Back to Top


ProCycle 385cc Big Bore Kit

DR350 all

Includes forged Wiseco 83mm Piston, Rings, Clips, Pin and top end gasket set.


Cam Bore Plug

DR350 all
dr650 cam plug

This is the little rubber plug on the right hand side of the cylinder head. Replace this plug to avoid having an oil leak after disassembling your top top end.


Hi-Flo Oil Filter Value 10-Pack

Providing unbeatable performance and exceptional value, Hiflofiltro is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.

You pay $3.40 per filter with our value 10-pack!


Oil Filter Magnet

Oil Filter Magnet
Oil Filter Magnet
  • Reduce wear, and significantly increase your engine life.
  • Easy to install. Place on outer side of filter.
  • Powerful magnet traps abrasive metal particles down to 1 micron. OEM oil filters only filter particles down to 90 microns, leaving behind the most harmful particles to circulate through your engine.


New! 120216

Valve Adjustment Wrench Set

  • Heat treated and chrome plated for durability
  • Include 10mm wrench with 3mm square adjuster
  • Fit motorcycles and ATVs with screw-type adjusters

    Included Items:
    (1) 10mm chrome steel socket wrench
    (1) 3mm square tappet adjuster


Valve Adjustment Tool

click to enlarge

Use this tool to turn the 'square top' tappet screws. It makes valve adjustments much easier.


Valve Adjustment Wrench

A 'wrench style' tool to turn the 'square top' tappet screws. The wrench does a little better job of holding the adjuster screw still while tightening the locknut. Slim and flat, this tool is much easier to carry in a tool pack.


ProCycle 440cc Big Bore Kit

DR350 all

Includes forged JE 89mm piston 10.5:1 piston, Rings, Clips, Pin, big bore sleeve and top end gasket set. You will have to have the big bore sleeve installed in your cylinder and bored to fit the larger piston.


EBC Clutch Kit

DR350 all
  • Complete set of friction plates, steel plates, and springs
  • Heavy-duty springs help prevent clutch slip
  • Restores proper stack height, fixes clutch slip caused by wear and tear


Magnetic Drain Plug

Extra protection for your motor! Strong magnet at the end of the plug picks up metallic flakes in your oil, protecting your engine!


Drain Plug Washers

A 10-pack of drain plug sealing washers. Replace your sealing washer at every oil change to prevent an oil leak.

Choose Color:


New! 010416

Timing Inspection Plugs

DR350 all

Billet plugs for your left side case. Includes both the timing mark plug and the crankshaft access plug.


Feeler Gauges

DR350 all

Two feeler gauges on a single tool. Angled to make checking the clearances easier. Stock valve clearances are .004" intake and .005" exhaust (.10mm int. and .13mm exh.)


New! 010518

Camshaft Install Kit

Camshaft Install Kit

Includes degree wheel, dial-gauge, multi-position stand, extension, 3-sizes of positive-piston stops, and a handsome wooden carrying case.


Clymer Repair Manual

DR350/DR350S 90-94
click to enlarge

Clymer manuals are the most user-friendly repair manuals. They are written for the do-it-yourselfer as well as the experienced mechanic by industry experts. Step-by-step instructions based on the complete disassembly of the machine. This manual in written to cover 90-94 models but most of the information will apply to newer models also.

Fuel Systems

Back to Top


K&N Air Filter

DR350/DR250 all
  • Increased air flow over the stock air filter
  • Designed to increase horsepower and throttle response
  • Designed to fit inside the factory air box
  • Larger surface area over foam filters which offers longer service intervals in dusty conditions
  • Four layers of premium cotton gauze provides outstanding filtration
  • Washable & re-usable, never wears out
  • One filter will last the lifetime of your bike


K&N Filter Care Kit

For K&N filters only

A six step maintenance system designed to recharge any K&N air filter

  • Completely restores airflow efficiency
  • Kit includes filter oil, and filter cleaner


DynoJet Kit

DR350S '90-'99

Designed for use with stock engines using either stock or aftermarket exhaust and air filters.

  • Provides a simple and affordable solution to carburetor tuning problems
  • Allows you to tune your bike for increased power and smoothness while retaining fuel economy
  • Includes a guide booklet on how to install and use your jet kit to it's full potential
Select Line Size/Color

Premium Fuel Line

Sold in 30" lengths

30" of new fuel line in the size and color you desire. Sizes shown are ID. All of these lines are stronger and more durable than vinyl fuel lines and are resistant to swelling, direct sunlight, hardening and cracking.

Click here for a fuel filter for your 5/16" line or click here for filters for your 1/4" line.

You can also click here to order a set of 8 fuel line clamps to secure your line to your inlets and filters. Sized to fit your particular line.


Fuel Line Clamps

Ordering new fuel line? How about a set of zinc plated clamps to go with that new line. These will be sure your fuel line stays connected. A pack of 8 clamps in 2 sizes to fit most 1/4 or 5/16 fuel hose.


5/16" to 1/4" Fuel Line Reducer

(Made in USA)
5/16" to 1/4" Fuel Line Reducer

Hose reducer to go from 5/16" line down to 1/4" line. Could be used to go up from same sizes should you need to also. Solid brass construction. Can be used to route or repair fuel lines, oil lines or air lines. Barbed ends provides a secure fit.


Pingel Fuel Petcock

(Made in USA)
pingel petcock fuel valve

A popular upgrade from the stock vacuum operated fuel valve. Manually operated. Must be shut off any time the bike is parked for more than a few hours. Fits stock tank or aftermarket tank an d has both main and reserve. Fully rebuildable.

Choose Type:


'Raptor' Petcock


The famous 'Raptor' fuel valve. Replace your stock vacuum operated petcock with this manual one. Must be shut off any time the bike is parked for more than a few hours. Fits stock or aftermarket tanks. Plastic tanks may need the hole 'ovalized' to fit the dual standpipes.


Twin-Air Filter

DR350/DR250 all

Twin Air Filter's patented design, high quality materials and superior construction deliver unbeatable performance and protection - and make Twin Air Filters the hands-down choice of more World and National Champions than all other filters combined.
An air filter is your engine's only protection against the elements, and your stock filter isn't up to the task. Replace it with a Twin Air- the #1 filter system proven on motocross tracks around the world.
Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles-without restricting airflow!

Evolution Air Filter Oil

This advanced filter oil kit by No Toil is alcohol free, completely biodegradable and compatible with all foam filters.

  • Offers superior protection
  • Waterproof yet easy to clean


Extended Fuel Screw

DR350 '90-'99

The extended fuel mixture screw makes it much easier to fine tune the idle mixture. This screw is made specifically for the stock OEM Suzuki carburetor. It's a nice addition to installing a jet kit or any other performance mods.

Choose Quantity:

5/16" Fuel Filter

This filter is meant for 5/16" fuel lines. Only 1/2" thick once the fuel lines are in place, it is small enough to fit just about anywhere.

Need some clamps to secure your line and filter? Click here for the proper sized clamps.

90 Degree Bend


1/4" Fuel Filters - 90 Degree or Straight

The small size and right angle hose barbs make it easier to fit into the small space between your fuel petcock and carburetor. Filter body is only 7/8" diameter. Straight filter is 2" long, 90 degree filter is only 1-5/8" long.

Need some clamps to secure your line and filter? Click here for the proper sized clamps.


Fuel Tank Vent Cap

If you're like us, you hate the long floppy vent hose hanging off the cap of your aftermarket tank. This one-way vent cap replaces the long hose with a short one only about 2" long. It allows air into your tank but prevents fuel from sloshing out. Machined from billet alloy and anodized for good looks.
Not for stock Dual Sport fuel tanks


New! 010518

Mikuni Pocket Tuner

Mikuni Pocket Tuner

A handy pocket size slide calculator from Mikuni to help you calculate jetting changes due to temperature and elevation changes. Will work for single and multiple cylinder machines whether 2 or 4 stroke. Also includes a guide for determining rich or lean conditions.


Back to Top



JNS Heavy-Duty Chain Guide

(Made in USA)
JNS Heavy-Duty Chain Guide

A real Heavy-Duty Chain Guide. Manufactured from 5mm thick (0.19") 5052 Aluminum, this guide will take a pounding and continue to put that chain right on the sprocket. The rub block is machined from UHMW plastic and can be positioned to fit just about any sprocket available for the DR.


Cush Drive Rubber Dampers

All with cush drive

The DR350 is rather hard on the cush drive rubbers. Replace these any time you feel excessive play in the sprocket hub. Excessively worn dampers can cause the cush hub bearing to fail - which will ruin your sprocket carrier. Sold as a set of 6 rubber dampers.

Choose Package:

Scottoiler Auto Chain Oiling System

This is a vacuum operated automatic chain oiling system to keep your driveline adequately lubricated at all times.

When properly adjusted the oil will last thousands of miles between refills. The Scottoiler kit includes one 250ml bottler of oil which is good for 10000 miles of riding.


Motul Chain Paste

A new innovative product from Motul. This chain lube comes in a brush applicator squeeze-tube bottle. It makes applying chain lube easy and less messy than spray on lubes.


Renthal Chain Lube

Renthal chain lube is 100% lubricant, zero propellant. So this new 250ml bottle size combines high performance and value.

The all-new formula Chain Lube is specially designed to penetrate all parts of the chain. This all-condition lube is compatible with all o-ring and non o-ring chains.

Front Sprocket:

Rear Sprocket:


Chain & Sprockets

Due to the difference in stock gearing between various models and years, you MUST SELECT the proper gearing for your machine! If you do not select a countershaft and rear sprocket, it will not show individual sprockets in the shopping cart upon checkout and we will not know what to ship to you.

All sprockets are quality steel units from industry leading JT Sprockets. Also included is a 120 link EK 520 SR06 O-ring chain with a clip type master link.


Sprocket bolts

A set of six high quality grade 10 sprocket bolts with locknuts. Threadlock compound has already been applied for extra security.


Master Link Pliers

Master Link Pliers

Make your life a little easier by having a set of these in your toolbox. Designed to simplify installation and removal of clip-type master links. One tip is shorter and notched to be placed on the pin which allows the longer end to push the clip.


The Grunge Brush

Innovative design that cleans chain from 3 angles at once. Long handle keeps fingers and hands away from chain and sprockets.

  • Will not harm O-ring chains
  • Easily adjustable for all chain sizes


360° Chain Brush

This brush has 2.25 coils of 360° chemical-resistant nylon bristles to make it the fastest, most effective, precise and systematic method for giving your chain a thorough cleaning. It will help the performance of the chain, the sprockets and the engine. This brush will fit any 400 or 500 series chains.


Back to Top


Kouba 2" lowering links

Lowers the rear suspension 2 inches. Precision machined from billet aluminum and gold anodized.

Choose Spring Rate:


Straight Rate Fork Springs

  • Stiffer than the stock springs for better handling and shock absorption
  • Ultra lightweight for reduced weight
  • Sold in pairs


Fork Seal Skins

Sold in pairs

Helps protect vulnerable fork tube and seal from dust, dirt, and corrosive elements. Hook & loop (velcro) fastening on back side makes installation or removal for cleaning a breeze.


Linkage Bearing Kit

DR350 & DR250 all
click to enlarge

Complete kit to replace the bearings and seals in the DR350 shock linkage. Includes the lower shock bearing.


Swingarm Bearing Kit

DR350 & DR250 all

Complete Moose Racing (All Balls) kit to replace the bearings and seals in the DR350 swingarm pivot.


New! 032618

Linkage Bearing Grease Tool

DRC Link Lube Injector

Makes installation of your linkage bearings much easier. Also simplifies maintenance of those bearings.

  • Linkage bearing grease tool
  • Allows placing bearing needles on bearing race while greasing linkage bearings
  • Will thoroughly apply adequate grease on your suspension linkage bearings


Fork Boots

Sold in pairs

An excellent replacement for the stock fork boots. These are great for protection from dirt, rocks and other contaminants. These boots utilize the latest advances in material technology to adapt to fork and styling demands. These high quality fork boots are 1/4 the price of the OEM factory replacements.

Choose black, red, blue, or yellow.


fork boot black fork boot red fork boot royal blue fork boot yellow


Back to Top


FMF Powercore 4 Slip-on Muffler

  • Increase the horsepower and torque of your bike throughout the entire power curve and give you a noticeable power increase that is very usable and beneficial, no matter what your riding style or ability is
  • Provides higher flow for increased power delivery
  • Uses long-life muffler packing for increased packing life
  • Forest Service approved spark arrester


Quiet Insert for Q4 and PowerCore 4

This Quiet Insert comes stock in all new FMF Q4 mufflers. If you lost yours, this is the replacement you need. It will fit Q4, Q4 Hex, PowerCore and PowerCore Hex. For those of you with the PowerCore models, it will reduce the sound level from about 99db down to about 96db.

Quiet Insert


Stainless Steel Heat Shield

Stainless Steel Heat Shield

This universal heat shield provides great looks at a great price.

  • Fits all 1-1/2" - 2-1/8" Pipes
  • Measures 7-1/4" x 3"


Pipe Armor

Pipe Armor Pipe Armor

Protect your head pipe from rock damage. This stainless steel spine clamps to your head pipe to add a layer of protective armor between your vulnerable pipe and those nasty rocks or logs. Fits the stock headpipe. Will fit the FMF head pipe with the addition of larger clamps.

Choose Color:

Cycle Performance Exhaust Wrap

(Made in USA)
Cycle Performance Exhaust Wrap

Set your bike apart with a custom exhaust look.. Withstands direct heat up to 2000°F

  • 2"x25' wrap available in black or natural
  • 4ea stainless steel tie wraps


DG Performance V2 Slip-on

(Made in USA)

The V2 Series Slip-On muffler features an aluminum body, TIG welded components, stainless steel inlet tube and a great new look. This Lightweight Slip-On weighs approximately 5.5 lbs.

The DG Performance systems offer increased throttle response, power and torque. Standard sound level is approximately 98 db. Equipped with a US Forestry approved spark arrestor.

Select Model

DG Quiet Insert

The 1" Quiet Insert will shush up the sound level of the DG pipe from about 99db down to about 96db. Definitely takes the sharp edge off the bark.


Pro Circuit T-4 Exhaust System

pro circuit procircuit t4 t-4 exhaust system

This exhaust system is ideal for a racer on a budget that is not willing to compromise on performance! The T-4 comes complete with our stainless head pipe that works in conjunction with the silencer to produce more power from bottom to top. The use of stainless steel for the header pipe offers increased strength and should give years of trouble-free use. The silencer canister is easy to repack by removing the inlet cap screws and re-wrapping the silencer core. The T-4 meets all AMA sound restrictions.

! Exhaust system orders ship Parcel Post (6-10 business days) within the US.  Why?


Universal Stainless Repack Kit

Universal Stainless Repack Kit

Re-pack your silencer with this pro-quality, three layer packing system and restore the power you have blown out.

Kit includes:

  • 60"x20"x1⁄4" glass mat.
  • 7"x20" stainless wool
  • 8"x20" stainless mesh
  • Twelve 3⁄16" rivets
Choose Length:

Muffler Packing Pillows

(Made in USA)
Muffler Packing Pillows

The latest in muffler packing technology. Spec 31 high performance muffler packing resists breakdown up to 1400°F, is universal and easy to install. Pillow can be trimmed to length to fit different mufflers. Comes with cap stuffer to fill packable end caps.

Lighting & Electrical

Back to Top



Lithium Featherweight Firepower Battery

Lithium Featherweight Firepower Battery

Built with the latest in Lithium Ion Polymer Technology. All components are designed, manufactured, assembled and packed in one location assuring high quality and consistency. Besides extreme lightweight (50% to 70% lighter than standard lead-acid batteries) it also features a built-in LED test gauge and the ability to mount it in any position. There is no hazardous acid or heavy metals, it is non-explosive and non-combustible.

The Firepower features Increased cranking amps over lead acid batteries and has a very fast recharge cycle and can be brought up to a 90% charge within 6 minutes and also has 6 to 12 times more cycle life when compared to lead acid batteries. A 2-year warranty insures that your investment is protected.

This is a 150 CCA (Cold Cranking Amp) battery.


Shorai Power Lithium Iron Battery

DR350SE all
  • No more dead batteries. Holds charge for one year without maintenance
  • Two to four times the life of lead-acid batteries
  • Carbon Fiber Composite Case
  • Faster cranking for better starts
  • Environmentally friendly, just discharge and dispose
  • Ultra light and compact - You could easily carry a spare!

Shorai recommends the LFX14-L2 for this application.
  • LFX14-L2 measures 4.5" x 2.25" x 3.5", weighs 1.61 lb and is rated at 210 cranking amps
  • For reference the stock YTX7L-BS weighs 6 lb and is rated at 100 cranking amps
  • Each Shorai battery includes self-adhesive foam panels to achieve a snug fit in your battery box


3800 Lumen LED Headlight Bulb

3800 Lumen LED Headlight Bulb

New and improved. Brighter (3800 Lumens), better low/high beam contrast, smaller, lower Kelvin color temperature (5500K), replaceable drivers and easier to install. All of these features and the most reliable LED bulb currently available. It only draws 20 watts.

This bulb fits H4 bases only, has Cree XML2 emitters and is fan cooled for extreme conditions. Further features include vibration proof and water-resistance, even complete submersion.


Heavy Duty 12V H4 Bulb

Heavy Duty 12V H4 Bulb

This is a standard H4 bulb that has an 90 watt low beam and a 100 watt high beam. This is an easy lighting upgrade that should not over tax a stock charging system.

Choose Kit:

Trail Tech Equinox 60mm LED Light

Trail Tech Equinox 60mm LED Light
Trail Tech Equinox 60mm LED Light

Trail Tech's 60mm LEDs are perfect for any riding adventure, no matter the conditions. Throwing out over 1,000 lumens brightness at only 10 watts, it is one of the most efficient lights on the market.

Three power modes allow performance at any circumstance, from Hi mode for lighting up the night to Low mode for daytime driving light.

The anodized billet aluminum housing is durable and promotes better heat management. Aluminum reflector with vacuum metal deposition creates the most accurate spot beam.

Choose Beam Type:


VisionX Solstice 10 Watt LED Light

VisionX Solstice 10 Watt LED Light

Each 10 watt Solstice Solo produces 900 lumens. Roughly equal to a 50 watt halogen bulb. These are still one of the brightest LED off road lamps on the market. The rugged and compact 2" x 2" square die-cast aluminum housing makes mounting easy. The Solstice Solo also features a 4 sided channel design that allows you to interlink it on all four sides with another Solstice Solo pod. Includes stainless steel mounting bracket and waterproof connection. The Elliptical pattern is wide and flat. Sold each.

Choose Mount:

RAM Light Mounts

For LED Auxiliary Lights
RAM Light Mounts

The perfect solution for mounting those LED auxiliary lights. The base of the RAM mount is held by your mirror. This puts the light where you can easily adjust the angle for different riding situations. We have 2 types to choose from. The Equinox mount fits Trail Tech Equinox lights or any other light with a 10mm or 3/8" mounting stud. The Solstice mount fits VisionX Solstice lights or any other light with a 6mm or 1/4" hole in the mounting bracket.

Sold individually.

RAM Light Mounts RAM Light Mounts RAM Light Mounts


Taillight Lens w/ Clear Panel

This lens has a clear panel to illuminate your license plate. Allows bolting the plate directly to your fender.


LED Taillight/Brake Light 1157 Bulb

LED Taillight/Brake Light 1157 Bulb

A LED Taillight/Brake Light bulb uses considerably less energy than a standard filament type bulb. LED brake light will draw approximately 1 watt while a filament type draws in excess of 15 watts. This means less power draw and additional power for accessories.


New! 050118

LED License Plate Frame

(Made in USA)
License Plate Frame w/LED Lights

This black motorcycle license plate frame includes six white full-spectrum HID type LED bulbs on a 6-inch strip for bright illumination of your license plate. The LED motorcycle license plate frame is made with a sturdy cast aluminum and powder coated in a black finish that won't easily come off or get scratched. You can see the six LED's in the upper edge of the frame in the image above.

Outside frame dimensions are 7.25 in. wide by 4.2 in. tall for a license plate that is 7.1 in. x 4.1 in. The center to center mounting hole distance is 5.7 in. All mounting hardware is included.

Choose Package:

Koso Mini 3 Temp/Clock/Volt Gauge

Koso Mini 3 Temp/Clock/Volt Gauge
Koso Mini 3 Temp/Clock/Volt Gauge

This Mini 3 meter was designed to help you monitor basic information before and during a ride. Check the condition of the battery before leaving and the voltage of your system during the ride. The ambient temperature function will give you a good reference about how to dress prior to and what is happening during your trip. It can be very handy to know if the temperature is near or below freezing. The large clock makes it easy to know if you are on schedule or not.

Dimensions: 2.4" W x 1.2" H x .5" D.

Available for the Mini 3 is a nicely crafted mounting plate that allows you to place your new gauge wherever you like.

Choose Package:

12V LED Flashlight/Charging System Indicator

12V LED Flashlight/Charging System Indicator

This great little 6-LED flashlight goes right into your SAE battery charging socket for hours of light. In addition, it has a charging system check that lets you know if your bike is charging properly. All with a 40 inch cord so you can see in those out of the way places when you need to.

Don't have a cable from your battery? Well, select the package and we will include a cable that goes from your battery to a SAE type connector to plug in your light or charge your battery when at home. This is a fused circuit to protect your battery.

Choose Package:

Optional Add On:

Panel Mount SAE Socket

OptiMATE Cable O-20
OptiMATE Cable O-20

The Optimate Cable O-20 is a SAE weatherproof bulkhead/panel mount power source. Main body fits a 1" dia. hole. With space in the dash area of the DR kind of limited, we offer an optional stainless steel bracket that will bolt to your handlebar clamp, making for a clean and easy installation. Overall length of the unit is 12" from top of bulkhead to end of connector. Both connectors are industry standard 2-pin SAE connectors.

Cable max. rating is 10 Amps. Includes an in-line rubber seal at the connector end and a protective cover at the bulkhead for when you don't have something plugged in. Unit has a 3-year limited warranty.

Don't have a cable back to your battery? Then select the package that includes that as well.

Lower image shows the mount side with the optional Mounting Bracket installed.

Choose Package:

OptiMate Cable O-40

OptiMATE Cable O-40

The OptiMate Cable O-40 is a SAE to SAE weatherproof bulkhead/panel mount. Main body fits a 18mm (23/32") hole. Overall length of the unit is 40" from top of bulkhead to end of connector. Both connectors are industry standard 2-pin SAE connectors.

Cable max. rating is 10 Amps. Includes an in-line rubber seal at the connector end and a protective cover at the bulkhead when you don't have something plugged in. Unit has a 3-year limited warranty.

Don't have a cable back to your battery? Then select the package that includes that as well.

Choose Package:

USB Device Charger

USB Device Charger

This mini USB device connects to a battery cable with a SAE connector just like the typical Battery Tender outlet and allows you to charge your iPad, iPod, iPhone, GPS unit, camera or Smart phone. Input is 12 Volts, output to the USB port is 2.1A maximum, perfect for your phone or low or other USB devices.


Noise Isolating Earbuds/Speakers

click to enlarge

These lightweight earbuds function like any other set of earbuds, but make a better and more comfortable seal. This helps put music, phone, GPS, intercom, etc. from the built-in speakers, to where it matters most. The unique earplug design ensures that wind and engine noise is blocked and more sound from your device is channeled straight to your ear. The ComforTwist™ Foam Plugs have a Noise Reduction Rating (NRR) of 23db. The ComforTiered™ Silicone Plugs have a NRR of 26 db. Their low profile allows them to easily fit under your helmet. Total length of wire is 54", enough to reach just about anywhere you need.

This new version includes an IsoTalk™ Noise Isolating Mic with a Quickdraw™ Easy Access Control. Complete instructions for all aspects of the unit are included with each set.

If you would like just standard high-quality NoNoise Ear Plugs, click here.




These simple add-ons stretch and grip to the finger of your favorite glove using Grrprr technology. Users can operate a phone or any touch screen device and never have to remove their nice warm gloves.

A special conductive material enables you to interact with capacitive touch screens quickly and easily. There are two ThumbDogs to each package so you can double digit type just like you would in the real world. You can also put one on your index finger to operate your GPS.

Choose Package:

Micro-Start Portable Jump Start and Power Supply

Micro-Start Portable Jump Start/Power Supply
Micro-Start Portable Jump Start/Power Supply

A device that you can keep in your fanny-pack, backpack or even pocket that can jump-start your motorcycle or car. It can also charge your cell phone, GPS unit, laptop or other electronic devices.

  • XP-1 is 6" x 2 7/8" x1" 14oz.
  • XP-3 is 5" x 2 7/8" x 1" 12oz.
  • Holds a charge for up to a year.

Review by Dirt Wheels Magazine

  • 200 Amp- 400 Peak Amp
  • 12000 mah Capacity
  • 19V Output Port for Laptops
  • 12V Standard Output Port
  • 5V 2A USB Port
  • Detachable Mini Jumper Clamps
  • 3 power ports: 19v for lap tops, 12v standard output, and a USB 5v output for USB powered devices
  • A Universal Cable with 8 different detachable tips to fit all the different brands of Laptop charging ports (Apple, Acer, Dell, HP, Asus, and more)
  • A Universal Cable for 12v standard plug accessories such as Mobile DVD players and heated gear. (8amp max)
  • A Universal USB Cable with 4 of the most common connectors (iPhone, Lightning, micro USB, mini USB) for portable Electronics such as Cell Phones, iPads, iReaders (Kindles), PSPs, GPS, tablet computers, and anything else using the 5V USB standard
  • 1 Home Charger (to charge the XP-1)
  • 1 Mobile Charger for plugging into cigarette lighter socket (to charge XP-1)
  • Nylon zippered carrying case
  • 200 Amp- 400 Peak Amp
  • 8000mah
  • 5V 2a USB Port
  • Micro-Start XP-3 Unit
  • Detachable Mini Jumper Clamps
  • A Universal USB Cable with 4 of the most common connectors (iPhone, Lightning, micro USB, mini USB) for portable Electronics such as Cell Phones, iPads, iReaders (Kindles), PSPs, GPS, tablet computers, and anything else using the 5V USB standard
  • 1 Home Charger (to charge the XP-3)
  • 1 Mobile Charger for plugging into cigarette lighter socket (to charge XP-3)
  • Nylon zippered carrying case


Shorai Charger

You can charge your Shorai battery with a regular battery charger but if you want the very best for it, this charger is designed for optimum performance by balancing the individual cells in the battery. Balanced charging ensures the battery reaches its fullest capacity and longest life. 'Store' mode allows long term maintenance & storage.

Shorai Charge/Store Dedicated Battery Management System for Shorai LFX only. 2A Max charge rate, connects via BMS 5-pin port on LFX batteries. Includes modes for full charge, or long-term storage. Input USA 110~120V 50/60 Hz.

For Shorai Lithium Iron batteries only

Choose Optimate:

Optimate Battery Maintainers/Chargers

Optimate Battery Maintainers/Chargers

Optimate 1 Global Charger-Maintainer

This charger is perfect for 24 hour, 7 days a week, 365 days a year smart battery maintenance. It delivers precise microprocessor controlled charging and long term maintenance. Maintain any type of 12 volt lead-acid filler cap / wet cell, sealed AGM (MF) or GEL battery without overcharging. Ideal for vehicles that are seldom or seasonally used, or in storage. Global Three-step charging program ensures effective charging of the battery and is totally safe for prolonged connection to the battery, without risk of overcharging. Automatic shut-down if short-circuited or battery disconnected. Dust proof case with wall mounts, with 6ft AC supply lead and 6 ft. charge lead ending in SAE connector. Velcro strap slot to hang the charger on handlebar. Weatherproof battery lead & OptiMate battery clip set included.


Optimate Battery Maintainers/Chargers

Optimate 2 Maintainer

OptiMate 2 senses the battery condition, recharges and then keeps the battery 100% ready. The OptiMate maintenance program delivers only what the battery needs, never overcharges, never undercharges. Provides power to the on board computer, display or antitheft alarm. Totally safe for vehicle electronics. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected. Works with standard filler caps, and sealed maintenance-free units. Includes permanent ringlet connector with weatherproof cap and battery clips. Comes with global input (100-240V).


Optimate Battery Maintainers/Chargers

Optimate 3 Optimizer

Recovers sulphated batteries and then tests after charging. The maintenance program delivers only what the battery needs, never overcharges, never undercharges. Provides power to the on board computer, display or antitheft alarm. Diagnoses, recovers, charges, tests and optimally maintains, automatically. Comes with global input (100-240V). For batteries forgotten over the winter, OptiMate 3 will recover them from deep discharge and optimally recharge them. Batteries status can be checked at a glance. OptiMate 3 will then maintain the battery at full charge safely for months at a time and increase life by up to 400%. Works with standard AGM, and gel batteries. Do not use with Lithium batteries.


Optimate Battery Maintainers/Chargers

Optimate Lithium

OptiMate™ lithium, the first OptiMate to protect your LiFePO4 battery unlike any other charger. Will protect your investment and keep your Lithium Iron Phosphate (LiFePO4/LFP) battery performing as advertised for a very long time. With 5 Amps of charge current available, OptiMate lithium's unique multi-step ampmatic™ program recharges and balances cells within the battery quickly and efficiently. Optimate lithium's maintenance program delivers current to the vehicle circuitry, protecting and keeping the battery at 100% charge. Tests and displays battery condition before charging. Voltage retention test is conducted for 30 minutes during which no charge current is delivered, and provides results indicating the battery's general state of health. The 12-hour MAINTENANCE CHARGE CYCLE consists of 30-minute float charge periods at a voltage of 13.6V followed by and alternating with a 30-minute "rest" (no charge current) periods. Includes permanent ringlet connector with weatherproof cap and a set of battery clips.


New! 031518

Battery Tender Jr. Selectable

Battery Tender Jr Selectable

The Battery Tender® Junior Selectable is a trickle charger with a brain. It will keep your Lead Acid, AGM or Lithium battery fully charged so that it is ready to go when you are. It's fully automatic, small and lightweight-great for small spaces.

This smart charge has battery chemistry selection and will automatically select the battery type and then complete a 4-step charging program (Initialization, Bulk Charge, Absorption Mode, Float Mode) with a max output of 12v @ 800mA. Then it will automatically switch to float/maintenance voltage after fully charging the battery. If the battery voltage drops too far under load, full charger output power resumes. It also has a solid state two color LED that indicates state of charge.

Put the clamps on the wrong terminals and reverse polarity protection takes over. No sparks - no problems. A 12 foot output cord, a 5 year warranty and the fact that it meets CA and OR appliance energy efficiency standards for battery charging systems make this a great little unit.



click to enlarge

The signalMinder unit is designed as a plug-in replacement for many Japanese bikes. This unit will automatically cancel your turn signal if you forget to shut it off.

  • Cancels signal at 10, 20 or 30 second intervals
  • Allows you to use turn signals as running lights
  • 4-way hazard option
  • Brake flash option

SM-3 unit is designed as a plug-in replacement for most Honda and some newer European bikes. signalMinder uses a computer chip to cancel the turn signals. There are three selectable time outs; 10, 20, 30 seconds.

RUNNING LIGHT OPTION: By attaching two quick-connect wires included, you can convert ALL FOUR turn signals to running lights and establish a dual-channel system on your bike.

Special Note! For 2009 and up Kawasaki models that have onboard computer diagnostics, or if you have Alarm system that activates turn signals, please select SN-4D harness shown below.

Using the DIP Switch #1, you can keep them off and still have the dual-channel system. With the dual-channel system, when you activate the RIGHT turn signal three times in succession, you get 4-way hazard flash function.

BRAKE FLASH OPTION: will flash the turn signal lamps every time you apply brakes. A short 2 second flash pattern begins with quick flashes then slows down to stay on solid.

BRAKE OVERRIDE OPTION suspends the time-out feature until the brakes are released. This allows continued flashing for those times when you are waiting at the signals to make a turn and do not want the time-out to cancel the flashing.

Optional Add on:


Tuff Lites Flexible LED Turn Signals

Sold in pairs
>Tuff Lites Flexible LED Turn Signals

They're back at last! The new folks at Extreme Dual Sport are now making the Tuff Lites again. The unique feature is a metal spring in the Tuff Lite stalk to allow it to bend a long way in any direction without breaking.

  • Flexible stalk, 180 degree deflection with no fatigue
  • Ultra tough housing and lens
  • All weather

LED turn signals require an LED flasher. Diode kit is required for bikes with a single turn signal indicator on the dash. More Info

Optional Add on:


"Crash Advantage" LED Turn Signals

Sold in pairs
"Crash Advantage" LED Turn Signals

These bright LED turn signals will bend more than 90 degrees without damage. Only 2 1/2" long!

LED turn signals require an LED flasher. Diode kit is required for bikes with a single turn signal indicator on the dash.


Mini Turn Signals

4 Pack
Mini Turn Signals

These signals have short rubberized flexible stems and bright mini halogen bulbs.


Brake Light Safety Pulser

(Made in USA)
Brake Light Safety Pulser

Grab the attention of rear-enders! This device will pulse your brake light automatically to get their attention. There are over 1000 possible pattern combinations with individually programmable Flash Speeds, Pre-Delay, and Flash Durations, as well as a disable feature to disable the unit. This device gives the end user the widest range of possibilities for customizing your tail light safety flash. With simple programming setup using only your brake lever, their is no disassembly or removing of the seat required to change the programming on the device.


  • Independently programmable flash speed, flash duration, and pre-delay.
  • Works for LED or Standard Bulb Tail Lights.
  • All Solid State design.
  • Meets or exceeds OEM load rating specifications.
  • Designed for DC electrical systems (most are).
  • Over 1000 possible flash pattern combinations.
  • Simple programming setup with your brake lever.
  • Extremely compact unit size; 20mm x 20mm x 12mm.


Digital Voltmeter and Bracket

A digital voltmeter that can be mounted almost anywhere thanks to our multi-position stainless steel bracket. This will tell you how your charging system is doing and whether or not you need to turn off the laptop and in-flight movie system for awhile. Completely waterproof and comes with connectors, wires and thorough instructions. We consider this a 'must have' device for riders who use heated riding gear, heated grips, additional lighting, etc.
Choose Package:

LCD Digital Voltmeter-Quick Disconnect

LCD Digital Voltmeter-Quick Disconnect

Deltran quick-disconnect plug with LCD voltmeter display. Plug this into your Battery Tender, or any SAE cable, to see a LCD display of the battery voltage. Three LED lights indicate the state of charge as well. Easily unplug it whenever you need to get the charger hooked back up.

Include Power Port:

Select Charging Cable:

Weatherproof USB Charging System

Weatherproof USB Charging System

This compact, easy to mount, all weather USB Power Port is the answer for powering and charging your USB devices including cell phones, smart phones, most GPS units, MP3 players and some digital cameras.

Power port connects from battery to handlebars using included universal mount.

Select the correct charging cable for your application by clicking on "More Information".

click to enlarge click to enlarge
  • 18" power port and charging cables
  • Input Voltage: 12V ± 4.0V
  • Output Voltage: 5V ±.25V
  • Output Current: 1A Max
  • 3BR Powersports Universal Mounting System
  • Powers Garmin GPS as well as most cell phones and any other device that charges using 1A or less of USB power

Red Band USB Smart phone Quick-Charge Cables (Micro style connector)looks like standard USB data cables but have the built-in ability to signal smart phones such as Android or Windows to charge at full rate when plugged into any "dumb" charger such as car chargers, wall adapters or 3BR Powersports TAPP series of all-weather USB power ports. Charging at full rate can reduce the charging time by as much as two hours and will easily keep up with power hungry applications such as GPS or video.

Red Band GPS Power cables (Mini style connector) enable Garmin Nuvi GPS to navigate when plugged into a generic USB power port. Garmin Nuvi uses the cable to determine which mode, navigate or data, the GPS should be operating in. Using a standard USB data cable to power a Garmin Nuvi will cause it to go into data mode for transferring maps, route/track data, pictures etc. The Garmin factory power cable is used to enable navigation mode. However, the Garmin power cable is unsatisfactory for powersports applications as it is not weatherproof, is way too long and is only supplied with a cigarette lighter-type of plug. The 3BR Powersports Red Band GPS power cable looks like a standard USB power cable with a USB Type A plug on the source end but it has internal circuitry to make it appear to the GPS as a Garmin power cable. The USB Type A plug allows powering the GPS from any generic USB port and allows use of 3BR Powersports power port cables for full all-weather protection.

Body & Frame

Back to Top


Clarke 4.2 Gallon Gas Tank

DR350 offroad models

Increases fuel capacity for longer range than stock. All necessary hardware is included.

! NOTE: Clarke tanks do not come with a vent hose or vent cap. If you do not have one, click here to order one.

! Fuel tank orders ship Parcel Post (6-10 business days) within the US.  Why?


Acerbis 4.25 Gallon Gas Tank

DR350 Dual Sport models

Increases fuel capacity for longer range than stock. All necessary hardware is included.

Fits DR350S and DR350SE Dual Sport models. Available in white only.

! Fuel tank orders ship Parcel Post (6-10 business days) within the US.  Why?


Fuel Tank Filter

Fits Acerbis and IMS tanks
Fuel Tank Filter

Fuel supplies can be sketchy at times. This filter lives in your tank to trap dirt and debris as it is poured into the tank. Features a custom shaped adapter that fits securely under the gas cap, creating a leak-proof seal. If it stays out of your fuel, it can't get into the carb! Created by the filter experts at Twin Air, this filter fits IMS and Acerbis gas tanks.

This unit does NOT fit the Clarke Tanks.


Seat Concepts foam & cover kit

(Made in USA)  DR350 all

Seat Concepts dual-sport/adventure seat-kits incorporate a wider seating area for the rider, which results in more even weight distribution, while reducing pressure points. Each individual seat model has been specially designed to increase comfort without compromising rideability. The more aggressive the bike, the more aggressive the seat-kit.

Each kit contains detailed instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price.

! Seat orders ship Parcel Post (6-10 business days) within the US.  Why?

Choose Top Seat Texture:

Choose Side Panel Texture:


Corbin Seat - Dualsport Riding Comfort

Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.

Corbin seats are custom made and carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.

Because Corbin seats are custom made to order. Please allow about 2 weeks lead time to have the seat built.

The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides. You can view all of the available materials and colors on Corbin's Website.

! Seat orders ship Parcel Post (6-10 business days) within the US.  Why?


AirHawk Seat Cushion

So you're not ready to dish out $300 for a new seat but you can't stand to sit on the stocker for more than 50 miles. The Air Hawk might be the answer.

  • Air filled Airhawk 12"x18" cushion custom fits your shape and redistributes pressure that causes numbness and discomfort when you ride
  • Seat cushion cover is constructed of a breathable, stretchable Nylon/Lycra blend with a non skid Urethane base
  • Open mesh side panels allow heat to escape
  • Easily inflates by mouth with no pump needed
  • Mounting straps and Repair patch kit included


Choose Tint:


Dual Sport Windscreen

Dual Sport Windscreen Dual Sport Windscreen

Windscreen attaches to your bike's handlebars. Fully adjustable mounting brackets. Includes 7/8' handlebar clamps. Will not fit 1 1/8" oversize handlebars. 14" tall 10" wide.


Skid Plate

DR350 all
  • Made from strong and lightweight aircraft aluminum
  • Protects vital engine parts from rocks and debris
  • Custom fit to your specific bike model
  • Oil drain hole for easy access
  • All mounting hardware included


DSA Concepts Front Fender

(Made in USA) DR350

This is a new front fender made by DSA Concepts that is shaped very much like the OEM DRZ400SM front fender, but larger. Big enough to be functional in the wet and mud. Great look for the bike!

!  Front fender orders ship Parcel Post Only! within the US. Why?


Fender Brace

By popular demand - A stainless steel front fender brace. Helps stabilize your front fender. Gives additional strength for carrying a fender mounted tool bag. Fits on top of the fender and bolts between the fender and bottom triple clamp. Requires you to drill one hole in the fender for mounting. Stainless steel won't rust or corrode. Includes hardware!



JNS Engineering Rear Master Cylinder Guard

(Made in USA)  DR350 all

Protect that vulnerable rear master cylinder with this thick aluminum guard from JNS Engineering. CNC laser cut then bent and given a clean black powdercoat finish. Includes new flanged button head bolts and aluminum spacers.


Back to Top
Select Rims:


ProCycle Supermoto 17" Wheel Set

Requires Your Hubs

Choose from Excel Takasago, or top of the line Sun rims. Both come with Buchanan's heavy gauge stainless steel spokes and zinc-plated nipples. Rims and spokes are precision machined for a perfect match to your hubs.

Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.

Suzuki is no longer making hubs for the DR350. We require your current hubs (only) to complete your wheel set. Please call us for a return authorization number before shipping your hubs.

  • Your hubs shipped to us
  • Excel or Sun 3.5" x 17" front rim
  • Excel or Sun 4.25" x 17" rear rim
  • Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples

Add any set of SM tires to your order and we will mount and balance for free! Tubes and rim strips included.

Rims and spokes are custom made to order and cannot be canceled. Please allow 1-2 weeks for delivery.


Back to Top
New! 022018

Check out the Tires page!

Link to Tires page

We've moved all our Tires and Tubes and to a single page to make it easier for you to find exactly what you want. Click here to go to that page and get those tires added to your order!

Tire tools and accesories are located at the bottom of the new Tires page. Click here for Tools and click here for Accessories.


Back to Top


EBC 320mm Supermoto Brake Rotor

DR350 '98-'99 (six bolt hub)
  • High friction 320mm steel rotors for greater stopping power over stock rotors
  • Includes a caliper relocation bracket
  • Designed to fit standard hubs

EBC Brake Pads

  • Sintered Pads are best for regular riding. Long life, and good performance in all conditions
  • Sport Carbon pads are made for fast riding in dry conditions. Not recommended for mud, water, or sand
  • Race Sintered are designed for racing use


Billet Rear Brake Clevis

Bling for your bike. This sweet blue anodized billet piece replaces the stamped steel clevis that connects your brake pedal to the master cylinder.



Bel-Ray DOT 4 Brake Fluid

Bel-Ray's Super DOT 4 brake fluid is specially formulated to exceed all DOT 3 & DOT 4 specifications. What this means to you is exceptional resistance to vapor lock and maintaining consistent lever feel during hard brake use. This 12 fl. oz. bottle is enough to finish just about any job.

  • Formulated for hydraulic brake systems
  • Mixes with all fluids meeting DOT 3 and DOT 4 specifications
  • Boiling point: dry 446°F, wet 311°F
  • For brake systems and hydraulic clutches, except systems using mineral base fluids


Mini Bleeder

  • Combines wrench and bleeder valve into one convenient and compact tool
  • Fits most 8 mm bleeder nipples
  • Bleeds brake systems and hydraulic clutch systems
  • Internal check valve for fast easy bleeding
  • Anodized billet aluminum handle with chrome moly steel body
  • Compact size for tight spaces
  • High quality internal seal
  • Multi position handle


EBC 280mm Front Brake Rotor

DR350 '98-'99 (six bolt hub)

Better stopping power over stock! Made with heat-treated carbon steel for longer wear life and reduced galling.


Brake Pins

DR350/DR250 all

Replacement retaining pins for the rear caliper. The stock pins have a 5mm Allen head which can make removal of seized pins very difficult. These pins have a 8mm external hex so you can use a box end wrench on them. Be sure to use some Anti-Seize on the threads when you install them.

Stock pins
Hex head pins



Back to Top

Select Kit

Oversize Handlebar Kit

Gun metal gray
Oversize Handlebar
Rise Insert

Upgrade your bike with Aero 1-1/8" bars. Constructed of Aircraft grade 7075 taper walled aluminum that tapers to a standard 7/8" to accept stock controls.

  • Bead blasted surface for added strength
  • Laser accurate steering
  • Dissipates shock and reduces rider fatigue
Select Bar:


Fly Handlebars

Fly Handlebars

These handlebars are high quality at an affordable price. Several bikes here in the shop use these bars and we like them.

  • 7/8" mounting area, fits stock mounts
  • Manufactured from 6061 T-6 aircraft aluminum
  • Knurled center section and clutch end
  • Bar pad included
  • Reduces rider fatigue by absorbing impact, shock and vibration

  • OEM  W=787, H=76, R=50, S=72, B=18 deg.
  • CR High W=802, H=99, R=65, S=54, B=13 deg.
  • KX/RM W=805, H=93, R=50, S=55, B=14 deg.
  • YZ/WR W=803, H=92, R=56, S=57, B=15 deg.


Billet Throttle Tube

Suzuki makes it almost impossible to replace your stock grips. It's much easier with a new throttle tube. Removable end cap for bikes with hand guards.

! Fits bikes with dual cable throttle housings.



Vista Cruise Throttle Lock Kit

DR350 all

Ease the pressure on your wrist during those long highway drones out to where the fun begins. ProCycle has developed this kit that includes a Vista-Cruise throttle lock, a specially modified alloy throttle tube and an anchor plate that attaches to your throttle housing. Just flip the thumb lever down to apply enough friction to hold the throttle in place. Use the supplied longer screw to attach the anchor plate to your lower throttle housing bolt hole. Also included is a tension adjustment tool that you can keep on your key ring. Keep the applied tension lightly adjusted so it's easy to roll the throttle off.

! Fits bikes with dual cable throttle housings.


Go Cruise Cruise Control

The Go Cruise cruise control goes over the throttle grip and rests on the brake lever to hold your throttle open allowing you to stretch and rest your hand on long rides. Installs and removes in seconds with no tools. You can roll off the throttle manually to disengage the Go Cruise.

Select Controller

BikeMaster Heated Grips

Highly efficient design delivers warmth faster than traditional heated grips.

Choose from the standard five level push button temperature controller, or the LCD display controller which shows the selected heat level and available battery voltage.


Chromoly Wide Footpegs

DR350 all
Light weight and strong. These DRC footpegs have a wider platform for increased comfort and control. Cast from Chromoly steel for unbeatable strength and durability.


IMS Super Stock Footpegs

Wider footpegs for sure-footed comfort. Cast stainless steel.

Choose Size:

Doubletake Mirrors

Sold Separately
Enduro Mirror

ADV Mirror

Made from a nylon and fiberglass composite, these mirrors are extremely durable. They easily fold out of the way when you head off-road.

Enduro Mirror 4" diameter

Ideal for dualsport use, where you want the absolute minimum profile when folded down. SAE spec convex glass gives a much greater field of view than flat glass.

ADV Mirror 3" x 5"

Adventure mirrors are designed for adventure riding where you want your mirror extended most of the time.

Mirrors mount to any 10mm perch. Mirror and arm included as shown in pictures. If you need a mount for your mirror, click here to see our split clamp mirror mount and mirror mount adapter.


Folding Dualsport Mirror

Sold separately
Folding Dualsport Mirror

This new mirror screws into your stock mirror mount but can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price of the KTM part. Fits either left or right side.


Cable Luber

Keep your cables lubed up and working freely. This tool is used to inject lubricant into cable housing. Clamps over housing and wire allowing an aerosol can to be connected. Once lube runs out the far end, the cable is lubricated.


New! 031017

Motion Pro Cable Luber V3

Motion Pro Cable Luber V3

A new type of cable luber from the tool people at Motion Pro. Designed to seal completely around the cable housing and stop all those messy leaks. Because the unit is closed and sealed before pumping the lube down the cable, your cable gets more lube! A lubed cable is a happy cable!

Keeps things clean and simple. No more lube running down your arm. Works on most cables with a 4mm to 8mm OD housing.


Dri Slide Cable Lubricant

Goes on wet but evaporates to leave a dry moly film. This unique dry film won't attract dirt or dust, is highly resistant to water, and prevents rust and corrosion. It is the perfect lubricant to use on brake and clutch cables. Includes applicator needle to get into cables, locks and anything else that needs dry lubrication.

Choose Color


Rox Pro-Offset Elite Block Risers

(Made in USA)
Rox Pro-Offset Elite Block Risers Silver
Rox Pro-Offset Elite Block Risers Black

This unique design from Rox allows you to move your bars either closer (1" up and back) or further away (1" forward and 1-1/4" up) depending on rider preference. These risers have an oblong mounting hole so that they will fit virtually any triple clamp with 8mm bolts. A set of reducers lock into the risers ensuring no slippage whether you have a 7/8" or 1-1/8" bars.

Choose Bar Size:


Powermadd 2" Handlebar Riser

Powermadd 2" Handlebar Riser
  • 4.75" wide, requires 7/8" bar clamps on bike
  • Raises handlebars 2 inches and allows fore/aft position adjustment
  • Provides dual pivot points for optimum bar positioning
  • One piece design is made from solid aluminum for superior strength
  • Available for 7/8" or 1 1/8" bars

OEM Replacement Levers

DR350 all

Order up your new levers here! If you keep breaking levers, you might want to think about a set of handguards to protect them in case of a fall.


Quick Throttle Tube

Opens your throttle 15% faster. No more 'double handfuls' to get it wide open. Removable end cap for bikes with hand guards.

! Fits bikes with dual cable throttle housings.


ProGrip 714 Rally Grips

Our Favorite Grips!

Replacing your handlebars? Time to replace those worn out grips? These grips feature a thicker design that dampens vibration. The soft shoulder allows ease of movement. Three wire-tie grooves are molded into the grip to make securing them a breeze.


Crampbuster Cruise Assist

(Made in USA)

This little jewel reduces hand fatigue and cramping on long rides or daily commutes. The Crampbuster is not a throttle locking unit but rather a simple clip-on device which allows you to relax your grip while riding.


Footpeg Extensions

Weld-on footpeg extensions to make footpegs 1/2" wider and longer. These will give you a much more stable platform when standing on the pegs. Sold in pairs.


Folding Shift Lever

Replacement shift lever with folding tip.


Bar-End Mirrors

Sold in pairs
Bar-End Mirrors

Bar end mounted mirrors move the mirrors out past your elbows so you can actually see what is behind you. They can mount with or without hand guards.

Choose Size:


PSR Dualsport Mirrors

Sold Separately
PSR Dualsport Mirrors round PSR Dualsport Mirrors oval

PSR dualsport mirrors come with a slightly convex mirror for a wider field of vision behind you. The round mirror is 4.25" in diameter while the oval is 3.75" x 3". These mirrors are easily adjustable and fold out of the way quickly with the 1" RAM mounts.

The RAM Ball Stud Base used for both mirrors will go into any standard 10x1.25 threaded mirror base. If you need a mount for your mirror, click here to see our split clamp mirror mount and mirror mount adapter, both on our Dual-Sport page.

Sold each. If you need a set, please order 2.


Mirror Extenders

(Made in USA)

Can't see past your shoulders? These 2.5 inch long mirror extenders will get your mirrors higher and farther out for a much better view of the road behind you.

  • 10mm Threads
  • Sold in pairs
Mirror Extenders
Select Color:


Acerbis X-Factor Hand guards

Acerbis X-Factor Hand guard

New from Acerbis, these hand guards come with mounts that will work on both standard and and oversize bars. The aluminum wrap-around bar is the biggest on the market with two large plastic shields that are also some of the largest we have ever seen.

Works with 7/8" or 1-1/8" bars.


Moose Molded Foam Hand Guards

Moose Molded Foam Hand Guards
Moose Molded Foam Hand Guards

Riding in the harsh conditions of winter? Good, we are too. These foam hand guards are great. You get the extra protection in bad weather to help keep your hands warm and dry. These just about double the protection from most plastic type deflectors.

The outer shell is made from heavy-duty 500-denier nylon with 1/2" closed cell foam to keep the wind, cold and rain at bay.

Luggage Racks

Back to Top

Nomadic Rack

'90-'01 DR350, SE and R models (Made in USA)
fly trekker helmet

A Nomadic Rack is now available for the DR350. CNC laser cut from 1/8" aluminum with a large 12.5" (length) x 10" (width) mounting surface area. This rack is an easy 15 minute installation with a 4 point mounting system with no modifications required. There are integrated turn signal mounts and multiple strap slots for securing gear bags and cargo. Is compatible with RotoPax mount. All hardware and instructions included.

Packages available include just the Nomadic Rack, or you can order the Rack with the RotoPax Mount. If you really want it all, you can order the Rack, Mount and a Fuel or Water Container. Select package from dropdown and click 'Add To Order'.

fly trekker helmet fly trekker helmet
Select Size/Color:

ROK Straps

The ultimate stretch strap

These flat tie down 'stretch' straps are designed specifically for motorcycles, ATVs and snowmobiles. Carry anything on your motorcycle securely and without scratches with these flat - no hooks - tie down straps.

ROK Straps are a must have for any dual sport or adventure rider!

ROK Straps are a two-piece strap that has a quick-release buckle in the middle and loops on each end.
One end of the strap is a heavy duty nylon, the other has a strong stretchable section. Instead of hooks
that can slip or come undone, ROK Straps have a loop sewn in each end. you pass the buckle around
your frame, rack or other secure point and then back through the loop in the end making for a very secure
mount. With each end secured, connect the buckle in the middle and simply tug the slack end of the strap
until your load is firmly held in place.


Back to Top

Saddlebags & Hard Cases

Choose from a huge selection of sidebags and hard cases from top brands.

  • Wolfman Luggage
  • Nelson Rigg
  • Giant Loop
  • Moose Racing

Tank Bags

Tank bags provide easy access to personal items and come in a variety sizes, styles, and colors.

  • Wolfman Luggage
  • Nelson Rigg
  • Giant Loop

Duffel Bags

Select from an assortment of sizes, designs, and brands.

  • Wolfman Dry Bags and Rolie's
  • Saddlemen Destination Pack
  • Givi waterproof bags
  • Firstgear Torrent bags

Top Cases

Top cases by Moose Racing allow easy access and transportation of items for long rides or daily commuting.

  • Expedition Aluminum Top Cases are a perfect match for the Expedition Side Cases. Available in 25 or 38 liter sizes
  • Expedition Hard Top Cases are perfect for daily commuting and errands around town. Available in 28 or 47 liter sizes

Fender Bags

No larger image

Fender bags are perfect for carrying tools and tubes on any adventure.

  • Wolfman 1.25 Liter front fender bag
  • Moose Racing removable rear bag
  • Wolfman 3.5 Liter tool bag
  • Chase Harper rear fender pack


Luggage accessories to complete your luggage set.

  • RotoPax fuel and water containers
  • ROK Straps
  • Universal Mounting Kits
  • Much more!

Helmets & Apparel

Back to Top

Dual Sport Helmets

We have put together a great list of dual sport helmets for any budget.

  • Arai XD-4 Dual Sport features great quality and looks
  • Shoei Hornet X2 for serious dual sport enthusiasts
  • Bell MX-9 Adventure new for 2015 is everything you want at a great price
  • AFX 41-DS Dual Sport features an inner flip down sun shield
  • Fly Trekker gives great quality and price

Rain Gear

Stay dry with quality rain gear by Frogg Toggs. Frogg toggs is committed to providing the best in affordable, innovative rainwear technology. ToadSkinz technology is a newly developed hybrid fabric that was engineered by the frogg toggs research team. This unique new material has the look and feel of a traditional polyester rain suit but with a non-woven inner layer that provides guaranteed waterproof and windproof performance in a lightweight garment with great breathability.


Choose from a great selection of Firstgear dual sport gloves.

  • Ultra Mesh Gloves
  • Kilimanjaro Gloves
  • Kathmandu Gloves
  • Cold Weather Gloves
  • Many More!


We have put some common sense dual sport items on our accessories section and will be adding stuff as we find it.

  • Hydration packs by Thor and Moose Racing
  • Backpacks from American Kargo and Moose Racing
  • Neck warmers and High-Vis vests

Dual Sport Apparel

Choose from top of the line jackets, pants and our every own ProCycle T-shirts

  • Kathmandu jacket and pants
  • Urge overkill Jacket
  • Adventure Mesh jacket
  • Firstgear Thermosuit
  • Kilimanjaro jacket
  • And more!

Heated Gear

Stay warm on those long winter rides with top of the line heated gear.

  • First Gear heated clothing features Nickel Alloy heating technology
  • Venture heated gear comes standard with harness and controller
  • Heat Pump Vest and battery powered gloves also available
  • Check out our Seat warmer and Heated grips


Our favorite dual sport boots have been tested and approved by the ProCycle staff.

  • New! 100115 Forma Adventure Boots
  • Icon Raiden DKR Boots
  • Alpinestars Scout Boots
  • Gaerne Balance Oiled boots

Accessories & Tools

Back to Top

Maps and Navigation

Check out our Maps and Navigation page! Here is where you can find the latest and greatest in GPS units, fantastic printed maps and pretty much anything you need to get you from here to there and back. Or maybe from here to there and then on to someplace else! Just click here or on the gray button below.

  • Butler Maps
  • Benchmark Maps
  • Delorme Maps
  • Garmin GPS Units


Navigation doesn't get any simpler than this. Here is the ProCycle 'binary' Navigator. Don't know which way to turn? Flip the NAVIGATOR and follow your nose. It is guaranteed to lead you somewhere. Probably some place you have never been.


New! 120117

BrakeFix Parking Brake


Simply slap this baby over your brake lever and hand grip, squeeze the brake lever, pull the locking bar in and lock black portion down. Takes all of about 5 seconds. Viola! A locked front brake making parking safe and secure.

To unlock the BrakeFix, you just lift the back of the black hooking portion to release it. This takes about 2 seconds. Perfect for use with Snapjack type stands or just parking on an incline.


JIS Screwdriver Kit

The Phillips type screws used in Japanese motorcycles are actually Japanese Industrial Standard (JIS) screws are very easy to strip if you are using a regular Phillips screwdriver.

Here is a little kit that will make removing and replacing JIS screws much easier. A small portable handle with its own collection of 4 various bits, along with 2 each JIS No. 1, No. 2 and No. 3 bits. These will work in any other bit holders you may have and have a slight magnetic end to hold a screw while you start it.


Fork Oil Level Gauge

Having the proper fork oil level is imperative to the handling of your bike. Setting the correct fork oil level is a snap with this fully adjustable gauge. The adjustable aluminum level plate can be set from 0 to 295mm. The oil reservoir has single milliliter markings up to 60ml.

Being able to accurately tune your forks by adjusting the oil level can make them better resist brake dive or bottoming. Oil level should be thought of as a fine tuning method to make your choice of spring rate work perfectly for your bike.


Cable Luber

Keep your cables lubed up and working freely. This tool is used to inject lubricant into cable housing. Clamps over housing and wire allowing an aerosol can to be connected. Once lube runs out the far end, the cable is lubricated.


New! 031017

Motion Pro Cable Luber V3

Motion Pro Cable Luber V3

A new type of cable luber from the tool people at Motion Pro. Designed to seal completely around the cable housing and stop all those messy leaks. Because the unit is closed and sealed before pumping the lube down the cable, your cable gets more lube! A lubed cable is a happy cable!

Keeps things clean and simple. No more lube running down your arm. Works on most cables with a 4mm to 8mm OD housing.


Dri Slide Cable Lubricant

Goes on wet but evaporates to leave a dry moly film. This unique dry film won't attract dirt or dust, is highly resistant to water, and prevents rust and corrosion. It is the perfect lubricant to use on brake and clutch cables. Includes applicator needle to get into cables, locks and anything else that needs dry lubrication.


Tire Bead Breaker

Changing tubes or tires without the right tools can be a real chore. Don't fight your snug beads any longer, use this 27" long tool that opens to 7-3/4" to provide the leverage you need to easily break your tire bead. Constructed from heavy-duty steel with comfortable no-slip grips, this tool makes the job a snap.


8-1/2 inch Tire Irons

Set of Two

Here is a set of 'trail size' tire irons. At 8-1/2 inches long they are small enough to fit in a fender bag with your spare tube.


Warp 9 Valve Stem Puller Tool

This ultra-cool little tool is used to pull the valve stem through the hole on motorcycle rims saving your finger tips when changing tires, fixing flats or any time the tube has to come out of the rim. It threads inside the valve stem making it easier to pull through the rim hole. You can use it as a valve stem puller, valve core removal tool or a tire deflator.

Handle is CNC machined and has a threaded hole in each end, one to hold and protect the threaded end of the tool and one for a spare valve core (not included). Anodized blue for good looks and corrosion resistance.


Mini-Morph Pump

The Mini-Morph is actually a bicycle pump, but is probably the best compact pump we have found for adventure / dual-sport riding. It has a fold-out foot and handle as well as a 4 inch hose so you can set it on the ground to pump. At only 10" long, it is small enough to pack anywhere.


MotoPressor Pocket Pump

The MotoPressor is a compact pump unit that weighs only 1.5 pounds and fits in the palm of your hand. MotoPressor very cleverly omitted the plastic housing you find on other pumps. This makes it smaller and easier to carry with you. Included is a 25 inch long inflator hose, with a hands-free lock-down delivery valve. You also get a SAE power cord that attaches to your battery and stays there. The Pocket Pump has an 8.5 foot cord to give your air supply plenty of reach. All this packs into a heavy duty neoprene pouch.

MotoPressor will pump the front or rear tire of your motorcycle from flat to approximately 30 psi in 2 minutes and is capable of pumping to over 100 psi. Use it to inflate tires, top off your air shocks, air forks, inflate air beds or anything else.

If you will use the MotoPressor on a CANbus BMW please click on the More Information button.

! Do not use this pump in a standard BMW accessory outlet, unless it is wired directly to the battery and bypasses the motorcycle's electrical CANbus system. The CANbus monitors and limits the amperage of the accessory outlet. When you plug the MotoPressor into a CANbus equipped accessory outlet the CANbus will automatically shut off the circuit and the MotoPressor will stop working. It is not the fault of the Motopressor.

If you have a CANbus equipped bike and you are not SURE about using the accessory outlet, use the alligator clips to get power from your battery or better still connect the supplied SAE terminal connectors to your battery and get power from there.



click to enlarge

These simple add-ons stretch and grip to the finger of your favorite glove using Grrprr technology. Users can operate a phone or any touch screen device and never have to remove their nice warm gloves.

A special conductive material enables you to interact with capacitive touch screens quickly and easily. There are two ThumbDogs to each package so you can double digit type just like you would in the real world. You can also put one on your index finger to operate your GPS.


Tow Strap

When you need the Buddy Tow, it's priceless! This is the only tow strap made expressly for motorcycles and ATVs. Tucked away in its carrying case attached to you handlebar or crossbar, the Buddy Tow is always ready when you need it.

This simple accessory - 12' of 1785 lb. test strength 1" webbing in a handy carry pouch should be a standard part of every rider's kit. Whether used to tie your bike down in a truck or ferry boat's car deck, tow a friend into the nearest gas supply or hold down a tent the Buddy Tow has endless uses.


Tiedown Strap Rings

(Made in USA)
  • Constructed of stainless steel and is break-rated at 2,000 lbs. Far exceeds all other tie-down hooks or carabineers on the market
  • Attach tie-downs almost anywhere there is an 8mm bolt
  • Originally designed to give you a place to attach tie-downs to the triple clamp of a dirt bike but there are many other uses, such as bungee attachment points or in the bed of a truck or trailer, behind passenger peg bolts on a street bike or anywhere you can put a bolt.
  • Eye is large enough to accept the large size 3/8 in. coated tie-down hooks as well as carabineers
  • Packaged in pairs


Tie-Down Handlebar Clamps

These clever tie-down clamps give you an instant anchor point for tie-down straps using your hand grips.

  • Oval opening for single or double tie-down hooks
  • Clamps securely to any 7/8" handle bar grips
  • Machined from forged aluminum
  • Sold in pairs


Stash Box Locking License Plate Storage

The Stash Box is a weather resistant storage box that mounts between the motorcycle and the license plate. It is ideally suited to storing the vehicle registration and other small objects while remaining unobtrusive. The Stash Box has features that provide benefits over other motorcycle storage devices i.e., low cost, concealed mounting location, lockable, vehicle styling is unaffected, and easy accessibility.

  • Sized to work with all standard size license plates as well as the current Wisconsin and Ohio plates
  • External Dimensions: 7" x 4" x 1" plus 1" on the width for the lock
  • Made from molded polypropylene
  • Includes all mounting hardware, retention pouch for paper documents, foam insert, lock and two keys


New! 051717

Moto Caddy Document Holder

(Made in USA)
Moto Caddy Document Holder
Moto Caddy Document Holder

The perfect document holder where you can keep your registration and insurance papers tucked up and out of the way in a water-resistant container. Just zip-tie it to you bike wherever you like and off you go. The Moto Caddy is really two containers in one - the longer side is 4 inches long, good for your paperwork, while the other end has a 1 inch depth, perfect for some emergency coins!



Super Siphon

Super Siphon

This is a new and improved Super Siphon with a longer and larger hose (1/2" x 6´) makes it even easier to transfer fuel from one bike to another! Simply shake the hose to prime it and get fuel moving. With 6 feet of hose it is no problem to reach whatever needs a bit of your gas. The hose is resistant to gasoline and any other hazardous chemicals. Roll it up and stuff it in your bag and you will be very happy when you need it. And need it you will one day.


Snapjack Portable Jack

The Snapjack is an easy to use, portable, sturdy jack for chain lubricating, adjustment and chain drive maintenance. Also simplifies cleaning. It can lift the rear tire up to 1/2" to allow the tire to spin freely. Includes front brake locking strap and handy carrying bag.


Deluxe Folding Saw

A must have when blazing new or old trails!

  • Soft rubber handle
  • Thumb latch release for safety
  • 8" blade, 9" folded length
  • Steel frame


Smart Caps

Ride-On offers riders a first-class Tire Pressure Monitoring System known as an LED Smart Cap.

A blinking red light on the Smart Cap indicates a loss of 4 PSI or more. Has a 3 year battery life.

If you purchase a 2-pack motorcycle pack you will enjoy FREE Ride-On LED Smart Cap Roadside Assistance (for public roads only). You will find detailed information on this FREE service on Ride-On's website. Click here to read more from their website.


Tirepro Digital Tire Gauge

  • Large display, readings are shown to 0.1 psi
  • Kpa and Kg-cm2 scales also provided
  • Reads up to 99 psi
  • Ergonomic shape fits nicely in your hand


Helmet Lok


Small and compact enough to fit in your pocket, jacket or on our belt loop, HelmetLok is designed to lock your helmet to any bike using the handlebar or frame as an anchor point.

Don’t be weighed down carrying your helmet around anymore. Just use the simple to operate, carabineer-style HelmetLok and you can secure your helmet using the convenient outward opening mechanism. The combination can be reset to the number of your choice. Enjoy the security and freedom of HelmetLok.



Clutch Holding Tool

clutch tool
Made from medium carbon steel with hardened jaws. It feature spanner pins and the jaws open up to 5" wide. It's ideal for holding clutch hubs, flywheels, gears, sprockets, etc. From Motion Pro


Trimax Rotor⁄Disk Lock

This lock is a must have for any rider. Features a 10mm hardened steel pin that will resist any attack.

Comes with carry pouch and a disc lock reminder cable. Includes three keys, one with a mini flashlight.


Cycle Wipes

Cycle Wipes are pre-moistened and pre-folded towelettes made with a special non-woven "Dirt-Grabbing Mesh Fabric," which is a fancy way to say that they are soft, gentle, durable, and a lot safer than that old rag or paper towel.

Their formula contains no harmful ammonia and is specifically formulated for helmet face shields.

Didn't find what you are looking for?
We have millions of parts and accessories not listed on our site available from our vendors.