Same-day shipping cutoff: Noon Pacific Time

V-Strom (DL650)

Chain Size:        Front Sprocket:        Rear Sprocket:        Front Tire:        Rear Tire:        Spark Plug:
525x116 15T 47T 110/80-19 150/70-17 CR8E

 

Featured Products

The ultimate in protection for the bottom of your 650 V-Strom. Constructed from 5mm aluminium 5083 plate. Selected because of its extreme suitability for welding and impact resistance, this material makes a great looking and very strong Bash Plate. This plate extends up far enough to be a great Oil Cooler protector as well. All Bash Plates have a polished finish and have foam or rubber where required.

Choose Option
Ships same business day
$372.95

The Cogent Dynamics DDC valves are the most cost-effective upgrade you can make to your motorcycle’s forks. Unique and the first of its kind, a DDC kit is available to upgrade many motorcycles that are originally equipped with simple damper rod type forks as front suspension.

We do recommend stiffer than stock front springs to bring the full potential of the DDCs out. Up to about 200 pounds (rider with gear on) we recommend the .85 kg/mm springs. If you are above 200 pounds (rider with gear on) you should probably go with the 1.0 kg/mm springs.

Ships same business day
$219.95

Engine

V-Strom (DL650) '07 - '11

+2mm oversize from stock.

Requires cylinder boring only. Bore Diameter: 83mm, Piston Diameter: 82.95 mm

12.5:1 compression. Includes pistons, rings, pins, clips and head gaskets.

All Wiseco Pistons are forged from high silicon, low expansion aluminum which offers superior strength, reduced weight, improved heat transfer, and longer life.

Diamond turned finish from one of the many CNC computer controlled turning centers guarantees you a perfect finish with no size variation. Wiseco pistons can be installed in any of today’s cylinder bore compositions (cast iron, chrome, nikasil and boron)

Wiseco’s wide range of oversize pistons increase the life of cast iron lined cylinders. 

Wiseco’s state-of-the-art computerized manufacturing facility is dedicated to supplying both the high-perfomance racer and recreational enthusiast with the finest forged piston available in today’s market place.

Please contact us for availability information
$514.95
V-Strom (DL650) '04 - '25

CNC machined from billet aluminum and then finished in a beautiful gunmetal color. These replace the factory automatic tensioners that can fail. These tensioners eliminate the timing problem that can be caused by the automatic devices. Also gets rid of the excessive tension and premature engine wear caused by the stock unit.

Includes:

  • 2 tensioners
  • Gaskets
Please contact us for availability information
$117.95
V-Strom (DL650) '04 - '25

Your automatic cam chain tensioner is spring loaded. This can make it difficult to install as it wants to extend before you have it bolted into place. This handy tool will back off the cam chain tensioner mechanism and hold it for you. No more awkward 3-handed contortions are required to get the tensioner installed.

Ships in 3-5 business days
$99.95
V-Strom (DL650) '04 - '25

7.48mm diameter - Includes three valve shims of each size from 1.20 to 3.50mm in .05mm increments.

141 shims in total. 0.57 cents per shim! Does your local dealer have the shims you need?

Ships same business day
$114.95
Universal fit. May require additional adjustment or modification.

K&L® shims exceed the maximum of the Apparent Rockwell Hardness "C" scale. Shims average 47.0 compared to the 46.0 maximum.

These kits fit multiple brands and models, please verify correct size for your model before purchase.

13mm diameter - Includes two valve shims of each size 2.30, 2.40, 2.50, 2.55, 2.60, 2.70, 2.80, 2.90, 3.00 and 3.10.  In a shim box.

20 shims in total. From K&L.

KAWASAKI

Choose Shim Size
Ships same business day
$219.95
V-Strom (DL650) '04 - '25

Higher pressure in the cooling system, raises the coolant boiling point and increases protection from coolant loss due to overheating.

23 PSI - 1.6 Bar.

Ships same business day
$29.95
V-Strom (DL650) '04 - '25

Complete set of clutch friction plates for your V-Strom.

Ships same business day
$99.95
V-Strom (DL650) '04 - '25

High quality clutch cover gasket. If you are servicing your clutch, a new gasket will prevent oil leaks.

Add Gasket Remover
Please contact us for availability information
$17.95
V-Strom (DL650) '04 - '25
  • Constructed using the best materials available
  • TUV approved and production monitored to ensure OEM or better quality
  • Sold as a package of 5 oil filters
Ships same business day
$35.95
V-Strom (DL650) '04 - '25

Extra protection for your motor! Strong magnet at the end of the plug picks up ferrous metallic flakes in your oil, protecting your engine!

Ships same business day
$16.95
Universal fit. May require additional adjustment or modification.

Hardened chrome vanadium steel with built in rubber insert to hold spark plug steady.

Thin wall bi-hex sockets designed to access narrow spark plug holes.

Fits 3/8" square drive and hex drive, 14mm, 16mm, 18mm, 21mm.

Choose Size
Ships same business day
$14.95
V-Strom (DL650) '04 - '25

Keep your motor running right with a fresh plug.

A Dual Electrode spark plug will last longer than a single electrode plug because the wear is shared between the electrodes.

Choose Spark Plug
Ships same business day
$12.95
V-Strom (DL650) '04 - '25

E3 Resistor Spark Plugs

  • Unique electrode shape maximizes the power created by the spark plug – Diamond Fire technology
  • Electrode is a combination of performance and technology that results in an improved flame kernel shape
  • This flame front ignites the bulk air/fuel mixture faster, moves heat into the combustion chamber faster and creates a more localized pressure front for faster pressure rise during the cylinder power stroke
  • The result is more complete combustion and an improvement in engine performance
  • A truly premium performance plug
  • Sold individually, unless otherwise stated.

(Pair)

Add Anti-Seize
Ships same business day
$19.95
V-Strom (DL650) '04 - '25

Iridium spark plugs are made with premium quality materials.

Iridium plugs last longer than standard ones, meaning you won't have to replace them as often.

  • The ultimate in the evolution of spark plug technology and performance from an industry leader
  • The iridium electrode is 25% smaller than a platinum electrode, and it's just 1/4 the size of a conventional nickel electrode
  • Ultra-small diameter center electrode reduces voltage requirement and extends ignition system life
  • Metal shell plating has enhanced anti corrosion qualities

Sold individually, unless otherwise stated.

Add Anti-Seize
Ships same business day
$23.95
V-Strom (DL650) '04 - '25

Keep your motor running right with fresh spark plugs!

NGK is one of the world's largest manufacturer of spark plugs, whose products are used as original equipment (OE) on countless motorcycle and automobile models.

  • High-quality materials and superior construction for serious power and reliability
    • Pure alumina silicate ceramic insulator provides high strength and better heat transfer
    • Deep-seated copper core for a wider heat range
    • Nickel alloy tip for longer life
    • Trivalent metal plating provides superior anti-corrosion and anti-seizing properties
  • Choosing the right high-quality plugs prevents fouling from running too cool and preignition from running too hot
  • NGK plugs available for almost every application and riding style
Add Anti-Seize
Ships same business day
$16.95
Universal fit. May require additional adjustment or modification.
  • Contains degree wheel, standard unit indicator, adjustable magnetic stand, and three positive stops (10 mm, 12 mm and 14 mm threads)
  • Can be used to install and adjust timing of any cam
  • Wooden carrying case
Ships in 3-5 business days
$315.95
Universal fit. May require additional adjustment or modification.

Made from medium carbon steel with hardened jaws. It features spanner pins and the jaws open up to 5" wide. It's ideal for holding clutch hubs, flywheels, gears, sprockets, etc. Made by Motion Pro.

Ships same business day
$32.95
Universal fit. May require additional adjustment or modification.

This tool is designed to separate vertically split crank case halves on two and four stroke engines. Adjustable arms allow it to be used on multiple bolt patterns found on a variety of makes and models of motorcycles. Industrial grade steel construction with black oxide finish for long service life. Comes with 8mm mounting bolts and 6mm adapters. Protective carrying case included.

Please contact us for availability information
$112.95
Universal fit. May require additional adjustment or modification.

For easy removal of recessed oil filters.

Conical point screws pierces and grabs the metal end cap of the filter.

reduces potential damage to the engine cases.

NOT for use on re-usable oil filters.

Ships same business day
$13.95
Universal fit. May require additional adjustment or modification.

A 3-pack of easy to apply strips measure the temperature of engine, suspension, and radiator components. Temperature range 146° to 248°

Ships same business day
$14.95
Universal fit. May require additional adjustment or modification.

Thread Chasers are designed to clean and re-cut damaged aluminum threads.

This kit contains the two sizes most common on metric motorcycles, M6x1.0 and M8x1.25.

Thread Chasers also remove dirt and metal shavings that become captured in thread grooves.

Uses 8mm or 10mm hex sockets, a Must for all tool kits.

Ships same business day
$5.95
Universal fit. May require additional adjustment or modification.
  • 26 straight blades
  • SAE and metric markings
  • Check for clearance on valves, ignition points etc.
  • Includes 26 blades varying in thickness from .0015"/.038 mm to .025"/.635 mm
Ships same business day
$12.95

Fuel and Intake

V-Strom (DL650) '04 - '06

Most fuel injected systems are very lean in their stock configuration. This is good for economy and emissions, but not performance. This unit allows you to adjust the Fuel/Air (F/A) ratio without remapping the ECU and getting into complicated software programs. The PowerJet Fuel Controller allows you to adjust the fuel map from -4% to +10% by selecting one of 10 built-in settings (including stock).

The device works by measuring the outside air temperature very close to where the stock sensor is located and then adjusts the signal from the OEM air temperature sensor to the ECU to make use of the Air Temperature Correction factor that is built into the stock ECU. The ECU is told that the intake air is a little cooler than it actually is and it responds by richening the injection map very slightly. How much depends on your setting on the PowerJet. This will result in improved throttle response, especially if you have an aftermarket exhaust of any kind.

PowerJet is easily installed by plugging it in between the stock AIT sensor and the bike's wiring harness under the seat. This can be done very quickly as they are exactly the same plugs. Unplug the stock connection, plug in the PowerJet on each side. The PowerJet fits easily under the seat behind the battery as it is rugged and waterproof. PowerJet comes with a full one year warranty.

Choose Model /Year
Please contact us for availability information
$129.95
V-Strom (DL650) '02 - '11

The EJK evolved out of the need to address the ever-increasing complexity of factory fuel injection. For the newcomer to the market or professionals wanting an easier method for tuning fuel injection, the EJK is a customizable solution for the rider that wants to take control of their tuning needs.

This unit is a piggy-back EFI controller because it does not replace the stock ECU, but rather monitors the signals to the injectors and makes fuel adjustments based on the mode settings. The GEN 3 has a push button interface allowing access up to 6 different modes to allow for quick fine tuning by the end user without needing a computer.

Key Features:

  • No computer or dyno needed!
  • Plug and play, simple to install, base settings preset
  • Unique load based technology
  • Full range tunability available
  • Does NOT interfere with stock ECU operation
  • Simple push button adjustment interface
  • Water-resistant 
  • 2-Year warranty
  • Compact size - 2.2" H x 3.4" W x 0.5" D
Please contact us for availability information
$249.95
Universal fit. May require additional adjustment or modification.

Genuine Keihin spring, washer, and oring for the fuel screw of FCR and FCR MX carbs.

Just the parts…
Fuel screw spring, washer, o-ring (fuel screw not included)

Ships same business day
$8.95
V-Strom (DL650) '04 - '25
  • Increased air flow over the stock air filter
  • Designed to increase horsepower and throttle response
  • Easily fits inside the factory air box
  • Larger surface area over foam filters which offers longer service intervals in dusty conditions
  • Four layers of premium cotton gauze provides outstanding filtration
  • Washable & re-usable, never wears out
  • One filter will last the lifetime of your bike
Add Air Filter Care Kit
Ships in 3-5 business days
$69.95
Universal fit. May require additional adjustment or modification.

Sold in 6 packs

  • Compatible with many air filter boxes. Easy to install by drilling 1’’ holes in airbox housing and snap fitting vents in.
  • May be cleaned and re-oiled
  • More air flow allows you to add more fuel to your intake mixture, increasing performance.
  • 1" Diameter

Not legal for use on pollution controlled vehicles in the state of California.

Ships same business day
$14.95
Universal fit. May require additional adjustment or modification.

Quick release one-piece clamps that saves space. These are great for fuel lines, controlling wires, and can be used many times.

Comes with 4 each of 8mm, 9mm 10mm, and 12mm.

No special tools needed, from Helix Racing.

Ships in 3-5 business days
$9.95

Gas Tanks

Universal fit. May require additional adjustment or modification.

TechSpec’s Motorcycle Tank Grips were developed to improve body, bike control and increase riders comfort. Gripping your motorcycle between your knees or thighs improves overall control of your ride by better securing your body weight and seat position under the forces of braking, cornering and acceleration while also relieving pressure from your wrists, elbows, shoulders and lower back giving you increased control and a more comfortable, safer ride. Snake Skin is a thin, .125” medium durometer “rubber” material that offers a secure, comfortable grip, durable protection and a clean stock look.

This universal precut kit includes left and right tank grips. (8" X 3") Triangle

Ships same business day
$29.95
V-Strom (DL650) '00 - '11

TechSpec's line of motorcycle tank grip pads will help you improve the relationship between you and your machine! The ability to squeeze the tank and feel a solid seat position is very comforting. Hard braking maneuvers no longer send you into the tank.

The Snake Skin material is their 'Premier Product' at just .125" thin. This precut kit includes five pieces: right & left tank grips, right and left frame panel pieces, and a center tank piece.

Choose Model and Year
Please contact us for availability information
$79.95
Universal fit. May require additional adjustment or modification.

If you're like us, you hate the long floppy vent hose hanging off the cap of your aftermarket tank.

This one-way vent cap replaces the long hose with a short one only about 2" long. It allows air into your tank but prevents fuel from sloshing out.

Machined from billet alloy and anodized for good looks.

  Not for stock fuel tanks!

Ships same business day
$11.95
Universal fit. May require additional adjustment or modification.

Security for your fuel tank. Includes 2 keys. Internally vented with a check valve that prevents spillage in case of a tip over.

  Fits Acerbis, IMS and Safari tanks only.

Ships same business day
$39.95
Universal fit. May require additional adjustment or modification.

The small size and right angle hose barbs make this filter easier to fit into the small space between your fuel petcock and carburetor. Filter body is only 7/8" diameter. Straight filter is 2" long, 90 degree filter is only 1-5/8" long.

Choose Type
Ships same business day
$24.95
Universal fit. May require additional adjustment or modification.

This filter is meant for 5/16" fuel lines. Only 1/2" thick it is small enough to fit just about anywhere.

Choose Pack
Ships same business day
$24.95
Universal fit. May require additional adjustment or modification.

Fuel supplies can be sketchy at times. This filter lives in your tank to trap dirt and debris as it is poured into the tank. Features a custom shaped adapter that fits securely under the gas cap, creating a leak-proof seal. If it stays out of your fuel, it can't get into the carburetor! Created by the filter experts at Twin Air, this filter fits IMS,  Acerbis and Safari brand gas tanks.

Choose Tank Type
Ships same business day
$35.95
Universal fit. May require additional adjustment or modification.

Ordering new fuel line? How about a set of fresh zinc plated clamps to go with it?

These will be sure your fuel line stays connected. A pack of 8 clamps in 2 sizes to fit most 1/4 or 5/16 fuel hose.

Ships same business day
$5.95
Universal fit. May require additional adjustment or modification.

Hose reducer to go from 5/16" line down to 1/4" line. Many bikes have 5/16" carburetor spigots but most aftermarket petcocks are 1/4". This solve the problem of mismatched sizes. Solid brass construction. Can be used to route or repair fuel lines, oil lines or air lines. Barbed ends provide a secure fit.

Ships same business day
$8.95
Universal fit. May require additional adjustment or modification.

All of these lines are stronger and more durable than vinyl fuel lines and are resistant to swelling, UV light, as well as hardening and cracking.

Five-layer Greenshield® Barrier Technology cuts vapor loss and saves fuel, making it safe for the environment and fuel efficient.

1. Barrier tube - provides high heat and corrosive liquid resistance.
2. Greenshield® barrier - patent-pending technology provides the lowest permeation in the industry.
3. Adhesion layer - secondary protective barrier.
4. Reinforcement layer - spiral textile reinforcement provide strength and pressure resistance.
5. Cover - protect underlying components.

  • 30" length, 1/4" ID
  • Temperature Range: -40°C to +125°C (-40°F to +257°F).
  • HNBR tube with thermoplastic barrier and CPE cover; reinforced aramid fiber.
  • Oil, heat, ozone, and abrasion-resistant cover.
  • Multi-fuel compatibility. Unleaded gasoline, methanol, ethanol (E10, E15, E85)
  • PSI rating: 35 to 50.
  • Not for use with fuel-injected models
Select Product
Ships same business day
$9.95
Universal fit. May require additional adjustment or modification.

All of these lines are stronger and more durable than vinyl fuel lines and are resistant to swelling, UV light, as well as hardening and cracking.

Five-layer Greenshield® Barrier Technology cuts vapor loss and saves fuel, making it safe for the environment and fuel efficient.

1. Barrier tube - provides high heat and corrosive liquid resistance.
2. Greenshield® barrier - patent-pending technology provides the lowest permeation in the industry.
3. Adhesion layer - secondary protective barrier.
4. Reinforcement layer - spiral textile reinforcement provide strength and pressure resistance.
5. Cover - protect underlying components.

  • 30" length, 5/16" ID
  • Temperature Range: -40°C to +125°C (-40°F to +257°F).
  • HNBR tube with thermoplastic barrier and CPE cover; reinforced aramid fiber.
  • Oil, heat, ozone, and abrasion-resistant cover.
  • Multi-fuel compatibility. Unleaded gasoline, methanol, ethanol (E10, E15, E85)
  • PSI rating: 35 to 50.
  • Not for use with fuel-injected models
Choose Size & Type
Ships same business day
$9.95
Universal fit. May require additional adjustment or modification.

Need to mount two containers? A water and a fuel? Two waters? Already have a RotoPax Mount for a single container? Get this extender to work in conjunction with a pack mount and that will be no problem! Single mount, two containers.

Ships in 3-5 business days
$43.95
Universal fit. May require additional adjustment or modification.

RotoPax holder made to mount a single Fuel and/or Water container.

Need to mount two containers? A water and a fuel? Two waters? Get the extender which allows you to stack two containers no problem! Single mount, two containers

Add Extension Mount
Ships same business day
$52.95
Universal fit. May require additional adjustment or modification.

RotoPax holder made to mount a single Fuel and/or Water container.

This unique design adds strength and provides extra tightening power.

Use with included base plate or remove plate to attach mount direct by bolting up through the bottom or down through the top.

Ships same business day
$62.95
Universal fit. May require additional adjustment or modification.

RotoPax are Rotational Molded - the process which produces indisputably superior products.

  • Thicker walls and stronger construction
  • Bright colors that are less prone to fading
  • Extra threads, thicker walls, and sure-seal gasket guarantee no leaks

Need to mount two containers? A water and a fuel? Two waters? Finally, you can stack multiple packs together! Use in conjunction with a pack mount. You will need to purchase the Single Mount as well as the Extender.

Choose Container
Add Container Mount
Add Extension Mount
Ships same business day
$87.95
Universal fit. May require additional adjustment or modification.

Auxiliary fuel tanks mount to handlebars, forks, or rear racks.

  • Suitable for minis, trials bikes, full size bikes, and anywhere else a little extra fuel is needed.
  • Each tank includes a siphon kit that connects the tank to the main fuel tank and automatically siphons fuel while the bike is being ridden.
  • With this design, the auxiliary tank empties first, before the main tank.
  • Does not interfere with headlight, handguards, rear seat, etc.
Add Fuel Stabilizer
Ships in 3-5 business days
$112.95
Universal fit. May require additional adjustment or modification.

This Super Siphon has  a (1/2 inch x 6 foot) long hose, which makes it quite easy to transfer fuel from one bike to another! Simply, shake the hose to prime it and get fuel moving. The hose is resistant to gasoline and any other hazardous chemicals. Roll it up, stuff it in your bag and you will be very happy whenever you need it.

Ships same business day
$22.95

Controls

Universal fit. May require additional adjustment or modification.

Comfortable Oversize (or Fat Bar) Handlebars.

  • Silver in color. 
  • Constructed of high-quality 7065-T6 aluminum
  • Lighter and stronger than regular bars
  • No-crossbrace allows flex to reduce shock and rider fatigue
  • Oversize 1-1/8" diameter base reduces to 7/8" to allow standard-size controls/grips
  • Etched alignment marks for fast and accurate positioning
  • Flex Series pad included
  • Works with stock controls and cables.

For bikes with factory 7/8" handlebars these will require the use of a 7/8 to 1-1/8  adapter (sold separate).

Ships same business day
$79.95
Universal fit. May require additional adjustment or modification.

These 7/8" bars fit in the stock clamps and raise your grips a couple inches. They look great too!

WidthHeightRise
813mm160mm104mm
Clamp AreaSweepControl Area
236mm100mm199mm
Backordered: Waiting for stock from suppliers to fulfill orders placed on or after June 2024
$74.95
Universal fit. May require additional adjustment or modification.
  • 4.75" wide,
  • Raises handlebars 2 inches and allows fore/aft position adjustment
  • Provides dual pivot points for optimal bar positioning
  • One piece design is made from solid aluminum for superior strength
  • Available for 7/8" - 7/8" or 7/8" - 1 1/8" bars

Requires 7/8" factory bar clamps on bike

Choose Bar Size
Ships same business day
$99.95
Universal fit. May require additional adjustment or modification.

These versatile Risers allow you to clamp a 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1- 1/8" aluminum "fatbar". If you are thinking of going to a fatbar after you bend your stock set or just want the versatility and option to run any bar, this is the riser to go with. Reducers lock into risers to insure no slippage between components.

These risers use 8mm bolts. Always check and confirm that your bike has adequate cable and brake line length before installing any handlebar risers.

Anti-Vibration Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations (in these cases we recommend using standard pivoting risers).

Choose Color
Ships same business day
$171.95
Universal fit. May require additional adjustment or modification.

This unique design from Rox allows you to move your bars either closer (1" up and back) or further away (1" forward and 1-1/4" up) depending on rider preference. These risers have an oblong mounting hole so that they will fit virtually any triple clamp with 8mm bolts. A set of reducers lock into the risers ensuring no slippage whether you have a 7/8" or 1-1/8" bars.

Because these are offset there may be limited clearance between the gas tank and the risers when the bars are fully turned on some models, mainly when mounted to move the bars closer.

Choose Color
Ships same business day
$99.95
Universal fit. May require additional adjustment or modification.
  • Adapt 7/8" bar mounts to accept oversized 1-1/8" handlebars
  • An economical alternative to replacing expensive top triple clamps
  • Include mounting bolts.
  • Raises handlebar 20mm.
  • Polished aluminum
Ships same business day
$49.95
Universal fit. May require additional adjustment or modification.

Protect your thumbs from blisters caused by riding on the inside of your grips.

Sold in Pairs.

Ships same business day
$4.95
Universal fit. May require additional adjustment or modification.

ProTaper Pillow Top Grip with 3-D (Tri-Density) Technology.  Try the grip with the technical advantage of three dedicated rubber compounds.

The difference between the original Pillow Top and the Pillow Top Lite is the overall diameter of the grip surface. The Lite offers a smaller diameter so the grips don't feel as large reducing fatigue in your hands while riding.

  • Vibrasonix pillow top reduces vibration and cushions impact. 
  • Inner core compound perfects the bonding interface with bars. 
  • Anti-Rip Tip™ uses denser compound to increase life of grip. 
  • Designed to self-clean and shed mud away from outer surface. 
  • Tacky gel-like surface compound is perfect for the trail and MX.
Add Grip Glue
Backordered: Waiting for stock from suppliers to fulfill orders placed on or after April 2024
$13.95
Universal fit. May require additional adjustment or modification.

ProTaper Pillow Top Grip with 3-D (Tri-Density) Technology.  Try the grip with the technical advantage of three dedicated rubber compounds.

  • Vibrasonix pillow top reduces vibration and cushions impact. 
  • Inner core compound perfects the bonding interface with bars. 
  • Anti-Rip Tip™ uses denser compound to increase life of grip. 
  • Designed to self-clean and shed mud away from outer surface. 
  • Tacky gel-like surface compound is perfect for the trail and MX.
Add Grip Glue
Backordered: Waiting for stock from suppliers to fulfill orders placed on or after June 2024
$13.95
Universal fit. May require additional adjustment or modification.

Highly efficient design delivers warmth faster than traditional heated grips.

Choose from the standard five level push button temperature controller, or the LCD display controller which shows the selected heat level and available battery voltage.

Choose Controller
Ships in 3-5 business days
$66.95
Universal fit. May require additional adjustment or modification.

These heated grips from Koso have been tested by us and we can say they will keep your hands warm and give you the grip you need in off road conditions, thanks to the full diamond grip design.

  • Clamp-on grips do not need adhesive
  • External temperature controller with 5 heat levels
  • For use with twist throttle; includes interchangeable throttle cams
  • Requires 35W and draws 2.5 amps per pair; low voltage shut off
Ships in 3-5 business days
$155.95
Universal fit. May require additional adjustment or modification.

The Apollo Heated Grips are designed with an integrated adjustable thumb switch, which allows them to easily fit on any kind of motorcycles on the market. The integrated thumb switch gives control to the rider to adjust the temperature level while keeping hands on the bar for a safer ride.

Its wide temperature setting range will keep the rider comfortable under the cold riding conditions.

The 5 color LED display will enhance the visual look of the heated grips and will allow the rider to quickly know at which heat level the grips are set.

This system will also detect if the battery voltage is too low and will automatically shut down the heated grips in order to make sure the rider have enough power to start the engine or use the motorcycle.

Specifications:

  • Integrated thumb switch designed for easy installation and control.
  • “Plug & Play” wiring connections to shorten the installation time.
  • Wide temperature settings for various weather conditions.
  • Low Battery Warning protection to ensure the motorcycle has enough power to start.
  • 5 color LED Indicators for the rider to quickly know in which heat level the grips are set.
Ships same business day
$144.95
Universal fit. May require additional adjustment or modification.

These new heated devices are for the user that does not want to commit to changing their grips but still wants to maintain the comfort of heated grips. The fitment is intended to fit all sorts of handlebar sizes. They can be installed and removed in a matter of seconds and kept in any sport bag when not in use.

Features:

  • Universal fit to be clipped on any handlebar sizes
  • Rubber material that is resistant to outdoor conditions and high temperatures
  • Thin and flexible silicone wires make them easy to install
Ships in 3-5 business days
$93.95
Universal fit. May require additional adjustment or modification.
  • Ergonomically designed
  • Medium-density Thermoplastic Rubber (TPR) compound provides excellent feedback and control, without sacrificing durability
  • Full diamond pattern for an unparalleled feel in both wet and dry conditions
  • Inner diameter optimized to keep grips secure in any conditions
  • 115mm overall length; fit 7/8" bars and throttle sleeves
Ships same business day
$10.95
Universal fit. May require additional adjustment or modification.

These grips feature a thicker design that dampens vibration. The soft shoulder allows ease of movement. Three wire-tie grooves are molded into the grip to make securing them a breeze. We think they are great!

Add Grip Glue
Ships same business day
$12.95
Universal fit. May require additional adjustment or modification.

Each pattern is available in three advanced synthetic rubber compounds. This means you can have the optimum combination of strength, tackiness and shock absorption to suit every riding condition and individual style. Soft grip is extremely soft, giving you a very comfortable ride, great feel and reduces the chance of blisters; however, because the grip is so soft, it wears quickly. Medium is a compromise between firm and soft. Firm grip has the same feel as a stock grip, it is very strong and has very good resistance to tearing and abrasion. Half Waffle has waffle pattern in finger area for traction and diamond pattern on palm side to reduce blisters. Full Waffle: designed after the CR Honda® grip.

Add Grip Glue
Please contact us for availability information
$16.95
Universal fit. May require additional adjustment or modification.
  • Feature the classic Vans waffle sole pattern with a subtle domed center section for improved ergonomics and vibration dampening
  • 125mm in length
  • Fit 7/8" bars
  • Sold in pairs
Add Grip Glue
Ships same business day
$19.95
Universal fit. May require additional adjustment or modification.

This little jewel reduces hand fatigue and cramping on long rides or daily commutes. The Crampbuster is not a throttle locking unit but, rather a simple clip-on device which allows you to relax your grip while riding.

Ships same business day
$10.95
Universal fit. May require additional adjustment or modification.

The Go Cruise cruise control mounts over the throttle grip and rests on the brake lever to hold your throttle open, allowing you to stretch and rest your hand on long rides. Installs and removes in seconds with no tools. You can roll off the throttle manually to disengage the Go Cruise.

Ships same business day
$19.95
V-Strom (DL650) '04 - '12

The MAGURA HYMEC hydraulic clutch system gives you an ease and smoothness of pull that cannot be equaled by a cable unit. No need to lube the cable, no more broken cables. The HYMEC is simply a fantastic hydraulic retrofit clutch system. You will be able to get away with applying a lot less pressure than with a standard cable clutch. Depending on riding style, this can make for huge benefits in terms of riding comfort and control. The master cylinder control naturally has reach adjustment.

The advantages of the MAGURA hydraulic clutch are many:

  • Forged lever with improved lever ergonomics
  • Filled and delivered ready to install
  • Easy to install, detailed instructions included
  • Less energy required
  • Fine response
  • Finely tuned metering capability
  • No fluctuation in the pressure point
  • Maintenance free
  • First class workmanship-"Made in Germany"

MAGURA favors use of their 'MAGURA Blood' for its clutch systems. Mineral oil is non-toxic and not hygroscopic. Regular changes of the clutch fluid are not required.

Please contact us for availability information
$329.95
Universal fit. May require additional adjustment or modification.

Attach this over your brake lever and hand grip, squeeze the brake lever, pull the locking bar in and lock the black portion down. This creates a locked front brake, making parking safe and secure with about 5 seconds of effort.

To unlock the BrakeFix, you just lift the back of the black hooking portion to release it. This takes about 2 seconds. Perfect for use with Snapjack type stands or just parking on an incline.

Ships same business day
$19.95
Universal fit. May require additional adjustment or modification.
  • Handy, compact kit for on-the-go emergency throttle, clutch and brake cable repairs
  • Includes 2 different diameter 6.5 long inner cables and an assortment of cable ends
Ships same business day
$19.95
Universal fit. May require additional adjustment or modification.

Sold individually.

The Adventure Kit is perfect for adventure and touring bikes where the mirrors are kept up most of the time. This mirror offers the widest field of view, and is ideal for riding paved and dirt roads.  The 6 inch arm is a little longer than anything else on the market, for great visibility on loaded bikes.

  • Made from super tough glass reinforced zytel
  • Reflector Dimensions: 5.25" x 3.5" (135mm x 95mm) 
  • Overall mirror length: 7" (175mm) (not including arm mount)
  • Convex lens meets SAE and CE specifications 
  • Mirror mounts to any 10mm perch.

The new Doubletake ball is oversized, and high quality nitrile rubber surrounds an aluminum base that won't degrade under extended compression. 

The Doubletake Base Kit includes bolts to thread into every application (even reverse thread Yamaha's), without adapters. 

ADV 6" Arm Mirror 

Kit Includes: 

  • 1 Adventure Mirror
  • 1 6" arm
  • 1 Ball Stud
  • 3 Adapters (1Base Extension, 1 Reverse-Thread Adapter, 1 BMW Adapter)
Choose Style
Ships same business day
$71.95
Universal fit. May require additional adjustment or modification.

Sold individually.

Enduro Mirror 4"

The Enduro Kit is a great option for your street legal dirtbike if you fold away your mirrors often. The longer stem helps the reflector fold behind the headlight and gives good visibility when extended. 

  • Made from super tough glass reinforced Zytel.
  • Reflector diameter: 4" (100mm)
  • Overall mirror length 8.25" (215mm) (not including arm mount)
  • Convex lens meets SAE and CE specifications

Their Doubletake Arm 3.5" is perfect for aggressive riders- long enough to see, but small enough to tuck away.

The new Doubletake ball is oversized, and high quality nitrile rubber surrounds an aluminum base that won't degrade under extended compression. 

The Doubletake Base Kit includes bolts to thread into every application (even reverse thread Yamaha's), without adapters. 

Choose Style
Ships same business day
$62.95
Universal fit. May require additional adjustment or modification.

Can't see past your shoulders? These mirror extenders will get your mirrors higher and farther out for a much better view of the road behind you.

  • Aluminum extension with Japanese 10mm x 1.25 male and female threads
  • Works with standard Ball Stud Base to offer clearance in some applications
  • Torque spec: 5 Nm
  • Sold in pairs
Choose Length
Ships same business day
$12.95
Universal fit. May require additional adjustment or modification.

Replaces all 2 bolt style clutch/brake lever mount clamps on your clutch or brake lever holder. Can help save space on short bend handlebars.

Ships same business day
$24.95
Universal fit. May require additional adjustment or modification.

With the split back, you don't need to remove your grip or throttle tube, just put it on and tighten 'er down. Put the mirror in and hit the road. Clean and simple.

Ships same business day
$11.95
Universal fit. May require additional adjustment or modification.

This new mirror can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price.

Fits either left or right side and includes handlebar mount.

Sold individually

Ships same business day
$29.95
Universal fit. May require additional adjustment or modification.

This new mirror screws into your stock mirror mount but can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price. Fits either left or right side.

Sold individually. If a set is needed, order two.

  All Yamaha's will need a mirror adapter if you have the stock perch.

Ships same business day
$22.95
Universal fit. May require additional adjustment or modification.

PSR dual sport mirrors come with a slightly convex mirror for a wider field of vision behind you. The round mirror is 4.25" in diameter while the oval is 3.75" x 3". These mirrors are easily adjustable and fold out of the way quickly with the 1" RAM mounts.

The RAM Ball Stud Base used for both mirrors will go into any standard 10x1.25 threaded mirror base.

Sold individually. If you need a set, please order 2.

 All Yamaha's will need a mirror adapter if you have the stock perch.

Choose Mirror Shape
Ships same business day
$64.95
Universal fit. May require additional adjustment or modification.

Just two inches in diameter, this is the smallest mirror available. Perfect for bikes meeting legal requirements for street legal rules. Simply zip-tie the mirror to your handlebars out of the way of brush and protected from crashes.

Sold individually

Ships same business day
$24.95
Universal fit. May require additional adjustment or modification.

Bar end mounted mirrors move the mirrors out past your elbows so you can actually see what is behind you. They can mount with or without hand guards.

Sold in Pairs

Backordered: Waiting for stock from suppliers to fulfill orders placed on or after April 2024
$64.95
Universal fit. May require additional adjustment or modification.

Keep your cables lubed up and working freely, with Motion Pro's Cable Luber. This tool is used to inject lubricant into any cable housing. Clamps over housing and cable allowing an aerosol can with nozzle to be connected. Once the lubrication solution runs out the far end, the cable is lubricated.

Add Cable Lubricant
Ships same business day
$10.95
Universal fit. May require additional adjustment or modification.

Designed to seal completely around the cable housing and stop all those messy leaks. With the unit closed and sealed around the cable, your cable gets better lubrication and you waste less lubricant.

  • Works on most cables with a 4mm - 8mm O.D. housing.
Add Cable Lubricant
Ships same business day
$23.95

Electrical

V-Strom (DL650) '04 - '11 V-Strom (DL650) '12 - '25

Built with the latest in Lithium Ion Polymer Technology. All components are designed, manufactured, assembled and packed in one location assuring high quality and consistency. Besides extreme lightweight (50% to 70% lighter than standard lead-acid batteries) it also features a built-in LED test gauge and the ability to mount it in any position.

The Firepower features increased cranking amps over lead acid batteries and has a very fast recharge cycle, and can be brought up to a 90% charge within 6 minutes. It also has 6 to 12 times more cycle life when compared to lead acid batteries. A 2-year warranty insures that your investment is protected.

220 CCA 12V/48WH
Package Dimensions: 6.20 x 3.70 x 5.25

Ships in 3-5 business days
$167.95
V-Strom (DL650) '04 - '25

Shorai batteries deliver more energy faster, with less weight and with less wear on the battery per start cycle than any other brand or technology available on the market today.

  • Up to 80 percent lighter than their lead acid equivalents
  • Improved starting performance
  • Does not sulfate while sitting
  • Three year warranty

19AH 12V, "A" polarity, Length 5.83" Width 3.39" Height 3.46" 

Add Shorai Charger
Ships same business day
$219.95
V-Strom (DL650) '04 - '25

Antigravity Batteries introduce the ground-breaking "RE-START (RS)" line of batteries. These are the first batteries with built-in jump starting! They intelligently monitor their status, and just before going completely dead, puts itself to sleep with just enough energy to get your vehicle started again. Simply press the RE-START button located on the battery, then start your bike and ride away!

These are an extremely lightweight (2.3 lbs.) and high-powered Lithium-Ion replacement battery for motorcycles. These batteries offer the first Battery Management System (BMS) found on a powersport battery and includes low-voltage cut-off, over discharge, over-charge, and thermal protections with real time lithium-ion cell balancing. Highly recommend using a lithium charger to maintain the life of the battery.

3 Year warranty

Product Size is just 5.9"L x 3.5"W x 3.74"H. If you need spacers, select the optional Foam Kit to pad the battery in the battery box.

Add Foam to Fit in Battery Box.
Ships in 3-5 business days
$249.95
Universal fit. May require additional adjustment or modification.

This is an adhesive-backed foam kit, for the installation of small batteries into larger battery tray areas. Keep in mind that all Antigravity Small Case Batteries DO come with adhesive-backed foam in the box. This kit is for when you need extra foam or are doing installation in another vehicle.

Features

  • Hi Density adhesive backed foam
  • Help reduce vibration
  • Easily cuts with scissors or razor knife
  • 3 pieces of 6″ x 3″ x 0.5″ adhesive-backed foam
Ships same business day
$9.95
Universal fit. May require additional adjustment or modification.

This is the Restart-Remote for Antigravity RE-START (RS) Powersport Batteries with jump-starting built-in. You no longer need to access the battery to press its Re-Start button in the event you over-discharged the battery. Simply plug this accessory into your Battery’s Charging Cable to remotely awaken the RE-START Battery! No need to remove the seat or a fairing to get to the Battery.

  • Compatible with Antigravity RE-START Powersport Batteries
  • Plugs into SAE Tip of your existing battery charging cable
  • Comes with protective zipper case
  • Remote requires 9v battery (not included)
  • Not compatible with Automotive Batteries
Ships same business day
$19.95
Universal fit. May require additional adjustment or modification.

The LITHIUM US is an advanced microprocessor-controlled charger specially designed to recharge and maintain the cells of Lithium-Iron (LiFePO4)  batteries – maximizing their performance and lifespan. With up to 4.3A of charge current available the LITHIUM US is extremely flexible and will charge LiFePO4 batteries from 5Ah to 60Ah and maintain up to 120Ah.

The operation is simple and charging will commence upon connection. With no need to disconnect the battery from the vehicle, the LITHIUM US will automatically reset any low voltage protection electronics (Battery Management System) fitted. Charging can be restarted manually at any time using the ‘Reset’ button.

The CTEK LITHIUM US is a fully automatic ‘connect and forget’ charger with 8 charging steps including a testing sequence to show if the LiFePO4 battery can take and retain the charge, a unique maximization step to restore full capacity, and patented maintenance charging to ensure maximum performance even after months of inactivity. Splash-proof and dust-proof (IP65) the LITHIUM US is easy and safe to use, protects vehicle electronics, is spark-free, is reverse polarity protected and short circuit proof. The LITHIUM US features a 5-year warranty.

The CTEK Brand of chargers is recommended for all Antigravity RE-START (RS) Batteries (models with built-in jump-starting and full BMS protections)

Ships in 3-5 business days
$151.95
Universal fit. May require additional adjustment or modification.

Optimate Lithium 0.8A

At 0.8A, it’s a lower amp charger but still charges or maintains All 12V LiFePO4 batteries, protecting and keeping the battery at 100% charge. A great, cost-effective charger for your lithium battery maintenance.

A unique LiFePO4-specific program recharges and balances cells within the battery efficiently and safely. BMS re-activates battery from sleep or deep discharge protection mode. Protects LiFePO4 batteries in the most effective way. Protects a large investment and guarantees Lithium Iron Phosphate (LiFePO4 / LFP) batteries will perform as advertised for a very long time. 

No risk of overcharging. Totally safe for vehicle electronics. Sparks suppressed. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected.

Please contact us for availability information
$74.95
Universal fit. May require additional adjustment or modification.

Optimate 1 Global Charger-Maintainer

This charger is perfect for 24 hour, 7 days a week, 365 days a year smart battery maintenance. It delivers precise microprocessor controlled charging and long term maintenance. 

Maintain any type of 12 volt lead-acid (STD, AGM, GEL) and 12.8V/13.2V Lithium (LFP) Non-RS/Non-BMS batteries without overcharging. Ideal for vehicles that are seldom or seasonally used, or kept in storage. 

Global Three-step charging program ensures effective charging of the battery and is safe for prolonged connection to the battery, without risk of overcharging. Automatic shut-down if short-circuited or if battery is disconnected. 

Dust proof case with wall mounts and 6ft AC supply lead and 6 ft charge lead ending in SAE connector. Weatherproof battery lead & OptiMate battery clip set included.

Please contact us for availability information
$48.95
Universal fit. May require additional adjustment or modification.

The Battery Tender® Junior Selectable is much more than a trickle charger. It has a brain. It's lightweight, compact, and fully automatic; very easy to use, especially in small spaces. It will keep your Lead Acid, AGM or Lithium battery fully charged so that it is ready to go when you are

  • Output: 12v @ 800mA
  • Selectable Battery Chemistry- has battery chemistry selection with proper charge algorithm for lead-acid, flooded or sealed maintenance free (AGM and gel cell), and Lithium Non-RS/Non-BMS batteries
  • Complete 4-step charging program (Initialization, Bulk Charge, Absorption Mode, Float Mode)
  • Automatically switches to float/maintenance voltage after fully charging the battery
  • If the battery voltage drops too far under load, full charger output power resumes
  • Solid state two color LED indicates stage of charger
  • Spark proof, reverse polarity protected
  • 12' output cord
  • Meets California and Oregon appliance energy efficiency standards for battery charging systems
  • 5 year warranty
Ships same business day
$46.95
Universal fit. May require additional adjustment or modification.

Spare Extension Cable Set for Shorai 12V LFX battery charger.

Please contact us for availability information
$17.95
Universal fit. May require additional adjustment or modification.

Charges and maintains all 12 volt lead acid, gel and lithium iron phosphate (LiFePO4)/lithium ion polymer Non-RS/Non-BMS powersport batteries

Features:

  • CONSTANT CURRENT CHARGE - If the battery voltage is over 10 volts, the charger will deliver a 2 amp charge until the battery reaches 14.2 volts.
  • MAINTENANCE CHARGE - When the battery reaches 14.2 volts, the charger will automatically convert to maintenance mode. The charger will revert to charge mode when the voltage drops below a specified voltage.
  • LOW VOLTAGE RECOVERY - If battery voltage is below 8 volts, the charger will apply a .2 amp charge to recover the battery, once the battery reaches 8 volts, the charger will apply a .5 amp charge, at 10 volts a full 2 amp charge is applied until the battery is fully charged.
  • AUTOMATIC VERIFICATION STAGE - Charger automatically stops charging if the battery does not reach at least 10 volts after 2 hours of charging.
  • SAFETY - Power is not passed thru the charging leads unless they are connected to a battery.
  • LED indicator light shows charging status.
  • Includes heavy duty clamps and fused ring terminal SAE adapter.
Ships in 3-5 business days
$69.95
Universal fit. May require additional adjustment or modification.

You can charge your Shorai battery with a regular battery charger but, if you want the very best for it this charger is designed for optimum performance by balancing the individual cells in the battery. Balanced charging ensures the battery reaches its fullest capacity and longest life. 'Store' mode allows long term maintenance storage.

Shorai Charge/Store Dedicated Battery Management System for Shorai LFX only. 2A Max charge rate, connects via BMS 5-pin port on LFX batteries. Includes modes for full charge, or long-term storage. Input USA 110~120V 50/60 Hz.

  For Shorai Lithium Iron batteries only

Ships same business day
$96.95
Universal fit. May require additional adjustment or modification.

A portable device that can jump-start your motorcycle or car. It can also charge your cell phone, GPS unit, laptop or other electronic devices via USB cable.

  • XP-1 is 6" x 2 7/8" x1" 14oz.
  • XP-3 is 5" x 2 7/8" x 1" 12oz.
  • Holds a charge for up to 1 year.
Choose Type
Ships same business day
$159.95
Universal fit. May require additional adjustment or modification.

GET JumpStarter Mini, the second-generation, multifunctional jump starter. Now lighter and smaller, it's ready to help you restart any motorcycle or scooter when the battery is low. You can also use the powerful built-in LED flashlight or charge your use it as a power bank to charge your electronic devices. JumpStarter Mini comes together with a hard, water-resistant case perfect for carrying it anywhere and protecting it on your journeys.

  • Light and compact multifunctional mini starter
  • Allows restart of motorcycles and scooters when they are out of battery
  • Can also be used as a Power Bank for electric devices thanks to the USB output port
  • USB 5V2.4A output allows connection to tablets, smartphones, MP3 etc.
  • Has built-in LED flashlight
  • Easy to use; provides special protection against overvoltage and inversion of power supply polarity
  • Start current: 200A, peak current: 400A, operating temperature range of -20°C to 60°C
  • Includes JumpStarter, Smart Cable, 3-in1 USB cable and user instructions
  • Measures 155 mm x 79 mm x 16 mm
Ships in 3-5 business days
$79.95
Universal fit. May require additional adjustment or modification.
  • Optional plastic dashboard with indicator lights protects the computer and places it in an optimum viewing position
  • Included mounting bracket installs easily to the triple clamp on most motorcycles
  • Includes an assortment of indicator light lenses allowing customization to fit your needs
  • For use with Trail Tech Vapor Speedometer/ Tachometer (sold separately)
Please contact us for availability information
$69.95
Universal fit. May require additional adjustment or modification.
  • Mini Speedometer is only 2 inches diameter.
  • Works with Japanese speedometer or odometer cables.
  • Mounts to handlebar bolt or use the bar clamp supplied.
  • Illuminated dial for night riding.
  • Smaller, lighter and more accurate than the stock unit.
Ships same business day
$51.95
V-Strom (DL650) '04 - '11

A handy shelf laser cut from 16 gauge steel to mount your radar detector, switches or other small accessories for easy viewing access. Does not interfere with the riders view of the instrument panel and in fact does double duty as a shield to keep damaging UV rays off the plastic instrument panel.

This shelf is black powder coated for a clean look and additional durability. Mounts simply to stock or MadStad Bracket and compatible with all wind screens.

Ships same business day
$35.95