CB500X

The CB500X is a new "light" adventure bike from Honda in 2019. It has been around since 2013 but, until recently did it receive the appropriate upgrades to make it more adventure worthy. 

Powering the CB500X is a 471cc fuel injected parallel twin with DOHC, all mated to a wet 6 speed transmission.

                                            Chain Size                Front Sprocket                  Rear Sprocket                Front Tire             Rear Tire                 Spark Plug
2019 - Present 520x112 15T 41T 110/80-19 160/60-17 CPR8EA-9
2013 - 2018 520x112 15T 41T 120/70-17 160/60-17 CPR8EA-9

 

Engine

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Radiator Hose Clamp Kit, Puig

CB500X '13 - '18
$30.95

High-performance clamp kits feature marine-grade 18/8 stainless steel clamps with rounded edges, smooth inners and polished surfaces; contain all clamps necessary to complete installation of radiator hose kit.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Radiator Hose Kit, Samco Sport

CB500X '13 - '18
Choose Color
$199.95
  • High-performance silicone radiator hose kits
  • Each kit features improved flow for better cooling – up to 9°F cooler
  • Color-matched to manufacturer's production colors
  • Each kit is handcrafted in the UK using the best silicone and fabric reinforcement materials and are 100% visually inspected before leaving the factory
  • High-performance clamp kits (sold separately) feature marine-grade 18/8 stainless steel clamps with rounded edges, smooth inners and polished surfaces; contain all clamps necessary to complete installation of radiator hose kit
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Clutch Springs, EBC

CB500X '13 - '18
$10.95
  • 15% stiffer than original
  • Minimize clutch slip
  • Reduce plate wear
  • Improve power to ground
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Oil Filler Cap, Billet PSR

CB500X '13 - '21
$24.95

CNC machined oil filler cap with locking clip to keep it in place in the roughest conditions. The cap is pre-drilled and the locking clip is safety wired to the mounting tap with a section of silicon tubing, that will not melt or discolor, over the wire. First class all the way. Available in Silver, Black, Blue or Red.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Oil Filter, Value 5-Pack Hi-Flo

CB500X '13 - '21
$35.95
  • The original Hiflofiltro factory was founded in 1955 and has been manufacturing filters for the OEM motor industry since 1963.
  • Constructed using the best materials available.
  • With the experience of more than five decades, constant research and development and featuring a completely modern production facility, Hiflofiltro offers some of the best quality filters in the world.
  • TUV approved and production monitored to ensure OEM or better quality.
  • Sold as a package of 5 oil filters.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Magnetic Drain Plug, PSR

CB500X '13 - '21
Choose Color
$19.95
  • Bolts are CNC-machined from high-quality aluminum
  • Embedded magnet helps keep bolt in place
  • Pre-drilled holes make for easy installation of safety wires
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Spark Plug, Standard NGK

CB500X '13 - '21
Add Lubricant
$6.95

Keep your motor running right with a fresh plug.

NGK Spark Plugs is the largest OE supplier and manufacturer of spark plugs in North America.

  • Superior construction for serious power
  • NGK makes plugs for almost every application and riding style
  • Versatile plugs with wide operating heat ranges prevent fouling from running too cool and preignition from running too hot
  • Feature high alumina ceramics for improved heat dissipation and electrical insulation, deep-seated copper core for a wider heat range and a nickel alloy tip for longer life

Price reflects the quantity of spark plugs required for your make and model.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Service and Repair Manual, Haynes

CB500X '13 - '21
$45.95
  • Whether it's simple maintenance or complete restoration, don't start work without Clymer, the leader in service manuals
  • Save yourself time and frustration with these procedures and techniques used by the professionals
  • Comprehensive manuals contain exploded views, drawings, specifications and charts that illustrate each job
  • Feature shortcut repairs and high-performance modifications
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Camshaft Installation Tool Kit

$199.95

Includes degree wheel, dial-gauge, multi-position stand, extension, 3-sizes of positive-piston stops, and a handsome wooden carrying case.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Clutch Holding Tool

$28.95

Made from medium carbon steel with hardened jaws. It features spanner pins and the jaws open up to 5" wide. It's ideal for holding clutch hubs, flywheels, gears, sprockets, etc. Made by Motion Pro.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Crank Case Separator Tool Set

$79.95

This tool is designed to separate vertically split crank case halves on two and four stroke engines. Adjustable arms allow it to be used on multiple bolt patterns found on a variety of makes and models of motorcycles. Industrial grade steel construction with black oxide finish for long service life. Comes with 8mm mounting bolts and 6mm adapters. Protective carrying case included.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Oil Filter Removal Tool, Motion Pro

$9.95

For easy removal of recessed oil filters.

Conical point screws pierces and grabs the metal end cap of the filter.

reduces potential damage to the engine cases.

NOT for use on re-usable oil filters.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Temperature Stickers

$14.95

A 3-pack of easy to apply strips measure the temperature of engine, suspension, and radiator components. Temperature range 146° to 248°

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Thread Chasers

$4.95

Thread Chasers are designed to clean and re-cut damaged aluminum threads.

this kit contains the two sizes most common on metric motorcycles, M6x1.0 and M8x1.25.

Thread Chasers also remove dirt and metal shavings that become captured in thread grooves.

Uses 8mm or 10mm hex sockets, a Must for all tool kits.

Fuel and Intake

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

EFI Programmer, Dynojet Power Commander V

CB500X '13 - '18
$469.95
  • Reduced size from PCIII USB (less than half the size of PCIII)
  • USB powered from computer (9V adapter is no longer needed for programming)
  • Two-position map-switching function built in (map switch not included)
  • Gear/speed input (allows for map adjustment based on gear and speed)
  • Analog input (allows user to install any 0-5V sensor and build an adjustment table based on its input such as boost or temperature)
  • With gear-position input connected, the PCV is capable of allowing each cylinder to be mapped individually and for each gear
  • Unit has a -100/+250% fuel change range (up from -100/+100%), which allows more adjustment
  • 10 throttle position columns (up from nine on PCIII USB)
  • Enhanced "accel pump" utility (increased adjustment and ranges)
  • Made in the U.S.A.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Pump Rebuild Kit, All Balls Racing

CB500X '13 - '15
$69.95
  • Includes all necessary parts to rebuild the OEM fuel pump module
  • Restore lost performance or non-functioning fuel pump with this economical solution
  • Kit comes ready for plug-and-play installation
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Air Filter, K&N

CB500X '13 - '18
$60.95
  • Designed to provide increased performance
  • Washable and reusable, pre-oiled and ready to ride
  • Multi-layers of woven cotton gauze media offers excellent filtration
  • Pleated media provides a large filtration area offering long service intervals
  • Fits directly into OEM airbox with application specific Sealing Bead to ensure a precise fit
  • Fuel-management modifications are not required for increased performance
  • Made in the U.S.A. for over 50 years
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Air-Box Filtered Vents

$13.95

Sold in 6 packs

  • Compatible with many air filter boxes.
  • More air flow allows you to add more fuel to your intake mixture, increasing performance.
  • 1" Diameter
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Carburetor Overflow Canister

$39.95

This canister by Pro Circuit allows you to move the overflow tubes from the carburetor up and out of the way. Universal application.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Clamps, Nylon Ratchet Style

$8.95

Quick release one-piece clamps that saves space. These are great for fuel lines, controlling wires, and can be used many times.

Comes with 4 each of 8mm, 9mm 10mm, and 12mm.

No special tools needed, from Helix Racing.

Gas Tanks

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Auxiliary Natural Tank LED Light Kit

$29.95

Become more visible and look cool while doing it. The ProCycle Natural Tank LED Light Kit will add more light to your bike with the push of a button.

Kit includes a handle bar mounted lighted switch, two 12" LED light strips with adhesive backing, four saddle splice connectors, and a center harness for connecting to your bikes harness.

Installation is quick and easy.

*Please note All colors other than amber and white are recommended for off road use only*

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Gas Cap Tank Vent

$11.95

If you're like us, you hate the long floppy vent hose hanging off the cap of your aftermarket tank. This one-way vent cap replaces the long hose with a short one only about 2" long. It allows air into your tank but prevents fuel from sloshing out. Machined from billet alloy and anodized for good looks.

Thumbnail

  Not for stock fuel tanks!

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Filter, 1/4" - 90° or Straight

Choose Type
$24.95

The small size and right angle hose barbs make this filter easier to fit into the small space between your fuel petcock and carburetor. Filter body is only 7/8" diameter. Straight filter is 2" long, 90 degree filter is only 1-5/8" long.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Filter, 5/16"

Choose Pack
$17.95

This filter is meant for 5/16" fuel lines. Only 1/2" thick it is small enough to fit just about anywhere.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Filter, Gas Tank

Choose Tank Type
$34.95

Fuel supplies can be sketchy at times. This filter lives in your tank to trap dirt and debris as it is poured into the tank. Features a custom shaped adapter that fits securely under the gas cap, creating a leak-proof seal. If it stays out of your fuel, it can't get into the carburetor! Created by the filter experts at Twin Air, this filter fits IMS,  Acerbis and Safari brand gas tanks.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Line Clamp Kit

$5.95

Ordering new fuel line? How about a set of fresh zinc plated clamps to go with it?

These will be sure your fuel line stays connected. A pack of 8 clamps in 2 sizes to fit most 1/4 or 5/16 fuel hose.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Fuel Line Reducer, 5/16" to 1/4"

$7.95

Hose reducer to go from 5/16" line down to 1/4" line. Many bikes have 5/16" carburetor spigots but most aftermarket petcocks are 1/4". This solve the problem of mismatched sizes. Solid brass construction. Can be used to route or repair fuel lines, oil lines or air lines. Barbed ends provide a secure fit.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Line, Premium

Choose Type
$8.95

30" lengths. Sizes shown are ID. All of these lines are stronger and more durable than vinyl fuel lines and are resistant to swelling, UV light, as well as hardening and cracking.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Auxiliary Container Mount Extension, RotoPax

$34.95

Need to mount two containers? A water and a fuel? Two waters? Already have a RotoPax Mount for a single container? Get this extender to work in conjunction with a pack mount and that will be no problem! Single mount, two containers.

 

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Auxiliary Container Mount, RotoPax

Add Extension Mount
$35.95

RotoPax holder made to mount a single Fuel and/or Water container.

Need to mount two containers? A water and a fuel? Two waters? Get the extender which allows you to stack two containers no problem! Single mount, two containers

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Auxiliary Container, RotoPax 1 Gallon

Choose Container
Add Container Mount
Add Extension Mount
$64.95

RotoPax are Rotational Molded - the process which produces indisputably superior products.

  • Thicker walls and stronger construction
  • Bright colors that are less prone to fading
  • Extra threads, thicker walls, and sure-seal gasket guarantee no leaks

Need to mount two containers? A water and a fuel? Two waters? Finally, you can stack multiple packs together! Use in conjunction with a pack mount. You will need to purchase the Single Mount as well as the Extender.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Auxiliary Fuel Pack, Open Trail 1.5 Gal

Add Container Mount
Add Fuel Stabilizer
$59.95

Quality Fuel pack that's slightly larger than RotoPax 1 gal.

  • New seven layer blow molded technology
  • EPA and CARB approved
  • Sleek, low profile design
  • Versatile mounting capability

Note: Mount listed is a RotoPax mount that will fit the Open Trail Fuel Packs.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Auxiliary Gas Bag, Fuel Safe Bladder, Giant Loop

$234.95

Giant Loop's Gas Bag Fuel Safe Bladder conveniently transports 1 gallon of hydrocarbon fuel for power sports use in a collapsible welded film and ballistic nylon reinforced container that rolls up or packs flat when empty, weighing less than 1 pound.

The Gas Bag Fuel Safe Bladder Kit includes 2 pairs of Giant Loop's adventure proof 26" Pronghorn Straps plus a 3-Pack of Fast Funnel Disposable Fuel Funnels.

Each Gas Bag Fuel Safe Bladder is individually pressure tested and made in USA by Fuel Safe, a leading fuel containment manufacturer based in Oregon.

  • Volume: 1 gallon maximum capacity (3.8 liters).
  • Empty weight: 11.5 oz.
  • Dimensions (flat and unfilled): 19.5" long x 9.5" wide. Rolled diameter (empty): approximately 4".
  • Filler neck is standard size, fitting "universal" spouts.
  • Materials & Construction: Welded film bladder sewn into ballistic nylon sleeve with webbing daisy chain anchor points and handles.

 

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Auxiliary Gas Tank, Acerbis

Add Fuel Stabilizer
$112.95

Auxiliary fuel tanks mount to handlebars, forks, or rear racks.

  • Suitable for minis, trials bikes, full size bikes, and anywhere else a little extra fuel is needed.
  • Each tank includes a siphon kit that connects the tank to the main fuel tank and automatically siphons fuel while the bike is being ridden.
  • With this design, the auxiliary tank empties first, before the main tank.
  • Does not interfere with headlight, handguards, rear seat, etc.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Super Siphon

$19.95

This Super Siphon has  a (1/2 inch x 6 foot) long hose, which makes it quite easy to transfer fuel from one bike to another! Simply, shake the hose to prime it and get fuel moving.  The hose is resistant to gasoline and any other hazardous chemicals. Roll it up, stuff it in your bag and you will be very happy whenever you need it.

Body

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Windscreen Lip, Laminar

CB500X '16 - '21
Choose Height
$89.00

This product is a windscreen lip that will offer more protection from the wind and weather. These mount directly onto your existing windscreen.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Windscreen, Dual Sport

Choose Color
$129.95

Windscreen attaches to your bike's handlebars. Fully adjustable mounting brackets. Includes 7/8' handlebar clamps.  14" tall & 10" wide.

Thumbnail

  Will not fit 1 1/8" oversize handlebars.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Windscreen, Race - Puig

CB500X '13 - '15
Choose Year / Tint
$109.95
  • Aerodynamic tests are supplied with most windscreens
  • Double height to diminish air pressure to helmet
  • Improved aerodynamics and wind protection +12.7% compared to OEM
  • Racing screens utilize a double height that keeps wind buffeting to a minimum
  • Rounded edge profile
  • All screens are 3mm thick and are made of 3mm high-impact acrylic
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Windscreen, Visor Clip-On Puig

$119.95

Puig Visor Clip-On

  • Suitable for screens with thickness between 3-5mm
  • Multi-adjustable visor adaptable to Puig and OEM windscreens
  • Visor is mounted by clip-ons and does not need to be drilled to the windscreen
  • Visor sizes available include 90x230mm, 100x277mm and 102x325mm
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Front Fender, Supermoto

$28.95

Universal design.  Vents in the back improve airflow to motor.  Smaller front reduces 'wind steer' and improves high speed stability.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in United Kingdom

Mini Fairing Screen, Adventure-Spec

$36.00

Replacement screen for Adventure-Spec Mini Fairing.

This is for screen only, please see Mini Fairing Support for complete assembly.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in United Kingdom

Mini Fairing Support, Adventure-Spec

Choose Bar Size
$99.95

A universal mini-fairing (for 22mm (7/8") and 28mm (1 1/8") Bars) designed to help you mount anything you choose on an industry standard 30mm x 38mm AMPS 4 hole pattern (perfect for a RAM ball or powered Garmin Montana Rugged Mount). In addition the fairing comes with two holes for mounting a standard cigarette lighter / USB style socket and a 12v rocker switch.

This is for the support mount only, COLOR SCREEN SOLD SEPARATE.  Please choose color screen in drop down menu to complete the assembly.

Not for CRF450L (see model specific listing)

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA ProCycle Approved

License Plate Frame, LED

$29.95

This frame includes six, white, full-spectrum LED bulbs on a 6-inch strip for bright illumination of your license plate. It is made in a sturdy cast aluminum, and is powder coated with a durable black finish.

Outside frame dimensions are 7.25" in. wide by 4.2". Center to center mounting hole distance is 5.7 in. All mounting hardware is included.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Heat Shield, Side Panel

$14.95

Adhesive heat shield for your new side panel plastics to protect it from the heat of your muffler.

Seats

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Dual-Sport Canyon Comfort, Corbin Seat

CB500X '13 - '21
Top Texture
Side Texture
$532.95

Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.

Because Corbin seats are custom made they are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.

The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides.  You can view all of the available materials and colors on Corbin's Website.

Thumbnail

Corbin seats are custom made to order. Please allow 3 weeks delivery time.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foam and Cover Kit, Seat Concepts Comfort

CB500X '13 - '19
$199.99

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.  

Rally Tall seat is built up 1.75 inches and they leveled out the angle of the rider platform to reduce the slope-into-tank feeling of the stock seat.

On the Standard seat they built up the front, but dished out the rear slightly to level out the angle of the rider platform, and reduce the slope-into-tank feeling of the stock seat.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Seat Cover, Sheepskin

$69.95

This is the secret for being able to put in those 500 mile days. Even a good touring seat can feel a bit firm after a couple hundred miles. Sheepskin gives that little bit of 'cush' and provides superior air circulation. Velcro straps allow easy removal when you don't need it. Measures 14" wide by 19" long.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Seat Cushion, AirHawk

$112.95
  • Air filled AirHawk 12"x18" cushion custom fits your shape and redistributes pressure that causes numbness and discomfort when you ride
  • Seat cushion cover is constructed of a breathable, stretchable Nylon/Lycra blend with a non skid Urethane base
  • Open mesh side panels allow heat to escape
  • Easily inflates by mouth with no pump needed
  • Mounting straps and Repair patch kit included
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Seat Warmer Kit

$79.95

9" by 9" carbon fiber seat warmer that goes between your seat cover and the foam to keep your backside happy on those really cold days. This improved design produces 25% more heat than most other warmers using just 30 watts.

Kit includes the warming unit, with connector, 24" extension cable, rocker-type on/off switch and stub to splice into your wiring along with complete detailed instructions.

Armor - Bike Protection

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Skid Plate, SW-Motech

CB500X '13 - '18
$239.95

Features:

  • Provides protection for vulnerable engine components
  • Safeguards the exhaust headers, oil filter & oil pan
  • For protection from collisions, stones & debris
  • Sturdy aluminum construction (4mm sides, 2.5mm base)
  • Powder coated black sides with laser cut ventilation holes
  • Designed & engineered in Germany
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Engine Guard, Puig

CB500X '13 - '18
$203.40

*2019+ Engine Guards Coming Soon*

  • Essential protection for many late model adventure touring bikes
  • Precision built for exact fit installation
  • High Strength 25mm diameter powder coated aluminum construction
  • All necessary hardware included
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguard Kit, Barkbusters BBZ Fabric

$99.95

Extend your comfortable riding season with Barkbusters BBZ cold weather protection handguards. Designed to fit with or without existing Barkbusters backbones or handlebar weights, these guards offer superb wind protection without limiting access to your grips or controls. Simple to install, they can be mounted or removed within ten minutes without permanent modifications. Ride with less bulky gloves in colder weather with the Barkbusters BBZ cold weather protection handguards.

Features:

  • Fits most motorcycle handlebars
  • Maximum cold weather protection
  • Compatable with or without Barkbusters backbones
  • Lined with waterproof membrane
  • Windproof
  • Full wrap design
  • Allows full access of controls
  • Does not block view of handlebar thumb controls
  • Simple to install and remove

Whats in the box:

  • Two BBZ cold weather handguards
  • Mounting hardware
  • Instructions
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards Kit, Moose

Choose Handguard
$67.95

Contoured alloy hand guards with inner mounts, allow space for the clutch cable and brake hose.

Images show a set of these hand guards installed on a set of CR High Gunmetal Fly Handlebars with large black deflectors. The far right image shows the need to flip the brackets that attach to the bar on the clutch and front brake side. On the front brake side the clamp must go over the front brake line while on the clutch side it goes under the cable.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Acerbis X-Factor

$139.95

These handguards come with mounts that will work on both standard and and oversize bars. The aluminum wrap-around bar is the biggest on the market with two large plastic shields that are also some of the largest available. The X-Factor hand guards offer great protection from the elements, especially during those colder months when you're trying to stretch out your riding season.

Works with 7/8" or 1-1/8" bars.

Thumbnail

  X-Factor guards require you to cut your lever ends down, or use short levers.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Acerbis X-Factor Replacement Plastics

$22.95

Replacement handguards for your Acerbis set up. Tough Polypropylene shields with a larger 6" outer diameter, built for extreme riding conditions.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Barkbusters STORM Kit for 7/8" or 1 1/8" Tapered Bars

Choose Kit
Add Barkbuster Indicator Lights
Add Resistor Set
$119.95

Protect your hands and levers with the Barkbusters Storm lever and weather protection handguards. Full wrap solid heat treated aluminum bars with secure two point mounts on each side provide strength while attractive and generous guards provide shelter from the wind and weather. Ride longer with the Storm handguards and complete mounting kit by Barkbusters.

Features:

  • Two mounting points provide secure protection
  • Full wrap guards
  • Heat treated aluminum backbone bars
  • Easy installation
  • Tough and weather shielding Storm handguards
  • Aluminum backbones are compatible with all Barkbusters deflector guards

What's in the box:

  • Left and right aluminum backbone bars
  • Inner and outer handlebar mounting hardware for both sides
  • Left and right Storm plastic handguard deflectors
  • Installation instructions
Thumbnail

  Not recommended for Africa Twin, T7, Himalayan, or V-Strom.  Please see specific listings for those models.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Barkbusters VPS Kit for 7/8" or 1 1/8" Tapered Bars

Add Barkbuster Indicator Lights
Add Resistor Set
$116.95

Keep your hands and controls protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Heat treated aluminum backbones with two mounting points of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors, available in multiple colors, provide protection for your hands from the wind and brush. Ride longer, more comfortably with Barkbusters VPS lever and wind protection handguards

Features:

  • Two mounting points provide secure protection
  • Full wrap guards
  • Heat treated aluminum backbone bars
  • Includes VPS left and right plastic deflectors
  • Easy installation

What's in the box:

  • Left and right aluminum backbone bars
  • Inner and outer handlebar mounting hardware for both sides
  • Left and right VPS plastic deflectors
  • VPS deflector fastening hardware
  • Left and right adjustable position wind extension deflectors
  • Installation instructions
Thumbnail

 Not recommended for Africa Twin, T7, Himalayan, or V-Strom.  Please see specific listings for those models.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Barkbusters VPS Replacement Plastics

$36.95

Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Cycra ProBend

$129.95

Construction of these handguards feature heavy duty aluminum guards with colored plastic deflector shields. They offer great protection from those trees that jump out at you on the trail and the cold wind and rain you encounter on the street. They feature a deep bend on the outer bar end for maximum freedom of hand placement and high quality bar mounts on the inside.

Select your desired color with the corresponding size mounts to fit your handlebar.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Cycra ProBend Replacement Plastics

$21.95

Replacement handguards for your Cycra set up. Injection-molded high-impact plastic replacements. Includes all hardware needed for mounting.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Deflectors Moose

$24.95

Fits Moose and other aluminum hand guards

  • Aerodynamic and stylish design
  • Protect hands from brush, water and cold wind
  • Simple installation
  • Sold in pairs
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Handguards, Enduro ¾ Grip Mitt - OBR ADV Gear

$74.99

The OBR ADV Gear Enduro ¾ Grip Mitt is your answer to cold fingers! Our ¾ open design terminates right at the wrist, but still offers full coverage of the hand while blocking the swirling air flow that freezes finger tips. Their ¾ open design does not cover important controls such as Hi/Lo Beam, Turn Indicator, or Kill Switches making this Grip Mitt perfect for both Off Road, Enduro, ADV, and ATV applications with full wrap hand guards.

Features

  • High strength and water resistant 1680d Ballistic Nylon construction 
  • Universal easy on/off Velcro snap strap attachment system
  • Reflective Front Strip for High Visibility
  • ¾ Open design provides full coverage of the hand while not impeding controls
  • Works with OEM and Full Shield (Cycra/Trackside) style hand guards (Hand guard system required for attachment)
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Molded Foam Moose

$30.95

Extra protection in bad weather to help keep your hands warm and dry. These nearly double the protection from most plastic type deflectors.

The outer shell is made from heavy-duty 500-denier nylon with 1/2" closed cell foam to keep the wind, cold and rain off of your hands.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, PowerMadd Fuzion

Choose Type
$99.95

FUZION guard feature the ultimate in hand protection with a unique design and flexible yet durable material. The expanded coverage area sweeps back toward your hand significantly increasing coverage making it perfect for cold, muddy or wet conditions. The FUZION features a unique two position mount and is constructed of molded light-weight closed-cell AEPE foam, which is crush-proof, water proof and extremely durable. The FUZION will work great for road of offroad riding, where wind deflection is important, and or bouncing off trees is a common occurrence. Kit includes mounts. Optional replacement mounts available.

Controls

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebars, Aero Fly Racing

$79.95

Comfortable Oversize (or Fat Bar) Handlebars. For bikes with standard 7/8" handlebars these will require the use of a 7/8 to 1-1/8  adapter. Black in color. Raise your bars and get rid of the crossbar that obstructs your view of the speedo. Works with stock controls and cables.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebars, Fly Racing

$41.95

These handlebars are high quality at an affordable price. Several bikes here in the shop use these bars and we like them.

  • 7/8" mounting area, fits stock mounts
  • Manufactured from 6061 T-6 aircraft grade aluminum
  • Knurled center section and clutch end
  • Bar pad is included
  • Reduces rider fatigue by absorbing impact, shock and vibration
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebars, SE ATV High ProTaper

$69.95

These 7/8" bars fit in the stock clamps and raise your grips a couple inches. They look great too!

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebar Riser, 2" Powermadd

Choose Bar Size
$59.95
  • 4.75" wide,
  • Requires 7/8" bar clamps on bike
  • Raises handlebars 2 inches and allows fore/aft position adjustment
  • Provides dual pivot points for optimal bar positioning
  • One piece design is made from solid aluminum for superior strength
  • Available for 7/8" - 7/8" or 7/8" - 1 1/8" bars
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Handlebar Riser, 2" ROX Anti-Vibration

Choose Color
$162.95

These versatile Risers allow you to clamp a 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1- 1/8" aluminum "fatbar". If you are thinking of going to a fatbar after you bend your stock set or just want the versatility and option to run any bar, this is the riser to go with. Reducers lock into risers to insure no slippage between components. Anti-Vibe Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations (use standard pivoting risers). These risers use 8mm bolts. Always check and confirm that your bike has adequate cable and brake line length before installing any handlebar risers.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Handlebar Riser, Rox Pro-Offset Elite Block

Choose Color
$94.95

This unique design from Rox allows you to move your bars either closer (1" up and back) or further away (1" forward and 1-1/4" up) depending on rider preference. These risers have an oblong mounting hole so that they will fit virtually any triple clamp with 8mm bolts. A set of reducers lock into the risers ensuring no slippage whether you have a 7/8" or 1-1/8" bars

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA ProCycle Approved

Grips, Heated A'ME Chicane

$129.95

This grip  features BluPulse™ ‘Adaptive Thermal Regulation’ technology, which combines thermal sensors in each grip with intelligent micro electronics in the external controller, and allows a rider to select between six temperature settings with a simple push of a button. A blue LED indicates both the selected temperature setting and heating status while the micro processor varies the amount of heat generated to maintain the selected temperature.

A key component with A’ME’s new Heated and Non-Heated Sport Bike Grips are five interchangeable throttle cable Cams that work in conjunction with the right hand throttle sleeve which will allow the grip to fit most bikes.

A’ME Chicane Sports Bike grips are composed of Vulcathane,™ a specially Blended rubber compound combined with UV stabilizing ingredients that exhibit superior oxidation and ozone resistance. As a result, A’ME M/C grips will not absorb moisture, deteriorate, harden or become slick with age, all the while providing and maintaining comfort.

NOTE: The A'ME thru-hole design also allows you to mount your stock or aftermarket bar ends.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Grips, Heated A'ME Full Waffle

$149.95

Features:

  • BluPulse™ Technology combines intelligent micro electronics with thermal sensors in each grip allowing the rider to select between six temperature settings
  • Ergonomic Design, reduces wrist and hand stress
  • Universal Throttle System designed to fit the vast majority of Sport and Dual Sport bikes
  • Intelligent power shut off system, prevents accidental battery power loss
  • Made of a specially formulated Valcathane™ material that produces a soft but durable surface
  • Glue-less design features molded grip on throttle slide and left hand Clamp-on grip
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Grips, Heated BikeMaster

Choose Controller
$59.95

Highly efficient design delivers warmth faster than traditional heated grips.

Choose from the standard five level push button temperature controller, or the LCD display controller which shows the selected heat level and available battery voltage.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Grips, Heated Koso Apollo

$129.95

The Apollo Heated Grips are designed with an integrated adjustable thumb switch, which allows them to easily fit on any kind of motorcycles on the market. The integrated thumb switch gives control to the rider to adjust the temperature level while keeping hands on the bar for a safer ride.

Its wide temperature setting range will keep the rider comfortable under the cold riding conditions.

The 5 color LED display will enhance the visual look of the heated grips and will allow the rider to quickly know at which heat level the grips are set.

This system will also detect if the battery voltage is too low and will automatically shut down the heated grips in order to make sure the rider have enough power to start the engine or use the motorcycle.

Specifications:

  • Integrated thumb switch designed for easy installation and control.
  • “Plug & Play” wiring connections to shorten the installation time.
  • Wide temperature settings for various weather conditions.
  • Low Battery Warning protection to ensure the motorcycle has enough power to start.
  • 5 color LED Indicators for the rider to quickly know in which heat level the grips are set.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Grips, ProGrip 714 Rally

Add Grip Glue
$10.95

 These grips feature a thicker design that dampens vibration. The soft shoulder allows ease of movement. Three wire-tie grooves are molded into the grip to make securing them a breeze. We think they are great!

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Grips, ProTaper Pillow Top

Add Grip Glue
$12.95

Reduces vibration and cushions impact. Inner core compound perfects the bonding interface with bars. Anti-Rip Tip™ uses denser compound to increase life of grip. Designed to self-clean and shed mud away from outer surface. Tacky gel-like surface compound is perfect for offroad and MX.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Grips, Renthal Single-Compound

Add Grip Glue
$13.95

Each pattern is available in three advanced synthetic rubber compounds. This means you can have the optimum combination of strength, tackiness and shock absorption to suit every riding condition and individual style. Soft grip is extremely soft, giving you a very comfortable ride, great feel and reduces the chance of blisters; however, because the grip is so soft, it wears quickly. Medium is a compromise between firm and soft. Firm grip has the same feel as a stock grip, it is very strong and has very good resistance to tearing and abrasion. Half Waffle has waffle pattern in finger area for traction and diamond pattern on palm side to reduce blisters. Full Waffle: designed after the CR Honda® grip.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Grips, Vans Cult - ODI

Add Grip Glue
$19.95
  • Feature the classic Vans waffle sole pattern with a subtle domed center section for improved ergonomics and vibration dampening
  • 125mm in length
  • Fit 7/8" bars
  • Sold in pairs
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Cruise Assist, "Crampbuster"

$10.95

This little jewel reduces hand fatigue and cramping on long rides or daily commutes. The Crampbuster is not a throttle locking unit but, rather a simple clip-on device which allows you to relax your grip while riding.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Cruise Control, Go Cruise

$19.95

The Go Cruise cruise control mounts over the throttle grip and rests on the brake lever to hold your throttle open, allowing you to stretch and rest your hand on long rides. Installs and removes in seconds with no tools. You can roll off the throttle manually to disengage the Go Cruise.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Throttle Tube "Tamer", G2 Ergonomics

CB500X '13 - '21
$79.95
  • Even out the abrupt initial power delivery to eliminate throttle snap that's especially evident with modern EFI bikes
  • Introduce a non-linear ratio between hand throttle and the carb or throttle body opening
  • Throttle cam's radius is reduced initially, which requires the rider to rotate the throttle slightly further to get the same opening position as stock; the radius increases after half-throttle to keep the full-throttle position at or near stock
  • Include a 400 throttle cam and a machined billet aluminum throttle tube with a knurled surface
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Brake Lever Short Black, PSR

CB500X '13 - '21
$69.95
  • Lightweight levers are CNC-machined from aluminum
  • Reach to the lever is adjustable to six positions
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Brake Lever V3 2.0, Vortex

CB500X '13 - '18
Choose Length
$84.95
  • 6-way adjustable
  • Available in short and long versions
  • Large radius lever surface
  • Improved ergonomics and rider comfort
  • Laser engraved Vortex logo
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Clutch Lever Short Black, PSR

CB500X '13 - '21
$69.95
  • Lightweight levers are CNC-machined from aluminum
  • Reach to the lever is adjustable to six positions
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Clutch Lever V3 2.0, Vortex

CB500X '13 - '18
Choose Length
$84.95
  • 6-way adjustable
  • Available in short and long versions
  • Large radius lever surface
  • Improved ergonomics and rider comfort
  • Laser engraved Vortex logo
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Lever, Parking Brake BrakeFix

$19.95

Attach this over your brake lever and hand grip, squeeze the brake lever, pull the locking bar in and lock the black portion down. This creates a locked front brake, making parking safe and secure with about 5 seconds of effort.

To unlock the BrakeFix, you just lift the back of the black hooking portion to release it. This takes about 2 seconds. Perfect for use with Snapjack type stands or just parking on an incline.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Mirror Mount Adapter

$18.95

Replaces all 2 bolt style clutch/brake lever mount clamps on your clutch or brake lever holder. Can help save space on short bend handlebars.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Mirror Mount, Split

$8.95

With the split back, you don't need to remove your grip or throttle tube, just put it on and tighten 'er down. Put the mirror in and hit the road. Clean and simple.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Mirror with Mount, KTM Style Folding

$29.95

This new mirror can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price. Fits either left or right side and includes handlebar mount.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Mirror, Doubletake

Choose Style
$47.95

Made from a nylon and fiberglass composite, these mirrors are extremely durable. They easily fold out of the way when you head off-road.

Enduro Mirror 4"

Ideal for dualsport use, where you want a low profile when folded down. SAE spec convex glass gives a much greater field of view than flat glass.

ADV Mirror 3" x 5"

Adventure mirrors are designed for adventure riding where you want your mirror extended most of the time.

Mirrors mount to any 10mm perch. Mirror and arm included as shown in pictures.

Thumbnail

Sold individually.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Mirror, Folding Dualsport

$22.95

This new mirror screws into your stock mirror mount but can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price. Fits either left or right side.

Sold individually. If a set is needed, order two.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Mirror, PSR Dualsport

Choose Mirror Shape
$47.95

PSR dual sport mirrors come with a slightly convex mirror for a wider field of vision behind you. The round mirror is 4.25" in diameter while the oval is 3.75" x 3". These mirrors are easily adjustable and fold out of the way quickly with the 1" RAM mounts.

The RAM Ball Stud Base used for both mirrors will go into any standard 10x1.25 threaded mirror base.

Thumbnail

Sold individually. If you need a set, please order 2.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Mirror, Trail Doubletake

$24.95

Just two inches in diameter, this is the smallest mirror available. Perfect for bikes meeting legal requirements for street legal rules. Simply zip-tie the mirror to your handlebars out of the way of brush and protected from crashes.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Mirrors, Bar-End Mount

$49.95

Bar end mounted mirrors move the mirrors out past your elbows so you can actually see what is behind you. They can mount with or without hand guards.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Cable Luber, Motion Pro

Add Cable Lubricant
$9.95

Keep your cables lubed up and working freely, with Motion Pro's Cable Luber. This tool is used to inject lubricant into any cable housing. Clamps over housing and cable allowing an aerosol can with nozzle to be connected. Once the lubrication solution runs out the far end, the cable is lubricated.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Cable Luber, V3 Motion Pro

Add Cable Lubricant
$19.95

Designed to seal completely around the cable housing and stop all those messy leaks. With the unit closed and sealed around the cable, your cable gets better lubrication and you waste less lubricant.

  • Works on most cables with a 4mm - 8mm O.D. housing.