Many suppliers are experiencing HUGE increases in demand and Covid related supply chain delays.

The quickest way to get your item is to place your order now which guarantees your place in line.

DR650: Controls

The Suzuki DR650 is a long-standing model in Suzuki's lineup, introduced in 1990 as a replacement for the DR600 model. The DR is a 644 cc, 4-stroke, single cylinder, SOHC, 4-valve, air/oil cooled dual-sport motorcycle with a counterbalanced engine that develops 36 horsepower. It has a 13 L fuel tank.

Chain Size:               Front Sprocket:                 Rear Sprocket:               Front Tire:               Rear Tire:                   Spark Plug:

520x114 ('90-'95)

525x110 ('96-Cur)

16T ('90-'95)

15T ('96-Cur)

42T ('90-'95)

42T ('96-Cur)

90/90-21 120/90-17

DPR9EA-9 ('90-'95)

CR10E ('96-Cur)

 

Controls

This kit is for those of you looking for a bit more leg and arm room in the DR cockpit. Included are ProCycle Low Foot Pegs and our oversize bars.

  • ProCycle Low Pegs will drop your pegs by 1-3/4" and include wider MX style pegs that are much more comfortable when standing.
  • These are not only taller bars, but 1-1/8" at the clamp area for additional strength. They taper down to 7/8" on the ends so all the stock controls fit. Black in color.
  • 1 1/8" Warp 9 clamps that raise the handlebar 1".
  • A new billet aluminum throttle tube is included.
Add Grip Glue
$314.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebar, Oversized Kit

DR650 '96 - '23

Here is a complete kit to install oversized tapered 1-1/8" handlebars on your DR650. Warp9 handlebar clamps bolt to your stock triple clamp adding an additional 1" to the height.

Alloy oversize bars offer more durability and eliminate the crossbar which opens up your dash area for more goodies. Black in color.

$99.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebars, ADV ProTaper

DR650 '96 - '23

ProTaper's ADV handlebars give you a bar taller than most with extra space on the control portion of the bar. These bars provide an additional 20mm of space next to where your levers and throttle are located for your GPS, phone cradle, auxiliary switches, etc . They come in Adventure (which is taller than stock) and Adventure High (which is even taller).

These  are oversize bars, which means they are are 1 1/8", not the smaller 7/8" diameter. Therefore some bikes will require a adapter and there are several available to select from.

Choose Bend
$99.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebars, Aero Fly Racing

Universal fit. May require additional adjustment or modification.

Comfortable Oversize (or Fat Bar) Handlebars. For bikes with standard 7/8" handlebars these will require the use of a 7/8 to 1-1/8  adapter. Black in color. Raise your bars and get rid of the crossbar that obstructs your view of the speedo. Works with stock controls and cables.

$79.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebars, SE ATV High ProTaper

Universal fit. May require additional adjustment or modification.

These 7/8" bars fit in the stock clamps and raise your grips a couple inches. They look great too!

  • Width 813mm
  • Height 160mm
  • Rise 104mm
  • Clamp Area 236mm
  • Sweep 100mm
  • Control Area 199mm

 

$69.95

Handlebars, SE Trials Bends ProTaper

Universal fit. May require additional adjustment or modification.

These 7/8" Silver bars fit in the stock clamps.

  • Width 815mm
  • Height 113mm
  • Rise 84mm
  • Clamp Area 173mm
  • Sweep 49mm
  • Control Area 206mm
$73.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Handlebar Riser Kit

DR650 '96 - '23

Mount these polished billet aluminum spacers under your handlebar clamps to raise your handlebars 1 inch. High quality longer bolts are included.

$34.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebar Riser, 2" Powermadd

Universal fit. May require additional adjustment or modification.
  • 4.75" wide,
  • Requires 7/8" bar clamps on bike
  • Raises handlebars 2 inches and allows fore/aft position adjustment
  • Provides dual pivot points for optimal bar positioning
  • One piece design is made from solid aluminum for superior strength
  • Available for 7/8" - 7/8" or 7/8" - 1 1/8" bars
Choose Bar Size
$99.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Handlebar Riser, 2" ROX Anti-Vibration

Universal fit. May require additional adjustment or modification.

These versatile Risers allow you to clamp a 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1- 1/8" aluminum "fatbar". If you are thinking of going to a fatbar after you bend your stock set or just want the versatility and option to run any bar, this is the riser to go with. Reducers lock into risers to insure no slippage between components. Anti-Vibe Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations (use standard pivoting risers). These risers use 8mm bolts. Always check and confirm that your bike has adequate cable and brake line length before installing any handlebar risers.

Choose Color
$171.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Handlebar Riser, Rox Pro-Offset Elite Block

Universal fit. May require additional adjustment or modification.

This unique design from Rox allows you to move your bars either closer (1" up and back) or further away (1" forward and 1-1/4" up) depending on rider preference. These risers have an oblong mounting hole so that they will fit virtually any triple clamp with 8mm bolts. A set of reducers lock into the risers ensuring no slippage whether you have a 7/8" or 1-1/8" bars.

Because these are offset there may be limited clearance between the gas tank and the risers when the bars are fully turned on some models.

Choose Color
$99.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebar Riser, Solid Mount Adapter

Universal fit. May require additional adjustment or modification.
  • Adapt 7/8" bar mounts to accept oversized 1-1/8" handlebars
  • An economical alternative to replacing expensive top triple clamps
  • Include mounting bolts.
  • Raises handlebar 20mm.
  • Polished aluminum
$49.95

Handlebar mounts that replace your stock clamps. These raise your handlebars 1 inch. Choose 7/8" for standard handlebars or 1-1/8" to allow installation your choice of oversize handlebars.

Choose Bar Size
$39.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Steering Stabilizer, GPR V4

DR650 '96 - '23

The GPR V4 stabilizer is designed to be "tucked" away under the bars and is still easily adjustable without raising the handle bars too high.

  • Kit includes damper, bolt on post mount, below the bar mounting system, and complete instructions.
  • Only raises bars about 3/4".
  • Will only work with Fat Bar style (1 1/8" clamp area) handlebars and stock triple clamp.
$589.95

Grips, Heated A'ME Full Waffle

Universal fit. May require additional adjustment or modification.

Features:

  • BluPulse™ Technology combines intelligent micro electronics with thermal sensors in each grip allowing the rider to select between six temperature settings
  • Ergonomic Design, reduces wrist and hand stress
  • Universal Throttle System designed to fit the vast majority of Sport and Dual Sport bikes
  • Intelligent power shut off system, prevents accidental battery power loss
  • Made of a specially formulated Valcathane™ material that produces a soft but durable surface
  • Glue-less design features molded grip on throttle slide and left hand Clamp-on grip

Temporarily out of stock, No current available ETA.  Please check back later.

$149.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Grips, Heated BikeMaster

Universal fit. May require additional adjustment or modification.

Highly efficient design delivers warmth faster than traditional heated grips.

Choose from the standard five level push button temperature controller, or the LCD display controller which shows the selected heat level and available battery voltage.

Choose Controller
$66.32
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Grips, Heated Koso Apollo

Universal fit. May require additional adjustment or modification.

The Apollo Heated Grips are designed with an integrated adjustable thumb switch, which allows them to easily fit on any kind of motorcycles on the market. The integrated thumb switch gives control to the rider to adjust the temperature level while keeping hands on the bar for a safer ride.

Its wide temperature setting range will keep the rider comfortable under the cold riding conditions.

The 5 color LED display will enhance the visual look of the heated grips and will allow the rider to quickly know at which heat level the grips are set.

This system will also detect if the battery voltage is too low and will automatically shut down the heated grips in order to make sure the rider have enough power to start the engine or use the motorcycle.

Specifications:

  • Integrated thumb switch designed for easy installation and control.
  • “Plug & Play” wiring connections to shorten the installation time.
  • Wide temperature settings for various weather conditions.
  • Low Battery Warning protection to ensure the motorcycle has enough power to start.
  • 5 color LED Indicators for the rider to quickly know in which heat level the grips are set.
$144.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Grips, Motion Pro RoadControl

Universal fit. May require additional adjustment or modification.
  • Ergonomically designed
  • Medium-density Thermoplastic Rubber (TPR) compound provides excellent feedback and control, without sacrificing durability
  • Full diamond pattern for an unparalleled feel in both wet and dry conditions
  • Inner diameter optimized to keep grips secure in any conditions
  • 115mm overall length; fit 7/8" bars and throttle sleeves
$10.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Grips, ProGrip 714 Rally

Universal fit. May require additional adjustment or modification.

These grips feature a thicker design that dampens vibration. The soft shoulder allows ease of movement. Three wire-tie grooves are molded into the grip to make securing them a breeze. We think they are great!

Add Grip Glue
$12.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Grips, ProTaper Pillow Top

Universal fit. May require additional adjustment or modification.

Reduces vibration and cushions impact. Inner core compound perfects the bonding interface with bars. Anti-Rip Tip™ uses denser compound to increase life of grip. Designed to self-clean and shed mud away from outer surface. Tacky gel-like surface compound is perfect for offroad and MX.

Add Grip Glue
$13.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Grips, Renthal Single-Compound

Universal fit. May require additional adjustment or modification.

Each pattern is available in three advanced synthetic rubber compounds. This means you can have the optimum combination of strength, tackiness and shock absorption to suit every riding condition and individual style. Soft grip is extremely soft, giving you a very comfortable ride, great feel and reduces the chance of blisters; however, because the grip is so soft, it wears quickly. Medium is a compromise between firm and soft. Firm grip has the same feel as a stock grip, it is very strong and has very good resistance to tearing and abrasion. Half Waffle has waffle pattern in finger area for traction and diamond pattern on palm side to reduce blisters. Full Waffle: designed after the CR Honda® grip.

Add Grip Glue
$16.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Grips, Vans Cult - ODI

Universal fit. May require additional adjustment or modification.
  • Feature the classic Vans waffle sole pattern with a subtle domed center section for improved ergonomics and vibration dampening
  • 125mm in length
  • Fit 7/8" bars
  • Sold in pairs
Add Grip Glue
$19.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Cruise Assist, "Crampbuster"

Universal fit. May require additional adjustment or modification.

This little jewel reduces hand fatigue and cramping on long rides or daily commutes. The Crampbuster is not a throttle locking unit but, rather a simple clip-on device which allows you to relax your grip while riding.

$10.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Cruise Control, Go Cruise

Universal fit. May require additional adjustment or modification.

The Go Cruise cruise control mounts over the throttle grip and rests on the brake lever to hold your throttle open, allowing you to stretch and rest your hand on long rides. Installs and removes in seconds with no tools. You can roll off the throttle manually to disengage the Go Cruise.

$19.95

Ease the pressure on your wrist during those long highway drones out to where the fun begins. ProCycle has developed this kit that includes a Vista-Cruise throttle lock, a specially modified alloy throttle tube and an anchor plate that attaches to your throttle housing. Just flip the thumb lever down to apply enough friction to hold the throttle in place. Use the supplied longer screw to attach the anchor plate to your lower throttle housing bolt hole. Also included is a tension adjustment tool that you can keep on your key ring. Keep the applied tension lightly adjusted so it's easy to roll the throttle off.

  Fits bikes with dual cable throttle housings.

$89.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Throttle Tube, Billet

DR650 '92 - '23

Suzuki makes it almost impossible to replace your stock grips. It's much easier with a new throttle tube. Removable end cap for bikes with hand guards.

$44.95

Throttle tube and cams are CNC machined from 6061 aluminum. The Red H100 pulley opens the throttle approx. 15% faster than the stock unit. The Gold H200 cam starts at approximately the stock ratio, but then ramps up to a quicker pull. This gives you more control at low speeds.

Less turn means less "elbow drop", allowing for a more comfortable riding position. Either of these cams will work just perfectly in the stock throttle housing. There is a removable end cap on the throttle tube in case you have hand guards

$69.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Throttle Tube, Quick

DR650 '92 - '23

Opens your throttle 15% faster. No more 'double handfuls' to get it wide open. Removable end cap for bikes with hand guards.

  Fits bikes with dual cable throttle housings.

$54.95

This bracket mounts between the frame and your right footpeg bracket (works with both stock and low mounts) and allows you to adjust the slop out of the stock system. Puts the pedal in the ultimate location for immediate brake activation and eliminates unwanted pedal motion. Kit includes plate, adjuster bolt and lock nut and instructions.

$34.95

Warp 9 has created a beautiful brake pedal machined from billet aluminum to an 8mm thick work of art. A stainless steel pin eliminates wear in the frame. This pedal has the ability to move the spring loaded brake tip 10mm either way from the center position. The arm is arched to provide clearance for riders who have the lowpeg + centerstand combination.
 

$119.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Brake Pedal, OEM Suzuki

DR650 '96 - '23

A stock replacement brake pedal for the DR650. Nothing fancy but sure gets the job done. Just order it up and get back on the trail. See our Brake Pedal Adjuster Bracket that allows you to adjust the position of your brake pedal to perfection.

$67.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Lever Set, OEM Replacement

DR650 '90 - '09

A set of replacement brake and clutch levers. Standard length. Sold as a set.

Please notice that there is a difference in sets from 90-09 and from 10-current! Order the set for your model year DR.

Choose Year
$22.95

First there was the Warp 9 "4-Finger" Lever, now there is the Warp 9 "3-Finger" Lever Exclusive to ProCycle. Yep, the original shorty (next item below) is a full 4-finger type lever. These are a full half inch shorter. You asked for 3-finger levers, and we had Warp 9 make them for us. Brake lever includes a nice billet clamp with nylon sleeve to allow the assembly to rotate on impact. Will not fit with the stock OEM wind deflectors.

 Will not engage the clutch switch on 2010 and later models

 

Choose Type
$77.95

Billet levers that are short enough to provide clearance for your hand guards. Warp 9 Flex Brake Levers are machined billet, anodized and hinged with a CNC machined master cylinder interface. Adjustable reach allows customization to the rider's hand size. Double hinge design allows lever to flex out of the way in most impact situations. These high quality levers are approximately 1/2" shorter than stock. Brake lever includes a nice billet clamp with nylon sleeve to allow the assembly to rotate on impact. These levers work with the stock brake light and clutch safety switches. Will not fit with the stock OEM wind deflectors.

 Will not engage the clutch switch on 2010 and later models

In stock with limited availability in Clutch Lever only, discontinued item.  "3-Finger" levers still available.

$39.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Lever, Parking Brake BrakeFix

Universal fit. May require additional adjustment or modification.

Attach this over your brake lever and hand grip, squeeze the brake lever, pull the locking bar in and lock the black portion down. This creates a locked front brake, making parking safe and secure with about 5 seconds of effort.

To unlock the BrakeFix, you just lift the back of the black hooking portion to release it. This takes about 2 seconds. Perfect for use with Snapjack type stands or just parking on an incline.

$19.95

These colored tips are for the Warp 9 Shift Levers only. If you have damaged yours in same fashion, or just want a touch of color, this is the hot ticket. These are held to the cast Warp 9 lever with a pin and e-clip making them easy to change out. Includes new pin and e-clip in case you lose yours.

You can also order just a new pin hardware kit which comes with new pin, clip, pinch bolt, spring, and spacer.

$11.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Shift Lever, Folding

DR650 '90 - '23

Replacement shift lever with folding tip.

This lever is made for the DR350 and the '90-'95 DR650 but can be adapted to fit '96-up bikes by slightly bending the pedal outward from the crankcase.

$30.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Shift Lever, Warp 9 Racing

DR650 '96 - '23

The Warp 9 shift lever is black anodized and the Warp 9 logo is laser etched into the finish. Comes with a black anodized knurled aluminum tip that folds and returns via a stainless-steel return spring. Includes the pinch bolt as well.

The tip is replaceable in the event of damage or if you just want to spiff up you bike with a different color. The replacement tips are available in Black, Blue, Orange, Red and Yellow.

$28.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Choke Cable

DR650 '96 - '23

Genuine OEM replacement choke cable.

Add Cable Lubricant
$36.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Choke Cable Fitting, Billet

DR650 '90 - '23

The plastic fitting that secures the stock choke cable to the carburetor is delicate and easily broken. A broken fitting can cause hard to solve idling and running problems. CNC machined from billet aluminum and anodized blue or black. If you want to retain your handlebar mounted choke this may be the solution.

  These no longer fit the new version of the ProCycle Remote Choke Cable.

Choose Color
$19.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Clutch Cable

DR650 '96 - '23

A quality OEM replacement clutch cable.

Add Cable Lubricant
$39.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Emergency Cable Repair Kit

Universal fit. May require additional adjustment or modification.
  • Handy, compact kit for on-the-go emergency throttle, clutch and brake cable repairs
  • Includes 2 different diameter 6.5 long inner cables and an assortment of cable ends
$19.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Hydraulic Clutch, Magura

DR650 '96 - '23

We have worked closely with Magura to come up with a kit that fits properly and we have a couple in stock with a few more on the way in a week or two.

Want an easier pull on your DR clutch? No cable to break? Then say hello to the Magura Hymec Hydraulic Clutch. Simply remove the stock perch, lever and cable in bolt this in its place. This system replaces the stock cable with a small lightweight hydraulic system for improved clutch control, easier operating pressure, a constant pressure point and smoother actuation.

Developed over many years and tested under the toughest conditions possible in the off-road motorcycle world. World champions to novices all agree on the benefits of the Hymec Hydraulic Clutch system. Due to demand, Magura is now making this available for many dual-sport motorcycles, and now the DR650!

Never hurts to have a bit of the Margura specific Blood Red hydraulic fluid sitting on your shop bench. 4 oz. bottle available as an option for only $5.95.

Add Hydraulic Clutch Bleed Kit, Magura
$329.95

Spare replacement throttle cables for your TM40 carburetor conversion. Fits the stock throttle housing.

These are new premium low-friction cables. They will also work with the OEM Suzuki BST40.

Add Cable Lubricant
$49.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Mirror Extenders

Universal fit. May require additional adjustment or modification.

Can't see past your shoulders? These mirror extenders will get your mirrors higher and farther out for a much better view of the road behind you.

  • Aluminum extension with Japanese 10mm x 1.25 male and female threads
  • Works with standard Ball Stud Base to offer clearance in some applications
  • Torque spec: 5 Nm
  • Sold in pairs
Choose Length
$12.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Mirror Mount Adapter

Universal fit. May require additional adjustment or modification.

Replaces all 2 bolt style clutch/brake lever mount clamps on your clutch or brake lever holder. Can help save space on short bend handlebars.

$24.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Mirror Mount, Split

Universal fit. May require additional adjustment or modification.

With the split back, you don't need to remove your grip or throttle tube, just put it on and tighten 'er down. Put the mirror in and hit the road. Clean and simple.

$11.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Mirror with Mount, KTM Style Folding

Universal fit. May require additional adjustment or modification.

This new mirror can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price.

Fits either left or right side and includes handlebar mount.

Sold individually

$29.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Mirror, Doubletake

Universal fit. May require additional adjustment or modification.

Made from a nylon and fiberglass composite, these mirrors are extremely durable. They easily fold out of the way when you head off-road.

Enduro Mirror 4"

Ideal for dualsport use, where you want a low profile when folded down. SAE spec convex glass gives a much greater field of view than flat glass.

ADV Mirror 3" x 5"

Adventure mirrors are designed for adventure riding where you want your mirror extended most of the time.

Mirrors mount to any 10mm perch. Mirror and arm included as shown in pictures.

Sold individually.

Choose Style
$50.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Mirror, Folding Dualsport

Universal fit. May require additional adjustment or modification.

This new mirror screws into your stock mirror mount but can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price. Fits either left or right side.

Sold individually. If a set is needed, order two.

$22.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Mirror, PSR Dualsport

Universal fit. May require additional adjustment or modification.

PSR dual sport mirrors come with a slightly convex mirror for a wider field of vision behind you. The round mirror is 4.25" in diameter while the oval is 3.75" x 3". These mirrors are easily adjustable and fold out of the way quickly with the 1" RAM mounts.

The RAM Ball Stud Base used for both mirrors will go into any standard 10x1.25 threaded mirror base.

Sold individually. If you need a set, please order 2.

Choose Mirror Shape
$47.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Mirror, Trail Doubletake

Universal fit. May require additional adjustment or modification.

Just two inches in diameter, this is the smallest mirror available. Perfect for bikes meeting legal requirements for street legal rules. Simply zip-tie the mirror to your handlebars out of the way of brush and protected from crashes.

Sold individually.

$24.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Mirrors, Bar-End Mount

Universal fit. May require additional adjustment or modification.

Bar end mounted mirrors move the mirrors out past your elbows so you can actually see what is behind you. They can mount with or without hand guards.

$49.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Cable Luber, Motion Pro

Universal fit. May require additional adjustment or modification.

Keep your cables lubed up and working freely, with Motion Pro's Cable Luber. This tool is used to inject lubricant into any cable housing. Clamps over housing and cable allowing an aerosol can with nozzle to be connected. Once the lubrication solution runs out the far end, the cable is lubricated.

Add Cable Lubricant
$10.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Cable Luber, V3 Motion Pro

Universal fit. May require additional adjustment or modification.

Designed to seal completely around the cable housing and stop all those messy leaks. With the unit closed and sealed around the cable, your cable gets better lubrication and you waste less lubricant.

  • Works on most cables with a 4mm - 8mm O.D. housing.
Add Cable Lubricant
$23.95