Available in unisex Black and Charcoal Gray. These have our logo on the front left shoulder and on the back, with our tag line "Back Roads or No Roads" down the right sleeve in Yellow.
|Chain Size:||Front Sprocket:||Rear Sprocket:||Front Tire:||Rear Tire:||Spark Plug:|
|420x88 ('02)||14T ('02)||37T ('02)||2.50-14||3.00-12||CR6HSA|
|420x86 ('03-'09)||14T ('03-'09)||33T ('03-'09)||2.50-14||3.00-12||CR6HSA|
|420x90 ('10-'19)||13T ('10-'19)||38T ('10-'19)||2.50-14||3.00-12||CR6HSA|
Calendars are in stock now. Get yours before we run out!
We have two sizes available. The desktop calendar is the perfect size (6" by 3.75") to sit on your desk.
The wall calendar is 11" by 17" when fully open for use on your wall or next to your desk.
Use them at the office or in your home to remind yourself of where you would really like to be, and doing what you really love the most - riding your bike!
Saddlemen's Destination Pack secures your valuables within a steel wire mesh sandwiched between a scratch-free, soft inner liner and a tough water resistant nylon outer bag to provide vault-like protection. A velvet smooth inner liner protects your cargo while a six-foot-long flexible stainless steel cable secures the bag to the bike or other permanent structure. (Padlock not included.) The cable doubles as a motorcycle security cable - prevents theft of bag or bike. 12 x 24 with a 44 liter capacity.
Limited Quantities Left! Grab yours now while supplies last.
New aluminum cylinder with plated aluminum liner. High performance camshaft with lightweight piston. This is the largest bore kit available for the KLX110 that does not require boring your engine cases.
- Aluminum cylinder with plated aluminum sleeve
- BBR high-performance camshaft
- 60mm lightweight aluminum piston
- Includes gaskets
An easy big bore kit that increases your KLX110cc motor to 130cc. Includes piston, rings, pin, clips, and gaskets. A quick and inexpensive way to really improve your engine.
- 57mm aluminum piston with pin, clips, and rings
- Includes base, head, and side cover gaskets
- Requires boring of your stock cylinder
If you want a fire breathing KLX110, the BBR 160cc kit is the right choice. This kit allows the largest possible displacement available without the headaches of running a stroked crankshaft.
- Aluminum Cylinder w/ oversized sleeve
- Requires boring of your stock engine cases for the larger sleeve
High performance camshaft for the KLX/DRZ110. Higher lift and duration than stock.
- Makes more aggressive "race" style of power
- Bike still starts easily and idles smooth
- Includes steel plates, high performance friction plates, and high quality clutch springs
- Springs are 20% stiffer than stock
- Steel clutch plates last 3 times longer than stock and are less likely to deform
Heavy duty springs help prevent clutch slip in high-performance motors.
- Custom wound from chrome-silicon wire
- Preset for long life
- Higher spring seat pressure to resist clutch slip
Providing unbeatable performance and exceptional value, Hi-Flo is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide.
Includes degree wheel, dial-gauge, multi-position stand, extension, 3-sizes of positive-piston stops, and a handsome wooden carrying case.
Made from medium carbon steel with hardened jaws. It features spanner pins and the jaws open up to 5" wide. It's ideal for holding clutch hubs, flywheels, gears, sprockets, etc. Made by Motion Pro.
This tool is designed to separate vertically split crank case halves on two and four stroke engines. Adjustable arms allow it to be used on multiple bolt patterns found on a variety of makes and models of motorcycles. Industrial grade steel construction with black oxide finish for long service life. Comes with 8mm mounting bolts and 6mm adapters. Protective carrying case included.
For easy removal of recessed oil filters.
Conical point screws pierces and grabs the metal end cap of the filter.
reduces potential damage to the engine cases.
NOT for use on re-usable oil filters.
A 3-pack of easy to apply strips measure the temperature of engine, suspension, and radiator components. Temperature range 146° to 248°
Thread Chasers are designed to clean and re-cut damaged aluminum threads.
this kit contains the two sizes most common on metric motorcycles, M6x1.0 and M8x1.25.
Thread Chasers also remove dirt and metal shavings that become captured in thread grooves.
Uses 8mm or 10mm hex sockets, a Must for all tool kits.
Dual marked feeler gauges. 32 blades from .03mm/.001" to 1mm/.040"
Fuel and Intake
- Increased air flow over the stock air filter
- Designed to increase horsepower and throttle response
- Designed to fit inside the factory air box
- Larger surface area over foam filters which offers longer service intervals in dusty conditions
- Four layers of premium cotton gauze provides outstanding filtration
- Washable & re-usable, never wears out
- One filter will last the lifetime of your bike
Sold in 6 packs
- Compatible with many air filter boxes.
- More air flow allows you to add more fuel to your intake mixture, increasing performance.
This canister by Pro Circuit allows you to move the overflow tubes from the carburetor up and out of the way. Universal application.
Become more visible and look cool while doing it. The ProCycle Natural Tank LED Light Kit will add more light to your bike with the push of a button.
Kit includes a handle bar mounted lighted switch, two 12" LED light strips with adhesive backing, four saddle splice connectors, and a center harness for connecting to your bikes harness.
Installation is quick and easy.
*Please note All colors other than amber and white are recommended for off road use only*
If you're like us, you hate the long floppy vent hose hanging off the cap of your aftermarket tank. This one-way vent cap replaces the long hose with a short one only about 2" long. It allows air into your tank but prevents fuel from sloshing out. Machined from billet alloy and anodized for good looks.
Not for stock fuel tanks!
The small size and right angle hose barbs make this filter easier to fit into the small space between your fuel petcock and carburetor. Filter body is only 7/8" diameter. Straight filter is 2" long, 90 degree filter is only 1-5/8" long.
This filter is meant for 5/16" fuel lines. Only 1/2" thick it is small enough to fit just about anywhere.
Fuel supplies can be sketchy at times. This filter lives in your tank to trap dirt and debris as it is poured into the tank. Features a custom shaped adapter that fits securely under the gas cap, creating a leak-proof seal. If it stays out of your fuel, it can't get into the carburetor! Created by the filter experts at Twin Air, this filter fits IMS, Acerbis and Safari brand gas tanks.
Ordering new fuel line? How about a set of fresh zinc plated clamps to go with it?
These will be sure your fuel line stays connected. A pack of 8 clamps in 2 sizes to fit most 1/4 or 5/16 fuel hose.
Hose reducer to go from 5/16" line down to 1/4" line. Many bikes have 5/16" carburetor spigots but most aftermarket petcocks are 1/4". This solve the problem of mismatched sizes. Solid brass construction. Can be used to route or repair fuel lines, oil lines or air lines. Barbed ends provide a secure fit.
30" lengths. Sizes shown are ID. All of these lines are stronger and more durable than vinyl fuel lines and are resistant to swelling, UV light, as well as hardening and cracking.
Need to mount two containers? A water and a fuel? Two waters? Already have a RotoPax Mount for a single container? Get this extender to work in conjunction with a pack mount and that will be no problem! Single mount, two containers.
RotoPax holder made to mount a single Fuel and/or Water container.
Need to mount two containers? A water and a fuel? Two waters? Get the extender which allows you to stack two containers no problem! Single mount, two containers