Help us pick a winner! Vote HERE for your favorite photo to be featured in next years calendar.  Top 3 win prizes, voting ends September 29 at 5pm pst.

990 Adventure: Drivetrain

  The KTM 990 adventure came to be in 2006 as the successor to KTM's 950 adventure and stayed in production until 2013.  The 990 adventure has a DOHC 999cc 75* V-twin motor with 11.5:1 compression ratio mated to a 6 speed transmission. 105hp and 74lb-ft of torque. The dry weight is 461 lbs. and has a 34 inch seat height with a 19.5 L (5.2 gal) fuel capacity.

Chain Size:      Front Sprocket:      Rear Sprocket:      Front Tire:      Rear Tire:      Spark Plug:     
525-118 17T 42T 90/90/21 150/70-18 DCPR8E (Pre-'09)
525-118 17T 42T 90/90/21 150/70-18 LKAR8BI9 ('09-'13)

 

Drivetrain

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Drive Chain: 525

990 Adventure '07 - '13

High Quality chain. Will need to be cut to fit your sprocket combination.

Lower friction and longer life. X-rings have twice the sealing ability as compared to o-rings. They do a better job of keeping the lube in the links and the dirt out. DID VX chains have a reputation for being the best chain you can buy for dual sport riding. DID VX chains come with rivet type master links.

Choose Type / Length

Ships in 3-5 business days

$160.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Master Link

Universal fit. May require additional adjustment or modification.

Always carry a spare master link when out on the trail.

Thumbnail

  Important! Master links are not interchangeable. Be sure to check the manufacturer and series on your chain.

Thumbnail

  These do not fit the TW200 or XT250. Only for 520 os 525 chains, Please verify chain size.

Choose Pitch / Type
Add Master Link Pliers

Ships in 1-2 business days

$7.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Cush Drive Rubber Dampers

990 Adventure '07 - '13

Replace these any time you feel excessive play in the sprocket hub.

Excessively worn dampers can cause the cush hub bearing to fail - which will ruin your sprocket carrier.

Sold as a full set.

Please contact us for availability information

$37.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Front Countershaft Sprocket, JT

990 Adventure '07 - '13

These quality JT sprockets are made from the finest 545C high carbon steel and are then heat treated and hand finished to meet or exceed OEM standards. Outlasts many mild steel or surface hardened sprockets as much as two and three times over.

Select Size

Ships in 3-5 business days

$21.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Rear Sprocket, JT

990 Adventure '07 - '13

These quality JT sprockets are made from the finest 545C high carbon steel and are then heat treated and hand finished to meet or exceed OEM standards. Outlasts many mild steel or surface hardened sprockets as much as two and three times over.

Choose Size

Ships in 3-5 business days

$49.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Chain Adjustment Tool, Slack Setter Pro

Universal fit. May require additional adjustment or modification.
  • Accurately and quickly measures chain slack
  • Two scales measure both chain slack and chain to swingarm clearance
  • Setting chain slack properly dramatically improves chain life
  • Lightweight compact design fits easily in your tool box or road kit
  • Works on most street and dirt bike applications up to 75mm chain slack
  • Made from engineered nylon with aluminum measuring scale
  • Anodized laser-etched precision measuring scale
  • Refer to your owner's manual for proper chain slack and procedure
  • Patent pending

Ships in 1-2 business days

$19.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Chain Alignment Tool, Motion Pro

Universal fit. May require additional adjustment or modification.

Designed for quick and accurate alignment, this tool clamps squarely to the rear sprocket so the alignment rod can indicate sprocket alignment with the chain.

Ships in 1-2 business days

$18.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Chain Breaker / Rivet Tool, Moose

Universal fit. May require additional adjustment or modification.

Can break or rivet chains from #35 to #530 like a pro.

kit includes a 2mm, 3mm, and a 4mm pin to fit most chains.

kit includes press plates,and all necessary riveting pieces and comes in a durable plastic case.

NOTE: when breaking a chain, YOU MUST grind the heads off of both pins on a link first.

Ships in 1-2 business days

$74.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Chain Breaker Tool

Universal fit. May require additional adjustment or modification.

Here is a tool to help you remove a few links from a chain that is too long. A great tool to have in your tool box.

Thumbnail

  Note! The head of the pivot pin you are going to remove must be ground down level with the side plate before using this tool to push it out. Failure to do that will cause damage to the tool that is not covered by any warranty!

Ships in 1-2 business days

$16.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Chain Brush - 360°

Universal fit. May require additional adjustment or modification.

This brush has 2.25 coils of 360° chemical-resistant nylon bristles to make it the fastest, most effective, precise and systematic method for giving your chain a thorough cleaning. It will help the performance and life of the chain, sprockets, and the engine. This brush will fit any 400 or 500 series chains.

Ships in 1-2 business days

$12.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Chain Brush - The Grunge Brush

Universal fit. May require additional adjustment or modification.

Innovative design that cleans chain from 3 angles at once. Long handle keeps fingers and hands away from chain and sprockets.

  • Will not harm O-ring chains
  • Easily adjustable for all chain sizes

Ships in 1-2 business days

$13.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Chain PBR Tool, Motion Pro

Universal fit. May require additional adjustment or modification.
  • PBR = press, break, rivet
  • Innovative design will press, break and rivet 520, 525 and 530 chains with one convenient tool (not for use on 428 chains)
  • Versatile design will remove chain pins, press master-link plates and rivet hollow nose and soft nose (quad stake) master link pins on O-Ring and non O-Ring type chains
  • Easy-to-use design allows you to change tool functions by simply moving the position of the anvil block
  • Indexing letters on movable anvil and body ensures correct tool configuration; simply line up the letter on the anvil to the letter on the body to get the configuration you need
  • All components conveniently store on tool when not in use
  • All steel construction with heat-treated components for strength and durability
  • May be supported in a vise or held with included handle
  • Great for the professional technician or DIY mechanic
  • Compact and light enough to carry in a tool bag for trail-side repairs
  • Patent Pending

Ships in 1-2 business days

$104.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Master Link Pliers

Universal fit. May require additional adjustment or modification.

Make your life a little easier by having a set of these in your toolbox. Designed to simplify installation and removal of clip-type master links. One tip is shorter and notched to be placed on the pin which allows the longer end to push the clip.

Ships in 1-2 business days

$23.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Master Link Press Tool, Motion Pro

Universal fit. May require additional adjustment or modification.

This Motion Pro press tool is a must have when installing and removing Clip-Style master links (520, 525 & 530 sizes).

Easily presses on and off master link plates, works on 520, 525 & 530 Clip-Style master links.

Maximum master link width 24.8mm.

Will not damage master links, hardened steel pins for reliable use.

Light weight billet aluminum construction.

Ships in 1-2 business days

$36.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Master Link Press Tool, Wirth Machine

Universal fit. May require additional adjustment or modification.

A high quality master link press tool from Wirth Machine used for the removal and installation of master links using a press fit link plate.

Fits 520, 525, and 530 pitch chain.

Ships in 1-2 weeks

$36.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Sprocket Wrench Kit, Warp 9 Racing

Universal fit. May require additional adjustment or modification.

ULTIMATE SPROCKET WRENCH KIT

  • 12” long wrench gives you more torque to get those thread locked sprocket bolts off easily
  • Double ended 12mm & 13mm to fit all modern motocross, Enduro and dual sport bikes
  • Dog leg wrench design allows wrench to easily clear rim edge and wide tires
  • 8mm allen fits most Japanese bikes 8” long for extra leverage
  • Torx T45 fits late model KTM and Husqvarna bikes, 8” long for extra leverage
  • Vinyl coated handles to protect rim edge and give a non slip grip
  • Makes routine sprocket bolt maintenance a quick and easy job

Backordered: currently processing orders from September 2023

$19.95