High Quality chain. You'll need to cut to fit your sprocket combination.
Non o-ring. Clip type master link.
Our offices will be closed on Monday, September 1 for the Labor Day holiday. We will be back on Tuesday, September 2 to process your orders and respond to your inquiries.
In 2008 Yamaha discontinued the XT225 & re-introduced the XT250. Powering the XT250 is a 249cc, air cooled, SOHC, single cylinder engine. Helping drive the XT250 is a five speed transmission & wet multi-disk clutch. In 2013 the US version XT250 gained fuel injection.
Click here for additional details on recommended parts, accessories, and modifications.
Chain Size: | Front Sprocket: | Rear Sprocket: | Front Tire: | Rear Tire: | Spark Plug: |
428 x 128 | 15T | 48T | 2.75-21 | 120/80-18 | DR7EA |
High Quality chain. You'll need to cut to fit your sprocket combination.
Non o-ring. Clip type master link.
Always carry a spare master link when out on the trail.
Master links are not interchangeable. Be sure to check the manufacturer and series on your chain.
These do not fit the TW200 or XT250. Only for 520 or 525 chains, Please verify chain size.
Clip style master link for the EK 428 O-Ring chain. Keep one in your tool kit for trail side repairs.
Changing sprockets for gearing can wear out the lock washer after a few uses. This is an OEM replacement.
FRITZCO front sprockets are a straight up no hassle installation. Their sprockets are machined from alloy steel that in every way is comparable to OEM Yamaha and the best offered by other manufactures. The sprockets are then given a heat treatment that provides a compatible sprocket for the Yamaha output shaft and longest chain wear life possible.
High quality steel sprockets.
Stock Gearing: 15/48-128x128
Color may vary based on manufacturer availability, quality will not be compromised.
Yamaha XT250 heavy duty chain guard.
Made from 3/16" laser cut steel protects stock to oversized rear sprockets.
This unique design bolts in the OEM location but rests against the rear axle bearing spacer for massive impact resistance.
Chain guards may experience wear over time as a result of friction generated by the chain. Refresh it with this genuine Yamaha part.
Chain guides are subject to wear over time due to friction produced by chain movement. To restore optimal performance, replace them with this authentic Yamaha component.
Chain sliders may undergo degradation over time due to the friction produced by the chain's movement. Restore optimal performance by utilizing this authentic Yamaha component.
Counter shaft seals can wear out over time. Replace it with a genuine Yamaha counter shaft oil seal.
Designed for quick and accurate alignment, this tool clamps squarely to the rear sprocket so the alignment rod can indicate sprocket alignment with the chain.
Here is a tool to help you remove a few links from a chain that is too long. A great tool to have in your tool box.
The head of the pivot pin you are going to remove must be ground down level with the side plate before using this tool to push it out. Failure to do that will cause damage to the tool that is not covered by any warranty!
Can break or rivet chains from #35 to #530 like a pro.
kit includes a 2mm, 3mm, and a 4mm pin to fit most chains.
kit includes press plates,and all necessary riveting pieces and comes in a durable plastic case.
NOTE: when breaking a chain, YOU MUST grind the heads off of both pins on a link first.
This is without doubt the fastest, most effective, most meticulous, precise and systematic method for giving your chain a thorough cleaning. It forces its bristles between the plates where dried and hardened chain lube, road sand, glass, tar and other materials gather to form a hard shield of abrasive dirt where the O-ring meets the chain plates.
Note: Designed to be used with the engine off
Innovative design that cleans chain from 3 angles at once. Long handle keeps fingers and hands away from chain and sprockets.
Introducing Oinker®, the revolutionary chain lube attachment for dirt bikes, street bikes, and ATVs. Say goodbye to messy lubrication. Oinker® attaches to any chain lube or wax, ensuring a precise and even application to both sides of your chain. This means minimal overspray, keeping your swing arm, rear tire, and brakes clean.
*For cans with an attached smart straw, you will need to replace it with the included nozzle
What's Included:
Make your life a little easier by having a set of these in your toolbox. Designed to simplify installation and removal of clip-type master links. One tip is shorter and notched to be placed on the pin which allows the longer end to push the clip.
This Motion Pro press tool is a must have when installing and removing Clip-Style master links (520, 525 & 530 sizes).
Easily presses on and off master link plates, works on 520, 525 & 530 Clip-Style master links.
Maximum master link width 24.8mm.
Will not damage master links, hardened steel pins for reliable use.
Light weight billet aluminum construction.
A high quality master link press tool from Wirth Machine used for the removal and installation of master links using a press fit link plate.
Fits 520, 525, and 530 pitch chain.
ULTIMATE SPROCKET WRENCH KIT