Many suppliers are experiencing HUGE increases in demand and Covid related supply chain delays.

The quickest way to get your item is to place your order now which guarantees your place in line.

CRF150F

The CRF line was launched in 2000 as a successor to the Honda XR series. The trail friendly CRF-F's have simple air-cooled 4-stroke engines. Typically, these bikes come in low-power and confidence inspiring configurations for newer riders.

Chain Size:        Front Sprocket:             Rear Sprocket:             Front Tire:         Rear Tire:          Spark Plug:
520x104

13T ('03-'05)

13T ('06-'18)

48T ('03-'05)

47T ('06-'18)

70/100-19 90/100-16

DPR8EA-9 ('03-'05)

CPR8EA-9 ('06-'18)

 

Featured Products

We start with Excel or Sun rims, OEM hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike.

Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.

  • New OEM hubs with bearings and seals installed
  • Excel 2.5" x 17" or Sun 2.75" x 17" front rim
  • Excel or Sun 3.5" x 17" rear rim
  • Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples

Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.

 Wheels are custom made to order and cannot be canceled. Please allow 2-3 weeks for delivery.

$1,249.00

Pre-Order

ProCycle's custom calendar features specially selected customer submitted photos from around the world.  Real riders on real adventures.

New for 2022:  Each of the two calendar sizes will feature different pictures.  Even more reason to get both!

The desk top is 6" by 3.75" the perfect size to sit on your desk.

The wall calendar is 11" by 17" when fully open for use on your wall.  Includes a short story of the featured picture, bike, and rider.

Choose Size
$17.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

CDI Rev Box, ProCycle

CRF150F '03 - '05

ProCycle Rev Box increases the rev limit to 10,000 RPM. In addition, this unit offers a re-mapped timing curve which yields a noticeable increase to horsepower and torque over the stock CDI

This CDI box is a direct plug in replacement CDI. Simply locate and remove the stock CDI, and plug the unit directly into the wiring harness, no modification needed. Suitable for stock and modified machines

$59.95

Our logo on a 20oz double wall 18/8 stainless steel thermal tumbler with copper vacuum insulation, threaded snap-fit lid, and powder coated finish.

The copper plating on the inner wall is an extra defense against temperature transfer.  Heat escapes much slower so your hot coffee stays hot even in a snow storm, and heat enters much slower so your ice water doesn't melt even under a blistering summer sun.

We have tested this bottle with 160° water placed on it's side for 7 hours mimicking being in a saddle bag with coffee from the morning campsite. The bottle did not leak when the lid was properly secured and the water only dropped to 113° at the end of our test.

Pair it with the OBR bottle wrap for even better value and have a holder on your luggage for your new bottle for ease of access and security.

Choose Option
$24.95

Engine

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Big Bore Kit, 175cc BBR

CRF150F '03 - '05

Big bore kit for the 2003-2005 CRF150F. A simple bore in bore kit that includes BBR's high performance camshaft and valve springs for added performance. This cam features higher lift and duration than stock. Complete kit includes piston, rings, pin, clips, BBR MX cam, valve springs and gaskets. This is the quickest way to add the most power to your bike. Great when combined with our exhaust system, Rev-Box, and Free-Flow airfilter. Requires machining of stock cylinder for installation.

  • Adds up to 3.5 HP
  • 67mm piston, pin, clips, and rings
  • 10.75:1 compression ratio
  • Includes head and base gaskets
  • Makes more aggressive style of power
  • Bike still starts easily and idles smooth
  • Same camshaft as used by the BBR Race Team
  • Requires professional boring of your stock cylinder

 

$299.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Big Bore Kit, 195cc BBR

CRF150F '06 - '22

High quality bore kit that shows substantial power gains throughout the RPM range. 65mm piston. 9.8:1 compression ratio allows use of premium pump gas. Complete kit includes: cylinder, piston, ring set, pin, clips and gaskets.

  • All new design
  • Brand new high quality BBR aluminum cylinder
  • 9.8:1 compression ratio
  • 65mm piston
  • Includes cylinder, piston, pin, rings, and gaskets
$249.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Camshaft, Performance BBR

CRF150F '03 - '05

High performance camshaft for the CRF150F 03'-05' and CRF230F. Higher lift and duration than stock.

  • Adds 1+ HP to fully modified motor
  • Makes more aggressive race-style of power
  • Bike still starts easily and idles smooth
$154.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Clutch Springs, Heavy-Duty

CRF150F '03 - '22

Heavy-duty springs help prevent clutch slip in high-performance motors.

  • Custom wound from chrome-silicon wire
  • Preset for long life
  • Higher spring seat pressure to resist clutch slip
$24.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Valve Springs, Heavy-Duty BBR

CRF150F '03 - '22

These valve springs are required when using the BBR High Performance camshaft for the CRF150/230F.

  • Built from the highest quality chrome-silicon wire
  • Fully shot-peened and preset for long life
$49.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Oil Filter Magnet

CRF150F '03 - '17
  • Reduce wear, and significantly increase your engine life.
  • Easy to install. Place on outer side of filter.
  • Powerful magnet traps abrasive metal particles down to 1 micron. OEM oil filters only filter particles down to 90 microns, leaving behind the most harmful particles to circulate through your engine.
$5.95

Hardened chrome vanadium steel with built in rubber insert to hold spark plug steady.

Thin wall bi-hex sockets designed to access narrow spark plug holes.

Fits 3/8" square drive and hex drive, 16mm, 18mm, 21mm.

Choose Size
$14.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Spark Plug, Iridium NGK

CRF150F '03 - '17

Iridium spark plugs are made with premium quality materials.

Iridium plugs last longer than standard ones, meaning you won't have to replace them as often.

  • The ultimate in the evolution of spark plug technology and performance from an industry leader
  • The iridium electrode is 25% smaller than a platinum electrode, and it's just 1/4 the size of a conventional nickel electrode
  • Ultra-small diameter center electrode reduces voltage requirement and extends ignition system life
  • Metal shell plating has enhanced anti corrosion qualities

Sold individually, unless otherwise stated.

Add Lubricant
$10.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Spark Plug, Standard NGK

CRF150F '03 - '17

Keep your motor running right with a fresh plug.

NGK Spark Plugs is the largest OE supplier and manufacturer of spark plugs in North America.

  • Superior construction for serious power
  • NGK makes plugs for almost every application and riding style
  • Versatile plugs with wide operating heat ranges prevent fouling from running too cool and preignition from running too hot
  • Feature high alumina ceramics for improved heat dissipation and electrical insulation, deep-seated copper core for a wider heat range and a nickel alloy tip for longer life

Price reflects the quantity of spark plugs required for your make and model.

Choose Spark Plug
Add Lubricant
$9.95

Includes degree wheel, dial-gauge, multi-position stand, extension, 3-sizes of positive-piston stops, and a handsome wooden carrying case.

$199.95

Made from medium carbon steel with hardened jaws. It features spanner pins and the jaws open up to 5" wide. It's ideal for holding clutch hubs, flywheels, gears, sprockets, etc. Made by Motion Pro.

$28.95

This tool is designed to separate vertically split crank case halves on two and four stroke engines. Adjustable arms allow it to be used on multiple bolt patterns found on a variety of makes and models of motorcycles. Industrial grade steel construction with black oxide finish for long service life. Comes with 8mm mounting bolts and 6mm adapters. Protective carrying case included.

$99.95

For easy removal of recessed oil filters.

Conical point screws pierces and grabs the metal end cap of the filter.

reduces potential damage to the engine cases.

NOT for use on re-usable oil filters.

$9.95

A 3-pack of easy to apply strips measure the temperature of engine, suspension, and radiator components. Temperature range 146° to 248°

$14.95

Thread Chasers are designed to clean and re-cut damaged aluminum threads.

this kit contains the two sizes most common on metric motorcycles, M6x1.0 and M8x1.25.

Thread Chasers also remove dirt and metal shavings that become captured in thread grooves.

Uses 8mm or 10mm hex sockets, a Must for all tool kits.

$4.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Valve Adjustment Wrench

CRF150F '03 - '22

A 'wrench style' tool to turn the 'square top' tappet screws. The wrench does a better job of holding the adjuster screw still while tightening the locknut. Slim and flat, this tool is easy to carry in a tool pack.
 

$13.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Valve Adjustment Wrench Set

CRF150F '03 - '22
  • Allows precise valve lash adjustment without disturbing the setting when the lock nut is fastened
  • Knurled knob on adjuster drivers ensure a precise and secure grip
  • Integrated repositionable wrench handle holds the lock nut while the drivers are used to loosen or tighten the valve adjustment screw

Included Items:
(1) 10mm chrome steel socket wrench
(1) 3mm square tappet adjuster

$34.95

Fuel and Intake

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Air Filter, K&N

CRF150F '03 - '22
  • Increased air flow over the stock air filter
  • Designed to increase horsepower and throttle response
  • Designed to fit inside the factory air box
  • Larger surface area over foam filters which offers longer service intervals in dusty conditions
  • Four layers of premium cotton gauze provides outstanding filtration
  • Washable & re-usable, never wears out
  • One filter will last the lifetime of your bike
$60.95

Sold in 6 packs

  • Compatible with many air filter boxes.
  • More air flow allows you to add more fuel to your intake mixture, increasing performance.
  • 1" Diameter
$13.95

This canister by Pro Circuit allows you to move the overflow tubes from the carburetor up and out of the way. Universal application.

$39.95

Quick release one-piece clamps that saves space. These are great for fuel lines, controlling wires, and can be used many times.

Comes with 4 each of 8mm, 9mm 10mm, and 12mm.

No special tools needed, from Helix Racing.

$8.95

Gas Tanks

If you're like us, you hate the long floppy vent hose hanging off the cap of your aftermarket tank. This one-way vent cap replaces the long hose with a short one only about 2" long. It allows air into your tank but prevents fuel from sloshing out. Machined from billet alloy and anodized for good looks.

  Not for stock fuel tanks!

$11.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Gas Cap, BBR Billet

CRF150F '03 - '12
  • Billet machined aluminum gas cap with gold anodized breather
  • Large grip area for easy spin on/off
$64.95

The small size and right angle hose barbs make this filter easier to fit into the small space between your fuel petcock and carburetor. Filter body is only 7/8" diameter. Straight filter is 2" long, 90 degree filter is only 1-5/8" long.

Choose Type
$24.95

This filter is meant for 5/16" fuel lines. Only 1/2" thick it is small enough to fit just about anywhere.

Choose Pack
$17.95

Fuel supplies can be sketchy at times. This filter lives in your tank to trap dirt and debris as it is poured into the tank. Features a custom shaped adapter that fits securely under the gas cap, creating a leak-proof seal. If it stays out of your fuel, it can't get into the carburetor! Created by the filter experts at Twin Air, this filter fits IMS,  Acerbis and Safari brand gas tanks.

Choose Tank Type
$35.95

Ordering new fuel line? How about a set of fresh zinc plated clamps to go with it?

These will be sure your fuel line stays connected. A pack of 8 clamps in 2 sizes to fit most 1/4 or 5/16 fuel hose.

$5.95

Hose reducer to go from 5/16" line down to 1/4" line. Many bikes have 5/16" carburetor spigots but most aftermarket petcocks are 1/4". This solve the problem of mismatched sizes. Solid brass construction. Can be used to route or repair fuel lines, oil lines or air lines. Barbed ends provide a secure fit.

$8.95

30" lengths. Sizes shown are ID. All of these lines are stronger and more durable than vinyl fuel lines and are resistant to swelling, UV light, as well as hardening and cracking.

Choose Type
$8.95

Need to mount two containers? A water and a fuel? Two waters? Already have a RotoPax Mount for a single container? Get this extender to work in conjunction with a pack mount and that will be no problem! Single mount, two containers.

 

$34.95

RotoPax holder made to mount a single Fuel and/or Water container.

Need to mount two containers? A water and a fuel? Two waters? Get the extender which allows you to stack two containers no problem! Single mount, two containers

Add Extension Mount
$35.95

RotoPax are Rotational Molded - the process which produces indisputably superior products.

  • Thicker walls and stronger construction
  • Bright colors that are less prone to fading
  • Extra threads, thicker walls, and sure-seal gasket guarantee no leaks

Need to mount two containers? A water and a fuel? Two waters? Finally, you can stack multiple packs together! Use in conjunction with a pack mount. You will need to purchase the Single Mount as well as the Extender.

Choose Container
Add Container Mount
Add Extension Mount
$64.95

Auxiliary fuel tanks mount to handlebars, forks, or rear racks.

  • Suitable for minis, trials bikes, full size bikes, and anywhere else a little extra fuel is needed.
  • Each tank includes a siphon kit that connects the tank to the main fuel tank and automatically siphons fuel while the bike is being ridden.
  • With this design, the auxiliary tank empties first, before the main tank.
  • Does not interfere with headlight, handguards, rear seat, etc.
Add Fuel Stabilizer
$112.95

This Super Siphon has  a (1/2 inch x 6 foot) long hose, which makes it quite easy to transfer fuel from one bike to another! Simply, shake the hose to prime it and get fuel moving.  The hose is resistant to gasoline and any other hazardous chemicals. Roll it up, stuff it in your bag and you will be very happy whenever you need it.

$19.95

Body

Windscreen attaches to your bike's handlebars. Fully adjustable mounting brackets. Includes 7/8' handlebar clamps.  14" tall & 10" wide.

  Will not fit 1 1/8" oversize handlebars.

Choose Color
$129.95

Puig Visor Clip-On

  • Suitable for screens with thickness between 3-5mm
  • Multi-adjustable visor adaptable to Puig and OEM windscreens
  • Visor is mounted by clip-ons and does not need to be drilled to the windscreen
  • Visor sizes available include 90x230mm, 100x277mm and 102x325mm
$119.95

Universal design.  Vents in the back improve airflow to motor.  Smaller front reduces 'wind steer' and improves high speed stability.

$28.95

This frame includes six, white, full-spectrum LED bulbs on a 6-inch strip for bright illumination of your license plate. It is made in a sturdy cast aluminum, and is powder coated with a durable black finish.

Outside frame dimensions are 7.25" in. wide by 4.2". Center to center mounting hole distance is 5.7 in. All mounting hardware is included.

$29.95

Adhesive heat shield for your new side panel plastics to protect it from the heat of your muffler.

$14.95

Seats

This is the secret for being able to put in those 500 mile days. Even a good touring seat can feel a bit firm after a couple hundred miles. Sheepskin gives that little bit of 'cush' and provides superior air circulation. Velcro straps allow easy removal when you don't need it. Measures 14" wide by 19" long.

$69.95
  • Air filled AirHawk 12"x18" cushion custom fits your shape and redistributes pressure that causes numbness and discomfort when you ride
  • Seat cushion cover is constructed of a breathable, stretchable Nylon/Lycra blend with a non skid Urethane base
  • Open mesh side panels allow heat to escape
  • Easily inflates by mouth with no pump needed
  • Mounting straps and Repair patch kit included
$112.95

9" by 9" carbon fiber seat warmer that goes between your seat cover and the foam to keep your backside happy on those really cold days. This improved design produces 25% more heat than most other warmers using just 30 watts.

Kit includes the warming unit, with connector, 24" extension cable, rocker-type on/off switch and stub to splice into your wiring along with complete detailed instructions.

$79.95

Armor - Bike Protection

This bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.

Choose Finish
$173.95

This bash plate is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All bash plates are supplied with the necessary stainless clamps and bolts where possible. All bash plates have a polished finish and have foam or rubber where required.

Choose Finish
$173.95

Contoured alloy hand guards with inner mounts, allow space for the clutch cable and brake hose.

Images show a set of these hand guards installed on a set of CR High Gunmetal Fly Handlebars with large black deflectors. The far right image shows the need to flip the brackets that attach to the bar on the clutch and front brake side. On the front brake side the clamp must go over the front brake line while on the clutch side it goes under the cable.

Note: This kit includes the handguards only. Deflectors sold separate, can be added by selecting color from drop down menu.

Choose Handguard
$67.95
  • High-impact, composite injection-molded outer guard around an anodized aluminum inner guard
  • Includes an indexed steel bar-end insert that mounts solidly and prevents Rally Pro handguards from slipping – even under the most demanding conditions
  • Small integral spoiler incorporated into design
  • X-Strong universal silver mount kit that fits 7/8” (22mm), Pro Taper 1 1/8"(28mm), Magura and Twin Wall aluminum handlebars included.

Some models with adjustable windscreens may need the windscreen rotated forward, such as the Royal Enfield Himalayan, to avoid contact at full lock. These are not compatible on Honda CB500X's and Honda Africa Twins.

 

$104.95

These handguards come with mounts that will work on both standard and and oversize bars. The aluminum wrap-around bar is the biggest on the market with two large plastic shields that are also some of the largest available. The X-Factor hand guards offer great protection from the elements, especially during those colder months when you're trying to stretch out your riding season.

Works with 7/8" or 1-1/8" bars.

  X-Factor guards require you to cut your lever ends down, or use short levers.

$139.95

Replacement handguards for your Acerbis set up. Tough Polypropylene shields with a larger 6" outer diameter, built for extreme riding conditions.

$22.95

The X-Factory Handguards from Acerbis feature a steel bar wrapped with an injection molded Nylon composite. A replaceable dual injected polypropylene shield mounts to the bar offering insurmountable protection from roost, debris, and extreme conditions.

A universal mount kit is included that allows for mounting on either 7/8" or 1 1/8" handlebars.

$99.95
  • Designed to minimize handlebar vibration for Barkbuster Handguards that can’t accomodate OEM handlebar weights.
  • Sleek aerodynamic look.
  • Forged Steel with powder coat finish.
  • Fit in conjunction with most Barkbusters backbones (except EGO).
  • Fits externally to the VPS backbone.
  • Available in black.
  • Sold as a pair

Weight:
360 grams/pair or
180 grams/each

Fitment Notes: If you have a hardware kit listed below see special fitting notes as additional parts may be required

BHG-010             Requires two additional M6x40mm countersunk bolts

BHG-032             R1200GS/A requires two additional M8x55mm countersunk bolts

BHG-045              G650GS requires two additional M6x65mm countersunk bolts

BHG-050              Will not fit

BHG-051              Requires two additional M6x50mm countersunk bolts

BHG-059              Tiger XC, XCA & XCX (all ’15 on) use M6x45mm bolt from BHG-059 kit

BHG-075              Will not fit

BHG-079              Will not fit

$45.95

Extend your comfortable riding season with Barkbusters BBZ cold weather protection handguards. Designed to fit with or without existing Barkbusters backbones or handlebar weights, these guards offer superb wind protection without limiting access to your grips or controls. Simple to install, they can be mounted or removed within ten minutes without permanent modifications. Ride with less bulky gloves in colder weather with the Barkbusters BBZ cold weather protection handguards.

Features:

  • Fits most motorcycle handlebars
  • Maximum cold weather protection
  • Compatable with or without Barkbusters backbones
  • Lined with waterproof membrane
  • Windproof
  • Full wrap design
  • Allows full access of controls
  • Does not block view of handlebar thumb controls
  • Simple to install and remove

Whats in the box:

  • Two BBZ cold weather handguards
  • Mounting hardware
  • Instructions
$99.95

Protect your hands and levers with the Barkbusters Storm lever and weather protection handguards. Full wrap solid heat treated aluminum bars with secure two point mounts on each side provide strength while attractive and generous guards provide shelter from the wind and weather. Ride longer with the Storm handguards and complete mounting kit by Barkbusters.

Features:

  • Two mounting points provide secure protection
  • Full wrap guards
  • Heat treated aluminum backbone bars
  • Easy installation
  • Tough and weather shielding Storm handguards
  • Aluminum backbones are compatible with all Barkbusters deflector guards

What's in the box:

  • Left and right aluminum backbone bars
  • Inner and outer handlebar mounting hardware for both sides
  • Left and right Storm plastic handguard deflectors
  • Installation instructions

  Not recommended for Africa Twin, T7, Himalayan, or V-Strom.  Please see specific listings for those models.

NOTE: tapered kit will not fit Renthal Twin Wall or Barkbusters VSBar

Choose Kit
Add Barkbuster Indicator Lights
Add Resistor Set
Add Bar End Weights
$119.95

Keep your hands and controls protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Heat treated aluminum backbones with two mounting points of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors, available in multiple colors, provide protection for your hands from the wind and brush. Ride longer, more comfortably with Barkbusters VPS lever and wind protection handguards

Features:

  • Two mounting points provide secure protection
  • Full wrap guards
  • Heat treated aluminum backbone bars
  • Includes VPS left and right plastic deflectors
  • Easy installation

What's in the box:

  • Left and right aluminum backbone bars
  • Inner and outer handlebar mounting hardware for both sides
  • Left and right VPS plastic deflectors
  • VPS deflector fastening hardware
  • Left and right adjustable position wind extension deflectors
  • Installation instructions

 Not recommended for Africa Twin, T7, Himalayan, or V-Strom.  Please see specific listings for those models.

NOTE: tapered kit will not fit Renthal Twin Wall or Barkbusters VSBar

Add Barkbuster Indicator Lights
Add Resistor Set
Add Bar End Weights
$116.95

Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards.

$36.95

Construction of these handguards feature heavy duty aluminum guards with colored plastic deflector shields. They offer great protection from those trees that jump out at you on the trail and the cold wind and rain you encounter on the street. They feature a deep bend on the outer bar end for maximum freedom of hand placement and high quality bar mounts on the inside.

Select your desired color with the corresponding size mounts to fit your handlebar.

Please Note: These handguards do not fit the Yamaha T7

$129.95

Replacement handguards for your Cycra set up. Injection-molded high-impact plastic replacements. Includes all hardware needed for mounting.

$21.95

Fits Moose and other aluminum hand guards

  • Aerodynamic and stylish design
  • Protect hands from brush, water and cold wind
  • Simple installation
  • Sold in pairs
$24.95

The OBR ADV Gear Enduro ¾ Grip Mitt is your answer to cold fingers! Our ¾ open design terminates right at the wrist, but still offers full coverage of the hand while blocking the swirling air flow that freezes finger tips. Their ¾ open design does not cover important controls such as Hi/Lo Beam, Turn Indicator, or Kill Switches making this Grip Mitt perfect for both Off Road, Enduro, ADV, and ATV applications with full wrap hand guards.

Features

  • High strength and water resistant 1680d Ballistic Nylon construction 
  • Universal easy on/off Velcro snap strap attachment system
  • Reflective Front Strip for High Visibility
  • ¾ Open design provides full coverage of the hand while not impeding controls
  • Works with OEM and Full Shield (Cycra/Trackside) style hand guards (Hand guard system required for attachment)
$74.99

Extra protection in bad weather to help keep your hands warm and dry. These nearly double the protection from most plastic type deflectors.

The outer shell is made from heavy-duty 500-denier nylon with 1/2" closed cell foam to keep the wind, cold and rain off of your hands.

$35.95

FUZION guard feature the ultimate in hand protection with a unique design and flexible yet durable material. The expanded coverage area sweeps back toward your hand significantly increasing coverage making it perfect for cold, muddy or wet conditions. The FUZION features a unique two position mount and is constructed of molded light-weight closed-cell AEPE foam, which is crush-proof, water proof and extremely durable. The FUZION will work great for road of offroad riding, where wind deflection is important, and or bouncing off trees is a common occurrence. Kit includes mounts. Optional replacement mounts available.

Choose Type
$99.95

Controls

Comfortable Oversize (or Fat Bar) Handlebars. For bikes with standard 7/8" handlebars these will require the use of a 7/8 to 1-1/8  adapter. Black in color. Raise your bars and get rid of the crossbar that obstructs your view of the speedo. Works with stock controls and cables.

$79.95

These 7/8" bars fit in the stock clamps and raise your grips a couple inches. They look great too!

 

$69.95

These 7/8" Silver bars fit in the stock clamps.

  • Width 815mm
  • Height 113mm
  • Rise 84mm
  • Clamp Area 173mm
  • Sweep 49mm
  • Control Area 206mm
$73.95
  • 4.75" wide,
  • Requires 7/8" bar clamps on bike
  • Raises handlebars 2 inches and allows fore/aft position adjustment
  • Provides dual pivot points for optimal bar positioning
  • One piece design is made from solid aluminum for superior strength
  • Available for 7/8" - 7/8" or 7/8" - 1 1/8" bars
Choose Bar Size
$74.95

These versatile Risers allow you to clamp a 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1- 1/8" aluminum "fatbar". If you are thinking of going to a fatbar after you bend your stock set or just want the versatility and option to run any bar, this is the riser to go with. Reducers lock into risers to insure no slippage between components. Anti-Vibe Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations (use standard pivoting risers). These risers use 8mm bolts. Always check and confirm that your bike has adequate cable and brake line length before installing any handlebar risers.

Choose Color
$162.95

This unique design from Rox allows you to move your bars either closer (1" up and back) or further away (1" forward and 1-1/4" up) depending on rider preference. These risers have an oblong mounting hole so that they will fit virtually any triple clamp with 8mm bolts. A set of reducers lock into the risers ensuring no slippage whether you have a 7/8" or 1-1/8" bars

Choose Color
$94.95

Features:

  • BluPulse™ Technology combines intelligent micro electronics with thermal sensors in each grip allowing the rider to select between six temperature settings
  • Ergonomic Design, reduces wrist and hand stress
  • Universal Throttle System designed to fit the vast majority of Sport and Dual Sport bikes
  • Intelligent power shut off system, prevents accidental battery power loss
  • Made of a specially formulated Valcathane™ material that produces a soft but durable surface
  • Glue-less design features molded grip on throttle slide and left hand Clamp-on grip
$149.95

Highly efficient design delivers warmth faster than traditional heated grips.

Choose from the standard five level push button temperature controller, or the LCD display controller which shows the selected heat level and available battery voltage.

Choose Controller
$59.95

The Apollo Heated Grips are designed with an integrated adjustable thumb switch, which allows them to easily fit on any kind of motorcycles on the market. The integrated thumb switch gives control to the rider to adjust the temperature level while keeping hands on the bar for a safer ride.

Its wide temperature setting range will keep the rider comfortable under the cold riding conditions.

The 5 color LED display will enhance the visual look of the heated grips and will allow the rider to quickly know at which heat level the grips are set.

This system will also detect if the battery voltage is too low and will automatically shut down the heated grips in order to make sure the rider have enough power to start the engine or use the motorcycle.

Specifications:

  • Integrated thumb switch designed for easy installation and control.
  • “Plug & Play” wiring connections to shorten the installation time.
  • Wide temperature settings for various weather conditions.
  • Low Battery Warning protection to ensure the motorcycle has enough power to start.
  • 5 color LED Indicators for the rider to quickly know in which heat level the grips are set.
$144.95
  • Ergonomically designed
  • Medium-density Thermoplastic Rubber (TPR) compound provides excellent feedback and control, without sacrificing durability
  • Full diamond pattern for an unparalleled feel in both wet and dry conditions
  • Inner diameter optimized to keep grips secure in any conditions
  • 115mm overall length; fit 7/8" bars and throttle sleeves
$10.95

These grips feature a thicker design that dampens vibration. The soft shoulder allows ease of movement. Three wire-tie grooves are molded into the grip to make securing them a breeze. We think they are great!

Add Grip Glue
$12.95

Reduces vibration and cushions impact. Inner core compound perfects the bonding interface with bars. Anti-Rip Tip™ uses denser compound to increase life of grip. Designed to self-clean and shed mud away from outer surface. Tacky gel-like surface compound is perfect for offroad and MX.

Add Grip Glue
$13.95

Each pattern is available in three advanced synthetic rubber compounds. This means you can have the optimum combination of strength, tackiness and shock absorption to suit every riding condition and individual style. Soft grip is extremely soft, giving you a very comfortable ride, great feel and reduces the chance of blisters; however, because the grip is so soft, it wears quickly. Medium is a compromise between firm and soft. Firm grip has the same feel as a stock grip, it is very strong and has very good resistance to tearing and abrasion. Half Waffle has waffle pattern in finger area for traction and diamond pattern on palm side to reduce blisters. Full Waffle: designed after the CR Honda® grip.

Add Grip Glue
$13.95
  • Feature the classic Vans waffle sole pattern with a subtle domed center section for improved ergonomics and vibration dampening
  • 125mm in length
  • Fit 7/8" bars
  • Sold in pairs
Add Grip Glue
$19.95

This little jewel reduces hand fatigue and cramping on long rides or daily commutes. The Crampbuster is not a throttle locking unit but, rather a simple clip-on device which allows you to relax your grip while riding.

$10.95

The Go Cruise cruise control mounts over the throttle grip and rests on the brake lever to hold your throttle open, allowing you to stretch and rest your hand on long rides. Installs and removes in seconds with no tools. You can roll off the throttle manually to disengage the Go Cruise.

$19.95

Attach this over your brake lever and hand grip, squeeze the brake lever, pull the locking bar in and lock the black portion down. This creates a locked front brake, making parking safe and secure with about 5 seconds of effort.

To unlock the BrakeFix, you just lift the back of the black hooking portion to release it. This takes about 2 seconds. Perfect for use with Snapjack type stands or just parking on an incline.

$19.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Shift Lever, BBR

CRF150F '03 - '22

Folding tip, forged aluminum shift lever from BBR Motorsports. Stronger and lighter than the stock shift lever.

  • Strong forged aluminum construction
  • Steel knurled folding tip (chrome plated)
  • Anodized titanium finish
  • 1/2" longer than stock
$39.95

Replaces all 2 bolt style clutch/brake lever mount clamps on your clutch or brake lever holder. Can help save space on short bend handlebars.

$18.95

With the split back, you don't need to remove your grip or throttle tube, just put it on and tighten 'er down. Put the mirror in and hit the road. Clean and simple.

$11.95

This new mirror can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price. Fits either left or right side and includes handlebar mount.

$29.95

Made from a nylon and fiberglass composite, these mirrors are extremely durable. They easily fold out of the way when you head off-road.

Enduro Mirror 4"

Ideal for dualsport use, where you want a low profile when folded down. SAE spec convex glass gives a much greater field of view than flat glass.

ADV Mirror 3" x 5"

Adventure mirrors are designed for adventure riding where you want your mirror extended most of the time.

Mirrors mount to any 10mm perch. Mirror and arm included as shown in pictures.

Sold individually.

Choose Style
$50.95

This new mirror screws into your stock mirror mount but can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price. Fits either left or right side.

Sold individually. If a set is needed, order two.

$22.95

PSR dual sport mirrors come with a slightly convex mirror for a wider field of vision behind you. The round mirror is 4.25" in diameter while the oval is 3.75" x 3". These mirrors are easily adjustable and fold out of the way quickly with the 1" RAM mounts.

The RAM Ball Stud Base used for both mirrors will go into any standard 10x1.25 threaded mirror base.

Sold individually. If you need a set, please order 2.

Choose Mirror Shape
$47.95

Just two inches in diameter, this is the smallest mirror available. Perfect for bikes meeting legal requirements for street legal rules. Simply zip-tie the mirror to your handlebars out of the way of brush and protected from crashes.

Sold individually.

$24.95

Bar end mounted mirrors move the mirrors out past your elbows so you can actually see what is behind you. They can mount with or without hand guards.

$49.95

Keep your cables lubed up and working freely, with Motion Pro's Cable Luber. This tool is used to inject lubricant into any cable housing. Clamps over housing and cable allowing an aerosol can with nozzle to be connected. Once the lubrication solution runs out the far end, the cable is lubricated.

Add Cable Lubricant
$10.95

Designed to seal completely around the cable housing and stop all those messy leaks. With the unit closed and sealed around the cable, your cable gets better lubrication and you waste less lubricant.

  • Works on most cables with a 4mm - 8mm O.D. housing.
Add Cable Lubricant
$23.95

Electrical

This is an adhesive-backed foam kit, for the installation of small batteries into larger battery tray areas. Keep in mind that all Antigravity Small Case Batteries DO come with adhesive-backed foam in the box. This kit is for when you need extra foam or are doing installation in another vehicle.

Features

  • Hi Density adhesive backed foam
  • Help reduce vibration
  • Easily cuts with scissors or razor knife
  • 3 pieces of 6″ x 3″ x 0.5″ adhesive-backed foam
$9.95

Optimate 1 Global Charger-Maintainer

This charger is perfect for 24 hour, 7 days a week, 365 days a year smart battery maintenance. It delivers precise microprocessor controlled charging and long term maintenance. Maintain any type of 12 volt lead-acid (STD, AGM, GEL) and 12.8V/13.2V Lithium (LFP) batteries without overcharging. Ideal for vehicles that are seldom or seasonally used, or kept in storage. Global Three-step charging program ensures effective charging of the battery and is safe for prolonged connection to the battery, without risk of overcharging. Automatic shut-down if short-circuited or if battery is disconnected. Dust proof case with wall mounts and 6ft AC supply lead and 6 ft charge lead ending in SAE connector. Weatherproof battery lead & OptiMate battery clip set included.

$46.95

The Battery Tender Junior Selectable is a trickle charger with a brain. It will keep your Lead Acid, AGM or Lithium battery fully charged so that it is ready to go when you are. It's fully automatic, compact, and lightweight.

This smart charger has battery chemistry selection and will automatically sense and select the battery type, then complete a 4-step charging program, (Initialization, Bulk Charge, Absorption Mode, Float Mode) with a max output of 800mA. It will automatically switch to float/maintenance voltage after fully charging the battery. If the battery voltage drops too low, full charging output resumes. It also has a two color LED that indicates state of charge.

Reverse hookup is mitigated with reverse polarity protection.

Includes a 12 foot output cord, a 5 year warranty and the fact that it meets CA and OR appliance energy efficiency standards for battery charging systems make this a great little unit.

$46.95