- Features an innovative design; made of polypropylene
- 10 bright white LED bulbs ensure visibility at night and high illumination while using low power consumption
- LEDs can be used as turn signals and will not heat up after prolonged use
- 12V 35/35W H4 bulb with LEDs; total wattage is 50
- Universal fitment with anti-vibration rubber straps
- Position of mounting points allow ample room for brake line/cable
- Universal mounting strap included
- DOT-ECE-SAE-TÜV compliant
|Chain Size:||Front Sprocket:||Rear Sprocket:||Front Tire:||Rear Tire:||Spark Plug:|
- Nylon surrounding, removable polypropylene number plate, polycarbonate reflector, cast aluminum headlight body, clear polycarbonate lens cover and tempered glass lens
- Spotlight uses 55W halogen bulb; floodlight uses 55W halogen and 5W incandescent bulbs
- DOT and SAE compliant
The IQ-275 Intelligent Lighting Controllers from Skene Design allow you to quickly and conveniently set the brightness of your Squadron Pro headlight to match riding conditions. Often auxiliary lights are too bright or have too wide a lighting pattern to operate at full power during the day or under certain road conditions. With Skene Design's innovative intelligent lighting controllers you can pre-program several different brightness settings and with the flick of a switch immediately select the desired brightness.
Designed specifically for aggressive night time riding by combining amazing distance projection, wide peripheral spread and a smooth blend of near field light. Utilizes four Cree™ XM-L2 LEDs, the brightest, most efficient LEDs on the market giving you a blinding 4,900 lumens and 40 watts. The Squadron® Pro is plug and play making for an easy install.
Add the Skene Dimmer Kit to control the brightness to match riding conditions.
To run this kit on smaller bikes (below 400cc) you may need to have your stator rewound by Baja Designs. An aftermarket stator can be purchased instead of a rewind.
Become more visible and look cool while doing it. The ProCycle Natural Tank LED Light Kit will add more light to your bike with the push of a button.
Kit includes a handle bar mounted lighted switch, two 12" LED light strips with adhesive backing, four saddle splice connectors, and a center harness for connecting to your bikes harness.
Installation is quick and easy. More colors/images coming soon. *Please note All colors other than amber and white are recommended for off road use only*
The perfect solution for mounting those LED auxiliary lights. The base of the RAM mount is held by your mirror. This puts the light where you can easily adjust the angle for different riding situations. This mount fits VisionX Solstice lights or any other light with a 6mm or 1/4" hole in the mounting bracket.
This is for Mount Only. Sold individually.
10 Watt LED lights sold separately.
Each 10 watt Solstice Solo produces 900 lumens, which is roughly equal to a 50 watt halogen bulb. These are one of the brightest LED off road lamps on the market. The rugged and compact 2” x 2” square die-cast aluminum housing makes mounting easy. The Solstice Solo also features a 4 sided channel design that allows you to interlink it on all four sides with other Solstice Solo pods. Includes stainless steel mounting bracket and waterproof connection. Choose narrow, medium, wide or elliptical light beam pattern. Our favorite is the Elliptical pattern which is wide and flat, putting most of the light where you need it the most.
This frame includes six, white, full-spectrum LED bulbs on a 6-inch strip for bright illumination of your license plate. It is made in a sturdy cast aluminum, and is powder coated with a durable black finish.
Outside frame dimensions are 7.25" in. wide by 4.2". Center to center mounting hole distance is 5.7 in. All mounting hardware is included.
License plate bolt with bright white LED light. The simple way to light up your plate.
License plate light with 3 LEDs. Very compact and easy to mount. Meets plate illumination requirements with super white light.
This is for the LED license plate light ONLY. See above for the stainless steel license plate bracket.
The Click'n'Ride signals are the quick release turn signals we have all been waiting for. The turn signal base socket will be mounted and wired to stay on the motorcycle. Each turn signal is equipped with a quick release bayonet which easily presses into the mounting socket. This kit is perfect for making a quick conversion from a road-going dual sport to a trail-ready dirt bike.
- Vibration-proof components
- Easy fit sockets
- Quick release Bayonet
- Seamless ultra-sonic sealed lens (dust and waterproof)
- 3D lens optics
- Philips LED's
- Moisture, mud & dust guard
- 1 quick release indicator – LEFT hand indicator
- 1 quick release indicator – RIGHT hand indicator
- 2 Sockets with Moisture Guard and wiring (bullet ends)
- 2 nylon spacers (1mm)
- 2 nylon spacers (2mm)
*Please note: LED turn signals require an LED flasher,
*Bikes with single dash indicator require a diode kit,
*If using a combination of conventional and LED signals then a resistor is required.
Roll-up pouch ideal for tucking away your lights when out on the trail.
Ultra bright amber LED turnsignals offer nearly the same visibility in a much smaller package. 15 amber LEDs in every signal. Flexible rubber stalks. Requires a LED turn signal to flash properly.
Pack of Two
Replacement Halogen bulbs for mini style turn signals. Sold in a pack of 5 bulbs.
These LED lights feature a metal spring in the stalk allowing it to bend in any direction without breaking.
- Flexible stalk, 180 degree deflection
- Ultra tough housing and lens
- All weather
- Sold in pairs
These bright LED turn signals will bend more than 90 degrees without damage. Only 2 1/2" long.
- Sold in pairs
- Requires LED flasher unit
- Bikes with a single dash indicator require a diode kit
Clear lens, amber LED type lights. Short flexible stems. Very small, only 2 7/8" long. Requires a LED turn signal flasher to flash properly.
These signals have short rubberized flexible stems and bright mini halogen bulbs.
Triangle/Teardrop style signals with LEDs. Mounts on any flat surface to keep out of the way of brush, branches, and your exhaust system. Requires LED flasher or LED turn signal resistors to flash properly. Sold in a pack of 2 signals.
This Diode Kit is only necessary if you have a single indicator for your turn signals. One dash light for both left and right signals (such as on the DR650).
This kit allows power to flow in just one direction from the LED signals to the indicator light regardless of which direction you are signalling.
This devices allows any two wire after market LED turn signal indicators to operate as running lights (always on), and will blink on / off when the turn signal switch is activated. It is highly recommended to use this product with the Fixed Rate Turn Signal Flasher. Each package contains one dual adapter, good for operating both turn signals, left and right, with the appropriate kit. Please order the Front kit to turn the FRONT flashers into running lights and the REAR kit to turn the rear flashers into running lights.
Comes with factory connectors to make installation easier by plugging into the factory harness turn signal connectors. Works with any two wire aftermarket LED turn signal indicators.
You may have noticed after adding aftermarket turn signals (especially LED units) that your blink rate has significantly increased. OEM flashers are designed for standard bulbs which draw a few watts each, much more than typical aftermarket bulbs or LED signals. This device is an effective alternative to using load resistors because it consumes considerably less watts, consumes less space, and does not generate excessive heat.
The plug is exactly the same as the OEM unit making swap outs a cinch. No wiring changes, cutting and adding connectors. Just plug it in and you will have a steady flash at the DOT OEM rate regardless of what signal bulbs you use. It is an all solid state design and will blink correctly with loads all the way down to 0.1W / 0.01A.
This type of flasher is required for LED turn signals. For DC (battery) systems only. Includes 2 female connectors for universal fit.
Works on AC and DC lighting systems
Allows LED type turn signals (and low wattage flush mounts) to flash using a standard flasher unit. Connectors included. One kit works with 4 signals.