A digital voltmeter that can be mounted almost anywhere, on any bike, thanks to ProCycle's multi-position stainless steel bracket. Keeps you informed on the status of your charging system. Completely waterproof and comes with connectors, wires and thorough instructions. A "must have" device for riders who use heated riding gear, heated grips, additional lighting, GPS, etc.
ProCycle currently has reduced staffing due to our state governor’s policies. Orders will be processed as efficiently as possible. Your patience is appreciated.
Honda
Electrical
Lighting
- Features an innovative design; made of polypropylene
- 10 bright white LED bulbs ensure visibility at night and high illumination while using low power consumption
- LEDs can be used as turn signals and will not heat up after prolonged use
- 12V 35/35W H4 bulb with LEDs; total wattage is 50
- Universal fitment with anti-vibration rubber straps
- Position of mounting points allow ample room for brake line/cable
- Universal mounting strap included
- DOT-ECE-SAE-TÜV compliant
Designed specifically for aggressive night time riding by combining amazing distance projection, wide peripheral spread and a smooth blend of near field light. Utilizes four Cree™ XM-L2 LEDs, the brightest, most efficient LEDs on the market giving you a blinding 4,900 lumens and 40 watts. The Squadron® Pro is plug and play making for an easy install.
Add the Skene Dimmer Kit to control the brightness to match riding conditions.
To run this kit on smaller bikes (below 400cc) you may need to have your stator rewound by Baja Designs. An aftermarket stator can be purchased instead of a rewind.
The IQ-275 Intelligent Lighting Controllers from Skene Design allow you to quickly and conveniently set the brightness of your Squadron Pro headlight to match riding conditions. Often auxiliary lights are too bright or have too wide a lighting pattern to operate at full power during the day or under certain road conditions. With Skene Design's innovative intelligent lighting controllers you can pre-program several different brightness settings and with the flick of a switch immediately select the desired brightness.
Each 10 watt Solstice Solo produces 900 lumens, which is roughly equal to a 50 watt halogen bulb. These are one of the brightest LED off road lamps on the market. The rugged and compact 2” x 2” square die-cast aluminum housing makes mounting easy. The Solstice Solo also features a 4 sided channel design that allows you to interlink it on all four sides with other Solstice Solo pods. Includes stainless steel mounting bracket and waterproof connection. Choose narrow, medium, wide or elliptical light beam pattern. Our favorite is the Elliptical pattern which is wide and flat, putting most of the light where you need it the most.
Sold each.
A game changer in compact auxiliary lights. High output, compact and lightweight!
The New Cyclops Aurora 2 inch lights rated at 4000 lumens for the a set. Using an authentic top binned Cree XHP50 emitter these lights pack a punch!
Available with or without the daytime Running light option (DRL) which can also be a front blinker. (you may need a led flasher to do that)
Like all Cyclops lights we only use the Best Real Cree emitters. R113, R10 TUV and Emark certified IP68 rated.
Includes a full relayed wire harness designed for a Motorcycle. No need to use a switch if running the DRL version, also no need for a switch if using the skene dimmer or want the lights on in high beam and off in low beam. The factory switch will work for these applications. Unless you have a LED factory headlight in a R1200gs,850Gs or KTM1290 these bikes will require our Raider canbus controller.
Look at these quality features!
- Solid Steel cradle mount. No broken or cracked mounts!
- CNC machined aluminum housings
- Polycarbonate lenses, Break-proof!
- 15 degree beam patterns, a great choice for distance and field of view.
- 19 watts each
- 2000 lumens a piece, 4000 lumens for the set.
- Includes a relayed wire harness
- Input voltage 9-30VDC
- R113, R10 TUV and Emark certified
- IP68 Rated
Now a lifetime warrantied LED light set at a budget friendly price.. and Not made in China.
The new Cyclops Pegasus led light set comes complete with a high quality relayed wire harness and a potent combo light beam pattern.
We are able to offer this fantastic light at a great price due to a one piece optic and sealed beam construction, eliminating extra parts and creating a very durable and high performance light.
These lights feature Cree 3 watt emitters for amber and 7 watt emitters for white with two 10 degree and two 25 degree optics, Good for 400 plus ft of lighting (white).
This combo beam pattern offers good forward lighting and extremely good conspicuity.
The light set is available in white 5600K or a extremely bright Amber, perfect to allow those autos to see you. Lightweight and robust at 2.75 inches with a single stud mounting, they fit just about anywhere you would like to mount your lights.
Specs:
- Canbus compatible, full relayed wire harness included
- 5000 plus lumens for the set
- 28 watt draw per white light, 12 watt draw per amber light
- ISO 67... waterproof
- 5600K (white 33% brighter than Amber)
- Life time warrantied
- Sold as a pair
The little light that can! Don't be fooled by the mini size, big light comes out of this bad boy.
New design for 2020 featuring smaller switch, metal handle bar mounts and options to allow this light to work for many applications. Redesigned cases, cords, strain reliefs and optics for optimal water resistance, ruggedness and performance.
It uses a go pro type mount with an aluminum platform to mount almost anywhere. Also included is a handle bar mount (mount on center of bars). No plastic parts on the light head.
Included is a rubber handle bar mounted switch with 2 power level settings and a strobe pattern.
Combo beam pattern, spot and wide beam in one light.
Compatible with Go Pro mounts, Perfect for modern EFI bikes.
- basic wire harness
- 3500 lumens
- Spot and flood beam in one light
- 25 watt power draw.
- 2 year warranty, does not include crash damage.
- 4 inches long by 1.350 high
The perfect solution for mounting those LED auxiliary lights. The base of the RAM mount is held by your mirror. This puts the light where you can easily adjust the angle for different riding situations. This mount fits VisionX Solstice lights or any other light with a 6mm or 1/4" hole in the mounting bracket.
This is for Mount Only. Sold individually.
10 Watt LED lights sold separately.
Become more visible and look cool while doing it. The ProCycle Natural Tank LED Light Kit will add more light to your bike with the push of a button.
Kit includes a handle bar mounted lighted switch, two 12" LED light strips with adhesive backing, four saddle splice connectors, and a center harness for connecting to your bikes harness.
Installation is quick and easy.
*Please note All colors other than amber and white are recommended for off road use only*
This frame includes six, white, full-spectrum LED bulbs on a 6-inch strip for bright illumination of your license plate. It is made in a sturdy cast aluminum, and is powder coated with a durable black finish.
Outside frame dimensions are 7.25" in. wide by 4.2". Center to center mounting hole distance is 5.7 in. All mounting hardware is included.
These bright LED turn signals will bend more than 90 degrees without damage. Only 2 1/2" long.
- Sold in pairs
- Requires LED flasher unit
- Bikes with a single dash indicator require a diode kit
The Barkbuster LED Indicator Lights for Jet, Storm & VPS Plastic Handguards to increase your visibility and safety using 15 high intensity LEDs that mount directly to the plastic handguard shells. Super bright auxiliary signals will make your directional intentions clear to upcoming traffic. The LED indicators are very low draw and E marked for road use.
Features:
- High intensity LEDs with amber lenses
- Intended for use as indicators/turn signals
- E mark approved for use as an indicator light
- 15 LEDs per indicator amplifies your visibility to other traffic
- Enhances safety by imrproving clarity of planned directional changes
- Very efficient performance with low power draw
- Designed for use on the upper surface of Barkbusters Jet handguard plastics
- Compatible with the upper and lower surface of VPS & Storm plastics
What's in the box:
- Barkbusters LED indicators in amber (pair)
- Mounting materials
- Installation instructions
Please Note: Not compatible with the electrical system on the Honda Africa Twin CRF1000L
Clear lens, amber LED type lights. Short flexible stems. Very small, only 2 7/8" long. Requires a LED turn signal flasher to flash properly.
The Click'n'Ride signals are the quick release turn signals we have all been waiting for. The turn signal base socket will be mounted and wired to stay on the motorcycle. Each turn signal is equipped with a quick release bayonet which easily presses into the mounting socket. This kit is perfect for making a quick conversion from a road-going dual sport to a trail-ready dirt bike.
Features:
- Vibration-proof components
- Easy fit sockets
- Quick release Bayonet
- Seamless ultra-sonic sealed lens (dust and waterproof)
- 3D lens optics
- Philips LED's
- Moisture, mud & dust guard
Includes:
- 1 quick release indicator – LEFT hand indicator
- 1 quick release indicator – RIGHT hand indicator
- 2 Sockets with Moisture Guard and wiring (bullet ends)
- 2 nylon spacers (1mm)
- 2 nylon spacers (2mm)
*Please note: LED turn signals require an LED flasher,
*Bikes with single dash indicator require a diode kit,
*If using a combination of conventional and LED signals then a resistor is required.
Don't be fooled by thinking these are the same as the others, they may look similar but are far from it in terms of reliability, function, ease of installation, product support.
Now easily turn your blinkers into additional running lights and or brake lights(rear) for added visibility.
Bright white light in the front and red in the rear. You can select to run the rear red as brake lights or red running lights. If ran in brake light setup the red brake lights will come on sequentially flashing twice then go to solid red! Be Seen!
Dazzling bright Amber sequential blinker functions.
All in a Extremely rugged rubber stock to help prevent damage from a tip over or impact with brush, trees etc. Bends back 90 degrees or more.
A generic kit with Bullet connectors supplied. These should work well on most brand bikes, but you will have to add the connectors that are included in the kit.
Deletes flasher, jump cord included, No need to purchase led flasher units! Your indicator light on dash may not blink with this kit, it will activate, but remain solid. Adding a LED flasher will keep the indicator light flashing.
Set of 4
Cyclops builds these in house as fast as they can, parts are usually in stock and orders are filled asap, it may take 5-10 business days for an order of these blinkers to get out our door.
Ultra bright amber LED turnsignals offer nearly the same visibility in a much smaller package. 15 amber LEDs in every signal. Flexible rubber stalks. Requires a LED turn signal to flash properly.
Pack of Two
Triangle/Teardrop style signals with LEDs. Mounts on any flat surface to keep out of the way of brush, branches, and your exhaust system. Requires LED flasher or LED turn signal resistors to flash properly. Sold in a pack of 2 signals.
These LED lights feature a metal spring in the stalk allowing it to bend in any direction without breaking.
- Flexible stalk, 180 degree deflection
- Ultra tough housing and lens
- All weather
- Sold in pairs
You may have noticed after adding aftermarket turn signals (especially LED units) that your blink rate has significantly increased. OEM flashers are designed for standard bulbs which draw a few watts each, much more than typical aftermarket bulbs or LED signals. This device is an effective alternative to using load resistors because it consumes considerably less watts, consumes less space, and does not generate excessive heat.
The plug is exactly the same as the OEM unit making swap outs a cinch. No wiring changes, cutting and adding connectors. Just plug it in and you will have a steady flash at the DOT OEM rate regardless of what signal bulbs you use. It is an all solid state design and will blink correctly with loads all the way down to 0.1W / 0.01A.
Not for any DRZ400
This type of flasher is required for LED turn signals. For DC (battery) systems only. Includes 2 female connectors for universal fit.
Not for any DRZ400
Allows LED type turn signals (and low wattage flush mounts) to flash using a standard flasher unit. Connectors included. One kit works with 4 signals.
The Barkbusters 10 OHM Resistor Set for LED Indicator Lights will correct the flash rate of your auxiliary signal lights. Ready to plug in connectors make installation a breeze. These resistors are intended for Barkbusters LED Indicator Lights.
Features:
- 10 OHM
- Intended for Barkbusters LED Indicator Lights
- Corrects flash rate of LED signals
- Flash rate: 90 (+/- 30) times per minute
This devices allows any two wire after market LED turn signal indicators to operate as running lights (always on), and will blink on / off when the turn signal switch is activated. It is highly recommended to use this product with the Fixed Rate Turn Signal Flasher. Each package contains one dual adapter, good for operating both turn signals, left and right, with the appropriate kit. Please order the Front kit to turn the FRONT flashers into running lights and the REAR kit to turn the rear flashers into running lights.
Comes with factory connectors to make installation easier by plugging into the factory harness turn signal connectors. Works with any two wire aftermarket LED turn signal indicators.
This Diode Kit is only necessary if you have a single indicator for your turn signals. One dash light for both left and right signals (such as on the DR650).
This kit allows power to flow in just one direction from the LED signals to the indicator light regardless of which direction you are signalling.
Frame
Not your average rubber insert! These rubber covers go over the top of your MK3 Pivot Pegz so that the aggressive teeth are only exposed when you need them in muddy conditions.
- Unique, innovative design
- Wide flat platform
- Openings allow mud/dirt to pass through
- Easy and quick to get on/off
- Good grip
- Reduced vibration
- Extra comfort
The easy way to remove your steering bearings without damaging them. Remove all tapered bearing races from 47mm to 52mm OD. Tool uses a precision machined anodized aluminum cup that will not damage the seal surface while hardened steel jaws securely engage the inner lip and pulls the race out perfectly straight causing no damage to the race or frame. Motion Pro includes a limited lifetime warranty.
Drivetrain
- Accurately and quickly measures chain slack
- Two scales measure both chain slack and chain to swingarm clearance
- Setting chain slack properly dramatically improves chain life
- Lightweight compact design fits easily in your tool box or road kit
- Works on most street and dirt bike applications up to 75mm chain slack
- Made from engineered nylon with aluminum measuring scale
- Anodized laser-etched precision measuring scale
- Refer to your owner's manual for proper chain slack and procedure
- Patent pending
Can break or rivet chains from #35 to #530 like a pro.
kit includes a 2mm, 3mm, and a 4mm pin to fit most chains.
kit includes press plates,and all necessary riveting pieces and comes in a durable plastic case.
NOTE: when breaking a chain, YOU MUST grind the heads off of both pins on a link first.
Here is a tool to help you remove a few links from a chain that is too long. A great tool to have in your tool box.
Note! The head of the pivot pin you are going to remove must be ground down level with the side plate before using this tool to push it out. Failure to do that will cause damage to the tool that is not covered by any warranty!
This brush has 2.25 coils of 360° chemical-resistant nylon bristles to make it the fastest, most effective, precise and systematic method for giving your chain a thorough cleaning. It will help the performance and life of the chain, sprockets, and the engine. This brush will fit any 400 or 500 series chains.
- PBR = press, break, rivet
- Innovative design will press, break and rivet 520, 525 and 530 chains with one convenient tool
- Versatile design will remove chain pins, press master-link plates and rivet hollow nose and soft nose (quad stake) master link pins on O-Ring and non O-Ring type chains
- Easy-to-use design allows you to change tool functions by simply moving the position of the anvil block
- Indexing letters on movable anvil and body ensures correct tool configuration; simply line up the letter on the anvil to the letter on the body to get the configuration you need
- All components conveniently store on tool when not in use
- All steel construction with heat-treated components for strength and durability
- May be supported in a vise or held with included handle
- Great for the professional technician or DIY mechanic
- Compact and light enough to carry in a tool bag for trail-side repairs
- Patent Pending
This Motion Pro press tool is a must have when installing and removing Clip-Style master links (520, 525 & 530 sizes).
Easily presses on and off master link plates, works on 520, 525 & 530 Clip-Style master links.
Maximum master link width 24.8mm.
Will not damage master links, hardened steel pins for reliable use.
Light weight billet aluminum construction.
ULTIMATE SPROCKET WRENCH KIT
- 12” long wrench gives you more torque to get those thread locked sprocket bolts off easily
- Double ended 12mm & 13mm to fit all modern motocross, Enduro and dual sport bikes
- Dog leg wrench design allows wrench to easily clear rim edge and wide tires
- 8mm allen fits most Japanese bikes 8” long for extra leverage
- Torx T45 fits late model KTM and Husqvarna bikes, 8” long for extra leverage
- Vinyl coated handles to protect rim edge and give a non slip grip
- Makes routine sprocket bolt maintenance a quick and easy job
Brakes
Combines wrench and bleeder valve into one convenient and compact tool
- Fits most 8 mm bleeder nipples
- Bleeds brake systems and hydraulic clutch systems
- Internal check valve for fast easy bleeding
- Anodized billet aluminum handle with chrome moly steel body
- Compact size for tight spaces
- High quality internal seal
- Multi position handle
Suspension
Based on the wildly popular Race Tech Suspension Seminars taught by Paul Thede around the world, this step-by-step guide shows riders how to make their bikes handle like the pros. Thede gives the lowdown on all types of suspension, including cartridge and non-cartridge forks as well as dual-chamber and nitrogen-charged shocks.
The three forces of suspension, testing procedures, even the black arts of chassis geometry: Thede explains it all. The book provides step-by-step photos of suspension disassembly and assembly as well as a detailed troubleshooting guide for dirt, street and track.
Having the proper fork oil level is imperative to the handling of your bike. Setting the correct fork oil level is a snap with this fully adjustable gauge. The adjustable aluminum level plate can be set from 0 to 295mm. The oil reservoir has single milliliter markings up to 60ml.
Being able to accurately tune your forks by adjusting the oil level can make them better resist brake dive or bottoming. Oil level should be thought of as a fine tuning method to make your choice of spring rate work perfectly for your bike.
The features of this tool include 300 psi capacity, bleeder valve and T-handle plunger pin chuck. Swivel chuck has a 12" flexible hose. Comes complete with instructions, carrying box and Schrader valve extension (required on some Showa shocks). Nitrogen bottles available at any welding supply house.
Makes installation of your linkage bearings much easier. Also simplifies maintenance of those bearings.
- Allows placing bearing needles on bearing race while greasing linkage bearings
Exhaust
- Reduce exhaust sound by one to six decibels
- Works with DG V2 mufflers
- Easy installation; remove rear end cap and place Quiet Core in front of the spark arrestor
- Smaller diameter inserts are quieter but more restrictive; larger inserts are less restrictive but louder
- Each size is sold separately
Perforated W/ Block off Plate
(Gen2 O Series has Black Tip similar to V2)
The Chilly Exhaust Heat Shield is the most effective heat shield on the market. The innovative three piece design consists of a top shield attached to 2 rails with rivets and spacers. This reduces the contact area and slows down heat transfer. They have incorporated a patented, insulated reflective blanket on the underside of the shield to reduce radiant heat transfer. The included stainless steel clamp makes it simple to install.
We highly recommend a heat shield if you run soft luggage without hard racks.
FEATURES:
- Solid Top Shield - The logo is laser etched and there are no cutouts on the top shield. This prevents radiant heat from passing straight through to your luggage.
- Side Rails - By isolating these with spacers the heat conductive surface area to the top shield is reduced and slows down heat transfer.
- Radiant Heat Shielding - The reflective insulated blanket on the bottom of the shield is the real hero. This patented material won't be found anywhere else in the motorcycle industry.
- Stainless Steel Clamp - Slots have been provided in the side rails to make installing as easy as it gets.
- Brushed Aluminum - Lightweight and looks nice.
DIMENSIONS:
- Length 7.5" (190mm) x Width 3.5" (76mm) x Height 1" (25mm)
- Clamp fits any exhaust 3.5" - 5.5" (89mm - 149mm)
Don't get burned! Giant Loop's ingeniously simple and effective exhaust shield protects bags and bodywork from heat damage. The Hot Springs Heat Shield helps avoid the meltdown, preventing bags and side panels from touching your bike's exhaust. It's the lightweight, universal heat problem-solver for virtually any motorcycle exhaust system. Backed by a Limited Lifetime Warranty.
The latest in muffler packing technology. Spec 31 high performance muffler packing resists breakdown up to 1400°F, is universal, and is easy to install.
- Kits come in 2 lengths - 15" and 19"
- Pillows can be trimmed to length to fit different mufflers.
- Includes a cap stuffer to fill packable end caps.
Dualsport Kits
- Features an innovative design; made of polypropylene
- 10 bright white LED bulbs ensure visibility at night and high illumination while using low power consumption
- LEDs can be used as turn signals and will not heat up after prolonged use
- 12V 35/35W H4 bulb with LEDs; total wattage is 50
- Universal fitment with anti-vibration rubber straps
- Position of mounting points allow ample room for brake line/cable
- Universal mounting strap included
- DOT-ECE-SAE-TÜV compliant
This frame includes six, white, full-spectrum LED bulbs on a 6-inch strip for bright illumination of your license plate. It is made in a sturdy cast aluminum, and is powder coated with a durable black finish.
Outside frame dimensions are 7.25" in. wide by 4.2". Center to center mounting hole distance is 5.7 in. All mounting hardware is included.
These bright LED turn signals will bend more than 90 degrees without damage. Only 2 1/2" long.
- Sold in pairs
- Requires LED flasher unit
- Bikes with a single dash indicator require a diode kit
Clear lens, amber LED type lights. Short flexible stems. Very small, only 2 7/8" long. Requires a LED turn signal flasher to flash properly.
Triangle/Teardrop style signals with LEDs. Mounts on any flat surface to keep out of the way of brush, branches, and your exhaust system. Requires LED flasher or LED turn signal resistors to flash properly. Sold in a pack of 2 signals.
Made from a nylon and fiberglass composite, these mirrors are extremely durable. They easily fold out of the way when you head off-road.
Enduro Mirror 4"
Ideal for dualsport use, where you want a low profile when folded down. SAE spec convex glass gives a much greater field of view than flat glass.
ADV Mirror 3" x 5"
Adventure mirrors are designed for adventure riding where you want your mirror extended most of the time.
Mirrors mount to any 10mm perch. Mirror and arm included as shown in pictures.
Sold individually.
PSR dual sport mirrors come with a slightly convex mirror for a wider field of vision behind you. The round mirror is 4.25" in diameter while the oval is 3.75" x 3". These mirrors are easily adjustable and fold out of the way quickly with the 1" RAM mounts.
The RAM Ball Stud Base used for both mirrors will go into any standard 10x1.25 threaded mirror base.
Sold individually. If you need a set, please order 2.
You may have noticed after adding aftermarket turn signals (especially LED units) that your blink rate has significantly increased. OEM flashers are designed for standard bulbs which draw a few watts each, much more than typical aftermarket bulbs or LED signals. This device is an effective alternative to using load resistors because it consumes considerably less watts, consumes less space, and does not generate excessive heat.
The plug is exactly the same as the OEM unit making swap outs a cinch. No wiring changes, cutting and adding connectors. Just plug it in and you will have a steady flash at the DOT OEM rate regardless of what signal bulbs you use. It is an all solid state design and will blink correctly with loads all the way down to 0.1W / 0.01A.
Not for any DRZ400
This type of flasher is required for LED turn signals. For DC (battery) systems only. Includes 2 female connectors for universal fit.
Not for any DRZ400
Allows LED type turn signals (and low wattage flush mounts) to flash using a standard flasher unit. Connectors included. One kit works with 4 signals.
Convert your AC headlight output to charge a 12 volt battery. Handles up to 150 watts. Must be connected to a battery to function properly.
This regulator/rectifier requires ungrounded inputs from the lighting coil. Many lighting coils are internally grounded and will require modification often referred to as 'floating the ground'. This simply means cutting the grounded end of the lighting coil wire, extending it and running the extended end out of the case along with the original 'live' end of the lighting coil wire.
Luggage
The universal E-series adapter plate is designed to add a Givi Monokey topcase to most existing flat rear luggage racks. All necessary mounting hardware and installation diagram for attachment to generic tubular-steel flat rear luggage racks is included. This is a universal plate so making it work on your tail rack might need a little self engineering.
Typically installs quickly using simple hand tools. Mounts standard Givi Monokey topcases (ie E45 Elegant, E460 Delux, E52 Maxia), or the flat, stable surface can be used as a solid toprack when the topcase is not needed. Not for use with GIVI Monolock topcases. Made of durable molded nylon with a rugged black finish.
What's in the Box:
- GIVI E251 Adapter Plate
- (4) W-style Adapter Hooks
- Mounting hardware
- Installation instructions
The Hardcore Soft Rack has been specifically designed for smaller bikes that have very little support in the back for luggage.
They have incorporated two 7075 T6 aluminum support bars that also work as tire irons to increase rear carrying capacity.
The tire irons are hand forged and have a Type III hardcoat anodizing. You will receive two silver anodized tire irons.
The Hardcore soft rack also integrates easy access pockets to store your tire irons and access them without unloading your gear.
Construction Features:
- Heavy Duty Metal Cams
- Rubber cam buckle covers to protect your bike
- MOLLE Compatible Spacing
- Heavy Duty Nylon Webbing
- Integrated storage for support bars
- 7075 T6 Aluminum Support Bars Double as Tire Irons
- All Attachments Fully Adjustable
THE LUGGAGE RIGGING POSSIBILITIES ARE ENDLESS!
This kit will set you up with the full Green Chile Adventure Gear treatment. You will be able to haul up to four bags of your choice. One system that can be rigged for day trips and easily scaled up for an expedition or extended trip.
No expensive bags required. Any bag becomes motorcycle luggage.
Don't have a rack on your bike? No problem! The flexible soft rack system attaches easily to fenders, footpegs, sissy bars, or your existing rack. Just tighten up the sturdy cam buckles and you're ready to get rigging! Use the versatile combination of runner loops, tensioner straps, and velcro loops to affix any bag you please to any one of over 60 daisy-chain style contact points.
Contruction Features:
- 1" Tubular climb-spec nylon webbing
- Daisy loops along sides and rack surface
- Heavy Duty cam buckles on each corner
- Tensioner loops to keep your luggage secure as you travel
- Ability to carry two bags on the back and two bags on the side.
This Kit Includes:
- 1 Uprising Soft Rack Base
- 2 Soft Rack Side Straps
- 6 Cam Tension Loops
- 2 Ring Tension Loops
- 2 Ring Loops
- 2 Six Foot Runner Loops
- 4 Four Foot Runner Loops
TIRED OF LOOKING FOR A GOOD PLACE TO ATTACH TIE DOWNS AND STRAPS?
The Green Chile Adventure Gear Uprising Soft Rack is all about adding mount points to your bike. It adds over 60 mount points to the rear and sides of your bike and its quick and easy to install and adjust. The Uprising Soft Rack can be used with or without GCAG accessories, but when you add the soft rack as the base of your luggage system and combine a few other GCAG accessories you will have the world's first customizable and modular luggage system. You will not find a more versatile system anywhere else.
Don't have a rack on your bike? No problem! The flexible Soft Rack system attaches easily to fenders, footpegs, sissy bars, or your existing rack. Just tighten up the sturdy cam buckles and get rigging! Use the versatile combination of runner loops, tensioner straps, and velcro loops to affix any bag you please to any one of over 60 daisy-chain style mount points.
The GCAG Uprising Soft Rack is the flagship Green Chile innovation. This unique product is compatible with just about any motorcycle and soft luggage combination that you'd care to throw at it. Adventure bikes, dirt bikes, and crusiers...the Soft Rack does it all.
Specifications:
- 1" Tubular climb-spec nylon webbing
- Daisy loops along sides and rack surface
- Heavy Duty cam buckles on each corner
(patent pending)
These turn signal relocation brackets from ProMoto Billet provide an easy way to move the stock turn signal lights, useful if you find them getting in the way of your luggage configuration.
These brackets may utilize an existing hole in some of the rack side brackets, though many applications will require drilling or fabricating in order to mount properly.