Search Products

GoldPlug is the gold standard in engine protection.

Stainless steel drain plug with an extremely strong magnet that picks up metal flakes in your oil.

12mm Thread, 17mm Head.

GoldPlug is the gold standard in engine protection.

Stainless steel drain plug with an extremely strong magnet that picks up metal flakes in your oil.

10MM Thread for frame drain.

A full set of EBC friction plates. Make sure to order a new gasket as well.

For easy removal of recessed oil filters.

Conical point screws pierces and grabs the metal end cap of the filter.

reduces potential damage to the engine cases.

NOT for use on re-usable oil filters.

Universal 3 bolt flywheel puller.

Complete with hardware kit and adapter for male or female removal.

• Allows precise valve lash adjustment without disturbing the setting when the lock nut is fastened
• Knurled knob on adjuster drivers ensure a precise and secure grip
• Integrated repositionable wrench handle holds the lock nut while the drivers are used to loosen or tighten the valve adjustment screw

Set includes:

• (1) 10mm steel socket wrench
• (1) 3mm square tappet adjuster

What would you do if your oil cooler was damaged way out in the bush? We have a simple solution. This kit allows you to bypass the oil cooler and both oil lines and insure that the top end continues to get the oil it needs to stay healthy. Simply remove the stock oil lines from the motor and attach one end of the bypass at the head and the other end at the engine side case. Be sure to leave the original o-rings in place.

Small, light weight and easy to carry. You may never need it but if you do it will save you a lot of walking!

Dragging clutch? Hard to find neutral? Maybe it feels like it doesn't fully release. These problems can be caused by worn thrust washers in the clutch assembly. Most DR650s show wear on these items. Kit includes #1, #2 and #3 in the diagram.

This gasket set is the same as the Complete Gasket Set above but includes all the necessary oil seals as well.

Bolt on horsepower! Stage 1: single-cam motor. Excellent midrange and top-end power increase. Uses stock valve springs and rockers.

Fitment Specs: Exhaust Lift: 5.9; Exhaust Duration at 1.00mm: 223°; Intake Lift: 6.8; Intake Duration at 1.00mm: 227°

Special tool to remove the flywheel/rotor from the end of the crankshaft. You have to remove the flywheel/rotor to upgrade the doohickey.

Stock and typical after market drain plugs can protrude past some skid plates. This steel low profile drain plug stays inside the skid plate so it can't be snagged by passing objects.

Comes with 4 crush washers.

Complete Doohickey Replacement Kit now includes the outside cover gasket. Complete kit includes:

• Doohickey from Eagle Manufacturing (No longer includes extension springs. The torsion spring is far superior)
• Torsion spring with drill bit
• Wrench to hold the rotor
• Puller to remove the rotor
• Replacement bolt for rotor
• Generator cover gasket
• Left side outer cover gasket

Providing unbeatable performance and exceptional value, Hi-Flo Filter is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.

Genuine Suzuki Factory Service Manual for the DR200.

OEM valve cover o-rings

As the leader in innovation, design and development of aftermarket high-performance camshafts, Hot Cams is certain to provide the added boost that enthusiasts are looking for.

Designed, dyno proven and made in the USA, Hot Cams performance camshafts are one of the most economical, reliable and easy to install ways to add a 5-10% power gain to your bike.

Stage 1: These cams provide better low RPM torque, pulling power, and throttle response.

Stage 2: These cams will provide improved full throttle torque and horsepower starting at 4000 RPM and up.

Complete set of clutch friction plates for your V-Strom.

Direct replacement for old or broken stock spark plug caps.

Spark plug caps contain a resistor that can burn out with age. Fresh caps ensure your motor gets a strong spark.

• Sold in pairs.
• Adaptable thread size
• 5k Ohm
• Allowable wire diameter 7 mm-8 mm
• 120° elbow
• Spark Plug Resistor Cover - 10/12mm

The Neutral Sending Unit "NSU" on the DR650 can be a problem. The factory screws tend to loosen over time. You really would not want them to get loose in your motor! The permanent solution is to safety wire them. We looked high and low and finally found pre-drilled screws in the correct length and thread pitch. Here we offer a complete kit to take care of those pesky screws.

If you don't do this, you don't have a screw loose, you have TWO screws loose!

Kit Contents:

• 2 drilled stainless steel screws
• Plenty of safety wire
• Wire twisting tool
• New lock tab for the clutch hub
• New clutch cover gasket

A Suzuki OEM gasket for the Cam Chain Tensioner. You are going to need it if you work on your starter motor. It is not a good idea to re-use this gasket. If it blows out, it will dump a large amount of oil onto your right foot.

Adjusting your valves or setting your cam chain tension? Here are the O-Rings that fit in the TDC sight plug and the crankshaft nut access plug.

Made from medium carbon steel with hardened jaws. It features spanner pins and the jaws open up to 5" wide. It's ideal for holding clutch hubs, flywheels, gears, sprockets, etc. Made by Motion Pro.

Replacement friction plates and drive plates.

Moose Race Fit Radiator Hose Kit

• Manufactured by Samco® Sport UK – the world leader in silicone hose, with over 20 years experience
• Hand wrapped and 100% visually inspected in the UK
• European grade hi-temperature silicone guaranteed to 356°F
• Smooth flow and improved insulation promotes radiator efficiency and improves engine cooling
• Single-molded, Y-piece hoses eliminate the need to reuse OEM 3-way fitting, which reduces weight and eliminates leak points
• Single-molded, T-piece hoses eliminate vulnerable threaded leak points and reduce weight
• Three layers of reinforcement fabric offer high burst pressures and provide better debris/crash resistance
• Zero block tooling technology results in clear and open hose junctions, free from dangerous and restrictive flashing
• Used by leading MX/Enduro and Off-road racing teams
• UV-stable colors don’t fade with heat or sun and are color matched to OEM brands
• Clamps made from 18/8 marine-grade 100% stainless steel have rounded edges that prevent the clip from cutting into the hose and a non-perforated band prevents clip from biting into the hose
• Kit contains hoses and necessary clamps

Complete top end gasket kit for the mighty XT250

• High-tech materials provide unmatched reliability and performance
• Rebuild the top end with total confidence as each set is designed for durability and accurate fit
• Oil seals are genuine OEM replacement seals
• Performance sets designed for a piston replacement
• Includes every gasket, O-ring and seal required to rebuild a top end; valve seals, head, base, exhaust, tensioner, and other misc. gaskets and O-rings
• Does not include formed rubber valve cover gasket
• Formed valve cover gaskets are included in complete kit with oil seals

A brand new camshaft purpose built for the KLX140! The KLX140 is the ultimate trail bike. It just needs a little more power.

• Adds 1+ hp to fully modified motor (170cc Big Bore kit)
• Makes more aggressive race-style of power
• Bike still starts easily and idles smooth
• Same camshaft as used by the BBR Race Team
• No exchange required
• 92 octane ok

Note: The BBR KLX140 Performance Camshaft installs the same as the OEM camshaft (valve clearance IN: .002"-.003" / EX: .004"-.006"). We recommend you purchase an OEM Kawasaki KLX140 Service Manual to assist you when installing this camshaft.

Your automatic cam chain tensioner is spring loaded. This can make it difficult to install as it wants to extend before you have it bolted into place. This handy tool will back off the cam chain tensioner mechanism and hold it for you. No more awkward 3-handed contortions are required to get the tensioner installed.

High quality stator cover gasket. Genuine Yamaha part.

The key to getting your built DRZ/KLX motor to make big power.

• Intake is 32mm (stock 30mm)
• Exhaust is 28mm (stock 26mm)
• Available with or without Heavy-duty valve springs

The long awaited Wide Ratio Transmission from Nova Racing. Now you can have your trail gearing without giving up your highway gearing.

Both sets are lower than stock in 1st and 2nd gear and taller than stock on 3rd thru 5th gears. Not only will Nova give you better gear ratios but the high quality components will shift smoother and engage more solidly. The tables below show each gear ratio and the original OEM ratios for comparison.

To help put the ratio changes into perspective switching from the OEM 15T to a 14T sprocket lowers the gearing by 7.1% in all gears. Switching from a 15T to a 16T raises the gearing by 6.6% in all gears.

An upgrade over stock, these hard-welded premium rockers are highly recommended when upgrading your camshaft.

Kit includes all new OE adjuster screws and lock nuts.

Please see required core information below.

Complete set of engine gaskets with oil seals.

Heavy duty springs help prevent clutch slip in high-performance motors.

• Custom wound from chrome-silicon wire
• Preset for long life
• Higher spring seat pressure to resist clutch slip

Hinson Clutch Plates available as a set of just Fiber Plates or just Steel Plates or as a complete set including both.

Hinson Clutch Components sells the best clutch components available in the world. Hinson equipped machines have won 224 National and World Championships in our 20 years of business.

• Optimum hook up with minimum heat build up provides high performance
• Developed with and recommended to enhance the performance of Hinson clutch baskets, inner hubs, and pressure plates
• Exceptional production tolerances and flatness
• All fiber plates use organic non-abrasive materials to avoid damage to rest of motor as plate materials break down and are circulated through engine by oil
• Can be used with OEM baskets, inner hubs, and pressure plate

High performance camshaft for the KLX/DRZ110. Higher lift and duration than stock.

• Makes more aggressive "race" style of power
• Bike still starts easily and idles smooth

If you're plannig to or already have a stroker crank setup in your Yamaha WR250R/X, you'll need this stroker piston.

Features:

• All piston skirts are coated with a hi-tech Molybdenum Disulphite coating for faster break-in time and increased piston life
• Cast Replica piston kits are gravity cast aluminum alloy (not forged) with 18% silicone content, which produces an extremely light but very strong piston
• Forged Replica pistons are forged from 2618 aluminum for superior strength and durability
• Forged High Compression pistons improve power and torque across entire rpm range
• Forged Big Bore pistons increase engine’s displacement, torque, and peak horsepower
• Forged Replica pistons are forged OE replacements
• All pistons are heat treated with a T-5 hardening and tempering cycle
• Replica pistons and all rings are OEM replacements
• Kits include piston, rings, wrist pin and circlips
• Two stroke replacement rings are sold individually (Example if your piston has two rings you will want to order two rings)
• Four-stroke piston rings sold as a set

• High-temperature silicone guaranteed to 356° F
• Smooth flow and improved insulation promotes radiator efficiency and improves engine cooling
• Single molded, Y-piece hoses eliminate the need to reuse OEM 3-way fitting which reduces weight and eliminates leak points
• Three layers of reinforcement fabric offer high burst pressures and provided better debris/crash resistance
• UV stable colors don't fade with heat or sun and are color matched to OEM brands

Made from laser-cut, medical-grade, 304 stainless steel micronic filter cloth, this filter provides 200% more filter area over many paper filters, catching debris down to 35 microns. The FLO filter pleat seam is welded and able to withstand up to 600 deg. F. Filter maintains consistent flow under all conditions including extreme heat, the presence of water and cold start-ups where paper filters can flow so poorly that they often cause the bypass valve to open and allow unfiltered oil to enter your engine.

This cleanable oil filter should be the last one you ever purchase.

A 3-pack of easy to apply strips measure the temperature of engine, suspension, and radiator components. Temperature range 146° to 248°

If you need a new clutch, you probably need a new gasket to seal that cover when you are all done. Genuine Yamaha part.

Add a backup kick start system to your electric start DRZ400. Complete with everything you need to add the kick starter to your bike.

This kit will fit all DRZ400s but the manual decompression lever can only be installed on the 2006 to Current DRZ400 E models.

Clymer motorcycle repair manuals are written specifically for the do-it-yourselfer. Whether it's routine maintenance or more extensive repairs involving engine and transmission disassembly, Clymer repair manuals provide all the information you need about your motorcycle. With step-by-step procedures, detailed photography and extensive use of exploded views, each manual is based on the complete disassembly of the machine. Unlike OEM manuals, which are purposely designed for the professional technician with an impressive array of specialized tools, equipment and knowledge, Clymer manuals are designed for the first-time user.

The DR650 manual features 278 pages of color wiring diagrams, illustrations and photographs. There are 15 chapters, ranging from general information and troubleshooting to brakes, suspension and full color wiring diagrams.

Thread Chasers are designed to clean and re-cut damaged aluminum threads.

This kit contains the two sizes most common on metric motorcycles, M6x1.0 and M8x1.25.

Thread Chasers also remove dirt and metal shavings that become captured in thread grooves.

Uses 8mm or 10mm hex sockets, a Must for all tool kits.

This is the little rubber plug on the right hand side of the cylinder head. Replace this plug to avoid having an oil leak after disassembling your top top end.

Genuine Honda replacement thermostat

GoldPlug is the gold standard in engine protection.

Stainless steel drain plug with an extremely strong magnet that picks up metal flakes in your oil.

10MM Thread

K&L® shims exceed the maximum of the Apparent Rockwell Hardness "C" scale. Shims average 47.0 compared to the 46.0 maximum.

This kit fits KLR650 87-18 as well as other brands and models , please verify correct size for your model before purchase.

Providing unbeatable performance and exceptional value, Hiflofiltro is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.

You pay $3.40 per filter with our value 10-pack!

This high quality socket from Motion Pro, is specifically designed to reach into the very small, deep space where the spark plug of the XR hides.

Normal sockets simply won't work in this case.

Keep your motor running right with a fresh plug.

A Dual Electrode spark plug will last longer than a single electrode plug because the wear is shared between the electrodes.

Cylinder Works Standard Bore High Compression Cylinder Kit

• Uses Vertex #23550
• Compression Ratio 13.5:1
• Cylinder Diameter 90 mm
• Standard Bore, High Compression
• Displacement 400 cc
• Engine Type 4-Cycle
• Includes Cylinder, Piston Kit, and Top-End Gasket Kit

The starter bushing in the DR650 leads a tough life. Exhaust heat and minimal lube from the factory take their toll. Warp 9 has a high quality solution - a billet starter cover with a sealed ball bearing.

• CNC machined starter endcap
• Black anodized for good looks
• High Speed Abec 3 double sealed roller bearing installed
• Reduced amperage needed to start bike
• Brushes will have extended life

A 'wrench style' tool to turn the 'square top' tappet screws. The wrench does a better job of holding the adjuster screw still while tightening the locknut. Slim and flat, this tool is easy to carry in a tool pack.

• Complete set of friction plates, steel plates, and springs
• Heavy-duty springs help prevent clutch slip
• Restores proper stack height, fixes clutch slip caused by wear and tear

Replacing your clutch or removing that side cover for any reason? You are going to need a new gasket for the cover to ensure a leak-free assembly.

Genuine factory shop service and repair manual. This is the reference manual Yamaha dealers use in their service departments. It has all the necessary info to do any maintenance or repairs to your XT250.

• 26 straight blades
• SAE and metric markings
• Check for clearance on valves, ignition points etc.
• Includes 26 blades varying in thickness from .0015"/.038 mm to .025"/.635 mm

Includes forged JE 89mm piston 10.5:1 piston, Rings, Clips, Pin, big bore sleeve and top end gasket set. You will have to have the big bore sleeve installed in your cylinder and bored to fit the larger piston.

Need to remove your clutch assembly to get at that dreaded neutral safety switch? This holder is the quickest and easiest tool out there to get a grip on that hard to handle hub. Laser cut to the exact pattern that EBC makes their clutch plates from, it makes loosening and re-tightening the clutch nut easy. All of that and no worries about doing any damage to your expensive clutch hub.

Bottom line, if you have to hold your clutch hub to remove it, there is no better way to do it.

The complete Thermo Control package - Our in-house designed Thermostat Bypass kit, a set of Custom Silicone Hoses and a Hi-Pressure Radiator Cap. All combined to help your KLR cooling system be at the top of its game. The Thermostat Bypass kit includes a thermostat with a higher temperature rating that will keep the motor more in its happy spot.

The Silicone hoses are stronger than the stock rubber units and will better resist cracking and leaking.

Keep your motor running right with fresh spark plugs!

NGK is one of the world's largest manufacturer of spark plugs, whose products are used as original equipment (OE) on countless motorcycle and automobile models.

• High-quality materials and superior construction for serious power and reliability
  • Pure alumina silicate ceramic insulator provides high strength and better heat transfer
  • Deep-seated copper core for a wider heat range
  • Nickel alloy tip for longer life
  • Trivalent metal plating provides superior anti-corrosion and anti-seizing properties
• Choosing the right high-quality plugs prevents fouling from running too cool and preignition from running too hot
• NGK plugs available for almost every application and riding style

CNC machined oil filler cap with locking clip to keep it in place in the roughest conditions. The cap is pre-drilled and the locking clip is safety wired to the mounting tap with a section of silicon tubing, that will not melt or discolor, over the wire. First class all the way. Available in Silver, Black, Blue or Red.

Genuine Honda replacement oil filter cover gasket.

• Protect your DR650 from overheating.
• Inline temp block kit works with Trail Tech computers Striker, Vapor, Voyager, Voyager Pro, and all TTO temp meters. 
• Installs between the oil cooler and top oil supply line, giving a cooled oil temp reading.
• Includes 3 new o-rings, and 2 longer bolts, as well as the Trail Tech m6x1.0 temp prob.

This holder is the quickest and easiest tool out there to get a grip on that hard to handle hub.

Laser cut to the exact pattern that EBC makes their clutch plates from, it makes loosening and re-tightening the clutch nut a breeze, and minimizes the likelihood of damaging the clutch hub.

Includes all necessary top quality gaskets, and seals for engine rebuilds.

• Meet or exceed OEM specifications
• Highest quality materials
• Rubber coated spring steel head gasket, and soft steel base gasket

Our kit includes 5 EBC friction plates which eliminates the judder spring assembly by replacing it with a 5th friction plate.

Heavy duty clutch springs by Barnett are included it this kit which will significantly decrease wear under high stress conditions.

Repair manual for XR250R '86-'04 / XR250L '91-'96 / XR400R '96-'04.

Complete set of friction plates, HD springs and steel separator plates prevent premature driven plate wear, oil muddying and loss of stack height. Built with swaged aluminum carriers that spread the load on the clutch basket and prevent clutch basket "dogging". Anti-swell, alloy impregnated heavy-duty facings for smooth clutch action. Allows modulation, unlike paper clutches which tend to snatch. Don't forget to add a fresh gasket.

Includes head, base, intake, & exhaust gaskets.

Unless you have managed to bash yours on a rock, this is an item of pure bling, but hey, there is nothing wrong with that! This CNC Oil Filter Cover is made from A7009-T6 aluminum with the 'Zeta' logo machined into the front and anodized in blue to really stand out on your Yamaha. It's also lighter than stock.

Complete Gasket Set includes all the gaskets necessary to rebuild the entire engine and transmission, including valve seals.

Fresh o-rings ensure a tight seal and no oil leaks.

Oil Change Kit includes O-rings for: Filler Cap, Filter Cover, Strainer Cap and Filter Seal.

Valve Inspection Kit includes O-rings for: Valve Inspection Caps, Timing Inspection Cap and Timing Plug Cap.

The genuine Eagle Manufacturing balancer lever kit. All top quality components.

• KLR650s have been known to have problems with the stock idle lever (doohickey) needed to keep tension on the balancer chain - failure of this part can destroy the engine
• The Eagle Manufacturing idle-shaft lever and spring replaces the "weak" stock unit
• One-piece design lever is Machined from 17-4PH hardened, stainless steel to be incredibly strong
• Includes stainless doohickey, and the torsion spring with drill bit. (No longer includes extension springs. The torsion spring is far superior.)

With a Haynes manual, you can do it yourself…from simple maintenance to basic repairs. Haynes writes every book based on a complete teardown of the motorcycle. Haynes books have clear instructions and plenty of photographs that show each step.

• Step-by-step procedures
• Easy-to-follow photos
• Complete troubleshooting section
• Valuable short cuts
• Color spark plug diagnosis

Complete coverage for your Yamaha Trail Bikes covering PW, RT, TT-R and XT225/350 models for 1981 thru 2000.

Fresh O-rings to ensure your XRL stays oil-tight and leak free. The Oil Change O-Ring kit includes a filter cover O-ring and a filler plug O-ring.

Kit includes all seals in the TW200 engine (including crank shaft seals) except valve stem seals. These are high-quality seals made in the USA.

Fresh o-rings to ensure your DR650 stays oil-tight and leak free. Includes one of each: oil filter o-ring, filter cover o-ring and filler cap o-ring

Providing unbeatable performance and exceptional value, Hiflofiltro is the best-selling brand of aftermarket filters for motorcycles, scooters, and ATVs worldwide. The filters are also supplied to original equipment manufacturers as well as private label brands.

Here are the O-Rings you need when you perform an oil change. The largest one and the smallest one go inside the oil filter housing cover. The second largest one goes on your oil drain plug. The second smallest one goes on your oil fill plug. Replacing these O-Rings regularly will help keep your engine from seeping oil.

Put fresh O-rings on your KLR when you do your next oil change. Here you have new ones for the Oil Filler and the Oil Filter Housing Cover.

A direct replacement for the stock KLR hoses that tend to crack and leak after a few years.

These silicone hoses are custom made for us. Silicon hoses operate at much higher temperatures and pressures than other rubbers, they don't perish, and they look great!

Heavy duty springs help prevent clutch slip in high-performance motors.

• Custom wound from chrome-silicon wire
• Preset for long life
• Higher spring seat pressure to resist clutch slip

• The Core Manual TorqDrive clutch delivers unprecedented performance, tuning and durability
• TorqDrive provides more disks in less space, allowing up to four additional friction disks over stock
• More frictions = more torque capacity, thus unlocking the full power of your engine without the need to add stiffer pressure plate springs
• Provides more consistent clutch lever feel and behavior
• Can be set up to maintain a stock, or lighter than stock, lever pull depending on engine tuning
• Rekluse sleeves eliminate basket wear and notching
• Proven in racing at the highest levels
• Made in the U.S.A.

Includes genuine Honda friction plates, drive plates, and clutch springs.

Kit includes feeler gauges and wrench.

RadiusX is a high performance centrifugal auto clutch combining our TorqDrive and EXP technologies. TorqDrive provides more clutch disks in less space, allowing for maximum performance within your bike’s existing clutch footprint. You retain full control of shifting and use of your clutch lever with no compromise in power delivery.

Features:

• Dead-on clutch engagement every time
• Take off and stop in gear without using clutch lever – no more stalls
• Experience maximum power delivery
• Confidently navigate traffic and slow speed conditions
• TorqDrive® clutch pack delivers higher torque capacity and increased power transfer
• Rekluse sleeves eliminate basket wear and notching
• Standard clutch lever function with full override
• No modification to stock components
• Shifting transmission remains unchanged (clutch lever use is recommended for shifting)

Keep yourself COOL with a set of Moto Hoses. Moto Hoses are what you need to handle the heat that your bike is putting out whether you're pushing it to the limit or just stuck in slow city traffic.

Each Kit Contains:

• Color matched carb vent hoses
• Color matched fuel line
• Color matched coolant overflow hose
• Moto Hose is used by Rock River Yamaha and Honda of Troy motocross teams
• Moto Hose for the WR250R/X is available in Blue or White

Designed to enhance mid-range and top-end power. Manufactured using the highest quality standards. No core required.

CNC machined from billet aluminum and then finished in a beautiful gunmetal color. These replace the factory automatic tensioners that can fail. These tensioners eliminate the timing problem that can be caused by the automatic devices. Also gets rid of the excessive tension and premature engine wear caused by the stock unit.

Includes:

• 2 tensioners
• Gaskets

A high quality top end gasket set for the XR650L

Raises compression from stock 9.5:1 to 10.5:1 for more power, torque and snappier engine response. The high quality forged piston from JE is almost a full ounce lighter than the stock cast piston. This makes for less vibration and a smoother running motor. Includes rings, pin, clips, and top end gasket set with valve stem seals and metal base gasket. Fits the standard size stock bore.

Top end gasket set with the addition of a factory Suzuki metal base gasket. A metal base gasket is essential because paper base gaskets will fail in the DR650.

If you need a new clutch, you probably need a new gasket to seal that cover when you are all done. Genuine Yamaha part.

• Allows precise valve lash adjustment without disturbing the setting when the lock nut is fastened
• Knurled knob on adjuster drivers ensure a precise and secure grip
• Integrated repositionable wrench handle holds the lock nut while the drivers are used to loosen or tighten the valve adjustment screw
• Includes 10mm socket with straight slot adjuster
• Fit motorcycles and ATVs with straight slot screw-type adjusters and 10mm lock nuts

Genuine Yamaha replacement gaskets for your side covers.

• Cleanable and reusable filter
• 35 micron stainless steel mesh
• Stainless check ball and stainless spring
• CNC aluminum caps front and rear