We are now accepting submissions for this year’s Calendar Photo Contest! Please upload your images here by 9am Pacific on September 16, 2025.
Helps protect vulnerable fork tube and seal from dust, dirt, and corrosive elements. Hook & loop (Velcro) fastening on back side makes installation or removal for cleaning a breeze.
For a top notch rebuild or re-valve of your rear shock use this high quality replacement seal head.
Complete kit to replace the bearings and seals in the KLR650 swingarm pivot.
| Kit Contents: | |
|---|---|
| Seal | 4 |
| Needle Bearing Shaft | 2 |
| Needle Bearing | 2 |
Billet aluminum lowering links. Lowers the rear suspension approximately 1 to 2 inches depending on application.
*Important when lowering the rear suspension you want to raise the fork tubes in the clamps an equal amount of inches that the rear is being lowered. That way your bike will sit level when done.
Note: We only recommend the 2" lowering links for lighter non-aggressive riders as they allow the tire to rub when near bottoming.
Disclaimer: Lowering the front and/or rear of your motorcycle will change the geometry and may affect the handling, use caution after making changes/adjustments.
Some KLR models from 2004 - 2007 may have a longer shank that do not allow the bolts to tighten to the bearing. If that is the case, we recommend the addition of either a 14 mm split type lock washer or a 15 mm flat washer under the nut of both link mounting bolts.
Damping Rod style forks are notorious for being too harsh, too mushy and too easy to bottom. Gold Valve Cartridge Emulators remedy this problem by controlling the compression damping with a tuneable valve. The Emulator sits on top of the damping rod and is held in place by the main spring.
Simply put; Emulators make damping rod forks perform like well-tuned cartridge forks. Installation and tuning for any condition or rider preference is very straight-forward.
Simple to install and completely tunable for all conditions and rider preferences.
The complete fork upgrade kit - Progressive Suspension springs and Race Tech emulators. Also includes a set of top quality fork seals and fork oil to complete the job. Everything you need to transform your mushy stock forks into suspension that really works.
Developed by the KLR suspenison experts at Cogent, this set of springs will stiffen up that wimpy KLR front end. Choose between .64 kg/mm springs (60% stiffer than stock) or .70 kg/mm units (75% stiffer than stock).
Will not work for 2014-Cur 'Mid-Year' New Edition Model
Race Tech has developed these fork springs specifically for the heavier weight of the KLR650.
Sold in pairs.
Not for 2014-2018 New Edition
Progressive springs offer a soft initial spring rate for a plush ride. Progressively wound design provides increased resistance to bottoming as spring compresses. These springs are significantly stiffer than the wimpy stock springs.
They will make a big improvement in the front forks while still delivering a smooth ride. Sold in pairs.
The Moab Pro-Series shock from Cogent Dynamics is the standard by which all other shocks are judged in the KLR world. With its superior performance and exceptional reliability, Moab Pro-Series shocks have literally conquered the world many times over. The staff at Cogent is as passionate about motorcycles as you are.
Spring duties are handled by a custom spring available in either Standard or Heavy-Duty weights. The Standard spring will be fine if you are under 250 pounds and don't ride with luggage or passengers often. If you regularly carry luggage boxes and/or a passenger and weigh over 250 pounds, you will probably prefer the Heavy-Duty spring. Call if you have any questions.
Because of the limited space with the reservoir, adjusting your preload is just about impossible and for that reason we only sell these units with the Cogent Hydraulic Preload Adjuster already installed!
For a true comfort and performance package, we highly recommend upgrading your front suspension at the same time.
If you have '87-'07 KLR, you MUST order new mounting bolt. Not required for 2008-2018 models.
Here's an easy way to add a Tach to your motorcycle.
We start with an Excel rim, Silver Warp 9 hub, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike. Optional upgrades include color anodized Warp 9 hubs or a factory Kawasaki hub and SUN rims available in 3 colors.
Our pro shop then laces and trues your wheel to perfection, giving you the highest quality custom wheel available.
Add a tire to your wheel order and we will throw in a tube and mount and balance it at no additional charge.
We start with an Excel rim, Silver Warp 9 hub, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike. Optional upgrades include color anodized Warp 9 hub or a factory Kawasaki hub and SUN rims available in 3 colors.
Our pro shop then laces and trues your wheel to perfection, giving you the highest quality custom wheel available.
Add a tire to your wheel order and we will throw in a tube and mount and balance it at no additional charge.
Warp 9 Supermoto wheels are built with billet hubs, 7000 series aluminum rims and laced and trued with stainless steel spokes and nipples.
Rear Includes Sprocket Carrier with 42T Sprocket Installed. Select your color or default to hub color choice.
Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.
These wheels will NOT fit the Tengai, or 'C' model KLR
Complete set of 'Adventure' wheels. These are the same rim sizes as used by the BMW GS and other big adventure bikes. The 19" front and wide 17" rear will give you great twisty road handling on the pavement while still being dual-sport friendly.
We start with Silver Excel or Sun rims, Warp 9 billet hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike.
Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.
Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.
We start with Silver Excel or Sun rims, Warp 9 billet hubs, and Buchanan's heavy gauge stainless steel spokes. Rims and spokes are precision machined for a perfect match to your bike.
Our pro shop then laces and trues your wheels to perfection, giving you the highest quality set of custom wheels available.
Add tires to your wheel order and we will throw in tubes and mount and balance them at no additional charge.
Billet sprocket carrier from Warp 9 Racing. Available in several colors.
Replacement retaining pins for the brake caliper. Includes 2 stock style brake pins.
Be sure to use some anti-seize on the threads when you install them.
Rear caliper only for DR350 and DR650.
Mount Barkbusters standard aluminum bar handguards to 1-1/8" motorcycle handlebars with the Barkbusters Tapered handlebar saddle clamp set.
What's in the box:
These are all you need to mount your current Barkbusters Handguards when you upgrade to a tapered oversized 1 1/8" handlebar.
Heavy-Duty Rear Master Cylinder Guard for any year model of the KLR. Wrap around design protects the precious master cylinder from damage.
Happy Trails exclusive Paris Dakar Nerf design for the ultimate in KLR650 protection. Loops of 5/8 inch tubular steel protect the expensive fuel tank and shrouds on your bike.
Included in this package is the fourth generation engine guard-highway peg combination giving the rider many more choices in riding positions for greater comfort mile after mile. The highway pegs provide bonus protection for the engine side cases, and they easily fold-up when not in use.
Crash bars by SW-MOTECH provide the necessary extra safety for tank, fairing and components. Designed specifically for these types of bikes, these accessories fit seamlessly with the lines of the vehicle and offer optimal cornering clearance. Bike-specific mounting systems enable reliable, easy installation onto original attachment points.
The IMS Pro-Series foot pegs are made of stainless steel and are hard coated to prevent drooping.
They are the original Cast 17-4 Stainless steel pegs that revolutionized the foot peg market.
These pegs are 50mm(1.95") x 78mm(3.1").
The IMS Super Stock pegs are the perfect choice for both the daily commuter and the rider-in-training. Their mellow tooth design keeps you planted while preventing wear on your soles. They are also perfect for young riders who don't need or want a more aggressive option.
Wider foot pegs for sure-footed comfort.
17-4 cast stainless steel.
| Width | 1.97" |
| Length | 3.18" |
Pivot Pegz have set a new standard in footpeg performance and quality and now they are even better. The new Mark 4 Pivot Pegz are wider & stronger. They have a unique multi-directional grip pattern and a wide, open design to reduce mud packing. The Mark 4 also incorporates new heavy duty, long life springs and they come with a lifetime warranty.
Pivot Pegz aim is to build the best footpegs in the world and they really do perform as good as they look. Here's a bonus for those riders with size 13 boots - the pivoting action of these pegs makes it easier to get your toe under the shift lever!
Designed and sculpted out of the best 7075 Billet aluminum by Pro Moto Billet elite engineers and machinists. Featuring Fastway's Patented adjustable height, traction, and camber options, the Evolution AIR footpegs are superior in every way. Fastway Evolution AIR pegs are designed to shed mud and debris, while being ultra strong.
These AIR pegs are offered in several colors, but some colors may require extra time, call for availability.
Mounting these pegs to your KLR takes just a bit of work. Please see link to instructions below to see what you will need to do. These instructions apply to the ADV and Evolution AIR Peg as well as the Evolution II pegs listed on the instructions.
The ultimate Adventure peg, from the folks at Fastway - Pro Moto Billet. This peg is big enough to stand on all day with no fatigue, it measures 2.25" front to back and is 4.75" wide.
In addition to the big size, you can also adjust the camber with their patented FKMS Kamber bolt. ´Tilt´ your pegs to increase comfort, or to give better squeeze on your bike. You can further customize them with 3 styles of patented adjustable threaded cleats. Take your traction from comfortable to gnarly. Fastway Adventure pegs come with two sets of F3 cleats, one standard, one long.
These Adventure pegs are offered in several colors, but some colors may require extra time, call for availability.
Mounting these pegs to your KLR takes just a bit of work.
Please see link to the instructions below. These apply to the ADV and Evolution AIR Peg as well as the Evolution II pegs referred to in the instructions.
Replacement Cleats for use with Fastway Pegs.
A must have for lowered bikes.
Each kit includes all necessary rubber components and brake pins.
Repair kit for your front disc brake caliper.
New from Warp 9, a full floating stock size rotor. These rotors have an additional hole for placement of a magnet for an electronic type speedo like the Vapor.
Includes a fresh set of brake rotor bolts.
Full braking power for your KLR650 supermoto conversion. 320mm oversized disc has a lightweight forged alloy center-hub and tough billet steel, 4mm thick brake rotor for maximum stopping power. Rotor rings include OD cooling groove and extra weight-reducing scraper holes and are riveted together with a nine-button sturdy rivet system.
Add bling and performance to your bike with a fresh new Warp 9 rear rotor!
Includes a fresh set of brake rotor bolts.
DOUBLE-H SINTERED METAL PADS
Provide maximum brake effect and last twice as long as organic pads
Feature the HH friction rating – the highest in the industry
DOUBLE-H SINTERED METAL PADS
Provide maximum brake effect and last twice as long as organic pads
Feature the HH friction rating – the highest in the industry
FunnelWeb ProLine Filter Highlights:
Like all FunnelWeb filters, the ProLine Filter features profile cut, single layer, single density foam that doubles the external surface area of the filter without increasing the original filter size. The ProLine Filter traps dirt, dust, sand and mud over a larger area on its outer surface, ensuring optimal air flow is maintained for maximized engine performance and reliability.
The single layer, single density polyurethane foam has the added advantage of being easy to clean and the ability to maintain its original shape after numerous washes. Overall, compared with conventional foam filters, FunnelWeb offers more protection from dirt ingestion, has longer service intervals and maintains high airflow rates when dirty.
Dual stage foam: 2 different pore sizes create more trapping area for even the smallest dust particles. Flame laminated foam: Both "Stages" are not glued but heat sealed to provide maximum air flow. Light color foam makes it easier to see where the filter oil has covered and where it has not.
Twin Air's patented design, high quality materials and superior construction deliver unbeatable performance and protection - and make Twin Air Filters the hands-down choice of more World and National Champions than all other filters combined.
An air filter is your engine's only protection against the elements, and your stock filter isn't up to the task. Replace it with a Twin Air - the #1 filter system proven on motocross tracks around the world.
Twin Air's fused layers of open-pore foam and fine inner foam trap even the smallest particles-without restricting airflow.
Have you lost or broken the stock air filter cage for your KLR? Maybe you need a spare? Here it is, the OEM cage that will fit any of the foam air filters on this page. This kit includes the cage and the mounting hardware.
Our own jet kit for the Mikuni TM40 carburetor.
Includes new main jets, pilot jets and a new needle with e-clip.
Comes with a printed Mikuni tuning manual and a jetting suggestion chart.
Not for the stock carburetor Fits TM40 conversions Only
Designed for use with stock engines using either stock or aftermarket exhaust and air filters.
Comes with everything you need to freshen up your carburetor.
Replace your worn out Mikuni stock drain hoses when they get old and brittle with a replacement hose set.
These 3/16" hoses are measured and pre-cut to length. Kit includes all hoses that fit the Mikuni carburetor.
Strip out the bowl screws on your KLR? Carb top screws get rusty? Here is a set of 4 allen screws and lock washers for the bowl and 4 allens and flat washers for the vacuum top.
Replacement socket head (Allen) screws in case you strip out the stock JIS heads on your TM40 bowl. The originals can be stripped out when doing any tuning or carburetor maintenance. Sold in a pack of four, all for the bowl.
Softer return spring for your TM40 carburetor.
This replaces the stock return spring that comes with the TM40 carburetor creating a 25% lighter throttle feel.
Seat Concepts seats are constructed using a foam material that is higher quality than OEM seat foam. Their proprietary formula is plush, while still offering the necessary amount of support. Their unique comfort and shape maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but tapers out towards the mid-point to distribute rider weight over a greater area.
These great features combine to offer you a custom seat feel, and provide greater enjoyment and increased range for long commutes, or Dual-Sport rides!
The Complete Seats come assembled with an high quslity aftermarket pan and ready to ride.
| Width: | 12 5/8" (321mm) |
| Height: | Same as OEM |
The Commuter seat maintains a similar contour to stock at the front of the seat so the rider’s legs are not spread farther apart, but has a dished seating position towards the mid-point to distribute rider weight over a greater area. This dished area is also wider than the stock seat to increase support. The passenger platform is the stock shape.
The Commuter seat is the best choice for extended pavement riding and mellow offroad. The unique shape and added width will provide greater enjoyment and increased range on a long commute, or Dual-Sport ride!
Transform your ride. MadStad's patented mounting system allows riders to adjust the height and angle of their motorcycle windshield resulting in much smoother airflow, better wind protection and a more comfortable ride than any fixed windshield can provide.
What's included and what's not included in the kit:
Their complete drop-in system is custom-made for your bike and includes everything needed to mount and position the shield.
Your bike will not require any modification.
The MadStad adjustable brackets sit out in front of your fairing on black fly screen which attaches in place of the factory shield. With the windshield now separated from the front of the bike and the fly screen helping to deflect wind up from underneath, you have total control over the shield height, angle and airflow. This lets you dial in a smooth ride and quieter cockpit far better than any fixed windshield can provide.
This product is a windscreen lip that will offer more protection from the wind and weather. These mount directly onto your existing windscreen.
Standard Lip Smoke
The long over-due rally shield for the 2008-on KLR650 is finally here!
Parabellum uses 4 steel brackets mounted to factory locations as well as our stand-off windshield design to ensure the customer doesn’t have to drill extra holes in the cowling but still achieves that iconic upright look of the real Dakar Rally bikes.
The Rally shield protects the rider’s torso/chest from air, cold, roost, branches and bushes while leaving the rider’s head/helmet in clean air. We recommend the Rally shield for riders seeking some protection, but prefer to be off-road.
The Rally shield is made from 1/8 inch cast acrylic and is 11.5 inches wide at the bottom and 17 inches tall.
The new Touring windshield for the 2008-on Kawasaki KLR650 has been completely redesigned to both improve protection as well as appearance.
Parabellum utilizes the stock windshield screw locations with our angled brackets to mount the newly designed shield. The windshield uses stand-off technology so the shield is more upright. This allows a smaller shield to give more protection. This also keeps the top edge of the shield away from the rider when standing on the pegs and using other off-road riding techniques.
The Parabellum Touring shield for the KLR is also significantly wider and taller than the factory windshield maximizing comfort and wind protection.
The windshield measures 14.5 inches wide and is available in two heights. We recommend this windshield for those seeking maximum protection. The shield is made of 1/8 inch cast acrylic and offered in clear or tint.
The Powercore 4 spark arrestor muffler. FMF developed the Powercore 4 to increase the horsepower and torque throughout the entire power curve. Highest quality packing for long life. Removable spark arrestor included. Louder than the Q4. Approximately 99db stock or about 94db with optional Quiet Insert installed.
Delayed stock from manufacturer, please ask for availability.
No repacking required. The LeoVince X3 Enduro is made with TIG welded stainless steel internals and aluminum outer shell. It features a semi-direct chamber design that is maintenance free. It's quiet too! Our own in-house testing showed a 84dB sound level using the USFS J1287 testing procedure. That is a bit louder than stock but significantly quieter than other aftermarket mufflers. It includes a certified Spark-Arrester. This muffler requires a stock muffler joint gasket when used with either the stock headpipe or the FMF headpipe.
The FMF Powerbomb is a four stroke header pipe unit that has a unique bulge precisely located in the header system. A "pre-muffler" of sorts, the Power Bomb actually lowers sound output because it creates more surface area to absorb the sound medium (exhaust). The surface area of the perforated core lets the sound exit into the absorbing material (steel wool packing) and then allows the air to expand, cool and ramp back up with the higher pressure air. The result? The FMF Powerbomb is instrumental in reducing the decibel level on any four stroke and because of the expansion and contraction on exhaust through the system, the flow has been increased by nearly 10%. That means more power throughout the range.
Features:
This is a new gasket for the cylinder head - head pipe junction. Installing a new one with your new header will ensure a good seal and no exhaust leak.
Voyager Pro, The Connected Rider’s GPS. Trail Tech offers a variety of model specific and universal kits for complete vehicle integration. All kits include mounting hardware, tach sensor, and power connection. Temperature and wheel sensors vary by kit, see kit contents for details. Adventure Begins Here!
Trail Tech provides a one year warranty and unlimited free phone and email support.
The SignalMinder unit is designed as a plug-in accessory for many Japanese bikes. SignalMinder uses a microprocessor to cancel the turn signals at one of three selectable time outs; 10, 20 or 30 seconds.
You can also make it so that all four of your signal lights also act as running lights and establish a dual-channel system on your bike. With the dual-channel system, when you activate the RIGHT turn signal three times in succession, you get 4-way hazard flash lights.
Connecting the 12 volt supply from the brakes to the SignalMinder, also allows for a brake flash option.
There are many options and configurations using this electronic tool.
No wire cutting required. The kit includes Scotchlok connectors to tap into existing wires.
Higher pressure in the cooling system, raises the coolant boiling point and increases protection from coolant loss due to overheating.
23 PSI - 1.6 Bar.
A high quality torsion spring puts more consistent force on the tensioner lever. Requires drilling a small hole in the case to seat the spring. Drill bit included.
Eagle Manufacturing balancer lever kit, featuring top-quality components.
The Eagle Manufacturing idle-shaft lever and spring is designed to replace the less durable stock unit. The one-piece lever is precision machined from 17-4PH hardened stainless steel, ensuring exceptional strength. The kit also includes a stainless doohickey and a torsion spring with a drill bit, replacing the previous extension springs with a superior torsion spring for enhanced durability.
A direct replacement for the stock KLR hoses that tend to crack and leak after a few years.
These silicone hoses are custom made for us. Silicon hoses operate at much higher temperatures and pressures than other rubbers, they don't perish, and they look great!
Our very own version of the popular thermostat bypass for the KLR. Gives faster warm up and more constant engine temperatures. Eliminates the wildly fluctuating engine temperature gauge. A more controlled and constant temperature is easier on your piston and cylinder and may prevent or reduce oil consumption. We use a 180 degree thermostat instead of the stock (too cold!) 160 degree unit. Warmer coolant temperature promotes better fuel vaporization and can increase fuel economy.
Our bypass system mounts the new thermostat in a small billet extension housing right where the stock thermostat is now. There is no bulky external housing to hang off the motor. The bypass hose tees in to the lower radiator hose using a length of quality high temperature silicone hose. It all makes for a clean simple installation.
The complete Thermo Control package - Our in-house designed Thermostat Bypass kit, a set of Custom Silicone Hoses and a Hi-Pressure Radiator Cap. All combined to help your KLR cooling system be at the top of its game. The Thermostat Bypass kit includes a thermostat with a higher temperature rating that will keep the motor more in its happy spot.
The Silicone hoses are stronger than the stock rubber units and will better resist cracking and leaking.
Complete set of friction plates, HD springs and steel separator plates prevent premature driven plate wear, oil muddying and loss of stack height. Built with swaged aluminum carriers that spread the load on the clutch basket and prevent clutch basket "dogging". Anti-swell, alloy impregnated heavy-duty cork-based facings for smooth clutch take-up. Allows modulation, unlike paper clutches which tend to snatch.
The Rekluse EXP employs the same EXP assembly as their premier product; the difference is that it fits into your stock clutch assembly, saving you money! Now you can enjoy the benefits of Rekluse auto-clutch technology on your KLR.
An auto-clutch automatically feeds out the engagement of the clutch using centrifugal force. This allows you to start and stop without touching the clutch lever. The automatic feed is fully adjustable to suit the rider's needs while retaining full manual override with the clutch lever. This automatic feed delivers easier on/off throttle transitions, improved traction, better control, and more confidence.
Generator cover gasket to seal up the cover once you have your new Doohickey in place. New OEM gasket. What else can we say? If in doubt, put in a new one.
Put fresh O-rings on your KLR when you do your next oil change. Here you have new ones for the Oil Filler and the Oil Filter Housing Cover.
Replacing your clutch or removing that side cover for any reason? You are going to need a new gasket for the cover to ensure a leak-free assembly.
K&L® shims exceed the maximum of the Apparent Rockwell Hardness "C" scale. Shims average 47.0 compared to the 46.0 maximum.
This kit fits KLR650 87-18 as well as other brands and models , please verify correct size for your model before purchase.
29mm diameter - Includes two valve shims of each size 2.30, 2.40, 2.50, 2.55, 2.60, 2.70, 2.80, 2.90, 3.00 and 3.10. In a shim box.
20 shims in total. From K&L.
BMW / KAWASAKI / YAMAHA
A pair of stage 2 intake and exhaust 'drop-in' camshafts. Great mid-range and top-end increase. Uses stock valve springs. Modifying the airbox and rejetting will be required to realize power improvements with these cams. These are new billet cams - No core return required!
Stock and typical after market drain plugs can protrude past some skid plates. This steel low profile drain plug stays inside the skid plate so it can't be snagged by passing objects.
Comes with 4 crush washers.
Providing unbeatable performance and exceptional value, Hiflofiltro is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.
You pay $3.59 per filter with our value 5-pack!
Superior Filtration:
This should be the last oil filter you will ever buy. Made from laser cut, medical grade, 304 stainless steel micronic filter cloth, this filter provides 200% more filter area in many cases. Most good paper filters will pass particles in the 90 to 95 micron range, and some tested, as much as 300 microns. Sand is about 125 microns and a white blood cell approximately 25 microns. Flo's stainless filter catches items down to 35 microns "absolute", which is about 3 times better than most good paper or brass filters. The pleat seam is welded, able to withstand up to 600 degrees in our filter, not glued, like paper filters.
This is all you need to not only change your oil, but protect your motor as well. We include a magnetic drain plug, to help catch stray metal pieces, a 5-pack of oil filters, and new O-Rings to replace any you have that may be leaking or worn.
E3 Resistor Spark Plugs
The unique design of the electrode maximizes the power generated by the spark plug through Diamond Fire technology. This electrode combines advanced performance capabilities and innovative technology to enhance the shape of the flame kernel. Consequently, the flame front ignites the air/fuel mixture more rapidly, accelerates heat transfer into the combustion chamber, and creates a more concentrated pressure front, facilitating a quicker pressure rise during the cylinder power stroke. The outcome is a more efficient combustion process and improved engine performance, making this a truly premium spark plug.
The KLR650 is rather hard on the cush drive rubbers. Replace these any time you feel excessive play in the sprocket hub. Excessively worn dampers can cause the cush hub bearing to fail - which will ruin your sprocket carrier.
A pack of 10 Fuji style lock nuts to put on the sprocket of your KLR650. These are an 8 mm, flanged type nut that will keep your sprocket snug and tight.
Quality rear steel sprockets.
Clymer repair manuals provides step-by-step procedures based upon the complete disassembly of the motorcycle. This hands-on experience combined with extensive research results in a manual that is both user-friendly and detailed. Contains hundreds of original photos, exploded views, drawings, specifications and charts to illustrate each job. Also features shortcut repairs and high-performance modifications.
Whether you're interested in routine maintenance tasks, troubleshooting, or more extensive repairs, the in-depth coverage provides indispensable information about your KLR650.
Your automatic cam chain tensioner is spring loaded. This can make it difficult to install as it wants to extend before you have it bolted into place. This handy tool will back off the cam chain tensioner mechanism and hold it for you. No more awkward 3-handed contortions are required to get the tensioner installed.
The Nomadic Rack for the early generation KLR650. CNC laser cut from 3/16" 5052 aluminum with a large 12" x 18" mounting surface area. Sand blasted and then powder coated black to give it a shot peened look. This rack is an easy installation with no modifications required. There are multiple strap slots for securing gear bags and cargo. Rack is compatible with RotoPax mount. All hardware and instructions included.
Packages available include Rack with the RotoPax Mount or if you really want it all, you can order the Rack, Mount and a Fuel or Water Container.
Innovative design makes tool easier and more secure to use than old fashioned pin-aligned drivers
Use this installation tool from Cogent to be sure that your Cogent Drop-in Dynamic Cartridges are installed correctly. A strong magnet in the end holds the cartridge firmly while you lower it into your fork leg. Then slide the spring over the tool until it holds the DDC down, then gently remove the tool. That simple. Never again question if it is properly seated on the damper rod.
Works equally well for removal when you need to change your fork oil. Also works great with Race Tech Emulators.
New from Twin Air, a forged aluminum KLR650 folding shift lever with your choice of Black, Blue, or Green tip. These are 3/4" longer than the stock lever which makes for easier shifting while standing, as well as for those with a larger boot size.
Replacement shift lever with folding tip.
Warp 9 Flex Brake Levers are machined Billet, anodized and hinged brake levers with CNC machined master cylinder interfaces.
Adjustable reach allows customization to the rider’s hand size.
Double hinge design allows lever to flex out of the way in most impact situations.
Pushrod or Bearing contact styles for smooth brake modulation.
Titanium Pivot / Black levers with laser-etched Warp 9 logo CNC Billet Brake pedal.
A quality replacement speedometer cable.
A quality set of replacement throttle cables from Motion Pro.
For adjusting valve clearance on twin cam models. Holds valve spring collar down so adjusting pads can be removed. From Motion Pro, made from hardened alloy steel.
Don't hit the trails without these tire irons. Each 10 inch forged steel tire iron has a hex wrench on one end. A 22mm for the front and a 24mm for the rear for older generation KLRs ('87 - '07) or a 19mm for the front and a 27mm for the rear for the new generation machines ('08 and newer). Rounded spoon end minimizes pinched tubes and scarred rims.
All the advantages of a flatslide pumper carburetor at a much friendlier price than a Keihin FCR.
Our complete genuine Mikuni TM40 pumper carburetor kit comes with alloy adapter rings bonded to the carburetor body for a firm reliable fit in the stock air boots. We also include a remote mounted choke knob, complete instructions along with a wide range of main jets and pilot jets for fine tuning or to accommodate bikes with extensive modifications.
ProCycle Dashboard designed to power multiple electronic devices. It can also be used for accessory lights, heated grips or gear, whatever you like. You can also use the two pre-drilled holes to attach a RAM mount and place your phone or GPS unit on that while charging.
The dash panel is manufactured from mild steel and powder coated black. Also included are 2 weather resistant green LED rocker switches, and a voltmeter with two 4.2 amp weather resistant USB ports, a wiring harness with a built in 10 amp fuse/holder, and complete instructions. Everything you need to mount it and connect the outlets back to the battery.
Additional protection against rocks and contact with the ground for the engine: the high-quality, aluminium alloy engine guard shows what it's capable of off the street, but provides extra safety and an individualized look on the streets, too. State-of-the-art production gives these bike-specific protectors a secure fit. The installation on frame mounting points lends additional stability and allows for easy installation.
A replacement gas cap for your IMS tank. Newly redesigned to resist damage from new fuel additives that were hard on the seal in the old style cap.
