KLX250S: Controls

Drivetrain: 

* KLX250S The chain length for the stock 14-42 gearing on the ´06 & ´07 models, or the 13-42 gearing on the ´09 to Current models is 106 links.

If you have the KLX250SF SuperMoto version with stock 13-39 gearing it will also take the 106 link chain.

If you run 45 or larger on the rear, you might want to opt for the 108 link chain. All of these chains come with a clip type master link

Front Tire:            Rear Tire:              Spark Plug:
80/100-21 (S) 100/100-18 (S) CR8E
110/70-17 (SF) 130/70-17 (SF) CR8E

 

Controls

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebars, ProTaper with Free ProTaper Grips

Choose Bar
$99.95

While supplies last!  Choose between a ProTaper Adventure 1 1/8" fat bar or a High Bend 7/8" handlebar and receive a free set of medium density ProTaper full waffle grips.

Thumbnail

  Limited to stock on hand.

ProTaper's ADV handlebars give you a bar taller than most with extra space on the control portion of the bar. These bars provide an additional 20mm of space next to where your levers and throttle are located for your GPS, phone cradle, auxiliary switches, etc . Offering in Adventure (which is taller than stock).

These are oversize bars, which means they are are 1 1/8" at the clamp, not the smaller 7/8" diameter. Therefore some bikes will require a adapter and there are several available to select from.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebar, Oversize Kit With Risers

KLX250S '06 - '14
Choose Rise
$117.95

Gun Metal Gray

Upgrade your bike with FLY Aero 1-1/8" bar. Constructed of Aircraft grade 7075 taper walled aluminum that tapers to a standard 7/8" to accept stock controls.

  • Bead blasted surface for added strength
  • Laser accurate steering
  • Dissipates shock and reduces rider fatigue
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebars, Aero Fly Racing

$79.95

Comfortable Oversize (or Fat Bar) Handlebars. For bikes with standard 7/8" handlebars these will require the use of a 7/8 to 1-1/8  adapter. Grey in color. Raise your bars and get rid of the crossbar that obstructs your view of the speedo. Works with stock controls and cables.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebars, Fly Racing

$41.95

These handlebars are high quality at an affordable price. Several bikes here in the shop use these bars and we like them.

  • 7/8" mounting area, fits stock mounts
  • Manufactured from 6061 T-6 aircraft grade aluminum
  • Knurled center section and clutch end
  • Bar pad is included
  • Reduces rider fatigue by absorbing impact, shock and vibration
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebars, SE ATV High ProTaper

$69.95

These 7/8" bars fit in the stock clamps and raise your grips a couple inches. They look great too!

View Special Grip Offer HERE.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Handlebar Riser, 2" Powermadd

Choose Bar Size
$59.95
  • 4.75" wide,
  • Requires 7/8" bar clamps on bike
  • Raises handlebars 2 inches and allows fore/aft position adjustment
  • Provides dual pivot points for optimal bar positioning
  • One piece design is made from solid aluminum for superior strength
  • Available for 7/8" - 7/8" or 7/8" - 1 1/8" bars
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Handlebar Riser, 2" ROX Anti-Vibration

Choose Color
$162.95

These versatile Risers allow you to clamp a 7/8" diameter handlebar or you can remove the 7/8" reducers and then clamp an 1- 1/8" aluminum "fatbar". If you are thinking of going to a fatbar after you bend your stock set or just want the versatility and option to run any bar, this is the riser to go with. Reducers lock into risers to insure no slippage between components. Anti-Vibe Risers may interfere with aftermarket large capacity fuel tanks, and some steering stem clamp configurations (use standard pivoting risers). These risers use 8mm bolts. Always check and confirm that your bike has adequate cable and brake line length before installing any handlebar risers.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Handlebar Riser, Rox Pro-Offset Elite Block

Choose Color
$94.95

This unique design from Rox allows you to move your bars either closer (1" up and back) or further away (1" forward and 1-1/4" up) depending on rider preference. These risers have an oblong mounting hole so that they will fit virtually any triple clamp with 8mm bolts. A set of reducers lock into the risers ensuring no slippage whether you have a 7/8" or 1-1/8" bars

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Steering Damper, W.E.R.

KLX250S '94 - '07
$419.95

Works Enduro Rider steering dampers. We like these better than other brands because they mount above the front fender out of the way. You can also change handlebars and bar clamps without having to re-engineer the damper mounting.

  • Exclusive Off-Road valve body eliminates the need for a second adjustment.
  • No damping back to center so that maneuverability and jumping are unaffected.
  • Teflon impregnated spherical heim joints at each end of actuation arm eliminate friction and binding.
  • Does not interfere with handlebars, controls or time keeping equipment.
  • Infinitely adjustable.
  • Multiple GNCC and Enduro Reliability Championships.
Thumbnail

 Please allow 10 days for delivery.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA ProCycle Approved

Grips, Heated A'ME Chicane

$129.95

This grip  features BluPulse™ ‘Adaptive Thermal Regulation’ technology, which combines thermal sensors in each grip with intelligent micro electronics in the external controller, and allows a rider to select between six temperature settings with a simple push of a button. A blue LED indicates both the selected temperature setting and heating status while the micro processor varies the amount of heat generated to maintain the selected temperature.

A key component with A’ME’s new Heated and Non-Heated Sport Bike Grips are five interchangeable throttle cable Cams that work in conjunction with the right hand throttle sleeve which will allow the grip to fit most bikes.

A’ME Chicane Sports Bike grips are composed of Vulcathane,™ a specially Blended rubber compound combined with UV stabilizing ingredients that exhibit superior oxidation and ozone resistance. As a result, A’ME M/C grips will not absorb moisture, deteriorate, harden or become slick with age, all the while providing and maintaining comfort.

NOTE: The A'ME thru-hole design also allows you to mount your stock or aftermarket bar ends.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Grips, Heated A'ME Full Waffle

$149.95

Features:

  • BluPulse™ Technology combines intelligent micro electronics with thermal sensors in each grip allowing the rider to select between six temperature settings
  • Ergonomic Design, reduces wrist and hand stress
  • Universal Throttle System designed to fit the vast majority of Sport and Dual Sport bikes
  • Intelligent power shut off system, prevents accidental battery power loss
  • Made of a specially formulated Valcathane™ material that produces a soft but durable surface
  • Glue-less design features molded grip on throttle slide and left hand Clamp-on grip
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Grips, Heated BikeMaster

Choose Controller
$59.95

Highly efficient design delivers warmth faster than traditional heated grips.

Choose from the standard five level push button temperature controller, or the LCD display controller which shows the selected heat level and available battery voltage.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Grips, Heated Koso Apollo

$129.95

The Apollo Heated Grips are designed with an integrated adjustable thumb switch, which allows them to easily fit on any kind of motorcycles on the market. The integrated thumb switch gives control to the rider to adjust the temperature level while keeping hands on the bar for a safer ride.

Its wide temperature setting range will keep the rider comfortable under the cold riding conditions.

The 5 color LED display will enhance the visual look of the heated grips and will allow the rider to quickly know at which heat level the grips are set.

This system will also detect if the battery voltage is too low and will automatically shut down the heated grips in order to make sure the rider have enough power to start the engine or use the motorcycle.

Specifications:

  • Integrated thumb switch designed for easy installation and control.
  • “Plug & Play” wiring connections to shorten the installation time.
  • Wide temperature settings for various weather conditions.
  • Low Battery Warning protection to ensure the motorcycle has enough power to start.
  • 5 color LED Indicators for the rider to quickly know in which heat level the grips are set.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Grips, ProGrip 714 Rally

Add Grip Glue
$10.95

 These grips feature a thicker design that dampens vibration. The soft shoulder allows ease of movement. Three wire-tie grooves are molded into the grip to make securing them a breeze. We think they are great!

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Grips, ProTaper Pillow Top

Add Grip Glue
$12.95

Reduces vibration and cushions impact. Inner core compound perfects the bonding interface with bars. Anti-Rip Tip™ uses denser compound to increase life of grip. Designed to self-clean and shed mud away from outer surface. Tacky gel-like surface compound is perfect for offroad and MX.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Grips, Renthal Single-Compound

Add Grip Glue
$13.95

Each pattern is available in three advanced synthetic rubber compounds. This means you can have the optimum combination of strength, tackiness and shock absorption to suit every riding condition and individual style. Soft grip is extremely soft, giving you a very comfortable ride, great feel and reduces the chance of blisters; however, because the grip is so soft, it wears quickly. Medium is a compromise between firm and soft. Firm grip has the same feel as a stock grip, it is very strong and has very good resistance to tearing and abrasion. Half Waffle has waffle pattern in finger area for traction and diamond pattern on palm side to reduce blisters. Full Waffle: designed after the CR Honda® grip.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Grips, Vans Cult - ODI

Add Grip Glue
$19.95
  • Feature the classic Vans waffle sole pattern with a subtle domed center section for improved ergonomics and vibration dampening
  • 125mm in length
  • Fit 7/8" bars
  • Sold in pairs
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Cruise Assist, "Crampbuster"

$10.95

This little jewel reduces hand fatigue and cramping on long rides or daily commutes. The Crampbuster is not a throttle locking unit but, rather a simple clip-on device which allows you to relax your grip while riding.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Cruise Control, Go Cruise

$19.95

The Go Cruise cruise control mounts over the throttle grip and rests on the brake lever to hold your throttle open, allowing you to stretch and rest your hand on long rides. Installs and removes in seconds with no tools. You can roll off the throttle manually to disengage the Go Cruise.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. ProCycle Approved

Lever, Parking Brake BrakeFix

$19.95

Attach this over your brake lever and hand grip, squeeze the brake lever, pull the locking bar in and lock the black portion down. This creates a locked front brake, making parking safe and secure with about 5 seconds of effort.

To unlock the BrakeFix, you just lift the back of the black hooking portion to release it. This takes about 2 seconds. Perfect for use with Snapjack type stands or just parking on an incline.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Clutch Cable

KLX250S '06 - '14
Add Cable Lubricant
$14.95

A high quality replacement clutch cable.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Mirror Mount Adapter

$18.95

Replaces all 2 bolt style clutch/brake lever mount clamps on your clutch or brake lever holder. Can help save space on short bend handlebars.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Mirror Mount, Split

$8.95

With the split back, you don't need to remove your grip or throttle tube, just put it on and tighten 'er down. Put the mirror in and hit the road. Clean and simple.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Mirror with Mount, KTM Style Folding

$29.95

This new mirror can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price. Fits either left or right side and includes handlebar mount.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Mirror, Doubletake

Choose Style
$47.95

Made from a nylon and fiberglass composite, these mirrors are extremely durable. They easily fold out of the way when you head off-road.

Enduro Mirror 4"

Ideal for dualsport use, where you want a low profile when folded down. SAE spec convex glass gives a much greater field of view than flat glass.

ADV Mirror 3" x 5"

Adventure mirrors are designed for adventure riding where you want your mirror extended most of the time.

Mirrors mount to any 10mm perch. Mirror and arm included as shown in pictures.

Thumbnail

Sold individually.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Mirror, Folding Dualsport

$22.95

This new mirror screws into your stock mirror mount but can be folded out of the way when it's time to hit the trails. These are quite similar to the very popular KTM folding mirrors but at half the price. Fits either left or right side.

Sold individually. If a set is needed, order two.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Mirror, PSR Dualsport

Choose Mirror Shape
$47.95

PSR dual sport mirrors come with a slightly convex mirror for a wider field of vision behind you. The round mirror is 4.25" in diameter while the oval is 3.75" x 3". These mirrors are easily adjustable and fold out of the way quickly with the 1" RAM mounts.

The RAM Ball Stud Base used for both mirrors will go into any standard 10x1.25 threaded mirror base.

Thumbnail

Sold individually. If you need a set, please order 2.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Made in USA

Mirror, Trail Doubletake

$24.95

Just two inches in diameter, this is the smallest mirror available. Perfect for bikes meeting legal requirements for street legal rules. Simply zip-tie the mirror to your handlebars out of the way of brush and protected from crashes.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Mirrors, Bar-End Mount

$49.95

Bar end mounted mirrors move the mirrors out past your elbows so you can actually see what is behind you. They can mount with or without hand guards.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Cable Luber, Motion Pro

Add Cable Lubricant
$9.95

Keep your cables lubed up and working freely, with Motion Pro's Cable Luber. This tool is used to inject lubricant into any cable housing. Clamps over housing and cable allowing an aerosol can with nozzle to be connected. Once the lubrication solution runs out the far end, the cable is lubricated.

WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Cable Luber, V3 Motion Pro

Add Cable Lubricant
$19.95

Designed to seal completely around the cable housing and stop all those messy leaks. With the unit closed and sealed around the cable, your cable gets better lubrication and you waste less lubricant.

  • Works on most cables with a 4mm - 8mm O.D. housing.