Featured Products

Back to Top

Athena 290cc Big Bore Kit


This kit from Athena is an afternoon project. Remove your old cylinder and piston, put this new piston, rings, pin and cylinder on with the new supplied gaskets, put the head back on and hit the road!

  • Aluminum cylinder designed with wider water jackets for better cooling
  • Forged hi-compression piston
  • Includes all necessary Rings, Clips, and Gaskets
New! 021016

Evans Waterless Coolant


Evans Waterless Coolant can be used for all water cooled motorcycles to eliminate overheating. With a boiling point in excess of 375° F, it will not vaporize, thus eliminating overheating, boil-over and after-boil. Another benefit is additional power by eliminating pre-ignition and detonation caused by overheating improving combustion efficiency.

ProCycle Tail Tidy Kit


Toss that huge ugly stock taillight-license plate bracket and install this super clean unit from ProCycle. We designed this bracket and have it manufactured right here in Oregon. Kit includes a new license plate bracket that bolts directly to the subframe where the stocker does, a LED taillight / brake light unit as well as compact turnsignals that then bolt to the new bracket. We also include splice connectors and split tubing, everything you need to make a first class installation. The taillight has a cool looking clear lens which lights up red when powered up.

New! 061815

LeoVince X3 Enduro Slip-On Muffler


The LeoVince X3 mid-pipe is made from TIG welded stainless steel, while the silencer is aluminum skinned with a semi-direct chamber internal structure that is secured to the frame by means of a carbon strip clamp. The muffler has a USFS certified Spark-Arrestor. Click here to go to the product listing where you can get yours!

The Enduro model line of mufflers from LeoVince use a mechanical baffle. They do not require repacking and should NOT be disassembled.

Engine

Back to Top

$959.95

Athena 290cc Big Bore Kit

WR250R/X '08-up
  • Aluminum cylinder designed with wider water jackets for better cooling
  • Forged hi-compression piston
  • Includes all necessary Rings, Clips, and Gaskets

You will need to tune your EFI with something like the Power Commander V to get the most out of your Big Bore kit.


$149.95

Barnett Clutch Kit

WR250R/X all

From Barnett, the number one name in motorcycle clutches since 1948, we now offer a complete high performance clutch set. This includes Kevlar friction plates, steel drive plates and stronger springs.

Select Kit


EBC Dirt Racer Clutch Kit and Parts

WR250R/X all

Available in just a Fiber Plate package, just springs or best buy-the EBC Dirt Racer Complete Clutch Kit which includes Fiber and Steel Plates and Springs!

The Dirt Racer Complete clutch rebuild kit is the ultimate package for your Yamaha, here's why:

'Stack Height' is the all important factor when renewing a clutch and riders are always best to buy a complete kit instead of separate single plates as sold by manufacturers. Replacing just the worn plate (or plates) may not even get close to rebuilding your clutch to its original stack height and all you get is clutch slip and the job has to be done again.

  • Complete set of stack height controlled anti-swell friction plates
  • The friction plates are forged allow with wide "Ear" construction to spread the load in the clutch basket and prevent "Dogging" (when the ears cut into the allow clutch basket) which causes a rough clutch, promotes slippage plus it ruins an expensive part of your engine
  • EBC unique alloy article impregnated clutch facings that wear longer and resist burning
  • 15% stronger heavy duty, shot peened clutch springs to clamp those plates together firm and strong for the life of your clutch

Select Kit


Hinson Clutch Plates

WR250R/X all

Hinson Clutch Plates available as a set of just Fiber Plates or just Steel Plates or as a complete set including both.

Hinson Clutch Components sells the best clutch components available in the world. Hinson equipped machines have won 224 National and World Championships in our 20 years of business.

  • Optimum hook up with minimum heat build up provides high performance
  • Developed with and recommended to enhance the performance of Hinson clutch baskets, inner hubs, and pressure plates
  • Exceptional production tolerances and flatness
  • All fiber plates use organic non-abrasive materials to avoid damage to rest of motor as plate materials break down and are circulated through engine by oil
  • Can be used with OEM baskets, inner hubs, and pressure plate

$10.95

New! 81016

Genuine Yamaha Clutch Cover Gasket

WR250R/X all

If you need a new clutch, you probably need a new gasket to seal that cover when you are all done. Genuine Yamaha part.


$79.95

Valve shim kit

WR250R/X all

Includes three valve shims of each size from 1.20 to 3.50mm in .05mm increments. 141 shims in total. 57 cents per shim!


$9.95

NGK Spark Plugs

WR250R/X all

Keep your motor running right with a fresh, top quality NGK CR9EK spark plug. This is the same dual-electrode plug that comes in this bike stock.


$36.95

Hi-Flo Oil Filter Value 10-Pack

WR250R/X all

Providing unbeatable performance and exceptional value, Hiflofiltro is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.

You pay $3.70 per filter with our value 10-pack!


$11.95

Oil Filter Magnet

WR250R/X all
  • Easy to install! Attaches to base of standard oil filter.
  • This powerful six point magnet traps abrasive hard metal particles down to 1 micron. Standard oil filters only trap particles down to 90 microns, leaving behind the most harmful particles to circulate through your engine.
  • Reduce wear, and significantly increase your engine life!
 

$11.95

Magnetic Drain Plug

WR250R/X all

Extra protection for your motor. Strong magnet at the end of the plug picks up metallic flakes in your oil, protecting your engine!

$5.95

Drain Plug Washers


A 10-pack of drain plug sealing washers. Replace your sealing washer at every oil change to prevent an oil leak.


$12.95

Top-Dead Center O-Ring Kit

WR250R/X all

This kit includes the two O-Rings that go behind the plugs you need to remove to find Top Dead Center every time you adjust the valves. These can get old and start to leak after awhile, so replace them before they go bad and keep your motor squeaky clean.

While you're at it, click here to check out the fancy plugs we have for these two spots. Chance to add a touch of bling to your baby and replace those ugly stock units.


$12.95

Oil Change O-Ring Kit

WR250R/X all

This kit includes the large O-Ring that goes on the end of the filter and the small O-Ring that seals the hole just above that. Both are factory Yamaha parts.

Select Kit


Hot Rods 3mm Stroker Crank Kit

WR250R/X all

This is a completely rebuildable stroker crank (3mm additional stroke) turns your mild mannered 250cc motor into a 263cc trail shredding monster! OK, maybe not, but sure makes it a fun machine.

Want the COMPLETE package? Order a Big-Bore kit to go with your stroker! That will give you a 308cc ripper! That is 24% larger than the stock 250. This package includes the Athena Big Bore Kit plus the 3mm Hot Rods Stroker Crank with new Genuine Yamaha crank bearings.

You will need to tune your EFI with something like the Power Commander V to get the most out of your Stroker kit.

Select Kit


Hot Rods Stock Stroke Crank Kit

WR250R/X all

Hot Rods makes a standard stroke crank that is just a drop-in unit, ready to go. We even have a package that includes the crank bearings.


$149.95

Hot Rods Connecting Rod Kit

WR250R/X all

All of the Hot Rods rods are created from case hardened steel. But, in addition to that, rods also undergo a special forging process which helps to improve grain flow as well as dimensional consistency and that means a rod of uncompromising strength. To improve fatigue durability, all Hot Rods are shot peened. This process, utilizing a stainless steel shot, helps to remove stress risers and creates smoothly blended radiuses. In the end, a Hot Rods connecting rod is one of the most durable rods that enthusiasts and engine builders can buy.

Select Type


Gasket Sets

WR250R/X all

Choose standard bore top end, big bore top end or a complete gasket set for the standard bore motor. These are high-quality gasket sets from Athena.

  • The Complete Gasket set for the stock bore does NOT include Oil Seals. Must purchase those separately.
  • The Top End Gasket set for the stock bore includes all the necessary gaskets, rubber parts and valve stem seals for a complete top end rebuild.
  • The Big Bore Top End set includes a base and head gasket

Select Color


$59.95

Moto Hose Colored Hose Kit

WR250R/X all

Keep yourself COOL with a set of Moto Hoses. Moto Hoses are what you need to handle the heat that your bike is putting out whether you're pushing it to the limit or just stuck in slow city traffic.

Each Kit Contains:

  • Color matched carb vent hoses
  • Color matched fuel line
  • Color matched coolant overflow hose
  • Moto Hose is used by Rock River Yamaha and Honda of Troy motocross teams
  • Moto Hose for the WR250R/X is available in Blue or White

Images below are just to show colors, not images of actual kit

  

Select Color


$58.95

DRC Silicone Hose Kits

WR250R/X all

DRC is one of the leading manufacturers of silicone hose kits for motorcycles.

  • Durable silicone radiator hose for dirt bikes
  • Available for MX, ED racers and street dirt bikes
  • Smooth inner diameter allows for increased coolant flow
  • Printed white DRC logo. Available in red, blue and orange colors

 

 

$29.95

New! 020216

Evans Waterless Coolant


Evans Waterless Coolant (EWC) can be used for all water cooled motorcycles to eliminate overheating. With a boiling point in excess of 375° F, it will not vaporize, thus eliminating overheating, boil-over and after-boil. At the other end of the spectrum, EWC freezes below -40° F.

EWC also delivers more power by eliminating pre-ignition and detonation caused by overheating improving combustion efficiency. It also generates very low vapor pressures which reduces strain on cooling system components. EWC comes in 1/2 gal. containers.

Installation requires just a bit more than dumping the old fluid and adding the EWC. Please click on the 'Instructions' button below to see those directions.

Evans Waterless Coolant Installation Instructions

When converting an engine from a water-based coolant to Evans Waterless Coolant (EWC), great care should be given during the installation (conversion) process to insure that all of the old water-based coolant is removed before installing new EWC.

There are a number of methods to use depending on the machine layout and ones mechanical abilities. If you are not comfortable with removing your thermostat and working on the entire cooling system, it is acceptable to drain your system as best as possible, and follow the instructions below.

  • Begin with a cold engine.
  • All of the old antifreeze must be removed from the cooling system. Conventional antifreeze contains water and water contaminates. DO NOT flush with water. (If the system is badly corroded or contaminated with non-coolant products [i.e. rust, oil, dirt, etc.], you may flush with water and use a chemical cooling system cleaner. More care will be needed to ensure that all the water is then fully removed.)
  • Drain cooling system including expansion tank according to the owner's manual.
  • If possible, remove a low hose connection, typically at the coolant pump, and blow air in through the radiator or system-fill opening to push out all the old antifreeze. A high-volume air source is preferred over high pressure air. If compressed air is used to help remove the old coolant and water, be aware that it can damage cooling system components. The use of high volume, low pressure air is preferred because it is safer, and in most cases, more effective.
  • Close up drains, attach any hoses that were removed, and fill system fully with EWC. Run engine until thermostat opens and fluid is circulated thoroughly. Allow engine to cool to relieve any possible water vapor pressure.
  • Drain system and blow out as well as you can again.
  • Close up drains, attach hoses, and fill system with EWC. Fill expansion tank to cold line. Check fluid level after initial operation.

Dispose of drained fluid responsibly. Treat EWC the same as antifreeze for disposal purposes.

EWC expands 7% at operating temperature, about the same as antifreeze. If there is no expansion tank on the system, the radiator will purge a small amount upon warm up. Once cooled, this is now the system's operating level.

EWC is a blend of glycols and so it is compatible with the chemicals in antifreeze so that if you must add water to your system in the case of an emergency, the mixture will perform the same as antifreeze and no worse.


$19.95

Hi Pressure Radiator Cap

WR250R/X all

The higher pressure in the radiator raises the coolant boiling point and increases protection from coolant loss due to overheating.

23 PSI - 1.6 Bar


$58.95

Zeta CNC Oil Filter Cover

WR250R/X all

Unless you have managed to bash yours on a rock, this is an item of pure bling, but hey, there is nothing wrong with that! This CNC Oil Filter Cover is made from A7009-T6 aluminum with the 'Zeta' logo machined into the front and anodized in blue to really stand out on your Yamaha. Do we need to mention that this piece is also lighter than stock?

Select Color

$25.95

Billet Oil Filler Plug

WR250R/X all

The PSR Oil Filler Caps are CNC machined from high quality aluminum and come with an E-clip that is already safety wired to a mounting tab. The wire is covered with silicone tubing that will not melt or discolor

Select Color


$39.95

Timing Inspection Plugs

WR250R/X all

Billet plugs for your left side case. Includes both the timing mark plug and the crankshaft access plug.


$12.95

Feeler Gauges


Dual marked feeler gauges. 32 blades  from .03mm/.001" to 1mm/.040"

Fuel Systems

Back to Top

$53.95

K&N Air Filter

WR250R/X all
  • Increased air flow over the stock air filter
  • Designed to increase horsepower and throttle response
  • Easily fits inside the factory air box
  • Larger surface area over foam filters which offers longer service intervals in dusty conditions
  • Four layers of premium cotton gauze provides outstanding filtration
  • Washable & re-usable, never wears out
  • One filter will last the lifetime of your bike

$21.95

Moose Triple Layer Air Filter

(Made in USA) WR250R/X all
  • Unique triple stage foam filter designed for the most extreme conditions
  • Increased protection against silt, water, and sand
  • Allows for extended filter service intervals
  • Can be cleaned, re-oiled, and re-used like a 2-stage filter
  • Neoprene base gives superior sealing to airbox
  • Includes resealable bag for easy oiling and storage
  • Made in the USA

$29.95

Twin Air Air Filter

WR250R/X all

Twin Air's patented design, high quality materials and superior construction deliver unbeatable performance and protection - and make Twin Air Filters the hands-down choice of more World and National Champions than all other filters combined.

Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles-without restricting airflow!


$32.95

Uni Air Filter

WR250R/X all
  • Designed to fit in the factory air box exactly like original filter
  • The best selling replacement air filter for competition motorcycles and ATVs
  • Unique two stage design allows for easy and complete cleaning
  • Dual layer of foam, can be serviced separately
  • Thin Ultra Seal base is virtually impossible to tear and has a built-in "Grease Groove"

$21.95

No-Toil Air Filter

(Made in USA) WR250R/X all
Dual stage foam: 2 different pore sizes create more trapping area for even the smallest dust particles. Flame laminated foam: Both "Stages" are not glued but heat sealed to provide maximum air flow. Light color foam makes it easier to see where the filter oil has covered and where it has not.

Evolution Air Filter Oil


This advanced filter oil kit by No Toil is alcohol free, completely biodegradable and compatible with all foam filters.

  • Offers superior protection
  • Waterproof yet easy to clean

$399.95

Power Commander V

WR250R/X all

The Power Commander V is loaded with tons of features:

  • Reduced size - less than half of the size of PCIII
  • 2 position map switching function built in (map switch not included)
  • Gear input -allows for map adjustment based on gear and speed
  • Analog input -allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature
  • With gear position input connected the PCV is capable of allowing individual mapping for each gear
  • Unit has a -100/+250% fuel change range (up from -100/+100%). This allows more adjustment range for 8 injector sportbikes
  • 10 throttle position columns (up from 9 on PCIII usb)
  • Enhanced “accel pump” utility -increased adjustment and sensitivity ranges
<

$369.95

Power Commander III USB

(Made in USA)WR250R/X all

The Moose/Dynojet Power Commander III USB plugs in-line with your bike’s stock fuel injection system. It uses OEM-style connectors making installation quick and easy. It allows a full range of fuel adjustment, as much as +/- 100% over stock. Adjustments can be made either with a Windows-based computer or by using the face plate-mounted button adjusters. No permanent changes are made to the bike’s system.


$269.95

LCD Display for Power Commander III & V

WR250R/X all

This LCD Display unit connects to the Power Commander V (some BMW models excluded) via a "quick disconnect" cable. It is designed to remain on the bike and is weather resistant. While connected, the unit will display all available data from the Power Commander. When the optional Multi-Function Hub is also installed all of its data is available for viewing as well.

This LCD Unit can easily be mounted with TECHMOUNT accessory mounting systems. For a complete guide.

! Your Power Commander's firmware may need to be updated to use this device!


$329.95

Yoshimura Fuel Injection Module

WR250R/X all
  • Over 400 adjustment points in +/- 1% increments
  • Easy to read screen - intuitive and logical
  • Full range mapping every 500 rpm at 10% throttle intervals
  • USB cable hook up for your laptop for limitless custom tuning
  • Comes with complete Plug-n-Play wiring harness - Simple to install
  • Complete, simple instructions and Software Disk

$51.95

New! 080515

EXUP Emulator

(Made in USA)WR250R/X all

The 12oclock Labs EXUP Emulator is used in place of the stock exhaust servo motor when you replace the stock exhaust with an aftermarket exhaust system. The microprocessor controlled EXUP, emulates the exact characteristics of the stock exhaust servo motor and its motor delay sweeps, keeping the ECU from displaying the dreaded check engine light. Weight is less than 1/2 an ounce and it is a direct plug and play replacement.


$14.95

K&N Filter Care Kit

For K&N filters only

A six step maintenance system designed to recharge any K&N air filter

  • Completely restores airflow efficiency
  • Kit includes filter oil, and filter cleaner

Drivetrain

Back to Top

$16.00

Front Sprockets

WR250R/X all

For reference, the stock gearing for the WR250R is 13/43 while the X model runs 13/42 stock gearing.


Rear Sprockets


For reference, the stock gearing for the WR250R is 13/43 while the X model runs with a 13/42 stock configuration because of the SM wheels/tires. Both use a 108 link chain with the stock gearing.

The JT front and rear sprockets listed are made from the finest 545C high carbon steel and are then heat treated and hand finished to meet or exceed OEM standards. Outlasts many mild steel or surface hardened sprockets as much as two and three times over.

The rear PBI sprockets listed are made from 7075 T6-51 Aluminum that is stronger than steel sprockets in tensile, yield and shear strength. They are also lighter than steel for less unsprung weight. All of these PBI sprockets are machined from full thickness aluminum for maximum strength.

If you want the additional low-end grunt that the 46, 48 or 50 tooth rear sprocket will give you, you will need longer chain as well.

New Rear Sprockets require new Sprocket Bolts because of a difference in the holes vs. the stock bolts. Click here to order new sprocket bolts.


EK SRO6 O-Ring Chain

WR250R/X all

This is a high-quality Japanese made O-Ring chains from EK. We use these chains extensively through the shop and have great results with them!

The stock chain length is 108 links. If you are changing your gearing buy long and cut to fit.


DID O-RING VX Chain

WR250R/X all

Both of these 520 chains are DID VX2 O-Ring chains.

The 110 Link chain comes with gold colored side plates that really makes your ride look trick! Gold chain comes in the 110 link ONLY and will need to be shortened.

108 Link chain has natural steel side plates.

Both of these DID O-Ring chains come with a clip type master link.

Select Type:

Master Links

WR250R/X all
click to enlarge

Always carry a spare master link when out on the trail.


Important! Master links are not interchangeable. Be sure to get the manufacturer and series off your current chain.

$8.95

Motul Chain Paste


A new innovative product from Motul. This chain lube comes in a brush applicator squeeze-tube bottle. It makes applying chain lube easy and less messy than spray on lubes.

$8.95

Renthal Chain Lube


Renthal chain lube is 100% lubricant, zero propellant. So this new 250ml bottle size combines high performance and value.

The all-new formula Chain Lube is specially designed to penetrate all parts of the chain. This all-condition lube is compatible with all o-ring and non o-ring chains.


$10.95

Sprocket Bolts

WR250R/X all

A set of six high quality grade 10 sprocket bolts with locknuts. Threadlock compound has already been applied for extra security.


$7.95

Upper Chain Roller

WR250R/X all

This roller is made from Delrin, are self-lubricating and a significant improvement over stock. These do not use bearings but rides directly on the frame boss. There is no mounting hardware included.


$15.95

Lower Ball Bearing Chain Roller

WR250R/X all

A quality chain roller with 2 sealed ball bearings. The stock roller has no bearings. It's just a plastic wheel riding on a bolt. Ball bearing chain rollers are smoother, quieter and last longer.

Choose Package:


Scottoiler Auto Chain Oiling System

WR250R/X all

This is a vacuum operated automatic chain oiling system to keep your driveline adequately lubricated at all times.

When properly adjusted the oil will last thousands of miles between refills. The Scottoiler kit includes one 250ml bottler of oil which is good for 10000 miles of riding.


$21.95

EK SRO6 520 Chain Extension Kit


Adding a larger front or rear sprocket may require a few extra links in your chain. If you are running the EK SRO6 520 O-ring chain, our extension kit is an affordable way to do it.

$12.95

360° Chain Brush


This brush has 2.25 coils of 360° chemical-resistant nylon bristles to make it the fastest, most effective, precise and systematic method for giving your chain a thorough cleaning. It will help the performance of the chain, the sprockets and the engine. This brush will fit any 400 or 500 series chains.

$13.95

The Grunge Brush


Innovative design that cleans chain from 3 angles at once. Long handle keeps fingers and hands away from chain and sprockets.

  • Will not harm O-ring chains
  • Easily adjustable for all chain sizes

Suspension

Back to Top

$155.95

Race Tech Front Fork Gold Valves

WR250R/X all

Race Tech's original bolt-on fork valving system for cartridge forks. Gold Valves commonly triple the flow area over stock pistons, putting valving control on the shim stack instead of the piston. This results in outstanding tuneability, improved control, traction, plushness and bottoming resistance. Includes complete instructions, Gold Valve Pistons, Valving Charts, and Valving Shims.

Select Spring Rate:


$149.95

New! 022916

Race Tech For Springs

WR250R

Race Tech HP Springs have a high stiffness-to-mass ratio. In other words; the springs are light weight for their particular spring rate. This requires the finest materials and processing. Shot-peened and pre-set so they cannot sack out. All Race Tech HP Springs have the highest rate tolerances in the industry. These are the finest springs in the world-guaranteed.

OEM spring rate is .46kg. We offer stiffer spring rates from -5% to 10% for riders who wish to carry luggage or just prefer stiffer suspension.


$29.95

Fork Seal with Dust Seal kit

WR250R/X all

Low friction 'triple lip' seal design. Oil seals last 3-4 times longer that OEM seals. Kit includes Fork Seals and dust wipers.


$34.95

Fork bushing Kit

WR250R/X all

Kit includes all the fork bushings, o-rings, snap rings and washers this kit comes with what it needs to completely rebuild your front fork bushings


$39.95

Steering Head Bearing Kit


moose tapered roller bearings provide decreased maintenance, less wear, smoother operation and longer life. This set of high quality replacement steering stem bearings include:

  • Upper and lower tapered bearings
  • Upper and lower bearing races
  • Upper and lower seals

$169.95

Race Tech Rear Shock Gold Valve


The little WR's have decent shocks but it can surely be improved with a Rear Shock Gold Valve from Race Tech. This will improve the damping in both directions and make the clickers more responsive to adjustments.

  • Bolt-on shock valving for riders serious about suspension performance
  • Improves control, traction, plushness and bottoming resistance
  • Improved, long-wearing, low-friction sealing design decreases fade
  • Includes complete instructions
Click here for sample installation information.
Select Spring Rate:




$159.95

New! 022916

Race Tech Shock Springs

WR250R

Race Tech HP Springs have a high stiffness-to-mass ratio. In other words; the springs are light weight for their particular spring rate. This requires the finest materials and processing. Shot-peened and pre-set so they cannot sack out. All Race Tech HP Springs have the highest rate tolerances in the industry. These are the finest springs in the world-guaranteed.

OEM spring rates are 7.7kg on early models and 8.2kg on later models. We offer stiffer spring rates from 5% to 25% for riders who wish to carry luggage or just prefer stiffer suspension.


$79.95

Linkage Bearing Kit

WR250R/X all

Complete kit to replace the bearings and seals in the WR shock linkage. Includes the lower shock bearing.


$69.95

Swingarm Bearing Kit

WR250R/X all

Complete Swingarm Bearing kit to replace the bearings and seals in the WR swingarm pivot.

Exhaust

Back to Top
We recommend Anti-Seize on exhaust fasteners

$279.98

FMF Powercore 4 Muffler

(Made in USA)WR250R/X all

FMF developed the PowerCore 4 to increase the horsepower and torque throughout the entire power curve. Space Age packing for maximum packing life. Removable spark arrestor included. Louder than the Q4. Approximately 99db or about 96db with optional Quiet Insert installed.


$37.95

Quiet Insert for Powercore 4

(Made in USA)

The Quiet Insert will shush up the sound level of the Powercore 4 from about 99db down to about 96db.


$349.95

Two Brothers Racing M7 Slip-On Muffler

WR250R/X all

Lighter weight, more power & good looks. U.S. Forestry Service approved Spark Arrestors are included with all M-7 V.A.L.E. off-road slip-on exhaust systems.


$29.95

Two Brothers Racing - Sound Suppressor


Designed to be used in the Two Brothers Racing M2R or M7 mufflers. A straight-through sound diffuser, the TBR P4 PowerTip quiets the pipe to 95-99 dB with no significant loss of horsepower.

$503.95

New! 001815

LeoVince X-3 Enduro Slip-On Muffler


No repacking required! The LeoVince X3 silencer is made from TIG welded stainless steel internals with an aluminum outer shell. It features a semi-direct chamber design that is maintenance free. It includes a USFS certified Spark-Arrestor.

$51.95

New! 080515

EXUP Emulator

(Made in USA)WR250R/X all

The 12oclock Labs EXUP Emulator is used in place of the stock exhaust servo motor when you replace the stock exhaust with an aftermarket exhaust system. The microprocessor controlled EXUP, emulates the exact characteristics of the stock exhaust servo motor and its motor delay sweeps, keeping the ECU from displaying the dreaded check engine light. Weight is less than 1/2 an ounce and it is a direct plug and play replacement.

Select items




Cycle Performance Exhaust Wrap

(Made in USA)

Set your bike apart with a custom exhaust look.. Withstands direct heat up to 2000°F

  • 2"x25' wrap available in black or natural
  • 4 ea stainless steel tie wraps included

$379.98

FMF Q4 Hex Muffler

(Made in USA)WR250R/X all
  • The Q4 employs intricate chambers, baffles and proprietary multistage packing material making it the best performing quiet muffler available
  • Constructed from aircraft grade aluminum and high strength stainless steel
  • Sound output 96dB
  • 8 pounds lighter than the stock muffler

$189.97

FMF PowerBomb Stainless Steel Headpipe

(Made in USA)WR250R/X all

New from FMF! The PowerBomb header promotes better flow by allowing a small expansion of the exhaust gasses. The 'bomb' also acts as a pre-muffler taking the edge off of overall sound levels. Includes clamp-on mounts for the stock heat shield.

For FMF mufflers only

Headpipe orders ship Parcel Post (6-10 business days) within the US.  Why?

The redesigned PowerBomb is a four-stroke header that incorporates FMF's patented PowerBomb module at a precise location in the initial stage of the header. By positioning this "Bomb" at a key point in the system, increased performance and flow is achieved through the expansion and contraction of exhaust sonics through the system. Result is a flow increase of nearly 10%! The outer chamber in the Powerbomb allows the air to expand, cool and ramp back up at a higher velocity. Additionally, the PowerBomb is a "pre-muffler" of sorts which helps to lower the bikes sound output by providing more sound absorbing surface area for the sound medium (exhaust gases).


$249.98

FMF MegaBomb Headpipe

(Made in USA)WR250R/X all

The science behind the MegaBomb header may be FMF's greatest engineering accomplishment to date. You can bolt on a MegaBomb with an existing FMF Racing slip on for as much as a 3hp boost, plus the MegaBomb actually reduces noises levels by as much as 1.5dB. The MegaBomb technology is evolved to produce more low end to mid range gains as well as broadening out the mid to top end power gains over stock. MegaBomb is the next level technology you can have today.

  • Produces long header torque and short header over-rev
  • Reduces sound output as much as 1.5dB
  • Increases output from stock motor as much as 3hp
  • Stainless Steel Construction for durability

For FMF mufflers only

Headpipe orders ship Parcel Post (6-10 business days) within the US.  Why?


$599.95

FMF Full System: Q4 & MegaBomb

(Made in USA)WR250R/X all

Buy both and save! Includes the FMF Q-4 and FMF MegaBomb header pipe.

  • The Q4 employs intricate chambers, baffles and proprietary multistage packing material making it the best performing quiet muffler available
  • Constructed from aircraft grade aluminum and high strength stainless steel
  • Sound output 96dB

Ships Parcel Post (6-10 business days) within the US.  Why?

$32.95

New! 010516

Stainless Steel Heat Shield


This universal heat shield provides great looks at a great price.

  • Fits all 1-1/2" - 2-1/8" Pipes
  • Measures 7-1/4" x 3"

$34.95

New! 040115

FMF Heat Shield


Have you lost your stock heat shield, or need one on an aftermarket head pipe? FMF makes this nice unit that includes clamps, heat shield with the FMF logo and button head screws to hold it on.


$31.95

Universal Stainless Repack Kit

(Made in USA)

Re-pack your silencer with this pro-quality, three layer packing system and restore the power you have blown out.

Kit includes:
  • 60"x20"x1⁄4" glass mat.
  • 7"x20" stainless wool
  • 8"x20" stainless mesh
  • Twelve 3⁄16" rivets

Select items




Muffler Packing Pillows

(Made in USA)

The latest in muffler packing technology. Spec 31 high performance muffler packing resists breakdown up to 1400°F, is universal and easy to install. Pillow can be trimmed to length to fit mufflers up to 20" long. Comes with cap stuffer to fill packable end caps.

Lighting & Electrical

Back to Top
Choose Package:


Micro-Start Portable Jump Start and Power Supply




A device that you can keep in your fanny-pack, backpack or even pocket that can jump-start your motorcycle or car. It can also charge your cell phone, GPS unit, laptop or other electronic devices.

  • XP-1 is 6" x 2 7/8" x1" 14oz.
  • XP-3 is 5" x 2 7/8" x 1" 12oz.
  • Holds a charge for up to a year.

Review by Dirt Wheels Magazine

XP-1:
  • 200 Amp- 400 Peak Amp
  • 12000 mah Capacity
  • 19V Output Port for Laptops
  • 12V Standard Output Port
  • 5V 2A USB Port
  • Detachable Mini Jumper Clamps
  • 3 power ports: 19v for lap tops, 12v standard output, and a USB 5v output for USB powered devices
  • A Universal Cable with 8 different detachable tips to fit all the different brands of Laptop charging ports (Apple, Acer, Dell, HP, Asus, and more)
  • A Universal Cable for 12v standard plug accessories such as Mobile DVD players and heated gear. (8amp max)
  • A Universal USB Cable with 4 of the most common connectors (iPhone, Lightning, micro USB, mini USB) for portable Electronics such as Cell Phones, iPads, iReaders (Kindles), PSPs, GPS, tablet computers, and anything else using the 5V USB standard
  • 1 Home Charger (to charge the XP-1)
  • 1 Mobile Charger for plugging into cigarette lighter socket (to charge XP-1)
  • Nylon zippered carrying case
XP-3:
  • 200 Amp- 400 Peak Amp
  • 8000mah
  • 5V 2a USB Port
  • Micro-Start XP-3 Unit
  • Detachable Mini Jumper Clamps
  • A Universal USB Cable with 4 of the most common connectors (iPhone, Lightning, micro USB, mini USB) for portable Electronics such as Cell Phones, iPads, iReaders (Kindles), PSPs, GPS, tablet computers, and anything else using the 5V USB standard
  • 1 Home Charger (to charge the XP-3)
  • 1 Mobile Charger for plugging into cigarette lighter socket (to charge XP-3)
  • Nylon zippered carrying case
Choose Package:

New! 082715

Koso Mini 3 Temp/Clock/Volt Gauge


click to enlarge
click to enlarge

This Mini 3 meter was designed to help you monitor basic information before and during a ride. Check the condition of the battery before leaving and the voltage of your system during the ride. The ambient temperature function will give you a good reference about how to dress prior to and what is happening during your trip. It can be very handy to know if the temperature is near or below freezing. The large clock makes it easy to know if you are on schedule or not.

Dimensions: 2.4" W x 1.2" H x .5" D.

Available for the Mini 3 is a nicely crafted mounting plate that allows you to place your new gauge wherever you like.

Optional Add on:


$29.95

"Crash Advantage" LED Turn Signals

Sold in pairs

These bright LED turn signals will bend more than 90 degrees without damage. Only 2 1/2" long!

LED turn signals require an LED flasher. Diode kit is required for bikes with a single turn signal indicator on the dash.


$64.95

New! 012715

3800 Lumen LED Headlight Bulb


New and improved. Brighter (3800 Lumens), better low/high beam contrast, smaller, lower Kelvin color temperature (5500K), replaceable drivers and easier to install. All of these features and the most reliable LED bulb currently available. It only draws 20 watts.

This bulb fits H4 bases only, has Cree XML2 emitters and is fan cooled for extreme conditions. Further features include vibration proof and water-resistance, even complete submersion.

$37.95

New! 032116

Brake Light Modulator

(Made in USA)

This compact, solid state electronic module converts your ordinary brake light into an attention getting, visual alerting device.

Module causes three short flashes and then stays solid for 3.5 sec, then repeats the cycle for as long the brake is on.

! Not for integrated brake/turn units. Resistor Kit may be required if using an LED bulb.

$109.95

signalMinder


click to enlarge

The signalMinder unit is designed as a plug-in replacement for many Japanese bikes. This unit will automatically cancel your turn signal if you forget to shut it off.

  • Cancels signal at 10, 20 or 30 second intervals
  • Allows you to use turn signals as running lights
  • 4-way hazard option
  • Brake flash option

SM-3 unit is designed as a plug-in replacement for most Honda and some newer European bikes. signalMinder uses a computer chip to cancel the turn signals. There are three selectable time outs: 10, 20, 30 seconds.

RUNNING LIGHT OPTION: By attaching two quick-connect wires included, you can convert ALL FOUR turn signals to running lights and establish a dual-channel system on your bike.

Special Note! For 2009 and up Kawasaki models that have onboard computer diagnostics, or if you have Alarm system that activates turn signals, please select SN-4D harness shown below.

Using the DIP Switch #1, you can keep them off and still have the dual-channel system. With the dual-channel system, when you activate the RIGHT turn signal three times in succession, you get 4-way hazard flash function.

BRAKE FLASH OPTION: will flash the turn signal lamps every time you apply brakes. A short 2 second flash pattern begins with quick flashes then slows down to stay on solid.

BRAKE OVERRIDE OPTION suspends the time-out feature until the brakes are released. This allows continued flashing for those times when you are waiting at the signals to make a turn and do not want the time-out to cancel the flashing.

Choose Kit:


Trail Tech Equinox 60mm LED Light



Trail Tech's 60mm LEDs are perfect for any riding adventure, no matter the conditions. Throwing out over 1,000 lumens brightness at only 10 watts, it is one of the most efficient lights on the market.

Three power modes allow performance at any circumstance, from Hi mode for lighting up the night to Low mode for daytime driving light.

The anodized billet aluminum housing is durable and promotes better heat management. Aluminum reflector with vacuum metal deposition creates the most accurate spot beam.



RAM Light Mounts

For LED Auxiliary Lights

The perfect solution for mounting those LED auxiliary lights. The base of the RAM mount is held by your mirror. This puts the light where you can easily adjust the angle for different riding situations. We have 2 types to choose from. The Equinox mount fits Trail Tech Equinox lights or any other light with a 10mm or 3/8" mounting stud. The Solstice mount fits VisionX Solstice lights or any other light with a 6mm or 1/4" hole in the mounting bracket.

Sold individually.

  

$119.95

VisionX Solstice 10 Watt LED Light


Each 10 watt Solstice Solo produces 900 lumens. Roughly equal to a 50 watt halogen bulb. These are the brightest LED off road lamps on the market. The rugged and compact 2” x 2” square die-cast aluminum housing makes mounting easy. The Solstice Solo also features a 4 sided channel design that allows you to interlink it on all four sides with another Solstice Solo pod. Includes stainless steel mounting bracket and waterproof connection. The Elliptical pattern is wide and flat. Sold each.


12V LED Flashlight/Charging System Indicator


This great little 6-LED flashlight goes right into your Battery Tender type plug for hours of light. In addition, it has a charging system check that lets you know if your bike is charging properly. All with a 40 inch cord so you can see in those out of the way places when you need to.

Don't have a cable from your battery? Well, select the package and we will include a cable that goes from your battery to a SAE type connector to plug in your light or charge your battery when at home. This is a fused circuit to protect your battery.

$14.95

ThumbDogs


click to enlarge

These simple add-ons stretch and grip to the finger of your favorite glove using Grrprr technology. Users can operate a phone or any touch screen device and never have to remove their nice warm gloves.

A special conductive material enables you to interact with capacitive touch screens quickly and easily. There are two ThumbDogs to each package so you can double digit type just like you would in the real world. You can also put one on your index finger to operate your GPS.

$89.95

New! 060315

ProCycle Tail Tidy Kit

WR250R/X all

Toss that huge ugly stock taillight-license plate bracket and install this super clean unit from ProCycle. We designed this bracket and have it manufactured right here in Oregon. Kit includes a new license plate bracket that bolts directly to the subframe, a LED taillight / brake light unit as well as compact turnsignals that bolt to the new bracket. We also include splice connectors and split tubing, everything you need to make a first class installation. The taillight has a cool looking clear lens which lights up red when powered up.

 

$79.95

New! 060315

Speedo DRD

(Made in USA)WR250R/X all

The WR Speedo is driven by the motor and is inaccurate up to 10% in the stock configuration. Change your gearing and it gets worse. This speedo calibration device is the smallest in the world and has the widest calibration range available. It has a simple plug and play installation that you do have to program, but easily done just using your current gearing. Change you gearing, easy to change your speedometer.

Other beneficial features include:

  • Saves max speed, which can be recalled to your stock speedometer gauge
  • Built in testing mode to ensure proper installation
  • Works for vehicles which display MPH or KPH
  • Ability to convert MPH to KPH, or KPH to MPH
  • Ratio based correction in 0.1% steps, up to 99.9% + or -
  • Weather proof design to protect against the elements
  • 18" wiring harness (1.5 ft.)
  • 3 year product replacement warranty
  • Made in the USA!

$29.90

Mini Turn Signals

4 Pack

These signals have short rubberized flexible stems and bright mini halogen bulbs.


$149.95

Shorai Power Lithium-Iron Battery

WR250R/X all

Shorai batteries deliver more energy faster, with less weight and with less wear on the battery per start cycle than any other brand or technology available on the market today.

  • Up to 80 percent lighter than their lead acid equivalents
  • Improved starting performance
  • Does not sulfate while sitting
  • Three year warranty
LFX14L2-BS12
  • Weight 1.46 lbs
  • Amp hours 14
  • CC Amps 210
  • Dimensions: l= 4.45" w= 2.28" h= 3.5"

Self-adhesive foam shims are included and insure a great fit to the battery box, as well as extra vibrational an thermal insulation.

Shorai Batteries require a charging system output of 13.1 Volts or higher at idle, and must not exceed 15.2 volts at maximum output. "Smart" lead-acid chargers with automatic cutoff may be used for periodic charging, but will NOT work as a tender/maintainer and should be disconnected immediately after charge has finished. Older lead chargers without automatic shut-off should never be used. Improper charging is dangerous and will void your warranty. A Shorai BMS Charger - with Store Mode - is highly recommended for anyone who rides less than twice a month. Alternatively, you may disconnect the negative cable from the battery for storage, and charge once per year in that case.

Choose Optimate:



Optimate Battery Maintainers/Chargers


Optimate Battery Maintainers/Chargers

Optimate 1 Global Charger-Maintainer

This charger is perfect for 24 hour, 7 days a week, 365 days a year smart battery maintenance. It delivers precise microprocessor controlled charging and long term maintenance. Maintain any type of 12 volt lead-acid filler cap / wet cell, sealed AGM (MF) or GEL battery without overcharging. Ideal for vehicles that are seldom or seasonally used, or in storage. Global Three-step charging program ensures effective charging of the battery and is totally safe for prolonged connection to the battery, without risk of overcharging. Automatic shut-down if short-circuited or battery disconnected. Dust proof case with wall mounts, with 6ft AC supply lead and 6 ft. charge lead ending in SAE connector. Velcro strap slot to hang the charger on handlebar. Weatherproof battery lead & OptiMate battery clip set included.

********************************

Optimate Battery Maintainers/Chargers

Optimate 2 Maintainer

OptiMate 2 senses the battery condition, recharges and then keeps the battery 100% ready. The OptiMate maintenance program delivers only what the battery needs, never overcharges, never undercharges. Provides power to the on board computer, display or antitheft alarm. Totally safe for vehicle electronics. Safe for long-term battery maintenance. Automatic shut-down if short-circuited or battery disconnected. Works with standard filler caps, and sealed maintenance-free units. Includes permanent ringlet connector with weatherproof cap and battery clips. Comes with global input (100-240V).

********************************

Optimate Battery Maintainers/Chargers

Optimate 3 Optimizer

Recovers sulphated batteries and then tests after charging. The maintenance program delivers only what the battery needs, never overcharges, never undercharges. Provides power to the on board computer, display or antitheft alarm. Diagnoses, recovers, charges, tests and optimally maintains, automatically. Comes with global input (100-240V). For batteries forgotten over the winter, OptiMate 3 will recover them from deep discharge and optimally recharge them. Batteries status can be checked at a glance. OptiMate 3 will then maintain the battery at full charge safely for months at a time and increase life by up to 400%. Works with standard AGM, and gel batteries. Do not use with Lithium batteries.

********************************

Optimate Battery Maintainers/Chargers

Optimate Lithium

OptiMate™ lithium, the first OptiMate to protect your LiFePO4 battery unlike any other charger. Will protect your investment and keep your Lithium Iron Phosphate (LiFePO4/LFP) battery performing as advertised for a very long time. With 5 Amps of charge current available, OptiMate lithium's unique multi-step ampmatic™ program recharges and balances cells within the battery quickly and efficiently. Optimate lithium's maintenance program delivers current to the vehicle circuitry, protecting and keeping the battery at 100% charge. Tests and displays battery condition before charging. Voltage retention test is conducted for 30 minutes during which no charge current is delivered, and provides results indicating the battery's general state of health. The 12-hour MAINTENANCE CHARGE CYCLE consists of 30-minute float charge periods at a voltage of 13.6V followed by and alternating with a 30-minute "rest" (no charge current) periods. Includes permanent ringlet connector with weatherproof cap and a set of battery clips.


$76.95

Shorai Charger


You can charge your Shorai battery with a regular battery charger but if you want the very best for it, this charger is designed for optimum performance by balancing the individual cells in the battery. Balanced charging ensures the battery reaches its fullest capacity and longest life. 'Store' mode allows long term long term maintenance storage.

Shorai Charge/Store Dedicated Battery Management System for Shorai LFX only. 2A Max charge rate, connects via BMS 5-pin port on LFX batteries. Includes modes for full charge, or long-term storage. Input USA 110~120V 50/60 Hz.

For Shorai Lithium Iron batteries only


$14.95

USB Device Charger


This mini USB device connects to a battery cable with a SAE connector just like the typical Battery Tender outlet and allows you to charge your iPad, iPod, iPhone, GPS unit, camera or Smart phone. Input is 12 Volts, output to the USB port is 2.1A maximum, perfect for your phone or low or other USB devices.

Select Mount Type:


$49.95

New! 101215

RAM Cell Phone Mount


A complete kit to mount your phone (or other electronic device) to your motorcycle. The cradle expands from 2.25" to 3.25" wide and 4.75" to 6.25" tall. The width is adjustable but fixed while the upper portion of the cradle is spring loaded to keep your device secured in the roughest conditions.

Select the mount option that works best for you. The mirror mount is shown in the photo at left and is a flat plate with an 11mm hole on one side and a RAM ball on the other. Simply remove your mirror, place the plate between your mirror and the perch and tighten it down.

The handlebar mount kit allows you to mount to either a 7/8" or 1-1/8" bar. Also includes hardware to mount to the back of a lever perch. See image at bottom right for kit pieces.

click to enlarge click to enlarge click to enlarge
Include Power Port:


Select Charging Cable:


New! 032516

Weatherproof USB Charging System


click to enlarge

This compact, easy to mount, all weather USB Power Port is the answer for powering and charging your USB devices including cell phones, smart phones, most GPS units, MP3 players and some digital cameras.

Power port connects from battery to handlebars using included universal mount.

Select the correct charging cable for your application by clicking on "More Information".

click to enlarge click to enlarge
  • 18" power port and charging cables
  • Input Voltage: 12V ± 4.0V
  • Output Voltage: 5V ±.25V
  • Output Current: 1A Max
  • 3BR Powersports Universal Mounting System
  • Powers Garmin GPS as well as most cell phones and any other device that charges using 1A or less of USB power

Red Band USB Smart phone Quick-Charge Cables (Micro style connector)looks like standard USB data cables but have the built-in ability to signal Smart phones such as Android or Windows to charge at full rate when plugged into any "dumb" charger such as car chargers, wall adapters or 3BR Powersports TAPP series of all-weather USB power ports. Charging at full rate can reduce the charging time by as much as two hours and will easily keep up with power hungry applications such as GPS or video.

Red Band GPS Power cables (Mini style connector) enable Garmin Nuvi GPS to navigate when plugged into a generic USB power port. Garmin Nuvi uses the cable to determine which mode, navigate or data, the GPS should be operating in. Using a standard USB data cable to power a Garmin Nuvi will cause it to go into data mode for transferring maps, route/track data, pictures etc. The Garmin factory power cable is used to enable navigation mode. However, the Garmin power cable is unsatisfactory for powersports applications as it is not weatherproof, is way too long and is only supplied with a cigarette lighter-type of plug. The 3BR Powersports Red Band GPS power cable looks like a standard USB power cable with a USB Type A plug on the source end but it has internal circuitry to make it appear to the GPS as a Garmin power cable. The USB Type A plug allows powering the GPS from any generic USB port and allows use of 3BR Powersports power port cables for full all-weather protection.

$34.95

New! 101515

Noise Isolating Earbuds


click to enlarge

These lightweight ear buds function just like any other set of ear buds, yet make a much better, and more comfortable seal, which helps put the music (or phone, GPS, intercom, etc) where it matters most. The unique earplug design ensures that wind and engine noise is blocked and more sound from your audio device is channeled straight to your ear. They give you a 25dB sound reduction. Save your hearing and hear your tunes.

The low profile allows them to easily fit under your helmet, giving you ear plugs as well as speakers. Total length of wire is 44", enough to reach just about anywhere you need.


$49.95

Digital Voltmeter and Bracket


A digital voltmeter that can be mounted almost anywhere thanks to our multi-position stainless steel bracket. This will tell you how your charging system is doing and whether or not you need to turn off the laptop and in-flight movie system for awhile. Completely waterproof and comes with connectors, wires and thorough instructions. We consider this a 'must have' device for riders who use heated riding gear, heated grips, additional lighting, GPS, etc.

 image image

Body & Frame

Back to Top

Select Seat:

Optional Add on:


$174.95

Seat Concepts foam & cover kit

(Made in USA)WR250R/X all

Seat Concepts dual-sport/adventure seat-kits incorporate a wider seating area for the rider, which results in more even weight distribution, while reducing pressure points.

Each kit contains detailed instructions for easy "Do It Yourself" installation. This provides the highest level of quality & comfort at an affordable price.

Click here to check out the new seat warmer

! Seat orders ship Parcel Post (6-10 business days) within the US.  Why?

Choose Top Seat Texture:

Choose Side Panel Texture:

$333.00

Corbin Seat - Dual-Sport Riding Comfort

(Made in USA)

Corbin seats are custom made to order. You can choose your preferred texture for the top and sides of the seat. Please give us a call if you would like other color options or materials.

Corbin seats are carefully designed to provide a comfortable riding position. They are firm and supportive which allows you to ride all day without fatigue unlike the stock seat.

Corbin seats are built to order and may take 2-4 weeks lead time.

The default vinyl choices are black 'carbon fiber' on top and 'asphalt' on the sides. You can view all of the available materials and colors on Corbin's Website. If you would like your seat built with something other than the standard choices send an email after placing your order.

Click here to check out the new seat warmer

! Seat orders ship Parcel Post (6-10 business days) within the US.  Why?


$369.95

Sargent World Sport Seat

(Made in USA)WR250R/X all

 

Sargent's proprietary seat foam is their own unique blend of resilience, firmness, and vibration-absorption qualities - making it well suited for maximum long distance comfort.

! Seat orders ship Parcel Post (6-10 business days) within the US.  Why?


$79.95

Moose Seat Warmer Kit

All Seats!
click to enlarge

9" by 9" carbon fiber seat warmer that goes between your cover and the foam to keep your backside happy on those really cold days. This improved design produces 25% more heat than most other warmers using just 30 watts.

Kit includes the warming unit, with connector, 24" extension cable, rocker-type on/off switch and stub to splice into your wiring along with complete detailed instructions.


$69.95

Sheepskin Seat Cover

(Made in USA)

This is the secret for being able to put in those 500 mile days. Even a good touring seat can feel a bit firm after a couple hundred miles. Sheepskin gives that little bit of 'cush' and provides superior air circulation. Velcro straps allow easy removal when you don't need it. Measures 14" wide by 19" long.

$22.95

New! 071514

Sit & Fly Net Seat Cover


Want to stay cool and comfy on those long summer rides? The Sit & Fly net seat cover allows air between you and the seat keeping things significantly cooler.

Allowing the air to circulate under you eliminates perspiration and keeps things dry and comfortable.


$99.95

AirHawk Seat Cushion


So you're not ready to dish out the money for a new seat but you can't stand to sit on the stocker for more than 50 miles. The Air Hawk might be the answer.

  • Air filled Airhawk 12"x18" cushion custom fits your shape and redistributes pressure that causes numbness and discomfort when you ride
  • Seat cushion cover is constructed of a breathable, stretchable Nylon/Lycra blend with a non skid Urethane base
  • Open mesh side panels allow heat to escape
  • Easily inflates by mouth with no pump needed
  • Mounting straps and Repair patch kit included
 

$19.95

New! 011916

Clear Headlight Guard

WR250R/X all(Made in USA)

Made of military aircraft grade 3/16" cast acrylic, this guard will protect your lens from roost, rocks and branches. Optical clarity of the acrylic ensures brightness and projection of your headlight are minimally effected while all the while protecting your headlight from impact and abrasion.

Guards are held to the headlight lens with an industrial strength hook and loop system on each corner.

$57.95

New! 072415

Headlight Guard

(Made in USA) WR250R/X all

A headlight guard by will protect the headlight from flying debris

  • Fabricated from mild steel and expanded metal
  • Powder-coated flat black
  • Light weight with limited reduction in light output
  • Easy installation with all required hardware provided

$259.95

IMS 3.0 Gallon Gas Tank

(Made in USA)WR250R/X all

Designed to enhance the appearance of your motorcycle, yet provide greater riding distance per tankful. Larger capacity than stock, yet very slim and sleek. Perfect for the dunes or the race track! These tanks are made with crosslinked polyethylene for extra strength and durability.

Available in Natural, Black and Blue. Natural color is recommended to easily see the fuel level in the tank. Includes cap and fuel petcock.

! Fuel tank orders ship Parcel Post (6-10 business days) within the US.  Why?


$389.95

IMS 4.7 Gallon Gas Tank

(Made in USA)WR250R/X all

IMS Products 'Adventure Tank' for the Yamaha WR250R/X. They call this an Adventure tank because it maximizes your capacity preparing you for those extended trips without the need to stop and fill up. This tank has a 2.75 gallon advantage over the stock fuel tank and it handles it well.

IMS made this tank to replace the stock radiator shrouds and keep the fuel down low for a lower center of gravity, improving the handling and stability of the bike. They also have installed a lift pump to allow the stock fuel pump to stay in the standard position while efficiently utilizing the entire capacity of the tank. It is available in Natural, Black, Blue, Red and White.

! Fuel tank orders ship Parcel Post (6-10 business days) within the US.  Why?


$11.95

Fuel Tank Vent Cap


If you're like us, you hate the long floppy vent hose hanging off the cap of your aftermarket tank. This one-way vent cap replaces the long hose with a short one only about 2" long. It allows air into your tank but prevents fuel from sloshing out. Machined from billet alloy and anodized for good looks.

Not for stock fuel tanks


$32.95

Locking Gas Cap

Fits Acerbis, IMS

Security for your fuel tank. Includes 2 keys. Internally vented with a check valve that prevents spillage in case of a tip over.


$15.95

Replacement IMS Gas Cap

All IMS tanks

A replacement gas cap for your IMS tank. Newly redesigned to resist damage from new fuel additives that were hard on the seal in the old style cap.

$69.95

071316

Zeta CNC Gas Cap for Stock Tanks

WR250R/X all

This CNC cap will replace the stock gas cap on the stock tank. You do need some parts from the stock cap, so don't throw it away yet! It is not difficult and this kit includes the additional hardware required. Also included is a vent tube with a matching cap.

For use on STOCK TANK ONLY! This is NOT a locking cap.

$34.95

New! 032917

Fuel Tank Filter

Fits Acerbis, Clarke and IMS tanks
Fuel Tank Filter

Fuel supplies can be sketchy at times. This filter lives in your tank to trap dirt and debris as it is poured into the tank. Features a custom shaped adapter that fits securely under the gas cap, creating a leak-proof seal. If it stays out of your fuel, it can't get into the carb! Created by the filter experts at Twin Air, this filter fits IMS, Clarke and Acerbis gas tanks.

Choose Color

011916

Parabellum Rally Windscreen

WR250R/X all (Made in USA)

The Rally windscreen from Parabellum is the perfect protection from wind and debris without sacrificing technical off-road capabilities. This is an upright rally type windscreen that looks aggressive and performs well under all types of riding. Designed primarily for the off-road / dualsport enthusiast, this shield keeps pressure off the rider's chest while commuting from home to adventure and back.

Mounting is accomplished by drilling two holes on each side of your headlight cowl using the provided template. 13.5 inches tall, 11.5 inches wide at the bottom, and 8.5 inches wide at the top. Made from military aircraft grade cast acrylic.

$57.95

New! 072415

Radiator Guard

(Made in USA) WR250R/X all

Heavy-duty, 4mm thick 5052 aluminum, to protect expensive and fragile radiators from side impacts and twisting.

  • Includes all necessary mounting hardware and instructions
  • Will not work with over-sized gas tanks

$44.95

New! 072415

Master Cylinder Guard

(Made in USA) WR250R/X all

Master Cylinder guard by Moose Racing will protect the exposed rear brake master cylinder from damage

  • Fabricated from mild steel and expanded metal
  • Powder-coated flat black
  • Light weight and does not interfere with boot placement on the footpeg
  • Easy installation with all required hardware provided

$31.95

Rear Caliper Guard

(Made in USA)WR250R/X all

  • Protect your investment with the Works Connection rear brake caliper guard that is simple to install and does not break the bank.
  • Works Connection built the rear brake caliper guard from CNC'd aircraft grade 5052 aluminum for lightweight durability.
  • No need to modify anything with this rear brake caliper guard because Works Connection includes all the hardware to easily bolt on.
  • Works Connection designed and built the rear brake caliper guard in the USA.

$99.95

Aluminum Skid Plate

(Made in USA)WR250R/X all
  • Made from strong and lightweight 4mm thick aircraft aluminum
  • Protects vital engine parts from rocks and debris
  • Custom fit to your specific bike model
  • Oil drain hole for easy access
  • All mounting hardware included

Wheels

Back to Top
Select Rims:



$1299.00

ProCycle SUPERMOTO 17" Wheels

WR250R/X all

We start with Excel Takasago, or top of the line Sun rims, OEM hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are then precision machined for a perfect match to your bike.

Our pro shop then laces and true's your wheels to perfection, giving you the highest quality set of custom wheels available.

  • New OEM hubs with bearings and seals installed
  • Excel or Sun 3.5" x 17" front rim
  • Excel or Sun 4.25" x 17" rear rim
  • Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples

Add any set of SM tires to your order and we will mount and balance for free! Tubes and rim strips included.

Wheels are custom made to order and cannot be canceled. Please allow 2-3 weeks for delivery.

Select Rims:



$1299.00

ProCycle ADVENTURE Wheels

WR250R/X all

Complete set of 'Adventure' wheels. These are the same rim sizes as used by the BMW GS and other big adventure bikes. The 19" front and wide 17" rear will give you great twisty road handling on the pavement while still being dual-sport friendly.

We start with Excel Takasago, or top of the line Sun rims, OEM hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike.

Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.

  • New OEM hubs with bearings and seals installed
  • Excel 2.5" or Sun 2.75" x 19" front rim
  • Excel or Sun 4.25" x 17" rear rim
  • Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples

Add any set of ADV tires to your order and we will mount and balance for free! Tubes and rim strips included.

Wheels are custom made to order and cannot be canceled. Please allow 2-3 weeks for delivery.

Choose Size:


Choose Rim:

Choose Hub:

ProCycle Complete Front Wheel

WR250R/X all

Built with new OEM Yamaha hub, bearings, seals, Excel or Sun rim and Buchanan's stainless steel heavy gauge spokes. Laced and trued. All the wheels we build allow the use of stock rotors and sprockets.

  • Choose from these Excel rims:
  • 1.60 x 21 Offroad
  • 1.85 x 21 Dualsport
  • 2.15 x 19 Adventure
  • 2.50 x 19 Adventure (Sun rims are 2.75)
  • 2.15 x 18 Street
  • 3.50 x 17 Supermoto

Allow 2-3 weeks for delivery.


Rim upgrade options:

ProCycle Complete Rear Wheel

WR250R/X all

Built with new OEM Suzuki hub, bearings, seals, Excel or Sun rim and Buchanan's stainless steel heavy gauge spokes. Laced and trued. All the wheels we build allow the use of stock rotors and sprockets.

Choose from these Excel rims:

  •   2.50 x 18 Offroad (Sun rims are 2.75)
  • 4.25 x 17 Supermoto

Allow 2-3 weeks for delivery.

Select Rims:



$769.00

Lace your own SUPERMOTO Wheels


Choose from Excel Takasago, or top of the line Sun rims. Both come with Buchanan's heavy gauge stainless steel spokes and zinc-plated nipples. Rims and spokes are precision machined for a perfect match to your bike.

  • Excel or Sun 3.5" x 17" front rim
  • Excel or Sun 4.25" x 17" rear rim
  • Buchanan's stainless steel heavy gauge spokes and zinc-plated nipples

Rims and spokes are custom made to order and cannot be canceled. Please allow 1-2 weeks for delivery.


$24.95

Rear Wheel Bearing Kit

WR250R/X all

Moose Racing rear wheel bearing kit. Includes both wheel bearings and both dust seals. All bearings are sealed on both sides.


$13.95

Front Wheel Bearing Kit

WR250R/X all

Moose Racing front wheel bearing kit. Includes both bearings and both dust seals. All bearings are sealed on both sides.

$44.95

MotoPressor Pocket Pump


The MotoPressor is a compact pump unit that weighs only 1.5 pounds and fits in the palm of your hand. MotoPressor very cleverly omitted the plastic housing you find on other pumps. This makes it smaller and easier to carry with you. Included is a 25 inch long inflator hose, with a hands-free lock-down delivery valve. You also get a SAE power cord that attaches to your battery and stays there. The Pocket Pump has an 8.5 foot cord to give your air supply plenty of reach. All this packs into a heavy duty neoprene pouch.

MotoPressor will pump the front or rear tire of your motorcycle from flat to approximately 30 psi in 2 minutes and is capable of pumping to over 100 psi. Use it to inflate tires, top off your air shocks, air forks, inflate air beds or anything else.

If you will use the MotoPressor on a CANbus BMW please click on the More Information button.

! Do not use this pump in a standard BMW accessory outlet, unless it is wired directly to the battery and bypasses the motorcycle's electrical CANbus system. The CANbus monitors and limits the amperage of the accessory outlet. When you plug the MotoPressor into a CANbus equipped accessory outlet the CANbus will automatically shut off the circuit and the MotoPressor will stop working. It is not the fault of the Motopressor.

If you have a CANbus equipped bike and you are not SURE about using the accessory outlet, use the alligator clips to get power from your battery or better still connect the supplied SAE terminal connectors to your battery and get power from there.


Supermoto Tubes


Designed for bikes that use tubes with radial tires, like supermoto and retro bikes with spoked wheels. Straight metal valve stem. Fronts fit 120/70 and 120/60. Rears fit 150/60, 150/70 and 160/60.


Heavy Duty Tubes


  • Heavy-duty tubes made specifically for off-road and or motocross
  • German made, these are the sturdiest, highest quality tubes on the market
  • 3mm thick natural rubber construction helps resist pinch flats and is easier to patch than butyl rubber
  • Straight metal valve stem

$309.95

TKC80 Dualsport tires for your Supermoto


The well proven TKC80 dual sport tires are now sized to fit supermoto wheels. Sold as a pair with a 120/70-17 front and a 150/70-17 rear. Easier and less expensive than lacing up dedicated off-road wheels for your SM. Aggressive tread knobs for bite in the dirt. Sticky rubber for traction on the pavement. This is the tire that can make your street motard into a do it all ride.

Brakes

Back to Top

EBC Brake Pad Sets


  • Sintered Pads are best for regular riding. Long life, and good performance in all conditions
  • Sport Carbon pads are made for fast riding in dry conditions. Not recommended for mud, water, or sand
  • Race Sintered are designed for racing use
  • Includes front and rear brake pads

$31.95

Rear Caliper Rebuild Kit

WR250R/X all

All the parts you need to freshen up your rear brake caliper. New piston seals, slide pin and boots. Fix that sticky or limp rear brake.


$22.95

Front Caliper Rebuild Kit


All the parts you need to freshen up your front brake caliper. New piston seals, slide pin and boots. Fix that sticky or limp front brake.


EBC Contour Brake Rotors


With contoured profile to reduce weight, rear versions of this new program are made in HPSR steel and zinc plated to avoid corrosion. The latest EBC contour PLUS rotors are made with special stainless steel and new lightweight profile and feature the new scraper slot system which has proved to be so successful in preventing early life rotor damage when bedding in new brakes. The scraper slots remove any loose particles/debris as the pads bed in during early life after fitment and prevent rotor scoring.

WR250R


WR250X


Steel Braided Brake Line


Steel braided lines have a Teflon tube as a core wrapped with a stainless steel wire braided exterior which doesn't allow the brake lines to stretch under pressure like stock rubber lines do.

The benefit is a firmer brake lever with better feel because the energy that was going into stretching the stock lines now goes straight to the brakes.


$9.95

Brake Rotor Bolts

WR250R/X all

A set of front and rear brake rotor bolts. These bolts already have thread lock compound applied to the threads.


$25.95

Rear Master Cylinder Rebuild Kit

WR250R/X all

All the parts you need to freshen up your rear brake master cylinder. New piston, seals, return spring, boot and snap ring.

Controls

Back to Top
Choose Bar Size:

$39.95

New! 081415

Warp 9 Handlebar Risers

WR250R/X all (Made in USA)

Handlebar mounts that replace your stock clamps. These raise your handlebars 1 inch. Choose 7/8" for standard handlebars or 1-1/8" to allow installation your choice of oversize handlebars.

Choose Throttle Tube:


New! 091615

Quick Throttles



A quick throttle uses a larger cam, or 'pulley', to open the throttle faster than the stock unit does. Less overall rotation is required to reach full throttle and this can be benefit to riders with limited wrist mobility and it also allows you to maintain a proper riding position with less elbow drop as you crank the throttle.

There are two excellent quick throttles available for the WR250R/X. The Made in the USA G2 unit (upper image at left) uses self-lubricating Delrin bushings in a tube machined from 6061 aluminum which provides an ultra-smooth feel. The end of the tube is removable allowing for bar end plugs or hand guards to be installed.

The Zeta quick throttle tube (lower image at left) is also made of 6061 aluminum and is then hard anodized. It has a unique tapered inside tube design that eliminates much of the frictional resistance between the tube and the handlebar. The Zeta also has a removable end cap for bar end plugs or hand guards.


$10.95

ProGrip 714 Rally Grips

Our Favorite Grips!

Replacing your handlebars? Time to replace those worn out grips? These grips feature a thicker design that dampens vibration. The soft shoulder allows ease of movement. Three wire-tie grooves are molded into the grip to make securing them a breeze.

Select Controller

BikeMaster Heated Grips


Highly efficient design delivers warmth faster than traditional heated grips.

Choose from the standard five level push button temperature controller, or the LCD display controller which shows the selected heat level and available battery voltage.


$22.95

Lever Set

WR250R/X

A set of replacement brake and clutch levers in polished aluminum.


$18.95

Clutch Cable

WR250R/X
click to enlarge

A quality Motion Pro replacement clutch cable


$28.95

Throttle Cable Set

WR250R/X
click to enlarge

A quality set of replacement throttle cables from Motion Pro

Choose Size:


Doubletake Mirrors

Sold Separately
Enduro Mirror

ADV Mirror

Made from a nylon and fiberglass composite, these mirrors are extremely durable. They easily fold out of the way when you head off-road.

Enduro Mirror 4" diameter

Ideal for dualsport use, where you want the absolute minimum profile when folded down. SAE spec convex glass gives a much greater field of view than flat glass.

ADV Mirror 3" x 5"

Adventure mirrors are designed for adventure riding where you want your mirror extended most of the time.

Mirrors mount to any 10mm perch. Mirror and arm included as shown in pictures. If you need a mount for your mirror, click here to see our split clamp mirror mount and mirror mount adapter.


$22.95

Folding Dualsport Mirror

Sold per each

This new mirror screws into your stock mirror mount but can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price of the KTM part. Fits either left or right side.


$49.95

Bar-End Mirrors

Sold in pairs

Bar end mounted mirrors move the mirrors out past your elbows so you can actually see what is behind you. They can mount with or without hand guards.

$99.95

New! 081415

Oversize Handlebar Kit

WR250R/X all

Here is a complete kit to install oversized tapered 1-1/8" handlebars on your WR250R/X. Warp9 handlebar clamps bolt to your stock triple clamp adding an additional 1" to the height.

Alloy oversize bars offer more durability and eliminate the crossbar which opens up your dash area for more goodies.

$54.95

New! 020615

Chromoly Wide Footpegs

WR250R/X all

Light weight and strong. These DRC footpegs have a wider platform for increased comfort and control. Cast from Chromoly steel for unbeatable strength and durability.


$165.95

Pivot Pegz MK3

WR250R/X all

Pivot Pegz have set a new standard in footpeg performance and quality and now they are even better. The new Mark 3 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 3 also incorporates new heavy duty, long life springs and they come with a lifetime warranty.

Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever.

  • Mega wide 60mm platform
  • Widest and lightest pivoting pegs on the market
  • Open design = less mud packing
  • Unique multi-directional grip pattern
  • Outstanding build quality
  • Race proven design and durability

$29.95

Pivot Pegz Toppers



Not your average rubber insert! These rubber covers go over the top of your Pivot Pegz so that the aggressive teeth are only exposed when you need them in muddy conditions.

  • Unique, innovative design
  • Wide flat platform
  • Openings allow mud/dirt to pass through
  • Easy and quick to get on/off
  • Good grip
  • Reduced vibration
  • Extra comfort




$274.95

Fastway ADV Pegs

WR250R/X (Made in USA)

Finally, the ultimate Adventure peg, from the folks at Fastway - Pro Moto Billet. This peg is big enough to stand on all day with no fatigue, it measures 2.25" front to back and is 4.75" wide.

In addition to the big size, you can also adjust the camber with their patented FKMS Kamber bolt. ´Tilt´ your pegs to increase comfort, or to give better squeeze on your bike. You can further customize them with 3 styles of patented adjustable threaded cleats. Take your traction from comfortable to gnarly. Fastway Adventure pegs come with two sets of F3 cleats, one standard, one long. You can also order serrated (F5 - bottom left image) or spiked (F6 - bottom right image) cleats separately.

These Adventure pegs are offered in several colors, but some colors may require extra time, call for availability.

 




$199.95

Fastway Evolution AIR Pegs

WR250R/X (Made in USA)

The new Fastway Evolution AIR footpegs are now the ultimate pegs in the Universe.

Designed and sculpted out of the best 7075 Billet aluminum by Pro Moto Billet elite engineers and machinists. Featuring Fastway's Patented adjustable height, traction, and camber options, the Evolution AIR footpegs are superior in every way. Fastway Evolution AIR pegs are designed to shed mud and debris, while being ultra strong.

You can also order serrated (F5 - bottom left image) or spiked (F6 - bottom right image) cleats separately. See images above.

These AIR pegs are offered in several colors, but some colors may require extra time, call for availability.

$26.95

New! 080416

Folding Shift Lever

WR250R/X

Forged aluminum, black anodized arm and Knurled CNC aluminum shift tip.

Luggage Racks

Back to Top

$199.00

Happy Trails SL Side Racks

WR250R/X (Made in USA)

The Happy Trails SL (Soft Luggage) Racks work perfectly with the Wolfman Expedition Dry Bags.

Features:

  • Thoroughly tested 4th generation side racks
  • Three point mounting system (includes mounting hardware)
  • Strong 5/8" round tubing for the arms and SL mounting loop
  • Racks add protection for the bike in the event of a tip-over
  • Each rack is fabricated by expert craftsmen
  • Racks finished with a black powder coat

Go to our Luggage Page and pick out any set of qualifying side bags or cases and get $20.00 off side racks!

Select Size/Color:

ROK Straps

The ultimate stretch strap

These flat tie down 'stretch' straps are designed specifically for motorcycles, ATVs and snowmobiles. Carry anything on your motorcycle securely and without scratches with these flat - no hooks - tie down straps.

ROK Straps are a must have for any dual sport or adventure rider!



ROK Straps are a two-piece strap that has a quick-release buckle in the middle and loops on each end.
One end of the strap is a heavy duty nylon, the other has a strong stretchable section. Instead of hooks
that can slip or come undone, ROK Straps have a loop sewn in each end. you pass the buckle around
your frame, rack or other secure point and then back through the loop in the end making for a very secure
mount. With each end secured, connect the buckle in the middle and simply tug the slack end of the strap
until your load is firmly held in place.


$99.00

Nomadic Racks Rear Rack

WR250R/X all

Simple, quick installation of this 1 pound rack made from rugged 3/16" 5052 Aluminum. Sleek and low mounting allows for seat removal with no hassles.

Features:

  • numerous slots for securing cargo
  • RotoPax mounting kit compatible
  • All hardware and instructions included




$145.95

New! 031415

Pro Moto Billet Cargo Rack

(Made in USA)WR250R/X all 

Not only are Pro Moto Billet Cargo Racks brutishly strong and functional, but they look great too. Each cargo rack is methodically engineered, then CNC machined on-site from a 1/2 inch thick plate of USA made 6061 aluminum by master machinists and then anodized black.

PMB uses only stainless steel fasteners for worry-free years of riding. Excellent instructions and all necessary hardware is included.

Need to mount your turn signals to your new Pro Moto Billet Rack? Just add a set of CNC machined aluminum Turn Signal Brackets for $15.95 and that will be no problem. See bottom image.

Luggage

Back to Top

Saddlebags & Hard Cases


Choose from a huge selection of sidebags and hard cases from top brands.

  • Wolfman Luggage
  • Nelson Rigg
  • Giant Loop
  • Moose Racing

Tank Bags


Tank bags provide easy access to personal items and come in a variety sizes, styles, and colors.

  • Wolfman Luggage
  • Nelson Rigg
  • Giant Loop

Duffel Bags


Select from an assortment of sizes, designs, and brands.

  • Wolfman Dry Bags and Rolie's
  • Saddlemen Destination Pack
  • Givi waterproof bags
  • Firstgear Torrent bags

Top Cases


Top cases by Moose Racing allow easy access and transportation of items for long rides or daily commuting.

  • Expedition Aluminum Top Cases are a perfect match for the Expedition Side Cases. Available in 25 or 38 liter sizes
  • Expedition Hard Top Cases are perfect for daily commuting and errands around town. Available in 28 or 47 liter sizes

Fender Bags


Fender bags are perfect for carrying tools and tubes on any adventure.

  • Wolfman 1.25 Liter front fender bag
  • Moose Racing removable rear bag
  • Wolfman 3.5 Liter tool bag
  • Chase Harper rear fender pack

Accessories


Luggage accessories to complete your luggage set.

  • RotoPax fuel and water containers
  • ROK Straps
  • Universal Mounting Kits
  • Much more!

Helmets & Apparel

Back to Top

Dual Sport Helmets


We have put together a great list of dual sport helmets for any budget.

  • Arai XD-4 Dual Sport features great quality and looks
  • Shoei Hornet X2 for serious dual sport enthusiasts
  • Bell MX-9 Adventure new for 2015 is everything you want at a great price
  • AFX 41-DS Dual Sport features an inner flip down sun shield
  • Fly Trekker gives great quality and price

Rain Gear


Stay dry with quality rain gear by Frogg Toggs. Frogg toggs is committed to providing the best in affordable, innovative rainwear technology. ToadSkinz technology is a newly developed hybrid fabric that was engineered by the frogg toggs research team. This unique new material has the look and feel of a traditional polyester rain suit but with a non-woven inner layer that provides guaranteed waterproof and windproof performance in a lightweight garment with great breathability.

Gloves


Choose from a great selection of Firstgear dual sport gloves.

  • Ultra Mesh Gloves
  • Kilimanjaro Gloves
  • Kathmandu Gloves
  • Cold Weather Gloves
  • Many More!

Accessories


We have put some common sense dual sport items on our accessories section and will be adding stuff as we find it.

  • Hydration packs by Thor and Moose Racing
  • Backpacks from American Kargo and Moose Racing
  • Neck warmers and High-Vis vests

Dual Sport Apparel


Choose from top of the line jackets, pants and our every own ProCycle T-shirts

  • Kathmandu jacket and pants
  • Urge overkill Jacket
  • Adventure Mesh jacket
  • Firstgear Thermosuit
  • Kilimanjaro jacket
  • And more!

Heated Gear


Stay warm on those long winter rides with top of the line heated gear.

  • First Gear heated clothing features Nickel Alloy heating technology
  • Venture heated gear comes standard with harness and controller
  • Heat Pump Vest and battery powered gloves also available
  • Check out our Seat warmer and Heated grips

Footwear


Our favorite dual sport boots have been tested and approved by the ProCycle staff.

  • New! 100115 Forma Adventure Boots
  • Icon Raiden DKR Boots
  • Alpinestars Scout Boots
  • Gaerne Balance Oiled boots

Accessories & Tools

Back to Top
New! 052316

Maps and Navigation




Check out our new Maps and Navigation page!

  • Butler Maps
  • Benchmark Maps
  • Delorme Maps
  • GPS Units
New! 052316

ProCycle NAVIGATOR


Navigation doesn't get any simpler than this. Here is the ProCycle 'binary' Navigator. Don't know which way to turn? Flip the NAVIGATOR and follow your nose. It is guaranteed to lead you somewhere. Probably some place you have never been.


$649.95 - $799.95

Garmin 390LM, 660LM and 665LM





Designed by riders for riders, the new Curvy Road routing leads you to the roads most fun on a motorcycle. This programming is standard on the Zumo 390LM. This unit is also equipped with a Tire Pressure Monitor System (valve caps purchased separately). It is bluetooth enabled so you can chat with your helmet on or just listen to the directions from your 390 so you can keep your eyes on the road where they should be.

Simply connect your Zumo with your cell phone and/or a bluetooth-enabled headset. Your Zumo unit will transmit voice prompts to your headset allowing you to hear the street names and navigation commands.

Each of these Zumo systems is designed with an on-board MP3 player so you can enjoy your music, podcasts, etc. Each Zumo also has a picture viewer so you can bring favorite photos along for the ride.

In addition to all these great features, each Zumo has a built-in trip computer with compass display. There's also a speed limit indicator so you know when to throttle down and avoid a ticket.

Another very handy tool is BaseCamp. This web based tool lets you create routes along specific roads and search for and save points of interest, restaurants and fuel stops. Upload your pre-planned trip to Zumo and follow along for a stress free ride. With BaseCamp you can combine track logs, waypoints, geotagged photos, YouTube videos and more into an adventure that you share online. Garmin Adventures is a free, interactive way to record and share your rides.

The Zumo 665LM has SiriusXM Satellite Radio, NavWeather and NavTraffic. Separate subscriptions required for these services.

Protected against water immersion for 30 minutes at a depth of 1 meter.

Click here to read the entire lifetime maps terms and conditions on the Garmin website.


$279.95

Voyager Moto-GPS from Trail Tech

WR250R/X
  • New! An on-bike GPS system with all the features you've come to expect from Trail Tech
  • View, Organize, Edit and Share Entire Trail Systems in 3D
  • Designed Specifically to Meet the Needs of Off-Road Riders
  • 240x400 LCD display - Readable even in Intense Sunlight
  • Crash Resistant, Off-Road Design
  • Upload Routes from any GPS
  • Customizable User Screens
  • Accurate Tracks, Even in the Toughest Terrain
  • Runs on Vehicle Power (or internal battery)
  • Back-lit for Operation in the Dark
  
Choose:


$139.95

Vapor Speedometer / Tachometer

WR250R/X
Standard Vapor

Stealth Vapor
Features:
  • Current Speed
  • Maximum Speed
  • Selectable MPH/KPH Display
  • Real-Time RPM Bar Graph
  • Numeric RPM Readout
  • Dual Programmable Shift Lights
  • Up to 20,000 RPM
  • Ambient Temperature
  • Engine Temperature (sensor included)
  • Dual Programmable Temp Lights
  • Clock, Hour Meter, Stop Watch, Ride Time, Accumulated Ride Time
  • Adjustable Distance, Permanent Odometer, Selectable Mile/Kilometer Display
  • Includes Power Connection, Accepts Any Power Input - AC/DC, Auto Switch to Internal Power if External is Removed, Permanent Memory Guarantees Data is Never Lost

Click here to read a 'Ride Review' on the Vapor


$54.95

Trail Tech Vapor Indicator Dashboard


  • Optional plastic dashboard with indicator lights protects the computer and places it in an optimum viewing position.
  • Included mounting bracket installs easily to triple clamp of most motorcycles.
  • Includes an assortment of indicator light lenses allowing customization to fit your needs.

Click here to read a 'Ride Review' on the Vapor & Indicator Dashboard by Jeff.

$51.95

Snapjack Portable Jack


The Snapjack is an easy to use, portable, sturdy jack for chain lubricating, adjustment and chain drive maintenance. Also simplifies cleaning. It can lift the rear tire up to 1/2" to allow the tire to spin freely. Includes front brake locking strap and handy carrying bag.


$8.95

Rim Protectors

Sold in pairs

Protect your wheels from scratches and dings caused by tire changing tools

Includes retrieval cord for easy use


$35.95

Mini-Morph Pump


The Mini-Morph is actually a bicycle pump, but is probably the best compact pump we have found for adventure / dual-sport riding. It has a fold-out foot and handle as well as a 4 inch hose so you can set it on the ground to pump. At only 10" long, it is small enough to pack anywhere.


$29.95

Tire Bead Breaker


Changing tubes or tires without the right tools can be a real chore. Don't fight your snug beads any longer, use this 27" long tool that opens to 7-3/4" to provide the leverage you need to easily break your tire bead. Constructed from heavy-duty steel with comfortable no-slip grips, this tool makes the job a snap.

$59.95

"Tread Doctor" Knobby Cutting Tool


Refresh your front or rear tire instead of throwing them out! Tread Doctor Lightweight heated tool lets you quickly cut new edges into your dull worn out knobby tires.


$47.90

Tire Iron Wrenches


Don't hit the trails without these tire irons. Each 10 inch forged steel tire iron has a hex wrench on one end. A 27mm for the rear and a 22mm for the front. Rounded spoon end minimizes pinched tubes and scarred rims.


$9.95

Tiedown Strap Rings

(Made in USA)
  • Constructed of stainless steel and is break-rated at 2,000 lbs. Far exceeds all other tie-down hooks or carabineers on the market
  • Attach tie-downs almost anywhere there is an 8mm bolt
  • Originally designed to give you a place to attach tie-downs to the triple clamp of a dirt bike but there are many other uses, such as bungee attachment points or in the bed of a truck or trailer, behind passenger peg bolts on a street bike or anywhere you can put a bolt.
  • Eye is large enough to accept the large size 3/8 in. coated tie-down hooks as well as carabineers
  • Packaged in pairs

$25.95

Clutch Holding Tool


clutch tool
Clutch holding tool
Made from medium carbon steel with hardened jaws. It feature spanner pins and the jaws open up to 5" wide. It's ideal for holding clutch hubs, flywheels, gears, sprockets, etc. From Motion Pro

$14.95

New! 030816

JIS Screwdriver Kit


The Phillips type screws used in Japanese motorcycles are actually Japanese Industrial Standard (JIS) screws are very easy to strip if you are using a regular Phillips screwdriver.

Here is a little kit that will make removing and replacing JIS screws much easier. A small portable handle with its own collection of 4 various bits, along with 2 each JIS No. 1, No. 2 and No. 3 bits. These will work in any other bit holders you may have and have a slight magnetic end to hold a screw while you start it.

$10.95

New! 103015

Super Siphon


The Super Siphon makes it easy to transfer fuel from one bike to another; simply shake the hose to prime it and get fuel moving. With 5.5 feet of hose it is no problem to reach whatever needs a bit of your gas. The hose is resistant to gasoline and any other hazardous chemicals. Roll it up and stuff it in your bag and you will be very happy when you need it one day.

Select Kit:



New! 070715

Tool Tube



Our Tool Tube mounts in place of the little stock tool carrier. The tube is made from 3 1/2" O.D. ABS pipe. It's held by 3 strong powder coated steel straps. Both ends are sealed with waterproof expanding plugs. This is the ideal way to carry those items you always want to have with you on every ride. Tube is approximately 13" long.

You can now order your Tool Tube with a Locking End cap, mini padlock and keys included, on the exposed end. Or you can order just the Locking End Cap and lock if you already have a Tool Tube.

$19.95

New! 060115

Deluxe Folding Saw


A must have when blazing new or old trails!

  • Soft rubber handle
  • Thumb latch release for safety
  • 8" blade, 9" folded length
  • Steel frame

$24.95

Helmet Lok



Small and compact enough to fit in your pocket, jacket or on our belt loop, HelmetLok is designed to lock your helmet to any bike using the handlebar or frame as an anchor point.

Don’t be weighed down carrying your helmet around anymore. Just use the simple to operate, carabineer-style HelmetLok and you can secure your helmet using the convenient outward opening mechanism. The combination can be reset to the number of your choice. Enjoy the security and freedom of HelmetLok.


$74.95

Factory Yamaha Service Manual

WR250R/X all

The genuine factory shop service and repair manual. This is the reference manual Yamaha dealers use in their service departments. It has all the necessary info to do any maintenance or repairs to your WR250R or X.


$33.95

010114

Mini Air Compressor


Portable 12v compressor is perfect for any tool kit. This unit weighs in at only 14oz and measures just 4"x2"x6".

Features a built in LED light and 0-120 psi gauge

• Comes with everything shown


$28.99

Trimax Rotor⁄Disk Lock


This lock is a must have for any rider. Features a 10mm hardened steel pin that will resist any attack.

Comes with carry pouch and a disc lock reminder cable. Includes three keys, one with a mini flashlight.

$6.95

Cycle Wipes


Cycle Wipes are pre-moistened and pre-folded towelettes made with a special non-woven "Dirt-Grabbing Mesh Fabric," which is a fancy way to say that they are soft, gentle, durable, and a lot safer than that old rag or paper towel.

Their formula contains no harmful ammonia and is specifically formulated for helmet face shields.


$19.95

Waterproof First Aid Kit


 

Kwik Tek waterproof first aid kit is the perfect size for your "Don't leave home without it" list.


$17.95

Warp 9 Valve Stem Puller Tool



This ultra-cool little tool is used to pull the valve stem through the hole on motorcycle rims saving your finger tips when changing tires, fixing flats or any time the tube has to come out of the rim. It threads inside the valve stem making it easier to pull through the rim hole. You can use it as a valve stem puller, valve core removal tool or a tire deflator.

Handle is CNC machined and has a threaded hole in each end, one to hold and protect the threaded end of the tool and one for a spare valve core (not included). Anodized blue for good looks and corrosion resistance.


$8.95

Motul C5 Chain Paste


A new innovative product from Motul. This chain lube comes in a brush applicator squeeze-tube bottle. It makes applying chain lube easy and less messy than spray on lubes. Chain Paste is easy to carry with you on those long trips.

  

$5.95

Motul M4 Hands Clean


A handy addition to the tool box or in your traveling pack. This is amazing stuff! Rub a little bit of the paste onto your dirty hands and it lifts the dirt right off. A little more rubbing turns it into dry flakes that brush away. M4 Hands Clean is not messy or greasy.

Didn't find what you are looking for?
We have millions of parts and accessories not listed on our site available from our vendors.