Africa Twin (CRF1000L)

The CRF1000L is a 998 cc (60.9 cu in) 270° crank, parallel-twin dual-sport that revived the Africa Twin name for the 2016 model year. It became available in the UK in late 2015 and early 2016 in the US. It was developed as a modern interpretation of its predecessors, the XRV 750 and XRV 650, based on the NXR-750 which won the Paris-Dakar rally four times in the late 1980s.

Chain Size:      Front Sprocket:      Rear Sprocket:      Front Tire:      

Rear Tire:      

Spark Plug:
525x124 16T 42T 90/90-21 150/70-18 SILMAR8A9S

Featured Products

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

EFI Programmer, EJK

Africa Twin (CRF1000L) '16 - '17
$249.95

The EJK evolved out of the need to address the ever-increasing complexity of factory fuel injection. For the newcomer to the market or professionals wanting an easier method for tuning fuel injection, the EJK is a customizable solution for the rider that wants to take control of their tuning needs.

This unit is a piggy-back EFI controller because it does not replace the stock ECU, but rather monitors the signals to the injectors and makes fuel adjustments based on the mode settings. The GEN 3 has a push button interface allowing access up to 6 different modes to allow for quick fine tuning by the end user without needing a computer.

Key Features:

  • No computer or dyno needed!
  • Plug and play, simple to install, base settings preset
  • Unique load based technology
  • Full range tunability available
  • Does NOT interfere with stock ECU operation
  • Simple push button adjustment interface
  • Water-resistant 
  • 2-Year warranty
  • Compact size - 2.2" H x 3.4" W x 0.5" D
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in Australia

Skid Plate, B&B Off Road Engineering Safari Bash Plate

Africa Twin (CRF1000L) '16 - '21
$359.95

The Safari Bash Plate is a bit bigger and more protective than the Big Tour model. Made from the same 5mm 5083 plate, this plate extends further up the front and around the sides of the motor. There is a specific DCT model that wraps up even further to help protect the important parts on the right side. (See last image.)

Fits with the OEM centerstand, but will NOT work with lower engine crash bars. Will work with Upper Crash Bars from SW-MOTECH, Hepco and Becker and OEM Honda units. Remember, all B&B bash plates are quality built and supplied with all necessary hardware and detailed instructions. Foam or rubber is included wherever it is required.

Last one available in Raw finish.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Muffler, Slip-On LeoVince LV One Evo

Africa Twin (CRF1000L) '16 - '21
Choose Type
$630.95

Two options are available: stainless steel and carbon fiber. The stainless steel features ASIS 204 stainless steel with a special sandblasted finish giving it a titanium-like look. The carbon fiber option is the lighter than stainless steel and features a flat finish that exposes the intricate carbon fiber weave.

  • CAD/CAM design for precise fit
  • Techno-polymer end-cap
  • Weight savings over stock exhaust
  • Increased horsepower across the entire RPM range
  • TIG-welded AISI 304 stainless steel link pipe
  • Tuned to work with stock fuel settings

Engine

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Valve Shim Kit - 9.48mm

Africa Twin (CRF1000L) '16 - '21
$79.95

Includes three valve shims of each size from 1.20" to 3.50in .05 increments. 141 shims in total.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Radiator Hose Kit, Moose Racing

Africa Twin (CRF1000L) '16 - '21
Select Product
$228.95

Moose Race Fit Radiator Hose Kit

  • Manufactured by Samco® Sport UK – the world leader in silicone hose, with over 20 years experience
  • Hand wrapped and 100% visually inspected in the UK
  • European grade hi-temperature silicone guaranteed to 356°F
  • Smooth flow and improved insulation promotes radiator efficiency and improves engine cooling
  • Single-molded, Y-piece hoses eliminate the need to reuse OEM 3-way fitting, which reduces weight and eliminates leak points
  • Single-molded, T-piece hoses eliminate vulnerable threaded leak points and reduce weight
  • Three layers of reinforcement fabric offer high burst pressures and provide better debris/crash resistance
  • Zero block tooling technology results in clear and open hose junctions, free from dangerous and restrictive flashing
  • Used by leading MX/Enduro and Off-road racing teams
  • UV-stable colors don’t fade with heat or sun and are color matched to OEM brands
  • Clamps made from 18/8 marine-grade 100% stainless steel have rounded edges that prevent the clip from cutting into the hose and a non-perforated band prevents clip from biting into the hose
  • Kit contains hoses and necessary clamps
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Oil Filler Cap, Billet PSR

Africa Twin (CRF1000L) '16 - '21
$24.95

CNC machined oil filler cap with locking clip to keep it in place in the roughest conditions. The cap is pre-drilled and the locking clip is safety wired to the mounting tap with a section of silicon tubing, that will not melt or discolor, over the wire. First class all the way. Available in Silver, Black, Blue or Red.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Oil Filter Magnet

Africa Twin (CRF1000L) '16 - '21
$13.95
  • Reduce wear, and significantly increase your engine life.
  • Easy to install. Place on outer side of filter.
  • Powerful magnet traps abrasive metal particles down to 1 micron. OEM oil filters only filter particles down to 90 microns, leaving behind the most harmful particles to circulate through your engine.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Oil Filter, Value 5-Pack Clutch Circuit

Africa Twin (CRF1000L) '16 - '21
$31.95

Africa Twin with DTC

  • In addition to the main oil filter, bikes with DTC have an additional oil filter in the clutch circuit
  • Constructed using the best materials available
  • With the experience of more than five decades, constant research and development and featuring a completely modern production facility, Hiflofiltro offers some of the best quality filters in the world
  • TUV approved and production monitored to ensure OEM or better quality
  • Sold as a package of 5 filters
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Oil Filter, Value 5-Pack Hi-Flo

Africa Twin (CRF1000L) '16 - '21
$35.95
  • The original Hiflofiltro factory was founded in 1955 and has been manufacturing filters for the OEM motor industry since 1963.
  • Constructed using the best materials available.
  • With the experience of more than five decades, constant research and development and featuring a completely modern production facility, Hiflofiltro offers some of the best quality filters in the world.
  • TUV approved and production monitored to ensure OEM or better quality.
  • Sold as a package of 5 oil filters.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Drain Plug Washers, 12mm

Africa Twin (CRF1000L) '16 - '21
$6.95

A 10-pack of drain plug sealing crush washers. Replace your sealing washer at every oil change to prevent a leak.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Drain Plug, Magnetic

Africa Twin (CRF1000L) '16 - '21
$13.95

Extra protection for your motor! Strong magnet at the end of the plug picks up metallic flakes in your oil, protecting your engine!

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Spark Plug, Iridium NGK

Africa Twin (CRF1000L) '16 - '21
Add Lubricant
$63.95

Iridium spark plugs are made with premium quality materials.

Iridium plugs last longer than standard ones, meaning you won't have to replace them as often.

  • The ultimate in the evolution of spark plug technology and performance from an industry leader
  • The iridium electrode is 25% smaller than a platinum electrode, and it's just 1/4 the size of a conventional nickel electrode
  • Ultra-small diameter center electrode reduces voltage requirement and extends ignition system life
  • Metal shell plating has enhanced anti corrosion qualities

Sold individually, unless otherwise stated.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Service & Repair Manual, Factory Honda

Africa Twin (CRF1000L) '16 - '21
$88.00

The genuine factory shop service and repair manual. This is the reference manual Honda dealers use in their service departments. It has all the necessary info to do maintenance or repairs to your Africa Twin CRF1000L.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Camshaft Installation Tool Kit

$199.95

Includes degree wheel, dial-gauge, multi-position stand, extension, 3-sizes of positive-piston stops, and a handsome wooden carrying case.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Clutch Holding Tool

$28.95

Made from medium carbon steel with hardened jaws. It features spanner pins and the jaws open up to 5" wide. It's ideal for holding clutch hubs, flywheels, gears, sprockets, etc. Made by Motion Pro.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Crank Case Separator Tool Set

$79.95

This tool is designed to separate vertically split crank case halves on two and four stroke engines. Adjustable arms allow it to be used on multiple bolt patterns found on a variety of makes and models of motorcycles. Industrial grade steel construction with black oxide finish for long service life. Comes with 8mm mounting bolts and 6mm adapters. Protective carrying case included.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Oil Filter Removal Tool, Motion Pro

$9.95

For easy removal of recessed oil filters.

Conical point screws pierces and grabs the metal end cap of the filter.

reduces potential damage to the engine cases.

NOT for use on re-usable oil filters.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Temperature Stickers

$14.95

A 3-pack of easy to apply strips measure the temperature of engine, suspension, and radiator components. Temperature range 146° to 248°

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Thread Chasers

$4.95

Thread Chasers are designed to clean and re-cut damaged aluminum threads.

this kit contains the two sizes most common on metric motorcycles, M6x1.0 and M8x1.25.

Thread Chasers also remove dirt and metal shavings that become captured in thread grooves.

Uses 8mm or 10mm hex sockets, a Must for all tool kits.

Fuel and Intake

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

EFI Programmer, Dynojet Auto Tune Kit

Africa Twin (CRF1000L) '16 - '21
Select Product
$324.95

*NEW OFFERING

The Dynojet Auto Tune kit is an "add on" accessory that can be used with any of our Power Commander V’s. It connects to the PCV with a single cable and requires only a ground and +12 volt connection to be made to install. If your exhaust does not already have one, a "weld in" O2 sensor bung is included.

Once installed, the Auto Tune kit monitors the fuel mixture (by installing the included Wide Band O2 sensor in the exhaust). It then sends this information to the Power Commander V and automatically corrects it while you ride. Each map that we offer has preset Air/Fuel ratio values included that we find to be the best overall settings. This lets you simply plug in the unit and let it do the work.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

EFI Programmer, DynoJet Power Commander POD-300 Digital Display

Africa Twin (CRF1000L) '16 - '21
$249.95

POD-300 Digital Display

Simply connect the included CAN cable and you’re ready to go; there’s no need to tap power or deal with other messy connections.

  • Real time fuel adjustments
  • Display channels real-time: RPM, TP, map position (when using map switch), duty cycle, fuel change, speed, pressure, ignition change & wideband air/fuel ratio- (w/WB2 or AutoTune connected)
  • Weather resistant for use in all conditions
  • Log channels saved to internal memory and can be viewed / analyzed with Dynojet’s PowerCore Software
  • High contrast display, viewable in direct sunlight
  • 3 Programmable light alarms
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

EFI Programmer, DynoJet Power Commander V

Africa Twin (CRF1000L) '16 - '17
Choose Year
Add PC V Map Switch
$399.95

 This easy to install fuel control unit, has a USB connection to hook up to your computer.

The PC V is capable of mapping each cylinder individually for each gear, with the gear position input connected.

Two-position map-switching is built in and with the addition of a Single Pole, Single Throw switch, you can toggle between two different fuel maps quickly and easily.

(Map switch is not included. Sold Separately.)

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

EFI Programmer, DynoJet Power Commander V Map Select Switch

Africa Twin (CRF1000L) '16 - '21
$49.95

Two-position map-switching is capable with this Single Pole, Single Throw switch.  You can toggle between two different fuel maps quickly and easily.

For Use with the DynoJet Power Commander V

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

EFI Programmer, EJK

Africa Twin (CRF1000L) '16 - '17
$249.95

The EJK evolved out of the need to address the ever-increasing complexity of factory fuel injection. For the newcomer to the market or professionals wanting an easier method for tuning fuel injection, the EJK is a customizable solution for the rider that wants to take control of their tuning needs.

This unit is a piggy-back EFI controller because it does not replace the stock ECU, but rather monitors the signals to the injectors and makes fuel adjustments based on the mode settings. The GEN 3 has a push button interface allowing access up to 6 different modes to allow for quick fine tuning by the end user without needing a computer.

Key Features:

  • No computer or dyno needed!
  • Plug and play, simple to install, base settings preset
  • Unique load based technology
  • Full range tunability available
  • Does NOT interfere with stock ECU operation
  • Simple push button adjustment interface
  • Water-resistant 
  • 2-Year warranty
  • Compact size - 2.2" H x 3.4" W x 0.5" D
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Filter

Africa Twin (CRF1000L) '16 - '21
$42.95

Original equipment replacement 'in-tank' fuel filter.

Traveling where fuel quality will be questionable? Carry a spare fuel filter.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Air Filter Set, Twin Air

Africa Twin (CRF1000L) '16 - '21
$124.95

Two layers of foam, catch and retain nearly any contamination you will encounter.

The adhesive that holds the two materials together withstands repeated cleanings even with harsh solvents or gasoline.

These filters are slightly smaller than stock to increase air space around the filter, improving circulation and air flow. A thick, flat breathable foam gasket forms a grease free sealing ring that ensures maximum contact with your airbox.

This kit includes 2 fire resistant pre-oiled air filters and 2 plastic filter frames.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Air Filter Set, Twin Air Replacement Foam

Africa Twin (CRF1000L) '16 - '21
Choose Filter
$38.95

Replacement Foam Filters for your Twin Air filter. You could keep these in a tank bag for immediate replacement on the trail. No need to clean the set in your air-box until later. Just put these in and let your Twin have clean air right away.

Available pre-oiled or bare so you can apply your own oil. Please know that the bare filters do need to have oil applied prior to using them.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Air-box Filtered Vents

$13.95

Sold in 6 packs

  • Compatible with many air filter boxes.
  • More air flow allows you to add more fuel to your intake mixture, increasing performance.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Carburetor Overflow Canister

$39.95

This canister by Pro Circuit allows you to move the overflow tubes from the carburetor up and out of the way. Universal application.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Clamps, Nylon Ratchet Style

$8.95

Quick release one-piece clamps that saves space. These are great for fuel lines, controlling wires, and can be used many times.

Comes with 4 each of 8mm, 9mm 10mm, and 12mm.

No special tools needed, from Helix Racing.

Gas Tanks

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Auxiliary Natural Tank LED Light Kit

$29.95

Become more visible and look cool while doing it. The ProCycle Natural Tank LED Light Kit will add more light to your bike with the push of a button.

Kit includes a handle bar mounted lighted switch, two 12" LED light strips with adhesive backing, four saddle splice connectors, and a center harness for connecting to your bikes harness.

Installation is quick and easy.

*Please note All colors other than amber and white are recommended for off road use only*

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Gas Tank Grip Pads, TechSpec

Africa Twin (CRF1000L) '16 - '21
Choose Pad Cut
$69.95

Ride once with a set of TechSpec Tank Grip Pads and you won't want to ride without them again. Measuring just .125" thin, you'll feel the difference the minute you throw your leg over and take a seat. The pads improve the relationship between you and your machine! Yep, now you can squeeze it, grip it and rip it!

This precut kit includes right and left grips along with a custom center tank piece that can give you additional grip as well as padded protection. Also reduces abrassion damage to the center area of the tank.

Please note that the two options are made from the same material. The Red/White/Blue set is NOT the color of the Grip Pads, but the color of your Africa Twin. These are cut slightly lower to meld more beautifully with that great paint scheme. If you have any other scheme, please order the Standard Pads.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Gas Cap Tank Vent

$11.95

If you're like us, you hate the long floppy vent hose hanging off the cap of your aftermarket tank. This one-way vent cap replaces the long hose with a short one only about 2" long. It allows air into your tank but prevents fuel from sloshing out. Machined from billet alloy and anodized for good looks.

Thumbnail

  Not for stock fuel tanks!

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Filter, 1/4" - 90° or Straight

Choose Type
$24.95

The small size and right angle hose barbs make this filter easier to fit into the small space between your fuel petcock and carburetor. Filter body is only 7/8" diameter. Straight filter is 2" long, 90 degree filter is only 1-5/8" long.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Filter, 5/16"

Choose Pack
$17.95

This filter is meant for 5/16" fuel lines. Only 1/2" thick it is small enough to fit just about anywhere.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Filter, Gas Tank

Choose Tank Type
$34.95

Fuel supplies can be sketchy at times. This filter lives in your tank to trap dirt and debris as it is poured into the tank. Features a custom shaped adapter that fits securely under the gas cap, creating a leak-proof seal. If it stays out of your fuel, it can't get into the carburetor! Created by the filter experts at Twin Air, this filter fits IMS,  Acerbis and Safari brand gas tanks.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Line Clamp Kit

$5.95

Ordering new fuel line? How about a set of fresh zinc plated clamps to go with it?

These will be sure your fuel line stays connected. A pack of 8 clamps in 2 sizes to fit most 1/4 or 5/16 fuel hose.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Fuel Line Reducer, 5/16" to 1/4"

$7.95

Hose reducer to go from 5/16" line down to 1/4" line. Many bikes have 5/16" carburetor spigots but most aftermarket petcocks are 1/4". This solve the problem of mismatched sizes. Solid brass construction. Can be used to route or repair fuel lines, oil lines or air lines. Barbed ends provide a secure fit.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Line, Premium

Choose Type
$8.95

30" lengths. Sizes shown are ID. All of these lines are stronger and more durable than vinyl fuel lines and are resistant to swelling, UV light, as well as hardening and cracking.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Auxiliary Container Mount Extension, RotoPax

$34.95

Need to mount two containers? A water and a fuel? Two waters? Already have a RotoPax Mount for a single container? Get this extender to work in conjunction with a pack mount and that will be no problem! Single mount, two containers.

 

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Auxiliary Container Mount, RotoPax

Add Extension Mount
$35.95

RotoPax holder made to mount a single Fuel and/or Water container.

Need to mount two containers? A water and a fuel? Two waters? Get the extender which allows you to stack two containers no problem! Single mount, two containers

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Auxiliary Container, RotoPax 1 Gallon

Choose Container
Add Container Mount
Add Extension Mount
$64.95

RotoPax are Rotational Molded - the process which produces indisputably superior products.

  • Thicker walls and stronger construction
  • Bright colors that are less prone to fading
  • Extra threads, thicker walls, and sure-seal gasket guarantee no leaks

Need to mount two containers? A water and a fuel? Two waters? Finally, you can stack multiple packs together! Use in conjunction with a pack mount. You will need to purchase the Single Mount as well as the Extender.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Auxiliary Fuel Pack, Open Trail 1.5 Gal

Add Container Mount
Add Fuel Stabilizer
$59.95

Quality Fuel pack that's slightly larger than RotoPax 1 gal.

  • New seven layer blow molded technology
  • EPA and CARB approved
  • Sleek, low profile design
  • Versatile mounting capability

Note: Mount listed is a RotoPax mount that will fit the Open Trail Fuel Packs.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Auxiliary Gas Bag, Fuel Safe Bladder, Giant Loop

$234.95

Giant Loop's Gas Bag Fuel Safe Bladder conveniently transports 1 gallon of hydrocarbon fuel for power sports use in a collapsible welded film and ballistic nylon reinforced container that rolls up or packs flat when empty, weighing less than 1 pound.

The Gas Bag Fuel Safe Bladder Kit includes 2 pairs of Giant Loop's adventure proof 26" Pronghorn Straps plus a 3-Pack of Fast Funnel Disposable Fuel Funnels.

Each Gas Bag Fuel Safe Bladder is individually pressure tested and made in USA by Fuel Safe, a leading fuel containment manufacturer based in Oregon.

  • Volume: 1 gallon maximum capacity (3.8 liters).
  • Empty weight: 11.5 oz.
  • Dimensions (flat and unfilled): 19.5" long x 9.5" wide. Rolled diameter (empty): approximately 4".
  • Filler neck is standard size, fitting "universal" spouts.
  • Materials & Construction: Welded film bladder sewn into ballistic nylon sleeve with webbing daisy chain anchor points and handles.

 

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Auxiliary Gas Tank, Acerbis

Add Fuel Stabilizer
$112.95

Auxiliary fuel tanks mount to handlebars, forks, or rear racks.

  • Suitable for minis, trials bikes, full size bikes, and anywhere else a little extra fuel is needed.
  • Each tank includes a siphon kit that connects the tank to the main fuel tank and automatically siphons fuel while the bike is being ridden.
  • With this design, the auxiliary tank empties first, before the main tank.
  • Does not interfere with headlight, handguards, rear seat, etc.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Super Siphon

$19.95

This Super Siphon has  a (1/2 inch x 6 foot) long hose, which makes it quite easy to transfer fuel from one bike to another! Simply, shake the hose to prime it and get fuel moving.  The hose is resistant to gasoline and any other hazardous chemicals. Roll it up, stuff it in your bag and you will be very happy whenever you need it.

Body

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Windscreen Extension, Laminar Lip

Africa Twin (CRF1000L) '16 - '21
$89.95

The Laminar Lip windscreens are designed to give an increased wind comfort envelope for the rider by providing additional protection. They achieve this by adding height and width to the stock windshield, for less cost than a completely new windshield.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Windscreen, Adventure Moose

Africa Twin (CRF1000L) '16 - '21
Choose Height & Color
$53.95

Moose Adventure Windscreen

  • Made from aircraft-quality Lucite®​ acrylic
  • Heavy-duty, optically clearer than the OEM windscreens
  • Available in various heights and sizes
  • "Shorty" version (available for some models) reduces buffeting and improves warm-weather comfort
  • Made in the U.S.A.

The shorty screen in 5" shorter than stock shield.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Windscreen, Dual Sport

Choose Color
$129.95

Windscreen attaches to your bike's handlebars. Fully adjustable mounting brackets. Includes 7/8' handlebar clamps.  14" tall & 10" wide.

Thumbnail

  Will not fit 1 1/8" oversize handlebars.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Windscreen, Givi

Africa Twin (CRF1000L) '13 - '21
Choose Series
$184.95

GIVI offers a wide variety of practical windshield solutions to incude the following series:

D - series, this range of replacement windshields are available in clear and smoked versions (model specific) that offer taller than stock versions with some models including a Euro slip for added wind protection.

      Tall - This tinted windscreen from GIVI is a direct replacement for your factory screen, using the same mounting holes and installation hardware as the original. By adding this shield you will be gaining an extra 0.8" in height, improved aerodynamic performance and experience less wind buffeting on your neck and shoulders. GIVI shapes the windscreen to suit the lines on your motorcycle and features a stylish looking smoke tint. Manufactured out of durable and optically clear Plexiglass acrylic this screen will enhance your riding experience on your Africa Twin CRF1000L.

  • Dimensions: Height 19 in. x Width 13.8 in.
  • Directly replaces original factory windscreen
  • 0.8 in. higher than original
  • Simple bolt-on upgrade
  • Improves coverage & protection
  • Enhances aerodynamics & aesthetics
  • Increased protection from insects, weather & debris
  • High-quality Plexiglas ensures superior optical clarity
  • Designed especially for the Honda Africa Twin CRF1000L


A- series, this universal windshield range includes small headlamp mounting fly screens and fairing to 2 point handlebar mounting shields and 4 point handle and fork tube mount larger windshields.

AF - series, the Airflow system offers a unique adjustable windshield that gives maximum wind protection to a wide variety of motorcycle and scooter riders. The upper adjustable windshield blade gives a 7 inch adjustment creating minimum and maximum wind protection.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Windscreen, National Cycle VStream

Africa Twin (CRF1000L) '16 - '21
Choose Windscreen
$174.95

National Cycle revolutionizes windscreen performance with the VStream Windscreen. The patented "V" shape and advanced dimensional contours push the wind vortex away from your head, resulting in a peaceful, quiet riding environment. The passenger's comfort is improved as well.

Reduced wind noise, less turbulence, superior strength.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Windscreen, Parabellum Replacement

Africa Twin (CRF1000L) '16 - '21
$189.00

 The Parabellum Windshield is both taller and wider than the stock shield offering more protection from wind, rain, weather, and anything else you may come into contact with on your journey. The Africa Twin’s off-road roots are not forgotten by this windscreen. The stock Barkbuster like hand guards clear the windshield at full lock while the shield is forward mounted and upright allowing the shield to work well while you are standing on the pegs and moving around on the bike off-road. On the street, you can expect smoother, quieter, over the helmet air flow while improving fuel economy and comfort. The Parabellum screen for the CRF1000L mounts easily with an included screw kit in the stock location. It's made from 3/16 inch cast acrylic and is 16 inches wide at the top. The windshield is available in clear or tint and 3 different heights.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Windscreen, Visor Clip-On Puig

$119.95

Puig Visor Clip-On

  • Suitable for screens with thickness between 3-5mm
  • Multi-adjustable visor adaptable to Puig and OEM windscreens
  • Visor is mounted by clip-ons and does not need to be drilled to the windscreen
  • Visor sizes available include 90x230mm, 100x277mm and 102x325mm
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fender Lift Brackets

Africa Twin (CRF1000L) '16 - '21
$49.95

Muddy conditions are the bane of ADV bikes with low fenders. Get more clearance between your front fender and tire. Our kit uses CNC machined, black anodized brackets. Lifts the front fender 20mm.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Front Fender, Supermoto

$28.95

Universal design.  Vents in the back improve airflow to motor.  Smaller front reduces 'wind steer' and improves high speed stability.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in United Kingdom

Mini Fairing Screen, Adventure-Spec

$36.00

Replacement screen for Adventure-Spec Mini Fairing.

This is for screen only, please see Mini Fairing Support for complete assembly.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in United Kingdom

Mini Fairing Support, Adventure-Spec

Choose Bar Size
$99.95

A universal mini-fairing (for 22mm (7/8") and 28mm (1 1/8") Bars) designed to help you mount anything you choose on an industry standard 30mm x 38mm AMPS 4 hole pattern (perfect for a RAM ball or powered Garmin Montana Rugged Mount). In addition the fairing comes with two holes for mounting a standard cigarette lighter / USB style socket and a 12v rocker switch.

This is for the support mount only, please choose color screen in drop down menu to complete the assembly.

Not for CRF450L (see model specific listing)

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA ProCycle Approved

License Plate Frame, LED

$29.95

This frame includes six, white, full-spectrum LED bulbs on a 6-inch strip for bright illumination of your license plate. It is made in a sturdy cast aluminum, and is powder coated with a durable black finish.

Outside frame dimensions are 7.25" in. wide by 4.2". Center to center mounting hole distance is 5.7 in. All mounting hardware is included.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Body Clips - 10 Pack

Africa Twin (CRF1000L) '16 - '21
$5.99

Three-stage removable, reusable, black nylon push rivets. Comes in a package with 10 individual rivets. The Africa twin has lots of these holding together the body work. They are easily lost or damaged. Carry some spares in your tool kit.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Heat Shield, Side Panel

$14.95

Adhesive heat shield for your new side panel plastics to protect it from the heat of your muffler.

Seats

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

World Sport Modular Seat System, Sargent

Africa Twin (CRF1000L) '16 - '21
Select Product
$624.95

Sargent World Sport Performance Modular Seat System with ZONE SUSPENSION BODY CONTOUR TECHNOLOGY.


Honda Africa Twin, 2016+ (CRF1000L) and
Africa Twin Adventure Sport 2018+ (CRF1000L2) with ZONE SUSPENSION BODY CONTOUR TECHNOLOGY.

Transform your Honda Africa Twin and Adventure Sports into a long-distance explorer! Sargent's patented Zone Suspension Body Contour Technology, beautiful hand-crafted upholstery, and high-quality lightweight precision construction make World Sport Performance Seats the best choice for the long-haul.

In addition, this two-piece World Sport Seat offering for the Honda Africa Twin features marine-grade, UV-stabilized, hand-crafted upholstery specifically designed to maximize the suspension qualities of the Super Cell Foam.

 

 

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foam and Cover Kit, Seat Concepts Comfort

Africa Twin (CRF1000L) '16 - '21
$234.95

Seat Concepts makes some of the finest aftermarket seats available. Hand made in Caldwell, Idaho they will make long days in the saddle something you look forward to, not dread. Their custom and proprietary foam formula provides a more plush ride while still offering necessary support. Their unique shape maintains the basic shape of the stock seat at the front, narrower so that the rider's legs are not spread too far, then tapers out towards the mid-point to better distribute the riders weight over a greater area than the stock saddle.

*Front foam and cover with rear cover only.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foam and Cover Kit, Seat Concepts Rally Comfort

Africa Twin (CRF1000L) '16 - '21
$234.95

The front portion of this saddle is 1" taller than stock. Seat Concepts makes some of the finest aftermarket seats available. Hand made in Caldwell, Idaho they will make long days in the saddle something you look forward to, not dread. Their custom and proprietary foam formula provides a more plush ride while still offering necessary support.

Their unique shape maintains the basic shape of the stock seat at the front, narrower so that the rider's legs are not spread too far, then tapers out towards the mid-point to better distribute the riders weight over a greater area than the stock saddle. For this tall model specifically, they build up the front of the seat, but then dished out the rear slightly to level out the angle of the rider platform. This reduced the angle to eliminate that slide into the tank.

 

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Seat Cover, Sheepskin

$69.95

This is the secret for being able to put in those 500 mile days. Even a good touring seat can feel a bit firm after a couple hundred miles. Sheepskin gives that little bit of 'cush' and provides superior air circulation. Velcro straps allow easy removal when you don't need it. Measures 14" wide by 19" long.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Seat Cushion, AirHawk

$112.95
  • Air filled AirHawk 12"x18" cushion custom fits your shape and redistributes pressure that causes numbness and discomfort when you ride
  • Seat cushion cover is constructed of a breathable, stretchable Nylon/Lycra blend with a non skid Urethane base
  • Open mesh side panels allow heat to escape
  • Easily inflates by mouth with no pump needed
  • Mounting straps and Repair patch kit included
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Seat Warmer Kit

$79.95

9" by 9" carbon fiber seat warmer that goes between your seat cover and the foam to keep your backside happy on those really cold days. This improved design produces 25% more heat than most other warmers using just 30 watts.

Kit includes the warming unit, with connector, 24" extension cable, rocker-type on/off switch and stub to splice into your wiring along with complete detailed instructions.

Armor - Bike Protection

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Skid Plate

Africa Twin (CRF1000L) '16 - '21
$414.95
  • Protect vital engine parts and cases from rocks and debris
  • Clear anodized for corrosion protection and good looks
  • Skid plates made from 3/16" 5052-H32 aluminum (some plates use .160" material)
  • Smooth underside won't snag when crossing logs
  • Oil drain hole on all required models
  • Heat-treated chromoly steel clamps keep plates mounted securely
  • All mounting hardware included
  • Replacement clamps available
  • Made in the U.S.A.

 

 

 

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Skid Plate Extension, SW-Motech

Africa Twin (CRF1000L) '16 - '21
Add Skid Plate
Add Centerstand
$85.95

Do you have the SW Motech Centerstand and Skid Plate mounted to your Africa Twin? If so, it is a great idea to mount up the Skid Plate Extension. This plate adds protection to the undercarriage where the engine guard ends, giving you a more complete protection system. 3mm thick aluminum plate mounts to tabs that are built into the Centerstand. The Centerstand and the CS Extension function seamlessly together. These two pieces assure that you are completely protected down under. Kit includes Centerstand, hardware and detailed instructions.

Thumbnail

Please Note that this Skid Plate Extension is only compatible with the SW Motech Skid Plate and the SW Motech Centerstand.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Skid Plate, B&B Off Road Engineering Big Tour Bash Plate

Africa Twin (CRF1000L) '16 - '21
$348.95

The Big Tour Bashplate from B&B Off Road Engineering is built from 5mm 5083 aluminum plate providing protection from rocks and sticks and other debris. This plate will work with the OEM centerstand and most crashbars.

If you are headed out for miles of back roads and trails, please consider the more protective Safari model. All B&B bash plates are quality built and supplied with all necessary hardware and detailed instructions. Foam or rubber is included wherever it is required.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in Australia

Skid Plate, B&B Off Road Engineering Dakar Bash Plate

Africa Twin (CRF1000L) '17 - '21
$633.95

The Honda CRF1000L Twin Dakar Bash plate. Our all new engine protection system is designed to provide all the benefits of a lower crash bar and bash plate in one. It is constructed from 4mm & 5mm 5083 structural plate combined with 20mm heavy wall alloy tubing to form the outer profile.  It is mounted in seven locations to make it the most rigid bash plate on the market. It has a narrower profile and fewer snag points than the conventional crash bars. Available in polished or black powder coat.

FACTS- 

  1. Will fit with most upper fairing crash bars. Honda Genuine do not fit with bash plate on the standard models.
  2. At this stage, we do not know what aftermarket headers the bash plate will fit with.
  3. It has oil drain access points but for a full oil change with the filter, the plate must be removed (10min).
  4. Requires exhaust system removal for first-time installation only.
  5. Fits with the centerstand. Fits with SW Motech, Outback Motortek, Hepco and Becker and Altrider Crash bars UPPERS ONLY
Thumbnail

 A small modification is required to mount bash plate to adventure sports model. The small bracket attached to the bottom of the crash bars that connect to the genuine skid plate must be removed for clearance. Please see image

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in Australia

Skid Plate, B&B Off Road Engineering Safari Bash Plate

Africa Twin (CRF1000L) '16 - '21
$359.95

The Safari Bash Plate is a bit bigger and more protective than the Big Tour model. Made from the same 5mm 5083 plate, this plate extends further up the front and around the sides of the motor. There is a specific DCT model that wraps up even further to help protect the important parts on the right side. (See last image.)

Fits with the OEM centerstand, but will NOT work with lower engine crash bars. Will work with Upper Crash Bars from SW-MOTECH, Hepco and Becker and OEM Honda units. Remember, all B&B bash plates are quality built and supplied with all necessary hardware and detailed instructions. Foam or rubber is included wherever it is required.

Last one available in Raw finish.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Skid Plate, Givi

Africa Twin (CRF1000L) '16 - '21
Add Optional Fit Kit
$318.95

The Givi Skidplate, manufactured from 5mm aluminum, is lightweight and offers excellent protection for vulnerable engine components, whether you have a standard or DCT transmission. All necessary hardware and instructions are included. Compatible with stock sidestand and centerstand.

Provide absolute protection for your AT by including Givi Crash Bars, available in either Black powdercoating or Stainiless Steel.

NOTE: If your CRF1000L did not come with a factory skid plate, you will need to purchase the Optional Fit Kit.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Skid Plate, SW-Motech

Africa Twin (CRF1000L) '16 - '21
Add Skid Plate Extension
$375.95

This skid plate is extremely strong, manufactured from a 5 mm aluminum bottom with 4 mm thick side walls, offering complete protection of the engine block. This unit is built with precision-manufactured mounts that fit directly into the existing frame mount, creating a robust connection that distributes the forces not only to the mounting points but also to the bike’s steel frame in case of ground contact. 8 mm strong rubber sliders also help to absorb and distribute impact forces. This unit completely replaces the wimpy stock plate constructed from just 2.5 mm material.

In addition to providing better protection and a sliding surface for impacts, this guard also offers better header and exhaust protection. Cutouts for both oil drain screws mean you don't have to remove it for changes. This plate is also compatible with Honda side stand as well as the SW-Motech Centerstand.

Provide absolute protection for your AT by including Crash Bars and the Skid Plate Extension, all made by the folks at SW Motech.

This unit is NOT compatible if with the optional shift lever on the DCT version.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Engine Crash Bars, Lower Givi

Africa Twin (CRF1000L) '16 - '21
Choose Model/ Type
$198.95

Givi makes a great set of Crash Bars available for the Africa Twin. If your intentions include off-road riding of any kind, you really should not go without protection. Not only for you, but for your bike too. Even a slow-speed tip-over can cause damage that would make riding away impossible.

Your first choice is whether you would prefer black powder coated steel or Stainless Steel. Both are built from 25 mm diameter material welded to steel mounting plates. Select the lower set based on your color of choice and whether or not you have a standard transmission or a DCT transmission. You must select the correct model in order to ensure correct fitment. These provide protection for the engine and surrounding components. These units do NOT require the upper guards and work great on their own.

Included with each piece you receive a complete set of instructions and all mounting hardware required, in typical Givi fashion.

Please Note that these Crash Bars are also compatible with the Givi Skid Plate.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Engine Crash Bars, SW-Motech

Africa Twin (CRF1000L) '16 - '21
Choose Fitment / Color
$312.95

Adventure bike heaven is off-road headed down a dirt road or a trail. If that is your dream, then as you know, you are going to fall. Sometime, someplace, it will happen, so be prepared! Save your bike before it happens.

SW-Motech makes some of the finest protection equipment available. The set-up for the Twin is available in a standard black powder coating or a semi-polished Stainless-Steel tubing. Both sets will protect the vital components of your motorcycle as well as you from damage incurred during a fall, slide or crash. They will preserve the frame, radiator, bodywork and other critical components from touching down with robust tubular steel. The black kit uses 27/21 mm tubing while the Stainless uses straight 22 mm tubing throughout.

Both configurations have a tight fit for great ground clearance and are designed to work seamlessly with other SW-Motech products like their Skid Plate/Engine Guard and SW-Motech Hawk light mounts. Three secure mounting points per side provide the necessary support that make these so strong. There is no drilling, cutting, welding or any other modifications required for mounting but still allows access to the oil filler, tool box and battery. Kit includes all necessary hardware and instructions and an aluminum cover to replace the OEM plastic cover at the lower mounting point on the left side.

Please Note that these Crash Bars are also compatible with the SW-Motech Skid Plate and the SW-Motech Centerstand.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Engine Crash Bars, Upper Givi

Africa Twin (CRF1000L) '16 - '21
Choose Type
$225.95

Givi makes a great set of Crash Bars available for the Africa Twin. If your intentions include off-road riding of any kind, you really should not go without protection. Not only for you, but for your bike too. Even a slow-speed tip-over can cause damage that would make riding away impossible.

For the upper set, you just need to select the matching color to the lowers you have ordered. Install them all at once, or the lowers alone for a while, then the uppers. You cannot order the uppers without the lowers though as they will no mount correctly. The upper crash bars protect important radiators and bodywork. Essential in the event of any kind of crash. These also make excellent mounts for auxiliary lights for added visibility.

Included with each piece you receive a complete set of instructions and all mounting hardware required, in typical Givi fashion.

NOTE: The upper units REQUIRE the lower crash guards for proper mounting and are not a stand alone item!

Please Note that these Crash Bars are also compatible with the Givi Skid Plate.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in Australia

Radiator Guard, B&B Off Road Engineering

Africa Twin (CRF1000L) '16 - '21
Choose Finish
$192.95

B&B Off Road Engineering Radiator Guards are much stronger than the plastic OEM guards. Made from extruded aluminum and then CNC machined, these guards us a louver design like those of a modern motocross machine which provides maximum protection while allowing maximum airflow through the radiator for excellent cooling.

With the mounting system for these guards, they are easily and quickly removed if you need to get in for a good cleaning. Remove four easily accessible bolts and the guards are out of the way.

Thumbnail

 WILL NOT FIT WITH SW-MOTECH UPPER TANK BARS! Modifications will be needed to fit with the crossbar of the crash bar that runs in front of the radiator.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguard Kit - Aluminum, Barkbusters

Africa Twin (CRF1000L) '16 - '21
$104.95

Protect your motorcycle's levers from damage during an impact with the solid protection offered by Barkbusters aluminum bar lever protection handguards. Constructed with solid, heat treated aluminum backbones, these hand protectors use a two point mounting system that provides strength to withstand plenty of force. Motorcycle handguards by Barkbusters with their full wrap design, will help keep your levers operational and your ride from coming to a premature end in the event of a drop or other mishap.

Features:

  • Two mounting points provide secure protection
  • Full wrap guards
  • Heat treated aluminum backbone bars
  • Easy installation
  • Compatible with all Barkbusters deflector guards (not included)
Thumbnail

  Add Plastic Handguards for a complete kit.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguard Kit, Barkbusters BBZ Fabric

$99.95

Extend your comfortable riding season with Barkbusters BBZ cold weather protection handguards. Designed to fit with or without existing Barkbusters backbones or handlebar weights, these guards offer superb wind protection without limiting access to your grips or controls. Simple to install, they can be mounted or removed within ten minutes without permanent modifications. Ride with less bulky gloves in colder weather with the Barkbusters BBZ cold weather protection handguards.

Features:

  • Fits most motorcycle handlebars
  • Maximum cold weather protection
  • Compatable with or without Barkbusters backbones
  • Lined with waterproof membrane
  • Windproof
  • Full wrap design
  • Allows full access of controls
  • Does not block view of handlebar thumb controls
  • Simple to install and remove

Whats in the box:

  • Two BBZ cold weather handguards
  • Mounting hardware
  • Instructions
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards Kit, Moose

Choose Handguard
$67.95

Contoured alloy hand guards with inner mounts, allow space for the clutch cable and brake hose.

Images show a set of these hand guards installed on a set of CR High Gunmetal Fly Handlebars with large black deflectors. The far right image shows the need to flip the brackets that attach to the bar on the clutch and front brake side. On the front brake side the clamp must go over the front brake line while on the clutch side it goes under the cable.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Acerbis X-Factor

$139.95

These handguards come with mounts that will work on both standard and and oversize bars. The aluminum wrap-around bar is the biggest on the market with two large plastic shields that are also some of the largest available. The X-Factor hand guards offer great protection from the elements, especially during those colder months when you're trying to stretch out your riding season.

Works with 7/8" or 1-1/8" bars.

Thumbnail

  X-Factor guards require you to cut your lever ends down, or use short levers.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Acerbis X-Factor Replacement Plastics

$22.95

Replacement handguards for your Acerbis set up. Tough Polypropylene shields with a larger 6" outer diameter, built for extreme riding conditions.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Barkbusters STORM Kit for 7/8" or 1 1/8" Tapered Bars

Choose Kit
Add Barkbuster Indicator Lights
Add Resistor Set
$119.95

Protect your hands and levers with the Barkbusters Storm lever and weather protection handguards. Full wrap solid heat treated aluminum bars with secure two point mounts on each side provide strength while attractive and generous guards provide shelter from the wind and weather. Ride longer with the Storm handguards and complete mounting kit by Barkbusters.

Features:

  • Two mounting points provide secure protection
  • Full wrap guards
  • Heat treated aluminum backbone bars
  • Easy installation
  • Tough and weather shielding Storm handguards
  • Aluminum backbones are compatible with all Barkbusters deflector guards

What's in the box:

  • Left and right aluminum backbone bars
  • Inner and outer handlebar mounting hardware for both sides
  • Left and right Storm plastic handguard deflectors
  • Installation instructions
Thumbnail

  Not recommended for Africa Twin, T7, Himalayan, or V-Strom.  Please see specific listings for those models.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Barkbusters VPS Kit for 7/8" or 1 1/8" Tapered Bars

Add Barkbuster Indicator Lights
Add Resistor Set
$116.95

Keep your hands and controls protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Heat treated aluminum backbones with two mounting points of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors, available in multiple colors, provide protection for your hands from the wind and brush. Ride longer, more comfortably with Barkbusters VPS lever and wind protection handguards

Features:

  • Two mounting points provide secure protection
  • Full wrap guards
  • Heat treated aluminum backbone bars
  • Includes VPS left and right plastic deflectors
  • Easy installation

What's in the box:

  • Left and right aluminum backbone bars
  • Inner and outer handlebar mounting hardware for both sides
  • Left and right VPS plastic deflectors
  • VPS deflector fastening hardware
  • Left and right adjustable position wind extension deflectors
  • Installation instructions
Thumbnail

 Not recommended for Africa Twin, T7, Himalayan, or V-Strom.  Please see specific listings for those models.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Barkbusters VPS Replacement Plastics

$36.95

Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Cycra ProBend

$129.95

Construction of these handguards feature heavy duty aluminum guards with colored plastic deflector shields. They offer great protection from those trees that jump out at you on the trail and the cold wind and rain you encounter on the street. They feature a deep bend on the outer bar end for maximum freedom of hand placement and high quality bar mounts on the inside.

Select your desired color with the corresponding size mounts to fit your handlebar.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Cycra ProBend Replacement Plastics

$21.95

Replacement handguards for your Cycra set up. Injection-molded high-impact plastic replacements. Includes all hardware needed for mounting.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Deflectors Moose

$24.95

Fits Moose and other aluminum hand guards

  • Aerodynamic and stylish design
  • Protect hands from brush, water and cold wind
  • Simple installation
  • Sold in pairs
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Handguards, Enduro ¾ Grip Mitt - OBR ADV Gear

$74.99

The OBR ADV Gear Enduro ¾ Grip Mitt is your answer to cold fingers! Our ¾ open design terminates right at the wrist, but still offers full coverage of the hand while blocking the swirling air flow that freezes finger tips. Their ¾ open design does not cover important controls such as Hi/Lo Beam, Turn Indicator, or Kill Switches making this Grip Mitt perfect for both Off Road, Enduro, ADV, and ATV applications with full wrap hand guards.

Features

  • High strength and water resistant 1680d Ballistic Nylon construction 
  • Universal easy on/off Velcro snap strap attachment system
  • Reflective Front Strip for High Visibility
  • ¾ Open design provides full coverage of the hand while not impeding controls
  • Works with OEM and Full Shield (Cycra/Trackside) style hand guards (Hand guard system required for attachment)
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Molded Foam Moose

$30.95

Extra protection in bad weather to help keep your hands warm and dry. These nearly double the protection from most plastic type deflectors.

The outer shell is made from heavy-duty 500-denier nylon with 1/2" closed cell foam to keep the wind, cold and rain off of your hands.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, PowerMadd Fuzion

Choose Type
$44.95

FUZION guard feature the ultimate in hand protection with a unique design and flexible yet durable material. The expanded coverage area sweeps back toward your hand significantly increasing coverage making it perfect for cold, muddy or wet conditions. The FUZION features a unique two position mount and is constructed of molded light-weight closed-cell AEPE foam, which is crush-proof, water proof and extremely durable. The FUZION will work great for road of offroad riding, where wind deflection is important, and or bouncing off trees is a common occurrence.

Controls

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebars, ADV ProTaper

Africa Twin (CRF1000L) '16 - '21
Choose Bend
$99.95

ProTaper's ADV handlebars give you a bar taller than most with extra space on the control portion of the bar. These bars provide an additional 20mm of space next to where your levers and throttle are located for your GPS, phone cradle, auxiliary switches, etc . They come in Adventure (which is taller than stock) and Adventure High (which is even taller).

These  are oversize bars, which means they are are 1 1/8", not the smaller 7/8" diameter. Therefore some bikes will require a adapter and there are several available to select from.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebars, Aero Fly Racing

$79.95

Comfortable Oversize (or Fat Bar) Handlebars. For bikes with standard 7/8" handlebars these will require the use of a 7/8 to 1-1/8  adapter. Grey in color. Raise your bars and get rid of the crossbar that obstructs your view of the speedo. Works with stock controls and cables.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebars, Fly Racing

$41.95

These handlebars are high quality at an affordable price. Several bikes here in the shop use these bars and we like them.

  • 7/8" mounting area, fits stock mounts
  • Manufactured from 6061 T-6 aircraft grade aluminum
  • Knurled center section and clutch end
  • Bar pad is included
  • Reduces rider fatigue by absorbing impact, shock and vibration
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebars, SE ATV High ProTaper

$69.95

These 7/8" bars fit in the stock clamps and raise your grips a couple inches. They look great too!

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Smart Bar for Electronics, Givi

Africa Twin (CRF1000L) '16 - '21
Add Givi Fit kit
$149.95

Givi Smart bar for attachment of electronics.

Bike specific mounting hardware (sold separately) required.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebar Riser, 2" Powermadd

Choose Bar Size
$59.95
  • 4.75" wide,
  • Requires 7/8" bar clamps on bike
  • Raises handlebars 2 inches and allows fore/aft position adjustment
  • Provides dual pivot points for optimal bar positioning
  • One piece design is made from solid aluminum for superior strength
  • Available for 7/8" - 7/8" or 7/8" - 1 1/8" bars