DRZ400S: Chemicals

Time to freshen up your forks? Three pack or single 16oz bottles of Maxima fork oil that will refill your tubes after any fork job. This is a high-quality fork oil and what we use on our projects here at ProCycle.

For most situations you will use 10w Fork Oil. Some custom applications will use the 5w or 15w oil. Order the 5w oil if you have Ricor Intiminators or Cogent DDCs.

A 1 Liter bottle of light viscosity 3w 75-390 light shock oil.

A six step maintenance system designed to recharge any K&N air filter.

• Completely restores airflow efficiency
• Kit includes filter oil, and filter cleaner
• For K&N filters only

This advanced filter oil & cleaner kit by No Toil is alcohol free, completely biodegradable and compatible with all foam filters.

• Offers superior protection
• Waterproof yet easy to clean

• High-performance cleaner and degreaser specifically formulated to remove oil, lubricants, grease, grime and other deposits
• Formulated to clean K&N Filtercharger air filter elements
• Dissolves dirt buildup and old filter oil; washes away with water
• Biodegradable; safe on paint, plastic, cast aluminum and rubber
• 355 ML / 12 U.S. FL OZ. Spray Bottle, Instructions included
• Made in the U.S.A.
• Do not use on polished or anodized aluminum.

Muc-Off Air Filter Cleaner is a state of the art, professional strength bio-degradeable cleaner that's designed to clean and care for foam filters. Its unique combination of active ingredients is formulated to rip through dirt and oil in seconds, without damaging the foam or glue.

• Specifically designed to be ultra- safe on surfaces
• Helps to extend life of foam and glues
• Suitable for all bikes foam air filters

• Formulated to work in combination with the cotton fabric in K&N Air Filter elements to provide a superior air filtration system
• Quickly penetrates the filter pleats; remains suspended in the filter pleats
• 8 U.S. FL OZ. / 237 ML
• Made in the U.S.A.

Dust/waterproof synthetic/petroleum blend for foam-type air filter elements. Super-tacky polymer and co-polymer additives hold onto virtually all fine particles.

• 4-12% increased airflow over competitive products
• Will not plug or migrate off of filters
• Resists washout from carburetor fogging
• Dyed dark blue to ensure even coverage
• Made in the U.S.A.

Limited to ground domestic shipping only.

No Toil rim grease is a high viscosity, non petroleum based compound specially engineered to provide the ultimate filter rim to air box seal.

• Biodegradable
• Non toxic, Waterproof
• Easy cleaning in seconds with water and No Toil cleaner

A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing due to weathering or chemicals. Anti-Seize assures easier disassembly. Temperature range: -60°F to 1600°F (-50°C to 870°C). Salt, corrosion and moisture resistant – ideal for marine use. Meets Mil Spec #907E.

These brake fluids are motorcycle approved DOT 4 brake fluid, and is specially formulated to exceed all DOT 3 & DOT 4 specifications. What this means to you is exceptional resistance to vapor lock and maintaining consistent lever feel during extreme brake use.

Goes on wet but solvent evaporates to leave a dry moly film. This unique dry film won't attract dirt or dust, is highly resistant to water, prevents rust and corrosion. It is the perfect lubricant to use on brake and clutch cables. Includes applicator needle to get into cables, locks and anything else that needs dry lubrication.

The easy way to lubricate the cables on your motorcycle. Lubricates completely in five seconds!

Features:

• Prevents throttle freeze or hang up
• Specially formulated to stay fluid to -70°F
• Ideal for lubricating cables on motorcycles, PWCs, snowmobiles and other vehicles
• Lubricates and rustproofs all moving parts
• Available in 6.25-ounce aerosol can

• Designed to resist fling-off (even in high speed applications)
• Protective coating dries white to ensure complete coverage
• Will not attract dirt, sand, or grit
• Wear and corrosion protection for long chain and sprocket life
• For chain applications, including ‘O’, ‘X’, and ‘Z’ ring units and roller chains
• 5.9 oz (175ml) Aerosol

Renthal chain lube is 100% lubricant, zero propellant. So this new 250ml bottle size combines high performance and value.
The all-new formula Chain Lube is specially designed to penetrate all parts of the chain. This all-condition lube is compatible with all o-ring and non o-ring chains.

This is a vacuum operated automatic chain oiling system to keep your driveline adequately lubricated at all times.

When properly adjusted the oil will last thousands of miles between refills. The Scottoiler kit includes one 250ml bottler of oil which is good for 10000 miles of riding.

This chain lube comes in a squeeze-tube bottle with an integrated brush nozzle. It makes applying chain lube easy and less messy than spray on lubes.

• Revolutionary Parafilm™ formula; spray it on and let it dry
• Doesn't fling off
• Sprays on wet, dries to waxy film and seals the lubricant to your chain
• Non-gooey finish keeps dirt, sand and grit from sticking to freshly lubed chains
• Translates into longer chain life and reduced sprocket wear
• 5.5 oz net wt Aerosol

• Spray on chain and let dry
• Provides a coated layer of oil & waxy film that prevents dirt and debris from sticking to the chain
• Safe to use on all X, Z and O-ring chains
• Protective layer of lubricative film extends the life of your chain and sprockets
• Can be used on Off-road and Street applications
• 10 oz net wt Aerosol

• Engineered to keep your chain clean and lubricated under the harshest conditions
• The triple action formula cleans, lubricates and protects your chain - no matter if it's a standard or O-ring chain
• Engineered to adhere to your chain, on or off-road, and lasts long during those epic adventures
• The biodegradable solvent carrier helps clean chain and aids delivery of oil to micro-pores in chain
• Biodegradable oil penetrates and adheres to metal for an efficient, long-lasting lubricant
• Biodegradable wax seals in oil and keeps dirt off of your chain
• Biodegradable and non-toxic
• Available in 12-ounce (EU: 354,88 ml) aerosol cans

Evans Waterless Coolant (EWC) can be used for all water cooled motorcycles to eliminate overheating. With a boiling point in excess of 375° F, it will not vaporize, thus eliminating overheating, boil-over and after-boil. At the other end of the spectrum, EWC freezes below -40° F.

EWC also delivers more power by eliminating pre-ignition and detonation caused by overheating, thus improving combustion efficiency. It also generates very low vapor pressures which reduces strain on cooling system components. EWC comes in 1/2 gal. containers.

  Installation requires specific procedures. Please refer to the instructions.

Don’t Ride without the Slide

BugSlide is a complete waterless detailer that cleans, shines and degreases while removing bugs and other surface contaminants with ease. BugSlide leaves a protective, microscopic finish that continuously repels dust, dirt, water and fingerprints. Never wax again! The release agent in BugSlide makes clean up quick and easy. BugSlide contains a UV filter for added protection and dries crystal clear with no yellowing, no build-up and no powdery residue.

Safe to use on all types of vehicles.

• Safe to use multiple surfaces including Lexan, glass, fiberglass, plexiglass, chrome, stainless steel, aluminum, leather, vinyl and any non-porous surfaces.
• Free of wax, petroleum, silicone, Teflon or harsh chemicals.
• Leaves a protective, microscopic finish that continually repels dust, dirt, water and fingerprints.
• Contains a UV filter for added protection, dries crystal clear with no yellowing, no buildup or powdery residue.
• Proudly made in USA.

Moto Wash is a powerful cleaner and de-greaser made by Motul.

Safe on all paints, metallic components and plastics.

Leaves a corrosion resistant film.

Gives a glossy look to paints and protects against corrosion.

Dielectric Grease is an insulating silicone grease designed to insulate and protect electrical connections. Pack it into the back side of electrical connectors to protect them from moisture and corrosion. Do not put it directly on the connection surfaces.

• Protects electrical connections and wiring from salt, dirt and corrosion.
• Prevents voltage leaks around any electrical connection.
• Extends the life of bulb sockets.
• Suggested Applications: Marine and automotive electrical connections, spark plug boots, trailer hitches, battery terminals.

This is a weatherproof protectant for wiring and electrical connections. Goes on as a liquid and dries to a vinyl polymer that resists dirt, dust, chemicals and moisture, ensuring that connections stay intact. Brush-top applicator allows coverage without gaps and enables access to tight spaces that roll tape and shrink tubing can't get to.

Stabilizes gas for short and long term periods of inactivity (up to two years) while preventing the formation of varnish. Eliminates carbon buildup in fuel delivery system and exhaust components. Increases octane and removes water from the fuel, making it the perfect solution to prevent and eliminate ethanol (E-10) fuel problems. 8 oz bottle treats 48 gallons of fuel.

• Cures and prevents ethanol fuel problems
• Helps prevent phase separation
• Makes engines start easily, run smooth

Permatex Gasket Remover will help you remove that stubborn gasket without having to scrape so much, possibly damaging surfaces. Prepares surfaces for new gaskets. Give it plenty of time to soak in.

We like red high temperature silicone for use as an adhesive. 

It is much stronger and sticks better than the standard stuff.  It is sensor-safe, low odor, non-corrosive, non-flammable, and non-toxic. 

The resistance to temperatures up to 650°F is a bonus. Comes in a 3 oz tube.
 

Hydraulic Clutch Bleeder Kit includes 2oz of Magura Blood clutch fluid, 2 bleeder tools and fittings to properly bleed your hydraulic clutch. Great if you have air infiltration in the system or damaged it in some fashion.

Filling and bleeding a Magura hydraulic clutch does not need to be a routine chore and should only need to be done when air infiltration within the system is suspected. Magura uses mineral oil, which does not absorb moisture from the environment, to lubricate the whole system.

Note: Magura hydraulic systems use ONLY mineral oil. Do not introduce DOT brake fluid of any kind into a hydraulic system designed to use mineral oil as this will cause corrosion to the internal seals and system failure may result. The only time anyone should ever need to replace the hydraulic fluid in a Magura system is following a hydraulic line exchange, a system upgrade, a crash which has damaged the system components or in a situation where a lack of fluid within the system has been diagnosed by poor lever feel.

If you do need to bleed your Magura hydraulic system, their custom made kit does indeed make that chore easier.

Removes splattered insects and organic residues (bird droppings) from wind screens, fairings, paint, metal, mirrors and motorcycle plastics. Like all the other Motul products that we like so much, Insect Remover is amazing. Spray it on and let it sit for a few minutes. It softens and dissolves bug remains much better than other cleaning products.

The best product for those surfaces that mate together without a gasket. Like center cases, cam covers and the like.

• Heat-resistant
• Tough, durable sealer utilizing silicone rubber as a primary component
• Ideal for applications where a long-lasting, faultless seal is absolutely critical
• 3.5 oz. tube

Latex free gloves for the shop or garage.

• 10 Pack

• Waterproof and washout-resistant.
• Fights against dirt and moisture ingress.
• Excellent performance in cold conditions.
• Use in forks, shocks, and other hydraulic systems.
• Promotes smooth, buttery action.
• Extends time between service intervals.
• Unique Flo-Yellow color for ease of identification.

RT Ultra Slick Grease provides maximum lubrication and minimum friction for seals and bushings. Great for engine seals too.

• Special compound for minimum friction and maximum lubrication
• Perfect for fork seals, bushings and O-rings
• Available in 1-fluid ounce jar

• Synthetic spray wax technology
• Outstanding gloss, clarity, depth, and slickness
• Use on any hard surface including plastics, rubber, glass, chrome, paint, and fiberglass
• Fills minor scratches and cob-webbing

ThreeBond 1342 low strength thread locking compound. This is the ideal retaining compound for small nuts and bolts. Fasteners are held securely but, can be easily removed when necessary. ThreeBond gives this a number 4 rating for exposure to engine oil making it a good choice for internal fasteners as well as external fasteners. 10ml bottle.

Slime Tube Sealant is formulated and tested for use in all tube tires. Once installed, Slime remains liquid and will not harden or dry out. Slime is guaranteed for 2 years.

As the Slime treated tube rotates, centrifugal force pushes the sealant to the tread area creating a layer of protection, repairing punctures as they occur and treating existing punctures. Slime is not intended for use in tubes losing pressure from sidewall punctures, bead leaks, damaged rims or faulty valves. Slime for tube type tires is not recommended for use in tubeless tires.

• Prevents and repairs punctures up to 1/8"
• Remains liquid inside the tire, coating the tread area as the tire rotates
• Non-toxic, non-hazardous, non-flammable, non-aerosol and water soluble
• Tubes treated with Slime can be patched with a conventional vulcanized patch using a bit of patience and care

Bel-Ray Waterproof Grease is the legendary high-performance, multi-purpose grease. Superior water resistance, even in salt water, will ensure continued sealing and protection. Perfect for wheel bearings, headsets, shock linkages, swing arm pivots and other motorcycle, ATV, snowmobile and marine chassis lubrication points. Due to its aluminum complex formula, it won't melt or run out. Enhanced mechanical stability and special anti-wear additives protect and lubricate bearings for improved performance. Sold in a 16 oz. tub.

Maxima brand may be substituted due to availability.

• Apply to boat snaps, metal and plastic zippers to protect against corrosion, reduce wear and friction, prevent binding and repel salt spray deposits
• No-staining and non-toxic
• Reduces friction and wear
• Will not wash off
• Protects from -65° to +650°F
• 1.75 oz tube