DRZ400

Heidenau tires are made in Germany and they are high quality motorcycle tires for street, off road and adventure riding.

Durability, It’s about the Rubber

Heidenau’s compound uses a high natural rubber content, and there’s a lot on there. This naturally resilient compound, combined with sturdy Belted construction, makes for one of the most trusted, longest lasting tires available to long distance travelers.

Scout Tread Design:

Most asked question, why do different sizes look different?(see link below) A new compound created new challenges in design. Heidenau took the opportunity at the inception of the Scout, to tailor the design to best suit the application. Incorporating feedback from customers and countless miles of testing, this resulted in tires looking different for the different bikes, but insuring the best performance.

K60 Tread design:

The K60’s interrupted block chevron pattern makes for a respectable off road tire that’s smooth on the street

Fitment

Found in most common Enduro sizes for most manufactures as either a K60 or a K60 Scout. Every Scout is a K60, Not every K60 is a scout. If your rim requires an inner tube, a quality inner tube can be safely used with any K60 Scout.

The K60 Scout Cold Compound (CC) is a softer compound than the standard K60 Scout, delivering better cold traction and a small loss of tread life. Only available in super moto sizes.

• Long mileage, serious traction and smooth transition from pavement to gravel to dirt, the GPS does it all.
• Reversible rear to suit the rider’s needs – either 50/50 or Mostly Off-Road.
• In 50/50 direction the GPS is a well behaved street-able tire with smooth cornering transition from center to cranked all the way over.
• In Mostly Off-Road direction the aggressive straight line hook-up and cornering drive is engaged for better off-road traction.
• Stronger carcass construction than other 50/50 adventure tires provides world class performance with a high resistance to punctures
• Deeper tread than most adventure tires.
• Unique Hybrid compound with Silica for long mileage and optimum grip in mud and snow.

NOTE: Tubes can be run in Tubeless (TL) tires.

The 244 Series Dual Sport street and trail tires were designed to be equally at home on dirt or pavement. Great value.

• DOT approved, tube type
• 4-ply rating
• All sizes designed for front or rear fitment

Pirelli's Corsa radial or bias-ply with maximum grip tread.

Superb corning and straight-line stability.

Exceptional wet-weather performance.

Tubless design.

• Tread pattern yields traction in hard terrain
• Built-in rugged tread blocks feature Staggered Step design, a step-down feature to provide rigidity in the contact patch to enhance stability and handling
• Wrap-around lugs on the tire's edge to protect the tire from sharp rocks and provides additional off-road traction
• New compounds to deliver the perfect balance between road and off-road performance with focus on delivering class leading mileage performance
• Deep grooves excel in wet weather conditions
• T-rated for speeds up to 118 mph
• Tires are tubeless, however if mounting on rims that require a tube (i.e., spokes) the appropriate tube may be fitted
• Blackwall
• Fits popular large and small displacement machines.

Dual purpose tires made for 60% street, 40% off-road.

Excellent performance on dirt, gravel and bad roads.

Tube type, S rated (max speed of 112 mph)

Shinko 700 Series tire features an aggressive 60% on-road and 40% off-road read pattern for good dirt riding performance, without sacrificing pavement grip. Other features:

• Aggressive tread pattern with drop lug construction
• Heavy-duty 4-ply carcass for durability
• Reinforced side knobs for cornering stability
• DOT approved

The TCK70 combine rugged off-road ability with balanced street performance. Unique tread block pattern makes this tire quiet and stable on the road yet still agile on gravel. Combined with a MultiGrip semi-dual compound technology allows different levels of tire 'hardness' on the central tread and tire shoulder for extended mileage and improved cornering grip.

Tires listed are all standard Bias Ply tires unless noted with an -R after the size.

• RainGrip technology provides outstanding wet-weather grip and short tire warm-up times
• High stability and low kickback from 0° steel belted construction
• T Rated (max speeds of 118 mph)

All of the TKC70's are Tubeless Tires. However, tubes can be used in Tubeless tires.

The GP-110 Dual Sport Tire from IRC is designed to provide their most superior dual sport performance. It has great handling and control both on and off the pavement. Special knobs penetrate loose surfaces for excellent traction, braking and cornering off the road with a stable grip along the tire's mid-line for highway travel. Features include:

• Innovative knob design offers excellent off-road bite
• Wont be shredded on the highway like full knobbies
• DOT approved,4-ply tire 80% on road 20% off road
• Tube Type tire and S rated (max speed of 112 mph)

Kenda's Dual-Sport tire designed for the 80% on-road, 20% off-road crowd.

• DOT approved
• Unique combination of street and off-road grip provides maximum performance
• Strong and durable Nylon four-ply construction
• The advanced compound design gives better stability, cornering traction and braking control
• Tube type tire H-rated (max speed of 130 mph)

From Shinko Tires, the 705 Series are DOT approved Dual Sport tires designed for 75% street and 25% trail riding. An versatile tread pattern provides excellent wet and dry weather adhesion and the compound resists tearing while riding off-road. "R" in size denotes a radial tire.

The GP-1 Dual Sport Tire from IRC is designed to provide the best possible handling and control for both on and off the pavement. Special knobs penetrate loose surfaces for excellent traction, braking and cornering off the road yet won't wear off as fast as a full knobby when used on the street. Features include:

• Innovative knob design offers excellent off-road bite
• Won't be shredded on the highway like full knobbies
• DOT approved, 4-ply tire 90% on road, 10% offroad
• All GP-1's are Tube type tires and P rated (max speed of 94 mph)

A Dual Compound radial for performance street riding.

Tread surface divided into three separate areas featuring two different rubber compounds.

Softer shoulder rubber provides phenomenal cornering grip.

Lean angle up to 51.2°

Tubeless and W rated (max speed of 168 mph)

ULTRA HIGH-PERFORMANCE HYPERSPORT TIRE

Avon's technological design and construction gives ultra high-performance handling and stability characteristics.

Multi-compound rear tire for all around performance.

Tubeless and V rated (for max speed of 149 mph)

Extremely light handling with exceptional grip in corners, combined with high mileage compound. This radial tire offers great control and feedback when riding on the limit. Quick warm-up and good grip when cold thanks to a specially developed tread compound.

0° Steel belt construction on the front and rear for higher stability and great feed-back when braking into and accelerating out of curves.

One of the best street SuperMoto tires.

Tubeless and H rated (max speed of 130 mph)

The well proven, premium Dual-Sport tires now sized to fit SuperMoto wheels. Easier and less expensive tha n lacing up dedicated off-road wheels for your SM. Aggressive tread knobs for bite in the dirt. Sticky rubber for traction on the pavement. This is a great tire that can make your street Motard into a Do-It-All ride.

Available Rear Tire 150/70-17 only

A Radial tire specifically designed for small displacement sport bikes. Advanced belt design and Jointless Band (JLB) rear tire construction utilizes a continuously wound belt for smooth performance and a consistent tire contact patch. Aggressive sport-derived treat pattern for enhanced on-bike appearance.

These tires are all tubeless and H-rated (max speed of 130 mph)

This is a great SuperMoto tire that has increased grip on wet roads, with a focus on low friction surfaces (such as city streets, worn tarmac, etc).

These have a compound solution that enhances chemical grip and adhesive properties in all different situations.
Metzeler's patented mixing process delivers a more homogeneous compound that emphasizes the chemical properties and results in more resistant to the wear process.

These are tubeless tires and V rated (max speed of 149 mph)

Designed to offer high levels of handling and safety, including wet, bumpy, and dirty roads.

Sporty handling, and good grip on wet surfaces.

Tubeless tire and W rated (max speed of 168 mph)

Slick/dimple design is great for serious sport riding.

Soft compound for quick warm-up and great performance.

W speed rated (168 mph), Aramid belted, DOT approved.

From Shinko Tire, the 705 Series are DOT approved Dual Sport tires designed for 75% street and 25% trail riding. This aggressive tread pattern provides excellent wet and dry weather adhesion.

Note: Tires in the dropdown menu with an -R behind them indicate Radial Tires.

Completely slick radial construction soft compound tire provides the largest possible contact patch to the road. Recommended for drag race and short course, track day use only.

Features:

• Completely slick, soft compound tread
• Radial construction
• Aramid belted
• Excellent Super Moto tire
• NHS (Not for Highway Service)

A somewhat neutral cross-sectional shape for improved handling and stability for light weight supermoto bikes.

Improved wet and dry performance.

Tubeless and H rated (max speed of 130 mph)

Ideal for smaller street bikes or smaller SuperMoto wheels.

Offers safety, durability with a ratio of grooves that has been increased to improve the balance between grip and wear.

Grooves run from the center to the shoulder to facilitate the evacuation of water and offer good grip on wet roads.

Possibly the best value for smaller SuperMoto tires.

Bias-ply and tubeless, S rated (max speed of 112)

Radial architecture that enables improved overall response and handling as well as unrivaled performance when compared with a same-size cross-ply tire. A 100% silica rubber compound delivers the best wet grip in its category. Derived directly from the radial Sport Touring ranges and a tread borrowed from the Pilot Road 2. Good for tubeless or tube type applications

 H-rated (max speed of 130 mph)

A versatile performer with a tough nylon carcass and raised dimpled knobs that work well in a variety of terrain.

Features:

• Narrow knobby configuration means less of an environmental foot print on the trail
• 4 ply rated
• DOT approved
• Not intended for extended highway use
• All sizes will work for front or rear fitment
• “GOLDEN BOY”

Designed specifically for dirt track racing. One of the most popular tires in flat track racing. Tread designed to provide superb traction and stability on any race track. Available in 2 different rear compounds.

Not DOT approved for street or highway use!

• 27.0 x 7.0 x 19 Front - CD3 (soft) compound
• 27.5 x 7.5 x 19 Rear - CD3 (soft) compound
• 27.5 x 7.5 x 19 Rear - CD5 (med) compound

Designed specifically for Dirt Drack racing for mini racers. Tread design can be customized to meet each rider's needs to provide superb traction and stability on any race track.

Not DOT approved for street or highway use!

TUbliss is, essentially, a high pressure rim lock and seal that secures the entire tire bead to the rim, completely eliminating the use of a conventional tube. TUbliss allows you to run a low tire pressure (as low as 10 psi) which dramatically improves traction; especially important for Enduro and Baja racing. For Offroad use only.
The TUbliss system MUST be installed on the correct size rims to work - 18" x 1.85 to 2.15; 19" x 1.85 to 2.15 and 21" x 1.6.

Please be sure that you have the correct size rims before ordering.

• Low-pressure capability
• Massive traction gains
• Pounds lighter than HD tubes
• No pinched flats
• Plusher ride
• 2 minute tire repairs
• Superior rim protection

Warp 9’s Pro Rim Locks are developed with Ice Track, Dirt Track and Flat Track Racers in mind!

Burnt Titanium Main Bolt

Lightweight Forged Aluminum Body

Black 7075 T6 Tower Nut and Base Washer

Base washer is machined to match each specific rim curvature for a perfect fit

About half the weight of OEM rim locks!

1.60 front  – 1.8 oz

1.85 front – 2.0 oz

2.15 rear – 2.3 oz

2.50 rear – 2.7 0z

3.00 rear – 3.10 oz

New tires and tubes deserve new rim strips! Choose the correct size for your wheels and toss-out those old cracked and broken ones.

For 19" rims, please order the 18" rim strip. These fit just fine!

Be sure to order the 2.25" wide strip ONLY if you have SuperMoto rear rim. This is a 16" strip that will fit your 17" SM rim perfectly!

You can purchase single strips or sets for your wheel sizes.

Our Heavy-Duty tubes are made specifically for off-road riding. These are the sturdiest, highest quality tubes on the market. They are 3mm thick with natural rubber construction to better resist pinch flats and are easier to patch than butyl rubber tubes. These have a straight metal valve stem. New tubes deserve new rim strips. Don't forget to add them in to your order.

• 17" tube works with 120,130 and 140 metric tires or 4.50 to 5.10 inch size tires
• 18" tube works with 100 to 130 metric or 4.00 to 5.10 inch size tires
• 19" tube works with 100 to110 metric or 4.00 to 4.60 inch size tires
• 21" tube works with 80 to 100 metric or 3.00 to 3.50 inch size tires

Standard Duty tubes are made with seamless construction from natural rubber with heavy duty valves. Great replacements for stock tubes and perfect as spares to carry on your bike.

• 17" tube works with 110/90, 120/80, 120/90 (4.00 to 4.25) tires
• 18" X 3.75 tube works with 110/90, 120/80, 120/90 (3.75 to 4.25) tires
• 18" X 5.10 tube works with 110/90, 120/90, 130/80, 130/90 (4.00 to 5.10) tires
• 19" tube works with 100/90, 110/90 (3.60 to 4.10) tires
• 21" tube works with 90/90, 90/100 (2.75 to 3.00) tires

Don't forget a Rim Strip. New tubes deserve new rim strips.

We offer two different types of SuperMoto tubes. The first are Standard Tubes and are meant to be used with standard bias-ply type tires, but can be used with radial tires also.

But, if you are running radial tires, like SuperMoto, or have a retro bikes with spoked wheels and radial tires, you probably want to run the 'Radial Tubes'. Front tubes fits 120/70 and 120/60 tires. Rear tubes fits 150/60, 150/70 and 160/60 tires. These have a metal valve stem.

These Rider's Wrenches by Fredette are combination wrenches that have three wrenches in one! A 2-stroke size spark plug wrench - a front axle and a rear axle wrench. Yep, all three in one unit.

Available in the combinations shown that will fit virtually all current dual-sport machines.

A kit that includes an Axle Wrench combo for your bike with a 19mm for the front, and a 24mm for the rear. Just 7 1/2" long, it is long on leverage, but short enough to fit in even the smallest tool kit.

Also includes a pair of 'trail size' small tire irons.

This is a DRC wrench for your axle nut on one side, and a great tire spoon on the other.The long handle makes it easy to undo tight axle nuts and give you a bunch of leverage for changing tires. These are heat treated steel and range from 10 to 10.6 inches long.

Here is a set of 'trail size' tire irons. At 8-1/2 inches long they are small enough to fit in a fender bag with your spare tube.

Motion Pro T-6 Combo Lever has a hex box wrench for your axle nut on one side and a perfectly contoured tire spoon on the other. Manaufactured from lightweight forged T-6 aluminum with a hard anodized finish. These beauties are just under 10 inches long and weigh only 3.5 oz. Available in a 12/13 combo unit and a 22, 24, 27 and 32mm hex ends.

Our portable 12v compressor is perfect for any tool kit. This unit weighs only 14 oz and measures just 4"x2"x6".

Features a built in LED light and 0-120 psi gauge

• Comes with everything shown

The MotoPressor is a compact pump unit that weighs only 1.3 pounds and fits in the palm of your hand! Measures 4"x3"x1.5"  This makes it smaller and easier to carry with you.

It includes a 8 inch long inflation hose, with a a low air loss chuck. You also get an SAE power cord that attaches to your battery and stays there, along with alligator clips with SAE connector. The Pocket Pump has an 6.5 foot power cord. All of this packs into a heavy duty neoprene pouch.

MotoPressor will inflate a 150/70/ R18 tire from 0-31psi in under 4 minutes, and is capable of pumping up to 130psi. It also features a built-in cooling fan to keep the pump at optimum operating temperature, and a check valve to check the psi by attaching your tire gauge to this valve.

The Mini-Morph is actually a bicycle pump, but it is the best manual compact pump for adventure / dual-sport riding. It has a fold-out foot and handle and a 4 inch hose so you can set it on the ground to pump!

This thing is small enough to stow away in just about any bag and go unnoticed until you need it to fix a flat or add air after a long arduous ride.

All that you need to repair and inflate your tire on the road or trail.

• Padded nylon zippered carrying case easily stores inside fanny pack or tool compartment
• Everything needed to repair and inflate tire on the road or trail
• 4" inflator hose accepts threaded cartridges only
• Each cartridge produces 8-9 psi
• Made in the USA

Kit includes:

• 1 - large oblong patch
• 2 - medium size patches
• 3 - small patches
• Thumb buffer
• 0.50 oz tube of rubber cement
• 5 - 4" rubber insert strips
• Insertion tool with screwdriver handle
• Reamer/rasp tool with screwdriver handle
• 3 - 16 gram 3/8" threaded CO² cartridges
• CO² 4" inflator hose

CO² cartridges cannot be transported on an aircraft.

Don't leave yourself stranded! The Moose Tire Inflator Kit gets you back on the road or trail quickly.

This kit has 3 cartridges, 4" inflator hose, and a zippered pouch that fits neatly into a tool bag or fender bag.

Uses threaded cartridges only, each cartridge produces 8-9 psi.

  CO² cartridges cannot be transported on an aircraft

A set of 6 threaded cartridges, good for 8-9 psi each.

• Replacement packs for all CO² tire inflators
• Threaded cartridges have 3/8" threading

  CO² cartridges cannot be transported on an aircraft

The Pro Fill Air Chuck from the people at Motion Pro is perfect for those tough to reach valve stems with its pivoting angled head. The design gives users extra hand clearance to avoid hot brake rotors or dirty chains. Billet manufactured from aluminum gives it a precise fit and function combined with light weight. It is finished off with a beautiful blue anodizing and then the Motion Pro logo is laser etched on forever. 1/4" NPT female inlet allows use with common air hose couplings and fittings.

A great addition to any tool box!

Changing tubes or tires without the right tools can be a real chore. Don't fight your snug beads any longer, use this 27" long tool that opens to 7-3/4" to provide the leverage you need to easily break your tire bead. Constructed from heavy-duty steel with comfortable no-slip grips, this tool makes the job a snap.

• A tool to keep open up the bead when replacing a tube.
• Works smoothly even with the toughest beads.

The Moose Tire Bead Tool holds your tire in place as you work you way around the tire

Made of aluminum with a nylon screw so it will not scratch the rim

Sold in pairs

• Durable 6061 aluminum with blue anodized finish and laser engraved logo
• Used to push the tire bead down into the drop center of the rim on off-road wheels while using tire tools to change tires
• Hooks over spoke and pushes bead down on opposite side of tire from tire irons
• No more fighting to keep bead down while installing off-road tires

No more fighting to keep the bead down while installing or repairing your off-road tires. The Bead Buddy holds the tire bead down in the drop center of the rim during tire changes making changes as easy as possible. Machined from tough 6000 series aluminum the Bead Buddy is light weight and compact enough for any tool pack. The Delrin securing thumb screw insures no scratches to your rims.

The Bead Buddy is NOT recommended for use with Bib Mousse tubes.

• Innovative multi-use tire tool set
• Breaks the bead on most street and off road motorcycle tires
• Integrated tire spoon for tire removal and installation
• Light weight and compact size is perfect for tool packs
• Ergonomic handles with crossguard to keep hand from riding forward
• Forged 7075-T6 aluminum construction for strength and durability
• Black anodized finish
• Patent pending

Available in 9.5" aluminum (ideal for travel) and 16" forged steel (useful in a home shop/garage)

Super sticky, pre-glued patches that adhere to tubes instantly.

This kit includes 6 patches and scuffer.

The MotoPressor Puncture Repair Tool combines the four tools essential for tubeless tire repair into a single tool.

With the motorcyclist in mind, they've designed a "4 in 1 multi-tool" that uses pre-vulcanized repair strings and packs into a sheath measuring a mere 130 x 68 x 50mm, that's small enough to fit in your pocket. The tool contains a pair of pliers, a rasp, an insertion tool and a sharp knife, which is all you'll need to fix 99% of punctures. The repair strings are pre-vulcanized, so they've done away with the "little tube of glue". The repair plugs the hole AND leaves a "patch style" repair on the INSIDE of your tire.

If you'd like to see the tool in action go just click HERE, and watch the demo.

Protect your wheels from scratches and dings caused by tire changing tools.

• Includes retrieval cord for easy use
• Sold in pairs

• Large display, readings are shown to 0.1 psi
• Kpa and Kg-cm2 scales also provided
• Reads up to 99 psi
• Ergonomic shape fits nicely in your hand

This "pencil style" tire gauge has a brass head and a plated brass body.

90° angle allows for easy access to valve stems and easy reading.

5 to 50 psi measurement in one pound increments.

Very accurate.

This great tire gauge measures from 0-100 psi.

Has a back-lit display, and a front light to help locate the tire valve.

Select from psi to kPa units of measurements.

Replaceable batteries and automatic shutoff

CE approved and CARB compliant.

Very accurate.

Refresh your front or rear tire instead of throwing them out! Tread Doctor Lightweight heated tool lets you quickly cut new edges into your dull worn out knobby tires.

Features:

• Aluminum air valve cap
• Comes in pairs
• Add some " bling " to your bike
• Helps Keep the air in your tire

The aluminum part can be used as a valve core remover / wrench.
- Made of A6061 aluminum.
- Available in 6 beautiful anodized colors.
- Comes in pairs.

Warp 9 stem puller

 Here is a list of the features of their CNC machined tool.

• Stainless Steel tip, wont break like softer brass tip
• Ribbed head for easier core removal
• Core tip threads into handle to protect tip from damage
• Includes spare valve core in handle for easy trail side repairs
• Tapered handle ends to make tip removal easier with gloved hands and non square edge doesn’t damage tool bags

Flats never occur next to a green grassy field with daisy’s … it always happens way out in the bush and in the dirt and weeds. Change your flat on a clean surface protecting your hubs and bearings from picking up unnecessary dirt and debris with the OBR ADV Gear Flat Mat. Our 24” x 24” Flat Mat provides you a clean area to set your wheel onto while also having convenient slip pockets to stash those easy to loose bits and parts that you removed during the flat repair.

Features

• Heavy duty industrial material construction
• Slip pockets to keep those loose parts and tools close by
• Reinforced center panel to set your hub onto
• Folds flat for easy storage within your luggage

In the shop or on a trip, these are the Tire Irons to have.

Sold Each

• Constructed of strong, heat-treated vanadium steel
• Spoon design decreases the chance of tube pinch
• 10" long tire iron with coated rubber handle

Windscreen attaches to your bike's handlebars. Fully adjustable mounting brackets. Includes 7/8' handlebar clamps. 14" tall & 10" wide.

Will not fit 1 1/8" oversize handlebars.

Transform your ride
Now there is wind protection for on and off-road use with no compromises! MadStad's new rotating dual-sport windshield brackets put the windshield where you need it for street riding, but tuck it down out of the way for off-road. Adjust the height and angle for much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide, and it's not in your face when you want to hit the trails.

Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield. Your bike will not require any modification.

What's included in the kit

• A set of MadStad dual-sport adjustable brackets
• The acrylic windshield

The MadStad brackets bolt to your fork clamps putting the windshield just in front of your instrument cluster for street riding, with adjustability for height and angle. The rotation feature allows you to shift the shield forward and down through 7 different settings bringing it down in front of the head light and out of your way. Their custom knobs lock the brackets in their multiple positions so the shield stays where you want it to, even bouncing around off-road.

Puig Visor Clip-On

• Suitable for screens with thickness between 3-5mm
• Multi-adjustable visor adaptable to Puig and OEM windscreens
• Visor is mounted by clip-ons and does not need to be drilled to the windscreen
• Visor sizes available include 90x230mm, 100x277mm and 102x325mm

High-quality, direct replacement plastic kit includes:

• Front and rear fender
• Side covers
• Air box cover
• Radiator shrouds

Yellow kit is only available with white side covers

  Add-on Headlight cowling fits S and SM models not "E" offroad model

Universal design. Vents in the back improve airflow to motor. Smaller front reduces 'wind steer' and improves high speed stability.

Genuine Suzuki super moto fender. A perfect match for the original gray plastic.

Universal off-road front fender. Must be drilled to fit your mounting bolt pattern.

Front fender from ProCycle Plastics (formerly DSA) is shaped very much like the OEM DRZ400SM front fender. Big enough to be functional without wind-steering the bike like the stock fender does. Vacuum molded, these are a design improvement over stock. These are fully compatible in any combination with the original factory plastic.

Quality parts from Acerbis. Replace those big white ones with black ones for a custom look, or you can just replace your trashed white ones with crisp clean new ones for that great stock look.

Depending on your application and preferences, more than one optional heat shield may be useful.

This frame includes six, white, full-spectrum LED bulbs on a 6-inch strip for bright illumination of your license plate. It is made in a sturdy cast aluminum, and is powder coated with a durable black finish.

Outside frame dimensions are 7.25" in. wide by 4.2". Center to center mounting hole distance is 5.7 in. All mounting hardware is included.

B&B Off Road Engineering Fender Brace is made to help support your front fender/guard. Also helps support and reduce fatigue from constant vibration.

Made from 4mm 5083 structural aluminum plate. If you wanted to carry a small tool bag this would be a perfect product to support the weight and strap the bag to.

Fits on top of the fender and bolts between the fender and bottom triple clamp. Requires you to drill one hole in the fender for mounting.

A stainless steel front fender brace. Helps stabilize your front fender.

Gives additional strength for carrying a fender mounted tool bag.

Fits on top of the fender and bolts between the fender and bottom triple clamp. Stainless steel won't rust or corrode. Includes hardware.

Requires you to drill one hole in the fender for mounting.

Adhesive heat shield for your new side panel plastics to protect it from the heat of your muffler.

Depending on your application and preferences, more than one heat shield may be useful.

Dimensions: 2"x3'

Moose Racing Adventure seat provides improved comfort for your riding adventures, or just commuting around. You choose between the stock seat height, or a low seat height (about 1 inch lower). The durable micro-fiber suede top cover enhances rider comfort and increases stability. Side gripper panels ensure secure seating during aggressive maneuvers. The cover is constructed from smooth marine-grade vinyl and features an embossed Moose Racing logo. It includes a strap kit that enables secure attachment of cargo to the pillion section of the seat.

Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat. Comfort Cell Foam retains resilience and doesn't crush down like the stock seat foam. On the top, Corbin covers are only the highest grade of weather resistant materials for durability and long life. Corbin seats install the same as similar to stock with two bolts into the chassis which provides a closer fit to the bodywork and tank.

Seat Concepts new wider seat to helps keep you comfortable on those long commutes or Dual-Sport rides. The added width and foam density will help keep the seat from being the item to stop you from going on that ride or enjoying the bike.

The new updated 2.0 version has a sleeker shape and a better fit in the tank area.

Complete Seats come assembled on an high quality aftermarket pan and ready to ride.

New wider seat to help keep comfortable on that long commute or dual sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike.

The new updated 2.0 version has a sleeker shape and a better fit in the tank area.

Complete Seats come assembled on an aftermarket pan and ready to ride.

This Comfort XL seat design is roughly 3" wider overall than their standard comfort seat. This means more surface area, better weight distribution, and added comfort for those not worried about seat width.

Available as Complete Seat only. The Complete Seats come assembled with an aftermarket pan and ready to ride.

State-of-the-art replacement seats, Sargent seats are built on a percision-molded lightweight Polytec seat pan. Sargent's proprietary seat foam (Super Cell Atomic Foam) is their own unique blend of resilience, firmness, and vibration-absorption qualities, making it well suited for long distance comfort and support. Sargent seats are covered in a marine-grade, UV-stablized mildew resistant CarbonFX vinyl. These seats will fit bikes with the stock, IMS, or any other aftermarket fuel tank.

This is a high-quality seat cover done by Moose for the DRZ400. This is a replacement cover only, no seat foam and you must install on your existing pan with existing foam. Heavy-duty marine grade vinyl with UV protection for long life. Double stitched for durability too!

This is the secret for being able to put in those 500 mile days. Even a good touring seat can feel a bit harsh after a couple hundred miles. These very comfortable sheepskin seat covers give you that extra bit of 'cush' and provides superior air circulation. Velcro straps allow easy install and removal when you don't need it. Measures 14" wide by 19" long, the perfect size for Dual-Sport seats.

Air filled AirHawk 12"x18" cushion custom fits your shape and redistributes pressure that causes numbness and discomfort when you ride. Seat cushion cover is constructed of a breathable, stretchable Nylon/Lycra blend with a non skid Urethane base. Open mesh side panels allow heat to escape. Easily inflates by mouth with no pump needed. Mounting straps and Repair patch kit included.

9" by 9" carbon fiber seat warmer that goes between your seat cover and the foam to keep your backside happy on those really cold days. This improved design produces 25% more heat than most other warmers using just 30 watts.

Kit includes the warming unit, with connector, 24" extension cable, rocker-type on/off switch and stub to splice into your wiring along with complete detailed instructions.

Replace the wimpy stock DRZ400 Skid Plate made from 4mm thick 5083 aluminium plate. Strong and great looking. Leave the stock wings in place and give yourself something that will really stop any damage between the frame rails. Supplied with all the necessary stainless steel clamps and bolts required. Available in polished or with the heavy-duty black polymer coating. Like all he other B&B Bash Plates, these plates have foam or rubber where required to keep things a bit more quiet. This plate fits the E, S, SM & kick start models.

The B & B Eng. DRZ400 Bash Plate is made from 4mm thick 5083 aluminium plate. Strong and great looking, this is the top of the line protection plate for the DRZ. Supplied with all the necessary stainless steel clamps and bolts required. Available in polished or with the heavy-duty black polymer coating. Like all he other B&B Bash Plates, these plates have foam or rubber where required to keep things a bit more quiet. This plate fits the E, S, SM & kick start models.

Thick carbon fiber plate with many advantages over aluminum.

The use of anti-ballistic composite material provides a longer fatigue life and greater tensile strength than aluminum.

Composite plates are molded to the exact shape desired, making for a closer fit and a more protective plate.

Composite plates absorb vibration and do not amplify sounds like aluminum plates do.

When hit hard, aluminum permanently deforms, bending frame tubes and slicing into water pumps.

Composite plates will bounce back from hard hits and look great long after aluminum plates give up.

Skid plates protect the side engine cases and the water pump in addition to the frame and the center case.

Designed with a high front to keep mud from building up on the engine.

Mounting hardware included.

• Made from strong and lightweight aircraft aluminum
• Protects vital engine parts from rocks and debris
• Custom fit to your specific bike model
• Oil drain hole for easy access
• All mounting hardware included

Protect your frame/paint from scuffs and scratches with frame guards. The DRZ 400 frame guards are made from 2mm 5052 marine grade alloy and CNC machined in one piece for strength. All frame guards are supplied with all necessary mountings and stainless bolts. With a polished finish they look great and are easy to install.

Give your DRZ that factory prepped look and protect your frame.

These frame guards from industry leaders Works Connection are CNC cut and formed from aircraft grade 5052 aluminum. These not only protect your frame from scuff and rub marks from your boots, but also give you a flatter surface for better grip and control with your lower legs. All the necessary mounting hardware is included making these a very simple bolt-on installation.

High quality aluminum caliper guards from Works Connection protects your brake caliper and looks great too.

Protect your brake rotor and fork lowers from mud and debris. Choose between black or white.

Protect your brake discs with high-grade aluminum alloy disk guards by Devol.

• Covers entire front leading edge
• Light weight and very effective
• Easy to install; all hardware included

One of the most advanced radiator protection systems available for the DRZ400. These guards feature maximum side and front impact protection by using a combination of CNC machined 6000 series aluminum and 5000 series alloy plate to create a complete system to protect your radiators from virtually every direction. Roost and debris protection is exceptional thanks to the angle fin design that leaves minimal exposure to the radiator core and veins.

Even with all of this protection, cooling airflow is still at its maximum with a front louvered panel built with fins designed to mimic the airflow characteristics of the OEM plastic fins. This panel can be removed easily facilitating cleaning of the radiator.

Three-piece modular construction eliminates the design limitations of one-piece designs. Integrated modular construction- Three piece modular construction allows for greater design flexibility eliminating the compromises inherent with one piece designs. Easy fitment no mods required- Radiator guards can be fitted in approx ½ hour using basic tools. Sold in pairs, but repair parts are available individually.

Can be fitted with 17L safari tank & Acerbis tank 

Will not fit the "S" & "SM" model if thermo fan is fitted

Radiator guards from Devol Racing protect your radiators from damage due to trail side objects and roost bullets. They offer protection not just from frontal assaults but also from those tricky side attacks. Made from high-grade aluminum alloy for light weight and strength, these guards have an improved air-flow design that eliminates any overheating problem. A solid mounting to the frame make these stronger than most guards that just mount to the radiators themselves.

Devol Racing makes a super product that will keep you on the trail for a long time.

CNC machined from 2.5mm marine grade aluminum- replace the stock plastic guard

Made of military aircraft grade 3/16" cast acrylic, this guard will protect your lens from roost, rocks and branches. Optical clarity of the acrylic ensures brightness and projection of your headlight are minimally effected while all the while protecting your headlight from impact and abrasion.

Guards are held to the headlight lens with an industrial strength hook and loop system on each corner.