CRF250L

Chain Size:        Front Sprocket:        Rear Sprocket:        Front Tire:        Rear Tire:        Spark Plug:
520x120 14T 40T 3.00-21 120/80-18 SIMR8A9

 

Featured Products

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

EFI Programmer, EJK

CRF250L '13 - '16
Choose Bike Model
$224.95

The EJK evolved out of the need to address the ever-increasing complexity of factory fuel injection. For the newcomer to the market or professionals wanting an easier method for tuning fuel injection, the EJK is a customizable solution for the rider that wants to take control of their tuning needs.

This unit is a piggy-back EFI controller because it does not replace the stock ECU, but rather monitors the signals to the injectors and makes fuel adjustments based on the mode settings. The GEN 3 has a push button interface allowing access up to 6 different modes to allow for quick fine tuning by the end user without needing a computer.

Key Features:

  • No computer or dyno needed!
  • Plug and play, simple to install, base settings preset
  • Unique load based technology
  • Full range tunability available
  • Does NOT interfere with stock ECU operation
  • Simple push button adjustment interface
  • Water-resistant 
  • 2-Year warranty
  • Compact size - 2.2" H x 3.4" W x 0.5" D
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in Australia

Skid Plate, B&B Off Road Engineering Bash Plate

CRF250L '13 - '21
Choose Color
$185.95

B&B Engineering Bash Plate for the CRF250L is made from 5083 4mm aluminum plate. Chosen because of its suitability for welding and extreme abrasion and impact resistance, this plate will protect the valuable center cases and deflect items away from the side cases as well. This plate is supplied with the necessary stainless clamps and bolts where necessary as well as foam or rubber where required.

Engine

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Radiator Cap, High Pressure

CRF250L '13 - '21
$19.95

Higher pressure in the cooling system, raises the coolant boiling point and increases protection from coolant loss due to overheating.

23 PSI - 1.6 Bar.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Radiator Hose Kit, Silicone

CRF250L '13 - '21
$147.95

Manufactured by Samco Sport UK - the world leader in silicone hose, with over 20 years experience

  • Smooth flow and improved insulation promotes radiator efficiency and improves engine cooling
  • Used by leading MX/Enduro and Off-road teams
  • Kit contains hoses and necessary clamps
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Air Injection Block Off Plate, Driven Billet

CRF250L '13 - '21
$46.95

Driven engine block off plates will stop the annoying and possibly damaging backfires from occurring while allowing you to remove a few pounds in associated valves and hoses from your bike. On late model EFI bikes with 02 sensors, ESPECIALLY when using Dynojet's Power Commander V with the Autotune feature, the air injection system MUST be blocked as it will introduce additional oxygen into the system which will skew your 02 sensor's values and make it impossible to get a correct tune.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Clutch Kit

CRF250L '13 - '16
$75.95

Our kit includes 5 EBC friction plates which eliminates the judder spring assembly by replacing it with a 5th friction plate.

Heavy duty clutch springs by Barnett are included it this kit which will significantly decrease wear under high stress conditions.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Clutch Kit, OEM

CRF250L '13 - '16
$105.95

Includes genuine Honda friction plates, drive plates, and clutch springs.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Clutch Springs, Heavy Duty Barnett

CRF250L '13 - '16
Choose Option
$18.95

Barnett clutch springs are made from the finest materials available.

Heavy Duty Barnett clutch springs are pre-set, shot-peened, and heat treated for performance and durability.
 

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Gasket Set, Top End

CRF250L '13 - '21
$83.95

Includes all necessary top quality gaskets for top end rebuilds.

  • Meet or exceed OEM specifications
  • Highest quality materials
  • Rubber coated spring steel head gasket, and soft steel base gasket
  • Includes valve cover gasket
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Oil Filter Cover, Billet

CRF250L '13 - '21
$58.95
  • CNC machined aluminum oil filter covers
  • Made of A7009-T6 aluminum with a beautiful anodized finish
  • Lighter than stock oil filter covers
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Oil Filter Magnet

CRF250L '09 - '21
$5.95
  • Reduce wear, and significantly increase your engine life.
  • Easy to install. Place on outer side of filter.
  • Powerful magnet traps abrasive metal particles down to 1 micron. OEM oil filters only filter particles down to 90 microns, leaving behind the most harmful particles to circulate through your engine.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Oil Filter, Value 10-Pack Hi-Flo

CRF250L '13 - '16
$33.95

Providing unbeatable performance and exceptional value, Hi-Flo is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide.

 

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Drain Plug Washers, 12mm

CRF250L '13 - '16
$6.95

A 10-pack of drain plug sealing crush washers. Replace your sealing washer at every oil change to prevent a leak.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Drain Plug, Magnetic

CRF250L '13 - '21
$13.95

Extra protection for your motor! Strong magnet at the end of the plug picks up metallic flakes in your oil, protecting your engine!

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Magnetic Drain Plug, PSR

CRF250L '13 - '21
$19.95
  • Bolts are CNC-machined from high-quality aluminum
  • Embedded magnet helps keep bolt in place
  • Pre-drilled holes make for easy installation of safety wires
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Spark Plug, Iridium NGK

CRF250L '13 - '21
Add Lubricant
$16.95

Iridium spark plugs are made with premium quality materials.

Iridium plugs last longer than standard ones, meaning you won't have to replace them as often.

  • The ultimate in the evolution of spark plug technology and performance from an industry leader
  • The iridium electrode is 25% smaller than a platinum electrode, and it's just 1/4 the size of a conventional nickel electrode
  • Ultra-small diameter center electrode reduces voltage requirement and extends ignition system life
  • Metal shell plating has enhanced anti corrosion qualities

Sold individually, unless otherwise stated.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Service & Repair Manual, Factory Honda

CRF250L '13 - '16
Choose Manual
$59.95

Genuine Honda Factory Service Manual specifically for your CRF250L

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Camshaft Installation Tool Kit

$199.95

Includes degree wheel, dial-gauge, multi-position stand, extension, 3-sizes of positive-piston stops, and a handsome wooden carrying case.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Clutch Holding Tool

$28.95

Made from medium carbon steel with hardened jaws. It features spanner pins and the jaws open up to 5" wide. It's ideal for holding clutch hubs, flywheels, gears, sprockets, etc. Made by Motion Pro.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Crank Case Separator Tool Set

$79.95

This tool is designed to separate vertically split crank case halves on two and four stroke engines. Adjustable arms allow it to be used on multiple bolt patterns found on a variety of makes and models of motorcycles. Industrial grade steel construction with black oxide finish for long service life. Comes with 8mm mounting bolts and 6mm adapters. Protective carrying case included.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Oil Filter Removal Tool, Motion Pro

$9.95

For easy removal of recessed oil filters.

Conical point screws pierces and grabs the metal end cap of the filter.

reduces potential damage to the engine cases.

NOT for use on re-usable oil filters.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Temperature Stickers

$14.95

A 3-pack of easy to apply strips measure the temperature of engine, suspension, and radiator components. Temperature range 146° to 248°

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Thread Chasers

$4.95

Thread Chasers are designed to clean and re-cut damaged aluminum threads.

this kit contains the two sizes most common on metric motorcycles, M6x1.0 and M8x1.25.

Thread Chasers also remove dirt and metal shavings that become captured in thread grooves.

Uses 8mm or 10mm hex sockets, a Must for all tool kits.

Fuel and Intake

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

EFI Programmer, EJK

CRF250L '13 - '16
Choose Bike Model
$224.95

The EJK evolved out of the need to address the ever-increasing complexity of factory fuel injection. For the newcomer to the market or professionals wanting an easier method for tuning fuel injection, the EJK is a customizable solution for the rider that wants to take control of their tuning needs.

This unit is a piggy-back EFI controller because it does not replace the stock ECU, but rather monitors the signals to the injectors and makes fuel adjustments based on the mode settings. The GEN 3 has a push button interface allowing access up to 6 different modes to allow for quick fine tuning by the end user without needing a computer.

Key Features:

  • No computer or dyno needed!
  • Plug and play, simple to install, base settings preset
  • Unique load based technology
  • Full range tunability available
  • Does NOT interfere with stock ECU operation
  • Simple push button adjustment interface
  • Water-resistant 
  • 2-Year warranty
  • Compact size - 2.2" H x 3.4" W x 0.5" D

EFI Programmer, JD Jetting

CRF250L '13 - '21
$239.95

Dyno and field tested, the Power Surge 6X will allow correction for humidity, temperature, air pressure, along with race fuels and motor modifications. The tuner adjusts in a matter of seconds in 6 zones, including an accelerator pump feature for more throttle snap response. The tuner can add or subtract fuel from the injection system. Conditions like rich or lean running, and stalling from flame-out at low revs can be corrected.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Air Injection Block Off Plate, Driven Billet

CRF250L '13 - '21
$46.95

Driven engine block off plates will stop the annoying and possibly damaging backfires from occurring while allowing you to remove a few pounds in associated valves and hoses from your bike. On late model EFI bikes with 02 sensors, ESPECIALLY when using Dynojet's Power Commander V with the Autotune feature, the air injection system MUST be blocked as it will introduce additional oxygen into the system which will skew your 02 sensor's values and make it impossible to get a correct tune.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Air Filter, K&N

CRF250L '12 - '21
Add Air Filter Care Kit
$73.95
  • Increased air flow over the stock air filter
  • Designed to increase horsepower and throttle response
  • Easily fits inside the factory air box
  • Four layers of premium cotton gauze provides outstanding filtration
  • Washable & re-usable, never wears out
  • One filter will last the lifetime of your bike
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Air-Box Filtered Vents

$13.95

Sold in 6 packs

  • Compatible with many air filter boxes.
  • More air flow allows you to add more fuel to your intake mixture, increasing performance.
  • 1" Diameter
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Carburetor Overflow Canister

$39.95

This canister by Pro Circuit allows you to move the overflow tubes from the carburetor up and out of the way. Universal application.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Clamps, Nylon Ratchet Style

$8.95

Quick release one-piece clamps that saves space. These are great for fuel lines, controlling wires, and can be used many times.

Comes with 4 each of 8mm, 9mm 10mm, and 12mm.

No special tools needed, from Helix Racing.

Gas Tanks

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Gas Tank, Acerbis 3.1 Gallon

CRF250L '13 - '16
Choose Color
$249.95

Acerbis fuel tanks were designed to provide additional fuel capacity without sacrificing ergonomics, and are the perfect choice for the rider trying to increase the range of their machine. Constructed of impact and abrasion resistant Polyurethane, Acerbis fuel tanks are durable, stylish, and will provide years of service.

* Will not fit 2017 Model

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Gas Tank, IMS 3.1 Gallon

CRF250L '13 - '21
Choose Color
$324.95

Designed to enhance the appearance of your motorcycle, yet provide greater riding distance per tankful. Larger capacity than stock, yet very slim and sleek

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Auxiliary Natural Tank LED Light Kit

$29.95

Become more visible and look cool while doing it. The ProCycle Natural Tank LED Light Kit will add more light to your bike with the push of a button.

Kit includes a handle bar mounted lighted switch, two 12" LED light strips with adhesive backing, four saddle splice connectors, and a center harness for connecting to your bikes harness.

Installation is quick and easy.

*Please note All colors other than amber and white are recommended for off road use only*

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Gas Cap Tank Vent

$11.95

If you're like us, you hate the long floppy vent hose hanging off the cap of your aftermarket tank. This one-way vent cap replaces the long hose with a short one only about 2" long. It allows air into your tank but prevents fuel from sloshing out. Machined from billet alloy and anodized for good looks.

Thumbnail

  Not for stock fuel tanks!

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Gas Cap w/Vent, Acerbis Faux Carbon Fiber

CRF250L '13 - '21
$24.95

If you need a replacement cap for your Acerbis tank, why not go bling? These caps have a carbon fiber pattern molded into them that is extremely realistic. Looks like the real thing. Topping off the cap is a CNC Machined metal vent cap. This eliminates the need for a lengthy vent tube that gets in the way. The vent cap allows air to vent into the tank but does not allow fuel to splash out during normal use or during a tip over.

Thumbnail

These caps fit Acerbis tanks only.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Gas Cap, IMS Replacement

CRF250L '13 - '21
$15.95

A replacement gas cap for your IMS tank. Newly redesigned to resist damage from new fuel additives that were hard on the seal in the old style cap.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Filter, 1/4" - 90° or Straight

Choose Type
$24.95

The small size and right angle hose barbs make this filter easier to fit into the small space between your fuel petcock and carburetor. Filter body is only 7/8" diameter. Straight filter is 2" long, 90 degree filter is only 1-5/8" long.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Filter, 5/16"

Choose Pack
$17.95

This filter is meant for 5/16" fuel lines. Only 1/2" thick it is small enough to fit just about anywhere.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Filter, Gas Tank

Choose Tank Type
$34.95

Fuel supplies can be sketchy at times. This filter lives in your tank to trap dirt and debris as it is poured into the tank. Features a custom shaped adapter that fits securely under the gas cap, creating a leak-proof seal. If it stays out of your fuel, it can't get into the carburetor! Created by the filter experts at Twin Air, this filter fits IMS,  Acerbis and Safari brand gas tanks.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Line Clamp Kit

$5.95

Ordering new fuel line? How about a set of fresh zinc plated clamps to go with it?

These will be sure your fuel line stays connected. A pack of 8 clamps in 2 sizes to fit most 1/4 or 5/16 fuel hose.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Fuel Line Reducer, 5/16" to 1/4"

$7.95

Hose reducer to go from 5/16" line down to 1/4" line. Many bikes have 5/16" carburetor spigots but most aftermarket petcocks are 1/4". This solve the problem of mismatched sizes. Solid brass construction. Can be used to route or repair fuel lines, oil lines or air lines. Barbed ends provide a secure fit.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Line, Premium

Choose Type
$8.95

30" lengths. Sizes shown are ID. All of these lines are stronger and more durable than vinyl fuel lines and are resistant to swelling, UV light, as well as hardening and cracking.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Auxiliary Container Mount Extension, RotoPax

$34.95

Need to mount two containers? A water and a fuel? Two waters? Already have a RotoPax Mount for a single container? Get this extender to work in conjunction with a pack mount and that will be no problem! Single mount, two containers.

 

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Auxiliary Container Mount, RotoPax

Add Extension Mount
$35.95

RotoPax holder made to mount a single Fuel and/or Water container.

Need to mount two containers? A water and a fuel? Two waters? Get the extender which allows you to stack two containers no problem! Single mount, two containers

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Auxiliary Container, RotoPax 1 Gallon

Choose Container
Add Container Mount
Add Extension Mount
$64.95

RotoPax are Rotational Molded - the process which produces indisputably superior products.

  • Thicker walls and stronger construction
  • Bright colors that are less prone to fading
  • Extra threads, thicker walls, and sure-seal gasket guarantee no leaks

Need to mount two containers? A water and a fuel? Two waters? Finally, you can stack multiple packs together! Use in conjunction with a pack mount. You will need to purchase the Single Mount as well as the Extender.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Auxiliary Fuel Pack, Open Trail 1.5 Gal

Add Container Mount
Add Fuel Stabilizer
$59.95

Quality Fuel pack that's slightly larger than RotoPax 1 gal.

  • New seven layer blow molded technology
  • EPA and CARB approved
  • Sleek, low profile design
  • Versatile mounting capability

Note: Mount listed is a RotoPax mount that will fit the Open Trail Fuel Packs.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Auxiliary Gas Bag, Fuel Safe Bladder, Giant Loop

$234.95

Giant Loop's Gas Bag Fuel Safe Bladder conveniently transports 1 gallon of hydrocarbon fuel for power sports use in a collapsible welded film and ballistic nylon reinforced container that rolls up or packs flat when empty, weighing less than 1 pound.

The Gas Bag Fuel Safe Bladder Kit includes 2 pairs of Giant Loop's adventure proof 26" Pronghorn Straps plus a 3-Pack of Fast Funnel Disposable Fuel Funnels.

Each Gas Bag Fuel Safe Bladder is individually pressure tested and made in USA by Fuel Safe, a leading fuel containment manufacturer based in Oregon.

  • Volume: 1 gallon maximum capacity (3.8 liters).
  • Empty weight: 11.5 oz.
  • Dimensions (flat and unfilled): 19.5" long x 9.5" wide. Rolled diameter (empty): approximately 4".
  • Filler neck is standard size, fitting "universal" spouts.
  • Materials & Construction: Welded film bladder sewn into ballistic nylon sleeve with webbing daisy chain anchor points and handles.

 

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Auxiliary Gas Tank, Acerbis

Add Fuel Stabilizer
$112.95

Auxiliary fuel tanks mount to handlebars, forks, or rear racks.

  • Suitable for minis, trials bikes, full size bikes, and anywhere else a little extra fuel is needed.
  • Each tank includes a siphon kit that connects the tank to the main fuel tank and automatically siphons fuel while the bike is being ridden.
  • With this design, the auxiliary tank empties first, before the main tank.
  • Does not interfere with headlight, handguards, rear seat, etc.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Super Siphon

$19.95

This Super Siphon has  a (1/2 inch x 6 foot) long hose, which makes it quite easy to transfer fuel from one bike to another! Simply, shake the hose to prime it and get fuel moving.  The hose is resistant to gasoline and any other hazardous chemicals. Roll it up, stuff it in your bag and you will be very happy whenever you need it.

Body

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Windscreen, Bajaworx Rally

CRF250L '13 - '21
Choose Tint
$109.95

Molded using a very durable, lightweight 1/8" thick polycarbonate - giving the windshield a high impact strength and making it shatter-resistant with a superior light transmission quality. Mounts quickly and easily onto the stock headlight cowling for a clean factory look. Drilling of the cowling is required, hardware is included. Removal for trail riding is also quick and easy.

Thumbnail

 LIMITED STOCK ON TINTED UNTIL SPRING OF 2021.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Windscreen, Dual Sport

Choose Color
$129.95

Windscreen attaches to your bike's handlebars. Fully adjustable mounting brackets. Includes 7/8' handlebar clamps.  14" tall & 10" wide.

Thumbnail

  Will not fit 1 1/8" oversize handlebars.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Windscreen, Laminar Speed Shield

CRF250L '13 - '21
Choose Color
$99.95

Laminar Speed Shields are designed to provide lower wind pressure in the chest area to help reduce rider fatigue. Short enough to not be in the way when standing up on the pegs. Mounts directly to the stock headlight cowling with all hardware provided and no drilling required!

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Windscreen, Visor Clip-On Puig

$119.95

Puig Visor Clip-On

  • Suitable for screens with thickness between 3-5mm
  • Multi-adjustable visor adaptable to Puig and OEM windscreens
  • Visor is mounted by clip-ons and does not need to be drilled to the windscreen
  • Visor sizes available include 90x230mm, 100x277mm and 102x325mm
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Front Fender, Supermoto

$28.95

Universal design.  Vents in the back improve airflow to motor.  Smaller front reduces 'wind steer' and improves high speed stability.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in United Kingdom

Mini Fairing Screen, Adventure-Spec

$36.00

Replacement screen for Adventure-Spec Mini Fairing.

This is for screen only, please see Mini Fairing Support for complete assembly.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in United Kingdom

Mini Fairing Support, Adventure-Spec

Choose Bar Size
$99.95

A universal mini-fairing (for 22mm (7/8") and 28mm (1 1/8") Bars) designed to help you mount anything you choose on an industry standard 30mm x 38mm AMPS 4 hole pattern (perfect for a RAM ball or powered Garmin Montana Rugged Mount). In addition the fairing comes with two holes for mounting a standard cigarette lighter / USB style socket and a 12v rocker switch.

This is for the support mount only, COLOR SCREEN SOLD SEPARATE.  Please choose color screen in drop down menu to complete the assembly.

Not for CRF450L (see model specific listing)

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA ProCycle Approved

License Plate Frame, LED

$29.95

This frame includes six, white, full-spectrum LED bulbs on a 6-inch strip for bright illumination of your license plate. It is made in a sturdy cast aluminum, and is powder coated with a durable black finish.

Outside frame dimensions are 7.25" in. wide by 4.2". Center to center mounting hole distance is 5.7 in. All mounting hardware is included.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Bling Kit, Complete Billet

CRF250L '13 - '21
$112.95
  • F/R Brake reservoir covers
  • Brake line clamp
  • Oil filler and timing inspection plugs
  • Axle blocks and air valve caps
  • Rim lock nuts and spacers
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Heat Shield, Side Panel

$14.95

Adhesive heat shield for your new side panel plastics to protect it from the heat of your muffler.

Seats

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Dual-Sport Riding Comfort, Corbin Seat

CRF250L '13 - '17
Top Texture
Side Texture
$422.95

Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.

Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.

The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides.

Thumbnail

 Corbin seats are built to order. Lead time on building a seat is 2-3 weeks.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Foam and Cover Kit, Seat Concepts Comfort

CRF250L '13 - '21
$179.95

Seat Concepts dual-sport / adventure seat-kits incorporate a wider seating area for the rider, which results in a more even weight distribution, while reducing pressure points. Each individual seat model was specially designed to increase comfort without compromising ride ability.

Tall seat is 1" taller than stock.  Low seat is 1" shorter than stock.  Default foam density is 160-250lbs. Softer or firmer foam available on request for no extra fee.

Thumbnail

 Please allow 1-2 weeks for delivery

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Seat Cover, Sheepskin

$69.95

This is the secret for being able to put in those 500 mile days. Even a good touring seat can feel a bit firm after a couple hundred miles. Sheepskin gives that little bit of 'cush' and provides superior air circulation. Velcro straps allow easy removal when you don't need it. Measures 14" wide by 19" long.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Seat Cushion, AirHawk

$112.95
  • Air filled AirHawk 12"x18" cushion custom fits your shape and redistributes pressure that causes numbness and discomfort when you ride
  • Seat cushion cover is constructed of a breathable, stretchable Nylon/Lycra blend with a non skid Urethane base
  • Open mesh side panels allow heat to escape
  • Easily inflates by mouth with no pump needed
  • Mounting straps and Repair patch kit included
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Seat Warmer Kit

$79.95

9" by 9" carbon fiber seat warmer that goes between your seat cover and the foam to keep your backside happy on those really cold days. This improved design produces 25% more heat than most other warmers using just 30 watts.

Kit includes the warming unit, with connector, 24" extension cable, rocker-type on/off switch and stub to splice into your wiring along with complete detailed instructions.

Armor - Bike Protection

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Skid Plate

CRF250L '13 - '21
$99.95
  • Made from 4mm thick aircraft aluminum
  • Oil drain hole for easy access
  • All mounting hardware included
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in United Kingdom

Skid Plate, Adventure-Spec Bashplate

CRF250L '12 - '21
$154.95

A 4mm aircraft grade aluminium tig welded bashplate with a hard anodized coating.

Made in the UK exclusively for Adventure Spec this protection is superb quality and covers all vital components properly.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in Australia

Skid Plate, B&B Off Road Engineering Bash Plate

CRF250L '13 - '21
Choose Color
$185.95

B&B Engineering Bash Plate for the CRF250L is made from 5083 4mm aluminum plate. Chosen because of its suitability for welding and extreme abrasion and impact resistance, this plate will protect the valuable center cases and deflect items away from the side cases as well. This plate is supplied with the necessary stainless clamps and bolts where necessary as well as foam or rubber where required.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Skid Plate, R&G Racing Bash Plate & Case Guards

CRF250L '13 - '21
Choose Option
$114.95

Constructed of durable 3mm powder coated aluminum and easily installed utilizing existing mounts, the R&G Bash Plate (center plate) will protect the underside of your motorcycle from damage and debris. Add Case Guards (left and right plates) to your order for complete protection.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Case Cover Engine Protection Kit, R&G Racing

CRF250L '13 - '21
$170.95

Developed on the track and brought to the road. R&G engine case covers are made from 4mm polypropylene for strength, durability and looks that compliment your bike. Both sides included.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in United Kingdom

Case Covers, Adventure-Spec

CRF250L '12 - '21
Add High-Temp Silicone
$65.95

Pressed and anodized 2mm aluminum case protectors for your Honda CRF250L's engine cases. Fitted with high temperature silicon adhesive they absorb shock from piercing impacts. Essential equipment.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Frame Sliders, R&G Racing

CRF250L '13 - '21
Choose Option
$115.95

Constructed of heavy-duty machined steel, aluminum, and high-density nylon, R&G frame sliders provide maximum protection and high quality fit and finish. R&G "Aero" sliders have an aerodynamic teardrop shape for a more streamlined look than traditional cylindrical slider pucks

R&G "Cotton" Reel Swingarm Spools are oversize paddock stand bobbins that perform double duty as lifting points for hook style paddock stands as well as protection for the swingarm of your motorcycle in the event of crash or drop.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in Australia

Radiator Guard, B&B Off Road Engineering

CRF250L '13 - '21
$149.95

These hand-built units out of Australia are one of the most advanced radiator protection systems available! CNC machined 6000 series three-dimensional aluminium extrusion melded with 5000 series alloy plate to create a system that protects your precious radiator from almost any direction.

Designed with a fin angle that allows almost nothing to come in contact with the vulnerable core that is otherwise directly exposed to roost, rocks and all sorts of trailside debris. The fins are designed in a fashion that they completely mimic the designed airflow characteristics of the OEM plastic protector fins.

The protective finned louver panel quickly and easily unbolts to make clean-up a snap. Three-piece modular construction allows for greater design flexibility which eliminates the compromises that are built into one-piece designs. If any single piece of this unit is ever damaged, it is replaceable by itself, no need to replace the entire guard. Just give us a call. Installation is a snap, taking no more than 30 minutes with basic tools.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Radiator Guard, Flatland Racing

CRF250L '13 - '21
$69.95

This is the ultimate radiator guard for the CRF250L. Protects your  radiator from both front and side impacts. A rear mounting bracket provides that extra support. Constructed from 1/8" aluminum, the kit includes all necessary mounting hardware for a very simple installation.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Brake Master Cylinder Guard, Rear

CRF250L '13 - '16
$44.95
  • Protect the exposed rear brake master cylinder from damage
  • Fabricated from mild steel and expanded metal
  • Powder coated flat black
  • Easy installation with all required hardware provided
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Front Countershaft Sprocket Cover

CRF250L '13 - '21
$49.95
  • CNC machined front sprocket cover
  • Designed to keep mud out of the front sprocket area
  • Made of A7009-T6 aluminum
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguard Kit, Barkbusters BBZ Fabric

$99.95

Extend your comfortable riding season with Barkbusters BBZ cold weather protection handguards. Designed to fit with or without existing Barkbusters backbones or handlebar weights, these guards offer superb wind protection without limiting access to your grips or controls. Simple to install, they can be mounted or removed within ten minutes without permanent modifications. Ride with less bulky gloves in colder weather with the Barkbusters BBZ cold weather protection handguards.

Features:

  • Fits most motorcycle handlebars
  • Maximum cold weather protection
  • Compatable with or without Barkbusters backbones
  • Lined with waterproof membrane
  • Windproof
  • Full wrap design
  • Allows full access of controls
  • Does not block view of handlebar thumb controls
  • Simple to install and remove

Whats in the box:

  • Two BBZ cold weather handguards
  • Mounting hardware
  • Instructions
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards Kit, Moose

Choose Handguard
$67.95

Contoured alloy hand guards with inner mounts, allow space for the clutch cable and brake hose.

Images show a set of these hand guards installed on a set of CR High Gunmetal Fly Handlebars with large black deflectors. The far right image shows the need to flip the brackets that attach to the bar on the clutch and front brake side. On the front brake side the clamp must go over the front brake line while on the clutch side it goes under the cable.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Acerbis X-Factor

$139.95

These handguards come with mounts that will work on both standard and and oversize bars. The aluminum wrap-around bar is the biggest on the market with two large plastic shields that are also some of the largest available. The X-Factor hand guards offer great protection from the elements, especially during those colder months when you're trying to stretch out your riding season.

Works with 7/8" or 1-1/8" bars.

Thumbnail

  X-Factor guards require you to cut your lever ends down, or use short levers.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Acerbis X-Factor Replacement Plastics

$22.95

Replacement handguards for your Acerbis set up. Tough Polypropylene shields with a larger 6" outer diameter, built for extreme riding conditions.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Barkbusters STORM Kit for 7/8" or 1 1/8" Tapered Bars

Choose Kit
Add Barkbuster Indicator Lights
Add Resistor Set
$119.95

Protect your hands and levers with the Barkbusters Storm lever and weather protection handguards. Full wrap solid heat treated aluminum bars with secure two point mounts on each side provide strength while attractive and generous guards provide shelter from the wind and weather. Ride longer with the Storm handguards and complete mounting kit by Barkbusters.

Features:

  • Two mounting points provide secure protection
  • Full wrap guards
  • Heat treated aluminum backbone bars
  • Easy installation
  • Tough and weather shielding Storm handguards
  • Aluminum backbones are compatible with all Barkbusters deflector guards

What's in the box:

  • Left and right aluminum backbone bars
  • Inner and outer handlebar mounting hardware for both sides
  • Left and right Storm plastic handguard deflectors
  • Installation instructions
Thumbnail

  Not recommended for Africa Twin, T7, Himalayan, or V-Strom.  Please see specific listings for those models.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Barkbusters VPS Kit for 7/8" or 1 1/8" Tapered Bars

Add Barkbuster Indicator Lights
Add Resistor Set
$116.95

Keep your hands and controls protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Heat treated aluminum backbones with two mounting points of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors, available in multiple colors, provide protection for your hands from the wind and brush. Ride longer, more comfortably with Barkbusters VPS lever and wind protection handguards

Features:

  • Two mounting points provide secure protection
  • Full wrap guards
  • Heat treated aluminum backbone bars
  • Includes VPS left and right plastic deflectors
  • Easy installation

What's in the box:

  • Left and right aluminum backbone bars
  • Inner and outer handlebar mounting hardware for both sides
  • Left and right VPS plastic deflectors
  • VPS deflector fastening hardware
  • Left and right adjustable position wind extension deflectors
  • Installation instructions
Thumbnail

 Not recommended for Africa Twin, T7, Himalayan, or V-Strom.  Please see specific listings for those models.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Barkbusters VPS Replacement Plastics

$36.95

Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Cycra ProBend

$129.95

Construction of these handguards feature heavy duty aluminum guards with colored plastic deflector shields. They offer great protection from those trees that jump out at you on the trail and the cold wind and rain you encounter on the street. They feature a deep bend on the outer bar end for maximum freedom of hand placement and high quality bar mounts on the inside.

Select your desired color with the corresponding size mounts to fit your handlebar.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Cycra ProBend Replacement Plastics

$21.95

Replacement handguards for your Cycra set up. Injection-molded high-impact plastic replacements. Includes all hardware needed for mounting.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Deflectors Moose

$24.95

Fits Moose and other aluminum hand guards

  • Aerodynamic and stylish design
  • Protect hands from brush, water and cold wind
  • Simple installation
  • Sold in pairs
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Handguards, Enduro ¾ Grip Mitt - OBR ADV Gear

$74.99

The OBR ADV Gear Enduro ¾ Grip Mitt is your answer to cold fingers! Our ¾ open design terminates right at the wrist, but still offers full coverage of the hand while blocking the swirling air flow that freezes finger tips. Their ¾ open design does not cover important controls such as Hi/Lo Beam, Turn Indicator, or Kill Switches making this Grip Mitt perfect for both Off Road, Enduro, ADV, and ATV applications with full wrap hand guards.

Features

  • High strength and water resistant 1680d Ballistic Nylon construction 
  • Universal easy on/off Velcro snap strap attachment system
  • Reflective Front Strip for High Visibility
  • ¾ Open design provides full coverage of the hand while not impeding controls
  • Works with OEM and Full Shield (Cycra/Trackside) style hand guards (Hand guard system required for attachment)
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Molded Foam Moose

$30.95

Extra protection in bad weather to help keep your hands warm and dry. These nearly double the protection from most plastic type deflectors.

The outer shell is made from heavy-duty 500-denier nylon with 1/2" closed cell foam to keep the wind, cold and rain off of your hands.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, PowerMadd Fuzion

Choose Type
$99.95

FUZION guard feature the ultimate in hand protection with a unique design and flexible yet durable material. The expanded coverage area sweeps back toward your hand significantly increasing coverage making it perfect for cold, muddy or wet conditions. The FUZION features a unique two position mount and is constructed of molded light-weight closed-cell AEPE foam, which is crush-proof, water proof and extremely durable. The FUZION will work great for road of offroad riding, where wind deflection is important, and or bouncing off trees is a common occurrence. Kit includes mounts. Optional replacement mounts available.

Controls

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebar, Oversize Kit With Risers

CRF250L '13 - '21
Choose Rise
$117.95

Black in color

Upgrade your bike with FLY Aero 1-1/8" bar. Constructed of Aircraft grade 7075 taper walled aluminum that tapers to a standard 7/8" to accept stock controls.

  • Bead blasted surface for added strength
  • Laser accurate steering
  • Dissipates shock and reduces rider fatigue
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebars, Aero Fly Racing

$79.95

Comfortable Oversize (or Fat Bar) Handlebars. For bikes with standard 7/8" handlebars these will require the use of a 7/8 to 1-1/8  adapter. Black in color. Raise your bars and get rid of the crossbar that obstructs your view of the speedo. Works with stock controls and cables.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebars, Fly Racing

$41.95

These handlebars are high quality at an affordable price. Several bikes here in the shop use these bars and we like them.

  • 7/8" mounting area, fits stock mounts
  • Manufactured from 6061 T-6 aircraft grade aluminum
  • Knurled center section and clutch end
  • Bar pad is included
  • Reduces rider fatigue by absorbing impact, shock and vibration
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebars, SE ATV High ProTaper

$69.95

These 7/8" bars fit in the stock clamps and raise your grips a couple inches. They look great too!

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebar Riser, 2" Powermadd

Choose Bar Size
$59.95
  • 4.75" wide,
  • Requires 7/8" bar clamps on bike
  • Raises handlebars 2 inches and allows fore/aft position adjustment
  • Provides dual pivot points for optimal bar positioning
  • One piece design is made from solid aluminum for superior strength
  • Available for 7/8" - 7/8" or 7/8" - 1 1/8" bars