DR650: Wheels

We start with an Excel rim, OEM hub, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike. Optional upgrades include billet a Warp 9 hub available in 5 colors and SUN rims available in 3 colors.

Our pro shop then laces and trues your wheel to perfection, giving you the highest quality custom wheel available.

• New OEM or Warp9 hub with bearings and seals installed
• 1.60" x 21" Off-Road
• 1.85" x 21" Dual-Sport
• 2.15" x 19" Adventure
• 2.50" x 19" Adventure (Sun rims are 2.75")
• 2.50" x 18" Street
• 3.50" x 17" Supermoto

Add a tire to your wheel order and we will throw in a tube and mount and balance it at no additional charge.

We start with an Excel rim, OEM hub, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike. Optional upgrades include billet a Warp 9 hub available in 5 colors and SUN rims available in 3 colors.

Our pro shop then laces and trues your wheel to perfection, giving you the highest quality custom wheel available.

• New OEM or Warp 9 hub with bearings and seals installed
• 2.50 x 17 Stock or street (Sun rims are 2.75x17)
• 2.50 x 18 Off-road (Sun rims are 2.75x18)
• 4.25 x 17 Supermoto

Add a tire to your wheel order and we will throw in a tube and mount and balance it at no additional charge.

Complete set of 'Adventure' wheels. These are the same rim sizes as used by the BMW GS and other big adventure bikes. The 19" front and wide 17" rear will give you great twisty road handling on the pavement while still being dual-sport friendly.

We start with Excel or Sun rims, OEM or upgrade to Warp 9 hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike.

Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.

• New OEM or upgrade Warp 9 hubs with bearings and seals installed
• Excel 2.5" or Sun 2.75" x 19" front rim
• Excel or Sun 4.25" x 17" rear rim
• Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples

Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.

We start with Excel or Sun rims, OEM or Warp 9 hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike.

Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.

• New OEM or Warp 9 hubs with bearings and seals installed
• Excel or Sun 3.5" x 17" front rim
• Excel or Sun 4.25" x 17" rear rim
• Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples

Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.

Supermoto forged tubeless wheels. These wheels are machined from forged alloy blanks. A 3.5 x 17" front wheel matched to a 4.25 x 17" rear. Hub can be changed out to fit future bikes. Includes brake rotors, sprocket, cush hub and color matched 90 degree valve stems.

For additional color options please call / email for availability.

Comes complete with:

• Warp 9 front supermoto machined wheel
• Front oversized floating 320mm rotor and bracket
• Warp 9 rear supermoto machined wheel
• Cush rear hub
• Apex rear rotor
• Sprocket

Includes a color matching (to the hub) 90 degree valve stems
Rear hub is Cush drive and includes 6 Cush drive rubbers
All rotors and sprockets bolt patterns are OEM spec.
Tubeless design offers further weight savings and complexity over spoke wheels
Front wheel without rotor is 10lbs 2 oz
Rear wheel Cush drive no rotor or sprocket is 15lbs
Rear wheel direct drive no rotor or sprocket is 14lbs

Add tires to your wheel order and we will mount and balance them at no additional charge.

Warp 9 Supermoto wheels are built with billet hubs, 7000 series aluminum rims and laced and trued with stainless steel spokes and nipples.

The 3.5" x 17" front wheel includes a 320mm brake rotor and caliper relocation bracket.

The 4.25" x 17" rear wheel also comes with a rear brake rotor already mounted.

Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.

Rear wheel Includes Sprocket Carrier with 525 40T Sprocket installed that matches selected hub color.

Build Your Own Flat Track Wheels. These rims are the normal flat track sizes for full size dirt bikes.

We can supply rims and spokes for almost any bike. All we need to know is the year and model of your hubs. Rims are custom drilled and spokes are made to order.

We use high quality Excel or Sun rims and Buchanan's heavy gauge stainless steel spokes and heavy-duty nipples.

• Excel 2.5x19 or Sun 2.75x19 rims
• Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples
• Hubs not included.

Want us to build them for you? Send us your hubs and add "Lace and True" to your order and we will lace and true your rims to your stock hubs.

  Contact us before removing your wheels as some bikes will need measurements taken.

Black Excel wheels are only available for 36 spoke dimpled rims.

Build Your Own Supermoto Wheels. These rims are the normal supermoto sizes for full size dirt bikes. 3.5x17 front and 4.25x17 rear.

We can supply rims and spokes for almost any bike. All we need to know is the year and model of your hubs. Rims are custom drilled and spokes are made to order.

We use high quality Excel or Sun rims and Buchanan's heavy gauge stainless steel spokes and heavy-duty nipples.

• Excel or Sun 3.5x17 front rim
• Excel or Sun 4.25x17 rear rim
• Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples
• Hubs not included.

Want us to build them for you? Send us your hubs and add "Lace and True" to your order and we will lace and true your rims to your stock hubs.

  Contact us before removing your wheels as some bikes will need measurements taken

Excel Black wheel only available for 36 spoke dimpled rim.

Need a few spokes to freshen up your old wheel? Suzuki only sells spokes in complete sets. Here we have individual spokes with nipples so you can get only the spokes you need. Rear spokes are 2 different sizes. The left side - sprocket side - is shorter than the right side.

These spokes fit the original OEM hub and rim only. If you need spokes for custom wheels please contact us.

Polyurethane drive cushions for the DR. Polyurethane has a higher abrasion, cut, and tear resistance than rubber as well as much better resistance to chemical breakdown. This will offer longer life and better damping when compared to the stock rubber cushions.

The DR650 is rather hard on the cush drive rubbers. Replace these any time you feel excessive play in the sprocket carrier hub. Excessively worn dampers can cause the cush hub bearing to fail - which will ruin your sprocket carrier. Sold as a set of 6 rubber dampers.

A premium billet sprocket carrier from Warp 9 Racing that houses 2 bearings to help protect against the sideways twisting load that is commonly known to prematurely wear out the bearing and cush rubbers. This wear can cause extreme failure possibly damaging the hub.

Offered in anodized Silver or Black, Includes spacers and hardware.

These are only recommended to work on Warp 9 hubs.

Billet sprocket carrier from Warp 9 Racing. Available in several colors.

The cush hub (sprocket carrier) bearing leads a tough life. This is especially true if your cush rubbers get old and soft. They can allow the chain to pull the cush hub sideways putting a twisting load on the bearing. If there's any question about the condition of your bearing replace it now with this double sealed bearing and quality seal.

With this upgrades, you can avoid having to keep new replacement cotter pins on hand every time you adjust your chain.

Eliminates the stock speedometer drive for those who have replaced their stock unit with a Vapor or something similar. Light weight billet alloy spacer and a seal to protect your wheel bearings.

Choose 17" Supermoto, 19" Adventure or stock 21" front wheel. All work with the stock DR650 speedometer and cable on either the stock or Warp 9 hub.

Includes all wheel bearings, new dust seals. The rear kit includes the bearing and seal for the cush drive hub (sprocket carrier). All bearings are sealed on both sides.

Genuine SKF wheel bearings. Includes all wheel bearings, new dust seals. The rear kit includes the bearing and seal for the cush drive hub (sprocket carrier). All bearings are sealed on both sides.

Warp 9’s Pro Rim Locks are developed with Ice Track, Dirt Track and Flat Track Racers in mind!

Burnt Titanium Main Bolt

Lightweight Forged Aluminum Body

Black 7075 T6 Tower Nut and Base Washer

Base washer is machined to match each specific rim curvature for a perfect fit

About half the weight of OEM rim locks!

1.60 front  – 1.8 oz

1.85 front – 2.0 oz

2.15 rear – 2.3 oz

2.50 rear – 2.7 0z

3.00 rear – 3.10 oz

Sun rims are our favorite. They are very strong and come very round and true right out of the box. Sun rims make building a wheel enjoyable. Standard rims are silver but Sun rims are also available in black or gold. Sun rims are made in the USA.

These custom rim and spoke kits can be made to work for any bike with wire spoke wheels. Your rim & spoke set will include Buchanan's custom heavy gauge stainless steel spokes and plated nipples. Please leave the year and model of your application in the comments section of the check out page. Also let us know which rim is front or rear.

Would you like us to build your wheels for you? Select Lace and True from the add-on menu and send us your hubs!

A professional level adjustable spoke torque wrench. Range from 0 to 62 inch pounds. The handle has a rubber coated end to protect your rims from scratches. Includes Torque wrench, standard handle (for tough disassembly work) and seven different size tips, all packed in a protective case.

Includes Tips 5.1, 5.6, 5.8, 6.1, 6.3, 6.5, 6.7, 6.8, 6.9 and Spline drive.

• Interchangeable tips to fit 8 sizes of spoke nipples.
• ( 5.6 / 5.8 / 6.0 / 6.2 / 6.4 / 6.6 / 6.8 / 7.0 mm )
• Main shaft is CNC precision machined from 7075A aluminum and designed for optimum grip.
• Tips are made of heat treated steel for strength.

Convenient professional grade spoke wrench, a great addition to any tool pouch.

• Knurled nonslip aluminum handle
• Includes 6.8mm tip
• Quick release ball detent tips allows for quick changes to other optional sizes

Recommended for use with Warp 9 wheels. Please measure nipple size to ensure proper fit.

A must for getting your wheels straight, concentric and true. For use with a truing and balancing stand.

Dial Indicator Features:

• Revolution counter.
• Graduation: .001"
• .100" revolution
• Dial reading: 0-100

Magnetic Base Features:

• 130 lbs. of pull.
• With fine adjust.
• Base: 2-5/8" x 2"
• Overall Height: 9"
• Permanent magnetic type ON/OFF switch makes it easy to rest on iron or steel.

Kit Includes:

• Dial indicator.
• Magnetic base with fine adjust.
• Supplied in plastic storage case.

Always wanted to build or true your own wheels? Maybe just be able to balance your wheels after changing tires. This stand is perfect for both of those tasks.

• Features a bubble level to balance wheels correctly the first time
• Steel plate construction for durability and stability
• Comes with shaft, cones and spacers to fit just about any wheel

Steel wheel weights replace the old lead ones that are no longer legal in some states. Mount up new tires and make sure they are balanced for a smoother ride and longer tire life.

This is a 60 piece pack, 1/4 oz. weights with adhesive backing.