Same-day shipping cutoff: Noon Pacific Time

It's never too early to start thinking about the next calendar photo contest.  Submit your photos here all year round to be considered in next years calendar and maybe win a prize too! 

WR250X

 

The Yamaha WR250X is a Supermoto offering that is more than capable of keeping up with the bigger stunt bikes.  Powering the WR250X is a fuel injected 249cc, liquid cooled, DOHC, single cylinder engine mated to a six speed transmission with a wet multi-disk clutch.  Weighing in just shy of 300lbs. wet, will make this bike very predictable and easy to handle on the street.

Chain Size:   Front Sprocket:   Rear Sprocket:   Front Tire:   Rear Tire:   Spark Plug:
520 x 108 13T 42T 110/70-17 140/70/17 CR9EK
           

 

Featured Products

Good News: There’s finally a plug & play LED headlight conversion kit for your 2008-2020 WR250R and WR250X!

This kit includes a sealed LED headlight assembly with plug & play electrical connection, adjustable powder coated steel mounting bracket set, and mounting hardware. 

Installation is a five minute, one beer exercise. If you can change a residential light bulb you will have no problem installing this conversion kit. We promise.

Please note that you will need to reuse your OEM upper headlight mounting grommet and two aim adjustment springs.  Or add new ones to freshen up your whole headlight unit.

Low Beam: 2,100 Lumens, 20 Watts
High Beam: 2,800 Lumens, 30 Watts
Operating Voltage: 10V-30V DC
Color Temp: 6,000K
Lifespan: >50,000 hours

Add Grommet
Add OEM Adjustment Spring
Ships same business day
$149.95

Engine

  • Kit includes aluminum cylinder with nickel-carbide coating designed with larger water jackets
  • Specially designed, high performance, hard anodized power valves (cannot use OEM)
  • Forged piston with molybdenum coating
  • Does not include cylinder head.

You will need to tune your EFI with something like the Power Commander V to get the most out of your Big Bore kit.

Add EFI Programmer, Dynojet Power Commander 6
Ships in 3-5 business days
$999.95

This is a completely rebuildable stroker crank (3mm additional stroke) turns your mild mannered 250cc motor into a 263cc trail shredding monster! OK, maybe not, but sure makes it a fun machine.

Want the COMPLETE package? Order a Big-Bore kit to go with your stroker! That will give you a 308cc ripper! That is 24% larger than the stock 250. This package includes the Athena Big Bore Kit plus the 3mm Hot Rods Stroker Crank with new Genuine Yamaha crank bearings.

You will need to tune your EFI with something like the Power Commander V to get the most out of your Stroker kit.

For stock bore Hot Rods highly recommends you use the Vertex Stroker Piston Kit.

Choose Package
Add Piston Kit - Forged Stroker 88.94/+4.00, Vertex
Ships in 3-5 business days
$202.95

If you're plannig to or already have a stroker crank setup in your Yamaha WR250R/X, you'll need this stroker piston.

Features:

  • All piston skirts are coated with a hi-tech Molybdenum Disulphite coating for faster break-in time and increased piston life
  • Cast Replica piston kits are gravity cast aluminum alloy (not forged) with 18% silicone content, which produces an extremely light but very strong piston
  • Forged Replica pistons are forged from 2618 aluminum for superior strength and durability
  • Forged High Compression pistons improve power and torque across entire rpm range
  • Forged Big Bore pistons increase engine’s displacement, torque, and peak horsepower
  • Forged Replica pistons are forged OE replacements
  • All pistons are heat treated with a T-5 hardening and tempering cycle
  • Replica pistons and all rings are OEM replacements
  • Kits include piston, rings, wrist pin and circlips
  • Two stroke replacement rings are sold individually (Example if your piston has two rings you will want to order two rings)
  • Four-stroke piston rings sold as a set
Ships in 3-5 business days
$241.95
WR250X '08 - '11

7.48mm diameter - Includes three valve shims of each size from 1.20 to 3.50mm in .05mm increments.

141 shims in total. 0.57 cents per shim! Does your local dealer have the shims you need?

Ships same business day
$114.95
Universal fit. May require additional adjustment or modification.

K&L® shims exceed the maximum of the Apparent Rockwell Hardness "C" scale. Shims average 47.0 compared to the 46.0 maximum.

These kits fit multiple brands and models, please verify correct size for your model before purchase.

13mm diameter - Includes two valve shims of each size 2.30, 2.40, 2.50, 2.55, 2.60, 2.70, 2.80, 2.90, 3.00 and 3.10.  In a shim box.

20 shims in total. From K&L.

KAWASAKI

Choose Shim Size
Ships same business day
$219.95

DRC is one of the leading manufacturers of silicone hose kits for motorcycles.

  • Durable silicone radiator hose for dirt bikes
  • Available for MX, ED racers and street dirt bikes
  • Smooth inner diameter allows for increased coolant flow
  • Printed white DRC logo. Available in red or blue colors
Choose Color
Ships in 3-5 business days
$62.95

Keep yourself COOL with a set of Moto Hoses. Moto Hoses are what you need to handle the heat that your bike is putting out whether you're pushing it to the limit or just stuck in slow city traffic.

Each Kit Contains:

  • Color matched carb vent hoses
  • Color matched fuel line
  • Color matched coolant overflow hose
  • Moto Hose is used by Rock River Yamaha and Honda of Troy motocross teams
  • Moto Hose for the WR250R/X is available in Blue or White
Choose Color
Please contact us for availability information
$74.95
WR250X '08 - '11

From Barnett, the number one name in motorcycle clutches since 1948, we now offer a complete high performance clutch set. This includes Kevlar friction plates, steel drive plates and stronger springs.

Ships in 3-5 business days
$149.95
WR250X '08 - '11

The Dirt Racer Complete Clutch Rebuild Kit is the ultimate package for your Yamaha, here's why:

'Stack Height' is the all important factor when renewing a clutch and riders are always best to buy a complete kit instead of separate single plates as sold by manufacturers. Replacing just the worn plate (or plates) may not even get close to rebuilding your clutch to its original stack height and all you get is clutch slip and the job has to be done again.

  • Complete set of stack height controlled anti-swell friction plates
  • The friction plates are forged allow with wide "Ear" construction to spread the load in the clutch basket and prevent "Dogging" (when the ears cut into the allow clutch basket) which causes a rough clutch, promotes slippage plus it ruins an expensive part of your engine
  • EBC unique alloy article impregnated clutch facings that wear longer and resist burning
  • 15% stronger heavy duty, shot peened clutch springs to clamp those plates together firm and strong for the life of your clutch
Ships in 3-5 business days
$109.95
WR250X '08 - '11

Hinson Clutch Plates available as a set of just Fiber Plates or just Steel Plates or as a complete set including both.

Hinson Clutch Components sells the best clutch components available in the world. Hinson equipped machines have won 224 National and World Championships in our 20 years of business.

  • Optimum hook up with minimum heat build up provides high performance
  • Developed with and recommended to enhance the performance of Hinson clutch baskets, inner hubs, and pressure plates
  • Exceptional production tolerances and flatness
  • All fiber plates use organic non-abrasive materials to avoid damage to rest of motor as plate materials break down and are circulated through engine by oil
  • Can be used with OEM baskets, inner hubs, and pressure plate
Choose Package
Please contact us for availability information
$149.95
WR250X '08 - '11

Choose standard bore top end, big bore top end or a complete gasket set for the standard bore motor. These are high-quality gasket sets from Athena.

  • The Complete Gasket set for the stock bore does NOT include Oil Seals. Must purchase those separately.
  • The Top End Gasket set for the stock bore includes all the necessary gaskets, rubber parts and valve stem seals for a complete top end rebuild.
  • The Big Bore Top End set includes a base and head gasket
Choose Package
Please contact us for availability information
$169.95
WR250X '08 - '11

If you need a new clutch, you probably need a new gasket to seal that cover when you are all done. Genuine Yamaha part.

Please contact us for availability information
$15.95
WR250X '08 - '11

This kit includes the large O-Ring that goes on the end of the filter and the small O-Ring that seals the hole just above that. Both are factory Yamaha parts.

Ships same business day
$13.95
WR250X '08 - '11

CNC machined oil filler cap with locking clip to keep it in place in the roughest conditions. The cap is pre-drilled and the locking clip is safety wired to the mounting tap with a section of silicon tubing, that will not melt or discolor, over the wire. First class all the way. Available in Silver, Black, Blue or Red.

Please contact us for availability information
$24.95

Providing unbeatable performance and exceptional value, Hiflo filtro is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.

You pay $3.90 per filter with our value 10-pack!

Ships same business day
$38.95
WR250X '08 - '11
  • Bolts are CNC-machined from high-quality aluminum
  • Embedded magnet helps keep bolt in place
  • Pre-drilled holes make for easy installation of safety wires
Ships in 3-5 business days
$25.95
WR250X '08 - '11

A 10-pack of drain plug sealing crush washers. Replace your sealing washer at every oil change to prevent a leak.

Ships same business day
$6.95
WR250X '08 - '11

Extra protection for your motor! Strong magnet at the end of the plug picks up metallic flakes in your oil, protecting your engine!

Ships same business day
$16.95
Universal fit. May require additional adjustment or modification.

Hardened chrome vanadium steel with built in rubber insert to hold spark plug steady.

Thin wall bi-hex sockets designed to access narrow spark plug holes.

Fits 3/8" square drive and hex drive, 14mm, 16mm, 18mm, 21mm.

Choose Size
Ships in 3-5 business days
$14.95
WR250X '08 - '25

E3 Resistor Spark Plugs

  • Unique electrode shape maximizes the power created by the spark plug – Diamond Fire technology
  • Electrode is a combination of performance and technology that results in an improved flame kernel shape
  • This flame front ignites the bulk air/fuel mixture faster, moves heat into the combustion chamber faster and creates a more localized pressure front for faster pressure rise during the cylinder power stroke
  • The result is more complete combustion and an improvement in engine performance
  • A truly premium performance plug
  • Sold individually, unless otherwise stated.
Add Anti-Seize
Ships same business day
$9.95
WR250X '08 - '11

Iridium spark plugs are made with premium quality materials.

Iridium plugs last longer than standard ones, meaning you won't have to replace them as often.

  • The ultimate in the evolution of spark plug technology and performance from an industry leader
  • The iridium electrode is 25% smaller than a platinum electrode, and it's just 1/4 the size of a conventional nickel electrode
  • Ultra-small diameter center electrode reduces voltage requirement and extends ignition system life
  • Metal shell plating has enhanced anti corrosion qualities

Sold individually, unless otherwise stated.

Add Anti-Seize
Ships same business day
$11.95

The genuine factory shop service and repair manual. This is the reference manual Yamaha dealers use in their service departments. It has all the necessary info to do any maintenance or repairs to your WR250R or X.

Ships same business day
$89.95
Universal fit. May require additional adjustment or modification.
  • Contains degree wheel, standard unit indicator, adjustable magnetic stand, and three positive stops (10 mm, 12 mm and 14 mm threads)
  • Can be used to install and adjust timing of any cam
  • Wooden carrying case
Ships in 3-5 business days
$315.95
Universal fit. May require additional adjustment or modification.

Made from medium carbon steel with hardened jaws. It features spanner pins and the jaws open up to 5" wide. It's ideal for holding clutch hubs, flywheels, gears, sprockets, etc. Made by Motion Pro.

Ships same business day
$32.95
Universal fit. May require additional adjustment or modification.

This tool is designed to separate vertically split crank case halves on two and four stroke engines. Adjustable arms allow it to be used on multiple bolt patterns found on a variety of makes and models of motorcycles. Industrial grade steel construction with black oxide finish for long service life. Comes with 8mm mounting bolts and 6mm adapters. Protective carrying case included.

Please contact us for availability information
$112.95

Works Connection Billet Plugs for your left side case. These blue plugs includes both the timing mark plug and the crankshaft access plug.

Please contact us for availability information
$46.95
WR250X '08 - '11

Unless you have managed to bash yours on a rock, this is an item of pure bling, but hey, there is nothing wrong with that! This CNC Oil Filter Cover is made from A7009-T6 aluminum with the 'Zeta' logo machined into the front and anodized in blue to really stand out on your Yamaha. It's also lighter than stock.

Ships in 3-5 business days
$67.95
Universal fit. May require additional adjustment or modification.

For easy removal of recessed oil filters.

Conical point screws pierces and grabs the metal end cap of the filter.

reduces potential damage to the engine cases.

NOT for use on re-usable oil filters.

Ships same business day
$13.95
Universal fit. May require additional adjustment or modification.

A 3-pack of easy to apply strips measure the temperature of engine, suspension, and radiator components. Temperature range 146° to 248°

Ships same business day
$14.95
Universal fit. May require additional adjustment or modification.

Thread Chasers are designed to clean and re-cut damaged aluminum threads.

This kit contains the two sizes most common on metric motorcycles, M6x1.0 and M8x1.25.

Thread Chasers also remove dirt and metal shavings that become captured in thread grooves.

Uses 8mm or 10mm hex sockets, a Must for all tool kits.

Ships same business day
$5.95
Universal fit. May require additional adjustment or modification.
  • 26 straight blades
  • SAE and metric markings
  • Check for clearance on valves, ignition points etc.
  • Includes 26 blades varying in thickness from .0015"/.038 mm to .025"/.635 mm
Ships same business day
$12.95

Fuel and Intake

The Power Commander 6 fuel injection tuning device allows you to optimize your fuel and timing curve (where applicable) giving you the confidence to roam freely. With fine tune adjustability and multiple inputs, the Power Commander 6 will keep your vehicle running at its full potential letting you concentrate on the journey ahead.

Featuring a plug-and-play setup, Power Commander 6 can be installed discreetly underneath your seat, cowl, dash or other location ensuring your ride looks as good as it runs. Removing the device reverts your vehicle completely back to stock. With the ability to store and switch between two maps on-the-fly  (via the map switch accessory) and connect to various Power Commander accessories such as the Autotune, Quickshifter or POD-300, the Power Commander 6 gives you features and functions that provide you with the ultimate ride.

All PC6 models have an end-user adjustment of +/-15 in the FUEL table and +/- 8 in the timing table (if applicable). This adjustment is on top of the values that are in the BASE map loaded to the device. This BASE map can be any of the available maps from the Dynojet website, or those you may have received from a third party.

  • Compact design for discrete placement & easy uninstallation to revert to stock settings
  • Easily change & upgrade tunes as you upgrade parts
  • Comes with Power Core software that connects dyno runs with our EFI Tuning Devices to unlock your ride’s potential
  • Pair with other Power Commander accessories like the Autotune, Quickshifter or POD-300
  • Analog input allows you to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature
  • Easily connects to your computer via USB
  • Each cylinder can be mapped individually and for each gear, giving riders more granular control
  • One year warranty
  • Proudly made in the USA
Ships in 3-5 business days
$516.95
WR250X '08 - '11

The EJK evolved out of the need to address the ever-increasing complexity of factory fuel injection. For the newcomer to the market or professionals wanting an easier method for tuning fuel injection, the EJK is a customizable solution for the rider that wants to take control of their tuning needs.

This unit is a piggy-back EFI controller because it does not replace the stock ECU, but rather monitors the signals to the injectors and makes fuel adjustments based on the mode settings. The GEN 3 has a push button interface allowing access up to 6 different modes to allow for quick fine tuning by the end user without needing a computer.

Key Features:

  • No computer or dyno needed!
  • Plug and play, simple to install, base settings preset
  • Unique load based technology
  • Full range tunability available
  • Does NOT interfere with stock ECU operation
  • Simple push button adjustment interface
  • Water-resistant 
  • 2-Year warranty
  • Compact size - 2.2" H x 3.4" W x 0.5" D
Ships in 1-2 weeks
$249.95
Universal fit. May require additional adjustment or modification.

Genuine Keihin spring, washer, and oring for the fuel screw of FCR and FCR MX carbs.

Just the parts…
Fuel screw spring, washer, o-ring (fuel screw not included)

Ships in 3-5 business days
$8.95
WR250X '08 - '11
  • Increased air flow over the stock air filter
  • Designed to increase horsepower and throttle response
  • Easily fits inside the factory air box
  • Larger surface area over foam filters which offers longer service intervals in dusty conditions
  • Four layers of premium cotton gauze provides outstanding filtration
  • Washable & re-usable, never wears out
  • One filter will last the lifetime of your bike
Add Air Filter Care Kit
Ships same business day
$70.95
  • Unique triple stage foam filter designed for the most extreme conditions
  • Increased protection against silt, water, and sand
  • Allows for extended filter service intervals
  • Can be cleaned, re-oiled, and re-used like a 2-stage filter
  • Neoprene base gives superior sealing to airbox
  • Includes resealable bag for easy oiling and storage
Ships in 3-5 business days
$24.95
WR250X '08 - '11

Dual stage foam: 2 different pore sizes create more trapping area for even the smallest dust particles. Flame laminated foam: Both "Stages" are not glued but heat sealed to provide maximum air flow. Light color foam makes it easier to see where the filter oil has covered and where it has not.

Please contact us for availability information
$30.95
WR250X '08 - '11

Twin Air's patented design, high quality materials and superior construction deliver unbeatable performance and protection - and make Twin Air Filters the hands-down choice of more World and National Champions than all other filters combined.

Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles-without restricting airflow!

Ships same business day
$30.95
WR250X '08 - '11
  • Designed to fit in the factory air box exactly like original filter
  • The best selling replacement air filter for competition motorcycles and ATVs
  • Unique two stage design allows for easy and complete cleaning
  • Dual layer of foam, can be serviced separately
  • Thin Ultra Seal base is virtually impossible to tear and has a built-in "Grease Groove"
Ships in 3-5 business days
$39.95
Universal fit. May require additional adjustment or modification.

Sold in 6 packs

  • Compatible with many air filter boxes. Easy to install by drilling 1’’ holes in airbox housing and snap fitting vents in.
  • May be cleaned and re-oiled
  • More air flow allows you to add more fuel to your intake mixture, increasing performance.
  • 1" Diameter

Not legal for use on pollution controlled vehicles in the state of California.

Ships same business day
$14.95
Universal fit. May require additional adjustment or modification.

Quick release one-piece clamps that saves space. These are great for fuel lines, controlling wires, and can be used many times.

Comes with 4 each of 8mm, 9mm 10mm, and 12mm.

No special tools needed, from Helix Racing.

Ships same business day
$9.95

Gas Tanks

WR250X '06 - '11

Designed to enhance the appearance of your motorcycle, yet provide greater riding distance per tankful. Larger capacity than stock, yet very slim and sleek. Perfect for the dunes or the race track! These tanks are made with crosslinked polyethylene for extra strength and durability.

Natural color is recommended to easily see the fuel level in the tank. Includes cap and fuel petcock.

Ships in 3-5 business days
$411.95
WR250X '08 - '16

IMS Products 'Adventure Tank' for the Yamaha WR250R/X. They call this an Adventure tank because it maximizes your capacity preparing you for those extended trips without the need to stop and fill up. This tank has a 2.75 gallon advantage over the stock fuel tank and it handles it well.

IMS made this tank to replace the stock radiator shrouds and keep the fuel down low for a lower center of gravity, improving the handling and stability of the bike. They also have installed a lift pump to allow the stock fuel pump to stay in the standard position while efficiently utilizing the entire capacity of the tank. It is available in Natural, Black, Blue, Red and White.
*Graphics For This Tank Are No Longer Available*

Wing Tank - Does Not Use OEM/Stock Shrouds

Ships same business day
$517.95
Universal fit. May require additional adjustment or modification.

TechSpec’s Motorcycle Tank Grips were developed to improve body, bike control and increase riders comfort. Gripping your motorcycle between your knees or thighs improves overall control of your ride by better securing your body weight and seat position under the forces of braking, cornering and acceleration while also relieving pressure from your wrists, elbows, shoulders and lower back giving you increased control and a more comfortable, safer ride. Snake Skin is a thin, .125” medium durometer “rubber” material that offers a secure, comfortable grip, durable protection and a clean stock look.

This universal precut kit includes left and right tank grips. (8" X 3") Triangle

Ships same business day
$29.95
Universal fit. May require additional adjustment or modification.

If you're like us, you hate the long floppy vent hose hanging off the cap of your aftermarket tank.

This one-way vent cap replaces the long hose with a short one only about 2" long. It allows air into your tank but prevents fuel from sloshing out.

Machined from billet alloy and anodized for good looks.

  Not for stock fuel tanks!

Ships same business day
$11.95
Universal fit. May require additional adjustment or modification.

Security for your fuel tank. Includes 2 keys. Internally vented with a check valve that prevents spillage in case of a tip over.

  Fits Acerbis, IMS and Safari tanks only.

Ships same business day
$39.95
WR250X '08 - '11

A replacement gas cap for your IMS tank. Newly redesigned to resist damage from new fuel additives that were hard on the seal in the old style cap.

Ships same business day
$16.95
WR250X '08 - '11

This CNC cap will replace the stock gas cap on the stock tank. You do need some parts from the stock cap, so don't throw it away yet! It is not difficult and this kit includes the additional hardware required. Also included is a vent tube with a matching cap.

For use on STOCK TANK ONLY! This is NOT a locking cap.
Does not fit California model DR650

Ships same business day
$72.95
Universal fit. May require additional adjustment or modification.

The small size and right angle hose barbs make this filter easier to fit into the small space between your fuel petcock and carburetor. Filter body is only 7/8" diameter. Straight filter is 2" long, 90 degree filter is only 1-5/8" long.

Choose Type
Ships same business day
$24.95
Universal fit. May require additional adjustment or modification.

This filter is meant for 5/16" fuel lines. Only 1/2" thick it is small enough to fit just about anywhere.

Choose Pack
Ships same business day
$24.95
Universal fit. May require additional adjustment or modification.

Fuel supplies can be sketchy at times. This filter lives in your tank to trap dirt and debris as it is poured into the tank. Features a custom shaped adapter that fits securely under the gas cap, creating a leak-proof seal. If it stays out of your fuel, it can't get into the carburetor! Created by the filter experts at Twin Air, this filter fits IMS,  Acerbis and Safari brand gas tanks.

Choose Tank Type
Ships same business day
$35.95
Universal fit. May require additional adjustment or modification.

Ordering new fuel line? How about a set of fresh zinc plated clamps to go with it?

These will be sure your fuel line stays connected. A pack of 8 clamps in 2 sizes to fit most 1/4 or 5/16 fuel hose.

Ships same business day
$5.95
Universal fit. May require additional adjustment or modification.

Hose reducer to go from 5/16" line down to 1/4" line. Many bikes have 5/16" carburetor spigots but most aftermarket petcocks are 1/4". This solve the problem of mismatched sizes. Solid brass construction. Can be used to route or repair fuel lines, oil lines or air lines. Barbed ends provide a secure fit.

Ships same business day
$8.95
Universal fit. May require additional adjustment or modification.

All of these lines are stronger and more durable than vinyl fuel lines and are resistant to swelling, UV light, as well as hardening and cracking.

Five-layer Greenshield® Barrier Technology cuts vapor loss and saves fuel, making it safe for the environment and fuel efficient.

1. Barrier tube - provides high heat and corrosive liquid resistance.
2. Greenshield® barrier - patent-pending technology provides the lowest permeation in the industry.
3. Adhesion layer - secondary protective barrier.
4. Reinforcement layer - spiral textile reinforcement provide strength and pressure resistance.
5. Cover - protect underlying components.

  • 30" length, 1/4" ID
  • Temperature Range: -40°C to +125°C (-40°F to +257°F).
  • HNBR tube with thermoplastic barrier and CPE cover; reinforced aramid fiber.
  • Oil, heat, ozone, and abrasion-resistant cover.
  • Multi-fuel compatibility. Unleaded gasoline, methanol, ethanol (E10, E15, E85)
  • PSI rating: 35 to 50.
  • Not for use with fuel-injected models
Select Product
Ships same business day
$9.95
Universal fit. May require additional adjustment or modification.

All of these lines are stronger and more durable than vinyl fuel lines and are resistant to swelling, UV light, as well as hardening and cracking.

Five-layer Greenshield® Barrier Technology cuts vapor loss and saves fuel, making it safe for the environment and fuel efficient.

1. Barrier tube - provides high heat and corrosive liquid resistance.
2. Greenshield® barrier - patent-pending technology provides the lowest permeation in the industry.
3. Adhesion layer - secondary protective barrier.
4. Reinforcement layer - spiral textile reinforcement provide strength and pressure resistance.
5. Cover - protect underlying components.

  • 30" length, 5/16" ID
  • Temperature Range: -40°C to +125°C (-40°F to +257°F).
  • HNBR tube with thermoplastic barrier and CPE cover; reinforced aramid fiber.
  • Oil, heat, ozone, and abrasion-resistant cover.
  • Multi-fuel compatibility. Unleaded gasoline, methanol, ethanol (E10, E15, E85)
  • PSI rating: 35 to 50.
  • Not for use with fuel-injected models
Choose Size & Type
Ships same business day
$9.95
Universal fit. May require additional adjustment or modification.

Need to mount two containers? A water and a fuel? Two waters? Already have a RotoPax Mount for a single container? Get this extender to work in conjunction with a pack mount and that will be no problem! Single mount, two containers.

Ships in 3-5 business days
$43.95
Universal fit. May require additional adjustment or modification.

RotoPax holder made to mount a single Fuel and/or Water container.

Need to mount two containers? A water and a fuel? Two waters? Get the extender which allows you to stack two containers no problem! Single mount, two containers

Add Extension Mount
Ships same business day
$52.95
Universal fit. May require additional adjustment or modification.

RotoPax holder made to mount a single Fuel and/or Water container.

This unique design adds strength and provides extra tightening power.

Use with included base plate or remove plate to attach mount direct by bolting up through the bottom or down through the top.

Ships same business day
$62.95
Universal fit. May require additional adjustment or modification.

RotoPax are Rotational Molded - the process which produces indisputably superior products.

  • Thicker walls and stronger construction
  • Bright colors that are less prone to fading
  • Extra threads, thicker walls, and sure-seal gasket guarantee no leaks

Need to mount two containers? A water and a fuel? Two waters? Finally, you can stack multiple packs together! Use in conjunction with a pack mount. You will need to purchase the Single Mount as well as the Extender.

Choose Container
Add Container Mount
Add Extension Mount
Ships same business day
$87.95
Universal fit. May require additional adjustment or modification.

Auxiliary fuel tanks mount to handlebars, forks, or rear racks.

  • Suitable for minis, trials bikes, full size bikes, and anywhere else a little extra fuel is needed.
  • Each tank includes a siphon kit that connects the tank to the main fuel tank and automatically siphons fuel while the bike is being ridden.
  • With this design, the auxiliary tank empties first, before the main tank.
  • Does not interfere with headlight, handguards, rear seat, etc.
Add Fuel Stabilizer
Ships in 3-5 business days
$112.95
Universal fit. May require additional adjustment or modification.

This Super Siphon has  a (1/2 inch x 6 foot) long hose, which makes it quite easy to transfer fuel from one bike to another! Simply, shake the hose to prime it and get fuel moving. The hose is resistant to gasoline and any other hazardous chemicals. Roll it up, stuff it in your bag and you will be very happy whenever you need it.

Ships same business day
$22.95

Controls

Universal fit. May require additional adjustment or modification.

Comfortable Oversize (or Fat Bar) Handlebars.

  • Silver in color. 
  • Constructed of high-quality 7065-T6 aluminum
  • Lighter and stronger than regular bars
  • No-crossbrace allows flex to reduce shock and rider fatigue
  • Oversize 1-1/8" diameter base reduces to 7/8" to allow standard-size controls/grips
  • Etched alignment marks for fast and accurate positioning
  • Flex Series pad included
  • Works with stock controls and cables.

For bikes with factory 7/8" handlebars these will require the use of a 7/8 to 1-1/8  adapter (sold separate).

Ships same business day
$79.95
WR250X '08 - '11

ProTaper's ADV handlebars give you a bar taller than most with extra space on the control portion of the bar. These bars provide an additional 20mm of space next to where your levers and throttle are located for your GPS, phone cradle, auxiliary switches, etc . They come in Adventure (which is taller than stock) and Adventure High (which is even taller).

These  are oversize bars, which means they are are 1 1/8", not the smaller 7/8" diameter. Therefore some bikes will require a adapter and there are several available to select from.

Using the same manufacturing techniques and materials as ProTaper’s industry-changing 1⅛" motocross handlebar, the EVO Adventure is specifically designed to provide adventure/touring riders with the increased comfort and control they need. With over 8" of straight section in the control areas, mounting vital components is made easier than ever. With its premium 7000 series aluminum alloy construction and computer-profiled four millimeter-thick wall design, the EVO Adventure Handlebar is up to 25% lighter and 45% stronger than competing handlebars.

  • 1⅛" tubing at the clamping area
  • Exclusive 4 mm-thick 7000 series aluminum alloy for superior tensile and yield strengths
  • Optimum balance between fatigue life, impact strength, and impact-absorbing flex
  • High-tech shot peened, stress-relieved, and anodized finish for unmatched durability
  • Independent lab tests show that the EVO Handlebar leads the market in fatigue life
  • Epoxy inner coating resists corrosion
  • Chemically applied cut lines and alignment grid are scratch- and peel-resistant
  • Plastic bar end plugs keep the elements out and provide a stronger base for grip ends
  • Weighs only 1.55-1.7 lbs. (720-780 grams), depending on bend
Backordered: Temporarily substituting similar high-quality handlebar. Please leave note if you prefer to wait for ProTaper.
$99.95
Universal fit. May require additional adjustment or modification.

These 7/8" bars fit in the stock clamps and raise your grips a couple inches. They look great too!

WidthHeightRise
813mm160mm104mm
Clamp AreaSweepControl Area
236mm100mm199mm
Please contact us for availability information
$74.95
Universal fit. May require additional adjustment or modification.
  • 4.75" wide,
  • Raises handlebars 2 inches and allows fore/aft position adjustment
  • Provides dual pivot points for optimal bar positioning
  • One piece design is made from solid aluminum for superior strength
  • Available for 7/8" - 7/8" or 7/8" - 1 1/8" bars
  • Requires 7/8" factory bar clamps on bike

Choose Bar Size
Ships same business day
$99.95
Universal fit. May require additional adjustment or modification.

These versatile Risers allow you to clamp a 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1- 1/8" aluminum "fatbar". If you are thinking of going to a fatbar after you bend your stock set or just want the versatility and option to run any bar, this is the riser to go with. Reducers lock into risers to insure no slippage between components.

These risers use 8mm bolts. Always check and confirm that your bike has adequate cable and brake line length before installing any handlebar risers.

Anti-Vibration Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations (in these cases we recommend using standard pivoting risers).

Choose Color
Ships same business day
$171.95
Universal fit. May require additional adjustment or modification.

This unique design from Rox allows you to move your bars either closer (1" up and back) or further away (1" forward and 1-1/4" up) depending on rider preference. These risers have an oblong mounting hole so that they will fit virtually any triple clamp with 8mm bolts. A set of reducers lock into the risers ensuring no slippage whether you have a 7/8" or 1-1/8" bars.

Because these are offset there may be limited clearance between the gas tank and the risers when the bars are fully turned on some models, mainly when mounted to move the bars closer.

Choose Color
Ships same business day
$99.95
Universal fit. May require additional adjustment or modification.
  • Adapt 7/8" bar mounts to accept oversized 1-1/8" handlebars
  • An economical alternative to replacing expensive top triple clamps
  • Include mounting bolts.
  • Raises handlebar 20mm.
  • Polished aluminum
Ships in 3-5 business days
$49.95
Universal fit. May require additional adjustment or modification.

Protect your thumbs from blisters caused by riding on the inside of your grips.

Sold in Pairs.

Ships in 3-5 business days
$4.95
Universal fit. May require additional adjustment or modification.

ProTaper Pillow Top Grip with 3-D (Tri-Density) Technology.  Try the grip with the technical advantage of three dedicated rubber compounds.

The difference between the original Pillow Top and the Pillow Top Lite is the overall diameter of the grip surface. The Lite offers a smaller diameter so the grips don't feel as large reducing fatigue in your hands while riding.

  • Vibrasonix pillow top reduces vibration and cushions impact. 
  • Inner core compound perfects the bonding interface with bars. 
  • Anti-Rip Tip™ uses denser compound to increase life of grip. 
  • Designed to self-clean and shed mud away from outer surface. 
  • Tacky gel-like surface compound is perfect for the trail and MX.
Add Grip Glue
Backordered: Waiting for stock from suppliers to fulfill orders placed on or after April 2024
$13.95
Universal fit. May require additional adjustment or modification.

ProTaper Pillow Top Grip with 3-D (Tri-Density) Technology.  Try the grip with the technical advantage of three dedicated rubber compounds.

  • Vibrasonix pillow top reduces vibration and cushions impact. 
  • Inner core compound perfects the bonding interface with bars. 
  • Anti-Rip Tip™ uses denser compound to increase life of grip. 
  • Designed to self-clean and shed mud away from outer surface. 
  • Tacky gel-like surface compound is perfect for the trail and MX.
Add Grip Glue
Ships same business day
$13.95
Universal fit. May require additional adjustment or modification.

Highly efficient design delivers warmth faster than traditional heated grips.

Choose from the standard five level push button temperature controller, or the LCD display controller which shows the selected heat level and available battery voltage.

Choose Controller
Ships same business day
$66.95
Universal fit. May require additional adjustment or modification.

These heated grips from Koso have been tested by us and we can say they will keep your hands warm and give you the grip you need in off road conditions, thanks to the full diamond grip design.

  • Clamp-on grips do not need adhesive
  • External temperature controller with 5 heat levels
  • For use with twist throttle; includes interchangeable throttle cams
  • Requires 35W and draws 2.5 amps per pair; low voltage shut off
Ships in 3-5 business days
$155.95
Universal fit. May require additional adjustment or modification.

The Apollo Heated Grips are designed with an integrated adjustable thumb switch, which allows them to easily fit on any kind of motorcycles on the market. The integrated thumb switch gives control to the rider to adjust the temperature level while keeping hands on the bar for a safer ride.

Its wide temperature setting range will keep the rider comfortable under the cold riding conditions.

The 5 color LED display will enhance the visual look of the heated grips and will allow the rider to quickly know at which heat level the grips are set.

This system will also detect if the battery voltage is too low and will automatically shut down the heated grips in order to make sure the rider have enough power to start the engine or use the motorcycle.

Specifications:

  • Integrated thumb switch designed for easy installation and control.
  • “Plug & Play” wiring connections to shorten the installation time.
  • Wide temperature settings for various weather conditions.
  • Low Battery Warning protection to ensure the motorcycle has enough power to start.
  • 5 color LED Indicators for the rider to quickly know in which heat level the grips are set.
Ships in 3-5 business days
$144.95
Universal fit. May require additional adjustment or modification.
  • Ergonomically designed
  • Medium-density Thermoplastic Rubber (TPR) compound provides excellent feedback and control, without sacrificing durability
  • Full diamond pattern for an unparalleled feel in both wet and dry conditions
  • Inner diameter optimized to keep grips secure in any conditions
  • 115mm overall length; fit 7/8" bars and throttle sleeves
Ships same business day
$10.95
Universal fit. May require additional adjustment or modification.

These grips feature a thicker design that dampens vibration. The soft shoulder allows ease of movement. Three wire-tie grooves are molded into the grip to make securing them a breeze. We think they are great!

Add Grip Glue
Ships same business day
$12.95
Universal fit. May require additional adjustment or modification.

Each pattern is available in three advanced synthetic rubber compounds. This means you can have the optimum combination of strength, tackiness and shock absorption to suit every riding condition and individual style. Soft grip is extremely soft, giving you a very comfortable ride, great feel and reduces the chance of blisters; however, because the grip is so soft, it wears quickly. Medium is a compromise between firm and soft. Firm grip has the same feel as a stock grip, it is very strong and has very good resistance to tearing and abrasion. Half Waffle has waffle pattern in finger area for traction and diamond pattern on palm side to reduce blisters. Full Waffle: designed after the CR Honda® grip.

Add Grip Glue
Please contact us for availability information
$16.95
Universal fit. May require additional adjustment or modification.
  • Feature the classic Vans waffle sole pattern with a subtle domed center section for improved ergonomics and vibration dampening
  • 125mm in length
  • Fit 7/8" bars
  • Sold in pairs
Add Grip Glue
Ships same business day
$19.95
Universal fit. May require additional adjustment or modification.

This little jewel reduces hand fatigue and cramping on long rides or daily commutes. The Crampbuster is not a throttle locking unit but, rather a simple clip-on device which allows you to relax your grip while riding.

Ships same business day
$10.95
Universal fit. May require additional adjustment or modification.

The Go Cruise cruise control mounts over the throttle grip and rests on the brake lever to hold your throttle open, allowing you to stretch and rest your hand on long rides. Installs and removes in seconds with no tools. You can roll off the throttle manually to disengage the Go Cruise.

Ships same business day
$19.95
  • Machined and knurled 6061 billet aluminum
  • Removable end cap for easy hand guard installation
  • Works with standard housing
Ships same business day
$44.95
WR250X '08 - '11

Opens your throttle 15% faster. No more 'double handfuls' to get it wide open. Removable end cap for bikes with hand guards.

Ships same business day
$36.95
WR250X '08 - '11

A set of polished aluminum replacement brake and clutch levers.

Ships in 3-5 business days
$22.95
WR250X '07 - '20

- Pivot CP clutch and brake lever set for Trail models.
- Lever folds outward to prevent breakage in the event of a crash.
- Lever adapter is ultra precise CNC machined out of high grade aluminum for super light weight design.

Please contact us for availability information
$117.95
Universal fit. May require additional adjustment or modification.

Attach this over your brake lever and hand grip, squeeze the brake lever, pull the locking bar in and lock the black portion down. This creates a locked front brake, making parking safe and secure with about 5 seconds of effort.

To unlock the BrakeFix, you just lift the back of the black hooking portion to release it. This takes about 2 seconds. Perfect for use with Snapjack type stands or just parking on an incline.

Ships same business day
$19.95
WR250X '08 - '11

Forged aluminum, black anodized arm and Knurled CNC aluminum shift tip.

Ships in 3-5 business days
$28.95
WR250X '08 - '11

A high quality replacement clutch cable.

Add Cable Lubricant
Ships in 3-5 business days
$21.95
Universal fit. May require additional adjustment or modification.
  • Handy, compact kit for on-the-go emergency throttle, clutch and brake cable repairs
  • Includes 2 different diameter 6.5 long inner cables and an assortment of cable ends
Ships same business day
$19.95
WR250X '08 - '11

A quality set of replacement throttle cables from Motion Pro

Ships in 3-5 business days
$28.95
Universal fit. May require additional adjustment or modification.

Sold individually.

The Adventure Kit is perfect for adventure and touring bikes where the mirrors are kept up most of the time. This mirror offers the widest field of view, and is ideal for riding paved and dirt roads.  The 6 inch arm is a little longer than anything else on the market, for great visibility on loaded bikes.

  • Made from super tough glass reinforced zytel
  • Reflector Dimensions: 5.25" x 3.5" (135mm x 95mm) 
  • Overall mirror length: 7" (175mm) (not including arm mount)
  • Convex lens meets SAE and CE specifications 
  • Mirror mounts to any 10mm perch.

The new Doubletake ball is oversized, and high quality nitrile rubber surrounds an aluminum base that won't degrade under extended compression. 

The Doubletake Base Kit includes bolts to thread into every application (even reverse thread Yamaha's), without adapters. 

ADV 6" Arm Mirror 

Kit Includes: 

  • 1 Adventure Mirror
  • 1 6" arm
  • 1 Ball Stud
  • 3 Adapters (1Base Extension, 1 Reverse-Thread Adapter, 1 BMW Adapter)
Choose Style
Ships same business day
$71.95
Universal fit. May require additional adjustment or modification.

Sold individually.

Enduro Mirror 4"

The Enduro Kit is a great option for your street legal dirtbike if you fold away your mirrors often. The longer stem helps the reflector fold behind the headlight and gives good visibility when extended. 

  • Made from super tough glass reinforced Zytel.
  • Reflector diameter: 4" (100mm)
  • Overall mirror length 8.25" (215mm) (not including arm mount)
  • Convex lens meets SAE and CE specifications

Their Doubletake Arm 3.5" is perfect for aggressive riders- long enough to see, but small enough to tuck away.

The new Doubletake ball is oversized, and high quality nitrile rubber surrounds an aluminum base that won't degrade under extended compression. 

The Doubletake Base Kit includes bolts to thread into every application (even reverse thread Yamaha's), without adapters. 

Choose Style
Ships same business day
$62.95
WR250X '08 - '11

This adapter will give you more mirror choices.

Yamaha mirrors have reverse threads on the right (throttle) side of the handlebars. This adapter allows you to mount a mirror with standard 10mm threads on the right side of your handlebar. This opens up many options for your mirrors, choose any 10mm mirror for your Yamaha.

  • Torque spec: 5 Nm
Ships same business day
$9.95
Universal fit. May require additional adjustment or modification.

Can't see past your shoulders? These mirror extenders will get your mirrors higher and farther out for a much better view of the road behind you.

  • Aluminum extension with Japanese 10mm x 1.25 male and female threads
  • Works with standard Ball Stud Base to offer clearance in some applications
  • Torque spec: 5 Nm
  • Sold in pairs
Choose Length
Ships same business day
$12.95
Universal fit. May require additional adjustment or modification.

Replaces all 2 bolt style clutch/brake lever mount clamps on your clutch or brake lever holder. Can help save space on short bend handlebars.

Ships same business day
$24.95
Universal fit. May require additional adjustment or modification.

With the split back, you don't need to remove your grip or throttle tube, just put it on and tighten 'er down. Put the mirror in and hit the road. Clean and simple.

Ships same business day
$11.95
Universal fit. May require additional adjustment or modification.

This new mirror can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price.

Fits either left or right side and includes handlebar mount.

Sold individually

Ships same business day
$29.95
Universal fit. May require additional adjustment or modification.

This new mirror screws into your stock mirror mount but can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price. Fits either left or right side.

Sold individually. If a set is needed, order two.

  All Yamaha's will need a mirror adapter if you have the stock perch.

Ships same business day
$22.95