Same-day shipping cutoff: Noon Pacific Time

Himalayan 411: Gas Tanks

Himalayan 411

 

The Royal Enfield Himalayan is powered by a fuel injected / air cooled 411cc single cylinder four stroke engine mated to a 5 speed wet clutch transmission. The Himalayan weighs in at 439lbs (wet) with 8.6 inches of ground clearance and a seat height of 31.5 inches. Newer models have selectable ABS for better offroad performance.

Chain Size:        Front Sprocket:        Rear Sprocket:         Front Tire:        Rear Tire:        Spark Plug:
525x110 15T 38T 90/90-21 120/90-17 CR8EIX

 

Gas Tanks

Universal fit. May require additional adjustment or modification.

TechSpec’s Motorcycle Tank Grips were developed to improve body, bike control and increase riders comfort. Gripping your motorcycle between your knees or thighs improves overall control of your ride by better securing your body weight and seat position under the forces of braking, cornering and acceleration while also relieving pressure from your wrists, elbows, shoulders and lower back giving you increased control and a more comfortable, safer ride. Snake Skin is a thin, .125” medium durometer “rubber” material that offers a secure, comfortable grip, durable protection and a clean stock look.

This universal precut kit includes left and right tank grips. (8" X 3") Triangle

Ships same business day
$29.95
Universal fit. May require additional adjustment or modification.

Security for your fuel tank. Includes 2 keys. Internally vented with a check valve that prevents spillage in case of a tip over.

  Fits Acerbis, IMS and Safari tanks only.

Ships same business day
$39.95
Universal fit. May require additional adjustment or modification.

If you're like us, you hate the long floppy vent hose hanging off the cap of your aftermarket tank.

This one-way vent cap replaces the long hose with a short one only about 2" long. It allows air into your tank but prevents fuel from sloshing out.

Machined from billet alloy and anodized for good looks.

  Not for stock fuel tanks!

Ships same business day
$11.95
Universal fit. May require additional adjustment or modification.

The small size and right angle hose barbs make this filter easier to fit into the small space between your fuel petcock and carburetor. Filter body is only 7/8" diameter. Straight filter is 2" long, 90 degree filter is only 1-5/8" long.

Choose Type
Ships same business day
$24.95
Universal fit. May require additional adjustment or modification.

This filter is meant for 5/16" fuel lines. Only 1/2" thick it is small enough to fit just about anywhere.

Choose Pack
Ships same business day
$24.95
Universal fit. May require additional adjustment or modification.

Fuel supplies can be sketchy at times. This filter lives in your tank to trap dirt and debris as it is poured into the tank. Features a custom shaped adapter that fits securely under the gas cap, creating a leak-proof seal. If it stays out of your fuel, it can't get into the carburetor! Created by the filter experts at Twin Air, this filter fits IMS,  Acerbis and Safari brand gas tanks.

Choose Tank Type
Ships same business day
$35.95
Universal fit. May require additional adjustment or modification.

All of these lines are stronger and more durable than vinyl fuel lines and are resistant to swelling, UV light, as well as hardening and cracking.

Five-layer Greenshield® Barrier Technology cuts vapor loss and saves fuel, making it safe for the environment and fuel efficient.

1. Barrier tube - provides high heat and corrosive liquid resistance.
2. Greenshield® barrier - patent-pending technology provides the lowest permeation in the industry.
3. Adhesion layer - secondary protective barrier.
4. Reinforcement layer - spiral textile reinforcement provide strength and pressure resistance.
5. Cover - protect underlying components.

  • 30" length, 1/4" ID
  • Temperature Range: -40°C to +125°C (-40°F to +257°F).
  • HNBR tube with thermoplastic barrier and CPE cover; reinforced aramid fiber.
  • Oil, heat, ozone, and abrasion-resistant cover.
  • Multi-fuel compatibility. Unleaded gasoline, methanol, ethanol (E10, E15, E85)
  • PSI rating: 35 to 50.
  • Not for use with fuel-injected models
Select Product
Ships same business day
$9.95
Universal fit. May require additional adjustment or modification.

All of these lines are stronger and more durable than vinyl fuel lines and are resistant to swelling, UV light, as well as hardening and cracking.

Five-layer Greenshield® Barrier Technology cuts vapor loss and saves fuel, making it safe for the environment and fuel efficient.

1. Barrier tube - provides high heat and corrosive liquid resistance.
2. Greenshield® barrier - patent-pending technology provides the lowest permeation in the industry.
3. Adhesion layer - secondary protective barrier.
4. Reinforcement layer - spiral textile reinforcement provide strength and pressure resistance.
5. Cover - protect underlying components.

  • 30" length, 5/16" ID
  • Temperature Range: -40°C to +125°C (-40°F to +257°F).
  • HNBR tube with thermoplastic barrier and CPE cover; reinforced aramid fiber.
  • Oil, heat, ozone, and abrasion-resistant cover.
  • Multi-fuel compatibility. Unleaded gasoline, methanol, ethanol (E10, E15, E85)
  • PSI rating: 35 to 50.
  • Not for use with fuel-injected models
Choose Size & Type
Ships same business day
$9.95
Universal fit. May require additional adjustment or modification.

Ordering new fuel line? How about a set of fresh zinc plated clamps to go with it?

These will be sure your fuel line stays connected. A pack of 8 clamps in 2 sizes to fit most 1/4 or 5/16 fuel hose.

Ships same business day
$5.95
Universal fit. May require additional adjustment or modification.

Hose reducer to go from 5/16" line down to 1/4" line. Many bikes have 5/16" carburetor spigots but most aftermarket petcocks are 1/4". This solve the problem of mismatched sizes. Solid brass construction. Can be used to route or repair fuel lines, oil lines or air lines. Barbed ends provide a secure fit.

Ships same business day
$8.95
Universal fit. May require additional adjustment or modification.

Need to mount two containers? A water and a fuel? Two waters? Already have a RotoPax Mount for a single container? Get this extender to work in conjunction with a pack mount and that will be no problem! Single mount, two containers.

Ships in 3-5 business days
$43.95
Universal fit. May require additional adjustment or modification.

RotoPax holder made to mount a single Fuel and/or Water container.

Need to mount two containers? A water and a fuel? Two waters? Get the extender which allows you to stack two containers no problem! Single mount, two containers

Add Extension Mount
Ships same business day
$52.95
Universal fit. May require additional adjustment or modification.

RotoPax holder made to mount a single Fuel and/or Water container.

This unique design adds strength and provides extra tightening power.

Use with included base plate or remove plate to attach mount direct by bolting up through the bottom or down through the top.

Ships same business day
$62.95
Universal fit. May require additional adjustment or modification.

RotoPax are Rotational Molded - the process which produces indisputably superior products.

  • Thicker walls and stronger construction
  • Bright colors that are less prone to fading
  • Extra threads, thicker walls, and sure-seal gasket guarantee no leaks

Need to mount two containers? A water and a fuel? Two waters? Finally, you can stack multiple packs together! Use in conjunction with a pack mount. You will need to purchase the Single Mount as well as the Extender.

Choose Container
Add Container Mount
Add Extension Mount
Ships same business day
$87.95
Universal fit. May require additional adjustment or modification.

Auxiliary fuel tanks mount to handlebars, forks, or rear racks.

  • Suitable for minis, trials bikes, full size bikes, and anywhere else a little extra fuel is needed.
  • Each tank includes a siphon kit that connects the tank to the main fuel tank and automatically siphons fuel while the bike is being ridden.
  • With this design, the auxiliary tank empties first, before the main tank.
  • Does not interfere with headlight, handguards, rear seat, etc.
Add Fuel Stabilizer
Ships in 3-5 business days
$112.95
Universal fit. May require additional adjustment or modification.

This Super Siphon has  a (1/2 inch x 6 foot) long hose, which makes it quite easy to transfer fuel from one bike to another! Simply, shake the hose to prime it and get fuel moving. The hose is resistant to gasoline and any other hazardous chemicals. Roll it up, stuff it in your bag and you will be very happy whenever you need it.

Ships same business day
$22.95