Available in unisex Black and Charcoal Gray. These have our logo on the front left shoulder and on the back, with our tag line "Back Roads or No Roads" down the right sleeve in Yellow.
While Supplies Last - Purchase a Wall Calendar and receive a Desk Top Calendar FREE!
Calendars are in stock now. Get yours before we run out!
We have two sizes available. The desktop calendar is the perfect size (6" by 3.75") to sit on your desk.
The wall calendar is 11" by 17" when fully open for use on your wall or next to your desk.
Use them at the office or in your home to remind yourself of where you would really like to be, and doing what you really love the most - riding your bike!
Saddlemen's Destination Pack secures your valuables within a steel wire mesh sandwiched between a scratch-free, soft inner liner and a tough water resistant nylon outer bag to provide vault-like protection. A velvet smooth inner liner protects your cargo while a six-foot-long flexible stainless steel cable secures the bag to the bike or other permanent structure. (Padlock not included.) The cable doubles as a motorcycle security cable - prevents theft of bag or bike. 12 x 24 with a 44 liter capacity.
Limited Quantities Left! Grab yours now while supplies last.
Includes degree wheel, dial-gauge, multi-position stand, extension, 3-sizes of positive-piston stops, and a handsome wooden carrying case.
Made from medium carbon steel with hardened jaws. It features spanner pins and the jaws open up to 5" wide. It's ideal for holding clutch hubs, flywheels, gears, sprockets, etc. Made by Motion Pro.
This tool is designed to separate vertically split crank case halves on two and four stroke engines. Adjustable arms allow it to be used on multiple bolt patterns found on a variety of makes and models of motorcycles. Industrial grade steel construction with black oxide finish for long service life. Comes with 8mm mounting bolts and 6mm adapters. Protective carrying case included.
For easy removal of recessed oil filters.
Conical point screws pierces and grabs the metal end cap of the filter.
reduces potential damage to the engine cases.
NOT for use on re-usable oil filters.
A 3-pack of easy to apply strips measure the temperature of engine, suspension, and radiator components. Temperature range 146° to 248°
Thread Chasers are designed to clean and re-cut damaged aluminum threads.
this kit contains the two sizes most common on metric motorcycles, M6x1.0 and M8x1.25.
Thread Chasers also remove dirt and metal shavings that become captured in thread grooves.
Uses 8mm or 10mm hex sockets, a Must for all tool kits.
Dual marked feeler gauges. 32 blades from .03mm/.001" to 1mm/.040"
Fuel and Intake
Sold in 6 packs
- Compatible with many air filter boxes.
- More air flow allows you to add more fuel to your intake mixture, increasing performance.
This canister by Pro Circuit allows you to move the overflow tubes from the carburetor up and out of the way. Universal application.
Become more visible and look cool while doing it. The ProCycle Natural Tank LED Light Kit will add more light to your bike with the push of a button.
Kit includes a handle bar mounted lighted switch, two 12" LED light strips with adhesive backing, four saddle splice connectors, and a center harness for connecting to your bikes harness.
Installation is quick and easy. More colors/images coming soon. *Please note All colors other than amber and white are recommended for off road use only*
The small size and right angle hose barbs make this filter easier to fit into the small space between your fuel petcock and carburetor. Filter body is only 7/8" diameter. Straight filter is 2" long, 90 degree filter is only 1-5/8" long.
This filter is meant for 5/16" fuel lines. Only 1/2" thick it is small enough to fit just about anywhere.
Fuel supplies can be sketchy at times. This filter lives in your tank to trap dirt and debris as it is poured into the tank. Features a custom shaped adapter that fits securely under the gas cap, creating a leak-proof seal. If it stays out of your fuel, it can't get into the carburetor! Created by the filter experts at Twin Air, this filter fits IMS, Acerbis and Safari brand gas tanks.
Ordering new fuel line? How about a set of fresh zinc plated clamps to go with it?
These will be sure your fuel line stays connected. A pack of 8 clamps in 2 sizes to fit most 1/4 or 5/16 fuel hose.
Hose reducer to go from 5/16" line down to 1/4" line. Many bikes have 5/16" carburetor spigots but most aftermarket petcocks are 1/4". This solve the problem of mismatched sizes. Solid brass construction. Can be used to route or repair fuel lines, oil lines or air lines. Barbed ends provide a secure fit.
30" lengths. Sizes shown are ID. All of these lines are stronger and more durable than vinyl fuel lines and are resistant to swelling, UV light, as well as hardening and cracking.
Auxiliary fuel tanks mount to handlebars, forks, or rear racks.
- Suitable for minis, trials bikes, full size bikes, and anywhere else a little extra fuel is needed.
- Each tank includes a siphon kit that connects the tank to the main fuel tank and automatically siphons fuel while the bike is being ridden.
- With this design, the auxiliary tank empties first, before the main tank.
- Does not interfere with headlight, handguards, rear seat, etc.
Giant Loop's Gas Bag Fuel Safe Bladder conveniently transports 1 gallon of hydrocarbon fuel for power sports use in a collapsible welded film and ballistic nylon reinforced container that rolls up or packs flat when empty, weighing less than 1 pound.
The Gas Bag Fuel Safe Bladder Kit includes 2 pairs of Giant Loop's adventure proof 26" Pronghorn Straps plus a 3-Pack of Fast Funnel Disposable Fuel Funnels.
Each Gas Bag Fuel Safe Bladder is individually pressure tested and made in USA by Fuel Safe, a leading fuel containment manufacturer based in Oregon.
- Volume: 1 gallon maximum capacity (3.8 liters).
- Empty weight: 11.5 oz.
- Dimensions (flat and unfilled): 19.5" long x 9.5" wide. Rolled diameter (empty): approximately 4".
- Filler neck is standard size, fitting "universal" spouts.
- Materials & Construction: Welded film bladder sewn into ballistic nylon sleeve with webbing daisy chain anchor points and handles.
Replace the original child-proof cap for your 30oz MSR Fuel Bottle with the Expedition-Style cap to allow easier transfer of fuel;
Allows pouring of fuel without full removal of cap. Not child-proof.
Extend your riding range with the MSR 30 oz. Motorcycle Fuel Bottle. Air-tight seal allows fuel to be stored longer by preventing air from entering and degrading fuel. Made from single-piece, impact-extruded aluminum to prevent leaks and cracks. Bolstered shoulder and base to resist bulging when pressurized.
Quality Fuel pack that's slightly larger than RotoPax 1 gal.
- New seven layer blow molded technology
- EPA and CARB approved
- Sleek, low profile design
- Versatile mounting capability
Note: Mount listed is a RotoPax mount that will fit the Open Trail Fuel Packs.
RotoPax are Rotational Molded - the process which produces indisputably superior products.
- Thicker walls and stronger construction
- Bright colors that are less prone to fading
- Extra threads, thicker walls, and sure-seal gasket guarantee no leaks
Need to mount two containers? A water and a fuel? Two waters? Finally, you can stack multiple packs together! Use in conjunction with a pack mount. You will need to purchase the Single Mount as well as the Extender.
RotoPax holder made to mount a single Fuel and/or Water container.
Need to mount two containers? A water and a fuel? Two waters? Get the extender which allows you to stack two containers no problem! Single mount, two containers
Need to mount two containers? A water and a fuel? Two waters? Already have a RotoPax Mount for a single container? Get this extender to work in conjunction with a pack mount and that will be no problem! Single mount, two containers.
If you're like us, you hate the long floppy vent hose hanging off the cap of your aftermarket tank. This one-way vent cap replaces the long hose with a short one only about 2" long. It allows air into your tank but prevents fuel from sloshing out. Machined from billet alloy and anodized for good looks.
Not for stock fuel tanks!
This Super Siphon has a (1/2 inch x 6 foot) long hose, which makes it quite easy to transfer fuel from one bike to another! Simply, shake the hose to prime it and get fuel moving. The hose is resistant to gasoline and any other hazardous chemicals. Roll it up, stuff it in your bag and you will be very happy whenever you need it.
Windscreen attaches to your bike's handlebars. Fully adjustable mounting brackets. Includes 7/8' handlebar clamps. 14" tall & 10" wide.
Will not fit 1 1/8" oversize handlebars.