Voting is now open for the 2025 calendar photo contest. Click here to vote for your favorite!
This product has been designed to fit the Yamaha T7 Ténéré
This kit will give you 80mm of adjustment over the stock screen.
In the raised position, the difference in ride comfort is remarkable. Wind noise reduction is very noticeable and airflow underneath your screen reduced the vacuum effect, creating smoother airflow and reducing turbulence.
In the lowered position, the screen sits at the same height as stock.
To adjust the screen, loosen the thumb nuts, slide into position and re-tighten the thumb nuts, no tools required.
Standard Floating Wave® Rotor
Full floating to ensure optimum brake pad-to-rotor contact. Every high-quality, Galfer-patented Wave® rotor is made from a proprietary mix of virgin high carbon 420 stainless steel, laser cut (never stamped), double disc-parallel ground to assure perfect parallel flatness and heat treated to each specific application. KBA and TUV approved. Seamlessly replaces stock rotor. Full instructions provided along with any technical help needed.
B&B Off Roads KLX230R bash plate is made from 4mm aluminium 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.
The X-Grip is a frame guard that allows the rider to both protect the frame of the motorcycle from wear as well as adding more grip to the bike. Made from a dual injected mold; The outer plastic is durable polycarbonate while the inner plastic is durable yet playable and offers incredible grip.
Features:
- Protects the frame in the maximum friction area
- Use of rubber to increase grip and therefore control of the motorcycle
- Easy assembly and dismantling with expander and plastic bands
Available in 2 colors
Sold in pairs, the 2020 Rocky Mountain Expedition Motorcycle Saddle Bags WP (Welded Product) are a combination of the previous Rocky Mountain and Expedition Saddlebags.
- This great set of motorcycle luggage is 100% waterproof!
- Waterproof RF-welded seam construction.
- Construction and materials resist water, mud and dust.
- Quickly mounts to a huge number of racks thanks to the G-Hook Mounting.
- Compatible with their other waterproof motorcycle luggage too.
- Carry up to 64 liters of gear in these bags.
The Rocky Mountain Expedition motorcycle saddlebags are completely constructed from Radio Frequency Welded seams out of Custom 840d TPU with a black exterior, bright yellow interior. A full 30+ liters each, a secure and simple G-Hook mounting and compression system keep these motorcycle saddlebags in place on virtually any side rack. Internal stiffeners, held in sleeves, secure the load making them almost rigid and firm, not floppy. Flexi-Side Panels allow both smaller and larger loads to be compressed securely. They've added a grab handle on each motorcycle saddlebag. D-rings on the top and front of each bag allow easy attachment of a Small or Medium Rolie Bag as a top bag for even more capacity or just for convenience. Or add a Bottle Holster for fuel or water.
Dimensions:
- Length: 15" / 38cm
- Width: 8" / 20cm
- Height: 15"-17" / 38cm-43cm depending on amount of roll
Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready!
This is the ENDURO Series DR650 rear rack which measures 10 inches wide and 12 inches long.
- Great for carrying cargo, duffel bags/backpacks, and mounting Pelican, Seahorse, or any other hard cases. Givi compatible.
- Holes are in place to accept Rotopax mount with no drilling required.
- Stainless steel mounting hardware and instructions included.
- Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
- Weighs 3 lbs, 10 inches wide, 12 inches long.
- Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
- Rear rack only, no Rotopax mount or side racks included.
Our ProCycle top rack is designed and manufactured by dual sport riders that know what it takes to create a durable and versatile luggage rack.
Our racks allow for easy installation of both soft and hard luggage.
- 5/8" steel tubing
- Computer precision bending
- Durable powder coat finish
- CNC cut brackets
- Top rack dimensions 15" wide 11" long
- Top rack has RotoPax and hard case mounting tabs
- All mounting hardware included.
Top rack only, side racks sold separate.
The ProCycle side rack is designed and manufactured by dual sport riders that know what it takes to create a durable and versatile luggage rack.
Our racks allow for easy installation of both soft and hard luggage.
Side racks only, top rack sold separate.
Compatible with the following top racks:
- ProCycle
- Pro Moto Billet
- Pat Walsh
- Nomadic
- TCI Borrego
- Stock Suzuki (must grind 1/8" off inside of frame mounts)
ProCycle rack installation requires removal of the stock grab bars. Turn signal brackets will be needed if using a top rack that doesn't offer turn signal mounting holes.
Construction
- 5/8" steel tubing
- Computer precision bending
- Durable powder coat finish
- CNC cut brackets
- All mounting hardware included
- Great for carrying cargo, duffel bags/backpacks, and mounting Pelican, Seahorse, or any other hard cases. Givi compatible.
- Holes are in place to accept Rotopax mount with no drilling required.
- Stainless steel mounting hardware and instructions included.
- Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
- Weighs 3 lbs, 10 inches wide, 12 inches long.
- Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
- Rear rack only, no Rotopax mount or side racks included.
Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series CRF300L rear rack which measures 10 inches wide and 12 inches long.
Easy to Install
- Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
- Holes are in place to accept Rotopax mount with no drilling required.
- Stainless steel mounting hardware and instructions included.
- Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
- Weighs 3 lbs, 10 inches wide, 12 inches long.
- Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
- Rear rack only, no Rotopax mount or side racks included.
Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series KLX230 rear rack which measures 10 inches wide and 12 inches long.
Easy to Install
- Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
- Holes are in place to accept Rotopax mount with no drilling required.
- Stainless steel mounting hardware and instructions included.
- Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
- Weighs 3 lbs, 10 inches wide, 12 inches long.
- Works with stock tool bag. This requires an extra hardware kit available for free by request only.
- Rear rack only, no Rotopax mount or side racks included.
Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series XT225 Serow rear rack which measures 10 inches wide and 12 inches long.
Easy to Install
- Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
- Holes are in place to accept Rotopax mount with no drilling required.
- Stainless steel mounting hardware and instructions included.
- Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
- Weighs 3 lbs, 10 inches wide, 12 inches long.
- Works with stock tool bag. This requires an extra hardware kit available for free by request only.
- Rear rack only, no Rotopax mount or side racks included.
Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series CRF450L rear rack which measures 10 inches wide and 12 inches long.
Easy to Install
- Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
- Holes are in place to accept Rotopax mount with no drilling required.
- Stainless steel mounting hardware and instructions included.
- Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
- Weighs 3 lbs, 10 inches wide, 12 inches long.
- Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
- Rear rack only, no Rotopax mount or side racks included.
A versatile performer with a tough nylon carcass and raised dimpled knobs that work well in a variety of terrain.
Features:
- Narrow knobby configuration means less of an environmental foot print on the trail
- 4 ply rated
- DOT approved
- Not intended for extended highway use
- All sizes will work for front or rear fitment
- “GOLDEN BOY”
This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature.
It is an easy install and will allow you to strap your cooler, lunch box, tools, or whatever on the back of your new Yamaha.
Comes complete with all hardware and easy install instructions.
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range.
Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan.
Width: | 8" (widest point located in the rear seating area) |
Height: | Same as OEM |
Width: | 8" (widest point located in the rear seating area) |
Height: | 1" (25mm) Taller than stock |
Our latest casual t-shirt with a classic ProCycle Logo on the front and a topo map of our favorite local riding spot on the back. High quality soft t-shirt perfect for everyday wear.
T-Shirt Specs:
- Retail fit
- Tear-away label
- Side seamed
- Shoulder taping
- Black Heather: 4.2-ounce, 90/10 Airlume combed and ring spun cotton/poly, 32 singles
- Heather True Royal and Heather Dust: 52/48 Airlume combed and ring spun cotton/poly
Voyager is the original Trail Tech off-road GPS, designed specifically to meet the needs of off-road riders. With Voyager you can download, record, and share maps while recording vital engine data. The 2.7 inch TFT backlit display is ideal for viewing in any environment and gets easier to read in direct sunlight.
Trail Tech provides a one year warranty and unlimited free phone and email support.
- GPS enabled, active compass, elevation readings, distance and the ability to record ride data to SD card
- Speedometer and tachometer readings in real time, shows current and total ride time and battery voltage
- The 400x240 WQVGA LCD map screen is monochrome, displaying maps in black and white.
- Plan routes on the web, then import to Voyager as gray routes ready to ride.
- As a new track is recording, a black line appears indicating where you have been.
- Voyager integrates with your vehicle using standard Trail Tech vehicle sensors, providing vital ride gauges such as engine temperature, RPM, battery voltage, speed/distance, and more.
- At only 4.5 x 2.5 inches, Voyager is a great choice for many types of vehicles from adventure bikes to quads, UTVs and dirt bikes.
- 12V DC power required, make sure your vehicle has a battery.
Voyager Pro, The Connected Rider’s GPS. Trail Tech offers a variety of model specific and universal kits for complete vehicle integration. All kits include mounting hardware, tach sensor, and power connection. Temperature and wheel sensors vary by kit, see kit contents for details. Adventure Begins Here!
Trail Tech provides a one year warranty and unlimited free phone and email support.
- Trail Tech Voyager Pro, the Connected Rider’s GPS. A premium off-road GPS with 4 inch color touchscreen anti-glare display, sealed and rated IP67 for anti dust/water intrusion
- The map screen is enabled with base maps, topography lines, hill shading, and some trails. Record or load GPX trails and riding areas, and transfer to a PC using the MicroSD card. Voyager Pro comes loaded with North American maps, but other map regions can be downloaded for free.
- Amongst the major features is Buddy Tracking. Buddy Tracking uses localized radio signals and can support up to 20 riders in a single group. View members of your ride group on the map screen in real time, increase your following distances, and use the buddy beacon to summon your buddies. Cell reception is not required.
- Buddy tracking displays the current location of up to 20 members of your ride group on the map screen
- Voyager Pro is Bluetooth enabled for intercom, phone and media controls. Play songs from your phone or MicroSD card using a Bluetooth headset, speaker, or intercom. Two phones and two headsets can be connected at the same time.
- The 4 inch glove friendly color touchscreen TFT display is visible in all conditions, including direct sunlight. Sealed and rated IP67 for anti-dust and water intrusion, it is built to withstand the harshest elements that come with extreme riding conditions. The mounting dock hard mounts to the dashboard, can be locked, and allows for quick removal of Voyager Pro from the machine. The dock utilizes the AMPs hole pattern, and is compatible with the full line of RAM brand mounts or Trail Tech mounting hardware.
- Voyager Pro integrates with your vehicle using standard Trail Tech vehicle sensors, providing vital ride data such as engine temperature, RPM, battery voltage, speed/distance and more.
- At 5.6 x 3.5 inches, Voyager Pro still fits on dirt bike dashboards, but is big enough to use on adventure bikes and UTVs. Voyager Pro’s mapping abilities and buddy tracking make it the premium choice for off-road riders.
Designed to enhance the appearance of your motorcycle, yet provide greater riding distance per tankful. Larger capacity than stock, yet very slim and sleek. Perfect for wherever your adventure takes you! This tank is made from POLYETHYLENE CROSSLINK for extra strength and durability.
DOES NOT FIT NEW KLX300 "R" Models
The Warp9 oversized front brake rotor kit for the TW200 has amazing brake Performance. This high quality oversized rotor is laser-cut from high-carbon content 410 stainless steel then lap cross hatch ground and heat-treated. Finally, high-temp paint is applied to surfaces like cooling holes and edges to provide a clean, finished look.
Includes a billet caliper relocation bracket that is easy to install, and a fresh set of brake rotor bolts.
*Add the Galfer steel braided brake line for the ultimate braking performance.
This is the ultimate headlight upgrade for your XT250! It’s a plug & play kit which includes the newly released Morimoto round headlight with preassembled aim adjustable mounting bracket set. Installation takes five minutes and the light output is phenomenal.
Low Beam: 2,400 Lumens, 20 Watts
High Beam: 4,300 Lumens, 35 Watts
Color Temperature: 5,000K
Warranty: 5 Years
These Cogent Drop-in Dynamic Cartridges will vastly improve both the compression and rebound damping of your stock forks. These units have been given the seal of approval by the ProCycle staff for both performance and ease of installation. No disassembly of your forks, no drilling of damper rods. Just change the oil over to 5w and install the DDCs under the springs and hit the trails.
DDC Tool will not work with this spring series
When upgrading your Suzuki DR650 with LED turn signals, it's required to install a diode module to prevent all of the signals from blinking at once regardless of left or right signal activation. Some riders choose to splice and solder their own solution, but we like things plug and play. That means all you have to do is plug in the TST kit and you're done! There's no need to cut or splice your OEM wiring harness or break out the soldering iron and electrical tape.
- Plug and play installation - meaning no cutting, splicing, or soldering
- Eliminates issue of all signals blinking when activating only one side of turn signals
- Enables power to flow in single direction from LED turn signals to the dash indicator
- Does not fix hyperflash (LED turn signals flashing faster than OEM specified rate)
- (1) TST Plug and Play Diode Module
- 1 Year Warranty
If you just installed aftermarket LED turn signals or an LED integrated tail light and your turn signals are flashing way too fast, or perhaps simply staying on completely, you're at the right place to find the solution! The TST Gen2-SK LED Flasher Relay fixes what we call "hyperflash". It slows the flash rate down to a pre-set 85 cycles per minute but can be sped up or slowed down using the adjustment dial located within the unit so you can get the exact speed you are looking for. The plug-and-play installation means that you don't need to splice in any load balancing resistors that generate unnecessary heat and require splicing into your stock wires. Simply remove the stock relay and install your new TST relay and your wiring job is done. It's that simple!
- Slows turn signal flash rate down to an adjustable 85 cycles per minute when turn signals are experiencing hyperflash or stay on continuously
- Adjustable turn signal flash rate enables you to speed up or slow down the flash rate to fit your preference
- Plug and play installation meaning no cutting, splicing, or soldering
- Replaces the stock relay and fits like OEM
- No need for cumbersome and heat-generating load balancing resistors
- Flexible relay housing enables easy access to the flash rate adjustment dial inside of the relay unit
Please make sure your bike uses a 2-pin relay for the signaling system. If your bike has hazard lights it may need the 4-pin relay. Please also note the pin configuration and make sure it matches what is on your bike. It is very important to verify fitment before making your purchase.
We start with an Excel rim, OEM hub, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike. Upgrade to SUN rims available in 3 colors.
Our pro shop then laces and trues your wheel to perfection, giving you the highest quality custom wheel available.
- New OEM hub with bearings and seals installed
- 2.50" x 19" Adventure (Sun rims are 2.75")
- 2.50" x 18" Street
- 3.50" x 17" Supermoto
Add a tire to your wheel order and we will throw in a tube and mount and balance it at no additional charge.
Please allow 2-3 weeks for delivery.
Cannot be canceled.
MAGURA HYMEC – AN EASY TO INSTALL ALTERNATIVE TO A MECHANICAL CLUTCH.
This system replaces the clutch lever and cable – with a small lightweight hydraulic system for improved clutch control. The Hymec ensures an easier operating pressure, a constant pressure point, no more cable adjustment and smooth clutch actuation to ensure the perfect take-off every time. Hymec significantly improves vehicle performance – it allows the user to feel the point where the clutch releases and actuates. This product has been developed over many years and been tested under the toughest conditions possible in the world of motorcycle off-road sport. It has been used by world champion riders who all agree as to the benefits but it is just as useful to the complete novice who stalls at the traffic lights.
- This system replaces the clutch lever and cable – with a small lightweight hydraulic system for improved clutch control
- Up to 20% less clutch pull
- No maintenance and self-adjusting
- Smooth hydraulic feel with clear and consistent pressure point
- Operates on mineral oil which doesn't draw moisture and won't harm paint or finish
- Forged break-away lever blade with reach adjust is ready to mount
- Clutch safety switch included
Moto Max Kit With R1 Digital Radio - Helmet Kit, Harness, and Handlebar Push-To-Talk
Designed for racers, by racers. The MOTO-MAX is manufactured to strict standards and made to take you to the podium.
With heavy electrical shielding, genuine Nexus Military-grade connectors and a handlebar-mounted Push-To-Talk button, this race kit offers no-compromise communications and full operation without ever having to take your hands off the bars or the finish.
MOTO-MAX is the go-to for racers and hardcore riders
Compatibility:
This radio works with all VHF/UHF business band radios operating on the same frequencies, as well as digital radios using the DMR platform. Radio models include, but are not limited to: R1, RDM-DB, M1, RDH-X, V3, RM60, RH5R, RDH16, as well as Icom, Motorola, Kenwood business band radios, and more.
Business License is required. Click here to learn more.
Kit Includes:
- Motorcycle Harness
- Helmet Kit with audio input
- Aux cable
- Quick-Release Push-To-Talk Button
- R1 Handheld Radio
Walkie-talkie compatibility keeps you connected to friends and family on the trails! The MOTO-MAX kit is manufactured to strict standards and made to take on extreme offroad environments.
With heavy electrical shielding, genuine Nexus Military-grade connectors and a handlebar-mounted Push-To-Talk button, this race kit offers no-compromise communications and full operation without ever having to take your hands off the bars or the trail.
MOTO-MAX is the go-to communication solution for hardcore riders.
Compatibility:
Works with all GMRS/FRS radios operating on the same frequencies, including but not limited to GMR45, GMR25, GMR2, and more.
Business License is required. Click here to learn more.
Kit Includes:
- Motorcycle Harness
- Helmet Kit with audio input
- Aux cable
- Quick-Release Push-To-Talk Button
- GMR2 Handheld Radio
Designed for racers, by racers. The MOTO-MAX is manufactured to strict standards and made to take you to the podium!
With heavy electrical shielding, genuine Nexus Military-grade connectors and a handlebar-mounted Push-To-Talk button, this race kit offers no-compromise communications and full operation without ever having to take your hands off the bars or the finish.
MOTO-MAX is the go-to for racers and hardcore riders
Compatibility:
This radio works with all VHF/UHF business band radios operating on the same frequencies. Radio models include, but are not limited to: R1, RDM-DB, M1, RDH-X, V3, RM60, RH5R, RDH16, as well as Icom, Motorola, Kenwood business band radios, and more.
Business License is required. Click here to learn more.
Kit Includes:
- Motorcycle Harness
- Helmet Kit with audio input
- Aux cable
- Quick-Release Push-To-Talk Button
- V3 Handheld Radio
Ballistic nylon padded construction absorbs vibration and shock protecting your radio from abuse. The updated design is longer now, to accommodate our radios with extended batteries. Each bag also comes with a foam block to properly position radios without extended batteries. Zipper top closure keeps the radio secure.
- Ballistic nylon construction
- Shock-absorbing padding
- Includes foam block to adjust for different radio heights
- Quick Velcro mounting
The Rugged Radios bag is built to perform in tough environments.
Fits: R1, RDH-X, V3, RH5R
Does not include handheld radio.
Adventure on the Weekend with the Rugged Connect BT2 Moto Kit!
The Rugged Connect BT2 uses the latest Bluetooth technology that quickly and easily connects to your phone for incredible music streaming, convenient GPS navigation, and seamless phone call conversations. This kit pairs the Rugged Connect BT2 with our SUPER SPORT Moto Kit allowing you to talk for miles at the push of a button.
No pairing. No cell service. No mesh network - no problem!
Connectivity For Miles
Using our powerful, compact, walkie-talkie compatible handheld radios, you can connect an unlimited number of riders and reliably communicate 1-3 miles or more - well beyond the range of any current Bluetooth models available!
Simply Turn On & Talk To Others
Simply put your radios on the same channel and start talking. No pairing is necessary, no mesh network is used, and even if the Bluetooth headset runs out of battery our proprietary design allows you to continue to talk through your handheld radio. Spend less time getting setup and more time riding!
This kit includes a GMR2, GMRS handheld radio, which has an optimized transmitter with tuned antenna providing long range performance
Compatibility: Works with all GMRS and FRS radios operating on the same channels, including Rugged GMR45, GMR25, and GMR2. Also works with all GMRS radios from other manufacturers including Motorola, Midland, Uniden, and many more.
Kit Includes:
- Rugged Connect BT2 Bluetooth Headset
- GMR2 Rugged GMRS handheld radio
- Super Sport Lightweight motorcycle harness
- Handlebar mount Push-To-Talk button
- BT2 to Radio connection jumper
Replace your motorcycle’s windscreen with PUIG’s touring windscreen. Manufactured in acrylic of 3-4 mm according to the motorcycle model to guarantee maximum protection from the wind, improving the aerodynamics of the piece and possible debris that may impact you during your ride.
In addition, it comes with a variable visor that will redirect the wind even more while achieving a great sense of comfort on board your machine. This visor is fixed to the touring windscreen by screws, since the screen comes with the holes already made to facilitate assembly.
The windshield has a rounded contour of> = 2mm, complying with the TÜV regulations.
This part is only available in smoked finish.
For assembly, PUIG provides instructions with mounting tips, so you can quickly enjoy the touring windscreen on your motorcycle.
- Includes the lower shock bearing and all other parts necessary to rebuild the suspension linkage
- 52100 bearing steel and hard-plated spacers resist wear and rust
- Each kit includes the lower shock bearing, all the shafts, seals and spacers in the link, link arm and lower shock mount
Kit Contents: | |
---|---|
Seal | 8 |
Needle Bearing Shaft | 4 |
Needle Bearing | 7 |
FUNCTION:
- Highly resistant protection of the engine covers against stone strikes and damage from falls or impacts when handling the bike.
- Impact-absorbing rubber inserts positioned to cushion the contact between part and engine cover
- Perfect shape to perfectly fit your T7.
- Small gap between standard cover and protection
- Rubber inserts allow a more even force distribution
- High-quality hardware
- Rubber inserts are resistant to high temperatures
TECHNOLOGY:
- Highly resistant plastic polymer to protect against falls and impacts
- Over-injected metal part strategically positioned to enhance protection in the event of a crash
- High-quality precision manufacture with over-injected impact-absorbing rubber inserts and over-injected stainless-steel insert
OTHER FEATURES:
- Mounting kit included
- Fast and easy installation and removal
- Engraved metallic part with Polisport logo
- Texturized surface for a premium look
- Minimal design to blend into motorcycle look
- Developed and made in Europe
PACKAGING & PARTS INCLUDED:
- Packed in recycled carton box
- Includes one Clutch and Alternator Cover Protector
- Includes all material needed for an easy installation
- Protect vital engine parts and cases from rocks and debris
- Clear anodized for corrosion protection and good looks
- Skid plates made from 3/16" 5052 H-32 aluminum
- Smooth underside won't snag when crossing logs
- Oil drain hole on all required models
- Heat-treated chromoly steel clamps keep plates mounted securely
- All mounting hardware included
Transform your ride
MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.
What's included in the kit
Our complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.
- A set of MadStad adjustable brackets
- The acrylic windshield
Installation is super simple. Our bracket system attaches where the stock shield normally goes and our shield then attaches to the brackets. With the shield separated from the front of the bike you can pull lots of air underneath it which is critical for smooth comfortable wind protection. You still have a fairly compact shield but now the wind pressure on your head and face are gone, and you are still looking comfortably over the shield.
All MadStad windshields are made from 3/16" (4.5 mm) thick cast acrylic.
- Integrated shutoff valve allows precise amount of liquid to be dispensed
- Graduation marks for cubic centimeters, fluid ounces and premix ratio
- 1000 cc (34 oz) capacity
- Easy to understand premix ratio graduations for 32:1, 40:1, 50:1, and 60:1 for 1 to 3 gallons
- Adjustable ball-pivot spout allows easy, spill-free filling
- Top cover keeps dust and dirt out when not in use
- Magnet allows funnel to be stored conveniently on the side of your tool box
- Large molded handle for secure grip
- Reduced neck keeps funnel from dripping residue when funnel is laid on its side
Cycle Racks Bag Supports can used for many different Cycle Racks and can be used on either the front or rear rack.
When they developed these, they wanted a functional, yet "Easy On- Easy Off application. The pig tail hook goes up, over and underneath the bar of the rack, they can also be used upside down on the rear rack as side boards. To install them, wing them out, slide them in place and then wing them back down. Simply reverse the process to remove them.
Rok-Straps are supplied to secure them in place. They are pre-drilled to accept the pattern of the Roto-Pax Pack Mount (sold separately) so you can carry fuel or attach them to your own bags.
They are sold together in a set of one right support and one left support.
COLOR: Black
Features:
- Versatile, light and super compact chain tool for adventure touring and long distance trail riding
- 6061 billet aluminum body, complete tool weighs only 230 grams (8 oz)
- Will break 520, 525, and most 530 chains and master links (maximum link width of 20 mm)
- Included steel press plate for removing and installing clip style press-on master link plates
- Innovative dovetail closure provides ease of use and superior strength
- Hardened steel thread insert on body provides strength and durability
- Includes durable cloth pouch for easy transport on your adventure
- Requires use of a 12 mm and 14 mm wrenches (not included)
- Does not rivet master links.
- We recommend using the Motion Pro PBR Chain Tool if you have a rivet style master link
Transform your ride
MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.
What's included and what's not included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.
- Black hardened acrylic base plate and mounting hardware
- A set of MadStad adjustable brackets
- Rear support brackets
- The acrylic windshield
The MadStad adjustable brackets sit out in front of your fairing on black fly screen which attaches in place of the factory shield. With the windshield now separated from the front of the bike and the fly screen helping to deflect wind up from underneath, you have total control over the shield height, angle and airflow. This lets you dial in a smooth ride and quieter cockpit far better than any fixed windshield can provide.
- Increased tank 14L / 3.6 Gallons.
- Impact and abrasion-resistant.
- Ideal for both competition and long and short-distance tourism.
- Designed to maintain a narrow profile to ensure excellent driveability.
- Possibility of fitting cap with Acerbis key.
Included with the Tank:
- Acerbis cap
- Assembly kit
Designed to enhance the appearance of your motorcycle, yet provide greater riding distance per tankful. Larger capacity than stock, yet very slim and sleek. Perfect for the dunes or the race track! These tanks are made with POLYETHYLENE CROSSLINK for extra strength and durability.
- 2.5 gallon capacity
Does not fit Rally model
TechSpec’s Motorcycle Tank Grips were developed to improve body, bike control and increase riders comfort. Gripping your motorcycle between your knees or thighs improves overall control of your ride by better securing your body weight and seat position under the forces of braking, cornering and acceleration while also relieving pressure from your wrists, elbows, shoulders and lower back giving you increased control and a more comfortable, safer ride. Snake Skin is a thin, .125” medium durometer “rubber” material that offers a secure, comfortable grip, durable protection and a clean stock look.
This universal precut kit includes left and right tank grips. (8" X 3") Triangle
- Rear rack comes with grab bars, designed for specific models
- Flat surface with many fitting holes for cargo box and its box base installation
- Comes with loading hooks for secure luggage holding
- Can be used with GIVI universal box bases
- Maximum loading capacity is 5 kg / 11 LB
- Seal profile is engineered to create equal pressure in each seal lip; equalized seal pressure creates less drag and longer seal life
- Patented MAX-LIFE has a coefficient of friction up to 3 times less than the OEM seal material
- Triple-lip seal design
- Dyno-tested to last 3 to 4 times longer than OEM seals
- Directional ribs allow seal to be installed easily
- Kits include fork seals and dust wipers
The One-Piece Comfort seat is 11” wide and designed to improve weight distribution and support when seated while still allowing the rider to move freely when standing. Built to withstand the rigors of adventure riding, the T7 One-Piece Comfort seats are designed with the rider in mind.
Available in multiple cover options and three different heights: low, standard, and tall. Whether you have a 26” or 36” inseam, Seat Concepts has you covered.
Available as a complete seat only, including seat base.
Height: Same as stock.
Width: 11"
Width: | 11" (279mm) |
Height: | Same as stock |
Engineered with precision and hand crafted with premium materials including Seat Concepts’ proprietary foam formula, the 8” wide One-Piece Rally seat is designed to provide you with an open cockpit for increased mobility during technical riding.
Available as a complete seat only, including seat base.
Width: | 8" (203mm) |
Height: | Same as stock |
Engineered with precision and hand crafted with premium materials including Seat Concepts’ proprietary foam formula, the 8” wide One-Piece Rally Hard Adventure 2.0 seat is designed to provide you with an open cockpit for increased mobility during technical riding and traction ribs to help keep you planted.
Available as a complete seat only including seat base.
Width: | 8" (203mm) |
Height: | Same as OEM |
In the event of a crash or even just a dropped bike, these heavy-duty crash bars will prevent major damage.
The powder coated 1" steel tubing is bolted to the sub frame of the bike with two attachment points on each side, preventing them from rotating in the event of a low side.
The guards also feature aircraft grade aluminum plates that can be inexpensively replaced without needing to purchase a new set. Think of them as protection for your protection.
They use highest grade commercially available 12.9 (177,000 psi in tensile strength) wherever possible. Rest assured that you are getting the best material commercially available.
Most skid plates will require notching or modification to avoid interference.
Will not fit properly with oversized head pipes.
Keep it simple, light, tight and versatile with the updated Wolfman Unrack System. An E-base or B-Base (choose the right one for your bike size) supports multiple configurations of bags, so you’re always ready for your next ride. Maybe a single bag for a jaunt across town. Or all the bags you need for a week in the wild. Mix and match bags and accessories to suit your needs and then Go!
E-Base Unrack System for Enduro and smaller Dual Sport bikes. Base Only, does not include bags.
Afternoon dash on the local trail? Weekend dirt tour? Multi-day camping trip? Your luggage needs are always changing.
The Wolfman Unrack System gives you the ability to easily change your luggage to match your ride length, gear needs, and your style. The E-Base WP (Welded Product) provides the foundation. Three simple and easy mounting straps attach the E-Base to almost any Enduro or smaller Dual Sport bike. Then attach the motorcycle bags and accessories that match your ride. Try the water repellent Small Rolie Bags for shorter trips, or Medium Rolie Bags for longer more gear-intensive trips. Accessorize as needed with a Bottle Holster for fuel or water, a Pitkin Pole Bag for tent poles, or a Tincup Pocket to keep small items handy.
The E-Base will fit most Enduro bikes and smaller Dual Sport bikes, like Yamaha WR, and WR250R, Honda CRF Series, Suzuki DRZ 400, Kawasaki KLX 250, KTM EXC, EXC-W, Husky FE and TE Series.
Features:
- Uses their popular Rolie Bags for a versatile system
- No Side Racks needed
- Two-layer 840d TPU fabric with plastic in between for durability and stability
- Laser-cut webbing slots for increased bag stability and versatility
- 2” D-rings for multiple attachment points throughout
- 2” wide webbing for stability
- All high-stress areas are reinforced
- Designed in the USA and Made with Wolfman legendary care and quality
Dimensions:
- Fitment bike width 5”/ 12.7cm to 8”/ 20.5cm.
Weight:
- 2.9 lbs. / 1.3 kg.
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Available as a Foam and Cover Kit for OEM pan only.
Width: | 8.5" (216mm) |
Height: | Same as OEM |
96 page 5th Edition Sudco Mikuni Carburetor Manual featuring the complete line of Mikuni RM, VM, HSR, HS, TM, TMX and BN Carburetors and Fuel Pumps with Parts Breakdown Diagrams, available Tuning Components, Tuning and Setup information of all Mikuni Carburetors & Fuel Pumps for Dirt, Street and Personal Watercraft applications.
Great resource for the do it your self rider to get the most out your carburetor.
Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
The Complete Seat comes with an aftermarket pan with the foam and cover kit assembled, ready to ride.
Width: | 11 1/8" (283mm) |
Height: | Same as OEM |
- Seal profile is engineered to create equal pressure in each seal lip; equalized seal pressure creates less drag and longer seal life
- Patented MAX-LIFE has a coefficient of friction up to 3 times less than the OEM seal material
- Triple-lip seal design
- Dyno-tested to last 3 to 4 times longer than OEM seals
- Directional ribs allow seal to be installed easily
- Sold in Pairs
Finally a precision fabricated bolt-on swingarm extension for the TW200!
This kit provides a 3” stretch without having to cut and weld your motorcycle. Heavy duty steel construction with a silver metallic powder coated finish.
Includes mounting hardware and brake linkage extension.
Provides additional clearance for running larger ATV tires.
*Will require longer chain. Stock sprockets will need a 134 link chain.
CNC machined from 5mm aluminum 5083 plate with lots of slots to attach your Rok Straps (or other straps). This gives a considerably wider deck than the stock rack. Attaches directly to the stock rack with four screws that are included. Available in either polished aluminum or a black polymer coating.
These plates are pre-drilled making installation of a RotoPax mount quick and easy.
Dimensions
- Total Length: Approx 35cm / Flat Surface: Approx 35cm
- Total Width: Approx 39cm / Flat Surface: Approx 32cm
CNC machined from 5mm aluminum 5083 plate with lots of slots to attach your Rok Straps (or other straps). This gives a considerably wider deck than the stock rack. Attaches directly to the stock rack with four screws that are included. Available in either polished aluminum or a black polymer coating.
These plates are pre-drilled making installation of a RotoPax mount quick and easy.
Dimensions
- Total Length: Approx 35cm / Flat Surface: Approx 35cm
- Total Width: Approx 39cm / Flat Surface: Approx 32cm
This bash plate is made from 5mm aluminium 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.
- Fits with the Genuine Suzuki crash bars
- Designed only to fit with crash bars. Cannot be mounted without the Genuine suzuki crash bars installed
radiator stone guard is machined from 4mm aluminium 5083 plate. The extra thickness of material provides superior strength and protection against larger debri as well as small rocks etc. Radiator guards can be fitted in approx ½ hr or less using basic tools. All radiator guard mounting hardware is supplied where necessary.
This luggage rack is made from 5mm aluminium 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.
All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.
Luggage plates will come with pre-drilled holes to suit rotopax mount. On request luggage plates can be pre-drilled to suit Givi top case mounting hardware.
DIMENSIONS
- Total Length: Approx 33cm
- Total Width: Approx 33cm closest to seat, approx 27cm at rear
bash plate is made from 4mm aluminium 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.
All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.
Protect your frame/paint from scuffs and scratches with frame guards. The DR 250 & DR 350 frame guards are made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All frame guards are supplied with all necessary mountings and stainless bolts. With a polished finish they look great and are easy to install.
This Australian made bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.
All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.
Fits with SW Motech & Givi Crash bars.
B & B Off Roads Kawasaki KLR 650 master cylinder guard is made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All guards are supplied with all necessary mountings and stainless bolts. Made to cover and protects the rear brake master cylinder it looks great and is easy to install. Choose between polished or black polymer finish.
B&B Off Road's KLR650 Luggage Rack is made from 5mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.
DIMENSIONS
- Total Length: Approx 42cm
- Total Width: Approx 40cm
B&B Off Roads KTM 950 Super Enduro bash plate is made from 5mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.
B&B Off Roads KTM 950 & 990 Adventurer bash plate is made from 5mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.
B&B Off roads Ktm 950 and 990 adventurer master cylinder guard is made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All guards are supplied with all necessary mountings and stainless bolts. Made to cover and protects the rear brake master cylinder it looks great and is easy to install. Comes with polished finished.
The KTM 950 and 990 adventurer luggage Rack is made from 5mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.
All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.
DIMENSIONS
- Total Width Approx 35cm, Width of flat surface approx 31cm
- Length of flat surface approx 30cm
Our KTM 950 Super Enduro Luggage Rack is made from 5mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.
All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.
DIMENSIONS
- Total Width Approx 35cm, Width of flat surface approx 31cm
- Length of flat surface approx 30cm
Our KTM 950 Super Enduro Luggage Rack is CNC machined from 5mm aluminum 5083 structural plate.
All of our Carry racks & Luggage plate racks are supplied with the necessary mounting hardware needed for fitment.
- Available in Polished or Black
- Predrilled Rotopax mount holes (not pictured, more to come)
DIMENSIONS
- 250mm wide x 239mm long
ProCycle side panel guards to keep your saddlebags from fouling the side covers, gives an anchor point for soft saddle bags, and helps keep bags from being damaged by the exhaust.
Constructed from mild steel tubing that is powder coated black for nice long lasting good looks.
Our rack includes a custom sub-frame bracket that adds additional strength to allow for heavier luggage bags or cargo without long support arms or fear of damage to your TW sub-frame.
Comes with all necessary hardware: |
(2) M6x16 hex flange bolts |
Sub-frame bracket |
(2) M8x30 hex flange bolts |
(2) M8 nyloc nuts |
(2) M8 washers |
Side Cover Guards Only. Complete luggage system available HERE.
The ProCycle top rack is designed and manufactured by dual-sport riders who know what it takes to create a durable and versatile luggage rack.
Components are constructed from mild steel tubing that is powder coated black for corrosion resistance and long-lasting good looks. Designed and manufactured locally in Oregon.
Our rack includes a custom sub-frame bracket that adds additional strength to allow for heavier luggage bags or cargo without long support arms or fear of damage to your TW sub-frame.
Multiple mounting points for various luggage and strap options. Includes a mounting point for a rotopax mount (not included).
Top rack is 15in wide by 11in from front to back.
Comes with necessary hardware and |
sub frame bracket: (2) M6x16 hex flange bolts |
(2) M8x60 hex flange bolts | (2) M6X16 hex flange bolts |
(2) M8 nyloc nuts | (2) M6 nyloc nuts |
(2) M8 washers | (2) M6 washers |
(2) 1 5/8" long custom spacers | (2) Rear turn signal brackets |
Top Rack Only. Complete luggage system available HERE.
The ProCycle rack system is designed and manufactured by dual-sport riders who know what it takes to create a durable and versatile luggage rack.
Components are constructed from mild steel tubing that is powder coated black for corrosion resistance and long-lasting good looks. Designed and manufactured locally in Oregon.
Our rack includes a custom sub-frame bracket that adds additional strength to allow for heavier luggage bags or cargo without long support arms or fear of damage to your TW sub-frame.
Multiple mounting points for various luggage and strap options. Top rack includes a mounting point for a rotopax mount (not included). Side panel guards keep your saddlebags from fouling the side covers, gives an anchor point for soft saddle bags, and helps keep bags from being damaged by the exhaust.
Top rack is 15in wide by 11in from front to back.
This set includes the ProCycle Top Rack, Side Panel Guards, and sub frame bracket:
Comes with necessary hardware and |
sub frame bracket: (2) M6x16 hex flange bolts |
(2) M8x60 hex flange bolts | (2) M6X16 hex flange bolts |
(2) M8 nyloc nuts | (2) M6 nyloc nuts |
(2) M8 washers | (2) M6 washers |
(2) 1 5/8" long custom spacers | (2) Rear turn signal brackets |
(2) M8x30 hex flange bolts | (2) M8 nyloc nuts |
(2) M8 washers |
Protect your frame/paint from scuffs and scratches with frame guards. The CR80 & CR85 frame guards are made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All frame guards are supplied with all necessary mountings and stainless bolts. With a polished finish they look great and are easy to install.
B&B Off Roads Honda CRF50, CRF70, XR50 & XR70 bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.
All bash plates are supplied with the necessary stainless clamps and bolts where possible.
All bash plates have a polished finish and have foam or rubber where required.
B&B Off Roads Honda CRF80, CRF100, XR80 & XR100 bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.
All bash plates are supplied with the necessary stainless clamps and bolts where possible.
All bash plates have a polished finish and have foam or rubber where required.
B&B Off Roads Honda CRF125F bash plate is designed to give your mini bikes frame rails & engine casings some added protection. Your engine casings a very vulnerable part of your bike which can be easily damaged from roosted debris, sticks/logs while riding or from simply dropping your bike.
- Made from 4mm 5083 Structural Plate
- Fully tig welded
- Comes in polished or black PPA coating.
- All hardware for mounting is included.
- Foam insulated to help reduce frame contact/rubbing
B&B Off Roads Honda CRF230L bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider.
All bash plates are supplied with the necessary stainless clamps and bolts where possible.
All bash plates have a polished finish and have foam or rubber where required.