Many suppliers are experiencing HUGE increases in demand and supply chain delays.  We appreciate your patience. The quickest way to get your item is to place your order now which guarantees your place in line.

KLX140G(RF)

  • Full-size wheels (21F, 18R) and 12.4-inch ground clearance
Chain Size:        Front Sprocket:        Rear Sprocket:        Front Tire:        Rear Tire:        Spark Plug:
428x134 13T 57T 90/100-21 (2.75-21)     110/90-18 (4.10-18)     CR7HSA

Featured Products

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Exclusive

T-Shirt, ProCycle Adventure

Universal fit. May require additional adjustment or modification.

Our latest casual t-shirt with a classic ProCycle Logo on the front and a topo map of our favorite local riding spot on the back.  High quality soft t-shirt perfect for everyday wear.

T-Shirt Specs:

  • Retail fit
  • Tear-away label
  • Side seamed
  • Shoulder taping
  • Black Heather: 4.2-ounce, 90/10 Airlume combed and ring spun cotton/poly, 32 singles
  • Heather True Royal 52/48 Airlume combed and ring spun cotton/poly
$21.95
Made in USA

ProCycle Gift Card

Universal fit. May require additional adjustment or modification.

Not sure what to get the adventure/ dualsport rider in your life? 

How about a ProCycle Gift Card!

Load as much as you would like in $25 increments.  This is a digital gift card, we will send you the information and redemption code via email once the order is processed.

*please allow 1-2 business days after the order is placed to receive the email containing the details and redemption code.

**If you would like a physical certificate to give as a gift instead of the digital code, choose USPS First Class Domestic for shipping at checkout, otherwise please choose curbside pickup and we will email you the redemption code and instructions for no shipping cost.

$25.00

Engine

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Big Bore Kit, 170cc BBR

KLX140G(RF) '17 - '24

High quality bore kit that shows substantial power gains throughout the RPM range. 63mm piston. 10.5:1 compression ratio allows use of premium pump gas. Complete kit includes: cylinder, piston, ring set, pin, clips and gaskets.

  • Brand new high quality BBR aluminum cylinder
  • 10.5:1 compression ratio
  • 63mm piston
  • Includes cylinder, piston, pin, rings, and gaskets
$269.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Camshaft, Performance BBR

KLX140G(RF) '17 - '24

A brand new camshaft purpose built for the KLX140! The KLX140 is the ultimate trail bike. It just needs a little more power.

  • Adds 1+ hp to fully modified motor (170cc Big Bore kit)
  • Makes more aggressive race-style of power
  • Bike still starts easily and idles smooth
  • Same camshaft as used by the BBR Race Team
  • No exchange required
  • 92 octane ok

Note: The BBR KLX140 Performance Camshaft installs the same as the OEM camshaft (valve clearance IN: .002"-.003" / EX: .004"-.006"). We recommend you purchase an OEM Kawasaki KLX140 Service Manual to assist you when installing this camshaft.

$178.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Valve Shim Starter Set

Universal fit. May require additional adjustment or modification.

K&L® shims exceed the maximum of the Apparent Rockwell Hardness "C" scale. Shims average 47.0 compared to the 46.0 maximum.

This kit fits KLR650 87-18 as well as other brands and models , please verify correct size for your model before purchase.

29mm diameter - Includes two valve shims of each size 2.30, 2.40, 2.50, 2.55, 2.60, 2.70, 2.80, 2.90, 3.00 and 3.10.  In a shim box.

20 shims in total. From K&L.

BMW / KAWASAKI / YAMAHA

$219.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Valve Shim Starter Set

Universal fit. May require additional adjustment or modification.

K&L® shims exceed the maximum of the Apparent Rockwell Hardness "C" scale. Shims average 47.0 compared to the 46.0 maximum.

These kits fit multiple brands and models, please verify correct size for your model before purchase.

13mm diameter - Includes two valve shims of each size 2.30, 2.40, 2.50, 2.55, 2.60, 2.70, 2.80, 2.90, 3.00 and 3.10.  In a shim box.

20 shims in total. From K&L.

KAWASAKI

Choose Shim Size
$219.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Gasket Set, Top End

KLX140G(RF) '17 - '24

This set includes the head, base, and upper end gaskets. They are designed for piston replacement. Includes all gaskets and seals from base gasket up.

$43.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Oil Filter, Value 10-Pack Hi-Flo

KLX140G(RF) '17 - '24

Providing unbeatable performance and exceptional value, Hi-Flo is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide.

 

$33.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Spark Plug Socket, Thin Wall

Universal fit. May require additional adjustment or modification.

Hardened chrome vanadium steel with built in rubber insert to hold spark plug steady.

Thin wall bi-hex sockets designed to access narrow spark plug holes.

Fits 3/8" square drive and hex drive, 14mm, 16mm, 18mm, 21mm.

Choose Size
$14.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Spark Plug, Standard NGK

KLX140G(RF) '17 - '24

Keep your motor running right with fresh spark plugs!

NGK is one of the world's largest manufacturer of spark plugs, whose products are used as original equipment (OE) on countless motorcycle and automobile models.

  • High-quality materials and superior construction for serious power and reliability
    • Pure alumina silicate ceramic insulator provides high strength and better heat transfer
    • Deep-seated copper core for a wider heat range
    • Nickel alloy tip for longer life
    • Trivalent metal plating provides superior anti-corrosion and anti-seizing properties
  • Choosing the right high-quality plugs prevents fouling from running too cool and preignition from running too hot
  • NGK plugs available for almost every application and riding style
Add Anti-Seize
$3.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Camshaft Installation Tool Kit

Universal fit. May require additional adjustment or modification.

Includes degree wheel, dial-gauge, multi-position stand, extension, 3-sizes of positive-piston stops, and a handsome wooden carrying case.

$199.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Clutch Holding Tool

Universal fit. May require additional adjustment or modification.

Made from medium carbon steel with hardened jaws. It features spanner pins and the jaws open up to 5" wide. It's ideal for holding clutch hubs, flywheels, gears, sprockets, etc. Made by Motion Pro.

$32.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Crank Case Separator Tool Set

Universal fit. May require additional adjustment or modification.

This tool is designed to separate vertically split crank case halves on two and four stroke engines. Adjustable arms allow it to be used on multiple bolt patterns found on a variety of makes and models of motorcycles. Industrial grade steel construction with black oxide finish for long service life. Comes with 8mm mounting bolts and 6mm adapters. Protective carrying case included.

$109.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Oil Filter Removal Tool, Motion Pro

Universal fit. May require additional adjustment or modification.

For easy removal of recessed oil filters.

Conical point screws pierces and grabs the metal end cap of the filter.

reduces potential damage to the engine cases.

NOT for use on re-usable oil filters.

$9.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Temperature Stickers

Universal fit. May require additional adjustment or modification.

A 3-pack of easy to apply strips measure the temperature of engine, suspension, and radiator components. Temperature range 146° to 248°

$14.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Thread Chasers

Universal fit. May require additional adjustment or modification.

Thread Chasers are designed to clean and re-cut damaged aluminum threads.

this kit contains the two sizes most common on metric motorcycles, M6x1.0 and M8x1.25.

Thread Chasers also remove dirt and metal shavings that become captured in thread grooves.

Uses 8mm or 10mm hex sockets, a Must for all tool kits.

$5.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Valve Clearance Feeler Gauge Set

Universal fit. May require additional adjustment or modification.
  • 26 straight blades
  • SAE and metric markings
  • Check for clearance on valves, ignition points etc.
  • Includes 26 blades varying in thickness from .0015"/.038 mm to .025"/.635 mm
$12.95

Fuel and Intake

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Jet Kit, DynoJet

KLX140G(RF) '17 - '24

Perfect for Dirt Bikes with a stock engine using the stock airbox, air filter, and pipes.

Stage 1 Jet Kits are engineered to improve throttle response and deliver approximately 5% more horsepower than stock.

These kits are fully adjustable to allow the use of well-designed aftermarket pipes and stock replacement air filters, like K&N.

$99.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Carburetor Repair Kit

KLX140G(RF) '17 - '21

This kit includes all necessary components to repair your carburetor.

O.E.M. jet sizes are included in the kit.

$34.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Washer, Spring, O-Ring, JD Jetting

Universal fit. May require additional adjustment or modification.

Genuine Keihin spring, washer, and oring for the fuel screw of FCR and FCR MX carbs.

Just the parts…
Fuel screw spring, washer, o-ring (fuel screw not included)

$8.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Air Filter, K&N

KLX140G(RF) '17 - '24

K&N Replacement filters are designed for all street legal and off road motorcycles and ATVs to O.E.M. (manufacturers) size specifications and fit into your original OEM air box without modification of jet changes. Due to design and unique high flow characteristics, K&N filters allow engines to breathe free and produce optimum horsepower. Under most conditions K&N air filters never need to be replaced. With proper cleaning and care, K&N air filters will last the life of your engine.

$89.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Air Filter, No Toil

KLX140G(RF) '17 - '24

Dual stage foam: 2 different pore sizes create more trapping area for even the smallest dust particles.

Flame laminated foam: Both "Stages" are not glued but heat sealed to provide maximum air flow.

Light color foam makes it easier to see where the filter oil has covered and where it has not.

Choose Filter
$30.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Air Filter, Twin Air

KLX140G(RF) '17 - '24

Twin Air Filter's patented design, high quality materials and superior construction deliver unbeatable performance and protection - and make Twin Air Filters the hands-down choice of more World and National Champions than all other filters combined.

An air filter is your engine's only protection against the elements, and your stock filter isn't up to the task. Replace it with a Twin Air- the number 1 filter system proven on motocross tracks around the world.

Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles-without restricting airflow

$35.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Air-Box Filtered Vents

Universal fit. May require additional adjustment or modification.

Sold in 6 packs

  • Compatible with many air filter boxes.  Easy to install by drilling 1’’ holes in airbox housing and snap fitting vents in.
  • May be cleaned and re-oiled
  • More air flow allows you to add more fuel to your intake mixture, increasing performance.
  • 1" Diameter
*Not legal for use on pollution controlled vehicles in the state of California.*
$14.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Clamps, Nylon Ratchet Style

Universal fit. May require additional adjustment or modification.

Quick release one-piece clamps that saves space. These are great for fuel lines, controlling wires, and can be used many times.

Comes with 4 each of 8mm, 9mm 10mm, and 12mm.

No special tools needed, from Helix Racing.

$9.95

Gas Tanks

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Gas Tank Grip Pads, TechSpec

Universal fit. May require additional adjustment or modification.

TechSpec’s Motorcycle Tank Grips were developed to improve body, bike control and increase riders comfort. Gripping your motorcycle between your knees or thighs improves overall control of your ride by better securing your body weight and seat position under the forces of braking, cornering and acceleration while also relieving pressure from your wrists, elbows, shoulders and lower back giving you increased control and a more comfortable, safer ride. Snake Skin is a thin, .125” medium durometer “rubber” material that offers a secure, comfortable grip, durable protection and a clean stock look.

This universal precut kit includes left and right tank grips. (8" X 3") Triangle

$29.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Gas Cap Tank Vent

Universal fit. May require additional adjustment or modification.

If you're like us, you hate the long floppy vent hose hanging off the cap of your aftermarket tank. This one-way vent cap replaces the long hose with a short one only about 2" long. It allows air into your tank but prevents fuel from sloshing out. Machined from billet alloy and anodized for good looks.

Thumbnail

  Not for stock fuel tanks!

$11.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Gas Cap, Acerbis Locking

Universal fit. May require additional adjustment or modification.

Security for your fuel tank. Includes 2 keys. Internally vented with a check valve that prevents spillage in case of a tip over.

Thumbnail

 Fits Acerbis, IMS and Safari tanks only.

$34.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Filter, 1/4" - 90° or Straight

Universal fit. May require additional adjustment or modification.

The small size and right angle hose barbs make this filter easier to fit into the small space between your fuel petcock and carburetor. Filter body is only 7/8" diameter. Straight filter is 2" long, 90 degree filter is only 1-5/8" long.

Choose Type
$24.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Filter, 5/16"

Universal fit. May require additional adjustment or modification.

This filter is meant for 5/16" fuel lines. Only 1/2" thick it is small enough to fit just about anywhere.

Choose Pack
$22.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Filter, Gas Tank

Universal fit. May require additional adjustment or modification.

Fuel supplies can be sketchy at times. This filter lives in your tank to trap dirt and debris as it is poured into the tank. Features a custom shaped adapter that fits securely under the gas cap, creating a leak-proof seal. If it stays out of your fuel, it can't get into the carburetor! Created by the filter experts at Twin Air, this filter fits IMS,  Acerbis and Safari brand gas tanks.

Choose Tank Type
$35.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Line Clamp Kit

Universal fit. May require additional adjustment or modification.

Ordering new fuel line? How about a set of fresh zinc plated clamps to go with it?

These will be sure your fuel line stays connected. A pack of 8 clamps in 2 sizes to fit most 1/4 or 5/16 fuel hose.

$5.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Fuel Line Reducer, 5/16" to 1/4"

Universal fit. May require additional adjustment or modification.

Hose reducer to go from 5/16" line down to 1/4" line. Many bikes have 5/16" carburetor spigots but most aftermarket petcocks are 1/4". This solve the problem of mismatched sizes. Solid brass construction. Can be used to route or repair fuel lines, oil lines or air lines. Barbed ends provide a secure fit.

$8.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Fuel Line, Premium

Universal fit. May require additional adjustment or modification.

30" lengths. Sizes shown are ID. All of these lines are stronger and more durable than vinyl fuel lines and are resistant to swelling, UV light, as well as hardening and cracking.

Choose Size & Type
$8.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Auxiliary Container Mount Extension, RotoPax

Universal fit. May require additional adjustment or modification.

Need to mount two containers? A water and a fuel? Two waters? Already have a RotoPax Mount for a single container? Get this extender to work in conjunction with a pack mount and that will be no problem! Single mount, two containers.

 

$34.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Auxiliary Container Mount, RotoPax

Universal fit. May require additional adjustment or modification.

RotoPax holder made to mount a single Fuel and/or Water container.

Need to mount two containers? A water and a fuel? Two waters? Get the extender which allows you to stack two containers no problem! Single mount, two containers

Add Extension Mount
$52.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Auxiliary Container Mount, RotoPax Deluxe

Universal fit. May require additional adjustment or modification.

RotoPax holder made to mount a single Fuel and/or Water container.

This unique design adds strength and provides extra tightening power.

Use with included base plate or remove plate to attach mount direct by bolting up through the bottom or down through the top.

$62.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Auxiliary Container, RotoPax 1 Gallon

Universal fit. May require additional adjustment or modification.

RotoPax are Rotational Molded - the process which produces indisputably superior products.

  • Thicker walls and stronger construction
  • Bright colors that are less prone to fading
  • Extra threads, thicker walls, and sure-seal gasket guarantee no leaks

Need to mount two containers? A water and a fuel? Two waters? Finally, you can stack multiple packs together! Use in conjunction with a pack mount. You will need to purchase the Single Mount as well as the Extender.

Choose Container
Add Container Mount
Add Extension Mount
$87.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Auxiliary Gas Tank, Acerbis

Universal fit. May require additional adjustment or modification.

Auxiliary fuel tanks mount to handlebars, forks, or rear racks.

  • Suitable for minis, trials bikes, full size bikes, and anywhere else a little extra fuel is needed.
  • Each tank includes a siphon kit that connects the tank to the main fuel tank and automatically siphons fuel while the bike is being ridden.
  • With this design, the auxiliary tank empties first, before the main tank.
  • Does not interfere with headlight, handguards, rear seat, etc.
Add Fuel Stabilizer
$112.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Super Siphon

Universal fit. May require additional adjustment or modification.

This Super Siphon has  a (1/2 inch x 6 foot) long hose, which makes it quite easy to transfer fuel from one bike to another! Simply, shake the hose to prime it and get fuel moving.  The hose is resistant to gasoline and any other hazardous chemicals. Roll it up, stuff it in your bag and you will be very happy whenever you need it.

$22.95

Body

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Windscreen, Dual Sport

Universal fit. May require additional adjustment or modification.

Windscreen attaches to your bike's handlebars. Fully adjustable mounting brackets. Includes 7/8' handlebar clamps.  14" tall & 10" wide.

Thumbnail

  Will not fit 1 1/8" oversize handlebars.

Choose Color
$129.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Windscreen, Visor Clip-On Puig

Universal fit. May require additional adjustment or modification.

Puig Visor Clip-On

  • Suitable for screens with thickness between 3-5mm
  • Multi-adjustable visor adaptable to Puig and OEM windscreens
  • Visor is mounted by clip-ons and does not need to be drilled to the windscreen
  • Visor sizes available include 90x230mm, 100x277mm and 102x325mm
$119.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Front Fender, Supermoto

Universal fit. May require additional adjustment or modification.

Universal design.  Vents in the back improve airflow to motor.  Smaller front reduces 'wind steer' and improves high speed stability.

$29.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Front Fender, Universal Off-Road

Universal fit. May require additional adjustment or modification.

Universal off-road front fender. Must be drilled to fit your mounting bolt pattern.

$23.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA ProCycle Approved

License Plate Frame, LED

Universal fit. May require additional adjustment or modification.

This frame includes six, white, full-spectrum LED bulbs on a 6-inch strip for bright illumination of your license plate. It is made in a sturdy cast aluminum, and is powder coated with a durable black finish.

Outside frame dimensions are 7.25" in. wide by 4.2". Center to center mounting hole distance is 5.7 in. All mounting hardware is included.

$29.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Heat Shield, Side Panel

Universal fit. May require additional adjustment or modification.

Adhesive heat shield for your new side panel plastics to protect it from the heat of your muffler.

Depending on your application and preferences, more than one heat shield may be useful.

Dimensions: 2"x3'

$14.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Replacement Plastics, OEM

KLX140G(RF) '17 - '24

Factory Replacement Body Plastics from Kawasaki

Select Product
$78.95

Seats

Seat Concepts seats are constructed using a foam material that is a much higher quality than OEM seat foam. Their proprietary formula provides a more plush and active ride, while still offering the necessary amount of support. Their unique comfort shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.

These features combine to offer a custom seat feel, and provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!

Width: 8.5"

Height: Same as OEM

Available as a Foam and Cover Kit for OEM pan only.

$219.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Seat Cover, Sheepskin

Universal fit. May require additional adjustment or modification.

This is the secret for being able to put in those 500 mile days. Even a good touring seat can feel a bit firm after a couple hundred miles. Sheepskin gives that little bit of 'cush' and provides superior air circulation. Velcro straps allow easy removal when you don't need it. Measures 14" wide by 19" long.

$69.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Seat Cushion, AirHawk

Universal fit. May require additional adjustment or modification.
  • Air filled AirHawk 12"x18" cushion custom fits your shape and redistributes pressure that causes numbness and discomfort when you ride
  • Seat cushion cover is constructed of a breathable, stretchable Nylon/Lycra blend with a non skid Urethane base
  • Open mesh side panels allow heat to escape
  • Easily inflates by mouth with no pump needed
  • Mounting straps and Repair patch kit included
$112.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Seat Warmer Kit

Universal fit. May require additional adjustment or modification.

9" by 9" carbon fiber seat warmer that goes between your seat cover and the foam to keep your backside happy on those really cold days. This improved design produces 25% more heat than most other warmers using just 30 watts.

Kit includes the warming unit, with connector, 24" extension cable, rocker-type on/off switch and stub to splice into your wiring along with complete detailed instructions.

$97.95

Armor - Bike Protection

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Skid Plate, Ricochet

KLX140G(RF) '09 - '24

New design gives you more protection and uses OEM mounting points for easy installation.

  • Made from 4mm thick aircraft aluminum
  • Oil drain hole for easy access
  • All mounting hardware included
$109.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards Kit, Moose

Universal fit. May require additional adjustment or modification.

Contoured alloy hand guards with inner mounts, allow space for the clutch cable and brake hose.

Images show a set of these hand guards installed on a set of CR High Gunmetal Fly Handlebars with large black deflectors. The far right image shows the need to flip the brackets that attach to the bar on the clutch and front brake side. On the front brake side the clamp must go over the front brake line while on the clutch side it goes under the cable.

Note: This kit includes the handguards only. Deflectors sold separate, can be added by selecting color from drop down menu.

Choose Handguard
$67.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Acerbis Rally Pro X-Strong

Universal fit. May require additional adjustment or modification.
  • High-impact, composite injection-molded outer guard around an anodized aluminum inner guard
  • Includes an indexed steel bar-end insert that mounts solidly and prevents Rally Pro handguards from slipping – even under the most demanding conditions
  • Small integral spoiler incorporated into design
  • X-Strong universal silver mount kit that fits 7/8” (22mm), Pro Taper 1 1/8"(28mm), Magura and Twin Wall aluminum handlebars included.

Some models with adjustable windscreens may need the windscreen rotated forward, such as the Royal Enfield Himalayan, to avoid contact at full lock. These are not compatible on Honda CB500X's and Honda Africa Twins.

 

$104.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Acerbis X-Factor

Universal fit. May require additional adjustment or modification.

These handguards come with mounts that will work on both standard and and oversize bars. The aluminum wrap-around bar is the biggest on the market with two large plastic shields that are also some of the largest available. The X-Factor hand guards offer great protection from the elements, especially during those colder months when you're trying to stretch out your riding season.

Works with 7/8" or 1-1/8" bars.

Thumbnail

  X-Factor guards require you to cut your lever ends down, or use short levers.

$139.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Acerbis X-Factor Replacement Plastics

Universal fit. May require additional adjustment or modification.

Replacement handguards for your Acerbis set up. Tough Polypropylene shields with a larger 6" outer diameter, built for extreme riding conditions.

$22.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Acerbis X-Factory

Universal fit. May require additional adjustment or modification.

The X-Factory Handguards from Acerbis feature a steel bar wrapped with an injection molded Nylon composite. A replaceable dual injected polypropylene shield mounts to the bar offering insurmountable protection from roost, debris, and extreme conditions.

A universal mount kit is included that allows for mounting on either 7/8" or 1 1/8" handlebars.

*will not fit XT250 with stock handlebars (oversize bars ok).  Recommend Acerbis Rally Pro X-Strong to clear master cylinder.

$99.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Barkbusters Bar End Weights (External)

Universal fit. May require additional adjustment or modification.
  • Designed to minimize handlebar vibration for Barkbuster Handguards that can’t accomodate OEM handlebar weights.
  • Sleek aerodynamic look.
  • Forged Steel with powder coat finish.
  • Fit in conjunction with most Barkbusters backbones (except EGO).
  • Fits externally to the VPS backbone.
  • Available in black.
  • Sold as a pair

Weight:
360 grams/pair or
180 grams/each

Fitment Notes: If you have a hardware kit listed below see special fitting notes as additional parts may be required

BHG-010             Requires two additional M6x40mm countersunk bolts

BHG-032             R1200GS/A requires two additional M8x55mm countersunk bolts

BHG-045              G650GS requires two additional M6x65mm countersunk bolts

BHG-050              Will not fit

BHG-051              Requires two additional M6x50mm countersunk bolts

BHG-059              Tiger XC, XCA & XCX (all ’15 on) use M6x45mm bolt from BHG-059 kit

BHG-075              Will not fit

BHG-079              Will not fit

$64.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Barkbusters STORM Kit for 7/8" or 1 1/8" Tapered Bars

Universal fit. May require additional adjustment or modification.

Protect your hands and levers with the Barkbusters Storm lever and weather protection handguards. Full wrap solid heat treated aluminum bars with secure two point mounts on each side provide strength while attractive and generous guards provide shelter from the wind and weather. Ride longer with the Storm handguards and complete mounting kit by Barkbusters.

Features:

  • Two mounting points provide secure protection
  • Full wrap guards
  • Heat treated aluminum backbone bars
  • Easy installation
  • Tough and weather shielding Storm handguards
  • Aluminum backbones are compatible with all Barkbusters deflector guards

What's in the box:

  • Left and right aluminum backbone bars
  • Inner and outer handlebar mounting hardware for both sides
  • Left and right Storm plastic handguard deflectors
  • Installation instructions
Thumbnail

  Not recommended for Africa Twin, T7, Himalayan, or V-Strom.  Please see specific listings for those models.

NOTE: tapered kit will not fit Renthal Twin Wall or Barkbusters VSBar

Choose Kit
Add Barkbuster Indicator Lights
Add Resistor Set
Add Bar End Weights
$129.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Barkbusters STORM Replacement Plastics

Universal fit. May require additional adjustment or modification.

Maximize your wind protection with the Barkbusters largest handguard plastic! For use with single sided Storm mount and all Barkbusters backbone handguards

$44.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Barkbusters VPS Kit for 7/8" or 1 1/8" Tapered Bars

Universal fit. May require additional adjustment or modification.

Keep your hands and controls protected from the wind and impact with Barkbusters VPS lever and wind protection handguards. Heat treated aluminum backbones with two mounting points of these handguards provide the strength needed to prevent a tip-over from ending your motorcycle ride. Impact resistant deflectors, available in multiple colors, provide protection for your hands from the wind and brush. Ride longer, more comfortably with Barkbusters VPS lever and wind protection handguards

Features:

  • Two mounting points provide secure protection
  • Full wrap guards
  • Heat treated aluminum backbone bars
  • Includes VPS left and right plastic deflectors
  • Easy installation

What's in the box:

  • Left and right aluminum backbone bars
  • Inner and outer handlebar mounting hardware for both sides
  • Left and right VPS plastic deflectors
  • VPS deflector fastening hardware
  • Left and right adjustable position wind extension deflectors
  • Installation instructions
Thumbnail

 Not recommended for Africa Twin, T7, Himalayan, or V-Strom.  Please see specific listings for those models.

NOTE: tapered kit will not fit Renthal Twin Wall or Barkbusters VSBar

Add Barkbuster Indicator Lights
Add Resistor Set
Add Bar End Weights
$134.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Barkbusters VPS Replacement Plastics

Universal fit. May require additional adjustment or modification.

Replace the deflectors on your aluminum bar backbones with Barkbusters VPS wind protection replacement handguards.

$49.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Barkbusters VPS Skid Plate

Universal fit. May require additional adjustment or modification.
  • VPS Skid Plate (set of 2).
  • Fit in conjunction with VPS plastic guards on a Barkbusters backbone.
  • Protects the outer edge of the aluminum backbone.
  • Adds a stylish finish to the handguard.
  • Available in Black only.
$19.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Cycra ProBend

Universal fit. May require additional adjustment or modification.

Construction of these handguards feature heavy duty aluminum guards with colored plastic deflector shields. They offer great protection from those trees that jump out at you on the trail and the cold wind and rain you encounter on the street. They feature a deep bend on the outer bar end for maximum freedom of hand placement and high quality bar mounts on the inside.

Select your desired color with the corresponding size mounts to fit your handlebar.

Thumbnail

Please Note: These handguards do not fit the Yamaha T7

$129.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Cycra ProBend Replacement Plastics

Universal fit. May require additional adjustment or modification.

Replacement handguards for your Cycra set up. Injection-molded high-impact plastic replacements. Includes all hardware needed for mounting.

$21.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Deflectors Moose

Universal fit. May require additional adjustment or modification.

Fits Moose and other aluminum hand guards

  • Aerodynamic and stylish design
  • Protect hands from brush, water and cold wind
  • Simple installation
  • Sold in pairs
$24.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, PowerMadd Fuzion

Universal fit. May require additional adjustment or modification.

FUZION guard feature the ultimate in hand protection with a unique design and flexible yet durable material. The expanded coverage area sweeps back toward your hand significantly increasing coverage making it perfect for cold, muddy or wet conditions. The FUZION features a unique two position mount and is constructed of molded light-weight closed-cell AEPE foam, which is crush-proof, water proof and extremely durable. The FUZION will work great for road of offroad riding, where wind deflection is important, and or bouncing off trees is a common occurrence. Kit includes mounts. Optional replacement mounts available.

Choose Type
$99.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Barkbusters BBZ Fabric

Universal fit. May require additional adjustment or modification.

Extend your comfortable riding season with Barkbusters BBZ cold weather protection handguards. Designed to fit with or without existing Barkbusters backbones or handlebar weights, these guards offer superb wind protection without limiting access to your grips or controls. Simple to install, they can be mounted or removed within ten minutes without permanent modifications. Ride with less bulky gloves in colder weather with the Barkbusters BBZ cold weather protection handguards.

Features:

  • Fits most motorcycle handlebars
  • Maximum cold weather protection
  • Compatable with or without Barkbusters backbones
  • Lined with waterproof membrane
  • Windproof
  • Full wrap design
  • Allows full access of controls
  • Does not block view of handlebar thumb controls
  • Simple to install and remove

Whats in the box:

  • Two BBZ cold weather handguards
  • Mounting hardware
  • Instructions
$104.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Handguards, Enduro ¾ Grip Mitt - OBR ADV Gear

Universal fit. May require additional adjustment or modification.

The OBR ADV Gear Enduro ¾ Grip Mitt is your answer to cold fingers! Our ¾ open design terminates right at the wrist, but still offers full coverage of the hand while blocking the swirling air flow that freezes finger tips. Their ¾ open design does not cover important controls such as Hi/Lo Beam, Turn Indicator, or Kill Switches making this Grip Mitt perfect for both Off Road, Enduro, ADV, and ATV applications with full wrap hand guards.

Features

  • High strength and water resistant 1680d Ballistic Nylon construction 
  • Universal easy on/off Velcro snap strap attachment system
  • Reflective Front Strip for High Visibility
  • ¾ Open design provides full coverage of the hand while not impeding controls
  • Works with OEM and Full Shield (Cycra/Trackside) style hand guards (Hand guard system required for attachment)
$74.99
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Handguards, Giant Loop Bushwackers

Universal fit. May require additional adjustment or modification.

Droppin’ into the weather? Combine Bushwackers Hand Guards with rigid hand guards/deflectors and heated grips for the ultimate protection against the elements. Ride safer and longer with warm, dry and clean hands and controls. Essential gear for motorcycles, snow bikes and snowmobiles.

  • Cold/wet weather comfort
  • Brush, mud and trail protection
  • Strap on/off in seconds
  • Multiple mounting configurations to fit most motorcycle makes/models equipped with rigid hand guards and/or deflectors
  • Tough stretch polyurethane strap (can be used separately)
  • Custom wind foil shapes
  • No stitching or pieces to fail
  • When not using Bushwackers Hand Guards, straps have a thousand other uses: Lash water bottles, fuel, gear to tail rack. Hold flashlight in place while working in dark. And many others!
  • Made in USA

REQUIRED EQUIPMENT: Motorcycle must be equipped with rigid hand guards or deflectors to support Bushwackers while riding.

Materials: Corona (UV) Treated, Matte Finish, .055 Gauge Polyethylene Plastic
Dimensions (flat): 13.5″ (length from end closest to bar clamp to end closest to bar end) x 16″ (widest part at end of bars) x 6″ (narrowest part nearest center of bar)

$54.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handguards, Molded Foam Moose

Universal fit. May require additional adjustment or modification.

Extra protection in bad weather to help keep your hands warm and dry. These nearly double the protection from most plastic type deflectors.

The outer shell is made from heavy-duty 500-denier nylon with 1/2" closed cell foam to keep the wind, cold and rain off of your hands.

$35.95

Controls

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebars, Aero Fly Racing

Universal fit. May require additional adjustment or modification.

Comfortable Oversize (or Fat Bar) Handlebars. For bikes with standard 7/8" handlebars these will require the use of a 7/8 to 1-1/8  adapter. Black in color. Raise your bars and get rid of the crossbar that obstructs your view of the speedo. Works with stock controls and cables.

$79.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebars, SE ATV High ProTaper

Universal fit. May require additional adjustment or modification.

These 7/8" bars fit in the stock clamps and raise your grips a couple inches. They look great too!

  • Width 813mm
  • Height 160mm
  • Rise 104mm
  • Clamp Area 236mm
  • Sweep 100mm
  • Control Area 199mm

 

$69.95

Handlebars, SE Trials Bends ProTaper

Universal fit. May require additional adjustment or modification.

These 7/8" Silver bars fit in the stock clamps.

  • Width 815mm
  • Height 113mm
  • Rise 84mm
  • Clamp Area 173mm
  • Sweep 49mm
  • Control Area 206mm
$73.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebar Riser, 2" Powermadd

Universal fit. May require additional adjustment or modification.
  • 4.75" wide,
  • Requires 7/8" bar clamps on bike
  • Raises handlebars 2 inches and allows fore/aft position adjustment
  • Provides dual pivot points for optimal bar positioning
  • One piece design is made from solid aluminum for superior strength
  • Available for 7/8" - 7/8" or 7/8" - 1 1/8" bars
Choose Bar Size
$99.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Handlebar Riser, 2" ROX Anti-Vibration

Universal fit. May require additional adjustment or modification.

These versatile Risers allow you to clamp a 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1- 1/8" aluminum "fatbar". If you are thinking of going to a fatbar after you bend your stock set or just want the versatility and option to run any bar, this is the riser to go with. Reducers lock into risers to insure no slippage between components. Anti-Vibe Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations (use standard pivoting risers). These risers use 8mm bolts. Always check and confirm that your bike has adequate cable and brake line length before installing any handlebar risers.

Choose Color
$171.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Handlebar Riser, Rox Pro-Offset Elite Block

Universal fit. May require additional adjustment or modification.

This unique design from Rox allows you to move your bars either closer (1" up and back) or further away (1" forward and 1-1/4" up) depending on rider preference. These risers have an oblong mounting hole so that they will fit virtually any triple clamp with 8mm bolts. A set of reducers lock into the risers ensuring no slippage whether you have a 7/8" or 1-1/8" bars.

Because these are offset there may be limited clearance between the gas tank and the risers when the bars are fully turned on some models, mainly when mounted to move the bars closer.

Choose Color
$99.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebar Riser, Solid Mount Adapter

Universal fit. May require additional adjustment or modification.
  • Adapt 7/8" bar mounts to accept oversized 1-1/8" handlebars
  • An economical alternative to replacing expensive top triple clamps
  • Include mounting bolts.
  • Raises handlebar 20mm.
  • Polished aluminum
$49.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Grip Donuts, ODI

Universal fit. May require additional adjustment or modification.

Protect your thumbs from blisters caused by riding on the inside of your grips.

Sold in Pairs.

$4.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Grips, Heated BikeMaster

Universal fit. May require additional adjustment or modification.

Highly efficient design delivers warmth faster than traditional heated grips.

Choose from the standard five level push button temperature controller, or the LCD display controller which shows the selected heat level and available battery voltage.

Choose Controller
$66.32
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Grips, Heated Full Diamond Koso

Universal fit. May require additional adjustment or modification.

These heated grips from Koso have been tested by us and we can say they will keep your hands warm and give you the grip you need in off road conditions, thanks to the full diamond grip design.

  • Clamp-on grips do not need adhesive
  • External temperature controller with 5 heat levels
  • For use with twist throttle; includes interchangeable throttle cams
  • Requires 35W and draws 2.5 amps per pair; low voltage shut off
$155.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Grips, Heated Koso Apollo

Universal fit. May require additional adjustment or modification.

The Apollo Heated Grips are designed with an integrated adjustable thumb switch, which allows them to easily fit on any kind of motorcycles on the market. The integrated thumb switch gives control to the rider to adjust the temperature level while keeping hands on the bar for a safer ride.

Its wide temperature setting range will keep the rider comfortable under the cold riding conditions.

The 5 color LED display will enhance the visual look of the heated grips and will allow the rider to quickly know at which heat level the grips are set.

This system will also detect if the battery voltage is too low and will automatically shut down the heated grips in order to make sure the rider have enough power to start the engine or use the motorcycle.

Specifications:

  • Integrated thumb switch designed for easy installation and control.
  • “Plug & Play” wiring connections to shorten the installation time.
  • Wide temperature settings for various weather conditions.
  • Low Battery Warning protection to ensure the motorcycle has enough power to start.
  • 5 color LED Indicators for the rider to quickly know in which heat level the grips are set.
$144.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Grips, Motion Pro RoadControl

Universal fit. May require additional adjustment or modification.
  • Ergonomically designed
  • Medium-density Thermoplastic Rubber (TPR) compound provides excellent feedback and control, without sacrificing durability
  • Full diamond pattern for an unparalleled feel in both wet and dry conditions
  • Inner diameter optimized to keep grips secure in any conditions
  • 115mm overall length; fit 7/8" bars and throttle sleeves
$10.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Grips, ProGrip 714 Rally

Universal fit. May require additional adjustment or modification.

These grips feature a thicker design that dampens vibration. The soft shoulder allows ease of movement. Three wire-tie grooves are molded into the grip to make securing them a breeze. We think they are great!

Add Grip Glue
$12.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Grips, ProTaper Pillow Top

Universal fit. May require additional adjustment or modification.

Reduces vibration and cushions impact. Inner core compound perfects the bonding interface with bars. Anti-Rip Tip™ uses denser compound to increase life of grip. Designed to self-clean and shed mud away from outer surface. Tacky gel-like surface compound is perfect for offroad and MX.

Add Grip Glue
$13.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Grips, Renthal Single-Compound

Universal fit. May require additional adjustment or modification.

Each pattern is available in three advanced synthetic rubber compounds. This means you can have the optimum combination of strength, tackiness and shock absorption to suit every riding condition and individual style. Soft grip is extremely soft, giving you a very comfortable ride, great feel and reduces the chance of blisters; however, because the grip is so soft, it wears quickly. Medium is a compromise between firm and soft. Firm grip has the same feel as a stock grip, it is very strong and has very good resistance to tearing and abrasion. Half Waffle has waffle pattern in finger area for traction and diamond pattern on palm side to reduce blisters. Full Waffle: designed after the CR Honda® grip.

Add Grip Glue
$16.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Grips, Vans Cult - ODI

Universal fit. May require additional adjustment or modification.
  • Feature the classic Vans waffle sole pattern with a subtle domed center section for improved ergonomics and vibration dampening
  • 125mm in length
  • Fit 7/8" bars
  • Sold in pairs
Add Grip Glue
$19.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Cruise Assist, "Crampbuster"

Universal fit. May require additional adjustment or modification.

This little jewel reduces hand fatigue and cramping on long rides or daily commutes. The Crampbuster is not a throttle locking unit but, rather a simple clip-on device which allows you to relax your grip while riding.

$10.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Cruise Control, Go Cruise

Universal fit. May require additional adjustment or modification.

The Go Cruise cruise control mounts over the throttle grip and rests on the brake lever to hold your throttle open, allowing you to stretch and rest your hand on long rides. Installs and removes in seconds with no tools. You can roll off the throttle manually to disengage the Go Cruise.

$19.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Lever, Parking Brake BrakeFix

Universal fit. May require additional adjustment or modification.

Attach this over your brake lever and hand grip, squeeze the brake lever, pull the locking bar in and lock the black portion down. This creates a locked front brake, making parking safe and secure with about 5 seconds of effort.

To unlock the BrakeFix, you just lift the back of the black hooking portion to release it. This takes about 2 seconds. Perfect for use with Snapjack type stands or just parking on an incline.

$19.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Levers, Replacement Set

KLX140G(RF) '17 - '24

Order up your new levers here! If you keep breaking levers, you might want to think about a set of hand guards to protect them in case of a fall.

  • Meets or exceeds OEM specifications
  • Made from aircraft A-360 die cast aluminum
$21.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Control Cables, Motion Pro

KLX140G(RF) '17 - '18
  • Manufactured to exact measurements to meet or exceed oem specification
  • Tempered steel wire housing with an inner nylon sleeve for long life & smooth operation
  • Cables are individually packed in a poly sleeve with color coded header cards
Choose Cable
$12.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Emergency Cable Repair Kit

Universal fit. May require additional adjustment or modification.
  • Handy, compact kit for on-the-go emergency throttle, clutch and brake cable repairs
  • Includes 2 different diameter 6.5 long inner cables and an assortment of cable ends
$19.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Mirror Extenders

Universal fit. May require additional adjustment or modification.

Can't see past your shoulders? These mirror extenders will get your mirrors higher and farther out for a much better view of the road behind you.

  • Aluminum extension with Japanese 10mm x 1.25 male and female threads
  • Works with standard Ball Stud Base to offer clearance in some applications
  • Torque spec: 5 Nm
  • Sold in pairs
Choose Length
$12.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Mirror Mount Adapter

Universal fit. May require additional adjustment or modification.

Replaces all 2 bolt style clutch/brake lever mount clamps on your clutch or brake lever holder. Can help save space on short bend handlebars.

$24.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Mirror Mount, Split

Universal fit. May require additional adjustment or modification.

With the split back, you don't need to remove your grip or throttle tube, just put it on and tighten 'er down. Put the mirror in and hit the road. Clean and simple.

$11.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Mirror with Mount, KTM Style Folding

Universal fit. May require additional adjustment or modification.

This new mirror can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price.

Fits either left or right side and includes handlebar mount.

Thumbnail

Sold individually

$29.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Mirror, Doubletake

Universal fit. May require additional adjustment or modification.

Made from a nylon and fiberglass composite, these mirrors are extremely durable. They easily fold out of the way when you head off-road.

Enduro Mirror 4"

Ideal for dualsport use, where you want a low profile when folded down. SAE spec convex glass gives a much greater field of view than flat glass.

ADV Mirror 3" x 5"

Adventure mirrors are designed for adventure riding where you want your mirror extended most of the time.

Mirrors mount to any 10mm perch. Mirror and arm included as shown in pictures.

Thumbnail

Sold individually.

Thumbnail

 All Yamaha's will need a mirror adapter if you have the stock perch.

Choose Style
$59.95
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Mirror, Folding Dualsport

Universal fit. May require additional adjustment or modification.

This new mirror screws into your stock mirror mount but can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price. Fits either left or right side.

Sold individually. If a set is needed, order two.

Thumbnail

 All Yamaha's will need a mirror adapter if you have the stock perch.

$22.95