Available in unisex Black and Charcoal Gray. These have our logo on the front left shoulder and on the back, with our tag line "Back Roads or No Roads" down the right sleeve in Yellow.
The KTM 950 Adventure was released in 2003 and ended production in 2006 to introduce its successor the 990 adventure. The 950 adventure is a 942cc 75* V-twin, 11.5 compression ratio, making 102 bhp & 72 lbs-ft of torque mated to a 6 speed transmission, 35 inch seat height, a dry weight of 454 lbs and a 22 L (5.8 gal) fuel capacity.
|Chain Size:||Front Sprocket:||Rear Sprocket:||Front Tire:||Rear Tire:||Spark Plug:|
|525x118||17T ('03-'06)||42T ('03-'06)||90/90/21||150/70-18||CR8EK|
Calendars are in stock now. Get yours before we run out!
We have two sizes available. The desktop calendar is the perfect size (6" by 3.75") to sit on your desk.
The wall calendar is 11" by 17" when fully open for use on your wall or next to your desk.
Use them at the office or in your home to remind yourself of where you would really like to be, and doing what you really love the most - riding your bike!
Saddlemen's Destination Pack secures your valuables within a steel wire mesh sandwiched between a scratch-free, soft inner liner and a tough water resistant nylon outer bag to provide vault-like protection. A velvet smooth inner liner protects your cargo while a six-foot-long flexible stainless steel cable secures the bag to the bike or other permanent structure. (Padlock not included.) The cable doubles as a motorcycle security cable - prevents theft of bag or bike. 12 x 24 with a 44 liter capacity.
Limited Quantities Left! Grab yours now while supplies last.
10mm diameter - Includes three valve shims of each size from 1.85 to 3.20 in .05 mm increments. 84 shims in total, 83 cents per shim!
Available in orange
Manufactured by Samco Sport UK - the world leader in silicone hose, with over 20 years experience.
- Hand wrapped and 100% visually inspected in the UK
- European grade high-temperature silicone guaranteed to 356°F
- Improved insulation promotes radiator efficiency and improves engine cooling
- Three layers of reinforcement fabric offer high burst pressures and provide better debris/crash resistance
- Used by leading MX/Enduro and Off-road teams
Barnett high performance clutch kit includes drive plates, carbon fiber friction plates, and heavy duty springs.
- Reduce wear, and significantly increase your engine life.
- Easy to install. Place on outer side of filter.
- Powerful magnet traps abrasive metal particles down to 1 micron. OEM oil filters only filter particles down to 90 microns, leaving behind the most harmful particles to circulate through your engine.
This should be the last oil filter you will ever buy. Made from laser cut, medical grade, 304 stainless steel micronic filter cloth, this filter provides 200% more filter area in many cases. Most good paper filters will pass particles in the 90 to 95 micron range, and some tested, as much as 300 microns. Sand is about 125 microns and a white blood cell approximately 25 microns. Scott's stainless filter catches items down to 35 microns "absolute", which is about 3 times better than most good paper or brass filters. The pleat seam is welded, able to withstand up to 600 degrees in our filter, not glued, like paper filters.
Providing unbeatable performance and exceptional value, Hiflofiltro is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.
Includes degree wheel, dial-gauge, multi-position stand, extension, 3-sizes of positive-piston stops, and a handsome wooden carrying case.
Made from medium carbon steel with hardened jaws. It features spanner pins and the jaws open up to 5" wide. It's ideal for holding clutch hubs, flywheels, gears, sprockets, etc. Made by Motion Pro.
This tool is designed to separate vertically split crank case halves on two and four stroke engines. Adjustable arms allow it to be used on multiple bolt patterns found on a variety of makes and models of motorcycles. Industrial grade steel construction with black oxide finish for long service life. Comes with 8mm mounting bolts and 6mm adapters. Protective carrying case included.
For easy removal of recessed KTM non-reusable oil filters. Conical point screw pierces and grabs the sheet metal end cap on the filter.
For easy removal of recessed oil filters.
Conical point screws pierces and grabs the metal end cap of the filter.
reduces potential damage to the engine cases.
NOT for use on re-usable oil filters.
A 3-pack of easy to apply strips measure the temperature of engine, suspension, and radiator components. Temperature range 146° to 248°
Thread Chasers are designed to clean and re-cut damaged aluminum threads.
this kit contains the two sizes most common on metric motorcycles, M6x1.0 and M8x1.25.
Thread Chasers also remove dirt and metal shavings that become captured in thread grooves.
Uses 8mm or 10mm hex sockets, a Must for all tool kits.
Dual marked feeler gauges. 32 blades from .03mm/.001" to 1mm/.040"
Fuel and Intake
Genuine KTM replacement air filter. Replace your air filter at recommended service intervals.
Unsurpassed in airflow, dirt stopping and overall performance. Adding a pre-filter to your intake system gives you extra protection from damaging contaminants.
Sold in 6 packs
- Compatible with many air filter boxes.
- More air flow allows you to add more fuel to your intake mixture, increasing performance.
This canister by Pro Circuit allows you to move the overflow tubes from the carburetor up and out of the way. Universal application.
Become more visible and look cool while doing it. The ProCycle Natural Tank LED Light Kit will add more light to your bike with the push of a button.
Kit includes a handle bar mounted lighted switch, two 12" LED light strips with adhesive backing, four saddle splice connectors, and a center harness for connecting to your bikes harness.
Installation is quick and easy.
*Please note All colors other than amber and white are recommended for off road use only*
If you're like us, you hate the long floppy vent hose hanging off the cap of your aftermarket tank. This one-way vent cap replaces the long hose with a short one only about 2" long. It allows air into your tank but prevents fuel from sloshing out. Machined from billet alloy and anodized for good looks.
Not for stock fuel tanks!
The small size and right angle hose barbs make this filter easier to fit into the small space between your fuel petcock and carburetor. Filter body is only 7/8" diameter. Straight filter is 2" long, 90 degree filter is only 1-5/8" long.
This filter is meant for 5/16" fuel lines. Only 1/2" thick it is small enough to fit just about anywhere.
Fuel supplies can be sketchy at times. This filter lives in your tank to trap dirt and debris as it is poured into the tank. Features a custom shaped adapter that fits securely under the gas cap, creating a leak-proof seal. If it stays out of your fuel, it can't get into the carburetor! Created by the filter experts at Twin Air, this filter fits IMS, Acerbis and Safari brand gas tanks.
Ordering new fuel line? How about a set of fresh zinc plated clamps to go with it?
These will be sure your fuel line stays connected. A pack of 8 clamps in 2 sizes to fit most 1/4 or 5/16 fuel hose.
Hose reducer to go from 5/16" line down to 1/4" line. Many bikes have 5/16" carburetor spigots but most aftermarket petcocks are 1/4". This solve the problem of mismatched sizes. Solid brass construction. Can be used to route or repair fuel lines, oil lines or air lines. Barbed ends provide a secure fit.
30" lengths. Sizes shown are ID. All of these lines are stronger and more durable than vinyl fuel lines and are resistant to swelling, UV light, as well as hardening and cracking.
Need to mount two containers? A water and a fuel? Two waters? Already have a RotoPax Mount for a single container? Get this extender to work in conjunction with a pack mount and that will be no problem! Single mount, two containers.