Many suppliers are experiencing HUGE increases in demand and Covid related supply chain delays.

The quickest way to get your item is to place your order now which guarantees your place in line.



Designed to seal completely around the cable housing and stop all those messy leaks. With the unit closed and sealed around the cable, your cable gets better lubrication and you waste less lubricant.

  • Works on most cables with a 4mm - 8mm O.D. housing.
Add Cable Lubricant

Includes degree wheel, dial-gauge, multi-position stand, extension, 3-sizes of positive-piston stops, and a handsome wooden carrying case.


A handy pocket size slide calculator from Mikuni to help you calculate jetting changes due to temperature and elevation changes. Will work for single and multiple cylinder machines whether 2 or 4 stroke. Also includes a guide for determining rich or lean conditions.

  • Accurately and quickly measures chain slack
  • Two scales measure both chain slack and chain to swingarm clearance
  • Setting chain slack properly dramatically improves chain life
  • Lightweight compact design fits easily in your tool box or road kit
  • Works on most street and dirt bike applications up to 75mm chain slack
  • Made from engineered nylon with aluminum measuring scale
  • Anodized laser-etched precision measuring scale
  • Refer to your owner's manual for proper chain slack and procedure
  • Patent pending

Designed for quick and accurate alignment, this tool clamps squarely to the rear sprocket so the alignment rod can indicate sprocket alignment with the chain.


Can break or rivet chains from #35 to #530 like a pro.

kit includes a 2mm, 3mm, and a 4mm pin to fit most chains.

kit includes press plates,and all necessary riveting pieces and comes in a durable plastic case.

NOTE: when breaking a chain, YOU MUST grind the heads off of both pins on a link first.


Here is a tool to help you remove a few links from a chain that is too long. A great tool to have in your tool box.


  Note! The head of the pivot pin you are going to remove must be ground down level with the side plate before using this tool to push it out. Failure to do that will cause damage to the tool that is not covered by any warranty!


This brush has 2.25 coils of 360° chemical-resistant nylon bristles to make it the fastest, most effective, precise and systematic method for giving your chain a thorough cleaning. It will help the performance and life of the chain, sprockets, and the engine. This brush will fit any 400 or 500 series chains.


Innovative design that cleans chain from 3 angles at once. Long handle keeps fingers and hands away from chain and sprockets.

  • Will not harm O-ring chains
  • Easily adjustable for all chain sizes
  • PBR = press, break, rivet
  • Innovative design will press, break and rivet 520, 525 and 530 chains with one convenient tool
  • Versatile design will remove chain pins, press master-link plates and rivet hollow nose and soft nose (quad stake) master link pins on O-Ring and non O-Ring type chains
  • Easy-to-use design allows you to change tool functions by simply moving the position of the anvil block
  • Indexing letters on movable anvil and body ensures correct tool configuration; simply line up the letter on the anvil to the letter on the body to get the configuration you need
  • All components conveniently store on tool when not in use
  • All steel construction with heat-treated components for strength and durability
  • May be supported in a vise or held with included handle
  • Great for the professional technician or DIY mechanic
  • Compact and light enough to carry in a tool bag for trail-side repairs
  • Patent Pending

This bright and compact 6-LED flashlight plugs right into your SAE battery charging socket for hours of light. In addition, it has a charging system check that lets you know if your bike is charging properly. It features a 40 inch cord so you can see in those out of the way places when you need to.

Add Charge Ring Connector

Quick release one-piece clamps that saves space. These are great for fuel lines, controlling wires, and can be used many times.

Comes with 4 each of 8mm, 9mm 10mm, and 12mm.

No special tools needed, from Helix Racing.


Made from medium carbon steel with hardened jaws. It features spanner pins and the jaws open up to 5" wide. It's ideal for holding clutch hubs, flywheels, gears, sprockets, etc. Made by Motion Pro.


This tool is designed to separate vertically split crank case halves on two and four stroke engines. Adjustable arms allow it to be used on multiple bolt patterns found on a variety of makes and models of motorcycles. Industrial grade steel construction with black oxide finish for long service life. Comes with 8mm mounting bolts and 6mm adapters. Protective carrying case included.


A must have when blazing new or old trails!

  • Soft rubber handle
  • Thumb latch release for safety
  • 8" blade, 9" folded length
  • Steel frame

A compact and lightweight solution to eliminate the SNAP for a safer tow. If you have ever towed a motorcycle you are familiar with the snap that comes with a traditional tow strap. GCAG made the Dynatow with a section that gives 32 inches of stretch so both riders have an easier tow.

The 26 foot total length gives you enough room to maneuver around obstacles and allows the freedom to choose better lines if you are towing in the gnar.

You can also use this as a recovery strap. You can girth hitch the loop end to the bike and throw the other end to a friend to pull. The dynamic properties of the Dynatow will help assist the pull. All of this functionality fits in a flat pouch about the size of sandwich and only weighs 12.8 oz. Throw it in your bag and be prepared.


  • 1" Nylon Webbing - UV resistant and heavy duty.
  • Tough Tensioners - The elastics are woven inside tubular nylon webbing for protection and strength.
  • Hi-Viz Color - The bright green color will make this easy to see.
  • Sewn Loop - The towing rider can choose to use a loop around the peg or wrap it. The loop also gives options to girth hitch if needed.
  • 1000D Cordura Storage Pouch- protects the strap against abrasion while stored and keeps it compact.
  • Multi Use - All good adventure gear is multi-use. Here's a few ideas.
    • Ridge line for a tarp.
    • Clothes line while camping.
    • Recovery strap for a friend to pull on.
  • Compact and Lightweight
    • Dimensions - 8 in x 6 in x 1 in
    • Weight - 12.8 oz
  • 1,000 LB Working Load - They made it strong just like all of their products.

Please consider the following before use: Practice before you need to use this product. Always inspect your Dynatow strap before use and NEVER use a worn strap. They recommend a proper training class to learn safe methods for towing a motorcycle.


Installing new turn signals or brake lights and need to find the 'HOT' wire, or are you just trying to find out if a specific wire has power going to it? Either way, this test light can help you locate shorts, open, and voltage on 12-24 volt DC circuits.


Having the proper fork oil level is imperative to the handling of your bike. Setting the correct fork oil level is a snap with this fully adjustable gauge. The adjustable aluminum level plate can be set from 0 to 295mm. The oil reservoir has single milliliter markings up to 60ml.

Being able to accurately tune your forks by adjusting the oil level can make them better resist brake dive or bottoming. Oil level should be thought of as a fine tuning method to make your choice of spring rate work perfectly for your bike.


Designed to check the amount of cylinder leakage in a 4-stroke engines. With an air source of 90 to 160 PSI, this system will pressurize the cylinder with 80 PSI of air. Gauge registers the total percentage of leakage past the rings, head gasket, intake and exhaust valves. System includes hose and adapter to fit 10, 12 & 14mm spark plug threads, regulator & gauge. This tester will speed up troubleshooting and will help to isolate bad components.


The GCAG handles are comfortable to pull so whoever is helping will pull harder, and they are soft against your fender so you won't have any annoying bouncing, noise, or graphics damage.

GCAG dirt bike lift strap handles are constructed of 1" thin nylon webbing with flat stainless steel tri-glides for attachment. The grip section is built with 1" climb-spec tubular nylon webbing and a comfort grip handle.


  • Quick tool-less install
  • Stainless steel hardware (no metal contacts your fork tubes)
  • Comfort Grip Handle
  • Fits any bike

Maintain your chain or sprocket, even change your rear tire or wheel while out on the road without the need for a center stand, with the BikeMaster Liftstick. Handy and convenient to carry. Perfect for street, dual sport and trail use. Liftstick includes non-slip rubber boots, which protect your motorcycle's swingarm from any scratches while claws at the base provide traction and stability during use.

  • Made of heavy-duty steel with a powder-coated finish.
  • Available in black or red.
  • Extends from 12.5" - 18"
Choose Color

Make your life a little easier by having a set of these in your toolbox. Designed to simplify installation and removal of clip-type master links. One tip is shorter and notched to be placed on the pin which allows the longer end to push the clip.


This Motion Pro press tool is a must have when installing and removing Clip-Style master links (520, 525 & 530 sizes).

Easily presses on and off master link plates, works on 520, 525 & 530 Clip-Style master links.

Maximum master link width 24.8mm.

Will not damage master links, hardened steel pins for reliable use.

Light weight billet aluminum construction.


A high quality master link press tool from Wirth Machine used for the removal and installation of master links using a press fit link plate.

Fits 520, 525, and 530 pitch chain.


Use this tool to check for air leaks in two-stroke engines. It includes air pressure gauge, pump-up bulb and most fittings and adapters for single and twin-cylinder two-stroke motorcycle engines. Packed in a convenient carrying case with instructions.


Latex free gloves for the shop or garage.

  • 10 Pack

This stuff is Great.

  • Nitro Tape is a self-fusing silicone tape that's easy to remove, leaves no residue either.
  • It is waterproof, stretches up to 300%, has a temperature range from -65° to 500°F and insulates 8,000 volts per layer.
  • It resists UV, salt and corrosive chemicals.
  • 20 mil thick, 1" by 10' long.
  • If you've split a radiator hose, this can help, a 'must have' for all tool kits.



Showa removed the schrader valve on many newer rear shocks. Now you need a needle to recharge your shock with nitrogen after a rebuild. Race Tech built this unit just for that job.


The features of this tool include 300 psi capacity, bleeder valve and T-handle plunger pin chuck. Swivel chuck has a 12" flexible hose. Comes complete with instructions, carrying box and Schrader valve extension (required on some Showa shocks). Nitrogen bottles available at any welding supply house.


For easy removal of recessed oil filters.

Conical point screws pierces and grabs the metal end cap of the filter.

reduces potential damage to the engine cases.

NOT for use on re-usable oil filters.


6" wire twisting pliers with return spring mechanism for easy and safe wire twisting.

•  Comes with 25' of .032 stainless steel wire


This special wiring tool for all of your safety wiring needs.

Hook wire on the stainless hook and rotate the handle for twisting wire.

Make safety wire twisting for grips, drain bolts, and other east tasks.

The twister hook is made of stainless steel, durable, and easy to pack in your tool kit.



The Snapjack is an easy to use, portable, sturdy jack for chain lubricating, adjustment and chain drive maintenance. Also, simplifies cleaning. It can lift the rear tire up to 1/2" to allow the tire to spin freely. Includes front brake locking strap and handy carrying bag.


A professional level adjustable spoke torque wrench. Range from 0 to 62 inch pounds. The handle has a rubber coated end to protect your rims from scratches. Includes Torque wrench, standard handle (for tough disassembly work) and seven different size tips, all packed in a protective case.

Included tip sizes: 5.1, 5.6, 5.8, 6.3, 6.7, 6.9 and Spline drive.

  • Interchangeable tips to fit 8 sizes of spoke nipples.
  • ( 5.6 / 5.8 / 6.0 / 6.2 / 6.4 / 6.6 / 6.8 / 7.0 mm )
  • Main shaft is CNC precision machined from 7075A aluminum and designed for optimum grip.
  • Tips are made of heat treated steel for strength.

Convenient professional grade spoke wrench, a great addition to any tool pouch.

  • Knurled nonslip aluminum handle
  • Includes 6.8mm tip

Recommended for use with Warp 9 wheels.  Please measure nipple size to ensure proper fit.


Precision cut from heavy gauge material.

Extremely durable design.

Push/Pull design for hard to reach places.

Soft but durable PVC coated handle.




  • 12” long wrench gives you more torque to get those thread locked sprocket bolts off easily
  • Double ended 12mm & 13mm to fit all modern motocross, Enduro and dual sport bikes
  • Dog leg wrench design allows wrench to easily clear rim edge and wide tires
  • 8mm allen fits most Japanese bikes 8” long for extra leverage
  • Torx T45 fits late model KTM and Husqvarna bikes, 8” long for extra leverage
  • Vinyl coated handles to protect rim edge and give a non slip grip
  • Makes routine sprocket bolt maintenance a quick and easy job

The Phillips type screws used in Japanese motorcycles are actually Japanese Industrial Standard (JIS) screws are very easy to strip if you are using a regular Phillips screwdriver.

This is a high quality Motion Pro T-handle driver with #1, #2, and #3 JIS bits made from S2 tool steel. There is bit in each end of the driver held in place magnetically. These are 1/4" hex drive heads so you can use all common driver bits as well. The narrow drive head profile easily fits into tight locations. Main shaft is 8.5" long and is chrome plated for protection.


Thread Chasers are designed to clean and re-cut damaged aluminum threads.

this kit contains the two sizes most common on metric motorcycles, M6x1.0 and M8x1.25.

Thread Chasers also remove dirt and metal shavings that become captured in thread grooves.

Uses 8mm or 10mm hex sockets, a Must for all tool kits.


It seems that while packing for every adventure … we always end up with a few items that were either neglected to be packed, were last minute gear additions, or just needed to be packed in a readily accessible location…. The OBR Adv Gear Tool Pouch is the perfect solution for these miscellaneous items. Once packed the tool pouch can be slipped into any bag or attached externally using integrated webbing loops that are built into the pouch.


  • Heavy duty industrial material construction with high strength UV resistant nylon webbing
  • Heavy duty #10 coil zipper that won’t jam up in the dust
  • External reflective webbing with Molle loops
  • Pouch dimensions 5” x 13”

* Tools not included


Always wanted to build or true your own wheels? Maybe just be able to balance your wheels after changing tires. This stand is perfect for both of those tasks.

  • Features a bubble level to balance wheels correctly the first time
  • Steel plate construction for durability and stability
  • Comes with shaft, cones and spacers to fit just about any wheel
Add Dial Indicator

Simplify self recovery with this quick deploy Z-Drag kit. It can sap your energy trying to get your bike unstuck. It can also fall in a way that makes it very difficult to pick up. The Z-Drag is a common rig to give you a mechanical advantage for reduced pull. The combination of roller cams provides a 4:1 pulling ratio for self recovery and a 5:1 ratio when you have help. A laminated instruction card is included in the bag.


  • Quick Deploy - No knowledge of rigging and knot work required. Our Z-Drag comes out of the bag rigged and ready to use.
  • Color Coded - For simple operation.
  • Locking Carabiners - Two climbing rated, locking carabiners for secure attachment.
  • Lightweight - Approx. 3 pounds and small enough to pack on a motorcycle.
  • Strong - Even though its small, it still has a 1000 pound working load.
  • Versatile - With a 74' mainline you will always have enough length to get creative in a tough situation.
  • Multi-Function Bag - The bag features MOLLE compatible webbing on the outside for external attachment. The bag can also be utilized as a dead man anchor.
  • Storage - Comes in a 1000D Cordura storage bag.
  • Recovery - Can be used for solo recovery or with help from friends.
  • Trail Repairs - Can easily be used to hoist your bike from an overhead support for repairs and maintenance while traveling.
  • Clearing Trails - Move fallen trees out or other obstacles out of the way.
  • Camping - Can be used to hoist a bear bag, act as a ridge line for stringing a tarp, etc.


Time to freshen up your forks? Three pack or single 16oz bottles of Maxima fork oil that will refill your tubes after any fork job. This is a high-quality fork oil and what we use on our projects here at ProCycle.

For most situations you will use 10w Fork Oil.  Some custom applications will use the 5w or 15w oil.   Order the 5w oil if you have Ricor Intiminators or Cogent DDCs.


A 1 Liter bottle of light viscosity 3w 75-390 light shock oil.


A six step maintenance system designed to recharge any K&N air filter.

  • Completely restores airflow efficiency
  • Kit includes filter oil, and filter cleaner
  • For K&N filters only

This advanced filter oil & cleaner kit by No Toil is alcohol free, completely biodegradable and compatible with all foam filters.

  • Offers superior protection
  • Waterproof yet easy to clean
Choose Kit

No Toil rim grease is a high viscosity, non petroleum based compound specially engineered to provide the ultimate filter rim to air box seal.

  • Biodegradable
  • Non toxic, Waterproof
  • Easy cleaning in seconds with water and No Toil cleaner
Choose Size

A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing due to weathering or chemicals. Anti-Seize assures easier disassembly. Temperature range: -60°F to 1600°F (-50°C to 870°C). Salt, corrosion and moisture resistant – ideal for marine use. Meets Mil Spec #907E.


Bel-Ray Super DOT 4 brake fluid is specially formulated to exceed all DOT 3 & DOT 4 specifications. What this means to you is exceptional resistance to vapor lock and maintaining consistent lever feel during extreme brake use. This 12 ounce bottle is enough to finish just about any job.

  • Formulated for hydraulic brake systems
  • Mixes with all fluids meeting DOT 3 and DOT 4 specifications
  • Boiling point: dry 446°F, wet 311°F
  • For brake systems and hydraulic clutches, except systems using mineral base fluids

Goes on wet but solvent evaporates to leave a dry moly film. This unique dry film won't attract dirt or dust, is highly resistant to water, prevents rust and corrosion. It is the perfect lubricant to use on brake and clutch cables. Includes applicator needle to get into cables, locks and anything else that needs dry lubrication.


Renthal chain lube is 100% lubricant, zero propellant. So this new 250ml bottle size combines high performance and value.
The all-new formula Chain Lube is specially designed to penetrate all parts of the chain. This all-condition lube is compatible with all o-ring and non o-ring chains.


This is a vacuum operated automatic chain oiling system to keep your driveline adequately lubricated at all times.

When properly adjusted the oil will last thousands of miles between refills. The Scottoiler kit includes one 250ml bottler of oil which is good for 10000 miles of riding.


This chain lube comes in a squeeze-tube bottle with an integrated brush nozzle. It makes applying chain lube easy and less messy than spray on lubes.


Evans Prep Fluid is a waterless cooling system flush engineered specifically to purge the cooling system of water-based antifreeze after draining and before installing new waterless coolant. Prep Fluid should be used when block drains are unavailable or cannot be removed. It is not a substitute for thoroughly draining the cooling system and related components. 

Evans Prep Fluid is ready to use—no water required.

  • Hygroscopically absorbs water
  • Ensures all residual water is removed from the system
  • Ensures that Evans coolants will meet the water content limits and provide peak performance
  • Protects cooling system metals during flush

  Prep Fluid is NOT intended to be a stand-alone operating coolant, but as a flush only.


Evans Waterless Coolant (EWC) can be used for all water cooled motorcycles to eliminate overheating. With a boiling point in excess of 375° F, it will not vaporize, thus eliminating overheating, boil-over and after-boil. At the other end of the spectrum, EWC freezes below -40° F.

EWC also delivers more power by eliminating pre-ignition and detonation caused by overheating, thus improving combustion efficiency. It also generates very low vapor pressures which reduces strain on cooling system components. EWC comes in 1/2 gal. containers.


Installation requires specific procedures. Please click on the 'Instructions' button below to see those directions.

Add Coolant Prep Fluid

Cycle Wipes are pre-moistened and pre-folded towelettes made with a special non-woven "Dirt-Grabbing Mesh Fabric." They are soft, gentle, durable, and a lot more safe than that old rag or paper towel. Their formula contains no harmful ammonia, and is specifically formulated for motorcycle use as an all purpose cleaner for plastic surfaces, especially helmet face shields, headlights, turn signals, and auxiliary lighting.

Cycle Wipes are packaged 12 to a resealable envelope designed to keep them moist until ready to use. They are compact and convenient and easily stored in a jacket, tank bag or pocket. Although Cycle Wipes are very gentle, one should remove gritty dirt and abrasive particles prior to using them. Cycle Wipes are not recommended for use with visor inserts.


Dielectric Grease is an insulating silicone grease designed to insulate and protect electrical connections. Pack it into the back side of electrical connectors to protect them from moisture and corrosion. Do not put it directly on the connection surfaces.

  • Protects electrical connections and wiring from salt, dirt and corrosion.
  • Prevents voltage leaks around any electrical connection.
  • Extends the life of bulb sockets.
  • Suggested Applications: Marine and automotive electrical connections, spark plug boots, trailer hitches, battery terminals.

This is a weatherproof protectant for wiring and electrical connections. Goes on as a liquid and dries to a vinyl polymer that resists dirt, dust, chemicals and moisture, ensuring that connections stay intact. Brush-top applicator allows coverage without gaps and enables access to tight spaces that roll tape and shrink tubing can't get to.


Stabilizes gas for short and long term periods of inactivity (up to two years) while preventing the formation of varnish. Eliminates carbon buildup in fuel delivery system and exhaust components. Increases octane and removes water from the fuel, making it the perfect solution to prevent and eliminate ethanol (E-10) fuel problems. 8 oz bottle treats 48 gallons of fuel.

  • Cures and prevents ethanol fuel problems
  • Helps prevent phase separation
  • Makes engines start easily, run smooth

Permatex Gasket Remover will help you remove that stubborn gasket without having to scrape so much, possibly damaging surfaces. Prepares surfaces for new gaskets. Give it plenty of time to soak in.

  • Motion Pro engineers and test riders found this formula to be the best grip glue available at any price
  • Easy to apply and easy to remove from throttle tube and bars when you change grips
  • High cured temperature resistance is compatible with grip heaters
  • Set time is not so fast that you have to rush when installing grips, but fast enough so you can get riding right away
  • Becomes tacky in 15 minutes at room temperature
  • Outperforms rubber cement, acrylics and silicones because it bonds to more surfaces with greater strength and durability
  • Also works great as general adhesive for anything that requires a flexible, waterproof bond that won't crack or become brittle.
  • Excellent bonding to metal, plastic composites, rubber, leather, vinyl, glass and wood
  • Exceptional flexibility, does not become brittle or hard
  • Can bond items subject to vibration
  • Abrasion resistance makes it great for bonding objects subject to wear
  • Waterproof
  • 20 gram tube (0.7 ounce) is enough for multiple applications

We like red high temperature silicone for use as an adhesive. It is much stronger and sticks better than the standard stuff. The resistance to temperatures up to 650°F is a bonus. Sold in a 3 oz tube.


Hydraulic Clutch Bleeder Kit includes 2oz of Magura Blood clutch fluid, 2 bleeder tools and fittings to properly bleed your hydraulic clutch. Great if you have air infiltration in the system or damaged it in some fashion.


Filling and bleeding a Magura hydraulic clutch does not need to be a routine chore and should only need to be done when air infiltration within the system is suspected. Magura uses mineral oil, which does not absorb moisture from the environment, to lubricate the whole system.

Note: Magura hydraulic systems use ONLY mineral oil. Do not introduce DOT brake fluid of any kind into a hydraulic system designed to use mineral oil as this will cause corrosion to the internal seals and system failure may result. The only time anyone should ever need to replace the hydraulic fluid in a Magura system is following a hydraulic line exchange, a system upgrade, a crash which has damaged the system components or in a situation where a lack of fluid within the system has been diagnosed by poor lever feel.

If you do need to bleed your Magura hydraulic system, their custom made kit does indeed make that chore easier.

Choose Size

Removes splattered insects and organic residues (bird droppings) from wind screens, fairings, paint, metal, mirrors and motorcycle plastics. Like all the other Motul products that we like so much, Insect Remover is amazing. Spray it on and let it sit for a few minutes. It softens and dissolves bug remains much better than other cleaning products.


The best product for those surfaces that mate together without a gasket. Like center cases, cam covers and the like.

  • Heat-resistant
  • Tough, durable sealer utilizing silicone rubber as a primary component
  • Ideal for applications where a long-lasting, faultless seal is absolutely critical
  • 3.5 oz. tube

LOCTITE in a travel friendly package. Choose from Blue (medium), Red (high), or Silver (anti-seize) in a handy glue stick style.

No more leaking all over your tank bag or tool box! 

Choose Type

Moto Wash is a powerful cleaner and de-greaser made by Motul. Safe on all paints, metallic components and plastics. Leaves a corrosion resistant film.


Latex free gloves for the shop or garage.

  • 10 Pack
  • Synthetic spray wax technology
  • Outstanding gloss, clarity, depth, and slickness
  • Use on any hard surface including plastics, rubber, glass, chrome, paint, and fiberglass
  • Fills minor scratches and cob-webbing

ThreeBond 1342 low strength thread locking compound. This is the ideal retaining compound for small nuts and bolts. Fasteners are held securely but, can be easily removed when necessary. ThreeBond gives this a number 4 rating for exposure to engine oil making it a good choice for internal fasteners as well as external fasteners. 10ml bottle.


Slime Tube Sealant is formulated and tested for use in all tube tires. Once installed, Slime remains liquid and will not harden or dry out. Slime is guaranteed for 2 years.

As the Slime treated tube rotates, centrifugal force pushes the sealant to the tread area creating a layer of protection, repairing punctures as they occur and treating existing punctures. Slime is not intended for use in tubes losing pressure from sidewall punctures, bead leaks, damaged rims or faulty valves. Slime for tube type tires is not recommended for use in tubeless tires.

  • Prevents and repairs punctures up to 1/8"
  • Remains liquid inside the tire, coating the tread area as the tire rotates
  • Non-toxic, non-hazardous, non-flammable, non-aerosol and water soluble
  • Tubes treated with Slime can be patched with a conventional vulcanized patch using a bit of patience and care
Choose Size

Bel-Ray Waterproof Grease is the legendary high-performance, multi-purpose grease. Superior water resistance, even in salt water, will ensure continued sealing and protection. Perfect for wheel bearings, headsets, shock linkages, swing arm pivots and other motorcycle, ATV, snowmobile and marine chassis lubrication points. Due to its aluminum complex formula, it won't melt or run out. Enhanced mechanical stability and special anti-wear additives protect and lubricate bearings for improved performance. Sold in a 16 oz. tub.



Replacement shields for your Bell MX-9 helmet.


The New Arai XD4 Helmet is packed full of features and improvements and is a favorite among Dual Sport and Adventure riders.

  • New comfort headliner, with micro fitting 5mm peel away temple pads
  • Fully removable and washable Interior
  • Dry-Cool technology keeps you dry and cool for greater comfort
  • Can be run without visor, or without shield (with goggles) if so desired
  • SNELL 2020

Arai offers a large selection of street and off road helmets. Give us a call if you don't see what you want.


The Trekker helmet crossover design is ideal for dual sport and adventure touring.

  • Advanced Poly Alloy shell construction that is durable and lightweight
  • Removable and washable comfort liner and cheek pads
  • Allows for use of goggles when the shield is in the open or closed position
  • Multi-position, ratcheting face shield
  • Sixteen points of ventilation

Cat Crap is the #1 voted anti-fog on the market. Lens cleaner and anti-fog in one. Works for all lenses, eyewear, goggles, helmet visors, etc.

Choose Type

Connectivity to any pair of mobile devices and easy to use ergonomics. FREECOM1 packs all the latest Bluetooth technology in a sleek modern shell that manages to be both tough, durable yet incredibly smooth and aerodynamic.


  • Single rider/rider to passenger 2-way Bluetooth communication system
  • Automatic Volume Control
  • Mobile Conferencing
  • Charge while riding, Music & Radio Sharing, GPS, Music streaming, 2-Way Intercom
  • Connectivity with two Bluetooth mobile devices, connects and pairs to any Bluetooth headset
  • FM radio, full phone connectivity, VOX, Cardo Connect™ App (iOS/Android)
  • Single rider and rider to passenger intercom
  • Hybrid boom microphone
  • IP67 waterproof
  • Thin 40mm interchangeable speakers
  • Battery capacity: 850mha
  • Bluetooth 4.1
  • Battery operations: 13hrs/1 week talk-time/standby
Choose Type

2 way rider to rider Bluetooth communication system


  • Automatic Volume Control
  • Mobile conferencing
  • Charge while riding
  • Music & Radio Sharing, GPS, Music streaming, 2-Way Intercom
  • Connectivity with two Bluetooth mobile devices, connects and pairs to any Bluetooth headset
  • Hybrid & Corded Mic, FM radio, full phone connectivity, VOX, Parallel Audio Streaming (Android)
  • Cardo Connect™ App (iOS/Android)
  • Intercom bike-to-bike range: Up to 500 m (0.3mi)
  • Intercom overall range: Up to 500 m (0.3mi)
  • 40mm HD interchangeable speakers
  • Battery capacity: 850mha
  • Bluetooth 4.1
  • Battery operations: 13hrs/1 week talk-time/standby
  • IP67 waterproof
Choose Type

FREECOM 4 brings new standards to riding in duo. With explosive sound, extra tough shell, and incredibly flat design, nothing comes close to FREECOM 4 abilities on the real road. No wonder it quickly became the world’s best selling rider-to passenger communicator.


  • Universal Bluetooth connectivity.
  • FM radio, full phone connectivity
  • Charge while riding
  • Automatic Volume Control, Mobile conferencing
  • Music & Radio sharing, GPS, music streaming
  • Natural Voice Operation,
  • Connectivity with two Bluetooth mobile devices, Hybrid & Corded Mic, VOX, Parallel audio streaming (Android only)
  • Cardo Connect App (iOS/Android)
  • Intercom bike-to-bike range: Up to 1.2Km (0.8mi)
  • Intercom overall range: Up to 3.6 (2.2mi)
  • 40mm JBL interchangeable speakers
  • Battery capacity: 850mha
  • Bluetooth 4.1
  • Battery operations: 13hrs/1 week talk-time/standby
  • IP67 waterproof
Choose Type

The world’s best motorcycle Mesh & Bluetooth Communications System.


  • 1-15 Riders up to 8km (5mi)
  • Universal Bluetooth connectivity.
  • FM radio, full phone connectivity
  • Charge while riding
  • Automatic volume control, Mobile conferencing, Music & Radio sharing, GPS, Music streaming
  • Natural Voice Operation
  • Dual core technologies (DMC/Bluetooth)
  • Connectivity with two Bluetooth mobile devices, VOX, Parallel audio streaming, Cardo Connect App (iOS/Android)
  • Intercom bike-to-bike range: Up to 1.6Km (1mi)
  • Hybrid & Corded interchangeable microphones
  • Intercom overall range: Up to 8Km (5mi)
  • 40mm JBL Interchangeable speakers
  • Battery capacity: 850mha
  • Bluetooth 4.1 / Mesh 5.0
  • Battery operations: 13hrs/1 week talk-time/standby
  • IP67 Waterproof
Choose Type


PACKTALK SLIM is a communicator of no compromises. It let’s you focus on your ride without worrying about Bluetooth group connectivity, or obscure buttons. Just tell it what you want – it will do the rest, and stay connected. Its that simple. With DMC® on-board, PACKTALK SLIM is the world’s most advanced communicator, connecting up to 15 riders to an overall distance of up to 6 Km (3.8mi.). From sheer performance, to human engineering, to software design, to an endless list of every imaginable feature – nothing comes close, or looks as good.


  • Universal Bluetooth connectivity
  • FM radio, full phone connectivity
  • Charge while riding
  • Automatic Volume Control, Mobile conferencing
  • Music & Radio sharing, GPS, music streaming
  • Natural Voice Operation
  • Connectivity with two Bluetooth mobile devices, Hybrid & Corded Mic, VOX,
  • Parallel audio streaming (Android only)
  • Cardo Connect App (iOS/Android)
  • Intercom bike-to-bike range: Up to 1.2km (0.8mi)
  • Intercom overall range: Up to 3.6 (2.2mi)
  • 40mm JBL interchangeable speakers
  • Battery capacity: 850mha
  • Bluetooth 4.1
  • Battery operations: 13hrs/1 week talktime/ standby
  • IP67 waterproof
Choose Type

An updated version of our extremely popular Foamerz, these wrap around sunglasses are available in smoked, clear or amber anti-fog polycarbonate lenses. Closed cell foam allows ventilation while providing a cushioned lining to protect the eyes from wind and dust while flying down the road. The flexible, polycarbonate frame wraps securely around the face while rubber strips at the tip of each temple keeps the eyewear in place. For effortless transport, a microfiber pouch is also included.


  • Temple to Temple: 126mm
  • Polycarbonate Frame
  • Anti-Fog Lenses
  • Closed Cell Foam
  • They Float!
  • ANSI Z87.1-2003 Approved
  • Frame size: Medium
  • 100% UV Protection
  • Impact Resistant Polycarbonate Lenses
  • Includes Microfiber Pouch
Choose Lens Color

Wind noise alone on a motorcycle can produce noise levels up to 95db. Permanent hearing damage can occur from 85db, so it is essential to always use hearing protection.

NoNoise Hearing Protectors are superior to traditional foam, wax or silicone earplugs. Precision-tuned, patented ceramic filters ensure maximum protection from dangerous levels of engine, wind and road noise. Unique filtration allows conversation, sirens and horns to remain clearly audible, with no muffled effect. Comfortable and suitable for all ages, they are ideal for bikers and other motor sport enthusiasts. Included is an aluminum tube with a sealed threaded cap for storage. A key ring on the cap allows for attachment of the tube to you jacket, gloves or tank back for easy access.

These units are made from Silicone-free, hypoallergenic thermoplastic for the ultimate in comfort. Another benefit is that this material can be washed and re-used.


Warm, breathable neck warmer by Alpinestars wicks moisture away and is designed to be comfortable under clothing.


Made from warm, insulating and lightweight fleece. Ideal for layering under a helmet or wearing alone.

Choose Size

ThumbDogs turn any glove into a touchscreen glove. They were created so you don’t have to take off your gloves when you want to use your a digital touchscreen device such as, smartphone, GPS, e-reader, gaming console, ATMs, e-tablets, cameras, etc.

Made with medical-grade fabric, ThumbDogs is durable and reliable. It has the right amount of capacitive sensing so you can stay connected. And ThumbDogs will stay on your glove fingertips securely, thanks to our adhesive backing that is glove-friendly and weather-ready. 

ThumbDogs come as a set of 4: Our special medical-grade conductive material enables you to interact with your smartphone. They retail for $14.95, plus shipping & handling. Much less than a touchscreen texting glove. So easy to use – just peel off and attach them to your favorite glove tips,  and start connecting.

  • Top hand constructed from perforated leather and stretch polyamide for optimum levels of comfort, durability and breathability
  • Durable and hard wearing synthetic suede on palm and thumb provide comfort, durability and abrasion resistance
  • Alpinestars' unique polymer hard-knuckle protector for superior impact and abrasion resistance
  • Pre curved fingers for comfort and reduced rider fatigue
  • Silicone printing on finger tips to improve grip
  • Hook and loop grip wrist closure for secure closure

The Navigator glove is a waterproof and breathable gauntlet style with a drawstring inner gaiter to seal out the elements. Full leather construction with synthetic leather palm and strips combine to make an overall lightweight glove suitable for all styles of riding. A rubberized hard-knuckle cap provides additional protection.

  • Waterproof-breathable membrane lining
  • Visor squeegee on left thumb
  • 2 year limited warranty

The FirstGear Kilimanjaro jacket features a nylon shell exterior bonded with a waterproof-breathable, laminate. Our 420-denier nylon fabric was chosen for its balance of lightweight suppleness and outstanding abrasion resistance. The PTFE waterproof-breathable laminate is tough, durable and incorporates revolutionary, 37.5 micro particle technology.

  • 400-denier nylon outer shell is waterproof and breathable
  • D3O Armor padding
  • Amplified moisture transfer rate
  • Armor pocket bags - hook & loop, micro adjustability allow fine tuning for optimal armor placement
  • Articulated sleeves –optimal fit in the riding position
  • Elasticized, draw-string hem –seals out the elements as required
  • 640-denier nylon reinforced shoulders and elbows

A favorite of 'round-the-world' riders the Kathmandu Jacket and pants are a great combination for taking the road less traveled.

  • 300-denier, high-density nylon shell with Hypertex treatment
  • Removable hydration pack with reservoir
  • D3O T5 Intelligent armor at shoulders and elbows. CE-approved
  • Removable insulated liner
  • Under helmet rain hood stows in collar
  • 7-inch underarm, vertical front and rear exhaust vent zips
  • Large rear dry-pocket
  • Five-year limited manufacturer's warranty

FLY Racing Terra Trek Jacket

The FLY Terra Trek Jacket is ready for the toughest of travel conditions. The textile shell includes waterproof and windproof HydraGuard for breathable protection should the skies open up. When heat strikes, open the numerous vents to cool you off, and when the temperatures plummet, put in the full-sleeve thermal liner and laugh at the cold. Whether you are riding around the world or round the state, the Fly Racing Terra Trek is the jacket for you. Available in tall sizes in black only.


  • Poly main shell fabric
  • Breathable, water- and wind-proof HydraGuard 
  • CE certified elbow and shoulder armor
  • Pocket for optional Barricade Level 1 CE back protector (sold separately)
  • Upper and lower arm adjustment
  • Removable full thermal liner
  • Inner pocket
  • Fleece lined back panel
  • Anatomically correct construction
  • Aqua-Guard waterproof zippers on vents
  • YKK two-way main zipper
  • Jacket-to-pants zipper attaches to Fly Racing Street pants
  • Large zippered intake vents on shoulders
  • Chest vents with shock cords
  • VELCRO® brand waist and cuff adjustment
  • Reflective panels
  • Fleece lined collar
  • Reinforced ballistic elbow panels
  • 2 rear exhaust vents
  • Hidden rear cargo pocket

Super tough ToadSkinz blends the traditional look and strength of a high density polyester shell with Dripore Breathable technology and Frogg Toggs classic non-woven inner liner, to produce a soft non-sticky, waterproof & breathable super fabric. 100% waterproof Taped seams, zip off hood design and water resistant zippers make a perfect fit for the Kikker


Designed just up I5 from us in Portland! ICON has really stepped up their game with the new Raiden line. The Raiden™ jacket is purpose-built to withstand the punishment of ADV riding. Rain, dirt, or nasty get-offs, it's ready for anything the pavement or dirt can deliver. The Raiden™ jacket is comprised of a Dupont™ 3-layer nylon shell with 10k/10k Waterproof breathability as well as durable Cordura® overlays in the impact zones. The stretch-cord expansion intake ventilation system and exhaust provides on-demand comfort, prevents moisture build-up, and inhibits overheating. Seven pockets add to the on-the-trail carrying capability while the full D3O® impact protector package does the dirty work. The removable insulated liner keeps you comfortable when riding conditions are less than ideal. The waterproof YKK® Vislon® and AquaGuard® zippers are a must when Mother Nature opens up the skies, and the dual Hook & Loop side adjustment allows you to tailor your fit. A generous amount of retro-reflectivity adds to visual conspicuity. One ride in the ICON Raiden™ Jacket, and you'll experience the finest ADV gear on the market.


Evaporative cooling system helps keep you cool even through the hottest summer rides. Polymer embedded fabric holds the water and keeps you cool as the water evaporates. Outperforms the competition by having an increased evaporative surface area, keeping you cooler.

Can provide 5 to 10 hours of cooling relief per soaking. Lightweight, easy-to-activate and durable.

Available in Black, Silver, and Pink