Luggage

The little tool bag that Yamaha provides behind the side cover is nice, but adding this Tool Tube to your TW will make it easier to carry some real tools! The ABS pipe is plugged on each end with waterproof expanding plugs. It is held to the frame of your TW with powder-coated steel straps and brackets. It provides a storage space of 3" ID x 10-1/2" long. Includes all hardware required to mount to your TW200.

You can now order your Tool Tube with a Locking End cap, mini padlock and keys included, on the exposed end.

If you already have a Tool Tube you can order just the Locking End Cap and lock.

Giant Loop is aiming for smaller, lighter security in the form of its new compact Quick Loop Cables, available in 36- and 84-inch lengths. These cables roll up into a compact coil with an included hook-and-loop strap for easy storage. Both of these cables weigh under 6 ounces. A bright orange vinyl cable sheath not only protects the bike's finish from scratches, but it also provides high-visibility that, according to Giant Loop, is for "discouraging the opportunistic grab-and-dash thief to move on to an easier target."

The 84-inch cable integrates with Giant Loop's Great Basin Saddlebag and Siskiyou Panniers and other large bags which feature cable pass-throughs so riders can secure their luggage to a parked motorcycle. The 36-inch cable is more suited to locking a helmet or riding jacket to motorcycles. These cables do not include a lock.

The perfect document holder where you can keep your registration and insurance papers tucked up and out of the way in a water-resistant container. Just zip-tie it to you bike wherever you like and off you go. The Moto Caddy is really two containers in one - the longer side is 4 inches long, good for your paperwork, while the other end has a 1 inch depth, perfect for some emergency coins!

The HelmetLok cable is coated, to protect your helmet and bike. Small and compact enough to fit in your pocket, jacket or on your belt loop. HelmetLok is designed to lock your helmet to any bike using the handlebar or frame as an anchor point. A 'T' Extension is included if you need additional space between the lock and your helmet, and for helmets with quick release buckles.

Don't be weighed down carrying your helmet around anymore. Just use the simple to operate, carabiner-style HelmetLok and you can secure your helmet using the convenient outward opening mechanism. The combination can be reset to the number of your choice. Enjoy security and freedom with a HelmetLok.

The Stash Box is a weather resistant storage box that mounts between the motorcycle and the license plate. It is ideally suited to storing the vehicle registration and other small objects while remaining unobtrusive. The Stash Box has features that provide benefits over other motorcycle storage devices i.e., low cost, concealed mounting location, lockable, vehicle styling is unaffected, and easy accessibility.

• Sized to work with all standard size license plates as well as the current Wisconsin and Ohio plates
• External Dimensions: 7" x 4" x 1" plus 1" on the width for the lock
• Made from molded polypropylene
• Includes all mounting hardware, retention pouch for paper documents, foam insert, lock and two keys

Our Tool Tube mounts in place of the little stock tool carrier. The tube is made from 3 1/2" O.D. ABS pipe. It's held by 2 strong powdercoated steel straps. Both ends are sealed with waterproof expanding plugs. This is the ideal way to carry those items you always want to have with you on every ride. Tube is approx 13" long. Long enough to carry your Tire Iron Wrenches.

You can now order your Tool Tube with a Locking End cap, mini padlock and keys included, on the exposed end.

If you already have a Tool Tube you can order just the Locking End Cap and lock.

Locking End cap for the ProCycle Tool Tube. Mini padlock and keys included.

The GearLok Lock with Cable utilises a 150cm long braided galvanized steel plastic coated cable to lock your helmet, jacket, backpack or any other accessory to your bike.

Simply pass the loop end of the cable through a convenient part of your bike like the frame, handlebar or grab rail. Thread the other end through the loop and then through the object/s you want to secure. Next, insert the end of the cable into the lock slot and slide the lock up or down the cable to adjust the length.

Press the Snap Button till you hear a "Click" and scramble the four (4) digit security dial…done! Your items are now secured to your bike.

Fits perfectly under the stock seat. Made from 1000-denier Cordura. Cordura is water-resistant and dries quickly. Mounts to seat frame with 4 hook & loop velcro straps. Includes a shoulder strap for easy carrying.

Our Tool Tube mounts in place of the little stock tool carrier. The tube is made from 3 1/2" O.D. ABS pipe. It's held by 3 strong powder coated steel straps. Both ends are sealed with waterproof expanding plugs. This is the ideal way to carry those items you always want to have with you on every ride. Tube is approximately 13" long.

You can now order your Tool Tube with a Locking End cap, mini padlock and keys included, on the exposed end.

If you already have a Tool Tube you can order just the Locking End Cap and lock.

Does not fit if your bike is equipped with the new emissions system. The charcoal canister prevents the tool tube from being mounted properly.

The GCAG Bottle Holster is designed to support many different bottles. The Bottle Holster can attach to their Uprising Soft Rack, Hardcore Soft Rack, or anything you can get the straps around. This is an easy and convenient method to carry extra liquids.

The Following bottles have been tested and verified:

• 1 Liter fuel bottles such as Primus, MSR, and Optimus
• 1.5 Liter fuel bottles from Primus
• 1 liter Nalgene bottles
• 40oz Thermoflask water bottle

Any bottle with a circumference of 11.5" or less will fit.

Features:

• Four straps that can easily go around any mount point.
• Top strap to run through any slotted cap to prevent the bottle from coming out.
• Pull string with keeper in the top to keep shorter bottles and bottles without a slotted cap from coming out.
• Made from 1000D Cordura. 

Need some extra protection from Mother Nature? We’ve got you covered with a full rain cover designed to slip over your 38l Adventure Saddlebags.

Features

• Heavy duty PU coated 400d nylon construction 
• Drawstring retention cord cinches securely over your 38l saddlebags
• Quick and easy On/Off versatility

* OBR ADV Gear 38l Adventure Saddlebags sold separately.

Fuel range and water storage is a concern of every adventurer. Easily carry 1l to 1.5l fuel or water bottles with the OBR ADV Gear Bottle Wrap. The OBR ADV Gear Bottle Wrap is a versatile solution to carry varying sizes of fuel/water bottles anywhere on your luggage kit. The OBR ADV Gear Bottle Wrap is a basic wrap panel with a series of web loops that allows secure fuel/water bottle attachment via your existing luggage straps.

Features

• Heavy duty industrial material construction with high strength UV resistant nylon webbing
• External reflective webbing 
• Adjustable side buckles to perfectly adjust to varying bottle diameters
• SRB Buckle strap secures bottles by looping through bottle caps and under bottle base
• Fits bottle diameters ranging from 2.5” to 4”

* Fuel bottle not included

Add a ProCycle Thermal Tumbler for a great value here.

Fuel range and water storage is a concern of every adventurer. Easily carry 2l fuel or water bottles measuring 6”x8.5”x3.5” with the OBR ADV Gear Bottle Holster. The OBR ADV Gear Bottle Holster is a versatile solution to carrying 2l fuel/water bottles anywhere on your luggage kit utilizing existing luggage straps via a series of web loops.

Features

• Heavy duty industrial material construction with high strength UV resistant nylon webbing
• Velcro Back Plate allows for hard mounting using self-sourced appropriate hardware
• SRB buckle strap secures bottles by creating a closed loop over bottle 
• Fits bottles measuring 6”x8.5”x3.5”

* Fuel bottle not included

Our Tool Tube mounts in place of the little stock tool carrier. The tube is made from 3 1/2" O.D. ABS pipe. It's held by 3 strong powder coated steel straps. Both ends are sealed with waterproof expanding plugs. This is the ideal way to carry those items you always want to have with you on every ride. Tube is approximately 13" long.

You can now order your Tool Tube with a Locking End cap, mini padlock and keys included, on the exposed end.

If you already have a Tool Tube you can order just the Locking End Cap and lock.

This Waterproof First Aid Kit is the perfect size for your "Don't leave home without it" list.

Always keep your first aid kit handy and right where you left it. The Waterproof First Aid Kit easily mounts almost anywhere you need it with self-adhesive hook-and-loop mounts. Contents stored in a heavy-duty nylon bag, with waterproof zipper and special coating to ensure your supplies stay dry.

100% Waterproof! Saddlebag Dry Pods update Giant Loop’s Great Basin Saddlebag and Coyote Saddlebag, replacing the Great Basin Dry Pods and Coyote Dry Pods.

Keep gear organized and dry with this set of 3 roll-top inner liner Saddlebag Dry Pods, featuring RF welded seams and air purge valves that make it easy to compress gear by squeezing air out of the sealed Dry Pods. Specifically designed to fit inside every version of both the Great Basin Saddlebag and Coyote Saddlebag – as well as the new Great Basin Saddlebag Roll Top and Coyote Saddlebag Roll Top – Giant Loop’s Saddlebag Dry Pods also can be used anywhere you need high-quality, lightweight dry storage.

Includes two side Pods and one double-ended center Pod. Backed by a Limited Lifetime Warranty against defects.

• Top-quality, abrasion-resistant UltraMax™ polyester
• Hi-visibility interior to help locate small parts, such as nuts and washers
• Heavy-duty, self-fastening strap for secure closure
• Small zippered pocket to hold smaller tools, bolts or screws
• Pockets range in various sizes to fit wide range of tools
• Elastic loops to hold CO2 cartridges
• Measures 13.75" x 10.5"

Flats never occur next to a green grassy field with daisy’s … it always happens way out in the bush and in the dirt and weeds. Change your flat on a clean surface protecting your hubs and bearings from picking up unnecessary dirt and debris with the OBR ADV Gear Flat Mat. Our 24” x 24” Flat Mat provides you a clean area to set your wheel onto while also having convenient slip pockets to stash those easy to loose bits and parts that you removed during the flat repair.

Features

• Heavy duty industrial material construction
• Slip pockets to keep those loose parts and tools close by
• Reinforced center panel to set your hub onto
• Folds flat for easy storage within your luggage

It seems that while packing for every adventure … we always end up with a few items that were either neglected to be packed, were last minute gear additions, or just needed to be packed in a readily accessible location…. The OBR Adv Gear Tool Pouch is the perfect solution for these miscellaneous items. Once packed the tool pouch can be slipped into any bag or attached externally using integrated webbing loops that are built into the pouch.

Features

• Heavy duty industrial material construction with high strength UV resistant nylon webbing
• Heavy duty #10 coil zipper that won’t jam up in the dust
• External reflective webbing with Molle loops
• Pouch dimensions 5” x 13”

* Tools not included

In order to be prepared for all possible mechanical mishaps along the trail or on any adventure, we are required to carry a certain selection of tools. The OBR ADV Gear Tool Roll will help keep those tools together and stored in an organized fashion easy to be found should one of those mechanical mishaps occur.

Features

• Heavy duty ballistic nylon construction
• Heavy duty #8 coil zipper
• Individual Tool Slots for Tire Irons, Wrenches, Screw Drivers … along with a zippered pouch providing secure storage for those smaller items
• Detachable 10”x10” slip pocket cover flap that also doubles as a hub pad keeping your hub out of the dirt when changing a flat
• Open dimensions 11” x 17”

The Chilly Exhaust Heat Shield is the most effective heat shield on the market. The innovative three piece design consists of a top shield attached to 2 rails with rivets and spacers. This reduces the contact area and slows down heat transfer. They have incorporated a patented, insulated reflective blanket on the underside of the shield to reduce radiant heat transfer. The included stainless steel clamp makes it simple to install.

We highly recommend a heat shield if you run soft luggage without hard racks.

FEATURES:

• Solid Top Shield - The logo is laser etched and there are no cutouts on the top shield. This prevents radiant heat from passing straight through to your luggage.
• Side Rails - By isolating these with spacers the heat conductive surface area to the top shield is reduced and slows down heat transfer.
• Radiant Heat Shielding - The reflective insulated blanket on the bottom of the shield is the real hero. This patented material won't be found anywhere else in the motorcycle industry. 
• Stainless Steel Clamp - Slots have been provided in the side rails to make installing as easy as it gets.
• Brushed Aluminum - Lightweight and looks nice.

DIMENSIONS:

• Length 7.5" (190mm) x Width 3.5" (76mm) x Height 1" (25mm)
• Clamp fits any exhaust 3.5" - 5.5" (89mm - 149mm)

Don't get burned! Giant Loop's ingeniously simple and effective exhaust shield protects bags and bodywork from heat damage. The Hot Springs Heat Shield helps avoid the meltdown, preventing bags and side panels from touching your bike's exhaust. It's the lightweight, universal heat problem-solver for virtually any motorcycle exhaust system. Backed by a Limited Lifetime Warranty.

The perfect dry backpack from Moose. Constructed of heavy-duty waterproof tarpaulin with heat-welded seams. Heavy-duty quick-release buckles and  water resistant zippered external pocket make for a versatile bag.

The roll-down top creates a truly waterproof seal for the main compartment. Adjustable shoulder and sternum strap for the ultimate in comfort. 22 liter capacity.

The Dakar pack has been designed for those rides where you find yourself a long way from home. Offering enough storage (22.5L) and versatility for the true adventure rider, the Dakar pack has a number of internal organized pockets for all your gear, whilst still maintaining enough free storage space to maximize flexibility. Durable 1680D waterproof fabric construction ensures the Dakar is up to the task of long endurance rides.

The unique multi-tier external pocket system gives you quick access to any compartment without having to loosen off the entire pack every time. Internal to the pack is a fully padded AV pocket with cable ports for external cable routing, a soft-lined goggle pocket and a vented mesh breathable storage pocket. The Dakar pack would not be complete without the Source Widepac 3L hydration system and the CE certified Level 2 removable back protector supplied.

Made from a durable1680D fabric, the Octane Tech Vest has been designed to offer a versatile increase in storage ability for the extra gear you require on the fly. With multiple pockets easily accessible whilst being worn, life just got a whole lot easier. Being able to interchange the Octane Tech Vest when needed significantly adds to the versatility and load carrying ability of any CONFIGR8 pack system.

The Octane Vest can be easily attached to any CONFIGR8 backpack via our unique tool free Ladder Lock System. Once connected there are nine easily adjustable positions to ensure a custom fit. Comfort is assured with a soft-vented mesh liner and two removable Nitrile EVA foam padding inserts. The unique application of quad load distribution straps stops the pendulum effect of the backpack, allowing it to be fully loaded and still maintain a balanced position. The quad load straps also distribute the weight evenly over the chest reducing the apparent load effect of the pack and freeing up shoulder movement. 

Not compatible with older V.2 backpacks.

The Exotec chest protector is a hard shell polycarbonate chest plate that offers optimal airflow keeping you cool whilst offering full roost protection. The chest plate is ergonomically attached to any CONFIGR8 backpack pack by the use of a ventilated Soft Shell shoulder guard further enhancing comfort. Zac Speed Exotec protectors come in two sizes (refer sizing chart) Medium/Large and XLarge/XXLarge.

The Unique application of the quad load distribution straps allow the backpack to be fully loaded and still maintain a balance position on the user without riding up the chest offsetting the pendulum effect. The quad load distribution straps also reduce the apparent weight effect of the pack load by distribution of the effective load through the entire chest plate. The chest plate can be fitted and removed effortlessly via the tool free CONFIGR8 ladder lock system.

The POV harness is the ultimate integration of wearable video camera mounts utilizing a backpack harness system. The POV harness easily integrates with any CONFIGUR8 pack system via the unique ladder lock system allowing you to catch hours of video footage without the need for any additional straps or mounts. Simply attach the camera to the universal camera mount turn it on and launch. No more mucking around, the chest mount is easily accessible for set up and offers one of the most immersive perspectives for action sport footage.

When your done taking footage you can remove the POV harness and interchange it with any other CONFIGR8 system or simply revert back to a standard configuration backpack in less than a minute. The universal design of the POV mount allows for an endless range of options. The great thing about this design is that it's super flexible—only your imagination sets the limits! If you're thinking about hitting the trails at night, whether it’s planned or spontaneous, you can easily adjust the mount to work with lighting systems.

The Matrix Tool Pack was developed for the ultimate in versatility, with the convenience of a removable tool roll, and the adaptability of the CONFIGR8 Pack System. The Matrix Tool Pack is made from heavy-duty 1680D fabric with Hyperlon gripper backing, ensuring superior durability and performance when being worn forward or rear facing. Vented waist belt padding ensures optimal comfort and ventilation all year round.

The Matrix Bum bag has been designed to offer easy tool access whilst being worn with a clear window map pocket that can be seen with out removing the bum bag. The internal tool roll can be removed, making the Matrix pack a versatile multi-role pack system for all tasks. Designed with a removable waist belt, the Matrix pack can be integrated seamlessly with any CONFIGR8 pack system, further enhancing comfort and reducing rider fatigue.

The Recon S-3 has been designed for intermediate distance rides and is a mid sized pack. The Recon has the flexibility of free load storage space on the outside with increased internal storage above the smaller Sprint R-3. This pack also has a large outer pocket that can hold the Zac Speed tool roll (not supplied) when not used with the optional Matrix Tool Pack. Like the Sprint, the Recon pack is made from durable 1680D Poly fabric to ensure it meets the demands of the tough off-road environment with high quality YBS zips. With three compartment pockets, one internal soft lined goggle pocket and two external technical pockets the Recon has ample storage options for trail rides.

The Recon comes standard with high quality Source 3 Lt/100oz bladder system with a quick connect hose system. The Recon pack has been designed with a wide vented TPR waist belt system to keep the pack stabilized whilst offering optimal comfort and ventilation. The pack is also equipped with the Zac Speed CONFIGR8 pack system allowing you to customize your pack with other CONFIGR8 elements for superior flexibility and adaptability.

The Sprint Enduro backpack has been purposely designed for short fast competition rides with its minimal design and aggressive graphics. The Sprint R-3 is a fourth generation pack that adopts the NEW CONFIGR8 adaptive pack harness system. In keeping with tradition the Sprint is a low profile design to minimize lateral and vertical movement. To optimize comfort and stability we have used a vented TPR waist belt system with enhanced padding profiles for improved ventilation.

A 3L hydration system provides ample water storage whilst offering 3 individual compartments with two deep sidewall pockets for maximum flexibility. A wide aperture main compartment access allows for quick easy bladder installation. The Sprint also comes with a removable pack shield to improve protection and maintain the ventilation structure of the pack. The back panel-padding uses a Bio-foam design for improved comfort and easy access to the pack ladder lock system and pack shield compartment. 

• Lifetime Warranty
• 100% waterproof with electronically heat welded seams
• Made from durable UV Coated 24 oz. PVC Tarpaulin
• Watertight roll closure with quick release buckles
• Padded back panel conceals backpack straps when using as a tail pack
• Securely mounts using 4 NEW RIGG STRAP™ system 
• Purge valve makes for easy compression  
• Front MOLLE panel includes a clear waterproof document pocket
• Integrated external pocket to hold optional hydration bladder (CL-HYDRO-S not included)
• 1 side bottle pocket large enough to hold 30 oz. fuel bottles (Bottles not included)
• Backpack straps are adjustable and padded for comfort
• Dimensions: 12.5”L x 7”W x 21.5”H
• Holds approx. 30 liters

The perfect dry trail pack from Moose. Constructed of heavy-duty waterproof tarpaulin with heat-welded seams. Heavy-duty ITW quick-release buckles and YKK water-resistant zippered external pockets make for a versitle bag.

The roll-down top creates a truly waterproof seal for the main compartment. Dual compression straps provide a secure closure and can be used to store gear externally as well. Coated tarpaulin material makes cleaning a breeze. Available in three great sizes - 25, 40 and 60 liters.

If you like these bags, you might like the matching ADV1 Backpack.

Ultra lightweight polyester (with PU coating) waterproof material, sealed seams, and heavy-duty ITW quick-release buckles make these a great bag for temporary packing or organizing items in larger bags and staying dry regardless of what they are packed in.

Available in a single 25 liter bag or a set of three bags that include a 2 liter, 5 liter and 10 liter bag.

A collection of waterproof bags made by industry giant Givi. There are five different bags available, a 30, 20, 40 and 80 liter waterproof roll top bags and then a 20 liter back pack with padded straps and padded back.

• Made with Industry leading UltraMax® fabric
• Maximum UV protection against fading
• Heavy duty webbing and buckles for easy and secure mounting
• Fully expandable (Dual Sport/Enduro & Adventure only) with reflective piping
• Rigid construction allows the bag to hold its shape when empty
• Water resistant lockable zippers help keep out dust and dirt
• Inner self-fastening straps to better secure contents
• MOLLE panel on lid allows other items to be strapped down
• Rubberized carry handle for easy transport

The glove box for your motorcycle! The Zigzag handlebar bag is their smallest bag yet also one of their most popular. Sometimes you only need the basics like your wallet, phone, registration, and other small items, and no matter what you’re riding, the Zigzag handlebar bag delivers quick and easy access to the basics.

• VOLUME: 1.5 liters (92 cubic inches)
• DIMENSIONS: 10.5” L x 2.5” W x 4” H (27 cm L x 6 cm W x 10 cm H).
• MATERIALS: Rugged Bomb Shell™ vinyl coated fabric, and Mil-spec materials and hardware.

Possibly the ONLY water, dust, mud, and snowproof fender bag on the market today! Giant Loop’s adventure-proof version offers a roll top design and secure connection options for most dirt bike plastics that, when properly installed, stays on no matter what the adventure. Sized to fit a full-length set of tire irons and other relatively small, lightweight essentials, such as a spare inner tube, CO2 inflator, gloves, and other trail essentials.

• VOLUME: 3.5 liters
• DIMENSIONS: 10.5″ x 5.5″ x 3″
• WEIGHT: 13oz when empty
• INCLUDES: 2 Rubber Boa Straps – mil-spec elastic shock cord with heavy-duty injection molded components

The low-profile Klamath Tail Rack Pack keeps gear organized and easily accessible — like a tank bag for the tail end of the motorcycle. The 4-liter soft luggage case features a zipper-less nested clamshell design inspired by classic motorcycle rally racing packs.

The Klamath attaches securely to virtually any motorcycle tail rack, many dirt bike rear fenders, and Giant Loop’s Siskiyou Panniers or MoJavi Saddlebags. Now even faster and easier to install and remove, with two included 25″ Pronghorn Straps.

• VOLUME: 4.0 liters (244 cubic inches)
• DIMENSIONS: 11” L x 8.5” W x 4.75” H (28 cm L x 22 cm W x 12 cm H).
• MATERIALS: Rugged Bomb Shell™ vinyl-coated polyester, Mil-spec materials and hardware.

With 3.5-liters of packable volume, the super-rugged, universal roll-top Possibles Pouch™ provides enough capacity to carry a set of tire irons, spare tube, compressor, tools, and other small offroad essentials. The bag also allows one to add external pockets to Giant Loop’s MoJavi Saddlebag, Coyote Saddlebag, Great Basin Saddlebag, and MotoTrekk Panniers.

The Possibles Pouch gear pocket is 100% waterproof, dustproof, and mudproof. It can be anchored to engine guards, crash bars, tail racks, or any other secure attachment point on virtually any motorcycle make or model. Add Giant Loop’s bolt-on Tail Rack for an instant trail riding solution that gets the weight off your body and onto the bike for improved performance and less fatigue.

• VOLUME: 3.5 liters (214 cubic inches)
• DIMENSIONS: 10.5” L x 5.5” W x 3.0” H (27 cm L x 14 cm W x 8 cm H).
• MATERIALS: Rugged Bomb Shell™ 500D PVC tarpaulin body.

Keep essential items easily accessible with the OBR ADV Gear Sherpa Tail Bag. The OBR ADV Gear Sherpa Tail Bag attaches to your motorcycles rear rack via an optional strap free base panel or by a series of adjustable buckle straps. A padded spacious main compartment is perfect for carrying those items you wish to keep close such as tools, cameras, documentation, rain jacket, etc. A smaller mesh lid pocket sits above the main pocket for storage of smaller items.

Features

• High strength, abrasion and water resistant ballistic nylon construction 
• Heavy duty #10 coil zippers with storm flap
• Secure attachment to your bikes rear rack via an optional strap free plastic mounting plate or adjustable buckle straps
• Spacious and padded trapezoid 9x10x5 main compartment 
• Secondary lid mesh pocket adds even more storage
• Three sided reflective webbing with Molle loops
• 4 external D-rings on top lid with 3mm shock cord gives you a place to put those gloves during a ride break

“Extras” are a common factor before and during any adventure. “Extras” are defined as items that either lose their organized place or are simply acquired during a trip. The OBR ADV Gear Extras Pouch is the perfect solution for these miscellaneous items. The OBR ADV Gear Extras Pouch helps to keep these items within easy reach as standard storage that needs to be accessible during the day or as simple overflow.

Features

• Heavy duty industrial material construction with high strength UV resistant nylon webbing
• Heavy duty #10 coil zipper that won’t jam up in the dust
• Protective foam padded bottom 
• External reflective webbing with universal Molle loops
• Base webbing loops as alternate attachment option
• Pouch dimensions 6” x 14” x 3.5”
• Attach to existing soft luggage or as a top lid pouch for hard side cases

Secure storage of a spare tube, tire irons, or random miscellaneous items is a must for any trail ride or adventure. The OBR ADV Gear Fender Bag is constructed from a heavy duty industrial grade ballistic fabric that secures tightly to any fender via oversized heavy duty gutter hooks. The OBR ADV Gear Fender Bag also utilizes an optional double button snap system that when used eliminates any potential for shifting of the fender bag when riding off road or over rough terrain.

Features

• Heavy Duty industrial grade material construction with high strength UV resistant nylon webbing
• Heavy duty dust resistant #10 coil zipper with cover flap 
• Secure attachment with oversized heavy duty gutter hooks
• Optional secondary button snap retainment system
• Sized to fit most HD 18” or 21” tubes

This is a great tail bag for anyone looking for a mix of a saddle bag & tail bag. If you have a Cycle Racks rear top rack on a TW200, it lays nicely across giving you plenty of storage.

• 1200-denier Technolast water-resistant, UV-treated polyester construction
• Large main compartment and two smaller side pockets (52 Liters in total)
• Unique anchor knot attachment system features anti-slip cam buckles
• Anti-scratch base
• Rain cover with pocket
• Installs over the passenger seat and part of the tail section; fits bikes with a tail section width of 10.2" or less
• Measures 15" L x 27" W (front; 20" rear) x 16" H (from top of bag to bottom of overlapped sides); 7" H from top of bag to seat in front (5" in rear)

Auxiliary fuel tanks mount to handlebars, forks, or rear racks.

• Suitable for minis, trials bikes, full size bikes, and anywhere else a little extra fuel is needed.
• Each tank includes a siphon kit that connects the tank to the main fuel tank and automatically siphons fuel while the bike is being ridden.
• With this design, the auxiliary tank empties first, before the main tank.
• Does not interfere with headlight, handguards, rear seat, etc.

Introducing the Armadillo Bag®—your new best friend for on-the-go adventures! These flexible, collapsible, and lightweight utility bladders are perfect for safely transporting and storing liquid hydrocarbon products, as well as other powersports and automotive fluids. Choose from a variety of sizes: 1, 2, 3, and 5 gallons. Plus, each bag comes with a handy pour spout for easy use.

Features:

• After the fluid is dispersed the Armadillo bag can be collapsed rolled up and stored in a compact areas like backpacks, rack bags or under the seat of the vehicle.
• Daisy loops on bags allow the bags to be attached almost anywhere, backpacks, utility racks, snowmobile/snow bike tunnels, UTV beds.
• Armadillo bags will not tip and spill like traditional hard containers.
• Weight and space savings over rigid fuel containers are significant advantages of the Armadillo Bags.

Armadillo Bags are not portable fuel containers as described by ASTM, EPA, ARB or other state and federal agencies. Armadillo Bags are NOT intended for fuel storage or transport in the USA.

RotoPax are Rotational Molded - the process which produces indisputably superior products.

• Thicker walls and stronger construction
• Bright colors that are less prone to fading
• Extra threads, thicker walls, and sure-seal gasket guarantee no leaks

Need to mount two containers? A water and a fuel? Two waters? Finally, you can stack multiple packs together! Use in conjunction with a pack mount. You will need to purchase the Single Mount as well as the Extender.

RotoPax holder made to mount a single Fuel and/or Water container.

Need to mount two containers? A water and a fuel? Two waters? Get the extender which allows you to stack two containers no problem! Single mount, two containers

Need to mount two containers? A water and a fuel? Two waters? Already have a RotoPax Mount for a single container? Get this extender to work in conjunction with a pack mount and that will be no problem! Single mount, two containers.

Here we have right side plate that bolts to our ProCycle Side Racks for mounting your RotoPax fuel or water containers.

Limited quantity available for right side only.

RotoPax holder made to mount a single Fuel and/or Water container.

This unique design adds strength and provides extra tightening power.

Use with included base plate or remove plate to attach mount direct by bolting up through the bottom or down through the top.

Nomadic Rack for the TW200. CNC laser cut from 3/16" 5052 aluminum with a large 12 x 10-7/8 mounting surface area. Sand blasted and then powder coated black to give it a shot peened look. This rack is an easy installation with a 4 point mounting system with no modifications required. There are multiple strap slots for securing gear bags and cargo. Doubles as a grab handle or tow bar. Is compatible with RotoPax mount. All hardware and instructions included.

You may purchase just the rack or you can order the Rack with the RotoPax Mount. If you really want it all, you can order the Rack, Mount and a Fuel or Water Container.

The Happy Trails SL (Soft Luggage) Racks work perfectly with the any soft luggage bags.

Features:

• Thoroughly tested 4th generation side racks
• Three point mounting system (includes mounting hardware)
• Strong 5/8" round tubing for the arms and SL mounting loop
• Racks add protection for the bike in the event of a tip-over
• Each rack is fabricated by expert craftsmen
• Racks finished with a black powder coat

For mounting Hard Cases to various brands of side racks such as SW motech EVO quick lock, Moose or any racks with a rectangular design constructed with 5/8" to 3/4" material

A high quality rack for the XR250R and XR400R. CNC milled from billet aluminum. Strong, light and good looking.

Need to mount your turn signals to your new Pro Moto Billet Rack? Just add a set of CNC machined aluminum Turn Signal Brackets for $15.95 and that will be no problem.

Steel cargo rack from Moose Racing. It features a nice wide platform and a durable powder coat finish. 17" wide and 10" long.

• 12-gauge steel construction
• Multiple tie-down locations
• Easy installation with no modifications required, all mounting hardware included
• Powder-coated black texture finish
• Holds up to 40 lbs.

Simple, quick installation of this 1 pound rack made from rugged 1/8" 5052 Aluminum. A rigid 4-point mounting system, but still sleek and low allowing for seat removal with no hassles.

Features:

• 12" long by 10" wide
• Integrated turn signal mounts
• Use with or without stock grab handles
• 16 strap slots for securing cargo
• RotoPax mounting kit compatible
• All hardware and instructions included

Not only are Pro Moto Billet Cargo Racks brutishly strong and functional, but they look great too. Each cargo rack is methodically engineered, then CNC machined on-site from a 1/2 inch thick plate of USA made 6061 aluminum by master machinists.

The cargo racks are then hard clear anodized for durability. PMB uses only stainless steel fasteners for worry-free years of riding. Excellent instructions and all necessary hardware is included. 10.5"Wx11.5"L

Need to mount your turn signals to your new Pro Moto Billet Rack? Just add a set of CNC machined aluminum Turn Signal Brackets.

Cycle Racks Bag Supports can used for many different Cycle Racks and can be used on either the front or rear rack.

When they developed these, they wanted a functional, yet "Easy On- Easy Off application. The pig tail hook goes up, over and underneath the bar of the rack, they can also be used upside down on the rear rack as side boards. To install them, wing them out, slide them in place and then wing them back down. Simply reverse the process to remove them.

Rok-Straps are supplied to secure them in place. They are pre-drilled to accept the pattern of the Roto-Pax Pack Mount (sold separately) so you can carry fuel or attach them to your own bags.

They are sold together in a set of one right support and one left support.

COLOR: Black

This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature. It is an easy install and will allow you to strap your cooler, lunch box, tools, extra gas can, or whatever on the back of your bike. Comes complete with all hardware and easy install instructions.

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready!

This is the ENDURO Series TW200 rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Instructions included, uses stock hardware.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.
• Ready for your 1 gallon Rotopax can and mount
• 1.75 gallon Rotopax fuel can is not recommended with this rack

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready!

This is the ENDURO Series DR650 rear rack which measures 10 inches wide and 12 inches long.

• Great for carrying cargo, duffel bags/backpacks, and mounting Pelican, Seahorse, or any other hard cases. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.

Our ProCycle top rack is designed and manufactured by dual sport riders that know what it takes to create a durable and versatile luggage rack.

Our racks allow for easy installation of both soft and hard luggage.

• 5/8" steel tubing
• Computer precision bending
• Durable powder coat finish
• CNC cut brackets
• Top rack dimensions 15" wide 11" long
• Top rack has RotoPax and hard case mounting tabs
• All mounting hardware included.

Top rack only, side racks sold separate.

The ProCycle side rack is designed and manufactured by dual sport riders that know what it takes to create a durable and versatile luggage rack.

Our racks allow for easy installation of both soft and hard luggage.

Side racks only, top rack sold separate.

Compatible with the following top racks:

• ProCycle
• Pro Moto Billet
• Pat Walsh
• Nomadic
• TCI Borrego
• Stock Suzuki (must grind 1/8" off inside of frame mounts)

ProCycle rack installation requires removal of the stock grab bars. Turn signal brackets will be needed if using a top rack that doesn't offer turn signal mounting holes.

Construction

• 5/8" steel tubing
• Computer precision bending
• Durable powder coat finish
• CNC cut brackets
• All mounting hardware included

• Great for carrying cargo, duffel bags/backpacks, and mounting Pelican, Seahorse, or any other hard cases. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series CRF300L rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series KLX230 rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. This requires an extra hardware kit available for free by request only.
• Rear rack only, no Rotopax mount or side racks included.

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series KLX300 rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. This requires an extra hardware kit available for free by request only.
• Rear rack only, no Rotopax mount or side racks included.

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series XT225 Serow rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. This requires an extra hardware kit available for free by request only.
• Rear rack only, no Rotopax mount or side racks included.

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series CRF250L rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series CRF450L rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.

Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series DRZ400S/KLX400S rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Great for carrying cargo, duffel bags/backpacks, and mounting Pelican, Seahorse, or any other hard cases. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.

Using the included steel bracket to create 2 forward mounting points, this XT250 rack design is stronger and more well balanced than the typical "plate on the rear fender" design offered by other companies.
Their rear racks are great for adding the extra storage needed for your next adventure. They are the perfect size for a backpack or small duffel bag. Their steel racks are built to handle any riding style you throw at them, now Rotopax ready! This is the ENDURO Series XT250 rear rack which measures 10 inches wide and 12 inches long.

Easy to Install

• Works great for mounting Pelican and Seahorse cases, or any other hard case. Givi compatible.
• Holes are in place to accept Rotopax mount with no drilling required.
• Stainless steel mounting hardware and instructions included.
• Fabricated with mild steel, MIG welded, and finished with a semi gloss black industrial grade powder coat.
• Weighs 3 lbs, 10 inches wide, 12 inches long.
• Works with stock tool bag. You can remove the seat with no interference from the luggage rack.
• Rear rack only, no Rotopax mount or side racks included.

This carry rack is solid and durable made from 5052 aluminum and with its sleek design it will not catch on your clothes or nature.

It is an easy install and will allow you to strap your cooler, lunch box, tools, or whatever on the back of your new Yamaha.

Comes complete with all hardware and easy install instructions.

A durable, lightweight option for your TW200 when transporting flexible luggage on the trail.

• Made of 15mm thick HDPE high density polyethylene plastic which is both durable and non-corrosive.
• Weighs up to 30% less than metal or aluminum racks.
• Convenient tiedown points designed into rack
• Kit includes mounting hardware.

Small scuff on sticker, shown in picture. Sold As Is.

Designed to make your compact rack even more versatile for riders who need a larger luggage platform. 

• Comes in polished.
• All hardware for mounting is included.
• Made from 5mm thick cnc machined plate
• Weighs 1kg
• Multiple attachments points 
• Pre drilled for Givi monokey mount system
• Pre drilled for roto pax fluid containers
• This listing is for the Rear luggage plate only
• Dimensions 25cm x 26cm flat surface 
• Does not include Pillion handles or base tail rack. Please see other listings for these items

CNC laser cut from 1/8" aluminum with a large 12.5" (length) x 10" (width) mounting surface area. Quick installation with a 4 point mounting system and no modifications required. There are integrated turn signal mounts, along with multiple strap slots for securing gear bags and cargo. All hardware and instructions are included.

The Rack is compatible with all RotoPax mounts.

You may purchase the rack alone, or you can order the Rack with the RotoPax.

Nomadic Racks makes this beautiful rack for the XT225. 3 piece unit that is CNC laser cut from 1/8" 5052 plate aluminum with a semi-gloss industrial black powder coat applied. Final surface space is 9 x 14 with a weight just under 2 pounds.

With all the hardware included and excellent instructions, mounting this rack to the 4 mounting points is usually no more than a 15 minute affair and no modifications are required to your XT.

There are numerous strap and bungee holds making for a very versatile little unit. It is also totally compatible with RotoPax mounting kits and Givi top cases.

• Powder coated black (shot peened look)
• Fully welded construction
• Rigid 4 point mounting system
• Hardware and detailed instructions included

The Happy Trails SL (Soft Luggage) Racks work perfectly with the Wolfman Expedition Dry Bags.

Features:

• Three point mounting system (includes mounting hardware)
• Strong 5/8" round tubing for the arms and SL mounting loop
• Racks add protection for the bike in the event of a tip-over
• Racks finished with a black powder coat

This kit fits all Nomadic tubular type racks. (All flat stock racks are already RotoPax compatible)

The second image shows the kit, which includes all the hardware and instructions required. The lower image is just an example of what the eXpander looks like mounted to one of their racks.

• CNC laser cut from light weight 1/8" 5052 Aluminum
• Easy installation, no modifications required
• Large 12" x 9" surface area
• Sleek low profile, and lightweight!
• Rigid 4 point mounting system
• RotoPax 1 gal or 1.5 gal compatible

You may purchase just the rack or you can order the Rack with the RotoPax Mount. If you really want it all, you can order the Rack, Mount and a Fuel or Water Container.

The B&B Off Road Engineering rear carry rack is made from 4mm aluminum 5083 plate. This plate is chosen because of its extreme suitability for welding, abrasion and impact resistance, bearing in mind the full weight of the bike and rider. All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible. Our carry racks are Tig welded with a polished finish and are sturdy enough to use as a grab handle.

DIMENSIONS

Width Flat Surface Approx 18cm

Length Approx 33cm – Total Length Approx 45cm

Please Note- To fit rack, two holes need to be drilled into the rear guard. The position of holes are already marked on genuine Yamaha guard so no template is required.

• 12-gauge steel construction
• Multiple tie-down locations
• Easy installation with no modifications required
• Hold up to 40 lb.
• Powder-coated black texture finish
• All mounting hardware included
• Made in the U.S.A.

Not only are Pro Moto Billet Cargo Racks brutishly strong and functional, but they look great too. Each cargo rack is methodically engineered, then CNC machined on-site from a 1/2 inch thick plate of USA made 6061 aluminum by master machinists.

This beautiful polished rear carry rack from B&B Eng. is made from aluminum tubing and 4mm 5083 plate. 5083 is used because of its suitability for welding and high level of abrasion and impact resistance. Kit includes all the necessary stainless clamps and bolts. With the roundness and strength of the tubing supports, it makes a great grab handle when you need to lift the rear of the motorcycle.

The Nomadic Rack for the early generation KLR650. CNC laser cut from 3/16" 5052 aluminum with a large 12" x 18" mounting surface area. Sand blasted and then powder coated black to give it a shot peened look. This rack is an easy installation with no modifications required. There are multiple strap slots for securing gear bags and cargo. Rack is compatible with RotoPax mount. All hardware and instructions included.

Packages available include Rack with the RotoPax Mount or if you really want it all, you can order the Rack, Mount and a Fuel or Water Container.

PMR side utility racks are great for strapping down your soft luggage and keeping it off the rear plastics and exhaust pipe, while adding plenty of new tie down points for any luggage you have on your seat or tail section. They also add an enhanced level of security and strength to the rear end of your motorcycle in the event of a tip over or crash. 

Sold as a pair.  Easy to Install

• Complete with all necessary mounting hardware
• Fabricated with 1/2 inch steel tubing, MIG welded
• Finished with a semi gloss black industrial grade powder coat
• Comes with left and right side racks, each side weighs 2 lbs

Precision Motorcycle Racks strongly recommends these side racks be used with their Top Rack because the racks use each other to mount properly. They were never intended to be used by themselves without the rear rack. 
If you are going to mount these side racks without the use of their top rack please select the extra hardware kit option that includes 2 brackets, 2 steel spacers, and an extra hardware kit that is required for proper installation.

These side racks will not play nice with any other brand rear rack, and installation without their top rack will prove to be quite difficult.

PMR side utility racks are great for strapping down your soft luggage and keeping it off the rear plastics and exhaust pipe, while adding plenty of new tie down points for any luggage you have on your seat or tail section. They also add an enhanced level of security and strength to the rear end of your motorcycle in the event of a tip over or crash. 

Sold as a pair.  Easy to Install

• Complete with all necessary mounting hardware
• Fabricated with 1/2 inch steel tubing, MIG welded
• Finished with a semi gloss black industrial grade powder coat
• Comes with left and right side racks, each side weighs 2 lbs
• The TW200 side racks are intended to work hand in hand with our ENDURO Series rear rack.

PMR side utility racks are great for strapping down your soft luggage and keeping it off the rear plastics and exhaust pipe, while adding plenty of new tie down points for any luggage you have on your seat or tail section. They also add an enhanced level of security and strength to the rear end of your motorcycle in the event of a tip over or crash. 

Sold as a pair.  Easy to Install

• Complete with all necessary mounting hardware
• Fabricated with 1/2 inch steel tubing, MIG welded
• Finished with a semi gloss black industrial grade powder coat
• Comes with left and right side racks, each side weighs 2 lbs

The CRF300L side racks are intended to work hand in hand with their ENDURO Series rear rack. 

If you plan on installing the side racks without their rear rack, you will need the spacer kit to fill in the empty space, which we will send to you at no extra cost. Please select the option when you place this in your cart.

Please note that you will need to remove the left side rack to access your lockable factory storage hatch.

CNC machined from 5mm aluminum 5083 plate with lots of slots to attach your Rok Straps (or other straps). This gives a considerably wider deck than the standard B&B Rack. Attaches directly to the B&B rack with four screws that are included. Available in either polished aluminum or a black polymer coating.

These plates are pre-drilled and countersunk from the bottom making installation of a RotoPax mount quick and easy.

Some older carry racks will not have predrilled holes in them to mount luggage plate in which it will require you to drill yourself (select pre2018 version)

  This is for the add -on Top Plate only.

Hand built aluminum luggage rack from the B&B Off Road Engineering folks down under. This unit really is a beauty to look at and extremely rugged, made from 4mm 5083 aluminum plate! Tie down whatever you need with confidence. Whether it's your books to get to school or a bag to get across the country, no worries mate. Available in either bare polished aluminum or with a black polymer coating.

While plenty rugged to use as grab handles, you can keep your stock handles if you so desire. All necessary stainless clamps and bolts are provided.

If you want a wider platform for support, consider adding the luggage plate to this rack.

  Bike must have the DR250 Taillight installed to work with this rack.It will not work with the stock USA taillight.

DRZ400 rack is available in both a Utility and Sport version. The Sport version is 9" x 9" and the Utility is a full 2" longer for added storage space. Both of the S/SM racks have tabs so you can bolt the stock tool bag on.

Please select the rack for your specific model as the differences are significant

• Fully welded construction from 16 gauge mild steel
• Powder-coated black textured finish
• Rigid 4 point mounting system (except off-road model rack)
• Hardware and detailed instructions included

Not only are Pro Moto Billet Cargo Racks brutishly strong and functional, but they look great too. Each cargo rack is methodically engineered, then CNC machined on-site from a 1/2 inch thick plate of USA made 6061 aluminum by master machinists.

The cargo racks are then hard clear anodized for durability. PMB uses only stainless steel fasteners for worry-free years of riding. Excellent instructions and all necessary hardware is included.

Need to mount your turn signals to your new Pro Moto Billet Rack? Just add a set of CNC machined aluminum Turn Signal Brackets.

This DRZ400 rear rack, hand-built by B&B Engineering in Australia is made from 4mm aluminium 5083 plate tig welded to the support tubing circumventing the plate. This material was chosen because of its extreme suitability for welding as well as abrasion and impact resistance, and all of this keeping in mind the full weight of the bike and rider. Once complete they are given a polished finish or coated with a super-durable black polymer. All Carry/Luggage Racks are supplied with the necessary stainless clamps and bolts where possible.

These racks are smooth and sturdy enough to use as a grab handle.

Check out the bolt-on Luggage Plate for the B&B Rack for those times you need to carry a larger load!

Increase your fuel and/or water carrying capacity. This mounting plate attaches to the OEM Suzuki rear rack and accepts the standard RotoPax mounting pedestal. The use of pressed-in threaded mounting hardware allows for quick and easy installation of the plate and pedestal. When not needed the RotoPax pedestal can be quickly removed and the tidy JNS mounting plate left in place.

• 0.125" 5052 Aluminum, Laser cut / CNC formed
• Powder coated black
• Includes stainless mounting hardware

Order alone or with RotoPax Mount and Water or Fuel container. Get everything you need at one time.

Not only are Pro Moto Billet Cargo Racks brutishly strong and functional, but they look great too. Each cargo rack is methodically engineered, then CNC machined on-site from a 1/2 inch thick plate of USA made 6061 aluminum by master machinists and then anodized black.

PMB uses only stainless steel fasteners for worry-free years of riding. Excellent instructions and all necessary hardware is included.

Need to mount your turn signals to your new Pro Moto Billet Rack? Just add a set of CNC machined aluminum Turn Signal Brackets for $15.95 and that will be no problem. See bottom image.

Wide Adventure rack for the WR. Precision laser cut from .25" 5052 aluminum then powder coated black with a shot peened look. This rack is 11" x 17.5" and has numerous tie points for straps or bungees to secure a load. It is pre-drilled for a RotopaX mount. Easy installation means it is bolted to the bike in 10 minutes. There is some minor drilling of the plastic to be done. All necessary hardware and complete instructions included.