Make your life a little easier by having a set of these in your toolbox. Designed to simplify installation and removal of clip-type master links. One tip is shorter and notched to be placed on the pin which allows the longer end to push the clip.
We have moved to a new system. Please reset your password to login the first time.
A handy pocket size slide calculator from Mikuni to help you calculate jetting changes due to temperature and elevation changes. Will work for single and multiple cylinder machines whether 2 or 4 stroke. Also includes a guide for determining rich or lean conditions.
Combines wrench and bleeder valve into one convenient and compact tool
- Fits most 8 mm bleeder nipples
- Bleeds brake systems and hydraulic clutch systems
- Internal check valve for fast easy bleeding
- Anodized billet aluminum handle with chrome moly steel body
- Compact size for tight spaces
- High quality internal seal
- Multi position handle
Can break or rivet chains from #35 to #530 like a pro.
kit includes a 2mm, 3mm, and a 4mm pin to fit most chains.
kit includes press plates,and all necessary riveting pieces and comes in a durable plastic case.
NOTE: when breaking a chain, YOU MUST grind the heads off of both pins on a link first.
Use this tool to check for air leaks in two-stroke engines. It includes air pressure gauge, pump-up bulb and most fittings and adapters for single and twin-cylinder two-stroke motorcycle engines. Packed in a convenient carrying case with instructions.
Designed to check the amount of cylinder leakage in a 4-stroke engines. With an air source of 70 to 160 PSI, this system will pressurize the cylinder with 60 PSI of air. Gauge registers the total percentage of leakage past the rings, head gasket, intake and exhaust valves. System includes 10, 12 & 14mm spark plug adapters, regulator & gauge. This tester will speed up troubleshooting and will help to isolate bad components.
Designed to seal completely around the cable housing and stop all those messy leaks. With the unit closed and sealed around the cable, your cable gets better lubrication and you waste less lubricant.
- Works on most cables with a 4mm - 8mm O.D. housing.
Designed for quick and accurate alignment, this tool clamps squarely to the rear sprocket so the alignment rod can indicate sprocket alignment with the chain.
The features of this tool include 300 psi capacity, bleeder valve and T-handle plunger pin chuck. Swivel chuck has a 12" flexible hose. Comes complete with instructions, carrying box and Schrader valve extension (required on some Showa shocks). Nitrogen bottles available at any welding supply house.
For easy removal of recessed oil filters.
Conical point screws pierces and grabs the metal end cap of the filter.
reduces potential damage to the engine cases.
NOT for use on re-usable oil filters.
The easy way to remove your steering bearings without damaging them. Remove all tapered bearing races from 47mm to 52mm OD. Tool uses a precision machined anodized aluminum cup that will not damage the seal surface while hardened steel jaws securely engage the inner lip and pulls the race out perfectly straight causing no damage to the race or frame. Motion Pro includes a limited lifetime warranty.
Latex free gloves for the shop or garage.
- 10 Pack
Showa removed the schrader valve on many newer rear shocks. Now you need a needle to recharge your shock with nitrogen after a rebuild. Race Tech built this unit just for that job.
6" wire twisting pliers with return spring mechanism for easy and safe wire twisting.
• Comes with 25' of .032 stainless steel wire
The Snapjack is an easy to use, portable, sturdy jack for chain lubricating, adjustment and chain drive maintenance. Also, simplifies cleaning. It can lift the rear tire up to 1/2" to allow the tire to spin freely. Includes front brake locking strap and handy carrying bag.
Precision cut from heavy gauge material.
Extremely durable design.
Push/Pull design for hard to reach places.
Soft but durable PVC coated handle.
The Phillips type screws used in Japanese motorcycles are actually Japanese Industrial Standard (JIS) screws are very easy to strip if you are using a regular Phillips screwdriver.
This is a high quality Motion Pro T-handle driver with #1, #2, and #3 JIS bits made from S2 tool steel. There is bit in each end of the driver held in place magnetically. These are 1/4" hex drive heads so you can use all common driver bits as well. The narrow drive head profile easily fits into tight locations. Main shaft is 8.5" long and is chrome plated for protection.
Innovative design that cleans chain from 3 angles at once. Long handle keeps fingers and hands away from chain and sprockets.
- Will not harm O-ring chains
- Easily adjustable for all chain sizes
Thread Chasers are designed to clean and re-cut damaged aluminum threads.
this kit contains the two sizes most common on metric motorcycles, M6x1.0 and M8x1.25.
Thread Chasers also remove dirt and metal shavings that become captured in thread grooves.
Uses 8mm or 10mm hex sockets, a Must for all tool kits.
This lock is a must have for any rider. Features a 10mm hardened steel pin that will resist any attack.
Comes with carry pouch and a disc lock reminder cable. Includes three keys, one with a mini flashlight.
Build your wheels the easy way! A truing stand makes getting your wheels trued correctly a breeze. Use in conjunction with a dial indicator for best accuracy.
A professional level adjustable spoke torque wrench. Range from 0 to 62 inch pounds. The handle has a rubber coated end to protect your rims from scratches. Includes Torque wrench, standard handle (for tough disassembly work) and seven different size tips, all packed in a protective case.
Included tip sizes: 5.1, 5.6, 5.8, 6.3, 6.7, 6.9 and Spline drive.
Always wanted to build or true your own wheels? Maybe just be able to balance your wheels after changing tires. This stand is perfect for both of those tasks.
- Features a bubble level to balance wheels correctly the first time
- Steel plate construction for durability and stability
- Comes with shaft, cones and spacers to fit just about any wheel
Time to freshen up your forks? Three pack or single 16oz bottles of Maxima fork oil that will refill your tubes after any fork job. This is a high-quality fork oil and what we use on our projects here at ProCycle.
For most situations you will use 10w Fork Oil. Some custom applications will use the 5w or 15w oil. Order the 5w oil if you have Ricor Intiminators or Cogent DDCs.
A 1 liter bottle of high quality Bel-Ray shock oil.
A 1 Liter bottle of light viscosity 3w shock oil.
A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing due to weathering or chemicals. Anti-Seize assures easier disassembly. Temperature range: -60°F to 1600°F (-50°C to 870°C). Salt, corrosion and moisture resistant – ideal for marine use. Meets Mil Spec #907E.
Bel-Ray Super DOT 4 brake fluid is specially formulated to exceed all DOT 3 & DOT 4 specifications. What this means to you is exceptional resistance to vapor lock and maintaining consistent lever feel during extreme brake use. This 12 ounce bottle is enough to finish just about any job.
- Formulated for hydraulic brake systems
- Mixes with all fluids meeting DOT 3 and DOT 4 specifications
- Boiling point: dry 446°F, wet 311°F
- For brake systems and hydraulic clutches, except systems using mineral base fluids
Cycle Wipes are pre-moistened and pre-folded towelettes made with a special non-woven "Dirt-Grabbing Mesh Fabric." They are soft, gentle, durable, and a lot more safe than that old rag or paper towel. Their formula contains no harmful ammonia, and is specifically formulated for motorcycle use as an all purpose cleaner for plastic surfaces, especially helmet face shields, headlights, turn signals, and auxiliary lighting.
Cycle Wipes are packaged 12 to a resealable envelope designed to keep them moist until ready to use. They are compact and convenient and easily stored in a jacket, tank bag or pocket. Although Cycle Wipes are very gentle, one should remove gritty dirt and abrasive particles prior to using them. Cycle Wipes are not recommended for use with visor inserts.
Dielectric Grease is an insulating silicone grease designed to insulate and protect electrical connections. Pack it into the back side of electrical connectors to protect them from moisture and corrosion. Do not put it directly on the connection surfaces.
- Protects electrical connections and wiring from salt, dirt and corrosion.
- Prevents voltage leaks around any electrical connection.
- Extends the life of bulb sockets.
- Suggested Applications: Marine and automotive electrical connections, spark plug boots, trailer hitches, battery terminals.