Same-day shipping cutoff: Noon Pacific Time

XT250: Lighting

XT250

In 2008 Yamaha discontinued the XT225 & re-introduced the XT250.  Powering the XT250 is a 249cc, air cooled, SOHC, single cylinder engine.  Helping drive the XT250 is a five speed transmission & wet multi-disk clutch.  In 2013 the US version XT250 gained fuel injection.

Chain Size:   Front Sprocket:   Rear Sprocket:   Front Tire:   Rear Tire:   Spark Plug:  
428 x 128 15T 48T 2.75-21 120/80-18 DR7EA
           

 

Lighting

This plug-n-play kit includes sealed LED headlight assembly and adjustable mounting brackets specifically designed for the 2008-2018 Yamaha XT250. The new design for the black headlight produces more light and has much more uniform beam pattern when compared to the previous version. New design currently only available in black, chrome may be available in the near future. No wiring, soldering, resistors, trimming, drilling, or fabrication required.

  • Low Beam: 20W, 3,600 Lumens
  • High Beam: 40W, 4,500 Lumens
  • Color Temperature: 6,500k
  • CREE LED Chips
  • DOT & SAE Approved
  • CE, RoHS, ISO9002, IP67
Ships in 3-5 business days
$149.95

This is the ultimate headlight upgrade for your XT250! It’s a plug & play kit which includes the newly released Morimoto round headlight with preassembled aim adjustable mounting bracket set. Installation takes five minutes and the light output is phenomenal.

Low Beam: 2,400 Lumens, 20 Watts
High Beam: 4,300 Lumens, 35 Watts
Color Temperature: 5,000K
Warranty: 5 Years

Ships same business day
$329.95

Now available in the original version or the Ultra version. The original uses the front two emitters for low beam and then switches to the rear two emitters for high beam. The Ultra uses the front two emitters for low beam and then runs all 4 emitters on high beam at a reduced wattage. Wattage is 38 watts on low and 38 watts on high.

This bulb uses 4 Cree XHP 50 emitters, capable of more than 2500 lumens each. At 5000 lumens on each function, this is the brightest Cyclops H4 bulb.

  • All metal construction for bases and collars
  • Better thermal efficiency 
  • Better beam pattern distinction between high and low beams
  • 5600k
  • 38 watts 
  • Removable metal base plate for easy install.
  • Screw on connectors at driver
  • Standard H4 connector
  • High/Low Beams

*UNIVERSAL PART, PLEASE CHECK YOUR APPLICATION FOR FITMENT

Choose Bulb
Ships same business day
$79.95

This is a standard H4 bulb that has a 80 watt low beam and a 100 watt high beam. This is an easy lighting upgrade that should not over tax a stock charging system.

Ships same business day
$16.95
Universal fit. May require additional adjustment or modification.

So you say you want more light for your dual sport? Give this 7"DOT legal Rally light a try and light it up like a freight train! HIGH/LOW operation and SAE/DOT/E4 approved. 
 This light does not have the large Cyclops logos shown on one of the images.

  • Race Inspired Design
  • Hella reflector, made in Germany  stamped SAE/E4
  • Lightweight Aluminum Frame
  • Plug and Play for Bikes with H4 Bulbs.
  • Available with optional mounting plate for computer or GPS
  • Easily converted to HID if desired, uses an H4 bulb
  • For bikes that are not H4 (XR650R), a simple H4 plug available at any auto parts store will allow you to use this light.
  • Now the panel on top of the light for mounting speedos/gps's etc is included, (This is a platform, not actual GPS mount.)


Optional 10.0 Lumen LED High/Low Upgrade  and now the Phoenix LED complete headlight for the ultimate DOT headlight
The stock lamp that comes with this rally light is great, but you can get  well over double the brightness  with the LED upgrade at a substantially lower power draw. Note if your bike is ac powered at the headlight you will need the rectifier for the LED option.. AKA carbureted KTM's CRFX and XR400/650.. others may apply.

Ships in 1-2 weeks
$475.95
Universal fit. May require additional adjustment or modification.

Each 10 watt Solstice Solo produces 900 lumens, which is roughly equal to a 50 watt halogen bulb. These are one of the brightest LED off road lamps on the market. The rugged and compact 2” x 2” square die-cast aluminum housing makes mounting easy. The Solstice Solo also features a 4 sided channel design that allows you to interlink it on all four sides with other Solstice Solo pods. Includes stainless steel mounting bracket and waterproof connection. Choose narrow, medium, wide or elliptical light beam pattern. Our favorite is the Elliptical pattern which is wide and flat, putting most of the light where you need it the most.

Sold each.

Add RAM Light Mounts
Ships same business day
$139.95
Universal fit. May require additional adjustment or modification.

A game changer in compact auxiliary lights. High output, compact and lightweight!

The New Cyclops Aurora 2 inch lights rated at 4000 lumens for the a set. Using an authentic top binned Cree XHP50 emitter these lights pack a punch!

Available with or without the daytime Running light option (DRL) which can also be a front blinker. (you may need a led flasher to do that)

Like all Cyclops lights we only use the Best Real Cree emitters. R113, R10 TUV and Emark certified IP68 rated.

Includes a full relayed wire harness designed for a Motorcycle. No need to use a switch if running the DRL version, also no need for a switch if using the skene dimmer or want the lights on in high beam and off in low beam. The factory switch will work for these applications. Unless you have a LED factory headlight in a R1200gs,850Gs or KTM1290 these bikes will require our Raider canbus controller.

Look at these quality features!

  • Solid Steel cradle mount. No broken or cracked mounts!
  • CNC machined aluminum housings
  • Polycarbonate lenses, Break-proof!
  • 15 degree beam patterns, a great choice for distance and field of view.
  • 19 watts each
  • 2000 lumens a piece, 4000 lumens for the set.
  • Includes a relayed wire harness
  • Input voltage 9-30VDC
  • R113, R10 TUV and Emark certified
  • IP68 Rated
Ships in 3-5 business days
$248.95
Universal fit. May require additional adjustment or modification.

The little light that can! Don't be fooled by the mini size, big light comes out of this bad boy.

New design for 2021 featuring more durable, positive push button switch, metal handle bar mounts and options to allow this light to work for many applications. Switch, cords, strain reliefs and optics for optimal water resistance, ruggedness and performance.

It uses a go pro type mount with an aluminum platform to mount almost anywhere. Also included is a handle bar mount (mount on center of bars). No plastic parts on the light head.

Choose the optional SS platform to mount the light above the bars per two of the identified photos. (Fits all stock 7/8 and 1 1/8 bars. Not for flexbars)

Included is a rubber covered handle bar mounted switch with 2 power level settings 50% and full on.

Combo beam pattern, spot and wide beam in one light.

Compatible with Go Pro mounts, Perfect for modern EFI bikes.

  • Includes basic wire harness
  • 5000 lumens, 
  • Spot and flood beam in one light
  • 28 watt power draw.
  • 2 year warranty, does not include crash damage, bent and or broken wires.
  • 4 inches long by 1.350 high
Choose Kit
Ships in 1-2 weeks
$219.95
Universal fit. May require additional adjustment or modification.

Now a lifetime warrantied LED light set at a budget friendly price.. and Not made in China.

The new Cyclops Pegasus led light set comes complete with a high quality relayed wire harness and a potent combo light beam pattern.

We are able to offer this fantastic light at a great price due to a one piece optic and sealed beam construction, eliminating extra parts and creating a very durable and high performance light.

These lights in white feature 7 watt emitters (28 watts per light) with two 10 degree and two 25 degree optics, Good for 500 plus ft of lighting (white).

The amber version is a Cree 3 watt emitters (12 watts per light).

This combo beam pattern offers good forward lighting and extremely good conspicuity.

The light set is available in white 5600K or a extremely bright Amber, perfect to allow those autos to see you. Lightweight and robust at 2.75 inches with a single stud mounting, they fit just about anywhere you would like to mount your lights.

Specs:

  • Canbus compatible, full relayed wire harness included
  • 5000 plus lumens for the set
  • 28 watt draw per white light, 12 watt draw per amber light
  • ISO 67... waterproof
  • 5600K (white 33% brighter than Amber)
  • Life time warrantied
  • Sold as a pair
Backordered: Waiting for stock from suppliers to fulfill orders placed on or after July 2024
$318.95
Universal fit. May require additional adjustment or modification.

The Mojave Series LED Racing Lights have been designed to survive and operate in extreme conditions. lights feature a heavy duty housing that can withstand hard impacts and a lens that is twice as thick as traditional lights. The light includes three different replaceable lens (Flood, Spot, and Combo).

Features:

  • Heavy Duty Design​
  • IP69K Rating​
  • Flood, Spot / Flood, & Spot Lens Included
  • Stainless Steel Bracket & Hardware​
  • 5,000k Light Color – Natural Daylight
  • Heavy Duty, black, steel Left & Right mounting brackets to bolt directly to your lower triple clamp.
  • Harness with Switch

Kit includes: 2x LED Aux lights with harness and switch, 2x Light mounting brackets and bolts, Switch mounting bracket

 This kit will work with the 6.6 Gallon Acerbis fuel tank for the DR650. You must run the light brackets inwards in order for there to be proper clearance with the 6.6. Gallon tank.

Kit includes: 2" x 3" LED light pods. Harness with switch and mounting bracket. Left & Right mounting brackets. 4x lower triple clamp bolts

Choose Light Size
Please contact us for availability information
$219.95
Universal fit. May require additional adjustment or modification.

This kit includes 2 auxiliary light mount brackets. These brackets are designed to mount to most lower triple clamps. New longer bolts are supplied to accommodate the thickness of the bracket. These brackets are powder coated black for a sleek and long lasting finish. The brackets can be used to put the addition of new lights to the outside of your forks or swap the brackets and the lights can be mounted inward to give more clearance for bigger shrouds or fuel tanks.

Ships same business day
$43.95

JNS has come up with another great addition for the little XT250. Auxiliary light mounts that keep the lights up high for great projection, but still good and tight to the bike for protection. These heavy duty 1/8" stainless steel mounts put your lights out of harms way without interfering with controls, body work, or the fuel tank. Includes four longer upper triple clamp bolts. Everything but the lights themselves to light your way through the darkness.

Ships same business day
$27.95
Universal fit. May require additional adjustment or modification.

The perfect solution for mounting those LED auxiliary lights. The base of the RAM mount is held by your mirror. This puts the light where you can easily adjust the angle for different riding situations. This mount fits VisionX Solstice lights or any other light with a 6mm or 1/4" hole in the mounting bracket.

This is for Mount Only. Sold individually.

10 Watt LED lights sold separately.

Ships in 3-5 business days
$39.95
XT250 '08 - '25

This device will pulse your brake light automatically. There are over 1000 possible pattern combinations with individually programmable Flash Speeds, Pre-Delay, and Flash Durations, as well as a disable feature to disable the unit. This device gives the end user the widest range of possibilities for customizing your tail light safety flash. With simple programming setup using only your brake lever, their is no disassembly or removing of the seat required to change the programming on the device.

Features:

  • Independently programmable flash speed, flash duration, and pre-delay
  • Works for LED or Standard Bulb Tail Lights
  • All Solid State design
  • Meets or exceeds OEM load rating specifications
  • Over 1000 possible flash pattern combinations
  • Simple programming setup with your brake lever
  • Extremely compact unit size; 20mm x 20mm x 12mm
Ships same business day
$59.95
Universal fit. May require additional adjustment or modification.

This frame includes six, white, full-spectrum LED bulbs on a 6-inch strip for bright illumination of your license plate. It is made in a sturdy cast aluminum, and is powder coated with a durable black finish.

Outside frame dimensions are 7.25" in. wide by 4.2". Center to center mounting hole distance is 5.7 in. All mounting hardware is included.

Ships same business day
$29.95
Universal fit. May require additional adjustment or modification.
  • Waterproof, long-lasting marker light bar uses less power
  • Features 180° visibility
  • White LED color
  • Can be used in any position; refraction of light depends on position
  • Measures 38mm x 9.8mm x 18mm
  • Not for use where DOT lighting is required.
Ships same business day
$17.95
Universal fit. May require additional adjustment or modification.

License plate light with 5 LEDs. Compact and easy to mount. Meets plate illumination requirements with super white light.

This is for the LED license plate light ONLY.

Ships same business day
$22.95
Universal fit. May require additional adjustment or modification.

License plate bolt with bright white LED light. The simple way to light up your plate.

  • License plate mounting bolts in a hex shape
  • White LED light in the center of each bolt
  • Non-flashing, made for continuous on, to light license plate
Choose Color
Ships in 3-5 business days
$31.95
Universal fit. May require additional adjustment or modification.

Easily turn your blinkers into additional running lights and brake lights (rear) for added visibility.

White light in the front and red in the rear. Rear red running lights and bright red brake lights. You can omit the running and brake lights if you wish and still have the best blinkers on the market.

Dazzling bright Amber blinker functions. 

All in a spring-loaded stock to prevent damage from a tip over, crash or impact with brush, trees etc. They will bend 360 degrees, but are stiff, durable and nearly unbreakable.

If you have a single indicator light for the blinkers that is not built into the display and is not LED you will need the diode kit (AKA DR650)  If it is built in to the speedo display it should not require the diode kit.

Available in a generic kit with Bullet connectors supplied. Great for your DR or almost any other bike with a single post blinker setup. These will work well on bikes that use a flasher, but you might have to add the female side of the connectors that are included in the kit.

Not for Yamaha T7, see model specific listing

Choose Option
Add Diode Kit
Add LED Flasher
Ships in 1-2 weeks
$225.95
Universal fit. May require additional adjustment or modification.

The Barkbuster LED Indicator Lights for Jet, Storm & VPS Plastic Handguards to increase your visibility and safety using 15 high intensity LEDs that mount directly to the plastic handguard shells. Super bright auxiliary signals will make your directional intentions clear to upcoming traffic. The LED indicators are very low draw and E marked for road use.

Features:

  • High intensity LEDs with amber lenses
  • Intended for use as indicators/turn signals
  • E mark approved for use as an indicator light
  • 15 LEDs per indicator amplifies your visibility to other traffic
  • Enhances safety by imrproving clarity of planned directional changes
  • Very efficient performance with low power draw
  • Designed for use on the upper surface of Barkbusters Jet handguard plastics
  • Compatible with the upper and lower surface of VPS & Storm plastics

What's in the box:

  • Barkbusters LED indicators in amber (pair)
  • Mounting materials
  • Installation instructions

Please Note: Not compatible with the electrical system on the Honda Africa Twin CRF1000L

Choose Color
Add Resistor Set
Ships same business day
$74.95
Universal fit. May require additional adjustment or modification.

Eight ultra-bright amber LED lights in a sleek design. Flexible stem helps absorb the occasional hit. Available in 2 pack or 4 pack

Recommended to use resistor for proper turn signal flash rate.

Specifications

  • Comes with mounting hardware.
  • Measures 4" long with base and 1" wide at the lights.
Choose Pack
Add Resistor Kit
Ships same business day
$45.95
Universal fit. May require additional adjustment or modification.

These signals have short rubberized flexible stems and bright mini halogen bulbs.

Choose Pack
Add Replacement Bulbs
Ships same business day
$33.95
Universal fit. May require additional adjustment or modification.

These Sequential Turn Signals are available in a 2 pack or 4 pack short stem with 7 LEDs.

Matte Black, plastic body with smoke lens and 8mm mount bolt.

Specifications

  • E-marked.
  • Short Stem: 75mm x 15mm
Choose Quantity
Ships same business day
$36.95
Universal fit. May require additional adjustment or modification.

Triangle/Teardrop style signals with LEDs. Mounts on any flat surface to keep out of the way of brush, branches, and your exhaust system. Requires LED flasher or LED turn signal resistors to flash properly. 

  • Fits on the fender with screws for secure installation
  • Rubber mount base fits even curved surfaces
  • Terminals and bolts are included for installation
  • Comes in pairs
  • Works on 12V AC/DC
Ships in 3-5 business days
$49.95
Universal fit. May require additional adjustment or modification.

You may have noticed after adding aftermarket turn signals (especially LED units) that your blink rate has significantly increased. OEM flashers are designed for standard bulbs which draw a few watts each, much more than typical aftermarket bulbs or LED signals. This device is an effective alternative to using load resistors because it consumes considerably less watts, consumes less space, and does not generate excessive heat.

The plug is exactly the same as the OEM unit making swap outs a cinch. No wiring changes, cutting and adding connectors. Just plug it in and you will have a steady flash at the DOT OEM rate regardless of what signal bulbs you use. It is an all solid state design and will blink correctly with loads all the way down to 0.1W / 0.01A.

  Not for any DRZ400 or Royal Enfield Himalayan

Ships same business day
$29.95
Universal fit. May require additional adjustment or modification.

Works on AC and DC lighting systems

  Not compatible with any DRZ400

Ships same business day
$20.95
XT250 '08 - '21

The SignalMinder unit is designed as a plug-in accessory for many Japanese bikes. SignalMinder uses a microprocessor to cancel the turn signals at one of three selectable time outs; 10, 20 or 30 seconds.

You can also make it so that all four of your signal lights also act as running lights and establish a dual-channel system on your bike. With the dual-channel system, when you activate the RIGHT turn signal three times in succession, you get 4-way hazard flash lights.

Connecting the 12 volt supply from the brakes to the SignalMinder, also allows for a brake flash option.

There are many options and configurations using this electronic tool.

No wire cutting required. The kit includes Scotchlok connectors to tap into existing wires.

Please contact us for availability information
$109.95
Universal fit. May require additional adjustment or modification.

The Barkbusters 10 OHM Resistor Set for LED Indicator Lights will correct the flash rate of your auxiliary signal lights. Ready to plug in connectors make installation a breeze. These resistors are intended for Barkbusters LED Indicator Lights.

Features:

  • 10 OHM
  • Intended for Barkbusters LED Indicator Lights
  • Corrects flash rate of LED signals
  • Flash rate: 90 (+/- 30) times per minute
Ships same business day
$14.95
Universal fit. May require additional adjustment or modification.

This devices allows any two wire after market LED turn signal indicators to operate as running lights (always on), and will blink on / off when the turn signal switch is activated. It is highly recommended to use this product with the Fixed Rate Turn Signal Flasher. This device, as well as aftermarket turn signals, use much less current than stock turn signals, thus an increased flash rate will occur. Load resistors or a fixed rate turn signal flasher will get your flashers operating at the normal flash rate again.

Each package contains two separate adapter boxes, good for operating both turn signals, left and right of either the front OR rear of your motorcycle. You will need to purchase a 2nd kit if doing the Front AND Rear of the motorcycle.

This device is universal; designed to work for any motorcycle with a DC electrical system. Kit comes with bullet connectors to wire in manually. Works with any two wire non-sequential aftermarket LED turn signal indicators.

Ships same business day
$39.95
Universal fit. May require additional adjustment or modification.
  • Eliminates the need to cut and splice wiring when using aftermarket turn signals or marker lights
  • Plug into the OEM turn signal plug and then use bullet style connectors used on aftermarket lights
  • To verify proper fitment, compare connector photos to OEM connector
  • Sold in pairs

Fits Most Models

Choose Brand
Ships in 3-5 business days
$18.95
Universal fit. May require additional adjustment or modification.

This Diode Kit is only necessary if you have a single dash indicator for your turn signals. One dash light for both left and right signals (such as on the DR650).

This kit allows power to flow in just one direction from the LED signals to the dash indicator light regardless of which direction you are signalling.

Ships same business day
$12.95
Universal fit. May require additional adjustment or modification.

These turn signal relocation brackets from ProMoto Billet provide an easy way to move the stock turn signal lights, useful if you find them getting in the way of your luggage configuration.

These brackets may utilize an existing hole in some of the rack side brackets, though many applications will require drilling or fabricating in order to mount properly.

Ships same business day
$17.99
Universal fit. May require additional adjustment or modification.

Installing new turn signals or brake lights and need to find the 'HOT' wire, or are you just trying to find out if a specific wire has power going to it? Either way, this test light can help you locate shorts, open, and voltage on 12-24 volt DC circuits.

Ships same business day
$12.95