor bung is included

Once installed, the Auto Tune kit monitors the fuel mixture (by installing the included Wide Band O2 sensor in the exhaust). It then sends this information to the Power Commander V and automatically corrects it while you ride. Each map that we offer has preset Air/Fuel ratio values included that we find to be the best overall settings. This lets you simply plug in the unit and let it do the work.


$67.95

CJ Designs TuneECU Cables

KTM 990

TuneECU Cables allow you to connect your home computer to your KTM's Engine Control Unit

After downloading the free TuneECU software you can then reprogram, diagnose and test your Engine Control Unit


$149.95

CJ Designs Fuel Pump Filter Rebuild Kit

KTM 990

The fuel filter on your KTM 990 Adventure needs to be serviced on a regular interval because it can get clogged with any dirt or debris.


$23.95

UNI Pre-Filter Air Cleaner

(Made in USA) KTM 950 & KTM 990

Unsurpassed in airflow, dirt stopping and overall performance. Adding a pre-filter to your intake system gives you extra protection from damaging contaminants.

Drivetrain

Back to Top

$28.95

Front Sprockets

KTM 950 & KTM 990

These quality sprockets are made from the finest 545C high carbon steel and are then heat treated and hand finished to meet or exceed OEM standards. Outlasts many mild steel or surface hardened sprockets as much as two and three times over.


$39.95

Rear Sprockets

KTM 950 & KTM 990

These quality sprockets are made from the finest 545C high carbon steel and are then heat treated and hand finished to meet or exceed OEM standards. Outlasts many mild steel or surface hardened sprockets as much as two and three times over.


•  Will not fit Super Moto models

$95.95

EK 525 O-Ring Chains

KTM 950 & KTM 990

The SRO series chains offer a value-priced O-ring chain that will not compromise on quality or durability. Features include lightening holes, high-tech heat-treated steel alloys and all the exact same quality and craftsmanship that EK puts into their entire product line.


• Sold in 120 link Lengths with a rivet type master link.

$13.95

The Grunge Brush


Innovative design that cleans chain from 3 angles at once. Long handle keeps fingers and hands away from chain and sprockets.

  • Will not harm O-ring chains
  • Easily adjustable for all chain sizes

$12.95

360° Chain Brush


This brush has 2.25 coils of 360° chemical-resistant nylon bristles to make it the fastest, most effective, precise and systematic method for giving your chain a thorough cleaning. It will help the performance of the chain, the sprockets and the engine. This brush will fit any 400 or 500 series chains.

Choose Package:


Scottoiler Auto Chain Oiling System

KTM 950 & KTM 990

This is a vacuum operated automatic chain oiling system to keep your driveline adequately lubricated at all times.

When properly adjusted the oil will last thousands of miles between refills. The Scottoiler kit includes one 250ml bottler of oil which is good for 10000 miles of riding.


$35.95

Cush Drive Rubber Dampers

KTM 950 & KTM 990

The KTM990 and 950 bikes are rather hard on the cush drive rubbers. Replace these any time you feel excessive play in the sprocket hub. Excessively worn dampers can cause the cush hub bearing to fail - which will ruin your sprocket carrier. Sold as a set of 6 rubber dampers.

$8.95

Motul Chain Paste


A new innovative product from Motul. This chain lube comes in a brush applicator squeeze-tube bottle. It makes applying chain lube easy and less messy than spray on lubes.

$8.95

Renthal Chain Lube


Renthal chain lube is 100% lubricant, zero propellant. So this new 250ml bottle size combines high performance and value.

The all-new formula Chain Lube is specially designed to penetrate all parts of the chain. This all-condition lube is compatible with all o-ring and non o-ring chains.

Suspension

Back to Top

$29.95

Fork and Dust Seal Kit

KTM 950 & KTM 990

Low friction 'triple lip' seal design. Oil seals last 3-4 times longer that OEM seals. Kit includes Fork Seals and dust wipers.


69.95

Pivot Works Swingarm Bearing Kit

KTM 950 & KTM 990

Restore handling and suspension control lost due to worn or rusted linkage components.

Each kit contains bearings, pins, collars and seals manufactured to OEM specifications for a perfect fit

This kit offers considerable savings over OEM prices


$29.95

Steering Stem Bearing Kit

KTM 950 & KTM 990

Tapered roller bearings provide decreased maintenance, less wear, smoother operation and longer life. This set of high quality replacement steering stem bearings include:

  • Upper and lower tapered bearings
  • Upper and lower bearing races
  • Upper and lower seals

Exhaust

Back to Top

Select System




Leo Vince LV One EVOII Exhaust

KTM 950 & KTM 990 Adventure

LeoVince renewed the SBK range with the line of LV One fully approved EVO II silencers.

Style, materials and operating life have been studied and developed by the LeoVince technicians, maintaining the concept of performance in compliance with the relevant laws as for the previous series, and extracting the technical solutions in order to realize a new line of products with a new style.

The geometrical development of the pipe work and silencer is specific for each engine model, aimed to enhance the torque and maximum power


$8.95

Exhaust Gasket

KTM 950 & KTM 990   Sold separately

This gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head. Get a fresh one now avoid having an exhaust leak when you install your new exhaust..


$31.95

Universal Stainless Repack Kit

(Made in USA)

Re-pack your silencer with this pro-quality, three layer packing system and restore the power you have blown out.

Kit includes:
  • 60"x20"x1⁄4" glass mat.
  • 7"x20" stainless wool
  • 8"x20" stainless mesh
  • Twelve 3⁄16" rivets

$799.95

FMF TIQ4 Exhaust

KTM 990 08-up

Using all the experience and R&D testing that went into the Q4, the next step was to create the ultimate off-road exhaust - the Titanium Q4. Sharing all of the advances found in the Q4, the Ti Q4 weighs less than most moto mufflers and measures below 93dB on nearly all models tested (no more than 96dB on any model). The best way to describe the Ti Q4 would be "less is more" - less weight, less noise, more places to ride.

  • Weigh 9.2 lbs each
  • Includes Stainless Steel mid pipes
  • Comes standard with spark arrestors
  • Sound output 93db - 96db

$14.95

Muffler Joint Gasket

KTM 950 & KTM 990   Sold separately

This gasket seals the joint between the head pipe and muffler. These gaskets are easily damaged when removing the original muffler.

Select items




Muffler Packing Pillows

(Made in USA)

The latest in muffler packing technology. Spec 31 high performance muffler packing resists breakdown up to 1400°F, is universal and easy to install. Pillow can be trimmed to length to fit mufflers up to 20" long. Comes with cap stuffer to fill packable end caps.

Lighting & Electrical

Back to Top
Choose Kit:


Trail Tech Equinox 60mm LED Light



Trail Tech's 60mm LEDs are perfect for any riding adventure, no matter the conditions. Throwing out over 1,000 lumens brightness at only 10 watts, it is one of the most efficient lights on the market.

Three power modes allow performance at any circumstance, from Hi mode for lighting up the night to Low mode for daytime driving light.

The anodized billet aluminum housing is durable and promotes better heat management. Aluminum reflector with vacuum metal deposition creates the most accurate spot beam.


$39.95 or $45.95

RAM Light Mounts


The perfect solution for mounting those LED auxiliary lights. The base of the RAM mount is held by your mirror. This puts the light where you can easily adjust the angle for different riding situations. The Equinox mount fits Trail Tech Equinox lights or any other light with a 10mm or 3/8" mounting stud. The Solstice mount fits VisionX Solstice lights or any other light with a 6mm or 1/4" hole in the mounting bracket.

Sold individually.

  

$119.95

VisionX Solstice 10 Watt LED Light


Each 10 watt Solstice Solo produces 900 lumens. Roughly equal to a 50 watt halogen bulb. These are the brightest LED off road lamps on the market. The rugged and compact 2" x 2" square die-cast aluminum housing makes mounting easy. The Solstice Solo also features a 4 sided channel design that allows you to interlink it on all four sides with another Solstice Solo pod. Includes stainless steel mounting bracket and waterproof connection. The Elliptical pattern is wide and flat. Sold each.

Choose Package:

New! 082715

Koso Mini 3 Temp/Clock/Volt Gauge


click to enlarge
click to enlarge

This Mini 3 meter was designed to help you monitor basic information before and during a ride. Check the condition of the battery before leaving and the voltage of your system during the ride. The ambient temperature function will give you a good reference about how to dress prior to and what is happening during your trip. It can be very handy to know if the temperature is near or below freezing. The large clock makes it easy to know if you are on schedule or not.

Dimensions: 2.4" W x 1.2" H x .5" D.

Available for the Mini 3 is a nicely crafted mounting plate that allows you to place your new gauge wherever you like.

$37.95

New! 032116

Brake Light Modulator

(Made in USA)

This compact, solid state electronic module converts your ordinary brake light into an attention getting, visual alerting device.

Module causes three short flashes and then stays solid for 3.5 sec, then repeats the cycle for as long the brake is on.

! Not for integrated brake/turn units. Resistor Kit may be required if using an LED bulb.


12V LED Flashlight/Charging System Indicator


This great little 6-LED flashlight goes right into your Battery Tender type plug for hours of light. In addition, it has a charging system check that lets you know if your bike is charging properly. All with a 40 inch cord so you can see in those out of the way places when you need to.

Don't have a cable from your battery? Well, select the package and we will include a cable that goes from your battery to a SAE type connector to plug in your light or charge your battery when at home. This is a fused circuit to protect your battery.


$49.95

Digital Voltmeter and Bracket


A digital voltmeter that can be mounted almost anywhere thanks to our multi-position stainless steel bracket. This will tell you how your charging system is doing and whether or not you need to turn off the laptop and in-flight movie system for awhile. Completely waterproof and comes with connectors, wires and thorough instructions. We consider this a 'must have' device for riders who use heated riding gear, heated grips, additional lighting, etc.

$14.95

ThumbDogs


click to enlarge

These simple add-ons stretch and grip to the finger of your favorite glove using Grrprr technology. Users can operate a phone or any touch screen device and never have to remove their nice warm gloves.

A special conductive material enables you to interact with capacitive touch screens quickly and easily. There are two ThumbDogs to each package so you can double digit type just like you would in the real world. You can also put one on your index finger to operate your GPS.


$189.95

Shorai Lithium-Iron Battery

KTM 950 & KTM 990

Shorai batteries deliver more energy faster, with less weight and with less wear on the battery per start cycle than any other brand or technology available on the market today.

  • Up to 80 percent lighter than their lead acid equivalents
  • Improved starting performance
  • Does not sulfate while sitting
  • Three year warranty
LFX19A4-BS12
  • Weight 2.31 lbs
  • Amp hours 19
  • CC Amps 285
  • Dimensions: l= 5.83" w= 3.39" h= 3.46"

Self-adhesive foam shims are included and insure a great fit to the battery box, as well as extra vibrational an thermal insulation.

Shorai Batteries require a charging system output of 13.1 Volts or higher at idle, and must not exceed 15.2 volts at maximum output. "Smart" lead-acid chargers with automatic cutoff may be used for periodic charging, but will NOT work as a tender/maintainer and should be disconnected immediately after charge has finished. Older lead chargers without automatic shut-off should never be used. Improper charging is dangerous and will void your warranty. A Shorai BMS Charger - with Store Mode - is highly recommended for anyone who rides less than twice a month. Alternatively, you may disconnect the negative cable from the battery for storage, and charge once per year in that case.


$229.95

Ballistic Evo2 Lithium Battery

(Made in USA) KTM 950 & KTM 990

The 12 Cell EVO2 is the work horse of the Ballistic battery line up. This battery was designed around the upper end of the powersports universe. The typical battery in this range weighs 14.1lbs while the Ballistic 12 Cell weighs 2.5lbs.

  • Completely "dry" technology
  • Impact and water resistant
  • Industry leading 3 year warranty
Choose Optimate:



Optimate Battery Maintainers/Chargers


Optimate Battery Maintainers/Chargers

Optimate 1 Global Charger-Maintainer

This charger is perfect for 24 hour, 7 days a week, 365 days a year smart battery maintenance. It delivers precise microprocessor controlled charging and long term maintenance. Maintain any type of 12 volt lead-acid filler cap / wet cell, sealed AGM (MF) or GEL battery without overcharging. Ideal for vehicles that are seldom or seasonally used, or in storage. Global Three-step charging program ensures effective charging of the battery and is totally safe for prolonged connection to the battery, without risk of overcharging. Automatic shut-down if short-circuited or battery disconnected. Dust proof case with wall mounts, with 6ft AC supply lead and 6 ft. charge lead ending in SAE connector. Velcro strap slot to hang the charger on handlebar. Weatherproof battery lead & OptiMate battery clip set included.

********************************

Optimate Battery Maintainers/Chargers

Optimate 2 Maintainer

OptiMate 2 senses the battery condition, recharges and then keeps the battery 100% ready. The OptiMate maintenance program delivers only what the battery needs, never overcharges, never undercharges. Provides power to the on board computer, display or antitheft alarm. Totally safe for vehicle electronics. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected. Works with standard filler caps, and sealed maintenance-free units. Includes permanent ringlet connector with weatherproof cap and battery clips. Comes with global input (100-240V).

********************************

Optimate Battery Maintainers/Chargers

Optimate 3 Optimizer

Recovers sulphated batteries and then tests after charging. The maintenance program delivers only what the battery needs, never overcharges, never undercharges. Provides power to the on board computer, display or antitheft alarm. Diagnoses, recovers, charges, tests and optimally maintains, automatically. Comes with global input (100-240V). For batteries forgotten over the winter, OptiMate 3 will recover them from deep discharge and optimally recharge them. Batteries status can be checked at a glance. OptiMate 3 will then maintain the battery at full charge safely for months at a time and increase life by up to 400%. Works with standard AGM, and gel batteries. Do not use with Lithium batteries.

********************************

Optimate Battery Maintainers/Chargers

Optimate Lithium

OptiMate™ lithium, the first OptiMate to protect your LiFePO4 battery unlike any other charger. Will protect your investment and keep your Lithium Iron Phosphate (LiFePO4/LFP) battery performing as advertised for a very long time. With 5 Amps of charge current available, OptiMate lithium's unique multi-step ampmatic™ program recharges and balances cells within the battery quickly and efficiently. Optimate lithium's maintenance program delivers current to the vehicle circuitry, protecting and keeping the battery at 100% charge. Tests and displays battery condition before charging. Voltage retention test is conducted for 30 minutes during which no charge current is delivered, and provides results indicating the battery's general state of health. The 12-hour MAINTENANCE CHARGE CYCLE consists of 30-minute float charge periods at a voltage of 13.6V followed by and alternating with a 30-minute "rest" (no charge current) periods. Includes permanent ringlet connector with weatherproof cap and a set of battery clips.


$76.95

Shorai Charger


You can charge your Shorai battery with a regular battery charger but if you want the very best for it, this charger is designed for optimum performance by balancing the individual cells in the battery. Balanced charging ensures the battery reaches its fullest capacity and longest life. 'Store' mode allows long term long term maintenance storage.

Shorai Charge/Store Dedicated Battery Management System for Shorai LFX only. 2A Max charge rate, connects via BMS 5-pin port on LFX batteries. Includes modes for full charge, or long-term storage. Input USA 110~120V 50/60 Hz.

For Shorai Lithium Iron batteries only


$36.95

Battery Tender Jr. 12V Charger


  • Fully automatic two-stage lead-acid battery charger
  • Lightweight, compact size is ideal for those hard-to-reach spots
  • Trickle charger ensures batteries are maintained after charging and always ready to go
  • Ideal for all lead-acid, sealed maintenance-free and gel cell batteries (not recommended for lithium iron batteries such as the Shorai)
  • After full 14.4VDC charge is reached, converts to float charger and monitors battery at 13.2VDC; when voltage drops below 12.6VDC, charger resumes charging back to 14.4VDC
  • Two-color LED indicator (red light = charging; green light = storage)
  • Spark-proof
  • Reverse-polarity protected
  • 12' output cord and quick-connect harness

$79.95

072417

Lil' Lightning Ultra Slim Jump Start Pack


Ultra Slim Jump Start Pack

This is small package that has a 12 Volt, 6000 mA-h grade A lithium cobalt oxide battery with 200 amp jump starting ability, enough power to start your motorcycle numerous times. Included in the kit are plug-in jumper cables, 5v USB, Micro USB, iPhone 4 and 5 adapters as well as 110v and 12v chargers all in a fire proof carrying case. The Ultra Slim also has a high-powered LED flashlight with SOS emergency flash mode. All of this in a package that weighs just 8 oz. and is 5 1/2" x 3" x 1/2".

Choose Package:


Micro-Start Portable Jump Start and Power Supply




A device that you can keep in your fanny-pack, backpack or even pocket that can jump-start your motorcycle or car. It can also charge your cell phone, GPS unit, laptop or other electronic devices.

  • XP-1 is 6" x 2 7/8" x1" 14oz.
  • XP-3 is 5" x 2 7/8" x 1" 12oz.
  • Holds a charge for up to a year.

Review by Dirt Wheels Magazine

Include Power Port:


Select Charging Cable:


New! 032516

Weatherproof USB Charging System


click to enlarge

This compact, easy to mount, all weather USB Power Port is the answer for powering and charging your USB devices including cell phones, smart phones, most GPS units, MP3 players and some digital cameras.

Power port connects from battery to handlebars using included universal mount.

Select the correct charging cable for your application by clicking on "More Information".

click to enlarge click to enlarge
  • 18" power port and charging cables
  • Input Voltage: 12V ± 4.0V
  • Output Voltage: 5V ±.25V
  • Output Current: 1A Max
  • 3BR Powersports Universal Mounting System
  • Powers Garmin GPS as well as most cell phones and any other device that charges using 1A or less of USB power

Red Band USB Smart phone Quick-Charge Cables (Micro style connector)looks like standard USB data cables but have the built-in ability to signal Smart phones such as Android or Windows to charge at full rate when plugged into any "dumb" charger such as car chargers, wall adapters or 3BR Powersports TAPP series of all-weather USB power ports. Charging at full rate can reduce the charging time by as much as two hours and will easily keep up with power hungry applications such as GPS or video.

Red Band GPS Power cables (Mini style connector) enable Garmin Nuvi GPS to navigate when plugged into a generic USB power port. Garmin Nuvi uses the cable to determine which mode, navigate or data, the GPS should be operating in. Using a standard USB data cable to power a Garmin Nuvi will cause it to go into data mode for transferring maps, route/track data, pictures etc. The Garmin factory power cable is used to enable navigation mode. However, the Garmin power cable is unsatisfactory for powersports applications as it is not weatherproof, is way too long and is only supplied with a cigarette lighter-type of plug. The 3BR Powersports Red Band GPS power cable looks like a standard USB power cable with a USB Type A plug on the source end but it has internal circuitry to make it appear to the GPS as a Garmin power cable. The USB Type A plug allows powering the GPS from any generic USB port and allows use of 3BR Powersports power port cables for full all-weather protection.

$109.95

New! 051116

signalMinder


click to enlarge

The signalMinder unit is designed as a plug-in replacement for many Japanese bikes. This unit will automatically cancel your turn signal if you forget to shut it off.

  • Cancels signal at 10, 20 or 30 second intervals
  • Allows you to use turn signals as running lights
  • 4-way hazard option
  • Brake flash option

SM-3 unit is designed as a plug-in replacement for most Honda and some newer European bikes. signalMinder uses a computer chip to cancel the turn signals. There are three selectable time outs: 10, 20, 30 seconds.

RUNNING LIGHT OPTION: By attaching two quick-connect wires included, you can convert ALL FOUR turn signals to running lights and establish a dual-channel system on your bike.

Special Note! For 2009 and up Kawasaki models that have onboard computer diagnostics, or if you have Alarm system that activates turn signals, please select SN-4D harness shown below.

Using the DIP Switch #1, you can keep them off and still have the dual-channel system. With the dual-channel system, when you activate the RIGHT turn signal three times in succession, you get 4-way hazard flash function.

BRAKE FLASH OPTION: will flash the turn signal lamps every time you apply brakes. A short 2 second flash pattern begins with quick flashes then slows down to stay on solid.

BRAKE OVERRIDE OPTION suspends the time-out feature until the brakes are released. This allows continued flashing for those times when you are waiting at the signals to make a turn and do not want the time-out to cancel the flashing.

Select Mount Type:


$49.95

New! 101215

RAM Cell Phone Mount


A complete kit to mount your phone (or other electronic device) to your motorcycle. The cradle expands from 2.25" to 3.25" wide and 4.75" to 6.25" tall. The width is adjustable but fixed while the upper portion of the cradle is spring loaded to keep your device secured in the roughest conditions.

Select the mount option that works best for you. The mirror mount is shown in the photo at left and is a flat plate with an 11mm hole on one side and a RAM ball on the other. Simply remove your mirror, place the plate between your mirror and the perch and tighten it down.

The handlebar mount kit allows you to mount to either a 7/8" or 1-1/8" bar. Also includes hardware to mount to the back of a lever perch. See image at bottom right for kit pieces.

click to enlarge click to enlarge click to enlarge

$34.95

New! 101515

Noise Isolating Earbuds


click to enlarge

These lightweight ear buds function just like any other set of ear buds, yet make a much better, and more comfortable seal, which helps put the music (or phone, GPS, intercom, etc) where it matters most. The unique earplug design ensures that wind and engine noise is blocked and more sound from your audio device is channeled straight to your ear. They give you a 25dB sound reduction. Save your hearing and hear your tunes.

The low profile allows them to easily fit under your helmet, giving you ear plugs as well as speakers. Total length of wire is 44", enough to reach just about anywhere you need.

If you would like just standard high-quality NoNoise Ear Plugs, click here.

Body & Frame

Back to Top

Select Options:









Optional Add on:

$184.95

Seat Concepts Saddles

KTM 950 & 990 (Made in USA)


Seat Concepts offers three different versions of their super comfy cover and foam kit for the big KTM. Each will keep you more comfortable on those long rides, whether it be to work or headed down the highway. Also available is an option for you and a passenger - after all, their comfort is important too!

Three Shape Options!

  • Low saddle: Based on the stock seat but wider in the seating area, and with a more dense foam that is approximately 1/2" shorter than the stock flat seat.
  • Tall saddle: Same shape as Low seat described above, but 1.5" taller.
  • 2 Up: A new design meant to provide increased comfort for both pilot and passenger with it's unique shape.

This price is for the cover and foam only. Kit does not include the seat pan.

These seats are custom order and may take 5-10 days until they ship.

! Seat orders ship Parcel Post (6-10 business days) within the US.  Why?

Select items




$374.95

Moose Racing Adventure Seat

KTM 950 & KTM 990 (Made in USA)
  • Rugged microfiber suede top cover provides rider comfort and confidence
  • Side gripper panels keep you aboard during aggressive maneuvering
  • Smooth marine grade vinyl with debossed Moose Racing logo
  • Comes with strap kit that enables you to confidently secure cargo to the pillion section of your seat
  • Available in "Low profile"

$79.95

Moose Seat Warmer Kit


click to enlarge

9" by 9" carbon fiber seat warmer that goes between your cover and the foam to keep your backside happy on those really cold days. This improved design produces 25% more heat than most other warmers using just 30 watts.

Kit includes the warming unit, with connector, 24" extension cable, rocker-type on/off switch and stub to splice into your wiring along with complete detailed instructions.

$29.95

New! 092915

Sit & Fly Net Seat Cover

KTM 950 & 990

Want to stay cool and comfy on those long summer rides? The Sit & Fly net seat cover allows air between you and the seat keeping things significantly cooler. Allowing the air to circulate under you eliminates perspiration and keeps things dry and comfortable.

$69.95

Sheepskin Seat Cover

(Made in USA) 

This is the secret for being able to put in those 500 mile days. Even a good touring seat can feel a bit firm after a couple hundred miles. Sheepskin gives that little bit of 'cush' and provides superior air circulation. Velcro straps allow easy removal when you don't need it. Measures 14" wide by 19" long.

$99.95

AirHawk2 Seat Cushion



pic

So you're not ready to dish out $300 for a new seat but you can't stand to sit on the stocker for more than 50 miles. The AirHawk2 might be the answer.

  • Air filled AirHawk2 12"x18" cushion custom fits your shape and redistributes pressure that causes numbness and discomfort when you ride
  • Seat cushion cover is constructed of a breathable, stretchable Nylon/Lycra blend with a non skid Urethane base
  • Open mesh side panels allow heat to escape
  • Easily inflates by mouth with no pump needed
  • Mounting straps and Repair patch kit included

 

Choose Windscreen





Moose Racing Adv. Windscreen

KTM 950 & 990 (Made in USA)

Quality windscreen made from Lucite aircraft acrylic making it more rigid and optically clearer than OEM windscreens

These models are 2.5" or 5" shorter than stock which reduces buffeting.



  

$169.95

Warp 9 Carbon Fiber Windscreen

KTM 950 & KTM 990 (Made in USA)

Hand made carbon fiber windscreens by Warp 9 are a great addition to your KTM. Made with the same precision and care that Warp 9 has become known for.


• This is a limited run so get one while they last!


$386.95

Moose Racing Engine Guards

KTM 950 & KTM 990 (Made in USA)

The KTM950/990 Adventure Engine Guards are made from 1" drawn-over-mandrel tube and includes a "crumple zone", which allows bar movement on impact. Also includes an energy absorbing spacer which helps prevent frame damage on impact

  • Provides the highest level of protection
  • All Engine Guards are powder coated black

Options


$161.95

Side Stand Relocation Kit

KTM 950 & 990

CJ Designs has developed this kit to resolve a much overlooked problem. This bracket relocates the kickstand on your KTM Adventure or Super Enduro from the engine to the frame. Now you can ride any terrain without the worry of cracking your engine case ever again!

Available as an option is a plug-n-play extension cable for those that do not want to bypass or jumper out the kickstand safety switch.

Wheels

Back to Top

Rim Choices:




Hub Choices:






Sprocket Carrier

$1399.00

ProCycle SuperMoto Wheels


We start with Excel Takasago, or top of the line Sun rims, OEM or Warp 9 hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are then precision machined for a perfect match to your bike.

Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.

  • New OEM or Warp 9 hubs with bearings and seals installed
  • Excel or Sun 3.5" x 17" front rim
  • Excel or Sun 4.25" x 17" rear rim
  • Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples
  • Optional matching Warp 9 sprocket carrier

Add any set of tires to your order and we will mount and balance for free! Tubes and rim strips included.

Wheels are custom made to order and cannot be canceled. Please allow 2-3 weeks for delivery.

Rim Sizes:






Rim Choices:





Hub Choices:





ProCycle Complete Front Wheel


We start with Excel Takasago, or top of the line Sun rims, OEM or Warp 9 hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike.

Our pro shop then laces and trues your wheel to perfection, giving you the highest quality custom wheel available.

Wheels are custom made to order and cannot be canceled. Please allow 2-3 weeks for delivery.

Rim Size:



Rim Choices:





Hub Choices






Sprocket Carrier


ProCycle Complete Rear Wheel



We start with Excel Takasago, or top of the line Sun rims, OEM or Warp 9 hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are then precision machined for a perfect match to your bike.

Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.

  • New OEM or Warp 9 hub with bearings and seals installed
  • Excel or Sun rear rim
  • Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples
  • Optional matching Warp 9 sprocket carrier

Wheels are custom made to order and cannot be canceled. Please allow 2-3 weeks for delivery.

Rim Choices:




Hub Choices:






Sprocket Carrier

$1399.00

ProCycle Adventure Wheels


One of our most popular wheel combinations is the "Adventure Wheel" set up. These are the same rim sizes as used by the BMW GS and other big adventure bikes. The 19" front and wide 17" rear will give you great road handling while still being dual sport friendly.

We start with Excel Takasago, or top of the line Sun rims, OEM or Warp 9 hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike.

Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.

  • New OEM or Warp 9 hubs with bearings and seals installed
  • Excel 2.5" or Sun 2.75" x 19" front rim
  • Excel or Sun 4.25" x 17" rear rim
  • Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples
  • Optional matching Warp 9 sprocket carrier

Add any set of tires to your order and we will mount and balance for free! Tubes and rim strips included.

Wheels are custom made to order and cannot be canceled. Please allow 2-3 weeks for delivery.

Hub Colors:







Sprocket Carrier:







Add Tires:






$1299.95

New! 102414

Warp 9 Off-Road Wheels

KTM 950 & KTM 990 (Made in USA)


New off-road wheels for your KTM 950 or 990 from Warp 9. Both are OEM sizing, 21" x 2.15" front and 18" x 4.25" rear. These rims are made from 7050 grade Aluminum, much stronger than the stock material and the front rim is 1mm thicker for additional strength.

Hubs are CNC machined and available in silver, black, orange or blue. Rims come in black and all oversize and nipples are stainless steel. The front wheel includes dual 300mm stainless steel floating rotors that are recessed to accept the stock ABS ring for the 990 (this ring not included).

The rear wheel has a 240mm rotor included and can accept a stock cush drive sprocket carrier. Better yet, how about a matching CNC unit for just $169.95 that accepts OEM cush rubbers (not included) and includes a black, 42 tooth steel sprocket bolted up! Yes, the center spacer is also included.

If you need individual wheels, please contact us for price quote.

 

$23.95

Front Wheel Bearing Kit

KTM 950 & KTM 990

Moose Racing front wheel bearing kit. Includes a new dust seal. All bearings are sealed on both sides.


$28.95

Rear Wheel Bearing Kit

KTM 950 & KTM 990

Moose Racing rear wheel bearing kit. Includes a new dust seal and the bearing and seal for the cush drive hub. All bearings are sealed on both sides.

.

Tires & Tubes

Back to Top

Select items






Continental TKC 80


The TCK80 has a self-cleaning tread pattern along with high levels of side stability on soft surfaces with very good road handling manners. It is also original equipment on BMW 1200 GS Adventure and KTM 690 Enduro R.

Select items





Kenda K784 'Big Block'


Made for the true adventurer the new K784 has everything you need to get you anywhere on or off road.

  • Tread pattern providing high traction on a variety of terrain
  • Large tread blocks for improved tread wear and high speed handling
  • High impact, Bias ply, casing structure providing a high level of puncture resistance
  • Bias belted casing for improved handling & stability
  • Rubber compound designed specifically for wet-slick & dry-hard packed terrain

$44.95

MotoPressor Pocket Pump


The MotoPressor is a compact pump unit that weighs only 1.5 pounds and fits in the palm of your hand. MotoPressor very cleverly omitted the plastic housing you find on other pumps. This makes it smaller and easier to carry with you. Included is a 25 inch long inflator hose, with a hands-free lock-down delivery valve. You also get a SAE power cord that attaches to your battery and stays there. The Pocket Pump has an 8.5 foot cord to give your air supply plenty of reach. All this packs into a heavy duty neoprene pouch.

MotoPressor will pump the front or rear tire of your motorcycle from flat to approximately 30 psi in 2 minutes and is capable of pumping to over 100 psi. Use it to inflate tires, top off your air shocks, air forks, inflate air beds or anything else.

If you will use the MotoPressor on a CANbus BMW please click on the More Information button.

! Do not use this pump in a standard BMW accessory outlet, unless it is wired directly to the battery and bypasses the motorcycle's electrical CANbus system. The CANbus monitors and limits the amperage of the accessory outlet. When you plug the MotoPressor into a CANbus equipped accessory outlet the CANbus will automatically shut off the circuit and the MotoPressor will stop working. It is not the fault of the Motopressor.

If you have a CANbus equipped bike and you are not SURE about using the accessory outlet, use the alligator clips to get power from your battery or better still connect the supplied SAE terminal connectors to your battery and get power from there.

Rim Strips





Rim Strips


New tires and tubes deserve new rim strips. Choose the correct size for your machine and toss the old cracked and broken ones. For 19" rims, please order the 18" rim strip. It will fit just fine.

Be sure and order the ADV/SM wide strip ONLY if you have supermoto rims. This is a 16" strip that will fit your SM rims perfectly.

Select items







Shinko 705


The 705 Series are DOT approved dual sport tires designed for 75% street and 25% trail riding. An aggressive tread pattern provides excellent wet and dry weather adhesion and the compound resists tearing while riding off road.

Select items







New! 100515

Set of Shinko 804-805


Utilizing the latest in big block tire technology these adventure tires are ideal for situations where a rider spends 40% on-road and 60% off-road. The 804 front and 805 rear are a great choice for those with plans to be off-road more than on-road, especially in wet weather.

There are 2 different sets available for the 950/990 depending on your configuration. The first is a 90/90-21 with a 150/70-17 rear for those with the more dirt oriented set-up. If you have an adventure wheel set up, you will require the 110/80-19 front and 150/70-17 rear.

Standard Duty Tubes







Heavy Duty Tubes





Motorcycle Tubes


High quality tubes made of a blend of natural and butyl rubber meet or exceed OEM quality standards.

The heavy duty tubes are 3mm thick and puncture resistant

Brakes

Back to Top

Select items




Warp 9 Brake Rotors

(Made in USA) KTM 950 & KTM 990

These awesome rotors are laser-cut out of a high-carbon content 410 stainless steel, lap cross hatch ground, and then heat-treated. The finished rotors are mounted on a floating black steel carrier for durability and strength.

The floating pins are an oversized CNC machined stainless rivet with stainless wave washer to ensure these rivets will not crush like more traditionally used steel pressed rivets. high temp paint is applied to surfaces like cooling holes and edges to provide a clean finished look.

Select items




EBC Double H Sintered Pads

KTM 950 & KTM 990

EBC Double H Sintered pads feature the HH friction rating - the highest in the industry

Provide maximum brake effect and last twice as long as organic pads


• Front pad kits include pads for both rotors


$115.95

EBC Semi Sintered Front V-pads

KTM 950 & KTM 990

Semi-sintered construction contains 30% copper by weight within and organic matrix

This design combines the long life of a sintered pad with less rotor wear common with sintered pads


• Includes pads for both rotors

Controls

Back to Top

$10.95

Crampbuster Cruise Assist

(Made in USA)

This little jewel reduces hand fatigue and cramping on long rides or daily commutes. The Crampbuster is not a throttle locking unit but rather a simple clip-on device which allows you to relax your grip while riding.

Altered Ratio Cam Options




$89.95

Vista Cruise Throttle Lock Kit

KTM 950 & KTM 990

Ease the pressure on your wrist during those long highway trips.

ProCycle has developed this unique kit to work with your OEM bars and controls. Just flip the thumb lever down to apply enough friction to hold the throttle in place.

Customize the power characteristics of your bike by simply adding an altered ration cam. The Control cam allows smoother more controlled throttle while the Quick cam lets you put the power to the ground quickly.

Throttle Lock Kit Includes:
  • Billet aluminum throttle tube with standard cam
  • Vista Cruise Throttle Lock
  • All mounting hardware
  • Tension adjustment tool

Select color




$154.95

CJ Designs Clutch Cooler

KTM 990

The CJ Designs KTM hydraulic clutch cooler holds more than 3X the stock amount of fluid, and helps to keep your clutch fluid cooler and topped off.

  • Uses your stock reservoir diaphragm
  • Stainless steel cap bolts and o-ring sealed
  • Available in orange or black
Choose Size:


Doubletake Mirrors

Sold Separately
Enduro Mirror

ADV Mirror

Made from a nylon and fiberglass composite, these mirrors are extremely durable. They easily fold out of the way when you head off-road.

Enduro Mirror 4" diameter

Ideal for dualsport use, where you want the absolute minimum profile when folded down. SAE spec convex glass gives a much greater field of view than flat glass.

ADV Mirror 3" x 5"

Adventure mirrors are designed for adventure riding where you want your mirror extended most of the time.

Mirrors mount to any 10mm perch. Mirror and arm included as shown in pictures. If you need a mount for your mirror, click here to see our split clamp mirror mount and mirror mount adapter.


$10.95

ProGrip 714 Rally Grips

Our Favorite Grips!

Replacing your handlebars? Time to replace those worn out grips? These grips feature a thicker design that dampens vibration. The soft shoulder allows ease of movement. Three wire-tie grooves are molded into the grip to make securing them a breeze.

Select Controller

BikeMaster Heated Grips


Highly efficient design delivers warmth faster than traditional heated grips.

Choose from the standard five level push button temperature controller, or the LCD display controller which shows the selected heat level and available battery voltage.


$21.95

Moose Molded Foam Handguards



Riding in the harsh conditions of winter? Good, we are too. These foam hand guards are great. You get the extra protection in bad weather to help keep your hands warm and dry. These just about double the protection from most plastic type deflectors.

The outer shell is made from heavy-duty 500-denier nylon with 1/2" closed cell foam to keep the wind, cold and rain at bay.

Select Color





639.95

GPR V2 Steering Damper

KTM 950 & KTM 990
 

This is the evolution of taking the proven GPRV1 steering damper and locating it under the handlebars. Mounting the damper unit under the bars allows for addition room on the top cross-bar or bar mounts.

This GPR setup is a good choice for the weekend warrior to the race professional that would like to raise the handlebar height. Perfect for desert and off-road GPs.

Select Color


$139.95

CJ Designs OEM Foot Peg Extensions

KTM 950 & KTM 990


This is one of the essential items that should be added to nearly every bike before you ride it. Give yourself the pleasure of riding with a secure platform for your feet that give positive grip and extend the foot bed so that you aren't riding with just half the width of your foot on the peg. If you stand up at all this will revolutionize your confidence level and make for a far less fatiguing ride.


  • Adds 1 5/8" length and 1/2" width
  • CNC machined billet aluminum
  • Comes with mounting hardware and installation instructions

$165.95

Pivot Pegz Mk3

KTM 950 & KTM 990

Pivot Pegz have set a new standard in footpeg performance and quality and now they are even better. The new Mark 3 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 3 also incorporates new heavy duty, long life springs and they come with a lifetime warranty.

Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever!

  • Mega wide 60mm platform
  • Widest and lightest pivoting pegs on the market
  • Open design = less mud packing
  • Unique multi-directional grip pattern

$144.95

CJ Designs Mk 3 Pivot Peg Extensions

All MK3 Pivot Pegz

This is one of the essential items that should be added to nearly every bike before you ride it. Give yourself the pleasure of riding with a secure platform for your feet that give positive grip and extend the foot bed so that you aren't riding with just half the width of your foot on the peg. If you stand up at all this will revolutionize your confidence level and make for a far less fatiguing ride.


  • Adds 1 5/8" length and 1/2" width
  • CNC machined billet aluminum
  • Comes with mounting hardware and installation instructions
Select Color:

$219.95

New! 011215

Warp 9 Adventure Pegs

KTM 950 & KTM 990 (Made in USA)


New from Warp 9, top of the line Adventure Pegs. a full 5" long and 2.5" wide will give your feet the perfect perch whether you are cruising down the highway or standing up hammering down a singletrack trail.

  • Ceracote coated Chromoly steel pivot for the ultimate in strength
  • Replaceable 7075 T6 Aluminum Platform
  • Permanent Stainless Teeth provide the ultimate in non-slip traction
  • Built-in bottle opener in the bottom!

$274.95

Fastway Adventure Foot Pegs

KTM 950 & KTM 990

This is the ultimate adventure bike platform, it measures 2.25" wide, 4.75" long.

Patented adjustable collars make it easy to run them in the 'standard' or 'low boy' positions on most bikes.

Gain more room for bulky boots, or for longer legs. Fastway Adventure pegs come with two sets of F3 cleats, one standard, one long. Kamber bolts lets you adjust the 'tilt' of your pegs to increase comfort, or to give better squeeze on your bike.


$199.95

Fastway Evolution Air Foot Pegs

KTM 950 & KTM 990

The new Fastway Evolution AIR footpegs are now the ultimate pegs in the Universe.

Designed and sculpted out of the best 7075 Billet aluminum by Pro Moto Billet elite engineers and machinists. Featuring Fastway's Patented adjustable height, traction, and camber options, the Evolution AIR footpegs are superior in every way.

Fastway Evolution AIR pegs are designed to shed mud and debris, while being ultra strong.

Luggage Racks

Back to Top

$199.00

Happy Trails SL Side Racks

 KTM950/990 (Made in USA)

The Happy Trails SL (Soft Luggage) Racks work perfectly with the Wolfman Expedition Dry Bags.

Features:

  • Thoroughly tested 4th generation side racks
  • Three point mounting system (includes mounting hardware)
  • Strong 5/8" round tubing for the arms and SL mounting loop
  • Racks add protection for the bike in the event of a tip-over
  • Each rack is fabricated by expert craftsmen
  • Racks finished with a black powder coat

Go to our Luggage Page and pick out any set of qualifying side bags or cases and get $20.00 off side racks!





$134.95

Pro Moto Billet Cargo Rack

KTM 950 & KTM 990(Made in USA)
pic

Not only are Pro Moto Billet Cargo Racks brutishly strong and functional, but they look great too. Each cargo rack is methodically engineered, then CNC machined on-site from a 1/2 inch thick plate of USA made 6061 aluminum by master machinists.

The cargo racks are then hard clear anodized for durability. PMB uses only stainless steel fasteners for worry-free years of riding. Excellent instructions and all necessary hardware is included.

Need to mount your turn signals to your new Pro Moto Billet Rack? Just add a set of CNC machined aluminum Turn Signal Brackets for $15.95 and that will be no problem. See bottom image.

Select Color

CJ Designs Tail Rack

KTM 950 & KTM 990 (Made in USA)

Great looks and rugged construction make this tail rack a must have for the adventure rider.


  • 11.5"x14"x.250" thick 6061-T6
  • Designed to be simple, strong and versatile
  • Pre-drilled for Roto Pax fuel pack mount
  • Designed with lots of mounting points so virtually any bag will fit
  • CNC machine finished out of 1/4" aluminum.
  • All edges and slots are chamfered so your tie straps won't be damaged or cut.
  • Over 100,000 miles of testing on the original model
Select Size/Color:

ROK Straps

The ultimate stretch strap

These flat tie down 'stretch' straps are designed specifically for motorcycles, ATVs and snowmobiles. Carry anything on your motorcycle securely and without scratches with these flat - no hooks - tie down straps.

ROK Straps are a must have for any dual sport or adventure rider!



ROK Straps are a two-piece strap that has a quick-release buckle in the middle and loops on each end.
One end of the strap is a heavy duty nylon, the other has a strong stretchable section. Instead of hooks
that can slip or come undone, ROK Straps have a loop sewn in each end. you pass the buckle around
your frame, rack or other secure point and then back through the loop in the end making for a very secure
mount. With each end secured, connect the buckle in the middle and simply tug the slack end of the strap
until your load is firmly held in place.

Luggage

Back to Top

Saddlebags & Hard Cases


Choose from a huge selection of sidebags and hard cases from top brands.

  • Wolfman Luggage
  • Nelson Rigg
  • Giant Loop
  • Moose Racing

Tank Bags


Tank bags provide easy access to personal items and come in a variety sizes, styles, and colors.

  • Wolfman Luggage
  • Nelson Rigg
  • Giant Loop

Duffel Bags


Select from an assortment of sizes, designs, and brands.

  • Wolfman Dry Bags and Rolie's
  • Saddlemen Destination Pack
  • Givi waterproof bags
  • Firstgear Torrent bags

Top Cases


Top cases by Moose Racing allow easy access and transportation of items for long rides or daily commuting.

  • Expedition Aluminum Top Cases are a perfect match for the Expedition Side Cases. Available in 25 or 38 liter sizes
  • Expedition Hard Top Cases are perfect for daily commuting and errands around town. Available in 28 or 47 liter sizes

Fender Bags


Fender bags are perfect for carrying tools and tubes on any adventure.

  • Wolfman 1.25 Liter front fender bag
  • Moose Racing removable rear bag
  • Wolfman 3.5 Liter tool bag
  • Chase Harper rear fender pack

Accessories


Luggage accessories to complete your luggage set.

  • RotoPax fuel and water containers
  • ROK Straps
  • Universal Mounting Kits
  • Much more!

Helmets & Apparel

Back to Top

Dual Sport Helmets


We have put together a great list of dual sport helmets for any budget.

  • Arai XD-4 Dual Sport features great quality and looks
  • Shoei Hornet X2 for serious dual sport enthusiasts
  • Bell MX-9 Adventure new for 2015 is everything you want at a great price
  • AFX 41-DS Dual Sport features an inner flip down sun shield
  • Fly Trekker gives great quality and price

Footwear


Our favorite dual sport boots have been tested and approved by the ProCycle staff.

  • New! 100115 Forma Adventure Boots
  • Icon Raiden DKR Boots
  • Alpinestars Scout Boots
  • Gaerne Balance Oiled boots

Rain Gear


Stay dry with quality rain gear by Frogg Toggs. Frogg toggs is committed to providing the best in affordable, innovative rainwear technology. ToadSkinz technology is a newly developed hybrid fabric that was engineered by the frogg toggs research team. This unique new material has the look and feel of a traditional polyester rain suit but with a non-woven inner layer that provides guaranteed waterproof and windproof performance in a lightweight garment with great breathability.

Gloves


Choose from a great selection of Firstgear dual sport gloves.

  • Ultra Mesh Gloves
  • Kilimanjaro Gloves
  • Kathmandu Gloves
  • Cold Weather Gloves
  • Many More!

Accessories


We have put some common sense dual sport items on our accessories section and will be adding stuff as we find it.

  • Hydration packs by Thor and Moose Racing
  • Backpacks from American Kargo and Moose Racing
  • Neck warmers and High-Vis vests

Dual Sport Apparel


Choose from top of the line jackets, pants and our every own ProCycle T-shirts

  • Kathmandu jacket and pants
  • Urge overkill Jacket
  • Adventure Mesh jacket
  • Firstgear Thermosuit
  • Kilimanjaro jacket
  • And more!

Heated Gear


Stay warm on those long winter rides with top of the line heated gear.

  • First Gear heated clothing features Nickel Alloy heating technology
  • Venture heated gear comes standard with harness and controller
  • Heat Pump Vest and battery powered gloves also available
  • Check out our Seat warmer and Heated grips

Accessories & Tools

Back to Top
New! 052316

Maps and Navigation




Check out our new Maps and Navigation page!

  • Butler Maps
  • Benchmark Maps
  • Delorme Maps
  • GPS Units
New! 052316

ProCycle NAVIGATOR


Navigation doesn't get any simpler than this. Here is the ProCycle 'binary' Navigator. Don't know which way to turn? Flip the NAVIGATOR and follow your nose. It is guaranteed to lead you somewhere. Probably some place you have never been.


$649.95 - $799.95

Garmin 390LM, 660LM and 665LM





Designed by riders for riders, the new Curvy Road routing leads you to the roads most fun on a motorcycle. This programming is standard on the Zumo 390LM. This unit is also equipped with a Tire Pressure Monitor System (valve caps purchased separately). It is bluetooth enabled so you can chat with your helmet on or just listen to the directions from your 390 so you can keep your eyes on the road where they should be.

Simply connect your Zumo with your cell phone and/or a bluetooth-enabled headset. Your Zumo unit will transmit voice prompts to your headset allowing you to hear the street names and navigation commands.

Each of these Zumo systems is designed with an on-board MP3 player so you can enjoy your music, podcasts, etc. Each Zumo also has a picture viewer so you can bring favorite photos along for the ride.

In addition to all these great features, each Zumo has a built-in trip computer with compass display. There's also a speed limit indicator so you know when to throttle down and avoid a ticket.

Another very handy tool is BaseCamp. This web based tool lets you create routes along specific roads and search for and save points of interest, restaurants and fuel stops. Upload your pre-planned trip to Zumo and follow along for a stress free ride. With BaseCamp you can combine track logs, waypoints, geotagged photos, YouTube videos and more into an adventure that you share online. Garmin Adventures is a free, interactive way to record and share your rides.

The Zumo 665LM has SiriusXM Satellite Radio, NavWeather and NavTraffic. Separate subscriptions required for these services.

Protected against water immersion for 30 minutes at a depth of 1 meter.

Click here to read the entire lifetime maps terms and conditions on the Garmin website.


$28.99

Trimax Rotor⁄Disk Lock


This lock is a must have for any rider. Features a 10mm hardened steel pin that will resist any attack.

Comes with carry pouch and a disc lock reminder cable. Includes three keys, one with a mini flashlight.


$17.95

Tirepro Digital Tire Gauge


  • Large display, readings are shown to 0.1 psi
  • Kpa and Kg-cm2 scales also provided
  • Reads up to 99 psi
  • Ergonomic shape fits nicely in your hand

$29.95

Clutch Holding Tool


clutch tool

Clutch holding tool

Made from medium carbon steel with hardened jaws. It features spanner pins and the jaws open up to 5" wide. It's ideal for holding clutch hubs, flywheels, gears, sprockets, etc. From Motion Pro

$51.95

Snapjack Portable Jack


The Snapjack is an easy to use, portable, sturdy jack for chain lubricating, adjustment and chain drive maintenance. Also simplifies cleaning. It can lift the rear tire up to 1/2" to allow the tire to spin freely. Includes front brake locking strap and handy carrying bag.


$29.95

Tire Bead Breaker


Changing tubes or tires without the right tools can be a real chore. Don't fight your snug beads any longer, use this 27" long tool that opens to 7-3/4" to provide the leverage you need to easily break your tire bead. Constructed from heavy-duty steel with comfortable no-slip grips, this tool makes the job a snap.

$10.95

Oil Filter Removal Tool


For easy removal of recessed KTM non-reusable oil filters. Conical point screw pierces and grabs the sheet metal end cap on the filter.

$59.95

"Tread Doctor" Knobby Cutting Tool


Refresh your front or rear tire instead of throwing them out! Tread Doctor Lightweight heated tool lets you quickly cut new edges into your dull worn out knobby tires.


$17.95

Warp 9 Valve Stem Puller Tool



This ultra-cool little tool is used to pull the valve stem through the hole on motorcycle rims saving your finger tips when changing tires, fixing flats or any time the tube has to come out of the rim. It threads inside the valve stem making it easier to pull through the rim hole. You can use it as a valve stem puller, valve core removal tool or a tire deflator.

Handle is CNC machined and has a threaded hole in each end, one to hold and protect the threaded end of the tool and one for a spare valve core (not included). Anodized blue for good looks and corrosion resistance.


Slime


Slime Tube Sealant is formulated and tested for use in all tube tires. Once installed, Slime remains liquid and will not harden or dry out. Slime is guaranteed for 2 years.

As the Slime treated tube rotates, centrifugal force pushes the sealant to the tread area creating a layer of protection, repairing punctures as they occur and treating existing punctures. Slime is not intended for use in tubes losing pressure from sidewall punctures, bead leaks, damaged rims or faulty valves. Slime for tube type tires is not recommended for use in tubeless tires.

  • Prevents and repairs punctures up to1/8".
  • Remains liquid inside the tire, coating the tread area as the tire rotates.
  • Non-toxic, non-hazardous, non-flammable, non-aerosol and water soluble.
  • Tubes treated with Slime can be patched with a conventional vulcanized patch using a bit of patience and care.

$35.95

Mini-Morph Pump


The Mini-Morph is actually a bicycle pump, but is probably the best compact pump we have found for adventure / dual-sport riding. It has a fold-out foot and handle as well as a 4 inch hose so you can set it on the ground to pump. At only 10" long, it is small enough to pack anywhere.

$19.99

New! 051717

Moto Caddy Document Holder

(Made in USA)
Moto Caddy Document Holder
Moto Caddy Document Holder

The perfect document holder where you can keep your registration and insurance papers tucked up and out of the way in a water-resistant container. Just zip-tie it to you bike wherever you like and off you go. The Moto Caddy is really two containers in one - the longer side is 4 inches long, good for your paperwork, while the other end has a 1 inch depth, perfect for some emergency coins!

$19.95

New! 081517

BrakeFix Parking Brake


BrakeFix

Simply slap this baby over your brake lever and hand grip, squeeze the brake lever, pull the locking bar in and lock black portion down. Takes all of about 5 seconds. Viola! A locked front brake making parking safe and secure.

To unlock the BrakeFix, you just lift the back of the black hooking portion to release it. This takes about 2 seconds. Perfect for use with Snapjack type stands or just parking on an incline.

$14.95

New! 051017

Super Siphon


Super Siphon

This is a new and improved Super Siphon with a longer and larger hose (1/2" x 6´) makes it even easier to transfer fuel from one bike to another! Simply shake the hose to prime it and get fuel moving. With 6 feet of hose it is no problem to reach whatever needs a bit of your gas. The hose is resistant to gasoline and any other hazardous chemicals. Roll it up and stuff it in your bag and you will be very happy when you need it. And need it you will one day.

$19.95

New! 060115

Deluxe Folding Saw


A must have when blazing new or old trails!

  • Soft rubber handle
  • Thumb latch release for safety
  • 8" blade, 9" folded length
  • Steel frame

$6.95

Cycle Wipes


Cycle Wipes are pre-moistened and pre-folded towelettes made with a special non-woven "Dirt-Grabbing Mesh Fabric," which is a fancy way to say that they are soft, gentle, durable, and a lot safer than that old rag or paper towel.

Their formula contains no harmful ammonia and is specifically formulated for helmet face shields.


$19.95

Stash Box Locking License Plate Storage


The Stash Box is a weather resistant storage box that mounts between the motorcycle and the license plate. It is ideally suited to storing the vehicle registration and other small objects while remaining unobtrusive. The Stash Box has features that provide benefits over other motorcycle storage devices i.e., low cost, concealed mounting location, lockable, vehicle styling is unaffected, and easy accessibility.

  • Sized to work with all standard size license plates as well as the current Wisconsin and Ohio plates
  • External Dimensions: 7" x 4" x 1" plus 1" on the width for the lock
  • Made from molded polypropylene
  • Includes all mounting hardware, retention pouch for paper documents, foam insert, lock and two keys

$12.95

Tow Strap


When you need the Buddy Tow, it's priceless! This is the only tow strap made expressly for motorcycles and ATVs. Tucked away in its carrying case attached to you handlebar or crossbar, the Buddy Tow is always ready when you need it.

This simple accessory - 12' of 1785 lb. test strength 1" webbing in a handy carry pouch should be a standard part of every rider's kit. Whether used to tie your bike down in a truck or ferry boat's car deck, tow a friend into the nearest gas supply or hold down a tent the Buddy Tow has endless uses.


$19.95

Waterproof First Aid Kit


 

Kwik Tek waterproof first aid kit is the perfect size for your "Don't leave home without it" list.


$36.95

Smart Caps


Ride-On offers riders a first-class Tire Pressure Monitoring System known as an LED Smart Cap.

A blinking red light on the Smart Cap indicates a loss of 4 PSI or more. Has a 3 year battery life!

If you purchase a 2-pack motorcycle pack you will enjoy FREE Ride-On LED Smart Cap Roadside Assistance (for public roads only). You will find detailed information on this FREE service on Ride-On's website. Click here to read more from their website.


$33.95

Mini Air Compressor


Portable 12v compressor is perfect for any tool kit. This unit weighs in at only 14oz and measures just 4"x2"x6".

Features a built in LED light and 0-120 psi gauge

• Comes with everything shown


$5.95

Motul M4 Hands Clean


A handy addition to the tool box or in your traveling pack. This is amazing stuff! Rub a little bit of the paste onto your dirty hands and it lifts the dirt right off. A little more rubbing turns it into dry flakes that brush away. M4 Hands Clean is not messy or greasy.

$8.95

Rim Protectors

Sold in pairs

Protect your wheels from scratches and dings caused by tire changing tools

Includes retrieval cord for easy use

$8.95

Motul C5 Chain Paste


A new innovative product from Motul. This chain lube comes in a brush applicator squeeze-tube bottle. It makes applying chain lube easy and less messy than spray on lubes. Chain Paste is easy to carry with you on those long trips.

Didn't find what you are looking for?
We have millions of parts and accessories not listed on our site available from our vendors.