We will be leaving the office slightly earlier than usual this Friday 5/24 at 2pm (Pacific Time) and will be back in action on Tuesday 5/28 at 9:30am. We are taking a little break to enjoy some quality time with our families and to celebrate the Memorial Day weekend.
A pair of stage 2 intake and exhaust 'drop-in' camshafts. Great mid-range and top-end increase. Uses stock valve springs. Modifying the airbox and rejetting will be required to realize power improvements with these cams. These are new billet cams - No core return required!
This gasket seals the joint between the head pipe and Exhaust port. These gaskets are designed to crush a little bit to tightly seal where the pipe fits to the head. Get a fresh one now and avoid having an exhaust leak after you install your new exhaust.
A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing due to weathering or chemicals. Anti-Seize assures easier disassembly. Temperature range: -60°F to 1600°F (-50°C to 870°C). Salt, corrosion and moisture resistant – ideal for marine use. Meets Mil Spec #907E.
The Total Tune-Up Kit. All the parts you need to do a complete tune-up on your beloved beast.
High quality bore kit that shows substantial power gains throughout the RPM range. 63mm piston. 10.5:1 compression ratio allows use of premium pump gas. Complete kit includes: cylinder, piston, ring set, pin, clips and gaskets.
This set includes the head, base, and upper end gaskets. They are designed for piston replacement. Includes all gaskets and seals from base gasket up.
Dual stage foam: 2 different pore sizes create more trapping area for even the smallest dust particles.
Flame laminated foam: Both "Stages" are not glued but heat sealed to provide maximum air flow.
Light color foam makes it easier to see where the filter oil has covered and where it has not.
K&N Replacement filters are designed for all street legal and off road motorcycles and ATVs to O.E.M. (manufacturers) size specifications and fit into your original OEM air box without modification of jet changes. Due to design and unique high flow characteristics, K&N filters allow engines to breathe free and produce optimum horsepower. Under most conditions K&N air filters never need to be replaced. With proper cleaning and care, K&N air filters will last the life of your engine.
The new DG RST (Reduced Sound Technology) muffler is the quietest DG muffler and is designed especially for dual-sport machines (Just 84db @ 3200 RPM). A new baffle design dissipates sound waves reducing noise output in a very efficient manner. This new design also stretches out the time between muffler repacks. Included is a Stainless Steel mid-pipe, USFS Approved Spark Arrestor and a new Aluminum end cap.
No Toil air filter to replace the stock unit. Fits the stock airbox using the standard guide and frame. It requires foam filter oil to properly trap dirt particles. Don't forget the Evolution Air Filter Oil kit from No Toil.
Here's a UNI dual layer foam air filter element for the KLX230. Needs to be treated with air filter oil like any other foam filter.
Deltran quick-connect plug with LCD voltmeter display. Plug this into your Battery Tender, or any SAE cable, for an LCD display of the battery voltage. Three LED lights indicate the state of charge as well.
Genuine Keihin spring, washer, and oring for the fuel screw of FCR and FCR MX carbs.
Just the parts…
Fuel screw spring, washer, o-ring (fuel screw not included)
K&L® shims exceed the maximum of the Apparent Rockwell Hardness "C" scale. Shims average 47.0 compared to the 46.0 maximum.
These kits fit multiple brands and models, please verify correct size for your model before purchase.
13mm diameter - Includes two valve shims of each size 2.30, 2.40, 2.50, 2.55, 2.60, 2.70, 2.80, 2.90, 3.00 and 3.10. In a shim box.
20 shims in total. From K&L.
KAWASAKI
The EVO R series draws on our rich heritage of making power. Offered for various off road MX and sport ATV models, the EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.
Muffler has superficial marks on the inside, not visible when mounted. Never been installed or used, scratches happened in shipping. Sold as is.
When designing the PowerCore 4 HEX, they looked at their top of the line products to deliver race-inspired performance at an economical price. The end result is a quality muffler with improved torque, increased horsepower and rugged durability all at a price that won't break the bank.
Features:
This kit of O.E. Suzuki O-rings replaces your leaky, weepy, and brittle O-rings that fit between your DR's oil cooler lines. You get 4 O-rings in this kit to replace both feed and return line O-rings.
If you're noticing oil leaking or creeping around your oil cooler, oil cooler lines, or engine, you may have one or more failed / failing oil cooler line O-rings. Replace them now before they completely fail and you run your motor dry of the precious oil it needs to operate properly.
The EVO R series draws on our rich heritage of making power. Offered for various off road MX and sport ATV models, the EVO R is a tried-and-true series that will save weight, add noticeable performance gains and sound tremendously better than stock.
FunnelWeb ProLine Filter Highlights:
Like all FunnelWeb filters, the ProLine Filter features profile cut, single layer, single density foam that doubles the external surface area of the filter without increasing the original filter size. The ProLine Filter traps dirt, dust, sand and mud over a larger area on its outer surface, ensuring optimal air flow is maintained for maximized engine performance and reliability.
The single layer, single density polyurethane foam has the added advantage of being easy to clean and the ability to maintain its original shape after numerous washes. Overall, compared with conventional foam filters, FunnelWeb offers more protection from dirt ingestion, has longer service intervals and maintains high airflow rates when dirty.
Plenty of fuel capacity for those long rides. This top quality Acerbis fuel tank will get you there and back again.
High quality sealed bearings by Moose Racing. Includes dust seals.
New replacement side panels specifically made for TW200.
Sold in pairs, designed to be used with Maier USA Rear Fender.
Precision tolerances – The tightest in the industry. Ultra-lightweight, for reduced unsprung mass.
Straight rate springs will give better control in the rough stuff. Sold in pairs.
Race Tech has developed these fork springs specifically for the heavier weight of the KLR650.
Sold in pairs.
Not for 2014-2018 New Edition
A CNC machined fork brace to stiffen up the notoriously wimpy front end on the DR. Have more confidence in your front end on or off the pavement.
Split design means that installation takes minutes without having to remove the forks. Available in a black anodized finish.
Cycle Racks Bag Supports can used for many different Cycle Racks and can be used on either the front or rear rack.
When they developed these, they wanted a functional, yet "Easy On- Easy Off application. The pig tail hook goes up, over and underneath the bar of the rack, they can also be used upside down on the rear rack as side boards. To install them, wing them out, slide them in place and then wing them back down. Simply reverse the process to remove them.
Rok-Straps are supplied to secure them in place. They are pre-drilled to accept the pattern of the Roto-Pax Pack Mount (sold separately) so you can carry fuel or attach them to your own bags.
They are sold together in a set of one right support and one left support.
COLOR: Black
Ditch the stock ugly plastic sub-fender and install a B&B Off Road Engineering License Plate Holder. Comes with an LED light to keep the license plate lit up.
Sold individually.
Enduro Mirror 4"
The Enduro Kit is a great option for your street legal dirtbike if you fold away your mirrors often. The longer stem helps the reflector fold behind the headlight and gives good visibility when extended.
Their Doubletake Arm 3.5" is perfect for aggressive riders- long enough to see, but small enough to tuck away.
The new Doubletake ball is oversized, and high quality nitrile rubber surrounds an aluminum base that won't degrade under extended compression.
The Doubletake Base Kit includes bolts to thread into every application (even reverse thread Yamaha's), without adapters.
As each E.B.L. is built custom to each rider’s preference, Cogent offers rebound damping control and spring preload adjustability to maximize your performance wherever your adventures may lead!
However you may use your TW200, the Cogent Dynamics E.B.L. ("Easy Bonus Loop") shock is the principal improvement to take your bike and its capabilities to the next level. Whether you use your TW200 as a camp-site transit, hunting mule, trail toy or even daily driver, your custom E.B.L. shock will provide the performance and reliability you need!
The E.B.L. shock is a high quality, reliable suspension component with:
*Spring color may vary due to specification requirement and availability.
The 244 Series Dual Sport street and trail tires were designed to be equally at home on dirt or pavement. Great value.
Give your DRZ that factory prepped look and protect your frame.
These frame guards from industry leaders Works Connection are CNC cut and formed from aircraft grade 5052 aluminum. These not only protect your frame from scuff and rub marks from your boots, but also give you a flatter surface for better grip and control with your lower legs. All the necessary mounting hardware is included making these a very simple bolt-on installation.
Allows your bike to breathe much better giving you better response and performance.
High quality fork boots. Sold in Pairs.
Choose from; black, red, royal blue, yellow, or light blue.
From Shinko Tires, the 705 Series are DOT approved Dual Sport tires designed for 75% street and 25% trail riding. An versatile tread pattern provides excellent wet and dry weather adhesion and the compound resists tearing while riding off-road. "R" in size denotes a radial tire.
All of these options are for complete systems, including head pipe and muffler. The S option is for a Silencer only while the S/A is for a system with a Spark Arrestor.
The latest version of the Powercore 4 design incorporates a hi-flow core which mas more surface area to absorb more sound while flowing more exhaust. The silencer is constructed with an extruded aluminum canister is MIG/TIG welded and has space age internal packing. This system is lighter, stronger and provides more power than stock exhausts. The pipe is a stainless steel unit for strength and weight savings.
Powercore 4 S/A has a US Foresty approved, maintenance free, stainless steel spark arrestor screen to be sure you are safe and legal in the woods.
Replacement Cleats for use with Fastway Pegs.
Get better range from your XR650L by adding a Clarke 4.7 gallon fuel tank. Cannot use stock shrouds.
Available in Natural, White, Black, and Red. Natural color is recommended if you wish to easily see the fuel level in the tank. Includes cap, uses stock petcock.
50mm step width provides better grip and control
This is a great Dual-Sport tire from Dunlop. Designed for the true 50/50 rider. An Adventure product for the price-conscious customer. Full tread depth pattern designed for rigorous off-road use yields excellent traction on everything from hard-packed fire roads to soft single-track trails. Versatile tire performance allows riders to travel on the street and venture off-road. A tire equipped to go anywhere, the D605 is a value option for the all-around rider. DOT approved.
Order up your new levers here! If you keep breaking levers, you might want to think about a set of hand guards to protect them in case of a fall.
Stock bore replacement pistons from Wiseco. You have your choice of the standard compression ratio of 12.2:1, or a high-compression ratio of 13.5:1.
This high-compression kit will run perfectly with standard pump Premium.
Kits include piston, rings, wrist pin and circlips.
This is one of the few plastic parts on the DR650 that can ruin your day if it breaks or fails on you. This gear helps drive the oil pump to circulate oil throughout your entire motor, without it, your motor will fail entirely. The idler gear is not known for being a common failure point in the DR650 motor but, it has failed riders in the past. Usually in the form of a broken gear or stripped teeth. Upon inspection, look for any kind of crack, chipped or missing teeth on the gear. It is not a complicated repair to swap an old gear for a new one, as the best time to replace it is when you've opened up the clutch side case cover for another repair i.e., (NSU screws or clutch hub bushing replacements). This is an O.E. Suzuki part.
Features:
Puig Visor Clip-On
This auxiliary light harness is specifically built for the DR650 using the highest quality materials and components. Wire lengths, component locations, and end terminals are all predetermined and assembled for you. No electrical expertise needed! The relay is wired directly to the battery and Posi-Tap connectors are used to tap in to the existing headlight high beam circuit.
This eliminates the need for a separate switch to operate your auxiliary lights. When your high beam is on, your auxiliary lights will be too. Back to low beam and those high-powered beams will be off so you don't bother oncoming vehicles. There's also an in-line fuse holder for safety and peace of mind. A simple one page instruction sheet is included.
Galfer USA produces several different brake pad compounds for all types of riding styles and uses. With over 60 years of friction material production and research, they have learned that one compound doesn’t always do the trick across the board. If you are just looking for an OEM brake pad replacement or a high performance race brake pad, they have you covered!
Set includes front and rear brake pads.
OEM replacement upgrade. Great feel, long lasting, and very little rotor wear with this durable compound. Compound applications for almost every need, including off road, street, touring, enduro, dual sport and more. Precision made in our Galfer factory in Spain.
Our most popular compound! This compound is the work horse of the Galfer family and is a great OEM upgrade for the everyday rider.
A dual-rate fork spring for the early KLR650. These springs start with a .40 kg/mm winding and after approximately 20% of the stroke, stiffen up to .60 kg/mm for the remainder of the travel. A very nice improvement over the stock springs which are .40 kg/mm for the entire travel.
Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series DRZ400S/KLX400S rear rack which measures 10 inches wide and 12 inches long.
Easy to Install
These Cogent Drop-in Dynamic Cartridges will vastly improve both the compression and rebound damping of your stock forks. No disassembly of your forks, no drilling of damper rods. Just change the oil to 5w and install the DDCs under the springs and hit the trails.
Stiffer fork springs are required to realize the full benefits of the DDCs. .42 kg/mm springs are the springs recommended for just about anybody out there. Please call if you have any further questions.
The DDCs are not recommended for use with progressive springs.
The DDC Install/Removal Tool which makes installation that much easier.
Sold individually.
The Adventure Kit is perfect for adventure and touring bikes where the mirrors are kept up most of the time. This mirror offers the widest field of view, and is ideal for riding paved and dirt roads. The 6 inch arm is a little longer than anything else on the market, for great visibility on loaded bikes.
The new Doubletake ball is oversized, and high quality nitrile rubber surrounds an aluminum base that won't degrade under extended compression.
The Doubletake Base Kit includes bolts to thread into every application (even reverse thread Yamaha's), without adapters.
ADV 6" Arm Mirror
Kit Includes:
Includes all necessary o-rings and diaphragms
The Revelstoke is Giant Loop’s crossover roll-top dry bag that works on multiple vehicle types due to its versatile small rectangular shape that mounts to virtually any motorcycle, snowmobile, snowbike, UTV, or ATV for quick and easy access to gear.
With its 100% waterproof, mudproof, dustproof, and snowproof design, the Revelstoke delivers 16 liters of storage in a slim, trim profile. Ideal for carrying trail essentials such as extra layers, emergency supplies, snacks, tools, and other small items.
Fully encloses the chain to guide it onto the rear sprocket. Stainless steel hardware, anodized aluminum plate, and plastic buffer for low friction and noise. Saves expensive engine cases.
Universal off-road front fender. Must be drilled to fit your mounting bolt pattern.
The complete shock upgrade kit - a shock spring of your choice, Race Tech Gold Valve kit, detailed instructions and a bottle of quality shock oil to complete the job. Everything you need to transform your mushy stock shock into suspension that really works.
Recommended rates:
New wider seat to help keep comfortable on that long commute or dual sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike.
Available as a Foam and Cover Kit for OEM pan. It DOES NOT include the pan.
| Width: | 9.5" (241mm) |
| Height: | Same as OEM |
Planning a motorcycle trip can be hard work. Butler G1 Maps highlight the best paved motorcycle rides in the country so you don’t have to guess which roads are good. Their dedicated team rides and rates every road you see on the water-proof maps, hundreds of thousands of miles so far. Their easy to read rating system clearly indicates the most dramatic and scenic stretches and are accompanied by detailed inset boxes, written descriptions, elevation profiles and whole bunch of useful information to help you plan your journey.
DP brakes are available in two different compounds for the DR. The standard Sintered metal material pads provide powerful braking with industry-high HH+ friction rating that is equally adept in wet or dry conditions. They have a quick break-in period and excellent initial response. An oxide-based ceramic material on the rear of the backing plate keeps heat away from the caliper piston and fluid in extreme conditions giving a fade-free performance in even the harshest conditions.
The material in the Special Pads was developed by pro riders in the MX, Supercross, Enduro and Off-Road world where performance and good durability are essential.
Includes front and rear brake pads.
Solid reliability and easy installation. This manual tensioner is a good upgrade for any modified motor, especially if it is ridden hard.
A new gasket is included.
Here is another great upgrade for the TW200 or the VanVan front tire.
Universal 'old school' trials type tread pattern. A versatile performer with a tough nylon carcass and raised dimpled knobs that work well in a variety of terrain.
Tire size is 4.00-18 (64P load / speed rating)
Low friction 'triple lip' seal design. Oil seals last 3-4 times longer that OEM seals. Kit includes 2 Fork Seals and 2 Dust Wipers.
Complete chain and sprocket replacement packages.
Keep your hands and controls protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Heat treated aluminum backbones with two mounting points of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors, available in multiple colors, provide protection for your hands from the wind and brush. Ride longer, more comfortably with Barkbusters VPS lever and wind protection handguards
Features:
What's in the box:
Not recommended for Africa Twin, T7, Himalayan, or V-Strom. Please see specific listings for those models.
NOTE: tapered kit will not fit Renthal Twin Wall or Barkbusters VSBar
High quality steel rear sprockets from 39 to 53 teeth.
Sprocket color may differ depending on size.
The PowerBomb header promotes better flow by allowing a small expansion of the exhaust gasses. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels. Includes clamp-on mounts for the stock heat shield. We recommend Anti-Seize on exhaust fasteners.
Quick release one-piece clamps that saves space. These are great for fuel lines, controlling wires, and can be used many times.
Comes with 4 each of 8mm, 9mm 10mm, and 12mm.
No special tools needed, from Helix Racing.
Years in development, Yenkro Adventure Rally Fairings have been designed from the ground up to withstand even the most unforgiving terrain and now the gen 2 kit takes it to the next level. Battle-tested in conditions that only the Australian outback can muster, this fairing is a must for adventure riders from all corners of the globe.
Side Panels are Optional and Sold Separate, they work with Acerbis 6.6 gallon (25L) tank only. Available in either black or white.
Can be purchased with or without side panels.
Standard kit includes:
The standard lighting kit is a pair of hella 60mm projectors, one for high and one for low, these are 60w halogens and are DOT and ADR approved.
DG Performance exhausts help your engine breathe better, resulting in increased throttle response, power and torque.
The V2 Series Slip-On muffler features:
Standard sound level is approximately 98 db and quiet core inserts are available separately.
This Lightweight Slip-On weighs approximately 5.5 lbs and bolts directly to the stock headpipe.
It is equipped with a US Forest Service-approved spark arrestor.
PSR has a new shark fin rear rotor protector for the big XR and XRL. CNC machined from forged aluminum and then anodized gun metal in color. This unit bolts to the stock caliper bracket.
Heavy duty shock bumper. The stock bumper is prone to disintegrating with age. If you are re-valving your shock it's a good idea to be sure the bumper is in good shape.
This CNC cap will replace the stock gas cap on the stock tank. You do need some parts from the stock cap, so don't throw it away yet! It is not difficult and this kit includes the additional hardware required. Also included is a vent tube with a matching cap.
For use on STOCK TANK ONLY! This is NOT a locking cap.
Does not fit California model DR650
Inexpensive way of getting the factory look. Adds 1/2" of width to any standard foot peg. These will give you a much more stable platform when standing on the pegs.
Sold in pairs.
This adapter set is required to fit an aftermarket spring to the Vstrom shock
Adapters are required for this spring
Ride in warm temperatures a lot? Worried about your motor oil just getting too hot? The Trail Tech Universal Fan Kit mounts up to the backside of the DR's oil cooler to draw cool air across it and keep those oil temps down. An electronic temperature sensor mounts to the fan, no need to cut any fluid lines, and automatically turns the fan on when needed to keep the temperature in the optimum range.
The activation sensor can be set wherever you like to keep the temperature right where you want it. Backlit for easy viewing anytime it also includes a volt meter.
Kit Contents
Lite:
Want an amazing increase in throttle response? More power over a much wider range? The Mikuni TM40 does all of that plus runs smoother at lower RPMs and pulls taller gearing with ease.
Our complete kit comes with alloy adapter rings bonded to the genuine TM40 carburetor body for a firm reliable fit in the stock air boots. We also include new low friction cables, an extended fuel screw, complete instructions along with a wide range of extra jetting for fine tuning. It even has a vacuum port for the stock fuel petcock.
The carburetor comes pre-jetted for the typical mods: performance pipe and modified air box, or we can set it up for your particular bike before we ship it out.
Instead of the tough to reach choke knob, all TM40's come with a remote choke and bracket. This makes it easier to reach the knob, especially if you have an oversize tank.
The X-Factory Handguards from Acerbis feature a steel bar wrapped with an injection molded Nylon composite. A replaceable dual injected polypropylene shield mounts to the bar offering insurmountable protection from roost, debris, and extreme conditions.
A universal mount kit is included that allows for mounting on either 7/8" or 1 1/8" handlebars.
Will not fit XT250 with stock handlebars (oversize bars ok). Recommend Acerbis Rally Pro X-Strong to clear master cylinder.
Weight:
360 grams/pair or
180 grams/each
Fitment Notes: If you have a hardware kit listed below see special fitting notes as additional parts may be required
BHG-010 Requires two additional M6x40mm countersunk bolts
BHG-032 R1200GS/A requires two additional M8x55mm countersunk bolts
BHG-045 G650GS requires two additional M6x65mm countersunk bolts
BHG-050 Will not fit
BHG-051 Requires two additional M6x50mm countersunk bolts
BHG-059 Tiger XC, XCA & XCX (all ’15 on) use M6x45mm bolt from BHG-059 kit
BHG-075 Will not fit
BHG-079 Will not fit
Changing sprockets for gearing can wear out the lock washer after a few uses. This is an OEM replacement.
If your aftermarket exhaust is missing heat shield mounting points, this is the easy fix you’ve been waiting for.
Includes one stainless steel mounting bracket with M6 threaded nut, and one stainless steel hose clamp.
Fits exhaust approximately 1.1inch-2inch diameter. Trimming may be required for smaller diameter exhausts.
You want a lighter replacement for your heavy steel stock tank? Don't need the extended range (or bulk) of a big tank? The 3.7 gallon tank from Clarke might be just right. It's almost 5 lbs lighter and holds close to 1/2 gallon more fuel than stock to increase your range by about 20 miles. Fits with your stock petcock, Pingel or Raptor petcock.
Each 10 watt Solstice Solo produces 900 lumens, which is roughly equal to a 50 watt halogen bulb. These are one of the brightest LED off road lamps on the market. The rugged and compact 2” x 2” square die-cast aluminum housing makes mounting easy. The Solstice Solo also features a 4 sided channel design that allows you to interlink it on all four sides with other Solstice Solo pods. Includes stainless steel mounting bracket and waterproof connection. Choose narrow, medium, wide or elliptical light beam pattern. Our favorite is the Elliptical pattern which is wide and flat, putting most of the light where you need it the most.
Sold each.
This lock is a must have for any rider. Features a 10mm hardened steel pin that will resist any attack.
Comes with carry pouch and a disc lock reminder cable. Includes three keys, one with a mini flashlight.
For all years.
High-quality DID chain and steel sprockets for 2002 & later TTR125s.
JT Sprockets is the world's leading manufacturer of aftermarket sprockets, constantly raising the industry's standards for quality and service. JT Sprockets are the only sprocket manufacturer using the ultra-durable high carbon C49 steel for rear sprockets.
Direct replacement cables for your T-Dub. OEM or high-quality replacements will keep you on the road or trail. Pay attention to the model year for correct fitment, then select the cable type: Throttle, Clutch or Speedo, they're all here.
Sintered Pads from EBC provide great performance in all conditions yet still give you long pad life. Front pads are double H rated for maximum breaking. Rear pads offer maximum durability and excellent braking performance.
This is a genuine Suzuki part. We recommend installing a countershaft seal retainer to prevent the countershaft seal from popping out while riding.
New wider seat to help keep comfortable on that long commute or dual sport ride. The added width and foam density will help keep the seat from being an item to stop you from going on that ride or enjoying the bike.
The new updated 2.0 version has a sleeker shape and a better fit in the tank area.
Complete Seats come assembled on an aftermarket pan and ready to ride.
| Width: | 9 1/8" (232mm) |
| Height: | 1" (25mm) Lower than stock |
Reproductions of the original DR650 factory turn signals. Save a bundle compared to the $70+ each cost of the OEM signals. The wire pigtails plug directly into the factory harness. No cutting or splicing necessary. Choose original style amber lens or clear lens with amber bulb.
